"steel and aluminium frames"

Loft Hatch with Youngman Loft Ladder ** We can make any size Loft Hatch ** Our Loft Hatch is supplied with a Youngman Telescopic Loft Ladder which is already fitted to the rear of the Loft Access frame for easy installation. Suitable for ceilings where regular access to loft space is required. The panel is fitted with a Loft Ladder No of Treads: 9 Floor to Hatch Height: 2170mm to 2610mm Load Capacity: 150kg (23.6st) Material: Anodised aluminium Foot Material: Plastic Opening: Automatic locking and release Certifications: Tested in accordance with EN 14975 Loft Hatch with Ladder

Howe Green’s 5000 Series access covers were chosen by interior specialists, Tekne Shopfitting Limited to provide access in The Tramshed, a Grade II listed building in London. The aluminium access covers were selected to provide a reliable route to essential underfloor building services in the Tramshed’s public washrooms and busy kitchens. Ensuring an excellent aesthetic finish, Tekne fitted four covers and inlaid each frame with resin flooring to match the surrounding area. The covers were double-sealed for use over foul drainage, with a third seal fitted to help prevent the ingress of dirt.

The regeneration of Swansea’s old docklands has seen old, dilapidated warehouses transformed into exciting mixed-use projects. Residential, commercial, as well as valuable retail space now occupy the area, collectively known as ‘The Urban Village’. Construction of the new-build 9-storey residential apartment block by the main contractor R&M Williams, saw RCM engaged as an important supplier. As well as providing the essential aluminium support frame, RCM also ensured timely delivery of the colourful Swisspearl façade. Each panel was fabricated by RCM to exact specified size, saving precious time on the construction of the building.

So here we have a stunning steel framed barn conversion stripped down and retrofit with a huge hybrid timber frame panel system manufactured and installed by White Haus Bespoke Timber Frame. These panels are made up of 140mm insulated timber frame, 9mm OSB sheathing with Passive Purple External and two 50mm cross battens externally, followed by feathered edge cladding. With the internal side then adding an additional 50mm PIR insulation flowing into the joist zones with one continuous layer of Passive Purple and 25mm counter battens for services. This 326mm wall build up has used both Passive Purple and Passive Purple External which meet in the window formers to guarantee the build its internal airtight vapour control and external weatherproof breather membrane. The Joints in the OSB, PIR insulation and fixings into the timber frame studwork were all prepped like always using the BRUSH versions of both Passive Purple and Passive Purple External. This fibre reinforced product allows for a tough hold and elongation on any shrinkage the insulation or timber may have with building settlement or extreme changes in climate. With only a score of 2.5ach required, Intelligent Membranes have given this wonderfully unique home the full treatment for perfect performance to keep the HVAC system running on low hassle percentage and optimal performance output.

Durable and decorative lift reveals, manufactured from stainless steel, aluminium and laminated plywood, provide a practical and aesthetic enhancement to lift installation and refurbishment projects, as well as lift lobby upgrades.Every lift reveal is designed and manufactured by us to meet the exact specifications of each individual project with great attention to the detail, fit and finish of every component.All linings are manufactured to comply with the relevant safety legislation, incorporating safe edges and corner radius detail.

The award-winning and BREEAM Outstanding Engineering Building at the internationally renowned Lancaster University features a complete range of architectural aluminium glazing systems from Technal. Located on the Lancaster University campus in the North West of England, the new engineering facility was awarded Winner of the RIBA National Award for 2015 and was highly commended by the Royal Institution of Chartered Surveyors in the Design through Innovation category at the 2016 RICS North West Awards. Purpose-built to a world-class standard, the scheme comprises of 4,701 sqm of workshop, laboratory and office space in two concrete framed blocks either side of a dramatic four-storey atrium. Using passive techniques to achieve the environmental performance measure of BREEAM 'outstanding' in the design assessment, which is in-line with Lancaster University's sustainability and carbon reduction targets. With this in mind, aluminium doors and curtain walling were chosen for this project. The Facade is featured throughout the building, and was specified for its contemporary aesthetics. The system also includes concealed vents to allow natural ventilation without compromising the architectural integrity of the facade. With natural light being a key part of the specification, Technal aluminium curtain walling allowed larger and heavier glazing units to be installed thanks to its superior load distribution, permitting more natural light to flow through the building's rooms.

