"steel and aluminium frames"

This luxurious residential project incorporated a double level basement with the lower level extending out underneath the garden. In regards to the below ground structure Knowles & Associates Ltd undertook the following works: Excavation and formation of a basement to footprint and under 7 metres below garden level. Two/three stage underpinning. Internal steel staircase frame. Piling. Mass excavation of spoil. Construction of rear extension. Below slab drainage. Cavity drain Waterproofing. Insulation and screed. Swimming pool shell within lower level basement.

A new-build student ‘hub’ providing more than 650 rooms to aid a future generation of learners. The structure consists of a steel frame, Siniat Weather Defence Board, EPS and then finished in our BrickPlus: Eco cladding system. The external BrickPlus: Eco façade increased the thermal performance of the building whilst providing a traditional brick finish.We produced a smooth titanium grey engineering brick to create a clean cut modern finish. There are many bespoke sections including over 30+ specific angles of squints.

Under the national program of revitalization of FRAC (Fonds Régional d'Art Contemporain), the Central Region, in the heart of Orleans, opened a modern building with innovative architecture in September 2013. With the aim to better meet the needs of contemporary art lovers while promoting the historic military supply depot.The architect firm, Jakob + MacFarlane, wished to capitalize on a strong aesthetic in the heart of the urban environment. Built in the old building Subsistances Military, the structure is based on a geometric distortion by the emergence of a dynamic set of three volumes of glass. These three "Turbulence" are wrapped in a metal mesh on the outside and fabric inside. The project architect's intention for FRAC Centre is to create a place of constant change through a "live" and interactive architecture that combines image, light and information. A system of diodes positioned on Turbulence will highlight program FRAC through an animated game designed by Electronic Shadow artists.To ensure complete isolation of the building, the complex architecture and its metal frame, the thermal breaks, Schöck Isokorb® T type S were integrated to treat energy loss at the connection of the frame with the outer skin. Schöck Isokorb® T type S is a steel to steel thermal break connection that takes the bending moment and shear force in cantilevered metal structures.Read more about The Les Turbulences FRAC Centre, featured in Architectural Record.

THE PROJECTThe Avant-garde project features multiple banks of mailboxes that include both vertical and horizontal mail types. The mailboxes used in the project were produced using our high-quality Stainless Steel material with a 316L grade finish.The banks of mailboxes are divided between wall mounted and freestanding installation, providing a solution for a project where the available space is limited. The banks of freestanding mailboxes were mounted upon a support frame custom designed for the project to provide a secure and stable base for the banks.All banks in the project are situated in a finish surround created using American White Oak Veneer with a Wenge Stain to enhance the look and feel of the location.The Avant-garde project is based in the trendy urban London hotspot Shoreditch, and required the mailboxes to be of the very highest quality to enhance the mail reception area.PROJECT DETAILSProject Type: Private AccommodationProduct: Stainless Steel 1 (Vertical) Mailbox | Stainless Steel 2 (Horizontal) MailboxInstallation: Freestanding Accessories :American White Oak Veneer Surround, Engraving

As part of the multi-million-pound restoration of Grade I listed Manchester Town Hall, window restoration specialist Shepley Engineers is restoring, refurbishing, repairing and replacing hundreds of historic leaded and metal casement windows throughout the site using Hodgson Sealants Metal Casement Putty and Leaded Lite Cement. Each piece of glass from the iron-framed leaded lite windows from the state rooms has been removed, cleaned, repaired – or replaced by new fabrications if necessary – and reinstated using Hodgson’s Leaded Lite Cement in Shepley’s on-site restoration studio. The metal casement windows on the lower floors have been removed to Sheffield for restoration using Hodgson’s Metal Casement Putty, a high quality, hand-applied glazing compound that is formulated or bedding and external fronting of single glass into primed steel, timber frames, sealed hardwood and concrete. It is designed to be overpainted as in this project.

Roché are proud to be a specified supplier for Transport for London (TfL).Our shutters are installed throughout the TfL underground and overground network, including the much-anticipated, state-of-the-art Crossrail (Elizabeth Line) project.By collaborating with Walker Construction, amongst others, on various TfL projects, we are playing our part in keeping the capital moving and improving the vital transport infrastructure.Roché’s aluminium and steel shutters are installed on station entrances, ticket offices and kiosks (including Krispy Kreme and Lola’s Cupcakes). Our fire-rated shutters are keeping people safe, whilst security-rated shutters are protecting property.

