"special fittings"

BackgroundWard Flooring were required to fit a Stair Nosing which met DDA and Equality Act guidelines. Whilst helping to create an attractive and colourful new learning environment for the school’s students.SolutionThe new Q Range, available in 21 special profiles of Stair Nosing proved to be the perfect solution. This unique Stair Nosing design proved to be the most suitable solution for installation in Drapers Mills Primary Academy. Owing to its all over tread design, which provides a slip resistant surface from the nose to the back edge, gives the benefit of extra safety when ascending or descending stairs.The satin etched aluminium riser surface provides the double benefit of being scratch resistant and it inhibits the potential for ‘glare’, which is one of the requirements of the latest BS8300:2008 and Building Regulation guidelines applicable to stairways in areas of Public Access. For more information about the Q Range of Stair Nosings visit www.quantumflooring.co.uk.

Installer – Dearneside Fabrications LimitedMain Contractor – Taylor WimpeyArchitect – PRP ArchitectsClient -Taylor WimpeySystem- Vantage® CS (Coping / Capping system)Loyal customer and expert installer, Dearnside Fabrications Limited contacted us about utilising our Vantage® CS coping on this exclusive residential scheme next to the Chelmer River, Chelmsford, south east England.BTS Vantage® CS system was chosen because it has been designed with many advantages over standard pick and mix systems.Although every CS installation is engineered individually, the coping system is always very quick and easy to fit on site. It is always clipped on ensuring no fixings pierce the top side or front face of the coping. The only visible fixing is located on the inside wall. The capping is located on a robust extruded alloy bracket with specially designed grooves that include a rubber gasket, ensuring a snug watertight and anti-drum fit.The photos do not do the system justice as there is no butt straps needed leaving nice smooth lines and where corner junctions are needed, they just slip into place!As always BTS take great pleasure in supporting a key customer on such a prestigious installation which is now helping to deliver 421 new homes in a thriving riverside quarter development.Dearnside Fabrications Limited

GEC Anderson stainless steel worktops were recently specified by Architects, Dannatt Johnson within the new Learning Spaces and Tea Points within the historic and acclaimed museum. Working for kitchen and bathroom specialists, Brandt Kitchens, GEC Anderson supplied and installed a total of four areas, all within the remit of main contractor, Buxton Building.  Bespoke stainless steel worktops were deployed in two Tea Point and two Learning Spaces. GEC Anderson were able to meet the special detailing requirements prescribed for the various units. 5.0mm SolidTop worktops were specified for the Tea Points that included double sinks and provision for Zip hot water taps and drip trays. In the Learning Spaces, made to measure sink tops with lipped edges and integral back upstands were located in ‘hide away’ areas, behind sliding door sections of the rooms. Managing Director of GEC Anderson comments “This was a really nice project to have been involved with and, actually, is a great showcase of some of the many options that we are able to offer. For instance, in the Learning Space on Level 2, special sized sink bowls were required to fit within the bespoke [narrow] space available, whilst at the same time having space for our lipped edge detail (3) at the front and sides of the worktop perimeter, as well as our upstand edge (10) at the back.  Meanwhile, in the Tea Points, we had the exiting new 5.0mm SolidTops (solid stainless steel, as opposed to the normal, folded, edges). The result of using this detail is always striking with its slim simplicity of form.”

TDS SMET LiteFlo® Lightweight Flowing ScreedAftercare SMET LiteFlo® Lightweight Flowing ScreedSMET Floor Screeds and Compounds Product SelectorWe supplied Pier Contractors Ltd with SMET LiteFlo® Lightweight Flowing Screed for the renovation job in Old Admiralty Building Refurb in London. The product supplied to help deliver the project is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.SMET LiteFlo® Lightweight Flowing Screed is a high-quality, innovative, pumpable factory-produced, CE marked, self-levelling screed based on calcium sulphate. Made from specially selected aggregates, makes it 70% lighter than traditional sand & cement – ultimately this means less is required per m2.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

To update four pairs of manual swing doors at the health club in Wilmslow, which over time had become tired looking and cumbersome after years of wear and tear and replace them with automatic doors to create a welcoming, contact-free entrance for members and staff.

