"synthetic anhydrite calcium sulfate based flooring"

The new Vista apartments occupy an enviable location, close to Chelsea Bridge and overlooking Battersea Park. As a high-end residential project, the landscaping was given a high priority.Lang+Fulton were approached by the architects to propose a suitable stainless steel grating for pedestrian use, which would ventilate the underground car park. A grating with a heel proof mesh of 55x11mm was recommended and was designed with support beams and anchor bolts. The stainless steel was pickled and polished. In addition, 31m2 of galvanized mild steel grating with 66x33mm mesh was supplied for an area which was inaccessible to the public.

Award Winning postmodern styling was achieved with a mix of ARDEX products, including PANDOMO®, helping to make the Scottish Parliament one of the most innovative architectural designs in the UK. Products used: ARDEX P 4, ARDEX P 51, PANDOMO® Wall

350m2 of the entrance foyer and retail area was levelled and smoothed over 3  nights, allowing the cinema to remain fully operational.

Residing alongside the River Thames in Reading is the site of the King’s Meadow swimming pool. It originally opened in 1902 as the Ladies Swimming Baths and is the oldest outdoor public pool from the early Edwardian era in existence. However, over time it fell into a state of disrepair and, following its closure in 1974, has been left unused for over 40 years.

Car park refurbishment for Dublin City UniversityMcKeon Construction Limited, were looking for a durable and innovative resin waterproofing system for one of their clients, Dublin City University (DCU). The university required car park refurbishment to a multi-storey car park where the existing deck coating had started to fail.McKeon discussed the client requirements with Larsen Contracts (Ireland) Ltd, a specialist resin contractor. Larsen recommended the Degafloor Top Deck System for the car park refurbishment.The Degafloor Car Park Top Deck System is designed to offer the outstanding flexibility and performance required for top decks of multi-storey car parks. The unique formulation allows installation to occur extremely quickly, with the main system of 23mm being installed in a single application process.The project was completed according to specification, within budget and on time. DCU and McKeon Construction Ltd are delighted with the results and the numerous benefits that the Degafloor Top Deck System has delivered, including: outstanding durability, flexibility, a totally seamless and impervious finish, exceptional slip resistance and visually pleasing aesthetics.Eddie O’Brien of Larsen Contracts Ltd commented: “The Degafloor Car Park Top Deck System enabled us to complete the installation within the short window of time available (weather wise). Traditionally, we have been unable to complete car park projects outside of summer months due to weather and temperature constraints, but this new system has made it possible for us to complete car park installations all year round.”

Client: EncircLocation: Chester, UKYear: 2023Project size: 450 m²Vebro systems: vebroscreed Industrial, vebroflex Decorative UV Plus, vebroflex Comfort UVAs part of its goal to decarbonise by 2025 by using hydrogen in its furnaces, a Chester, UK glass manufacturer has recently undergone an expansion, requiring durable, attractive flooring throughout.Encirc is a leading UK manufacturer of glass containers. Founded in 1998, the company has since grown to become one of the largest and most advanced manufacturers of its kind in Europe.Part of the Vidrala Group, Encirc is based across three sites in Northern Ireland, Italy and Chester, UK. Each year they produce more than 4 billion glass containers for leading global brands, filling many of them for retail across the UK and Europe.As part of the upgrade to the Chester facility, an extension was added that required a new flooring solution to help join the old and new areas of the facility seamlessly.A durable, practical and aesthetically pleasing floor coating solution was required to meet the needs of this modern production facility.Vebro Polymers supplied a package of polyurethane flooring materials as well as a heavy-duty industrial screed for substrate levelling.vebroscreed Industrial, applied at a nominal 10.0 mm across the 450 m2 floor area, is a deep-fill, rapid-setting and hardening, high strength, single-part, cementitious smoothing underlayment screed, that provides a durable sub-floor prior to the installation of resin finishes.vebroflex Decorative UV Plus in Charcoal Grey was chosen for the main area and entrance walkway, and vebroflex Comfort UV in RAL 7037 Dusty Grey was applied in the staff changing area and locker rooms.Both are polyurethane comfort systems, also known as liquid vinyl, are made up from multiple layers of flexible polyurethane resin installed onto a primed substrate or rubber underlay to provide a cushioned effect underfoot.Not only for these systems boast high performance, they also help to enhance the working environment. vebroflex Decorative UV Plus includes tiny polymer beads for a subtle yet attractive finish, while vebroflex Comfort UV features a soft matte finish for a contemporary aesthetic.Quest Industrial Flooring offers a wide range of industrial flooring solutions to suit the huge variety of service conditions required by the demanding industrial industry.Based in Warrington, Cheshire, the team at Quest deliver screeds, high build epoxy coatings and line-marking as well as polishing and grinding of terrazzo and polished concrete flooring.The company’s vast experience in the industrial flooring sector means they are able to offer customers expert advice on the concrete and resin flooring options available, as well as consistently install high quality floor systems on time and on budget.Their attention to detail combined with their aim to provide unrivalled customer service, means customers are supported through their projects from specification through to installation and beyond.