Neaco’s Techdek aluminium grille system has been specified as maintenance access walkways totalling over 232m in length on the roof structure which crowns the 51,000-seat Estadio BBVA Bancomer in Monterrey, Mexico. Designed by The Kansas City-based Populous, the $200 million stadium is home to Club de Fútbol Monterrey. It features more premium seating than any other football stadium in Latin America and is the most expensive stadium ever built in Mexico. The aluminum-clad design reflects the history of brewing and steel manufacturing in Monterrey with the silhouette of brewing stills inspiring an asymmetrical shape.

We supplied and installed our Spectrum nylon-coated balustrades with glass infills and Neatdek aluminium decking with alternate inserts on every balcony. Frosted glass screens were also supplied between balconies to provide an element of privacy for the occupants. A spokesperson from ENGIE says, “Neaco offered an excellent service from start to finish. They had the task of designing and installing their product to the existing structural steel which they carried out with very few issues and all modifications were handled by the teams promptly and efficiently, so that our programme was maintained throughout. Overall, the service provided was outstanding”.

The Ascot Cycle Compound can help contribute towards gaining ENE8 Cycle storage credits when used in the appropriate situation Shelter manufactured from hot dipped steel Galvanised box section to BSEN ISO1461 Several cladding options including; Wooden slats Wooden boards Waved sheet metal Perforated sheet metal Toughened glass Polycarbonate Aluminium fixing straps Anti climb end panels No crawl under perimeters Angled roof Various gate options i.e swing, slide or automated Padlock/Hasp locking mechanism, swipe or keyed.

Howe Green designed and supplied made-to-measure tree pit covers for a new social dining experience - The Winter Garden at Bluewater. The bespoke panels and frames facilitate access to the root chamber and make maintenance of the highly valuable trees straightforward. The covers were made from 304-grade stainless steel. Each tree pit was manufactured to individual size requirements and to accommodate light fittings. They were supplied with a double-seal to prevent dirt ingress which also helps protect the tree and keep the soil free from contamination.

Skolegade, a street in the Danish city Aarhus, is known for its interesting restaurants, pubs and characterful timber-framed homes. A brand new three storey apartment building was added to the street. The spacious apartments each have access to an ample balcony surrounded by an Easy Glass Slim full glass balustrade. These balustrades allow maximum visibility of the building’s facade, with its striking steel structures. Easy Glass Slim was installed without making any special adjustments to the existing design. The back of the building features Q-railing Juliet balconies.

Three types of fencing were supplied for a prestigious waterfront location on the the River Tay. The design was developed jointly with the City of Dundee Chief Engineer, creating bespoke fencing which made use of modular panels wherever possible to meet the project budget. Roma-3 was used as infill panels to the keyside balustrade. The panel frames were customised with an extensions to carry a hardwood and stainless steel handrail. All the fencing was hot-dip galvanized and polyester powder coated to provide a durable, low maintenance finish to withstand the rigours of the coastal location.

Project DetailProject: Bread Bar RestaurantLocation: Ontario, CanadaProduct: TS.9206 Heavy duty architectural door closerProject DescriptionThe Bread Bar restaurant needed a closer for an aluminium door, and it needed to work invert on the frame. The restaurant required 50 closers in total, to be fitted on a large, external door in a windy location as well as on doors throughout the restaurant. The TS.9206 was ideal because it is:A very heavy duty door closer that withstands the elementsVersatile for multiple door typesAdjustable, which simplifies set-up and ensures the door is not pulled off its hinges during installation‘It takes the hammering that entrance doors get without any query. We used the same throughout the shop with no problems.’ – Brendon Morley, Project Manager

This major redevelopment of Charlton Park Academy school involved replacing temporary mobile classrooms and a single storey building with a two-storey steel framed brick building to better meet the needs of students, teachers and carers. A structural flooring solution was required for use over precast planks, covering 800m2 on the ground and upper floor at a depth of 75mm to 120mm. Space and access would be challenging, due to the small footprint of the site, proximity to the existing school building and access from a busy main road. Given the large floor area, a traditional sand cement screed would have been very time consuming to place. Tarmac’s TOPFLOW SF a self compacting steel fibre reinforced concrete was chosen as the solution. Its flowing nature would allow it to be quickly pumped into place and adapt to the variable thickness criteria. TOPFLOW SF is designed to act as a structural topping with both, steel mesh & fibre reinforcement. The steel fibres added to the TOPFLOW SF gave its robustness and flexural strength as it was being placed over a precast plank system that could flex with loadings. They also reduced the risk of cracking. By replacing steel mesh reinforcement, it helped avoid problems with access, storage and handling and kept the site open for parallel trades. Using TOPFLOW SF rather than a sand cement screed or reinforced concrete, improved productivity and saved time. This saved 13 days or just over 2.5 weeks on the programme. 