CUPA PIZARRAS has been specified across a major development and refurbishment at Tregenna Castle. The company’s products were selected for their ability to endure extreme local weather and provide an exceptionally long lifespan.Delivering spectacular views of the St Ives coastline, the Castle Approach Estate is a new collection of lodges built in the grounds of the historic Tregenna Castle Resort.Looking to complete the exclusive lodges, roofing contractor, Summit Roofing Solutions utilised a number of CUPA PIZARRAS’ products. Likewise, the project team also chose to use the company’s natural slate to complete a renovation of Tregenna Castle’s original roof.The lodges and castle are subject to difficult coastal conditions, including extreme winds and sea spray. As such, the project team needed access to roofing solutions that could deliver long-lasting, durable performance. Likewise, given Tregenna Castle’s status as a Grade II listed property, the team had to ensure that any selected products were able to deliver a traditional aesthetic, whilst still providing modern performance. Fortunately, CUPA PIZARRAS natural slate was able to meet all the desired criteria.Therefore, roofs on the lodges at Tregenna Estate exclusively used CUPA PIZARRAS’ 400mm x 200mm CUPA 12 natural slates, fixed using 100mm stainless steel hooks that were also produced and supplied by CUPA PIZARRAS.Notably, Summit Roofing Solutions was able to install the natural slate as a closed mitred hip system. In doing so, the project team ensured that all slates lined up perfectly with one another, which is only possible on account of the products’ uniform size and quality. This was particularly important on the lodges, where sections of roof were stepped down in certain locations and visible from ground level. Speaking on the project at Tregenna Estate, Adam Palmer, Company Owner of Summit Roofing Solutions commented: “Upon receiving the brief, we recognized that CUPA PIZARRAS’ solutions could help us to meet all key project goals. What’s more, the company helped us to overcome logistical challenges.”Following project completion, the Tregenna Estate played host to key stakeholders attending the G7 Summit in Cornwall, including the Prime Minister and US President Joe Biden. In anticipation of the event, enhanced security provisions were put in place on the site, which made the logistical side of the project more difficult.Thankfully, through its extensive distribution network, CUPA PIZARRAS was able to devise a well-considered delivery and logistics plan to ensure that supplies could reach the project team at critical times.CUPA 12 was chosen for this prestigious project as it is a high quality dark grey slate with a smooth finish. With a life span of more than one hundred years and very little maintenance required, natural slate is a durable, weatherproof product, un-matched by artificial alternatives. CUPA 12 has also received approval from Snowdonia National Park as a Welsh Slate alternative and has been certified by BRE Global as A+ for its quality, transparency, and sustainability credentials. Find out more about CUPA PIZARRAS solutions here at https://www.cupapizarras.com/uk/  

A major housing provider wanted their new workspace to reflect its corporate and environmental ethos. Vtec's premium wood-slatted system, SupaSlat, was used in the ceiling design. The beauty of the system was it supported the client's green initiatives, as FSC® Certified (FSC® 160047) wood was used. Vtec's SupaSlat system addressed the need for sustainable measures. The beautiful light-coloured grain complimented the sophisticated soft furnishes infusing warmth and vitality to the space. Read more to explore how the Lift and Shift system enabled accessible locations into the T-24 ceiling grid.

Project/ObjectiveProtection of offices from noise and vibration due to dropping freeweights.

The UK's most exclusive and largest bungalow provider needed a refurbished space to tell their story. Vtec was excited to support the designers with a premium and modern ceiling beam design with the MaxiBeam system. The ceiling beams were 39mm x 85mm tall and the decorative ceiling was coffered, creating a sunken rectangle in the space. The ceiling carries occupiers on a journey in the large open areas achieving both visual and functional benefits. Learn more about how the Click Fix installation system made it easy for the beams to be removed for access to M&E services.

Skyliner Sports Centre, Bury St Edmonds

Yaasa Ltd. has established itself as a leading force in the online sale of ergonomically adjustable office furniture. With the expansion of its headquarters in Lannach, the company is creating not only space for innovation and product development but also new, accessible workplaces for up to 50 employees. The building, which was constructed in a strict economical manner, meets the European targets for a “Nearly Zero Emission Building". Thus, Yaasa demonstrates its commitment to sustainability and, with its own showroom, offers customers the opportunity to experience products firsthand. Lindner played a key role in the sustainable interior fit-out of the new company building: By using raised floors made from recycled wood panels, Lindner demonstrates how resource conservation and sustainability in the construction industry can also be put into practice. The wooden floors have the same physical and technical properties as a new flooring system – without compromising the special quality of the working environment. The texture of the wooden floor contributes to a pleasant atmosphere and completes the overall result of homely workspaces.

