"silencers and acoustic treatment"

CMS Danskin were able to provide Regupol 4515 (REGUPOL sonus eco) to the prestigious new Gateway project in central Leeds. As the city centre’s largest residential project to date, it has also provided the area with a luxury landmark.In keeping with high-end living, the interior design of the new build project incorporated a number of characteristic atrium and foyer spaces. While this lack of uniformity gave the building and its apartments an impressive level of individuality, it also created irregular shaped rooms which were difficult to work with from a finishing perspective.The finish of the apartments incorporated tiles throughout all of the bathroom and shower areas. To comply with Part E impact sound regulations, an acoustic flooring system had been specified for use under the tiled floor finish. However, when the tile fitters began installation, a number of challenges emerged.Phil Johnson, building development manager at Aqua Interiors, explains:“The acoustic matting and adhesive combination we were initially using at The Gateway caused us a few problems. There were issues from the tile fitters regarding application of the adhesives, and the over flexibility of the system meant that the grouting was cracking and crumbling once the surface was subjected to weight and traffic.” As the tiling contractors were already on-site, a reliable alternative that would meet Part E standards for impact sound had to be sourced and delivered against extremely tight timescales.The SolutionAs the only acoustic tiling system on the market to comply with the UK Tiling Association’s (TTA)Coefficient of Restitution figure (0.56), a test method to assess the impact resistance of ceramic floor tiling, Regupol Acousti-Tile was identified as the best solution to overcome the difficulties being experienced at The Gateway.The main component in the Regupol Acousti-Tile system is Regupol 4515 Multi (REGUPOL sonus eco), a high performance acoustic underlay which isolates impact sound at source. Regupol 4515 Multi (REGUPOL sonus eco), which can be used with any finish, is first bonded to the construction’s base floor using Ardex AF200.Tiles are then laid on top of Regupol 4515 Multi (REGUPOL sonus eco) using BAL Acousti-Bond adhesive. The acoustic tiling system is completed by filling in the joints using an appropriate grout finish, which is dependent upon whether the base floor is concrete or timber.As a complete acoustic tiling system, all components of Regupol Acousti-Tile are delivered to site in a single delivery. Regupol 4515 Multi (REGUPOL sonus eco) and the complete Regupol range is available exclusively in the UK through CMS Acoustics.The ResultThe quality of the finished bathroom environments is in keeping with the ambition and attention to detail of The Gateway project overall. By installing RegupolAcousti-Tile, Aqua Interiors has ensured that the impressive tiled floor surfaces will not cause residents disruption because of excessive noise transfer between dwellings.Having undergone independent site trials, Regupol Acousti-Tile has been shown to achieve an impact sound value of up to 52dB, which is significantly less than the 62dB required by Part E of the Building Regulations.Johnson concludes: “All of the environments were around 4-5m², but there was a great deal of variation in the room shapes and sizes, meaning there were some changes to the setting once we were on-site.Regupol Acousti-Tile was versatile enough to cope with any changes we made – the Regupol 4515 Multi (REGUPOL sonus eco) element was easy to trim and shape while BAL Acousti-Bond offered the same.

Installed were three various sized Topakustik Panels, the 9/2M, 12/4M and 14/2M. Primarily chosen for the aesthetics; these panels also created a better natural environment to combat the acoustic struggles of the modern day work place. We help combat higher reverberation levels, lower the sound pressure levels and diffused those annoying noise frequencies.

20 Water Street in Canary Wharf, London is leading the way for how offices should look and feel in the post-pandemic era. As the HQ for real estate giant, JLL, this serene waterside workspace has become synonymous with sustainability and wellbeing. With high expectations to meet in terms of staff welfare, Tétris knew it needed to ensure each space was designed for appearance but most importantly experience. This meant creating productive workspaces free of distraction, where employees can focus and thrive. It was also vital that teams could easily collaborate in its spaces, without having to raise their voices to be heard. With the ability to absorb sound energy instead of reflecting it, SonaSpray K-13 Special, provided the perfect acoustic solution – giving clarity to speech and keeping unwanted excess noise at bay. Along with many other design benefits, SonaSpray follows the lines of whatever is beneath it, giving architects and designers the freedom to design without the constraints of traditional acoustic methods.Image credits to Jonathan Banks Photography.

