"window"

To provide optimum weather and thermal performance and to maximise the building’s energy efficiency, ADP Architecture specified a range of aluminium products from Kawneer, installed by approved specialist subcontractor Norman & Underwood. The building’s façade features Kawneer’s AA®100 curtain wall system while AA®190 TB severe-duty doors were specified to handle the high volume of people entering and leaving the building. These were complemented by Kawneer’s AA®720 casement windows with louvreshields which provide both ventilation and fall protection. As the construction is a gateway to the city’s commercial area, the aesthetics were also paramount.

SentryGlas® interlayer provides mproved load bearing strength and stiffness of glass façade for the Enzo Ferrari Museum. Engineering the façade was a considerable challenge. Lighter façade panels enable more subtle supporting structures. For decades, interlayers made of polyvinyl butyral (PVB) have been the industry standard when producing laminated safety glass. Architects are well aware of the possibilities and limitations of such glass when used extensively in façade engineering, for roofing and window panels. In contrast, SentryGlas® enables an entirely new approach because the interlayer is over 100 times stiffer and five times stronger than PVB.

Onyx Apartments is an 11-storey building located on the Regent’s Canal banks, offering 117 bespoke homes. The development was designed as a modern, elegant and professional living environment. Comfort and safety were top priorities in bringing this project to life and Reynaers products were used to realise those aims. CS 86 ‘High Insulated’ aluminium window system offers an energy-efficient option, and CP 155 ‘Lift and Slide’ aluminium door system creates maximum glazed areas while also maintaining comfort. Onyx Apartments is a great example of combining elements of luxury and practicality, bringing a fresh perspective to the area.

Take a look at our recently completed project, Hadrian’s Tower! Standing proudly at 82-metres, it's the tallest building in Newcastle, and it's transforming the city’s skyline.Home to 162 luxury apartments, a premium cocktail bar and fine dining restaurant, Hadrian's Tower is answering the local need for housing in a modern, innovative way. The exterior features CW 65 unitised curtain wall which spans the full height and width of the build, achieving its iconic appearance. And inside, each apartment benefits from floor-to-ceiling and wall-to-wall windows that perfectly frame views across the city.Architect (Hadrian's Tower): FaulknerBrowns

Set within Blythe Valley Park, the new £7.5 Million scheme involved the construction of four mixed-use, high quality apartment buildings to act as a new neighbourhood centre. A high specification glazing package for the 48 one and two-bed apartments included Senior’s thermally efficient double glazed SPW600 windows to keep energy bills low, and Secured By Design SPW600 Doors for main entrances and access to balconies, to give peace of mind.Two of the buildings have ground floor retail space with Senior’s thermally efficient SF52 aluminium curtain walling providing a modern and welcoming façade. 

The Bridle Works building is situated on Cathedral Street in Glasgow and is a 19 storey 414 bed high rise student accommodation building.The building is packed full of amazing features & facilities under Novel Student operations. The facility includes a cinema, a private dining area, gaming room, 'glam' room and on-site fully equipped gym and access to personal trainers.The external façade has been finished with a number of Aluprof products including MB-SR50N EI curtain walling, MB-86 windows and MB-78 EI fire rated glazing systems.Architect: Manson ArchitectsMain Contractor: Watkin Jones Group

Schooner Wharf is the first open market scheme to be developed by Cardiff Community Housing Association (CCHA), who were working in partnership with main contractors Morganstone. It features 32 two, three and four bedroom affordable homes, alongside a seven storey waterside apartment building/ AluK products have been installed throughout in contemporary Anthracite grey, including fully suited 58BW and 58BD windows and doors, GT55TB commercial entrance doors and SL52 curtain walling. These all met the performance specifications laid down by the architects Austin Smith Lord and had the benefit that they could provide a coherent, fully suited look.

This mixed use development on the southern fringes of the Olympic Park utilised the Nexus® system to achieve flawless brick-faced soffits to the hundreds of door and window heads. Nexus is a two-part brick soffit system that combine a high integrity stainless steel brickwork support system with custom-designed prefabricated brick faced soffit units. Being 70% lighter than traditional cast concrete solutions, the Nexus soffit system is simply lifted and bolted into position by hand and, as the brick slip facing is manufactured from the same batch as the main brickwork, presents a perfect colour and texture match for flawless transitions.