Project OverviewClient: Mather & SmithFinish: Powdertech Anomatch™A prestigious residential block in London’s Knightsbridge was designed to feature stripes, or ‘fins’, of beautiful anodised aluminium running vertically up the building. The metallic sheen of these vertical fins would form a continual line giving a stylish and contrasting definition to the pale red brick of the exterior. The window sills would also be anodised aluminium.The ProblemThe aluminium fins are 4m in length and intended to be seamlessly joined after anodising to provide the effect of one continuous metallic stripe. It quickly became apparent that the anodising process was not able to provide a consistent shade on the metal. Every strip was a slightly different colour and once erected on the building the patchwork effect was untidy and unsatisfactory. The smallest inconsistencies in shade, within an area intended to be homogenous, will mar an intended visual effect.The SolutionPowdertech Anomatch™ achieves a similar appearance as anodising, enhancing the metal with a soft sheen. Furthermore, it provides excellent colour stability and consistency between batches, regardless of the origin of the metal, and negates any differences in base material grain. Powdertech Corby became involved in the project when the developer had aluminium fins and window sills in different stages of preparation, many already anodised, some part-finished and others unprepared. Powdertech Corby collected all of the aluminium in its various states and chemically stripped the anodised fins back to base metal, before processing and coating 500 square metres of aluminium in Anomatch™ 547.Despite the varying states of the aluminium on arrival at Powdertech, Anomatch™ gave a consistent colour to every piece, thus meeting the design brief for the vertical fins, window cills and copings uniformly throughout the development.Benefits of using AnomatchConsistent colour shade between batchesExcellent resistance against corrosion.Cost savings as lower grade aluminium can be used, rather than the high grade needed for anodising.Faster turnaround than anodising.Sections can be drilled or cut without fracturing the coating.Steel can be coated with Anomatch™

The design of the house specified an airtight and thermal efficient solution to meet Building Regulations. The brief for DGTS was to provide a highly insulated (U-Values for walls/0.11 and floors/0.13) envelope to the main steel frame structure and concrete beam and block floors to both ground and first floor level. The dwelling floor area was approx 700m² broken up into twelve rooms including a wet room, gym, media room and library.

Balfour Beatty approached Planet Partitioning with a high-performance refurbishment specification for the UK's largest private hospital. For all the patient and treatment rooms, Planet Partitioning used p20 demountable glass partitioning with Eclipse sliding doors. FireStop partitioning ensured that lift lobby partitioning has a fire integrity and insulation rating of EI120/120. Doors for the lift lobby are fire rated for EI 60/60 and steel framed.

The new office development for the New Gorbals Housing Association in Glasgow features a variety of aluminium fenestration solutions. Together these have helped create a light and airy workspace and an impressive centrepiece for the wider regeneration of the area.Located on Crown Street, the new commercial office building is complemented by a new civic piazza and has been designed by Page & Park Architects. Flexibility and adaptability were key focuses for the overall design, with the incorporation of daylighting and natural ventilation strategies to boost wellbeing, and large glazed facades to better connect the building with the local community.The welcoming main entrance has been created using Senior’s slimline and thermally-enhanced SF52 aluminium curtain wall system and SPW501 aluminium commercial doors. The fenestration package also includes Senior’s SPW600e aluminium windows which were used throughout. The ground floor glazing has been recessed to provide privacy to the internal work spaces whilst complementing the overall ‘open’ design of the scheme. In contrast, the first-floor glazing protrudes slightly to maximise views of the surrounding city. Senior’s products were fabricated and installed by Scottech for main contractor CCG.The office environment includes both large areas for group work and smaller, more private booths and is centred around a large timber-clad atrium. The use of internal and external glazed partitions and windows helps balance the space, providing links with both the other areas of the building and the outside. The fenestration package has also been designed to provide those using the building with multiple aspect views and daylighting, whilst avoiding overheating and glare from the summer sun. To further complement the overall façade design which features dark grey zinc cladding, and to boost the durability of the aluminium frames, the windows, doors and curtain wall systems were powder coated.