Acoustic Products were utilised on the class room teaching space using Topakustik 8/3M to aid with speech intelligibility,combat room reverberation and to lower the sound pressure levels.

Specified and installed specifically for the acoustic and impact resistant properties was our (Topakustik) Topperfo M 16/16/8 (aw 0.75LM Euro Class C, NRC 0.91) perforated panels.

Renzo Piano Building Workshop chose BASWA Phon to create a calm acoustic environment in the Shard main reception. The smooth, seamless finish and versatile detailing options allowed the design aesthetic to be maintained.

Manage acoustics across several UK offices for a high-profile government department. The aim was to create different zones to enhance privacy, manage acoustics and reflect client branding and culture.

The developer behind a Victorian mill conversion in West Yorkshire has achieved superior levels of sound insulation for the building’s separating walls, floors and ceilings through a range bespoke sound insulation systems and products from Hush Acoustics.The redevelopment of the Old Town Mill in the Pennine hills close to Hebden Bridge was undertaken by Clay Developments, with the conversion work managed by its sister-company Clay Construction. Both companies have a strong track record in successfully breathing new life into heritage buildings, but this latest project presented its own unique challenges including how to soundproof each of the newly created individual two- or three-bedroom connected properties.The original mill building was built around 1851, initially for use as a cotton mill. The complex was developed with the construction of a second larger mill building and associated facilities in the 1880s, and it was used for a variety of purposes during its industrial life, including for the production of hosiery yarns, wool combing and sheepskin rug manufacture.Externally the converted building, known as Carding Mill, retains its external character with its distinctive coursed square gritstone walls and Welsh blue slate roof, complemented by high performance aluminium glazing and new features including perimeter walls created using natural reclaimed stone. Internally, however, the transformation has been substantial to remodel the building into residential units which comply with the high performance standards demanded by today’s Building Regulations.The new homes created in Carding Mill could have been designed and built to comply with the minimum acoustic requirements, but that was deemed insufficient to deliver the level of luxury the developer wanted to offer potential buyers. Hence, Clay Construction approached Hush Acoustics to explore the design options and available materials to go beyond what the Building Regulations require for material change of use projects like this.Hush Acoustics supported Clay Construction and the architect, Gagarin Studio, to achieve the optimum separating wall and floor designs throughout, with underfloor heating (UFH) also accommodated.Airborne sound tests in the separating walls revealed levels ranging between 52 and 61 dB DnT,w+Ctr, well above the compliance level of 43 dB. And for impact sound on the separating floors, two tests were carried out which registered levels of 35 and 37 dB L'nT,w, again surpassing the Approved Document E requirement of no higher than 64 dB.

This wonderful acoustically treated auditorium at the Headington School featuring TOPAKUSTIK Lungern micro perforated and solid panels.Architects: Lyons+Sleeman+Hoare ArchitectsContractors: BeardFor any questions or queries do not hesitate to get in contact.

The Spirit of Sittingbourne is a town within itself, offering town centre shopping, city living, hotel and a cinema complex.Within the Travelodge on this town centre development Soundis provided Soundis Acoustic Battens overlaid with an 18mm OSB and mineral wool insulation between the battens. This specification is a perfect combination of providing great impact and airborne acoustic performance due to the resilient layer pre-bonded to the battens along with the void created by the battens and the added mass within the build up from the mineral wool insulation.Acoustic solutions for both airborne and impact noises...The cinema specification on this project was a lot more specialised as are all solutions to the required acoustic flooring within cinemas. The system used on this project was the Soundis CineSystem – Ultra (Concrete/Structural Screed), one of two CineSystems which Soundis offer for anti vibration flooring requirements. This system is the natural choice of a floated build-up when there are no constraints in regard to weight, distribution etc. due the additional mass that this system provides and offers the greatest acoustic benefit.