Client: Canary Wharf Group Consultant: Adamson Associates Architects Main Contractor: Kilnbridge Construction Ltd Main Products Used: Emseal DFR-2 SystemsWood Wharf Development is certified as a BREEAM Outstanding rated, sustainable mixed-use development that covers a 23-acre site. It consists of 6 individually designed building structures that provide 2 million square feet of curated workspaces and offices, more than 3,500 new residential homes and 500,000 square feet of retail space. The site is being developed as a new 5G and Wi-Fi-6 enabled, London District to include more than 9 acres of interconnected riverside leisure space with boardwalks, squares, and parks to create an oasis of urban green space. The new multistory building structures were designed with 50mm wide structural expansion joints between floor slabs to accommodate the high levels of thermal movement anticipated, as well as the vibrations from traffic and other loadings. These joints also had to minimise any noise transmission through the floors and provide a minimum of 2-hours fire resistance, which is a key reason the consultants selected the Emshield DFR-2 System as it could easily meet all these stringent requirements. In fact the innovative Emshield DFR-2 System can accommodate more than 100% joint movement capability and is CE Marked to EN-1366-4 for up to 4 hrs fire resistance. This unique Emseal solution also has the advantages of not requiring any potentially damaging mechanical fixings into the structure, as it is easily bonded into the joint, with access only required from above. 

This global cybersecurity company's large desk-based workforce required comfortable, hard-wearing floor coverings to zone and manage the acoustics for their new office space.The design team specified Compound Magic (carpet) and Earth Science (LVT) from Milliken's Change Agent collection alongside Major Frequency's Distortion design in netural taupes and rich browns to stunning effect. Angled Walk from the Clerkenwell collection contrasts to identify the various meeting spaces in this dynamic workspace.

Stopgap 600 Base deep section base compound and Styccobond F49 Hybrid PS adhesive were amongst products from F. Ball used to install floorcoverings in the new premises of the Echt franchise of the Dutch home deco retailer Decorette.Work was undertaken by Decorette Woonatelier Schuyt in Vught, as part of an arrangement that will in turn see Decorette Woonatelier Echt install floorcoverings at the Vught location when it is refurbished later in the year.After installers began by removing old ceramic tiles and mechanically preparing the subfloor to remove adhesive residues, floor levels needed to be raised by 11mm.To do this, flooring contractors applied Stopgap 600 Base deep section compound at a thickness of 7mm. The product is suitable for applications at thicknesses between 5–50mm prior to being capped with a suitable F. Ball smoothing compound. Its fast-drying properties meant that this could take place just three hours later, allowing flooring contractors to return the next day to install floorcoverings.Pressure sensitive adhesives from F. Ball were then used to install PVC planks in a herringbone formation in the 200m2 area. Floorcoverings were adhered using Styccobond F49 Hybrid PS temperature tolerant adhesive in the areas near the showroom’s floor-to-ceiling windows, which had the potential to cause solar gain and, consequently, extreme temperatures and temperature fluctuations – this can cause floorcoverings to expand and contract significantly, leading to unsightly tenting and gapping at the edge of vinyl floorcoverings over time. Styccobond F46 was used to install vinyl planks in other areas. The pressure sensitive acrylic adhesive provides a high bond strength that increases as it is trafficked, as well as strong initial tack, to reduce the likelihood of tiles or planks moving around while working.Raymond Schuijt, franchise owner and installer at Decorette Schuyt, said: “We love using F. Ball adhesives and smoothing underlayments as they are top quality and very easy to work with. The range is well thought out and contains solutions for every situation you can imagine. I can always count on their technical support if I have any queries too. They’re only ever a phone call away and will gladly undertake site assessments to advise on the required subfloor preparation and floorcovering installation processes.”