After a particularly contentious and protracted planning process, this semi-detached, red-bricked house, part of a group of five properties that form Regent’s Mews in affluent London NW8, finally boasts an impressive third storey extension as a result of the erection of a mansard roof.The new dormer windows to its front aspect lend this 1980’s property a delightfully modern aesthetic, whilst the provision of a green roof to the rear aspect underlines its eco-credentials. The installation of Glazing Vision’s elegant sliding-over fixed rooflight above the stairwell, together with 4 additional fixed rooflights, has maximised the light streaming into this new living space, and also provided an all-important source of ventilation.Initial proposals to convert this house from two to three floors were rejected way back in 2001 by the local Planning Department on the grounds of it being “visually intrusive, overbearing massing not part of the existing architectural language and overlooking neighbours”. These same considerations faced Robinson Leigh Architects, whose track record of successful planning application had led to their appointment in 2013 by a client keen to find a solution to the planning impasse.There were a number of challenges for the architects, as they sought to design a scheme that would prove more successful through planning. The house is situated in St John’s Wood Conservation area, where restrictions on the character and appearance of all buildings are strictly applied. Normally any roof extension in this area would not be permitted and the house, indeed the entire mews, had been identified as an “unlisted building of merit”. Consequently the planners insisted that all new work to the house “must match existing original work in terms of choice of materials, method of construction and finished appearance in order to maintain the cohesion of the mews.The variety of roof forms in the mews, however, presented an opportunity for the architects to put forward their proposal of a flat-topped mansard roof as “a modern interpretation of the surrounding architectural precedent” said Leigh. Critically, the new mansard roof would also not add height above the general roof level of the neighbouring properties in Regent’s Mews, and thus would not be visually intrusive. The design of the three new dormer windows at the front of the house did depart from that of the dormer windows on the other mews houses though – they were square in contrast to the prevalent curved headed windows. However, given that they were really only visible from within the actual mews, the planners considered this alteration in form to be acceptable. Furthermore, the recessed glazing of the dormer windows ensured that the privacy of the occupants using the living spaces would not be compromised.The choice of materials also had to conform to the surrounding properties: the dormer windows were lead-clad, and the roof was tiled in Welsh slate, which softens its appearance and reduces the “apparent bulk of the structure.Another complication for Robinson Leigh related to the impact upon the large villas of Langford Place to the rear of the property. Vehement objections from these residents, who were concerned that the roof extension would shatter the illusion that they are set in extensive grounds led the architects to revise their proposal: the pitch of the northwest slope of the mansard roof was adjusted to a 70 degree angle in order to reduce its prominence in the views from these villas, particularly from 5 Langford Place. A second flat roof, which adjoined the house was removed, and Robinson Leigh extended the mansard roof to the parapet. This then gave the client more internal space, eliminated any overlooking issues, and created a more homogenous and symmetrical design.The architects cleverly designed both the main roof level of the mansard to be landscaped with indigenous flora in order to respect the planners’ preference for ecological biodiversity in the area as well as to attenuate water run-off.In conjunction with these structural requirements imposed on Robinson Leigh’s design of the mansard roof, unlocking natural daylight in the “dark zones” in the interior of the new storey was a key priority. Mindful of the rejection of the glazed roof proposal from 2001, which the planners had deemed to be too intrusive on the neighbours and at odds with the surrounding architecture, the architects sought to reduce the amount glazed by 50%, whilst simultaneously addressing the problem of reduced levels of natural daylight resulting from the recessed dormer windows.Robinson Leigh’s solution was to propose a more sympathetic glazing arrangement to the flat-top of the mansard roof, comprising four large fixed rooflights and a sliding over fixed rooflight from Glazing Vision, that would achieve the high specification they desired. These rooflights, pointed upwards to the sky, would maximise the amount of daylight entering the extension and bouncing off the hardwood timber, which had been used extensively, as Leigh points out, to “draw together several disparate elements of the interior design, such as the sliding walls, pocket doors and floor-to-ceiling shelving and cupboards”.Glazing Vision’s sliding over fixed rooflight was to inhabit the space immediately above the stairwell, which had also been lined in timber to subtly link the top floor with the ground floor and to help draw the eye upwards. Timber frames had also been used on the windows. As with the other four rooflights, Glazing Vision’s sliding over fixed rooflight needed to be made to a bespoke size – the architects required it to be the exact size of the stairwell, or indeed over-sized, so that the frames were not visible from below. Precision-engineered at the Glazing Vision factory in Norfolk, the special sliding over fixed rooflight was supplied in two sections, with an overall span of 2400mm and a width of 2240mm. The minimalist internal framework, finished in pure white rather than the standard grey, ensured that there were unfettered, sky-only views from the inside, thereby enhancing the impression of space and loft. Through the clear glazing of the Glazing Vision rooflight natural daylight absolutely flooded the stairwell, permeating also down to the lower floors.Given the stringent planning controls on the appearance of the mansard roof and the concerns of the vociferous neighbours, Glazing Vision’s sliding over fixed rooflight offered another invaluable benefit to Robinson Leigh. The footprint of the unit on the roof remained fixed, both open and close. This meant that there was no bulky additional furniture required, whilst the minimalist exterior framework was finished in slate grey to blend harmoniously with the Welsh slate roof tiles.No less important was the need for natural ventilation in the mansard roof extension. The architects were keen to create a venturi effect in the central core of the house and stairwell by channeling the airflow through the opening of the rooflight. The Glazing Vision rooflight, specified by Robinson Leigh to slide side-to-side rather than up and down, is electronically controlled at the touch of a button from inside the house, retracting the sliding section over the fixed section of glazing. Once the sliding section is fully retracted, there is a 50% clear opening in the rooflight, out towards the sky, thus providing superior air quality within the top floor, as well as intensifying the amount of natural daylight. An essential security feature of the Glazing Vision sliding-over fixed rooflight is that it is supplied with a manual override as standard.The design, approval and erection of the mansard roof extension took three years but Robinson Leigh have succeeded in updating a tired-looking 1980’s mews house with a new, sophisticated, modern exterior, that quietly complements the surrounding properties. The new third storey has exceeded the client’s needs for additional living space, and the clever use of rooflights has ensured the interior is light, bright and inviting.