Project DetailProject: TGI FridaysLocation: The Avenue, O2 Arena, London, UKProduct: TS.9205 BC High usage architectural door closerProject DescriptionThe O2 Arena in London was prime location to enhance the many food stores and eating places. Known by many as a great place to be, it makes sense to serve food where the need is greatest. After a concert, during a football match, or at the time when and where Royalty give special speeches or Charities give heart rendering calls for action, you can be assured that food is being prepared and served to all.The O2 Arena stands at the centre of all time and show cases the TS 9205 iconic high usage door closers that work while you shop or eat or rest. Set at the busiest spot in the restaurant between the stores and the front of house, it shines under pressure and speed of use powering the doors quietly to a closed position. The TS 9205 door closer with its varying power and high efficiency catches the moment in its Satin finish.The TS 9205 architectural, third party UKAS approved door closer was chosen for the refurbishment fit-out with in the many and vast places of the centre because of:High efficiency and ease of operation which matched the regular use and high trafficVariable power size to help ease the speed of fitting and adjusting.35 year guaranteeMatching the aesthetic finish and design for the modern building.

Orbis OS210/OS211 Glass Infill Side and Top FixThe Eastbourne College Project 150 delivered a sports hall, competition pool, fitness suite, squash courts, dining and common rooms, pavilion and 32 classrooms, while also providing connections between key College facilities. The development, to mark the college’s 150th anniversary, enabled the Eastbourne College to take a giant leap forward providing several high-quality facilities in one substantial build. Delta Balustrades worked with the architect from early concept design stages and provided technical expertise and advice. The Orbis balustrade system throughout provided a consistent glass balustrade style throughout the building and could be utilised for the external pavilion areas also. Whilst mainly throughout new build areas of the college, the look and style of the balustrades was especially important to complement the College’s iconic buildings and environment. Due to the proximity to the sea, special attention had to be given to the materials and finishes for the external balustrades, and 316 grade stainless steel with a Lustre bright polished finish was required to be suitable in a marine environment.

The new £75 million Murray Royal Hospital, Perth was officially opened by Scotland’s First Minister Alex Salmond last year. The hospital provides state-of-the-art mental healthcare for adults from across Tayside. Franke supplied all manner of janitorial and healthcare washroom products to the project. Specification was exacting to ensure long and efficient product life and savings in water and energy use. Products from Franke Washroom Systems have included; an array of differing formats of HTM63 stainless steels sinks and worktops, disposal and janitorial units.

Estudio B76 designed its new headquarters in an industrial warehouse built in the 50s. They kept and revealed reinforced concrete trusses and the perimetral walls made of bricks. The design focuses on using glass and steel to maintain the industrial atmosphere.Thanks to active and passive sustainable measures, such as photovoltaic panels, aerothermal energy, and efficient shading solutions, the project achieves high sustainability.From Bandalux, we proposed a combination of systems suitable for both the working and residential parts of this mixed project:, but Veranda Plus is particularly convenient as it completes without denaturing the former structure of the building.

Four rooms affected by noise and dust ingress in the Grade II Listed Harris Manchester College, part of Oxford University had thermal secondary glazing installed by Selectaglaze to lower noise breakthrough and to make the buildings more energy efficient. Selectaglaze installed secondary glazing to 28 windows. A number of products were combined for the specification, including Series 20 slimline vertical units. Series 10 horizontal sliding units were used in conjunction with Series 42 fixed lights and Series 42 curved fixed lights for large gothic arched windows. The College has created a more comfortable environment for all users of its spaces.