Admirals Quay is a business centre in Southampton which created a thriving backdrop for emerging leisure, residential and commercial exchange. This 21,000m² Ocean Village development includes a 26-storey residential tower featuring 300 apartments, the tallest residential building in the area, which will act as a spectacular landmark. The result is three mixed-use towers, unified by commercial units at the base.Cellecta HiDECK Overlay 18 was specified by HGP Architects in this project as the overlay flooring solution. It’s ideal for flooring applications incorporating an underflooring heating system due to its high thermal conductivity, which provides rapid reaction times, saving on running costs. In addition, its high density makes it perfect for various acoustic applications.Warings were awarded the contract to construct this prestigious, connected, and invigorated waterfront on the mouth of the river Itchn.

Designed by Zaha Hadid Architects, the new landmark Antwerp Port House comprises of a new highly architectural four-storey extension positioned above a restored former fire station. Providing 12,800m2 of office space, the project has given the Port Authority a single headquarters building for the first time.ComFlor® was the preferred flooring option out of five put forward, based on its light weight and cost. The system also provides the required strength, could achieve the required load and span requirements and offered a fast build time.5,000m2 of ComFlor® 80 in 0.90mm gauge, as well as a quantity of ComFlor® 60 in a 1.20mm gauge for the sloped stairs, was used to deliver the flooring solution, all supplied by Dutch Engineering.

Re-designed by Schmidt Hammer Lassen Architects, Metalskolen conference centre on North Zealand, Denmark, has undergone a complete transformation. The new, contemporary interior features a total of 2,300m2 15mm Oak Classic plank flooring, fitted throughout circulation and breakout areas as well as in all conference rooms. Delivered unfinished, the solid oak flooring was finished on-site using Junckers’ Rustic Oil in White to create a pale floor which reflects a lot of natural light. True to architectural traditions commonly applied in the Nordic countries, SHL has created an inclusive and nurturing space, providing the perfect setting for learning, reflection and relationship building. Not only concerned with light and aesthetics, SHL base their work on democracy, welfare, sustainability and social responsibility, a commitment which results in buildings with a high degree of wellbeing. A light-coloured floor helps enhance lighting levels, reducing the need for artificial light and therefore saves energy. In contrast to a dark surface, which absorbs and holds heat and subsequently releases it back into the room, a pale floor will not contribute to overheating, reducing the need for air conditioning systems. With a perfectly smooth surface, a solid wood floor from Junckers cannot harbour dust or mites. As an all-natural material, wood contributes to an even and balanced indoor climate as it helps maintain temperature in a room and reduces static from any electrical equipment. Junckers’ floors hold the Danish Indoor Climate label and have undergone extensive degassing and odour testing to ensure there are no chemical substances in the flooring. Junckers also complies with EU legislation REACH. 

Marshalls were approached by London based Architects ACME in early 2015 to discuss the supply of multiple shades of grey granite for Victoria Gate’s original flooring plan. Following a series of meetings and discussions, Marshalls were able to achieve the vision of the project designer, providing a blend of 13 precision-cut granites all complying with the relevant performance criteria, and delivered by Marshalls’ managed supply chain. The scheme was ultimately delivered over a period of 5 months including 3000m2 of polished granites and specialist bespoke granite staircase features.

