"concrete structures"
3,291 results found
Relevance
Showing 325-360 of 383
J&P Balcon Thermal Break for Steel Balconies
J & P Building Systems
A registered LABC detail since 2018, J & P BALCON® is based on JORDAHL® anchor channel technology which has a history of over 100 years proven reliability for connections to concrete. Using quickly installed T-bolt technology, J & P BALCON® is an easily adjustable and thermally insulated connection system that enables accurate installation of steel balconies to concrete frame buildings. These features speed construction and reduce installation costs for many of our clients while assisting designers comply with Part L of the building regulations. This versatile system provides robust, rigid connections across a wide range of load and structural variations.
IP PIR 022 concrete panel system insulation technical datasheet
Recticel Insulation
IP PIR 022 is a high performance rigid polyisocyanurate (PIR) foam insulation board with alkali resistant facings for use in composite concrete panel wall systems.
The product offers a low thermal conductivity of 0.022 W/mK and a high compressive strength exceeding 120 kPa. It is manufactured using a blowing agent with zero ozone depletion potential (ODP) and low global warming potential (GWP), and benefits from a Green Guide rating of A.
CE marked in accordance with EN 13165, Eurothane PC is manufactured to an ISO 9001 Quality Management System and an ISO 14001 Environmental Management System.
Armatherm 500 - Structural Thermal Break Material
Armatherm, a Brand of Armadillo Noise & Vibration Limited
Armatherm™ 500 thermal break material significantly reduces
energy lost from thermal bridging in building envelope connections.
Triton Systems Type C Structural Waterproofing (Cavity Drain Systems) brochure
Triton Systems
A round up of the Type C waterproofing systems supplied by Triton Systems, explaining the differences between each membrane type and their suitability for various applications.
GRC/GFRC Facades – BS 8297:2017 Design, manufacture and installation of architectural precast concrete - Code of practice
AlterEgo Facades (Stone Cladding & GRC Cladding Specialists)
BS 8297:2017 Design, manufacture and installation of architectural precast concrete - Code of practice
This British Standard has been developed to give recommendations and good practice for specifiers and manufacturers during the design, manufacture, transport and installation of architectural precast concrete units.
AlterEgo Facades are a design & engineering led specialist supplier of GRC/GFRC rainscreen cladding systems servicing architects, specifiers, developers & cladding contractors – GRC, GFRC (Glass Fibre Reinforced Concrete), UHPC.
15/H230 Secura Grand Concrete Block Wall System for Reinforced Soil Retaining Wall and Bridge Abutments
Tobermore
This Certificate relates to to the Secura Grand Concrete Block Wall System for reinforced soil retaining walls and bridge abutments, comprising modular concrete block facing units, Fortrac Geogrids, graded granular material and compacted fill. The system is used for the construction of reinforced soil and retaining walls and bridge abutments up to a maximum height of 9 metres.
CERTIFICATION INCLUDES:
• factors relating to compliance with HAPAS requirements
• factors relating to compliance with Regulations where applicable
• independently verified technical specification
• assessment criteria and technical investigations
• design considerations
• installation guidance
• regular surveillance of production
• formal three-yearly review.
WATERSTOP® XP - EXPANDING WATERSTOP WITH XP TECHNOLOGY FOR CONCRETE CONSTRUCTION JOINTS
CETCO
WATERSTOP® XP is the next generation of waterstop that expands upon contact with water to form a positive seal to stop water ingress through cast-in-place concrete construction joints and around pipe penetrations. Through the use of the patented XP technology, WATERSTOP® XP is proven effective in a wide range of contamination environments, including high-saline conditions. Its flexible design also makes it effective for both horizontal and vertical joints.
WATERSTOP® XP is manufactured in lightweight, flexible coils and designed to replace passive PVC/rubber dumbbell waterstops eliminating the requirement of special pieces, split-forming and seam welding.
LoCem® - AACM Concrete Repair Material and Anode Mortar
C-Probe Systems
Product Technical Sheet for LoCem®. LoCem® is an alkali-activated cementitious powder formulation (AACM), manufactured with industrial waste by-products with no heat, which in turn yields a binder that has an ultra-low CO2e.
LoCem produces 90% less CO2e compared to CEM 1.
Over the years we have developed a range of design mixes to provide a range of restoration and build products engineered to extend the whole life of structures through corrosion protection (impressed current and galvanic protection), fire, environmental impact, and chemical attack.
LoCem® can be applied by hand-placement, gun, spray, form & pour, precast.
HODY Composite Steel and concrete Deck Floor System
CDI Innovative Construction Materials Ltd
Hody composite steel deck floor system consists of a modified trapezium shaped profile sheet, 60 mm in height. With additional reinforcement and concrete it is ideal for low composite steel decking, provides a floor height of only 110 mm 290 mm. It is used on free spans of up to 8 m. Hody provides designers to detail floors of minimum thickness of 110 mm, low own weight, spans of up to 8 m, high permissible loads, high point loading, flexible, simple and fast assembly.
Blended Cements
CEMEX UK
Is pure your preferred choice? Better think again. Cemex blended cement 02/03
The blended
benefi
T
Is pure your preferred choice? Better think again. CEMEX blended cement
concrete is more sustainable, stronger and easier to work with. And its
versatility makes it the key to profitability for more and more construction
projects around the UK, from large pours and slabs in buildings to bridges,
tunnels, marine structures and more.