Margam Park’s new washrooms needed to be durable, easy to maintain and impress their visitors.Margam Country Park in Wales is owned and administered by Neath Port Talbot County Borough Council. The estate containing a Tudor Gothic Mansion was once owned by the Mansel Talbot family in the 1800s. The 850 acre country park is rich in history, with evidence of over 4,000 years of continuous habitation and use by man. This means it has exceptional historic value, with some of the country’s finest architectural treasures. Paired with its natural beauty, wildlife and many activities and facilities, the Margam Country Park has evolved into a popular attraction which is visited by 350,000 people per year, including locals and tourists alike.Neath Port Talbot Council came to Bushboard Washrooms for the refurbishment of the public washrooms. The main concern for this project was ensuring that the toilets were able to withstand the high traffic the park receives each year. As Alison Lloyd, the Commercial Officer at Margam Country Park, explained “visitors often judge a site on the quality of the loos”, this meant opting for a robust washroom range which offered a modern, high quality finish that will remain presentable at all times.Initially designed for secondary schools with the key focus on privacy, our HiZone for Schools toilet cubicle at standard height was decided as the perfect specification for the country park’s needs. Alison put emphasis on requiring an “indestructible build”, the cubicles pilasters and partitions are fixed to the floor in aluminium channels which creates a strong foundation. The toilet cubicles were manufactured in Solid Grade Laminate which has a compact core making it a highly durable material. It is also impervious to water which makes it easy to clean as the panels do not need to be dried meticulously afterwards to prevent damage.The design of the public washroom was carefully considered. The council wanted to cater for everyone who would visit their park, with additions such as child height basins, family changing areas and enlarged toilet cubicles with grab rails for ambulant/disabled users. In particular, the park recognised parents with their children would regularly visit the park. They designed a superloo style room to utilise space, this was larger than a typical toilet cubicle which gave users more room to manoeuvre within the washroom space.Ease of cleaning was fundamental to the project because of the high traffic the toilet cubicles will endure. Our own brand SanCeram’s Langley WCs and urinals were chosen which both offer a smooth and rimless design to eliminate dirt traps, it also suited the “clean lines” Alison was looking for. Margam Park had sanitaryware and brassware ready plumbed which meant that that it arrived pre-fitted to panels assembled onto a rigid steel frame, this saved both time and money. Being a refurbishment project it meant the washrooms did not have to stay closed to the public for a long period of time.Vanity units were also supplied as Ready Plumbed Modules and designed to hit the parks public washroom brief. Solid Surface Counter Top vanity units are ideal for busy washroom environments as they are easy to maintain. Alison wanted to make sure that the washroom had ‘clean lines to clean’, so integrated inset wash hand basins were supplied which have a flush design leaving no dirt traps for a hygienic hand wash station whilst also creating a seamless, high-end overall look.Alison told us that the colours were “chosen to fit with the Country Park, a wood feel and green panels to make it bold and stand out”. Lime Green and Bleached Oak laminates paired with Apple Solid Surface colours from our standard range complemented the mansion scenes within the washroom perfectly. Overall the review of the new washrooms at Margam Park were “ABSOLUTELY BRILLIANT! We opened in time for the Early May Bank Holiday and feedback from public was great and staff love the clean lines and bright colours.”

The high quality, high security aluminium entrance door from Smart Designer Door Range was being fitted to a property in Cornwall and needed a Pull Handle which was strong enough to operate the door as well as able to withstand the corrosive environment next to the coast.Our BLU HAB2 Inline Round 'T' Bar Pull Handle was perfect for the application, featuring a 1.5mm stainless steel wall thickness and high tensile strength meant it could open and close this heavy door with ease.