A Suffolk-based local authority turned to Crown Paints Specification Services to transform the tallest building in the most easterly settlement of the UK. St. Peter’s Court – in the coastal town of Lowestoft, Suffolk – was in need of re-decoration and Waveney District Council wanted a product that would last for the long-term. Crown Paints came out to the site, which comprises of 90 flats over 15 floors, and after an extensive inspection and review of requirements, specified 3,600 litres of Sandtex Trade 365 All Weather Masonry Paint for the project.

At the beginning of 2016, they started a major refurbishment of their head office. With around 700 employees, they were facing an issue how to meet the demand for hot and chilled filtered water across the three floors. A cause of staff frustration can be the inability to get a drink when they want it, and through the unique energy efficiency technology, the Billi Quadra range provides the solution. Following discussions and a site visit, based on the Billi recommendation, mothercare selected the very popular Quadra 460XL boiling and chilled system in chrome with matching drainage font.

Products donated by F. Ball and Co. Ltd. have been used as part of ‘The Secret Garden’, a charitable restoration project at Glenfield Hospital. Work commenced with the removal of carpet tiles and a small area of vinyl tiles, in addition to flattening of a high point. After ensuring that the subfloor was sufficiently sound, dry and free of contamination, Stopgap 1200 Pro was applied to the floor at a thickness of 3mm to create a base for new floorcoverings. Finally, vinyl sheet was installed, with joints welded and a silicone sealant used to affix the floorcovering to skirting boards.