The UNIFOLD® Gutter Lining System has recently been installed within five valley gutters, totalling more than 700metres, on the Argos Distribution Centre, Castlegate, Wolverhampton.The facility, operated on behalf of Argos by Wincanton, had experienced severe storm water ingress due to the overwhelming of the existing gutters and outlets, causing severe damage and disruption.The roof had been over-sheeted several years ago and the existing gutters were fitted with a continuous plastics liner at this time.This liner was not lying flat due to expansion and contraction problems, leaving raised areas within the gutter, further reducing the available capacity and contributing to the problems being experienced.Ampteam Limited along with rainwater drainage experts CRM Rainwater Drainage were invited to propose a solution to the problem.Survey and DesignFollowing a survey by Ampteam and CRM, a design solution was provided for the gutters.As the existing gutter had insufficient capacity and any modification to the roof at the eaves position to enlarge the gutter was not an option, the design solution required the use of all of the available space within the eaves cavity.The situation was complicated by the need to control works on the asbestos cement gutters on a building constantly in use. This in turn meant that no extra outlets could be introduced and the existing outlets could not be enlarged.The solution involved the installation of a multi-hinged Unifold gutter, fitted and sealed to the underside of the roof sheet in order to maximise the gutter capacity, combined with specially designed siphonic outlets. As the eaves conditions varied along the gutter runs and within each gutter and access was tight, the UNIFOLD® was supplied with 7no hinges.This facilitated relatively easy installation in very difficult circumstances.Siphonic OutletsThe UNIFOLD® gutter was also provided with factory fabricated side boxes to house the unique siphonic outlets that were designed and tested by Dr Malcolm Wearing of CRM Rainwater Drainage.Although the capacity of the gutters had been increased to the maximum given the existing roof conditions, these siphonic outlets, manufactured and installed by Aquaphonixs Limited, were essential to improve the drainage performance of the existing outlets and to allow the system to function without any additional outlets.Fan shaped, semi-circular siphonic outlets with an offset 100mm diameter tailpipe were specially designed to fit inside the UNIFOLD® side boxes and into the existing 150mm diameter outlets.The siphonic outlet tailpipes were connected to flexible tubes, sleeved into the existing plastic downpipes.The custom made outlets were optimised and tested in laboratory conditions and proved to provide a capacity of over 27litres/second, ten times the capacity of a standard 100mm diameter outlet.Calculations to prove the design solutions of both Unifold gutters and siphonic outlets were provided by CRM Rainwater Drainage.InstallationThe UNIFOLD® gutter system was installed by approved contractors Traditional Structures Limited who, due to the relative complexity of the contract, originally forecast a period of 7 weeks to complete the installation.First class organisation, excellent site personnel and attention to detail by both Traditional Structures and Ampteam Limited meant that the installation was completed in just over 4 weeks with no disruption to processes within the building.

Ghent Diamond CHALLENGE The Ghent Diamond is proudly overlooking the Ghent-Sint-Pieters railway station and surrounding neighbourhood. On top of a stonelike base with a pattern inspired by the city of Ghent’s historical architecture, an impressive crystalline edifice rises. The 33m high office building has – as the name indicates – not only the brilliance, but also the shape of a gigantic, polished diamond with numerous facets. The special design makes the building unique, and that is exactly where the difficulty lies: roof surfaces with different inclines, steep and hard-to-reach slopes, kinks in the façade and a serious wind load. On the pitched roof segments connecting the glass facade, an exterior roof finish with Linius RENSON blades is to be installed. Just for aesthetic reasons! Such a finish creates a nice play of light, shadow and reflection. But this can only be achieved if the finish has been executed perfectly! But how to execute the construction so precisely, and at the same time be perfectly watertight? A true challenge for both architect and roofing contractor. SOLUTIONFor the internationally renowned New York-based architects practice Asymptote this monumental Diamond project is just another jewel in the crown. Innovative and visionary, they always pursue extreme and experimental challenges. And yes, this impressive Diamond really was a challenge, especially for the Belgian ROTEAM roof experts. The special shape, the height and the different slopes up to 47° made it a complex, gargantuan waterproofing project. On top of the steel deck structure tongue and groove insulation panels were installed. This guarantees a strong, perfectly fitting and smooth construction. After all this is very important in order to achieve this monumental task. The high wind load and shear forces were decisive for the choice of roofing membrane to be used on this difficult structure. Asymptote architects therefore opted for the mechanically fastened RENOLIT ALKORPLAN F membrane. This PVC-P roofing membrane is specifically suited for such a project, thanks mainly to its flexibility, lightweight and long life.

TDS SMET LiteFlo® Lightweight Flowing Screed Aftercare SMET LiteFlo® Lightweight Flowing ScreedEPD – LiteFlo® Lightweight Flowing ScreedWe supplied our Smet Supported partner, Floor Screed Ireland with SMET LiteFlo® Lightweight Flowing Screed for the Our Lady of Hope special school in Crumlin. The job was completed by Floor Screed Ireland on behalf of Vision Contracting for the Dept of Education. This lightweight screed is ideal for renovation projects where loading may be an issue. This is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is absolutely ideal for application in high-rise buildings, over timber-suspended floors, timber-frame houses, and in new builds and renovations.LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Check out SMET lightweight screed, lightweight flooring systems, and aggregates (void fillers) suitable for any building project. We demonstrate best practice in construction partnerships - providing a superior level of customer service to our Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.

A barn conversion in Brecon has had a renewable heating system installed, featuring an Aerona³ air source heat pump and a QR hot water cylinder, a system which was designed by Grant UK and installed by a G1 Installer.

Over 250 Profile 22 Optima Flush Tilt and Turn windows were manufactured and installed in a stunning new build contemporary apartment development on a prominent plot in Shirley, West Midlands. The windows manufactured and supplied were Optima Flush Tilt and Turn Windows from Profile 22, the UK’s leading award-winning commercial window system. The fabrication and installation contract was awarded to experienced Profile 22 Approved Contractor Kingfisher Windows, a leading manufacturer and supplier of windows, doors and conservatories.