What used to be the site of the Cannon Brewery, dating back to the 1670s, and the home of London’s largest brewery, is now a modular arrangement of 198 apartments with a selection of one, two and three bedroom flats and five town houses built around a landscaped courtyard. The project was designed by architects Hamilton Associates and completed in 2022.Literally a stone’s throw from our Studio in Clerkenwell, London, this was a remediation project, where the existing timber was removed and replaced with our BalcaSmart Aluminium system, in order to make sure the building complied with new fire regulations. The rear of the building also features our TerraSmart Pedestal system.Our aluminium decking system is non-combustible, achieves Euroclass A2-s1,d0 to EN 13501-1:2018, is ideal for all steel, bolt-on and cantilever balconies, and most importantly ensures the safety of all residents. This is what futureproofing is all about.

The Flat Glass Skylight allows you to enjoy natural daylight. The skylight will provide you with a clean appearance in the external roof scope, the toughened outer glass pane has a ceramic edge coating giving you an immaculate and stylish finish. The range comes complete a 160mm high vertical insulated PVC kerb/ upstand. The slim aluminium frame has a internal thermal break allowing it to be energy efficient whilst also reducing the risk of internal condensation. The skylight comes complete with fixing screws which once installed are fully concealed beneath a flush cover creating a sleek and tidy external appearance.

record uk has installed 5 STA 20 sliding doors at the front and rear entrances, which are ideally suited to handle the large volume of traffic the hospital receives. These doors have been customised with aluminium frames manufactured in blue polyester powder coat, to complement the look and style of this modern building. There are also 40 DFA 127 swing operators fitted throughout the hospital to enhance new or existing doors quickly and economically. On other entrances/corridors within the hospital where space is limited so excludes the use of sliding doors, record FTA 20 folding doors can be found.

Planet used p100 demountable double-glazed screens for all the classroom frontages and set black laminated timber classroom doors, and for the offices, 30-minuet fire-rated glass doors into our white aluminium slimline door frames. P20 single-glazed demountable partitioning features in the library and sixth form, which includes a gap between each panel of glass, an aesthetic feature to complement the internal atrium glazing. Eclipse sliding doors were used throughout. Planet's Architectural Glass' in-house design team worked with Aedas to make sure the angled atrium glass was in line with the design intent.

Sutton Place in Bexhill-on-Sea features three blocks of flats, privately owned and maintained via a residents committee.All three blocks had flat roofs that had not only succumbed to years of wear and tear, but would be unsuitable if installed today under current regulations anyway.The most suitable solution for all 3 blocks was an addition of a lightweight steel frame to convert them to a pitched roof with a Metrotile system used as the covering

A complete rework of a postmodern office building (60 London Wall), situated in the heart of the City of London. The project aim was to extensively refurbish, reconfigure, reinvent and reposition the building.Due to the addition of a composite metal deck floor extension and additional steel frame for the top floors, Tarmac’s Toplight C lightweight structural concrete was seen as the perfect solution as it could be pumped and ensured a weight loss of 30% whiel maintaining the necessary structural performance.

The Shield is a £18.4m development located on the east side of Newcastle city centre - a regeneration area previously occupied by light industrial buildings, a brick-build office and a warehouse. Comprising of three blocks of student accomodation extending seven storeys at Stoddard Street to the east, this scheme steps down to four storeys at Clarence Street to the west.This building features a refined palette of materials including brick, aluminium and bronze coloured cladding in a range of natural colours to animate the facade. Visible aluminium frame windows punctuate the mass of three blocks and provide a significant aesthetic impact. Installed in a vertical configuration to contrast with the cladding's horizontal lines, side-hung, open-out windows were mostly used with some top-hung, open-out vents - all fitted with exclusive TECHNAL hardware including locking handles and releasable restrictors. Visible Grid Curtain walling is also utilised in this project for its durability and design flexibility. Featured to enhance daylighting in communal spaces, it was installed at ground level alongside aluminium doors, and at height alongside the windows - adding interest by visually zig-zagging on alternate floors.Within walking distance of Northumbria University's City Campus East, and the main Newcastle University Campus, The Shield offers a mix of self-contained studio flats and en-suite bedrooms with shared kitchens and houses up to 400 students.