Premier Security & Fire Consultants has joined forces with leading forensic security company DNA-Detect to create a market-first, integrated high-security door system armed with a Forensic DNA traceable, marking fluid.Our design team has worked with DNA-Detect to incorporate an automatic spraying system into our LPS1175 SR2 (B3), SR3 (C5) and SR4 (D10) and our upcoming SR5 (E10) security door designs tested and passed by the BRE (Building Research Establishment), the UK’s No.1 testing house.If attacked, the DNA based security system will automatically dispense a covert spray concealed within the door frame. The perpetrator will be forensically marked linking them to a crime scene providing irrefutable evidence to prosecuting authorities.Each DNA-Detect Forensic Perpetrator Marking system contains a unique, registered Bio-synthetic DNA Code. The UV Marker in DNA-Detect’s products is Orange, to avoid any confusion with other products which may offer different colour UV MarkersOnce in the police custody suite, the police will check a suspect for the UV marker and will then proceed through the police process to take swabs from the marked area for submission to DNA-Detect’s forensic Labs for DNA extraction using a process known as Polymerase Chain Reaction (PCR)If the sequenced code recovered from the perpetrator’s skin and clothing matches the code from the registered door device, which can be securely verified at the ISR (International Security Register) then this will provide prosecutors with irrefutable evidence pinpointing the perpetrator to the crime scene.Premier Security & Fire Managing Director Neil Johns welcomed the collaboration with DNA-Detect. “Breaking new ground with unique designs and ideas is very much in Premier’s own DNA. The combination of Premier’s certificated door systems and the DNA-Detect trace system certainly brings an exciting, new element to the security market.”Those words were echoed by Chris Taylor – Chief Technical Officer at DNADetect. He said: “We are delighted to be partnering with Premier in this important industry-first initiative. Integrating Forensic DNA Spray Technology within Premier high-grade security doors will provide the ultimate deterrent to violent attacks within both private and business premises. This will ensure our client’s safety, protection and business continuity.”Premier Security & Fire Consultants is the UK’s leading supplier of Secured by Design LPS1175 door systems with more than 2000 designs and options including SR2; SR3; SR4, fire-resistant and thermally brokenTechnical Overview:An integrated compact modular DNA based Forensic Security System can be completely concealed within, for example, a door frame or above any entry point.The unique DNA and UV mark will forensically link an offender to a crime scene providing irrefutable evidence to prosecuting authoritiesWhen installed above or within an entry point or a door, the system will activate when the door is attacked. The perpetrator will be Forensically marked with a DNA based Forensic Marker and Orange UV fluorophore, dispensed as a covert spray from within the door frame or over the entry point.The unique DNA code within each door frame installation is backed up and registered on an LPS1224a secure database managed by the International Security Register (ISR)The Forensic DNA component within DNADetect’s system is widely tested and proven in court as a highly effective deterrent to criminal activity.​Unique DNA markers provide irrefutable evidence linking an offender to a crime sceneEach DNADetect Forensic Perpetrator Marking system contains a unique Bio-synthetic DNA Code which is registered to the trained security professional.When called to the scene of an incident where a DNADetect product or system has been activated, the police may use their standard-issue 365nM UV torch to look for a UV Marker on the perpetrator.The UV Marker in DNADetect’s products is Orange, to avoid any confusion with other products which may offer different colour UV MarkersOnce in the police custody suite, the police will then check the perpetrator again for the UV marker and will then proceed through the police process to take swabs from the marked area for submission to DNADetect’s forensic Labs for DNA extraction using a process known as Polymerase Chain Reaction (PCR)If the sequenced code recovered from the perpetrator’s skin and clothing matches the code from the registered canister (which can be securely verified at the ISR (International Security Register) then this will provide the Police and Prosecuting Authorities (CPS) with irrefutable proof that the perpetrator was at the crime sceneKey Features of DNA Detect’s DNA Forensic Marking Systems:Forensically Robust – DNA Markers have been proven in court to irrefutably link the suspect offender to the offenceIntrinsically Safe – All materials used within DNADetect Jet are safe having undergone extensive Toxicology testingEnd to End Secure – Every DNADetect Jet Device is registered to a trained security professional on an LPS 1224 Secure Database.Accredited Training Programme – DNADetect can only be used by Security Personnel that have undergone an accredited training programme delivered through DNADetect’s ‘Trusted Trainer’ network. This negates misuse ensuring that if and when deployed, the authorities can have confidence that the DNADetect was deployed as a last resort and inline with legal guidelines (within Common Law and Criminal Law – both of which are covered in the training programme)For further information about DNADetect, please contact:Chris Taylor – 07824099907Clive Lloyd – 07730370381Website: dna-detect.com 

This work at Holborn’s Chancery House  — The Office Group’s largest location to date spanning 127,000 sq ft — focused on a design that accommodates multiple working zones and breakout spaces, enhances wellbeing and offers an abundance of natural light.Radii’s design department provided multiple bespoke solutions for this fit out, working on four of the building’s nine floors.For glazed fronts, our elegant Parallel 50 (Rw 45 dB) double glazed partitions in emulated satin stainless steel finish — a reference to the historic London Silver Vaults that are located at the base of Chancery House — were utilised along with wraparound framing and a custom blade detail to create an eye-catching visual effect.On the Ground floor, single glazed Linear 59 partitions (Rw 39 dB) with a bespoke pocket sliding door into drywall was installed for platform lift access.Finally, E30 fire rated double doors were placed on the Lower Ground Floor to provide fire route protection.