The newly renovated Grade II* Listed 3-5 Priory Row are a collection of stunning cottages which date back to the 15th Century. As part of the works, Selectaglaze were sub-contracted to manufacture and install the secondary glazing units for thermal and acoustic insulation.38 units were produced from across the slimline range of secondary glazing; Series 10 – 2 and 3 pane sliders were used for the smaller windows and 4 pane horizontal sliding units for those spanning just shy of 2 metres. Series 45 hinged casements were installed, a couple of which were glazed with satinovo glass to provide privacy.

A few kilometres from Copenhagen, where history blends with modernity generating new currents and trends in total respect of the environment, Atlas Concorde’s green philosophy fully satisfies the requirements of a private villa in Karlslunde, with a strong contemporary style.The large windows that overlook the outdoor green area illuminate the minimal geometries of the structure, enhancing the elegance of Trust in Silver colour; its texture, inspired by quartzite and Luserna Stone, is particularly suitable to celebrate the design potential of this house. The seamless flooring obtained with 60x60 cm format tiles, alternates with the matching 30x30 cm mosaic that characterises the counter and the scenographic walls, enhancing the clean and rigorous lines of the spaces.

The extended structure of the Isaac Newton Building in Lincoln houses the Schools of Computer Science, Engineering, Mathematics and Physics which offer unrivalled scientific and engineering facilities for students. This includes new seminar rooms and computer labs in addition to state-of-the-art technology and research rooms, complete with a semi-anechoic chamber.Playing a significant role in creating the curved appearance of the building was our visible grid aluminium curtain walling. This durable and versatile system can be applied to flat or faceted facades and is available in a choice of glazing gaskets and larger glass sizes. Aluminium windows were also installed throughout the building for modern design and complete weather protection.

The new Brookfield Business School 7-acre Campus brings together a sympathetically restored, 19th century mansion with a new three-storey three-gabled, copper clad extension and elliptical lecture theatre. Senior’s slim profile SF52 thermally enhanced curtain walling and SPW600 Windows were used throughout the extension to create a comfortable, light and airy environment. For the main entrances, Senior’s robust SPW501 Commercial Doors provide both security and longevity for these high traffic areas. This was a complex project which required precision, close co-operation between all sub-contractors and 3D BIM modelling to ensure co-ordination of all the elements involved.

Woodcote House is the contemporary, carefully designed and sustainable replacement for what was previously a series of buildings that had fallen into disrepair amongst the beautiful scenery provided by the South Downs National Park.Designed by Design Engine and Paul Cashin Architects, Woodcote House consists of four large bedrooms, an open plan living, dining and kitchen area and fitted with bespoke joinery the interior is flooded with natural light. Huge windows that allow for picturesque scenes to filter into the internal spaces.Freshfield Lane’s First Quality Multi were used to provide a homage to the original brick buildings that sat on the site prior to development, as well as allowing the structure to impact the environment minimally.

Abbott Nutrition develops and markets a wide range of science-based infant formulae & medical nutritionals. Abbott nutrition required hygienic door solutions, windows and transfer hatches for its new manufacturing facility. The factory it the country’s fifth facility under Nestle and is considered to be among the company’s most advanced worldwide.  Dortek supplied Fire rated single action and sliding doors across the facility. Their smooth and seamless construction means there are no ledges where bacteria can gather. Our encapsulated doors are hygienic, easy to clean and 100% waterproof. Dortek GRP doors are ideally suited to milk processing areas and have been installed in facilities worldwide.

Raybloc (X-ray Protection) Ltd takes great pride in presenting our latest case study showcasing our outstanding collaboration with Singleton Hospital in Swansea. This partnership entailed the manufacturing and installation of cutting-edge radiation shielding solutions, including a Frameless Operator Screen, a wide range of lead-lined doorsets, and internal viewing windows to match. As well as these fixings, Raybloc also supplied and installed the lead-lined wall panelling to the controlled areas, making the process of lead shielding as simple and hassle-free as possible for the contractor and Trust. These advanced products not only prioritise the safety of patients and staff but also significantly enhance workflow efficiency and create a therapeutic environment.

Catnic's lintels have given definition to Beaumont, a stunning Country and Coast Homes development of 6 large houses in Highcroft, Exeter. Approximately 60 1.25inch CX cavity lintels were supplied, which support the sharp, unusual shape of the architect-designed buildings, were chosen for their strength, reliability and thermal capabilities.The lintels support the exterior window and door features; special corner lintels support the external over-eaves, while large window openings elegantly contour the shape of each house. Chosen specifically to support the specialist architectural features of the development, offering both the structural and thermal performance required for the building envelopes.Constructed using the traditional brick and block method, the building facades were then finished with a white K-render to all external elevations.Consistent with Country and Coast Homes' portfolio of luxury contemporary homes, the development features superior quality fixtures inside and out. As a brand synonymous with quality in the construction industry, Catnic reflects this too. County and Coast Homes focuses on exceptional attention to detail, it only uses the most reliable and durable products in the construction of its homes. Chris Dodge at County and Coast Homes said: "We have been using Catnic Lintels for over 10 years, they are by far the best. A superbly well organised company who offer exemplary service, their lintels are extremely capable and well suited to our high quality homes."Country and Coast Homes prides itself on a high level of sustainability in each development. Catnic lintels surpassed the energy targets in this particular development by helping deliver the efficiency required to achieve a B on the EPC rating.