The Canaletto residential tower at 257 City Road in London is located halfway between Old Street and Angel Stations in Islington, alongside the regenerated City Road Basin. It comprises a 31-storey tower with 190 luxury one, two and three bedroom apartments built to the standards of Code 4 Sustainable Homes Level 4.The tower is concrete frame and has a curving facade of metal and glass that breaks the volume into a series of three-to-four storey clusters. In turn, each cluster contains grouped balcony terraces, which are a striking feature of the building. The balconies are of steel construction connected to the concrete frame and as always with cantilever construction elements of this nature, one of the early design considerations had to be the prevention of thermal bridging.For the high specification Canaletto project the Schöck Isokorb® T type SK offers the ideal solution. It is a concrete-to-steel connectivity module that sits between the outer and inner structural connection points and blocks the outflow of heat through the use of high quality polystyrene insulation foam. The Isokorb® T type SK provides a clean and unobtrusive connection detail, minimises on-site assembly time and enables a high level of prefabrication.

Cambridge Biomedical Campus. (CBC) created a vibrant and groundbreaking health care community at the forefront of science and medicine.Dortek’s brief was to supply and installation of doors to a very specific programme, across primarily 3 floors.Our Dortek doors were installed within the BRF rooms, laboratories, holding room, procedure rooms, CL3 labs, equipment store, changing rooms, and circulation routes. The type of doors we installed were GRP hinged and sliding in stainless steel frames, many with integrated privacy panels.SolutionThe particular project requirements that made our doors suitable was the durability, acoustic performance, non organic door quality of our SS frame which ensures suitability to this environment. The SS frame had previously been used at Francis Crick Institute also. We fulfilled the clients expectations by meeting the specification and programme, and working closely with planners to interface with other trades. There was some complexity about the project as most doors are very large for equipment access and some have acoustic requirements, also to include is there are a lot of doors in a concentrated area.

Last year, fast food chain Burger King added forty-eight new restaurants to their rapidly growing portfolio. Twinfix were approached by Ideal Building Systems to design, manufacture & install canopies and Brise Soleils at three of the sites in Kent, Clacton-on-Sea and Swindon.With over 30 years’ experience the Twinfix Technical Team had no problems designing structures to suit the requirements and budget of the client.Twinfix’s expert team designed, manufactured, and installed a brise soleil which covered all four sides of the restaurant at the first site in Swindon and fabricated lean to mono-pitch canopies with squared posts and 3mm thick solid aluminium sheet for roof, complete with brise soleil for rear, sides and front at the restaurants in Kent and Clacton-on-Sea.The structures served two purposes, while providing shelter, they also enhanced the aesthetics of the restaurants and complemented the building’s exterior.Each canopy spans 35 square metres and the roof comprises of pressed aluminium roof at a reduced pitch to fit inside the 150 depths of our frame, concealed gutters and downpipes and prepared for soffits by another contractor. The roofs were powder coated in RAL 3020 Traffic Red and squared aluminium posts powder coated to RAL 9006 White Aluminium.The Brise Soleils are constructed from our 150 x75 rectangular hollow section and had to accommodate some wiring for lights that were installed later by another contractor. These are a striking addition to the building fascia.The design of the proposed future sites look set to follow the same format and we look forward to working with Ideal Building Systems on the upcoming projects.

We designed, supplied, installed, and surfaced this new playground in East London, with the project completing in December 2023. The customer was looking for strong, durable, and attractive looking equipment, and our stainless steel range from Spiel Bau was perfect for the requirement. Spiel Bau equipment comes with lifetime guarantees on stainless steel elements, and has been designed to provide excitement and challenge for children of all ages.The centrepiece unit, the Beeskow multiplay, features two decks linked by an inclined rope bridge, monkey bars, a fireman’s pole, traditional slide, rail slide, and an overhanging climbing wall. The stainless steel uprights combined with hardwood robinia decking and panelling gives a beautiful, architectural finish. The large size and wide variety of play features ensures a high number of children can use the structure at any one time, making it a great piece for parks in high use areas such as this.The multiplay was complimented by two stainless steel climbing frames, the first a crow’s nest look out tower and the second an linear, obstacle course style structure. A stainless steel rope end swing, Stainless Steel seesaw, Zip Wire, and two springers rounded off the equipment, all of which was surfaced by our inhouse surfacing teams with black and green fleck wet pour rubber. We loved working on this project, introducing high quality equipment and surfacing to a park in much need of redevelopment.