A1 Retail Park near Biggleswade has a curved canopy supported by steel columns. Metal columns would not suit the look of the shopping park and wooden posts would require frequent maintenance. 22 aluminium casings up to 8 metres high made from 78 semi-circular sections were coated in wood effect finish were produced to enclose the canopy supports. PWF replicates the appearance of wood with variation in colour, grain density and grain pattern. By using PWF, designers can combine the look of wood with the strength and practicality of metal. Expensive timber need not be used, an environmentally sound decision.

A series of metal column casings with a bright red PPC finish are being used to conceal structural steelwork around the perimeter of Stevenage railway station’s recently opened multi-storey car park in Lytton Way.Bespoke manufactured from aluminium, the 400mm diameter column casings range between 2.7m and 3.0m in height and incorporate apertures to accommodate the galvanised steel ‘crash barriers’ which either pass through the casings or are joined inside.The red finish not only add a splash of colour to the car park’s design, but also provides clear high contrast signalling of its entrance and exit points.

Nestled in Ireland’s Hidden Heartlands, over-looking the Shannon Blueway and River Shannon, Drumhierny is a unique development of high-end holiday lodges situated in a 100 acre woodland estate. This multi-unit project, consists of sixteen lodges, in four distinct architectural styles, each nestled within their own private area of woodland. The lodges have been designed, manufactured, and constructed to achieve an A-rated Building Energy Rating (BER). To help achieve a thermally efficient building envelope a number of products from Partel have been used.The buildings were constructed using an offsite fabricated Light Gauge Steel (LGS) frame. As part of the frame construction a number of Partel’s low carbon building envelope solutions were used. This included EXOPERM MONO 150, a high performing breather membrane, IZOPERM PLUS, a phA Class Passive House Certified vapour control layer; and CONEXO MULTISEAL, a phA Class Passive House Certified airtight tape.

Products designed, supplied, and installed by Furnitubes at Christchurch Gardens include bespoke wall-top seating and steel-framed boundary screens including a wire system for climbing plants and with integrated illuminated signage explaining the historical background of the site. Material quality was of paramount importance to all parties, and steelwork was finished in a specialist bronze coating in keeping with this high-profile site in the heart of Westminster. The scheme presented the further challenge of being delivered during the 2020 Covid lockdown, with Furnitubes’ installation works conducted under strict health and safety controls. The redeveloped site opened to the public in autumn 2020.

Furnitubes designed and manufactured bespoke Akri raised planter beds and integrated seating, framed in corten steel – which we chose for its long term durability in outdoor environments. It’s also a great choice where damage to the steelwork might occur. Planter units were sealed using a protective sealant in order to avoid staining on users’ clothing and the surrounding paving and surfaces. Picnic table units were incorporated to provide adequate resting space for public use. Providing a whole range of new playing experiences, Russell Gardens has been transformed for the betterment and wellness of the local community.

Project: Manufacture and installation of bespoke 3D GRC cladding panels in Tempest Grey colour and Silk finish Client: Morgan Lovell Materials used: Panels were produced using BTX GRC high performance concrete in 3 meter length and only 20mm thickness. Bespoke 3D BTX GRC high performance concrete cladding panels were installed by Living Concrete to the famous 10 Old Bailey entrance. The panels were 3 meters in length each but only 20mm thick. Panels were double fixed to a steel frame and sealed in a Silk finish.

record uk installed a 3 wing all-glass revolving door with a stainless steel frame to provide an attractive and impressive entrance to Horizons House in Aberdeen, a development of prestigious serviced office suites built by Waterloo Quay properties. The revolving door complemented the modern and attractive interior and prevented through draft which otherwise may have posed a problem with the entrance opening directly into the reception area. This revolving door was fitted with a fully automatic in-ground electric mechanism and microprocessor control unit. Safety features are also built in and activated by infrared detectors and overload detection.

Haribo’s new £35m factory in Castleford, which will create almost 300 jobs opened in Spring 2015. The new facility was developed by Wates Construction. Haribo was awarded £6.4m from the government as part of the Regional Growth Fund in 2011. The new plant, which will produce around 48,000 tonnes of treats per year, was built due to its Pontefract facility operating near to capacity. The new facility will include a 30,700 sq ft three-storey manufacturing unit and a four-storey office block. The site also has a steel-framed energy centre and sub-station.