An Orkney based seafood processing facility required durable, slip resistant floor coating systems for its production environments.Cooke Aquaculture Scotland is one of the leading producers of Scottish salmon, headquartered in Glasgow, with seawater farming operations in both Orkney and Shetland, and supplying national supermarket chains including Waitrose, Marks & Spencer and Tesco. Not only does the company pride itself on being the largest producer of organic Scottish salmon, Cooke Aquaculture has also established its own in-house feed division, ensuring their salmon are thriving, as well as ensuring their operations are sustainable from sea to delivery.While the strong tidal waters around the islands — the most northerly part of the UK — make for an ideal salmon farming location, transporting goods for the transformation of Cooke Aquaculture’s processing facility proved challenging. In spite of this, the installation team were able to complete the project, installing vebrocrete HF and vebrospeed Quartz over two phases across two areas of the production facility.With the production facility being subject to lots of water, both from the production processes, as well as the cleaning regimes, a suitably resistant and anti-slip finish was required to promote both safety and hygiene. vebrocrete HF, Vebro Polymers’ high performance seamless PU concrete, was chosen in Blue for the first large production area.  The system, which demonstrates excellent resistance to the effects of low temperatures, as well as hot water washdowns and associated thermal shock. The positively textured, seamless and hygienic floor coating is ideally suited to areas where a balance between intensive cleaning and slip resistance is required. For the second phase in another production area, vebrospeed Quartz was chosen to transform the floor under a fast turnaround. The attractive yet functional slip-resistant floor coating system based on fast-cure MMA (methyl methacrylate) technology, cures in as little as 60 minutes, meaning production can be back up and running very quickly. 

The new Faculty of Arts building at University of Warwick designed by Feilden Clegg Bradley Studios brings the departments of the Arts and Humanities faculties under a single roof for the first time. The light-filled, timber-lined space is formed around and imposing internal staircase clad in Junckers’ solid ash flooring.The stair rises from a base of amphitheatre seating andrises through the building connecting teaching, social learning, public exhibition, and departmental spaces throughout which all branch off the central staircase. Entirely clad in Junckers’ solid ash, the central stair forms the main route through the building’s open, inviting, and flexible spaces. “The stair provides a space for daily informal meeting as well as a place for events and occasions such as documentary filming, graduation photographs and whole faculty celebrations. The use of natural timber, combined with natural light brings a warmth and a sense of timelessness to the space.”David Harris, Associate, Feilden Clegg Bradley StudiosJunckers’ solid ash has excellent strength properties and makes a hard-wearing, long-lasting floor. Often used in contemporary interiors, ash flooring adds natural warmth and character which can provide a good balance to clean lines and hard surfaces. The unique grain structure of ash makes it a characterful floor, similar in pattern to oak but with its own distinct colour tones. With its capacity to reflect an abundance of natural light, it is an ideal flooring choice for the project.The flooring contractor was Capital Floors Ltd. 

F. Ball’s Stopgap Fill and Prime thixotropic primer and Stopgap 1200 Pro levelling compound have delivered a fast-track solution for installing floorcoverings in one of the largest small-animal referral hospitals in Europe.Flooring contractors installed vinyl safety flooring and luxury vinyl tiles throughout a total area of 1100m2 at Southfields Veterinary Centre, in Basildon, Essex.Requiring a timesaving solution for working over chipboard as an alternative to overboarding with plywood, the contractors contacted their regional F. Ball technical representative, who advised preparing subfloors with Stopgap Fill and Prime prior to the application of a suitable levelling compound.Stopgap Fill and Prime is a cement-based primer that is designed for use over raised-access panels and flooring grades of plywood, chipboard, MDF and oriented strand board (OSB 3). It has a thixotropic consistency, meaning that it flows freely when stirred but sets to a gel-like consistency on standing, enabling it to fill gaps between panels to prevent imperfections transferring to the finished installation.Stopgap 1200 Pro levelling compound was then applied in all areas to create a perfectly smooth base for floorcoverings. The product is fast-setting and fast-drying and can also be applied over old adhesive residues, in which case there is no need to prime subfloors beforehand.Polyflor vinyl safety flooring was installed in the treatment rooms using Styccobond F44 solvent-free acrylic emulsion adhesive, which is designed to give a strong initial tack, high bond strength and a long open time.In the canteen, Forbo Allura Flex Wood luxury vinyl tiles were adhered using Styccobond F46 pressure sensitive adhesive, which provides instant grab, preventing floorcoverings from sliding as tiles or planks are subsequently placed. The adhesive is designed to minimise the incidence of trowel serrations showing through thin vinyl flooring and potentially affecting the finished appearance of the installation. Styccobond F46 was also used to secure Polyflor vinyl safety flooring in the corridors connecting the treatment rooms.Capping and coving were installed in the corridors using Styccobond F60 contact adhesive. The formation of an instant bond makes it suitable for securing floor and wallcoverings on vertical surfaces.Commenting on the project, Ben Montgomery, head of projects at Veatu Flooring, said: “While we use a lot of F. Ball products and they’re our first choice because of their quality and availability, it’s the first time we’ve used the tech rep service. They came out and provided a tailored specification for the project we were working on, which ended up saving us a lot of time and expense.”Before any floor preparation work was carried out a moisture test was conducted, which determined that subfloor moisture levels were low enough that a moisture management solution was not needed.