Preprufe Plus - Pre-applied Waterproofing Solutions
GCP Applied Technologies
A high performance, fully adhered, pre-applied waterproofing system for critical below grade applications.
Below ground waterproofing is a standout challenge for any construction project. Leaks from groundwater, storm water runoff or irrigation water may impact the foundation of any building that's improperly waterproofedand when concrete is involved, there are any number of ways that water can travel into and around a structure.
The PREPRUFE® waterproofing system products are specifically designed to perform in critical applications and incorporate Advanced Bond Technology to ensure fully adhered and long lasting product performance. This technology allows the PREPRUFE® system to form a continuous unbroken seal with the concrete for the design life of the project.
Channel and Bolt Fixings
Wincro Metal Industries Ltd
Wincro channels provide positive anchorages for fixing components and allow generous tolerances for setting-out.
A wide variety of stainless steel channel sections and fixings are available for use with our range of masonry supports, windposts, wall ties and restraints.
Channels are available for casting into concrete or for surface fixing to the face of a structure. They are supported by a wide range of fixing bolts and restraint anchors to suit all construction applications.
The use of channels often eliminates the need for the costly and time-consuming procedure of site drilling either concrete or steelwork.
Our channels range includes: Light duty self-anchoring channels for restraining masonry through to heavy duty channels complete with welded wavy tail anchors.
Stravifloor Channel (Concrete) Installation Manual
CDM Stravitec
DECLARATION OF PERFORMANCE REPAIR CONCRETE
Five Star Products
DECLARATION OF PERFORMANCE
ISO 9001:2008 Certificate
Anderton Concrete Ltd
ISO 14001:2004 Certificate
Anderton Concrete Ltd
Grassroof Design Installation Guide
Grass Concrete Ltd
Dense Concrete Common Brick
Marshalls Bricks & Masonry
Concrete Plain Tile data Sheet
Marley Ltd
Declaration of performance XFS8
Naylor Concrete Products Ltd
webercem advanced repair concrete
Saint-Gobain Weber
Sika Icoment concrete repair system
Sika Limited
ISO 14001:2004 Certificate
Supreme Concrete Ltd
ISO 9001:2008 Certificate
Supreme Concrete Ltd
Concrete Terrazzo Porcelain - Technical Data
Terrazzo Tiles
Artro - Linear concrete alternative to clay paving
Tobermore
Artro is a new trafficable paving range providing the option of vehicular access in commercial, public realm or residential projects.
BSI - Factory Production Control Certificate
Whites Concrete
Guide to concrete floor repair
Watco UK Ltd
✓ Why floor repairs are essential
✓ Tips on choosing the right product for your repair
✓ Overview of common damage types
and how to repair them
Hard-Cem Technical Data Sheet
Smart Concrete
Hard-Cem Technical Data Sheet
Comfortable Concrete Retold - Carpet Tile Collection
Milliken
This brochure presents the colour options available in the modular carpet collection with a strong urban vibe. The brochure also includes room scenes and links for technical specifications for the five designs in this energetic design collection. This is a carbon neutral product.
AliRail Concrete-Fix 0.74 kN Option
AliDeck
Nullifire Structural Steel Fire Protection - Product Catalogue
Nullifire – a brand of Tremco CPG UK Ltd
IKO Permatec Hot Melt In-situ Concrete Decks to Receive Technical Data Sheet
AccuRoof
Manufactured in the UK, IKOs PermaTEC is a hot-applied monolithic waterproofing system with excellent environmental credentials and longevity. Suitable for use in most protected membrane roofs (e.g. Inverted or paved roof areas) and structural waterproofing applications PermaTEC is ideal when the deck has no fall. Its lightweight zero waste wrapper dissolves into the compound during the melting process and so eliminates any packaging waste on site.
Two main products are available. PermaTEC Ecowrap is a specially formulated combination of refined bitumen, synthetic rubbers, fillers and other additives. Specifically designed for green roofing applications, PermaTEC Anti-Root is the worlds first monolithic root resistant hot melt waterproofing system.
Carro+® - Galvanic / Impressed Combination Anode
C-Probe Systems
Carro+® GI anodes operate as either a galvanic or an impressed current anodes. They are drilled into the structure is a designed array and used to temporarily polarise the steel with an external power supply. This will move chloride ion from rebar level and into the body of the concrete cover reducing the risk of reinforcement corrosion. Following this impressed mode the system can be switched over to galvanic mode by a aching to steelto provide a bimetallic corrosion cell where the anode then prevents further accelerated corrosion from taking place.
The Goat - Solvent-Free Waterproofing Coating
Intelligent Membranes
The GOAT is a reactive polymer, with quick drying times, and is an innovative solvent-free waterproofing coating. It is applied by brush or roller to form a waterproof and flexible membrane, with excellent adhesion to various surfaces and good UV resistance. It can also be applied on damp surfaces.
The GOAT waterproof coating is suitable for both horizontal and vertical applications and can withstand both positive and negative
water pressure.
Suitable for waterproofing of structures in concrete or masonry such as basement walls, basement roofs, foundations, terraces, balconies and pipe penetrations.
Benito Petrus Concrete Chairs Data Sheet
Pittman™
Showing 325-360 of 383