Drawings of these decorative grilles were supplied to ASF as proposed designs. ASF then specified these up including all manufacturing techniques and grade of bronze. Grilles were waterjet profiled and mounted on ladder frames, with a hidden steel support plate beneath to support the malleable bronze. PB102/EW541K bronze was chosen, a grade of bronze known for high fatigue strength and ductility. The end result is a stunning tree grille that will patina over time, getting better year on year.

Gregg’s has an eye-catching livery with its logo of large white lettering, four orange coloured blocks and the sky blue background The façade was updated with 2mm aluminium cassette panelling coated in Evolution ‘Peat Fire’. This shade is similar to Corten but there is no run-off or staining of surrounding material. The panelling has feature perforations which create an interesting effect, enhanced by the consistent inconsistency of the weathered steel appearance of the coating. The façade will look smart for years with a guarantee of up to 25 years for gloss, colour and adhesion.

The new canopy we recently installed at St Mary’s Catholic Primary School in Whitehaven has provided their nursery children with an additional 32 square metres of covered outdoor learning and playing space. Powder coated in RAL 5010 Matt Blue, the aluminium frame has a roof glazed with our Multi-Link-Panels NF fitted with 25mm opal multiwall polycarbonate glazing. The NF indicates that these panels pass the recommended drop test, ACR[M]001:2014, achieving a Non-Fragile designation. The polycarbonate glazing incorporates a special coating that prevents the passage of UV in sunlight, so it will help to give protection to those underneath.

When architects ACME designed a new landmark retail facility in Leeds, the aim was to build a shopping centre fit for luxury brands. dormakaba supplied HSW-R glass sliding shop front systems, ES200 automatic sliding door entrances & MUNDUS patch fittings, to ensure a high performance access solution with elegant appearance. 150 panels across the arcade, was installed. HSW-R systems include an ITS96 door closer, concealed within frame for discreet appearance. The system’s double glazed panels are supported by aluminium ceiling suspended track avoiding any obstructions for wheelchair users. This creates an ideal access solution for retail entrance settings.

Arla Foods is a major dairy company producing the best dairy products. It is a farmer-owned company committed to high standards.Project/doors:Over 40 doors across multiple sitesThe challengeThe existing doors which were made from aluminium were unreliable and had started corroding. Hygiene is a priority and food production areas require specialist doors to promote cleanliness and avoid contamination. Due to the lack of space, one of the doors required a special solution to be able to effectively install the doorThe solutionHart replaced unreliable aluminium bi-parting doors installed by a competitor with Harts stainless steel Speedor Minis. The Speedor Mini is a made to measure high speed roll up door with multi-layer PVC fabric which is thicker and less prone tears and splits. Stainless steel allows for easy cleaning, contamination prevention and extended life. The Speedor has a life expectance of 20+years.The successHart Doors is the oldest British manufacturer of highspeed doors and has worked with Arla for over 20 years supplying a range of door systems. Arla knows that by choosing Hart its high standards will not be compromised. Arla was given peace of mind with a 2 year warranty as standard and the confidence that Hart would deliver a quality product once again. The Review:"The fitters who attended site were excellent and professional. Well done to them." William Beale, Arla Foods

Triton has supplied 3,280kg of TT Admix, its BBA certified concrete waterproofing system, to a prestigious new build project in West London. The project is a new car dealership situated between the M4 flyover and the site of Brentwood FC's new stadium. The construction comprises a watertight concrete base with welded sheet piled walls and a watertight concrete capping beam to provide a Type B integral waterproofing solution to BS 8102 (2009). On top of the slab is a steel framed structure.