The key to this unique spacial experience was choosing the right materials for the finish. PanDOMO® offered a monolithic system for a seamless, fully custom-designed surface resulting in a harmonious, flowing space with a clear, reduced design, resulting in an absolutely stunning effect.

St Andrew Holborn has stood as a Catholic Church for over 1000 years. Throughout its history it has received several major renovations, but it is most famously known for its late 17th century rebuild by the renowned architect Christopher Wren, who later went on to design one of London’s most recognisable and historic landmarks, St. Paul’s Cathedral. The latest large-scale works date back to the 1950s, and six decades on it was deemed in need of repair again.

The stunning appearance of the finishing surface produced by the PanDOMO® Wall System integrated with the ambient lighting effect perfectly, whilst complying with the owners quick installation and drying requirements.

As part of the Rochdale Riverside new development, the TVS Group was approached to assist in the construction of a new 6-screen Reel Cinema to ensure that Reel’s acoustic requirements for the space were met, as well as ensuring that adjacent businesses would not be adversely affected.

As part of a major refurbishment of listed parliamentary estate buildings, only ARDEX products were trusted to restore and protect these iconic working areas for years to come. 

Workers were walking over the levelled fl oor just 3 hours after applying the ARDEX A 38 fl oor screed, allowing work to continue and ensuring the store was open in time for the Wimbledon Tennis Championships

With the help of Laurence Llewelyn-Bowen, founder of money.co.uk, Chris Morling has been successful in his mission of creating the ultimate workspace for his Cirencester-based independent comparison website’s headquarters. The grade two listed Victorian castle features a statement herringbone floor design made up of Da Vinci planks in three contrasting oak colourways - American Oak, Fresco Light Oak and Natural Oak - and matching bespoke 36” x 3” white block colour plank and tile combination in the dedicated kitchen and break-out area.

Union Wharf is a two tower residential development in Greenwich, London. A 23-storey Roof garden makes the most of the breath-taking views of the London skyline.Designing and specifying products for a 23-storey high terrace comes with some key issues which must be addressed. One of which, the Terrafina decking overcame due to its easy clip system making it a doddle to install and overcome this problem.Another, was to ensure a solid base for the artificial grass and planters to be fixed to. This was however, something Raaft had planned for and the Floor structure panels was an easy solution to this.

Ogilvy & Mather UK is a global advertising & marketing agency based in London. They offer integrated marketing solutions with a focus on measurable results. For their offices at Sea Containers House, extending over several floors, the project included high quality filtered drinking water systems for staff and visitor refreshment. The highly respected facilities manager Anabas said that they regard the product as very best quality and reliable with an excellent service package as back up. In addition, they said, the Billi engineers are professional, friendly and carried out the installation and commissioning efficiently and on time.

Working across more than thirty countries in Europe, Bisset Adams is an award-winning architecture and design practice with its central hub based in the UK. To accommodate for the growing team of architects, interior designers, project managers and brand specialists, earlier this year the London headquarters underwent a full refurbishment. As experts in the field, the Bisset Adams team managed the project themselves, and turned to Tarkett and DESSO to supply the flooring, as they wanted to create a vibrant, yet functional design that would provide natural movement between different areas and outline distinct zones.