Background Opened in 1955, Stinchcombe Village Hall has been at the heart of the community in the Gloucestershire village for decades, and it continues to thrive thanks to the dedication of a group of local residents and regular users. An active programme ensures the hall is regularly used for a whole host of activities, classes, clubs, and events for residents, maintaining its original mission to provide a facility that supports physical and mental wellbeing, training and recreation.The committee works to ensure the village hall’s facilities are maintained to a high standard. The hall features dimmable lighting, a stage with seating area, kitchen; and toilets accessible to disabled users, plus another meeting room known as the ‘Committee Room. Over the years Stinchcombe Village Hall has benefited from various upgrading projects, including in recent times improved heating and energy efficient lighting throughout. However, the committee are constantly looking at how they can improve things further, including acoustics.ProblemCharlie Oakhill, Chairman of Stinchcombe Village Hall, approached acoustic specialists Sound Reduction Systems (SRS) to explore the potential for reducing excessive reverberation within the hall during use. The committee had taken the initiative prior to contacting SRS by completing and submitting SRS’s online 3 Step Estimator Form.They wanted to take action to make the hall more acoustically comfortable during regular activities. Users often found it difficult to hear speech and music easily because of the high levels of ambient noise that developed, particularly during performances and busy activities.SolutionUpon receiving key information about Stinchcombe Village Hall, including the dimensions, surface finishes and photographs of the ceiling and walls, SRS were able to input this data into their Sonata acoustic modelling software. This was able to evaluate the existing acoustic performance of the room and specify exactly how much Sonata Class A sound absorption would be required to solve the issue.The Stinchcombe Village Hall committee were then presented with a report detailing predicted before and after performance and a budget estimate for the treatment. Once this had been approved, the next step was for an SRS technical advisor to visit the hall and carry out a dimensional survey to confirm the specification and quote.SRS Sonata Aurio absorbers are a practical and cost effective way to control reverberation inside buildings like this village hall where there are a lot of hard surfaces. The panels comprise a technical, non-shedding, acoustic foam with an acoustically transparent fabric finish to the face and sides. They are easy and quick to install and can be directly bonded to walls and ceilings, and because they are robust, they are perfect for gyms, sports halls or anywhere where ball strikes may occur.Results The site survey was carried out by SRS Director, Alex Docherty. He said:“The presence of hard, acoustically reflective surfaces and lack of soft furnishings was creating a high level of reverberation and echo. This was creating an environment that wasn’t ideal for many activities undertaken within the hall and making speech intelligibility particularly poor. Once the details of the hall had been entered into the SRS computer prediction programme, it showed an estimated mid-frequency reverberation time (Tmf) of 3.73s – way higher than the recommended value of <1.5s for a room of this usage.”After the quotation was approved by the committee, approximately 52m2 of class A Sonata Aurio acoustic panels were installed to the walls and ceiling within the hall, with fantastic results.Client feedbackFollowing completion of the installation, Charlie Oakhill, Chairman of Stinchcombe Village Hall commented:“Thank you for completing the acoustics promptly and a very tidy job. The panels have made a tremendous difference in our hall and I am sure we will get a lot of positive feedback from our users.“Jed the installer did a great job and left everything neat and tidy, he is a credit to SRS. Thanks again and finally we are happy to speak to any potential customers and also happy if they want to come and have a look and a listen.”Products used·       Sonata Aurio panels

A bright creation and fourteen years later, still a current project in its modernity. This project was carried out using a metal structure composed of geometric shapes in diamonds and quadrangles, which was built in the Atrium and BMW Edge amphitheater (sponsor of creation). The originality of this structure was its acoustic quality and high brightness. To obtain such a result, the translucent canvas Moonlight was chosen to enhance the natural light and Acoustic stretched ceiling Barrisol Acoustics® to reduce noise. The layout of the interior space was also thought that the furniture harmonize with the ceiling.