The new £100m Heatherwood Hospital in Ascot, Berkshire has been designed by leading architects BDP to put the wellbeing of patients and staff at its heart. The new state of the art building comprises a multitude of resources, from treatment rooms to operating theatres, day and out-patient facilities and specialist x-ray, MRI and radiology services. The overall design of the hospital has been greatly influenced by the woodland that surrounds it, with our aluminium fenestration systems framing the expansive views and maximising the use of natural light.The ’open’ design of the building has been created using our slimline SF52 aluminium curtain wall system, with the ground floor areas benefitting from our robust SFG shop front glazing system and integrated SD commercial doors. To provide safe and secure access, our SPW501 aluminium commercial doors were chosen for the main access points and our thermally efficient SPW600 aluminium windows were used throughout. All our aluminium fenestration products were expertly fabricated and installed by our supply chain partner Soundcraft for main contractor Kier.The use of our energy-efficient aluminium windows, doors and curtain walling complements the new hospital’s other sustainable design features which include photovoltaic solar panels and a green nature roof to manage rainwater absorption. Our technical team and locally based architectural advisor were also on hand to provide specification support and guidance, including help with U-value calculations and Part L compliance.The new-build hospital replaces the older dilapidated building that will be demolished to make way for a new housing development.

Just a stone’s throw from Baden-Baden’s famous festival hall, a trendy and exclusive hotel has opened its doors in the name of Hotel Roomers. The hotel’s rooftop bar is a stand-out feature. Its lightweight steel canopy connects to the main concrete structure with Schöck Isokorb® type KS elements to minimize thermal bridging in the construction. And when it comes to getting a good night’s sleep, the stairwells are fitted with Schöck Tronsole® to stop impact sound transmissions and ensure a restful stay. The building itself is a hotel, medical centre and apartment block all in one, and its radiant white facade complete with full-height windows creates a striking effect. But the real highlight is how the facade changes its appearance depending on the guests decision to shut out the light in their rooms using the integrated window shading systems. It is not just the facade design that makes this hotel so special, but also its energy concept, which is testament to its ambitious efficiency targets. A crucial component of this concept involved minimising thermal bridges, which were a concern in the hotel’s landmark cantilevered entrance canopy. Without the Schöck Isokorb® type KS elements, it would have been difficult – if not impossible – to build the cantilevered element so efficiently and to decouple the structurally challenging thermal bridge at the point of connection between the freely cantilevered steel girders and the reinforced concrete slabs. All stairwells within the hotel feature the Schöck Tronsole®, which allow it to live up to the high expectations of the investors and building owner Franz Bernhard Wagner in terms of both energy-saving aspects and – of course – sound proofing.

Tiny Houses are on trend. Downsizing, sustainability and the desire for affordable housing are the three most important reasons why miniature houses are rapidly gaining in popularity in Germany. More than one tenth of single people considering home ownership are currently interested in this kind of Tiny House - according to the "Livee Tiny House market study 2021". And you don't have to go without your home comforts. The Tiny House with solutions from SIEGENIA proves this.Save precious spaceWith this well-thought-out use of just 16.5 square metres of floor space, the solutions from SIEGENIA have made a significant contribution to the favourable response to the Tiny House. For example, the sliding hardware, ECO SLIDE, saves valuable space behind the sofa because the window sashes do not swing open and closed but slide to the side instead. Every centimetre of living space can therefore be used. Room comfort solutions from SIEGENIA are also installed in the remaining windows. Here the tried and tested TITAN fittings provide smooth operation and ease of use. As TITAN vent secure, it combines this in the bathroom with efficient burger resistance in accordance with resistance class RC2, even in the tilted position. Whereas in the loft, it demonstrates its versatility as hardware for an especially narrow, elongated element.And finally in the kitchen area, the AEROPAC wall-mounted vent unit guarantees demand-based ventilation even when you are out and about. The ventilator with its elegant design not only operates incredibly quietly, it is also equipped with sound absorption, which provides a quiet home in noisy environments.