The Farrat CineRANGE provided optimal acoustic isolation for the Ealing Picturehouse, a newly built 8-screen cinema with a café, bar, and kiosk in one of London’s most iconic film locations, a local landmark with a rich history.Farrat designed and supplied several products including; CineWALL PRO partition base track isolation, CineTIMBER LITE isolation strips, for lightweight stadia seating isolation, and CineFLOOR LITE acoustic floating floors specifically engineered for auditoriums which were also fully installed, and quality assured by our expert site team.

Nearly forty years after the lights were switched off at Battersea Power Station, a decommissioned Grade II listed coal-fired power station, located on the south bank of the River Thames, this much loved London landmark recently re-opened to the public following a transformational eight-year restorationApple Inc. will be leasing approximately 500,000 sq ft. across 6 floors of the central Boiler House and plans to move all of its 1,400 London employees to the new venue. This will make Apple by far the largest tenant at Battersea Power Station.221m² of Stravifloor Channel, a resilient high-performance floating floor based on floor channels containing steel springs as resilient supports was installed to decouple the acoustically critical listening, screening and control room spaces at Battersea Power Station.The added insulation material between the channels contributes to the acoustic optimization of the spaces by preventing the so-called standing wave effect to take place within the air void.During the installation of the acoustic floating floor, careful attention was paid to the many service penetrations as improper installation would most certainly lead to rigid connection which in turn affect the system’s performance.

Based at Manchester’s waterfront in Salford Quays, MediaCityUK Studio Block is the largest media development in the UK and will become centre for the world’s leading creative and digital businesses. The BBC is one of mediacity:uk’s anchor tenants and from 2011 it will be home to five BBC departments including two TV channels and two radio stations; three of them are Radio Five Live, BBC Sport and CBeebies.Many of the studios in the main Studio Block have Stravifloor Jackup jack-up concrete slabs to optimise the sound insulation between noise producing and noise sensitive spaces. These floating floors in combination with the structure of the studios being isolated off Stravibase SEB simple elastomer bearings delivering high performance box-in-box constructions.The TV studios built off the upper floors were built using a heavily damped concrete construction supported at 600mm centres using Stravifloor Deck isolation rails. In these studios the structure of the studios was built off the floating floors to create the box-in-box whilst providing very stable conditions for the TV cameras.

The Scope of the project was to provide a structural waterproofing solution to a private dwelling with new build extension.The property, situated on a sloping site gave the opportunity for the waterproof design to utilise the properties environment to allow for natural discharge of any potential water ingress.The property was detached and retaining to the front and side elevations where the retaining ground slopes down and away from the property to a garden that continues to slope down to a small stream. The retaining walls on either elevation rise at their highest point to approximately 1500mm above the internal floor level.The internal walls of the property were original brick to the front and new cavity built concrete block. The floor to what was the original house is of solid concrete construction joining on to a newer block and beam floor construction.When designing the most appropriate waterproofing system to any given situation, various design factors require addressing such as (but not limited to), final use of the building, the grade of waterproofing requirement under the British Standard, structural considerations based on the form of construction and in some cases, satisfying the requirements of building warranty providers.

Valentines house, an 11,000m2 building in Ilford. Originally a commercial office block, it’s position adjacent to both Crossrail and TFL red routes meant it was a prime candidate for conversion to desirable one and two bedroom apartments.The refurbishment works consisted of extending 4 stories including structural strengthening and new envelope to incorporate full fit-out of 122 residential units and 3 retail areas.As part of the conversion, main contractor John Paul Construction, required the expert installation of around 10,000 m2 of acoustic flooring to achieve Approved Document E Building regulations. As part of the acoustic flooring package, Soundis value engineering option of Soundis 10mm Acoustic Cradles, Base Pads, Riser Stackers and 18mm P5 T&G chipboard was selected. Our Cradle and Risers are manufactured from 100% recycled materials assisting to the sustainability targets of projects. An acoustic cradle and batten system was chosen, to level out floor imperfections and to minimise impact noise from passing footfall. Airborne wasn’t so much of a concern in this build due to the high mass concrete subfloor.