University of Strathclyde TICArchitect: BDPInstaller: Linear Projects LtdProduct: Gustafs Acoustic Panel System and Linear RibsGustafs Panel System was specified for the feature ceiling in the entry foyer as well as walls and ceilings in the lecture theatre at the University of Strathclyde Technology and Innovations building which opened in 2014.The £89 million campus will share facilities with local business, industry and public sector projects as well as being a leading research facility for Health, Energy and Environmental studies.Wall and ceiling panels in natural Oak veneer with SH8 slotted acoustic perforations were used on the atrium ceilings as well as the walls and ceilings of the lecture theatre. Gustafs Panel System was chosen to achieve a consistent look across wall and ceiling elements throughout the campus as well as for the flexibility of acoustic perforation styles and versatile Capax invisible installation systems.The Gustafs ceiling panels in both the foyer and lecture theatre of the Technology and Innovations centre at Strathclyde University were specified to be triangular, this design feature was approached differently for each area.The panels in the lecture theatre were cut and finished at the Gustafs factory to have finished edges on the finished triangles and a border of plain panel around the outside (completed using a special perforation pattern).In the foyer the panels were trimmed at the site finished with the white frames to give the illusion of triangular panels.In addition to Gustafs Panel System at the University, Linear Ribs were used across the vast atrium space along the mezzanine and balcony areas with varying widths of rib in Natural Oak VeneerLinear ribs were specified for its flexibility in design and installation, allowing the product to work continuously around the internal and external curves of the space.In addition to this, linear ribs enable the specifier to vary both the width and depth of each rib as well as the spaces between on a piece by piece basis giving infinite possibility for acoustic performance variations as well as value engineering.

This Freedom Day, as people are able to gather once again in large spaces, such as cinemas, galleries, theatres and offices, this case study we explore the challenges of designing acoustics for public spaces, with our expert guests of Episode 25 - FREEDOM DAY SPECIAL - Acoustics in large public spaces - Richard King - Sandy Brown and Martin Rawlins - BASWA acoustic.  Sandy Brown is the largest independent acoustic consultancy in the UK. Since 1969, they have been at the forefront of building acoustics and are recognised experts in the acoustic design of studios, auditoria and performance spaces. Projects include MediaCity UK, BAFTA - 195 Piccadilly, Leeds Playhouse and Apple Store Marina Bay Sands.  For BASWA, the Swiss pioneers of modern seamless acoustic ceilings, good acoustics are essential to wellbeing - just like natural light. BASWA projects include, The Sala Beckett theater, Barcelona, The V&A Museum Members Bar, London, The Louvre, Paris and Elbphilharmonie, Hamburg. 

The brief to Habit Action was to create a space that was fit for high-profile clients and that would elevate their client's brand taking the business to the next level. Our acoustic solutions, including Breeze Acoustic Ceiling Baffles, played a big part in helping to deliver a space that was comfortable and that everyone would be proud of.

Travelodge have recently started a £100million nationwide modernisation programme as well as an increase of their Hotel brand sites. Travelodge Oxford is a New Build Development on Abingdon Road, built to help with the growing demand for affordable hotel accommodation in Oxford, mainly due to the increase in tourism as well as families visiting students in the city.The new Travelodge on Abingdon Road has 83 rooms, to supplement the demand in the area. The existing Travelodge in Oxford which was built in 1999, also has plans to be upgraded and refurbished with a new entrance, conservatory and a revamped restaurant.Soundis supplied the acoustic flooring at this Travelodge project for the Main Contractor Hinton Design & Build. The Travelodge specification for a high quality acoustic flooring system included 22mm T&G Chipboard and 19mm Plasterboard Plank, over a 30mm high density Rockfloor insulation floor slab with acoustic flanking edging band around the perimeter to separate and isolate all abutments. The whole project required over 1,200 sq metres of acoustic flooring.

See how our innovative acoustic solutions helped create a modern, flexible and social space for accountants and tax advisers across their 10,000 sq ft office in Chelmsford. The project included different colours and textures and given the sensitive nature of some of their work, the scheme also included quiet spaces, meeting rooms and work pods.