At Sauna360 we were honoured to be asked by a top London architect to co-operate in the installation of a sauna and steam room in a new gym and wellness suite at his Surrey home.The client had seen our design for a large sauna in a Mayfair mansion and the brief was to replicate this to more compact size to create an intimate family cabin.Sauna: The sauna was lined in special cut Blond Aspen contrasting delicate thin wall panelling, with close fitting bench boards and subtly angled furniture. The full width, low iron glass fascia gives a great feeling of space and excellent viewpoint of those still working out in the gym!Steam Room:The steam room was designed to be more discreet and twinned with a matching luxury bathroom. Our proposal was to decorate the room using beautiful Siminetti natural shell mosaic tiles throughout. These tiles with interesting random surface are nonetheless super thin and therefore perfect to suit the many contours usual in steam room design and are both durable and efficient.To complete, we included a matching door to the bathroom with back painted glass and door lock for discretion.The result: a stunning, statement installation in manageable size for regular home use!

Project: Creative Centre, York St John UniversityClient: Tate+Co ArchitectsScope of project: Design and supply 24 bespoke-sized rooflights for the roof of a triple-height atrium to fit within apertures in a glulam timber grid.Products: 24 bespoke sized em.glaze rooflights, some with concealed actuator smoke ventsThe ChallengeThe roof of the striking 14m, triple-height atrium, which forms the centrepiece of the newly opened Creative Centre at York St John University, features a glulam timber roof grid. Architects Tate+Co wanted to punctuate that grid with bespoke sized rooflights to bring even more light into a space which is used as an exhibition, teaching and theatre space, as well as somewhere for students to mix and relax. The rooflights had to have a sleek, minimalist aesthetic, in line with the overall design intent of the atrium and, because almost all the services in the atrium are hidden, needed to be available with matching concealed actuator smoke vents.The SolutionWhitesales designed and supplied 24 bespoke-sized em.glaze rooflights which suited the specification perfectly. The flush-glazed glass-to-edge design of the em.glaze units with flat sealed glass units fitted within a fully welded, thermally broken aluminium frame achieved the lean, crisp look the architects were looking for. The fact that they were also available with fully concealed actuators in the smoke vents supplied by our affiliate business Sertus was an added bonus. All the rooflights were supplied for the project complete with preformed 300mm PVC splayed upstands, which enabled them to be fitted directly into the glulam grid, saving the contractors time on site. They were also fitted with specially coated glazing which allowed for a degree of solar gain and contributing to the low energy requirements of the BREEAM Excellent rated building.‍The BenefitsAs well as the meeting the design specification, Whitesales’ technical team helped to ensure that the em.glaze rooflights could be installed quickly and efficiently by the main contractors Kier Construction. We estimate that our recommendation to supply the units with preformed 300mm PVC splayed upstands saved the roofing team at least two weeks on site because they didn’t have to construct the upstands themselves and the integrated splay made waterproofing the roof a lot easier. Tate+Co Director Andy Baker-Falkner is delighted with the em.glaze units: “We liked the lean, crisp design of the Whitesales em.glaze units, particularly with the clean white reveal and option for fully concealed vent actuators.”

Smet Supported Partners, Capel (CS) Ltd, completed the floor screed application of SMET LiteFlo® Lightweight Flowing Screed within the improvement works at Harold Wood Station.  A number of improvements were delivered at Harold Wood station in preparation for the new Elizabeth line service, including:A new footbridge over the tracks with new staircasesThree new lifts to provide step-free access to every platformPlatform extensions to accommodate the new, 200m long Elizabeth line trainsNew platform lightingNew station signage, help points, customer information screens, and CCTV.SMET LiteFlo® Lightweight Flowing Screed is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.German-made LiteFlo® is unique, in that it’s the first pumpable lightweight flowing screed. Made from specially selected aggregates, makes it 30% lighter than conventional flowing screeds and therefore 70% lighter than traditional sand & cement – ultimately this means less is required per m2. Another plus is that that screed made from Calcium Sulphate has naturally substantially lower embodied carbon emissions than a sand and cement screed. LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