Developed as three separate buildings, the existing tower is being refurbished as high quality apartments with offices and retail, whilst the podium is being replaced with new offices and roof garden. With a fully glazed lobby, a reduced and rationalized core cased in luscious marble and innovative dark bronze-cased windows which sit in the steel frame. The building will be 80% more energy efficient when complete. Effisus Ecofacade Pre-fab Profiles were used to seal façade connections – not only to protect the building from water damage, but also to improve building airtightness and energy efficiency.

The Project Aston University Student Union at the heart of the University’s campus has seen a £6.5m investment.  The new, two-story building, home to over 100 student clubs and societies, acts as the social hub for the 13000+ students at the university & replaces the old 1960’s Building. The Universities brief was to incorporate the local area into the project using images of Birmingham City Skyline. The Challenge Offer a full height cubicle system, suitable for the environment and to a specification befittng the digital imagery. Digitally render images onto Laminate and apply to the façade of the full height system. Manage the precise fabrication process through the factory. The Solution  Excelsior’s Flush 30 Cubicle System encompasses a rebated aluminium frame to the doors and pilasters. The aluminium edge detail provides a robust trim and looks innovative within this modern building, an unrivalled system within the washroom market.The images, supplied by the client were digitally rendered onto laminate by Formica Younique and applied to the façade of a full height Flush system.Max McLoughlin, CEO of the Student Union comments: ‘We want the building to make students feel proud to be at Aston University. From a design perspective, we wanted the students to feel fully immersed in life on campus & we are very happy with the result’.

The Cambridge is a stylish and versatile shelter perfect for all buildings; capable of sheltering up to 24 bikes. In our EasyLift two-tier system extension units can be added to form a larger shelter and house more bikes. Shelter manufactured from hot dipped steel Galvanised 60 x 60 box section to BSEN ISO1461 Composite roof panel as standard – non transparent. Aluminium fixing straps BZP Fixings Angled roof BREEAM AND CODE FOR SUSTAINABLE HOMES COMPLIANT This bike shelter can help contribute towards gaining ENE8 Cycle storage credits when used in the appropriate situation, under the Code for Sustainable Homes

Sutton station, owned and operated by Network Rail needed refurbishment. The station was showing signs of its age, with the old timber work in need of replacing, the roof leaking and the glass roof sections in need of some TLC. Due to their age, the glass roof sections had become fragile and had subsequently broken, Also because of the difficulty in safely cleaning them, they were proving more of a light blocker, than a source of natural light.It was decided that the glass roof sections would need replacing and in order to do this, Twinfix were consulted by Network Rail and asked to offer a solution. Twinfix were mindful of the aesthetics of the station but were also very aware that they could offer something which would provide a long-term solution for the station. Utilising their Multi-Link-Panel System, Twinfix put forward a solution which would do justice to the refurbishment work, the station was receiving whilst bringing the roof up to date and delivering an outcome which would last the test of time. By replacing the old steel and glass sections with their sustainable aluminium and polycarbonate Multi-Link-Panel System, Twinfix’s proposed solution would maintain the look and feel of the old roof, but deliver something which is virtually unbreakable, doesn’t need repairing or regular replacement and would allow routine cleaning to be carried out, keeping the station flooded with light. By replacing the old glass with a slightly obscured 6mm polycarbonate, the light inside the station would be diffused rather than harsh, and significantly brighter than the current situation.The new system would not only last the rigours of time, but is made of sustainable materials. Polycarbonate has minimal impact on the environment and is fully recyclable at the end of its long life. Polycarbonate panels, used in place of glass can be manufactured to give the same look as more traditional glass with features such as Georgian wired but with a significant weight saving. This weight saving means that transportation, manual handling of lifting is easier and requires less energy, plus the structural elements can be reduced as the weight they are required to support is reduced. The result is a total saving on energy and materials needed for installation. Once installed polycarbonate is considerably stronger than glass and is unlikely to break. Depending upon the requirements and location of the installation, Twinfix manufacture a ‘non-fragile’ version which, in testing could withstand far greater impact than an equivalent glass panel. This is especially good for areas where people might accidentally step or fall onto the panels such as rail station roofs. This inherent toughness also reduces the need to replace the glazing panel as often as glass and with UV coatings the panel doesn’t yellow with age or become brittle.Aluminium is known as the ‘Green metal’ due to its ability to be recycled again and again, without degradation of its inherent properties. Recycling aluminium also saves 95% of the energy required in the production of aluminium from raw materials. Compared to traditional steel, aluminium is approximately 2.5 times lighter, strength for strength, so again there is a weight saving comparable to that associated with polycarbonate over glass. Unlike steel, aluminium will not rust, and the application of powder coating will prevent corrosion. Powder coating is a pigment encapsulated in a powdered resin and then cured in an oven to harden the paint surface.Working with the roofing contractor, G.S. Moore, and as part of the larger station refurbishment, delivered by BAM Nuttall, Twinfix were able to replace the existing damaged glass roof in the entrance, the footbridge and the platform adding up to an area over 340 metres square, bathing the covered areas in natural light.Vicky Evans, Director at Twinfix, said; “It was a pleasure working with the team at Network Rail, G.S.Moore and BAM Nuttall. Sutton Station roof was in a dramatic need of replacement. We are proud of the finished product and that we were able to offer a long-term solution that delivers the aesthetic charm of the old roof, increases light levels for passengers, improves safety for all using the station and offers a sustainable, future proof outcome. We look forward to being part of delivering more excellent results for our clients in the future.”