Heritage Vacuum Glazing: A Transformative Case Study for Renovating Listed Buildings and Conservation AreasIntroduction:Renovating heritage properties, including listed buildings and those in conservation areas, presents unique challenges in balancing preservation with modern standards of energy efficiency and sustainability. In this case study, we explore the application of heritage vacuum glazing as a solution for renovating a historic listed building, showcasing its transformative impact on architectural preservation and performance improvements.Case Study: Renovating a Historic Listed BuildingBackground Information:The case study focuses on a remarkable historic listed building dating back to the 18th century. Situated within a conservation area renowned for its architectural significance, the building exhibits exquisite craftsmanship and unique architectural details. However, the existing single-glazed windows posed challenges in terms of thermal inefficiency, noise penetration, and condensation issues.Challenges Faced:The architectural team encountered several challenges during the renovation process. Striking a delicate balance between preserving the building's historical charm and incorporating contemporary elements that enhance functionality was paramount. Compliance with conservation regulations was crucial to ensure the preservation of the building's original fabric and character.Selection of Heritage Vacuum Glazing:After careful consideration and collaboration with conservation specialists, heritage vacuum glazing emerged as the ideal solution for upgrading the building's fenestration. The slim profile of the glazing units closely resembled the original windows, ensuring minimal disruption to the building's architectural aesthetics. The vacuum glazing technology offered superior thermal insulation, acoustic performance, and condensation control, aligning with both conservation requirements and performance objectives.Installation Process and Considerations:During the installation process, the architectural team collaborated with specialist manufacturers experienced in heritage vacuum glazing. Meticulous attention to detail was crucial to seamlessly integrate the new glazing units with the existing window frames while preserving the historic fabric. Preservation techniques were employed to minimise any damage and maintain the building's authenticity throughout the installation.Benefits Achieved:The implementation of heritage vacuum glazing resulted in a multitude of benefits for the renovated listed building. The enhanced thermal insulation significantly reduced heat loss, leading to improved energy efficiency and reduced heating costs. The upgraded windows provided exceptional acoustic insulation, creating a peaceful indoor environment despite the bustling surroundings. Condensation issues were effectively addressed, preventing damage to the building's interior finishes and improving occupant comfort and well-being. Furthermore, the advanced security features of the vacuum glazing enhanced the protection of the building, safeguarding its historic fabric for future generations to appreciate.Testimonials and Feedback:Architects, specifiers, and building occupants expressed their satisfaction with the outcome of the renovation project involving heritage vacuum glazing. Architects praised the technology for seamlessly integrating with the building's original design, while specifiers commended its compliance with conservation regulations. Building occupants enjoyed the improved thermal comfort, reduced noise intrusion, and enhanced visual clarity provided by the heritage vacuum glazing. Their testimonials underscored the success of the solution in achieving a harmonious balance between preservation and modern comfort.Conclusion:This case study highlights the successful application of heritage vacuum glazing in the renovation of a listed building within a conservation area. By effectively addressing the challenges of thermal inefficiency, noise penetration, and condensation, heritage vacuum glazing emerged as a transformative solution. Its ability to preserve architectural aesthetics, enhance energy efficiency, improve acoustic insulation, and safeguard historic fabric makes it a preferred choice for architects and specifiers involved in renovating heritage properties.Through careful consideration of factors like compatibility, authenticity preservation, compliance with regulations, collaboration with specialists, and professional installation, the transformative potential of heritage vacuum glazing can be realised, ensuring a harmonious blend of historic authenticity and modern performance.

Forming part of one of the largest and most ambitious regeneration projects in Europe, Mustard Wharf is a new residential Build to Rent development overlooking the Leeds-Liverpool Canal.The £55 Million scheme features 3 buildings housing 247 stunning 1, 2 and 3-bedroom boutique rental apartments plus communal roof terraces, gym, working spaces, and clubhouses.An impressive central atrium was created using Senior’s thermally enhanced SF52 curtain walling with secure access via SPW501 doors. The apartments feature floor to ceiling energy efficient PURe® windows whilst PURe® SLIDE doors lead to the balcony providing a light and comfortable environment. 

When refurbishing a building in the heart of London, innovative building solutions and construction processes are necessary. That’s why Schüco FWS 50 curtain walling and AWS 70.HI side-hung windows were specified for the renovation of University College London Hospital’s (UCLH) Ear, Nose & Throat Department.Being located in such a central and busy area, it was decided that a prefabricated façade system would be the ideal solution. The key challenge was for this system to be installed as a complete unitised panel on site while still using a standard stick system.The building façade comprises 28 prefabricated bays, each 4 m wide, constructed as hybrids of traditional hand-made bricks, precast concrete, aluminium and glass.

The first phase of the Middlewood Locks project in Manchester by developer Scarborough International Properties features Kawneer’s AA®100 zone-drained curtain walling, AA®130 brise soleil and AA®720 external doors on the ground floors of six blocks of apartments around three large basins of the Manchester, Bolton and Bury canals.The AA®130 brise soleil has also been used between external balconies as privacy screens and was complemented by Kawneer’s AA®3572 lift/slide doors and AA®720 thermally-superior side-hung casement windows which feature on the first floor upwards of the seven-storey blocks.

Alison Park Hotel is a conversion of a former hotel to a complete renovation of the building creating ten new apartments and a townhouse. The project also included a new building extension to a further townhouse, as well as a revamping of the garages into 3 cottages. Situated in the centre of the picturesque and well-known spa town of Buxton, Alison Park Hotel benefits from features such as mock timber framing, and oriel windows and doors.Cellecta ScreedBoard 28 was specified for this project due to its unrivalled performance. The unique interlocking edges on our ScreedBoard 28 mean that no screws are required, making it easy to install, a convenience on site saving installation time.Amos Group was awarded this 1,500m² contract to develop this refurbishment and extension.