The re-development by Liveman Properties has converted the Dock Office into a mixture of one, two and three-bedroom apartments, with an additional 14 new duplex apartments constructed on the existing building roof. DV Architects, Liverpool, specified Technal’s MX Toggle Glazing curtain walling for the steel frame extension and Technal FY65 windows. Architect Billy Hodge commented, “The Dock Office is a local heritage asset and great care has been taken to make sure that the character of the building is not altered.

Furnitubes designed, engineered, manufactured and installed 35 planters and 8 seating units. The planters were supplied in corten steel and aluminium trusses up to 6m high were bolted into the base of the planters for climbing plants to grow up. The seating is from Furnitubes’ new Elements XL range, designed to be sufficiently stable to not require fixing down, with 4 units including bespoke backrests. All products are heavy enough to not be easily moved by the public, but can be readily moved by pallet truck if the spaces in the Lower Mall need to be rearranged in future.

Scarborough Sports Village includes Prospec Marathon Classic range throughout, with cantilevered and double island bench seating in matching solid grade laminate. Prospec Marathon wet lockers, which include an aluminium carcass for wet areas, are a mixture of 1, 2, 3, and 4 tiers, and feature our new £1 coin return lock. Other products included within our installation would be our Marathon Classic fully framed cubicles, postformed solid grade laminate vanity units and grooming shelves, and floor to ceiling IPS (duct panel systems). This project also features our Disabled Access lockers which comply with Sport England recommendations.

To make the space work for the acoustic and aesthetic requirements, Ryder specified Komfort’s frameless partitioning systems.Komfort’s single and double glazed partitioning systems with 25mm deflection were specified by Ryder in all the meeting rooms on multiple floors. Komfort’s manufacturing team MIG welded together each of the 90-degree corners to create a unique and bespoke design for this project. This helped install speed and resulted in a seamless and high-end appearance by ensuring no separation once glazed.In an aluminium frame, our partitioning creates the appearance of frameless glass with our patented bubble joint. Our systems are designed to balance aesthetics, elegance and durability in any working environment and offer market-leading performance.

As a key part of the University of Lancaster's Preston Campus, the £32 million Engineering Innovation Centre provided the university and Lancashire based manufacturers with state-of-the-art teaching and research facilities. This helps to train an extra 500 graduates, including an increasing number of female students, gaining degrees in subjects such as mechanical, energy technologies and aerospace engineering. Throughout the entire project, there were a number of technical challenges that needed to be met. These include the building's proximity to a very busy roundabout, the floor to floor heights, physical security, the expected levels of solar gain as well as design detailing requirements. Having a total glazed area of 3,100m2, the aluminium curtain wall carries over 40 different types of IG units, along with high density foam inserts utilised alongside decoupling joints in the mullion section - achieving 50 Dnfw flanking sound reduction, as well as 37 dB sound reduction for noise outside the building. In addition to achieving high levels of thermal insulation, being fabricated from aluminium, the curtain walling frame elements can be recycled, helping to achieve the BREEAM rating of Excellent.

Bicester Village, one of the UK’s major outlet shopping villages, has recently undergone a major extension. The work has added additional shopping space and car parking, and Cembrit PB has been used as a render-backer on the exterior facades of the extension. Stockford, the contractor, installed 800m² of Cembrit PB to the steel frame structure and encapsulated it with the stunning MonoTherm TXF system manufactured and supplied by Monocouche Render Systems Ltd to achieve the decorative weather proof finish you see today at the premises.

Fibre cement profiled sheeting from Eternit has been used as part of a £20 million project to refurbish and extend facilities at the heart of Cornwall’s 260-year-old china clay manufacturing industry.Some 5,000m2 of natural grey Profile 6 sheeting was installed on the roof and elevations, and 2,000m2 painted white as an internal roof lining to a new 30x85-metre steel-framed clay drying tube press in Bugle during a 12-month project for Imerys Minerals, the world’s largest china clay producer.