Private Clinic Blomenburg stands for holism when it comes to the therapy and design concept.A haven in the middle of a beautiful environment in the north of Germany: The 19th Century Blomenburg („Burg“ for castle), is surrounded by a huge park. Away from the everyday hustle and bustle, offering 69 furnished in premium quality, spacious single rooms and suites. The modern bathrooms are equipped with KEUCO furnishings and complement the syntonic interior design. Here the guests can dedicate their soul to regeneration in a quiet and peaceful stylish ambience.The elaborate restoration of the building was carried out taking the historic importance and special use of the Blomenburg into consideration. The new building with its generous glass facade was constructed under the castle rock and now accommodates the guest rooms. Between the old and the new building, there is an approximately 800m² big spa and pool area engrafted in the topography of the castle rock. The historic buildings surrounding the castle yard are used for social purposes, medical fitness, healthy living and mindfulness training of the body, soul and mind. The exclusive design of the indoor rooms is not to be compared with the magnificence of the outside of the buildings.Noble materials and luxurious items of furniture in the guest rooms create an ideal setting for convalescence and relaxation. This temporary home equipped with KEUCO furnishings and accessories in the bathroom offer the guests plenty of storage space for personal care products. Not only do the PLAN vanity unit and tall unit in unobtrusive truffle offer generous storage space, but the light mirror with a frame offers additional storage space. The perfect light lets the windowless bathrooms appear brighter and friendlier. The integrated mirror heating makes it possible to look in the mirror after a hot and relaxing shower.IXMO fittings in a strong design offer intuitive use to reach the right temperature. Matching accessories nicely round-off the bathroom interior in a coherent way and perfectly match the high-class concept of the clinic.

The Hilda Besse building at St Antony’s College, Oxford, one of the country’s best examples of Post-War architecture, has been refurbished by award-winning architectural and heritage consultancy practice Purcell. As part of a sensitive renovation to enhance the original architecture and ensure the building’s sustainable future, Junckers solid wood flooring was fitted throughout the common rooms, kitchens and the dining hall. Informed by historic drawings and photographs, Purcell specified a dark wooden floor, reverting to the original finish found in the building. Junckers Black Oak plank flooring was fitted in a bespoke geometric pattern designed by the architect, complementing the elaborate ceiling features. Junckers’ Approved Flooring Contractor V. A. Hutchison Flooring sampled the bespoke pattern on site and created all the joints and cuts with their own bespoke methods, specially adapted for such intricate work. The result is an elegant floor fit for purpose, offering both a grand impression and a durable floor surface. Junckers Black Oak is made by mimicking the natural process known as ‘bog oak’ where timber left submerged in bog conditions takes on a rich, dark colour. The colour is drawn deep into the wood, unlike a surface stain. This unique method enables sanding and refinishing of the floor without loss of colour. Specifying a solid hardwood floor for the Grade II listed building ensures longevity of both design and use. A Junckers floor has a long lifespan and will last for generations. Part of the refurbishment and conservation work included improving the building’s sustainable performance as well as the wellbeing of staff and students. A solid hardwood floor from Junckers is one of the most sustainable flooring surfaces available. Junckers has completed EPDs for its wooden floors to ensure all elements of the supply chain, from raw material sourcing to production and distribution, adhere to strict sustainability standards. Wood is naturally low in embodied carbon and can easily be recycled at the end of its long life. Wooden floors contribute to a healthy indoor environment by maintaining an even temperature and counter-acting static from electrical appliances. All Junckers wood floors carry the Danish Indoor Climate Label, ensuring there are no chemical substances in the flooring which adversely affect the air quality in a room. The main contractor for the project was CBRE. 

The Brewhouse, formerly known as Farsons Brewery was one of the first and finest examples of concrete-reinforced Art Deco buildings on the island of Malta. The building was founded and designed by Lewis V Farrugia and William Binnie and originally opened 73 years ago in June 1950.Now a Grade II listed building The Brewhouse has been part of a €86 million redevelopment project, reimagined by world-renowned London based ritchie*studio. Covering over 7,000 sq m of industrial space, the building now includes a unique mix of office, food and beverage, retail, visitor experience, and events space over seven floors.In a building of such historical and architectural significance the new windows not only had to look as close to the originals as possible, but also meet stringent requirements for thermal efficiency, as the building was designed to meet the strictest of environmental codes. Clement was thrilled that over one hundred white Clement EB24 steel framed windows were specified, featuring T bars and multi point locking.Robert Abela, the Prime Minister of Malta, was among around 400 people who attended the inauguration ceremony of Trident Park and The Brewhouse, one of the most iconic regeneration projects in Maltese history.ritchie*studio director, Ian Ritchie said: “Clement Windows provided the perfect steel window profile and workmanship solution to help restore this beautiful and iconic Maltese industrial Art Deco building."

TigerTurf completed an Advantage Pro installation at The Avenue Lawn Tennis Club in Havant after their existing Artificial Grass courts needed replacing.