Hush Acoustics were tasked with resolving acoustic issues within the King’s House School in South West London.The two Victorian buildings feature a dining hall which had become an extremely noisy environment during lunch service, and this had become disruptive. The hall itself featured hard surfaces throughout with no sound absorption potential, and this was also a problem when the hall was being used to deliver assemblies.Hush Acoustics carried out tests using its Acoustic Modelling Software to measure the reverberation time within the area. Reverberation time is the most common way of expressing a room’s basic acoustic character. It is the time taken for a steady noise to decay by 60dB after its source has been abruptly cut off.After analysing the result of the tests, 31x Hush 50A panels were proposed to be mounted across the ceilings of the two areas to significantly reduce these noise levels. These panels comply with BB93 standards for school acoustics and all the UK Building Regulations relating to acoustics.Feedback from King’s House Estates Management was very positive, saying that the enhancements made to the space made a huge difference for the school as well as the children.Scott Beavers says “Work was carried out professionally and the sound reduction/intensity has decreased dramatically. This has really made a great improvement, thanks!”

In the heart of Blyth’s impressive harbour development, The Commissioners Quay Inn sought out a soundproofing solution, to improve the noise quality within the rooms. Allowing customers enjoy a better night’s sleep, as noise was able to spread to the rooms above.Upon being called from main contractor Bowmer & Kirkland, we won tender to supply 1,358 m2 of 50mm FFT3 Soundis Acoustic Battens including 10mm Soundis Rubber Acoustic Resilient Layer. To reach required Part E of Building Regulations, but also to improve noise quality and allow for creating a void for any under floor applications, such as cables.

BackgroundThe owner and operator of a luxury retirement village in Warwickshire approached Hush Acoustics to improve the acoustic comfort in its main social area after feedback from residents raised concerns about excessive background noise.Lime Tree Village at Dunchurch features a superbly equipped bar and sun room as part of its extensive range of facilities, where residents can relax and socialise. Despite it being a relatively new development, the managers of the complex were receiving feedback from residents that the quality and useability of these rooms was being seriously affected by excessive background noise and sound echoing.Tackling the issue Keen to resolve the situation, the site’s managers approached Hush Acoustics for assistance. Step one was for Hush to visit the site and undertake an extensive survey of Lime Tree Village’s affected spaces – the sun room and the adjoining bar. The acoustic survey carried out by Hush at Lime Tree Village quickly revealed the cause of the background noise issue – common types of reflective, hard surfaces such as plastered walls and wooden furniture were indeed responsible for reverberating sound back into the room. And it was immediately evident that users of the spaces were having to do what most people do in rooms affected in this way – increase their level of speech to try and be heard, which means the issue spirals as everyone attempts to speak over the growing background noise.The solutionThe reverberation solution provided by Hush centres on its Hush Absorber 50 sound absorber panels, which are designed to be strategically mounted on walls or ceilings inside rooms affected by excess background noise. The absorber panels are Class A for the highest sound absorption performance, formed of a 50mm thick acoustic foam which is hand finished in a high quality fabric applied on the face, edges and back.After the site visit, the Hush team were able to calculate how many panels were needed to control the issue and where they would be mounted. A report was prepared for the retirement village managers with a quotation for the supply and installation of the panels recommended and Hush was commissioned to deliver the solution in November 2022. Installation of the Hush Absorber panels was completed in just one day which meant very minimal disruption to the facilities and the improvements were noticed immediately.Client feedbackA representative from Lime Tree Village said:“We always aim to create the best quality environment for our residents, so we are delighted that Hush Acoustics has been able to respond quickly to deliver an effective solution for our sun room and bar. From the initial enquiry to their recommendations and installation service, the process has been professionally managed throughout, and our staff and residents are delighted with the results.”

Architectural practice, dMFK, attract staff back to the office with Oscar Acoustics market-leading SonaSpray acoustic ceiling spray.In 2022, award-winning architectural practice dMFK, in collaboration with architects Sher + White, embarked on refurbishing dMFK’s HQ in Fitzrovia, London, to create a collaborative space for its workforce. They enlisted Oscar Acoustics to help create an acoustically balanced environment which would also work with the aesthetics of the interior space.SonaSpray K-13 was applied in a stunning pale grey colourway to the ceilings of the areas with the greatest potential for excess noise – the communal areas, large meeting rooms, and co-working spaces.On the finished project, De Metz commented: “We’re thrilled with how the office looks and performs. Oscar Acoustic’s SonaSpray is the single most noticeable and effective material in our office and directly contributes to day-to-day comfort and the ability to work without bothering others.”