Sheffield based Case Study using the AliDeck Balcony Kit, featuring the Vertical Infill Balustrades

Furnitubes' designers were set the challenge of devising a 3-part seating arrangement for Mark Street Gardens in Hackney. The seating would fit between existing lines of granite setts and alongside retained planting. The benches combine galvanised steel plate ends and sub frame, which sit well within this urban environment, and oiled iroko hardwood slats. Armrests have been carefully positioned to allow maximum usage of the seating area but also to deter rough sleeping which has been an issue at the gardens in the past. We wish Hackney well in their upcoming Green Flag application for Mark Street Gardens.

Assured passive fire protection for a spectacular central atrium in Dublin city centre’s largest and most prestigious new commercial development has been provided by over 300m2 of Promat SYSTEMGLAS® Ferro. The system was selected thanks to its 360 degree ‘wheel of assurance’, which ensures all the fire resistant glazing screens are checked for compliance at every stage from design and specification, through manufacture and installation. The proven butt-jointed, steel framed fire resistant glazing system has been used to create all the glass screens which encapsulate the atrium at the heart of No. 1 Dublin Landings.

Elephant Park is part of a £2.3 billion regeneration project in Elephant & Castle. It comprises a mixed-use development of 3000 new homes and up to 50 shops /retail units all centred around a new 2-acre park. Bolton Gate assisted the Architect with the design of a large electric Multi-Fold Gate to the Service Bay which consists of twelve equal leaves each constructed from an SHS frame with 50 x 10mm vertical steel fins and internal mesh to prevent the ingress of birds. Matching cladding and balustrades completed the elevation all of which were powder coated black.

The scheme includes infilling one third of Alexandra Dock with 780,000 m3 of material and reclaiming 7.5 ha of the river to create a new 650m quay wall, which can accommodate three offshore wind installation vessels.Construction will also involve dredging a new berth pocket, completion of earthworks and surfacing, building internal access roads and service networks, construction of a new Roll-on / Roll-off ramp and demolition of some existing buildings.Our Hody system was used in the 3 Primary Substations on the site to create the first floor decks of the steel framed buildings within the Alexandra Dock project.

Project: Bidfoods Distribution Centre, GlasgowDate: 2022 Background:·        APL were initially engaged directly by the main contractor due to previous supply-chain issues experienced by the client ·        Due to APL’s strong supply-chain relationship, all material was able to be procured and delivered on time to meet the projects programme·        APL provided all thermal and structural calculations Systems:·        10,000m² of APL built-up wall system with steel half-round AP50HR in RAL 9006 and RAL 9007 as the external profile·        APL Tritherm™ GALV sub-framing·        All fixings and accessories  Building Location:·        Glasgow