We supplied our partner, Fast Floor Screed Ltd with SMET LiteFlo® Lightweight Flowing Screed for the first floor of a timber frame house. This lightweight screed is ideal for renovation projects where loading is an issue. This is a high quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate. German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates – means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is particularly suitable for use in timber-frame builds, suspended timber floors, tower blocks, apartments, and high-rise buildings. SMET demonstrates best practice in construction partnerships – providing a superior level of customer service to their Smet Supported Partners during the installation process.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET have a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

We supplied Integrated Flooring Technologies with 2,000m2 SMET LiteFlo® Lightweight Flowing Screed for the new-build hotel in Torpichen Street in Edinburgh. The product supplied helped our Smet Supported Partner, to deliver for the principal contractor, Ogilvie Construction, a high-quality pumpable, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates – means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.Innovative SMET LiteFlo® is particularly suitable and absolutely ideal for application in high-rise buildings, over timber-suspended floors, timber-frame houses, and in new builds and renovations. LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article.  Read about SMET LiteFlo® in the Irish Construction News.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie

Radii designed, manufactured and installed solutions for 71 offices and meeting rooms across Baker Botts’ new 27,000 sq ft space.The standout contribution to this project was the installation of stunning curved glazed screens for the executive meeting rooms. Using a Parallel 50 double glazed system with angled façade abutments, the luxurious design was accompanied with acoustic blank 64mm veneered timber doors, achieving 40dB Rw, and flush bonded Align glazed pivoting doors.Baker Botts’ office fronts comprised of Linear 59 single glazed partitions with adjoining Radii Glide sliding doors and bespoke drywall endcaps. Concealed deflection heads helped to create a flush look with clean lines, while a special bronze finish — applied to the metalwork at Radii’s dedicated in-house powder coating line — complemented the colour palette throughout the space.For small-to-medium size meeting rooms Linear 30 and Linear 64 single glazing, both offering 41dB Rw, were used alongside Parallel 50  fins, Glide glazed sliding doors and Align pivoting doors. All meeting rooms for Baker Botts were installed with retro-fit room booking, facilitated with cable routes provided down the door legs.Finally, Linear 25 single glazed partitioning was placed alongside single glazed Hogan door sets with access controls in Baker Botts’ lift lobby.

“We have used products from CMS Danskin Acoustics on a variety of projects and always found them a good company to work with and very helpful to deal with,” said Gerry Winter, Allied Acoustics.The Council’s room was designed for holding meetings, training sessions and information days; but the acoustics in the room were distracting and the internal reverberation meant that hearing people speaking was difficult. CMS Danskin Acoustics engaged with the architect at East Renfrewshire Council to agree on the best solution without compromising on aesthetics, and ensuring they could offer the best value.The SolutionFollowing an on-site consultation at the Council with an external acoustician, CMS Danskin Acoustics was brought on-board to supply 25 SuperPhon® Acoustic Rafts; which are specially designed to reduce reverberation times and to improve listening environments. In addition, the tiles are available in a range of attractive colours meaning that the aesthetics of an internal building are not lost, which was of high importance to the Council. “The SuperPhon® Acoustic Rafts were chosen because they fitted with the style of the building, the need to retain the exposed roof structure and the fact that the fabric colour choice provided a less commercial ‘office feel’ to the final installation,” said Andrew Eaddy, East Renfrewshire Council.The ResultsFollowing the installation, CMS Danskin Acoustics carried out some calculations to evaluate how successful the Acoustic Rafts were performing. The team found that they had managed to bring the reverberation time down from 1.8 seconds to 0.8 seconds, ensuring a much-improved sound quality to the room for its multi-purpose activities.“The client was very happy with the end product at Rouken Glen and there was a substantial sound reduction after the panels were installed,” continued Gerry. “Overall we were very pleased with the results and the chosen product. The ease and speed of the installation, thanks to the bespoke fitting, meant that it wasn’t long before we were able to use the communal room again. We’re really pleased with the finish too, it’s exactly what we had in mind for the space,” concluded Andrew.

Creating a branded retail experience with Breeze acoustic baffles in Rosella Red and black channel to reflect Pearls Bubble Tea’s corporate colour and tie in with the overall theme of the store.