Kings Road is a combination of luxury residential apartments and commercial facilities situated in central Brentwood. With a combined size of 990m², these 15, one and two bed apartments have good transport links, with proximity to Brentwood’s Mainline Railway Station to London Liverpool Street. The arrangement of windows on the building partners with the adjacent buildings, creating a strong presence in the street scene.Cellecta ScreedBoard 28 was specified by Arcady Architects Ltd in this project for all the apartments. ScreedBoard 28 is an award-winning composite acoustic overlay treatment; it’s high density and unique resilient layer provide unrivalled acoustic performance, typically 5dB better than legislative requirements.Horizon Construction was awarded the contract to construct these modern apartments.

Location: Solihull Project Type: Residential Development Cost: £47m Product: Balcony Cladding, Window Cladding, Rainwater Pipes Finish: Syntha Pulvin RAL 7016 Anthracite Grey Satin Fire Rating: A2 s1, d0 Non-combustible (Reaction to Fire EN BS 13501-1:2018) Product: Shadex 150 Solar Shading and Privacy Screens Finish: Powdertech’s PWF1 Timber-effect polyester powder coating Fire Rating: A2-s1, d0 (EN BS 13501-1) Client: The Solihull Retirement Village in partnership with the ExtraCare Charitable Trust Architect: DLA Architecture Main Contractor: The Vistry Group Sub Contractor: MQM Fabrications

VANDALISM to schools’ property is a continuing issue but one that is being addressed by Premier Security & Fire Ltd.Working in partnership with Swedish company Hammerglass, Essex-based Premier is providing security options that include unbreakable glass for windows and doors. Several London schools and colleges that have been repeat victims of vandalism have already engaged the company to replace existing installations.Hammerglass is 300 times stronger than traditional glass and weighs half as much. Premier Security & Fire Ltd manufacture and install their own designs, including security options that reach counter-terrorism threat level.If you would like more information, call us on 0208 559 8295.#UnbreakableGlass #SchoolsSecurity #Facades

Back in late 2020, America was preparing for a potential civil unrest as the Presidential Elections came to a head, specifically big cities like New York and Washington DC. With this civil unrest came the small percentage of the population that use this as an opportunity to loot stores. So, with many high-end store on 5th avenue, many opted to board up their store, windows and possible access points to prevent such a thing. However, one store understood that board could easily be ripped down and used as barricades against the police once entered the site. They alternatively opted to use our FenceSafe Securus SR1 System to protect themselves against civil unrest and allow for business continuity.

Located on a former industrial site bordering Birmingham’s Jewellery Quarter Conservation Area, this unique mixed-use development delivers 390 one, two and three-bedroom apartments, commercial offices, retail outlets and a new railway ticket office, in addition to much needed new facilities for the city’s world-famous jewellery sector. Sandwiched between busy railway lines and a public highway, and bounded by two historic cemeteries, the seven-building development varies in height between 3 and 7-storeys. It has been sympathetically designed to reference the area’s industrial heritage, with imposing brick facades, deep-set windows and distinctive archway detailing recreating the aesthetic of the historic warehouses that once defined the site.

Utilising several innovative Glazing Vision rooflight products combined with some insightful architectural design detail from Chiles Evans & Care Architects, along with bespoke high specification finishing from Terry Huggett Developments, this retro-modern home is simply stunning, and even featured on Channel 4's Grand Designs.The 1970’s were a revolutionary period of acceptance and moving forward as a society, with many important social movements being founded in this decorated time. Along with this, the 70’s also had a huge influence on the interior and exterior of buildings all over the world. 70’s vogue has also had a heavy effect on modern interior and exterior design. Ranging from complex designs of wallpapers, to simple yet effective patterns on rugs, retro designs are becoming more and more popular in present times.Solidifying this proposal is Ravine House, a retro-contemporary build where Glazing Vision, Chiles Evans & Care Architects (CE & C Architects) and Terry Huggett Developments have collaborated together demonstrating the enduring quality of 70’s design.The original house, built in 1967, adopted a mid-century American exterior; with large windows looking out at the surrounding gardens that were framed by wide eaves and a low-profile roof. Taking inspiration from Frank Lloyd Wright, and other famous Architects from the mid-20th century, the house showcases a real ‘wow factor’. As conversations with the homeowner quickly progressed it became apparent how special this home truly was.The project was separated into three parts. Two stock sized Flushglaze Fixed Rooflights were the first port of call for the homeowner and the architect. It was imperative that any changes made to the original exterior of the house did not impact the simplicity of the roof lines, therefore the Fixed Flushglaze Rooflights were selected.The double pitched roof meant that it was not possible to set the rooflight into the roof pane without compromising the water-proof integrity of the roofing. However, the Flushglaze’s simple frame means that although they sit proud of the roof, they remain visually unobtrusive. The standard Flushglaze Fixed Rooflight is a very popular item in our wide range of products, with a minimum span and width of 400mm and ranging to 4200mm subject to area m2 limitations. In this case, the Flushglaze Fixed Rooflights were both 1200mmx 900mm. With a frame colour of RAL 7015 (Slate Grey), they bring a simple yet highly effective essence to the property. Deciding to purchase a stock size Rooflight, rather than a bespoke size can be a much more cost-effective option.The second part involved a singular stock sized Pitchglaze Roof Window. Adopting our pioneering ‘frameless’ design ethos, once installed, this product provides the building occupants sky only views through the aperture, something not usually found with a traditional roof window without requiring an upstand. As a roof window it is UKCA and CE marked and designed to be installed in pitched tiled roof applications flush with the tiling line and to be used at roof pitches between 15° and 60° and comprising of Qualicoat approved polyester powder coated aluminium framework. The Pitchglaze can also be supplied in either landscape or portrait orientations. In this case, the Roof window sat at a 22° angle with “vision area” dimensions 1000mm x 3000mm.The third part of the project consisted of a solitary Triple Glazed Flushglaze Rooflight, with three Wall Abutments. The homeowner opted to go “made to order” for this luxurious item, with a span of 1205mm x 2825mm. The Wall Abutment detail is part of the Flushglaze framework and is secured using suitable fixings, that depend on the structure being used. The Flushglaze range of Rooflights have been independently performance tested and approved by the British Board of Agrément (BBA) and are also classified by The Official Police security initiative, Secured by Design and tested to LPS2081/1 with certification by the Loss Prevention Certification Board. This helps to enhance resistance to opportunist intruders attempting ‘stealth’ attacks to gain entry, which are often carried out in residential areas.‘For me, this project is simply a once in a lifetime opportunity and I enjoyed every minute of it’ Terry Huggett, Terry Huggett Developments.The project brings with it a unique element of family. With the homeowner inheriting the house from his parents – Terry Huggett cites that his love for mid-century American architecture stemmed from family holidays to places like California, and other cities and states in western America. This connection with the project for both Architect and Contractor, along with their personal chemistry is obvious, as is the care and precision of the build exhibited everywhere within the residence! The home also boasts many different structural qualities that distinguish it from other houses up and down the country. From a heated driveway to a Borehole that provides ‘Evian quality’ water from tap, the home showcases many unique and desired aspects.Overall, the project took approximately three years to be completed. Now, Ravine House is gaining publicity up and down the country and has been nominated for various RIBA awards. It is visually clear that the home is something truly special that simply defines quality and displays an incredibly high level of Architectural and Contractual ability.