Product:1no. Bespoke Coniston Wall Mounted Canopy: 74.26m x 3m – 3.5m2no. Standard Coniston Wall Mounted Canopies: 8m x 2.1m and 8.9m x 2.1mCanopy Frame Colour: Light Blue RAL 5012, matt finishInstallation Date: August - September 2019Contractor: Morgan SindallArchitect: Miller Bourne ArchitectsThe BriefIn September 2018, an invitation to tender was received by Able Canopies from Morgan Sindall Construction Ltd for a number of canopies at the brand new two-storey, primary and nursery school for which they had been awarded the contract to build to form part of the Hailsham Community College Academy Trust.After reviewing the tender documents we put our recommended products forward, which was a large Kensington wall mounted canopy and two Coniston wall mounted canopies.The architect then contacted us directly to detail that the main building frame was made up of large timber SIPS panels and the large steel posts were required to support the roof. However, they were also decorative in essence and played a significant part in the building aesthetic appeal, and they required Able Canopies to supply and install them as part of the package as they would run through the larger canopy.The original design and price we submitted did not require the inclusion of the steel posts, however we were then asked to include in our canpy costs. We therefore went back to the drawing board to come up with a canopy design which would fit the aesthetic and structural features required.The SolutionWhilst in talks with the architect, they explained that they favoured our Coniston Wall Mounted Canopy system and also requested the NBS spec for the product which wasn’t a problem as our products are all listed on the NBS National BIM Library.We therefore looked at the Coniston system and worked with the structural engineer to ensure the steel beams could be incorporated into the canopy. This enabled us to supply the contractor and architect with an estimate so we could secure the works as an early package enabling them to cast the foundations required within the main slab.Because the bespoke Coniston would have the required large steel beams through the roof, we designed a solution to ensure the canopy would still be a fully waterproof system. This was easily achieved with the Coniston because we were able to comfortably flash/dress around the roof support columns, to create a seamless walkway with a watertight roof.However, the large steel beams and underside required a lot of design work, we diligently designed bespoke connections for the posts to the beams, bespoke connections for the roof bar to the steel beams and bespoke guttering & gutter connections. This replaced the Coniston’s standard integral guttering system with an external gutter system that worked with the design perfectly.Click the link to continue reading..... https://www.ablecanopies.co.uk/c/wall-mounted-canopy-case-studies/hailsham-community-college-primary-academy-case-study.html

The MG900 is an ideal solution to any project, where it can pitvot, slide or interlock to form a solid glazed partition.Furthermore, the aluminium frame can be coloured to your choice to match your design or branding needs. These panels retain a room’s spacious sense of proportion and maximise light and clear viewing lines. Truly a magnificent office aesthetic.The benefit of our MG900 panels is that they work in the same way as conventional movable walls and can be either single or double point suspension.With the slim back painted border you have clear view visual lines. This allows a superior light flow around the office, cost-effective installation and flexibility in the work environment.Plus the simple fact that they look elegant and classy. Not only these, but they also offer exceptional sound reduction allowing for privacy to be had amongst clients or for important internal meetings.

The official opening of Stourton Park and Ride on 16 September 2021, marks the 150th anniversary of public transport in West Yorkshire. In 1871 a horse tram commenced between the city centre and Headingley. The horse soon gave way to electric trams, trolleybuses and petrol buses, the latter quickly being superseded by those with diesel engines.The £38.5 million public transport project situated in the Stourton area of Leeds, at junction 7 of the M621, was delivered as part of a wider scheme to help Leeds City Council’s aim of transforming the Leeds City Region into a net zero carbon economy by 2038.BAM Nuttall, appointed to develop the site, started detailed designs in January 2019. They approached Twinfix with a requirement for a free-standing mono-pitch canopy and Twinfix worked closely with them to design, manufacture and install a striking canopy spanning 73 square metres.The canopy comprises of the innovative Multi-Link-Panel NF (Non-Fragile) roof glazing system which combines a maintenance-free aluminium frame fitted with virtually unbreakable solid polycarbonate glazing. This innovative system meets the non-fragile requirements outlined in ACR[M]001:2019 and sits over Western Red Cedar roof cladding, aluminium framework and posts, powder-coated in RAL 9005 jet black.The finished canopy enhances the aesthetics of the site, while offering protection from the elements for its visitors.

The Cyclepods Canterbury 20 Bike Compound is a secure facility for bikes with the ability to add extension units to suit most spaces. Shelter manufactured from hot dipped steel Galvanised 50 x 50 box section to BSEN ISO1461 Transparent PET 4mm roof Optional Transparent PET 4mm sides Aluminium fixing straps Anti-climb end panels No crawl under perimeters Angled roof Rear security panel Front security swinging gate Padlock/Hasp locking mechanism BREEAM AND CODE FOR SUSTAINABLE HOMES COMPLIANT This cycle compound can help contribute towards gaining ENE8 Cycle storage credits when used in the appropriate situation