The ProjectLoughborough College provides a range of courses in further education, along with apprenticeships and professional qualifications. It is based on one of the largest student campuses in Europe, sharing the area with Loughborough University. Over 2000 students attend the college, with some living in adjacent halls of residence.The college staircases needed to be refurbished. The flooring was previously terrazzo, and this was to be changed to a rubber flooring. This was suitable in terms of durability and slip resistance for the large amount of people on the campus. To complement the flooring, the stair nosings had to be equally hard-wearing and safe.The stair nosings needed to adhere to all Building Regulations guidelines, along with BS8300:2-2018 and the Equality Act. This meant that they needed to have great slip resistant properties, and stand out from the black flooring to create a ladder effect on the staircases. This would help people to navigate the stairways, especially those with visual impairments.There was a special request from the college which would help to attain this noticeable difference between the stair nosings and the steps: “Hot Rod Pink” tread material, to match Loughborough College colours.The ApproachMidlands Flooring was hired as the flooring contractor for the refurb. As Hot Rod Pink is not a standard stair nosing colour, Dave Wilson from Midlands Flooring got in touch with a number of manufacturers to see if anyone could rise to the challenge.Within 24 hours, Quantum Flooring returned its proposal for manufacturing bespoke Hot Rod Pink tread material specifically for Loughborough College. The unique stair nosing tread would be made from the same material as Quantum’s normal tread, meaning it would be slip resistant and suitable for the frequent foot traffic.Quantum’s SR125R stair nosings were chosen to fit the tread material into. These profiles have a ramped back, to ensure that there would be no trip hazard on the staircases. They are raked back on the riser, to ensure a perfect fit on the steps. Plus, Quantum’s UTA aluminium stair edging trims were fitted, providing a safe and aesthetically pleasing finish to the side of the steps on the open string stairs.The OutcomeQuantum ensured a fast turnaround on the stair nosings, using the QSMS free measuring service. A Quantum representative electronically measured all of the steps to their precise lengths, and sent the results to the distributor Carpet & Flooring in Birmingham for the stair nosings to be cut and drilled.Midlands Flooring fixed the stair nosings with Q-Fix contact adhesive, ensuring a strong bond to the steps. Secret-fix was used to drill the profiles, meaning the tread material could be fitted on site, and there was no need for unsightly plugs to hide the screws in the tread. Quantum’s SR125R stair nosings with Hot Rod Pink tread material look fantastic in Loughborough College. The college was delighted with the results.Loughborough College has a unique, on-brand stair nosing tread for its refurbished stairways. Midlands Flooring did a fantastic job on the project, and Quantum backed them up with innovation and expedience.

A not-for-profit community food business in Sheffield has been reflecting on its success over the past year and praising the support of an addition to the team that allowed them to meet overwhelming demand. Regather, in Highfield, has been established for over a decade and is a sustainable, worker-owned community benefit society, run with co-operative values. With the help of its 15 acre market garden, the team sells fruit and vegetable boxes made up of local produce, by local workers. The BriefAs demand for the fruit and veg boxes grew – space became a premium. Initially, a marquee was put up to extend space outside the building, but this was not a suitable long term solution.‘It came to a point where we either needed to move premises or look for other solutions to reconfigure the building’ says Gareth Roberts founder of Regather. ‘Due to the pandemic moving the business was not a viable option. After much consideration, we decided to repurpose the event space upstairs into another working area. The problem then was getting the 600 – 700kg of produce safely between floors’.The ChallengeRegather only had a very small area for a goods lift to be installed due to the main entrance and a staircase. Goods Lift Design Engineer Umar Lodhi was up to the task and created a MezzLift design that not only fits the space but does not block the entrance to the building when the doors were open. ‘Special thanks to Umar Lodhi, the designer who worked with us to make the lift fit within our restrictive space,’ says Gareth.Another challenge faced by both Regather and Penny Hydraulics was the installation of goods lift during the pandemic. Social distancing was adhered to and the lift was able to be installed on-time with little disruption.The SolutionThe MezzLight goods lift can safely move up to 250kg of goods between floors, providing Regather with the flexibility to reconfigure their workspace. This has helped the business to grow in line with the increased demand, without the need for downtime or the huge expense of moving. ‘I actually did some the prep work myself – within a week the lift was in and up and running, it has really helped to transform the business’ says Gareth.

F. Ball’s high performance subfloor preparation and adhesive products have been used to renovate the floor of a 160m2 school hall at Christ Church CE Primary School in Kent. A combination of Stopgap 600 deep section base compound and Stopgap 200 Smooth acrylic floor smoothing underlayment was used over a Stopgap Waterproof Surface Membrane, firstly to build up the subfloor to the required thickness and then create a smooth, durable surface on which the final floorcovering could be laid. Styccobond F46 pressure sensitive acrylic adhesive was used to secure the vinyl Polyflor XL floorcovering to the finished subfloor...