Acoustic Products are proud to work on this £45million state of the art sports facility for undergraduate, postgraduate and research programmes for Leeds Beckett University. The focal point being the 60m indoor running track.

This Laudescher LINEA Bespoke 2.4.3 acoustic slatted panels with the purpose of managing the reflective nature of the walls within the main entrance area. The extremely specific design of the ceiling panels here where each slat cut from a glulam block so as to achieve a curve that is not stressed. The same product is used inside and outside so as to achieve a seamless finish through the glass.

This fantastic project situated in the Royal College of Surgeons, Dublin was designed by Henry J Lyons who utilised our Topakustik 14/2M (aw 0.90, Absorption Class A, NRC 0.89) system for its aesthetics and acoustic properties. Constructed by Bennett Construction and installed by Commercial Connections our Topakustik system will fight against the large reflective sounds created in such an varse space.

This fantastic project situated in the Royal College of Surgeons, Dublin was designed by Henry J Lyons who utilised our Topakustik 14/2M (aw 0.90, Absorption Class A, NRC 0.89) system for its aesthetics and acoustic properties. Constructed by Bennett Construction and installed by Commercial Connections our Topakustik system will fight against the large reflective sounds created in such an varse space.

Fire rated SonaSpray K-13 in grey was used to provide a decorative acoustic solution throughout client Radius Payment Solutions breakout areas and gym. Chosen by Space Invader Design for its deliberately textured and seamless finish, SonaSpray K-13 achieves superb acoustics without design compromise. By using SonaSpray designers are able to create calm and inviting interiors that sound as good as they look.

Camelot Primary School approached Hush Acoustics to help improve the acoustics with its large dining hall, which was achieved successfully through the installation of Hush Absorber 50A panels.Having been impressed with the ability of Hush Acoustics to effectively treat poor acoustic conditions within educational buildings in a previous project, the school’s executive headteacher approached the company to explore the potential for reducing noise levels in a number of areas.The key room to address, given how busy it can be at lunch and break times, was the dining hall. The high ceilings which feature in the hall create a large volume and it is typically built and decorated with materials that result in many hard surfaces. While these surfaces are highly durable and low maintenance, they can contribute to poor acoustic conditions.The dining hall had become excessively noisy and echoey at peak times, with a significant build-up of background noise resulting from sound reverberation. This is caused when sound waves arereflected off hard surfaces back into the room, meaning that sounds generated through routine use, such as talking, music playing and furniture being moved, become unbearably loud.MEETING THE CHALLENGEHush Acoustics was tasked to provide a solution to the reverberation and echoing problem. The company worked with executive headteacher James Robinson and the school trust previously to successfully address a similar issue at its nearby Cobourg Primary School in 2018 with outstanding results.Step one was for Hush Acoustics to conduct a site survey to gather the information needed for the reverberation calculations in areas of concern. Whilst the survey concentrated on the dining hall, the team was also asked to assess another school hall and four classrooms which were regarded as being very poor acoustically with a view to improving these in future.The survey gathered information on material finishes within the room and the size of the areas as well as providing an opportunity to explore the possible positioning of the panels. The Hush team was then able to feed this information into its calculation software to arrive at the best possible reduction in reverberation.THE SOLUTION24x Hush Absorber 50A panels were mounted to the existing soffit because of the limited space available on the walls, where sound absorber panels are often positioned. The 1200 x 1200mm panels, which feature a 50mm thick acoustic foam and supporting brackets, were installed symmetrically within the bays that formed the ceiling and finished in an outer fabric colour that is consistent with the rest of the room.In terms of the acoustic improvements that could be achieved given the building design and usage, the installation of the absorber panels sought to reduce reverberation by half. The initial acoustic survey estimated that the dining room’s overall mid-frequency reverberation time (T mf ) was 6.01 seconds, but after the Hush Absorber 50A panels were fitted, this was cut to 2.97 seconds.Installation was completed during the school holidays by Hush Acoustics to avoid any disruption to the day-to-day operation of the school.