The heat efficiency of a Grade II listed Georgian townhouse in the historic city of Bath is set to be dramatically improved as a result of the introduction of Spacetherm® Multi insulation.The challenge of dealing with heating inefficiencies, major heat loss and high heating costs are a common problem with many listed buildings and solid wall dwellings.Property owner Mike Mower explains, “I obtained planning permission to insulate the top floor of my Grade II listed Georgian townhouse as it is single skin 6” Bath stone (Oolite) and very heat inefficient, all walls have the original lime render and skim and so they need to breathe. The property in Bath was built in 1818 and has been in my family for 101 years since 1919! I am the 3rd generation to live in it and it was last renovated in 1935 so it needs serious upgrading!“The architect originally specified another insulation but this would have required encroaching 100mm into the room and would necessitate moving door frames and rebuilding window reveals. After extensive research, I identified the Spacetherm Multi aerogel product from the A. Proctor Group.“The architect was so impressed by the thermal efficiency of the Spacetherm Multi. With a total thickness of 20mm when rendered, this will not encroach onto the floor space, and the door frames and windows will not need to be altered. Subsequently we included Spacetherm Multi on the planning application as an alternative to the traditional insulation originally specified, which was approved by the Conservation officer and building control.”In addition to the Spacetherm SLENTEX® A2 blanket, foil encased Spacetherm A2 (CBS) Cold Bridge Strip was also included at window and door junctions to address areas susceptible to cold bridging.Spacetherm Multi is a high-performance laminate specifically designed to be laid directly onto existing floors & walls. Spacetherm Multi consists of Spacetherm Aerogel insulation blanket bonded to a 6mm Magnesium Oxide Board.At just 16mm thick, the use of Spacetherm Multi has virtually no negative impact on floor space, making it ideal for refurbishment projects where space is at a premium.Typically, a solid wall will have a U value of around 2.1 W/m2K. Following the application of Spacetherm Multi, this can be reduced to around 0.8 W/m2K, dependent on the wall structure.Finally, Mike Mower commented “I think Spacetherm Multi is ideal for listed building insulation as it has a minimal effect on the infrastructure of the original building. It has the potential to be used extensively in old buildings such as we have in Bath where heat loss is at a maximum, the original walls need to be able to breathe when insulated and insulation has hitherto been impossible due to the visual impact encroaching on the listed building. I am also seeking planning permission to use the product to insulate the basement floor and walls.”