The timber construction had several challenges of a swimming pool environment. The Laudescher LINEA 2.4.3 (aw-0.90, Absorption Class-A, NRC–0.90) manufactured for its properties to not swell, absorb or mutate while bringing in the usual high quality acoustic properties that absorbs the reflective sounds that will promote greater communication in the pool environment which is vital for teaching and ultimately the safety of the students, teachers, and coaches.

This Edge Grove School has used the Laudescher2.4.3 system that will not only work as an absorbing surface but also works at diffusing the sound. Along with the great acoustic properties the Linea range also adds to the natural aesthetics.

The International Rugby Experience is a new cultural institution and visitor experience to honour the worldwide game of rugby.Niall McLaughlin Architects specified BASWA Phon for its ability to conform to the complex curved design and excellent acoustic performance. The marble plaster acoustic finish was tinted to a bespoke colour and matched to the red bricks used in the project. Over 600 square metres of BASWA Phon was used throughout the project, expertly installed by QT Interiors of Ireland.

Hush Acoustics provided a solution to reverberation issues at the newly extended Queen Elizabeth Hall in the village of Layer de la Haye near Colchester.The hall was designed to be used as a multi-functional amenity for local residents and the general public and is host to anything from Scouts groups to wedding receptions. It was therefore imperative that the acoustics within the building were to a good level to be able to comfortably make use of the hall for all the varying activities.As in many domestic and public places, reverberation and in severe cases, echoes, had become a problem in with mid to high frequency sounds (in most cases) of speech causing disruptive and discomforting noise problems.After an initial inspection, Hush Acoustics proposed the installation of 30x Hush Absorber 50A panels. This Class A sound absorber has built in support frames to allow for bracket fixing to provide an air void behind the absorber for enhanced acoustic performance. The absorber panels were fitted over two days which meant the work had minimal impact to the running of the community activities.The client’s feedback was that the acoustics in the hall after installation “are perfect”.

The Orangery is a Grade I listed building and it’s a key attribute of Kew Gardens as an UNESCO World Heritage Site.During its renovations the Client brief included removal of existing fabric acoustic baffles and installation of a new bespoke acoustic system.Soundis were contracted to supply and install Absorb-R GypLine aw Acoustic Spray Plaster to the ceiling within The Orangery.Absorb-R GypLine aw Acoustic Spray Plaster was chosen due to its seamless finish providing amazing reductions in reverberation times whilst blending into the look of the whole ceiling which gave a sophisticated but modern without compromising the aesthetics of the building. Installation was carried out by our installation partner UK Acoustic Systems

This wonderfully designed project by Spaced Out Architecture incorporates the Topakustik 30/2M in American Walnut. Installed by T & M Building Services the Topakustik 30/2M planks (absorption class c, NRC 0.75) were manufactured with a moisture resistant core board and finished with an American Walnut veneer. Due to the environment of projects with spas and swimming pools the core board ensures the integrity of the structure and acoustic performance of the planks.

Caring Wood is an exceptional private house design, set in a rural location. The interior acoustics were seen as key to user comfort and lifestyle within this family home. The project won the coveted RIBA and Grand Designs House of the Year 2017. This remarkable residential project made excellent use of BASWA, which contributes to a calmer lifestyle within the property without compromising the design. As the house is occupied by three generations of the same family, acoustics play a huge part in wellbeing.

This high-profile London office needed a stunning re-design and high-quality finish to reflect the client’s values and surroundings. Vtec was specified to provide visually stunning acoustic ceilings. The contemporary design encompassed a modern reception area leading to a large open office floor with a staircase to breakout spaces and an attractive roof terrace. Finished to an extremely high standard throughout, the design featured Vtec MaxiBeam ceilings in white Supalami and Supacoustic panels in Oak Supalami. In the kitchen area, Supacoustic panels were specified in an oak Supalami finish and circular perforated design (SP4 with 10mm perforations) echos the circular supporting pillars and helps soften the acoustics.Explore how we ensure pinpoint accuracy in the design and production to ensure seamless integration.