Glazing Vision have worked on a number of projects with Architects, ARCHEA, who are Victorian house experts specialising in adapting period houses into modern homes. These homes regularly demand an uplift in natural daylight, and Glazing Vision have formed a great relationship with ARCHEA to help transform many of their projects into well-lit, healthy, and happy environments for a number of families.These particular homes are all located within 10 minutes of each other in Hackney, London, with all clients looking to transform their period property into a contemporary home. Each project involved an extension and required a significant increase in natural daylight to help better the health and wellbeing of the families residing in each home which is where Glazing Vision stepped in.“When adding a ground floor extension, we often need to include rooflights to add light and views both to the new spaces and existing rooms in the home. Whilst fully glazed roofs can be used, this approach typically incurs more cost and extended lead-times due to the glazing being bespoke and needing to be made to order. By using large format, off-the-shelf rooflights we can incorporate extensive areas of glazing, but at a much lower cost and faster turnaround. We then use these in combination with traditional roof construction techniques, which are simple to construct and maintain.” – Richard Skinner, ARCHEA.ARCHEA regularly specify Glazing Vision’s Flushglaze Fixed Rooflight, a minimalist product with ‘frameless’ internal views designed to allow as much natural daylight into a room as possible. When working with pitched roofs, ARCHEA often opt for the Glazing Vision Pitchglaze Fixed Roof Window which is designed to be installed in pitched tiled roof applications flush with the tiling line, providing you with a vast amount of natural daylight.“We initially chose Glazing Vision because of their wide range of high-quality rooflights, and since working with them on a number of projects we value the help of their Technical Sales Team who are always on hand for technical support. We typically use the Flushglaze Fixed units as the extensions we work with usually involve a flat roof for practical and planning reasons and the Flushglaze offers the largest and best value standard glazing solution on the market. The standard aspect is vital for us as we are often looking for short lead times, and so this element adds so much value. When working with pitched roofs we instead use the Pitchglaze Fixed Roof Window which fit flush within the roof offering a sleek finish.” – Richard Skinner, ARCHEA.You can purchase our off the shelf rooflights and roof windows via rooflights.com, our online rooflight shop!Photography: Mai-ling Leung of ARCHEA

Woodlands is a high-quality retirement scheme of 17 luxury apartments by PegasusLife, now part of Lifestory, in exclusive Canford Cliffs, Dorset. Designed by Snug Architects, the building’s striking, contemporary form is crafted to include a carefully specified combination of whitewashed, vertical timber cladding, glazed balconies, bronze-coloured windows and white Antro facing brick slips from leading brick innovator, Vandersanden. “It was the team at PegasusLife that first suggested using Vandersanden brick slips,” explains Mike Worthington, director at Snug Architects. “The very stylish Antro brick complements the whitewashed timber cladding and the bronze metal colour of the windows very well to provide an incredibly mature material palette.” Within walking distance of the beach, Woodlands stands on Flaghead Road amongst age-old pines. The building’s architecture was inspired by its setting and, although bold and contemporary, relates harmoniously to the scale of the surrounding housing. The structure was conceived as a three-storey modern brick envelope with a basement car park that has lift access. Woodlands was built using a reinforced concrete frame construction. Instead of traditional brickwork, Gebrik Brick Cladding Panels featuring Vandersanden’s Antro brick slips were supplied by Aquarian Cladding for the project. These were constructed off-site and installed straight onto the building frame. By using Gebrik panels, the aesthetics of the building were maintained as originally designed while minimising on-site works. A further advantage was that the build programme was more efficient than with traditional construction as the building was watertight more quickly, so interior spaces could be fitted out in tandem with work to the exterior. To complete the facade, Antro brick pistols and splayed/canted brick specials were employed with the bricks wrapped underneath the soffit of window and balcony openings. Vandersanden’s Antro stock facing bricks have a sanded-coated and creased structure. They are a mix of different kinds of clay forms and made with 100% natural resources; the loam that forms the most important base material dates from the Ice Age. By using specific sand types for the surface covering, the desired colour is achieved. Mike Worthington says: “The Vandersanden bricks are good quality and provided the basis for a beautiful and mature materiality for this retirement living development which we were delighted with. They’ve weathered very well and we’re regularly complimented on the scheme and asked who supplied the bricks. We’re very proud of it.” Canford Cliffs is an affluent suburb of Poole with a significant population of retired people. PegasusLife is a retirement living provider on a mission to fundamentally re-think retirement living in the UK. Unsurprisingly, Woodlands was shortlisted for the 2017 RIBA South West Awards. Further details on Snug Architects are available at https://www.snugarchitects.co.uk. To find out more about the bricks used in this project or to see the wide range of high-quality bricks available from Vandersanden, click on the 'View more' link 

Ryno Signature Decking in ‘Silver Birch’ takes pride of place in this new Brentwood development. The apartment block has a bold red brick exterior, with simple anthracite windows and detailing.The glass balustrades of the balconies allow the maximum level of light to enter the apartments, while making the paved courtyard feel even larger and more spacious.Products UsedTerraSmart® Composite in Silver Birch was used across the private balconies. Silver Birch, from the Signature Range of premium ‘capped’ decking, has an elegant textured wood-grain finish.The terrace spaces had additional height build-up requirements, so fixed-head adjustable pedestals were used to raise the decking to the door thresholds.

Constructed within the Mossley Hill Conservation Area, the parkland surrounding the University of Liverpool's Greenbank student residences was gifted to the university by the Rathbone family in 1939, and still offers a unique environment today. Crucially the designs for new buildings, including use of Technal's aluminium building systems respond sympathetically to the verdant setting. The Greenbank Residences replace outdated buildings and have been arranged around three landscaped courtyards, rising from five to eight storeys in height, creating over 1,370 new en-suite bedrooms. This project utilised 2,000 m2 of aluminium curtain walling, windows and doors - all of which offer high thermal performance and are finished in matt Anthracite Grey polyester powder coat.