Isolating Hotel Rooms from RestaurantsPreventing noise transmission between the noisy areas of a building to the quiet areas is an ongoing challenge. When the quiet areas are people sleeping and the noisy area is a busy hotel dining room, the problem is particularly acute, but can be resolved by using the appropriate products which are cost effective and easy to install correctly.The ProjectPremier Inn Scarborough North is a new build 105 room, 5-storey hotel with a 68-cover restaurant, which was completed in March 2021. The new hotel was granted planning permission in 2018 and construction was slightly delayed over the Covid lockdown period.Owner of the Premier Inn brand, Whitbread, continues to see strong growth with their UK business continuing to outperform in the midscale and economy market and now has over 800 hotels in the UK. Key to the brand’s message is that wherever you stay in a Premier Inn, you will always get great levels of comfort.The ChallengeSources of noise which affect hotel guests include:External sources of noise and vibrationTransmission between rooms and between rooms and corridorsTransmission from engineering systems (ventilation and air conditioning, heating systems, lifts and so on)Transmission from public areas – reception, conference facilities and in particular restaurants.Noise transmission from restaurants, bars and reception areas becomes a significant challenge where the design of the hotel incorporates these areas on the ground floor of a block, with hotel rooms directly above.Reducing the transmission of noise from a large common area to individual hotel rooms rests principally on isolating the plasterboard or suspended ceiling. To overcome this challenge, a frequent recommendation is to design a ceiling incorporating neoprene isolation hangers.Neoprene Isolation Hangers for HotelsNeoprene isolation hangers are primarily used to isolate suspended sources of audible frequency vibration, such as piping and ductwork systems. They also provide very effective vibration isolation for hanging acoustic ceilings by preventing transmission of noise to the building structure.The isolation hangers supplied for use in the ceiling at Premier Inn Scarborough North were Isogrid Quick-Connect Ceiling Hangers, supplied by CMS Danskin Acoustics.The IsoGrid Quick Connect Ceiling Hanger has a specially designed dual deflection neoprene isolator which allows internal bulging. This enables the neoprene element to achieve greater deflections whilst maintaining lateral stability. Greater deflection translates to greater performance for noise control ceilings.IsoGrid Quick-Connect Ceiling Hangers have several other benefits:They are more cost effective than similar products;The simple design makes them quick and easy to install, providing significant labour savings over conventional sound control ceiling hangers;The known deflection rates ensure acoustical performance under design loads;Tested for airborne, impact and frequency performance to BS EN ISO 10140 requirements;Various attachment methods allow for installation on a variety of ceiling structures, including concrete, metal deck or structural framing;A bronze core serves to prevent poor acoustic performance due to over compression or due to accidental short circuiting of the transmission pathway.InstallationThe ceiling was installed by specialist contractor B W Shrimpton Limited. This was the first time that Shrimpton’s had used IsoGrid hangers, but they were well received.Supervisor Kirk Talbot, who has worked closely with the CMS Danskin Acoustics Team on several projects, explained his preference for the hangers is very much about the ease of installation:“We used Hilti pan head HUS fixings into the soffit for fixing them up, and the lads on site had no issues with them at all.“The IsoGrid hangers are definitely robust enough and easy to fix angle or wires to. On that basis and the cheapness compared to other hangers out there, I’d definitely use them again and will recommend that others do too.”Kirk Talbot, BW Shrimpton LtdTechnical Advice on Acoustics in HotelsCMS Danskin Acoustics are specialists in soundproofing materials and acoustic insulation. Our expert technical team can advise on the specification of a wide range of specialist acoustic and vibration control systems – balancing performance, aesthetics and budget. We provide solutions to treat floors, walls and ceilings, as required, delivering a holistic design approach to sound control for the complete gym or sports hall environment.We don’t just design, manufacture and deliver market leading products. We work with the entire supply chain and project teams to ensure a smooth path from conception to completion.