"rytons building products ltd"
1,042 results found
Relevance
Showing 73-108 of 192
Lidl Chichester West Hampnett Road | SMET Bauprotec | Soldi Investments
SMET Building Products Ltd
DescriptionSoldi Investments completed the new Lidl store in Chichester, West Hampnett Road. Soldi Investments machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render and as Finish Coat; Mineral Finish Coat K. As Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render with the addition of Bauprotec SLP for plinths.For the internal Poroton walls Smet One Coat Projection Plaster was used at a thickness of 15mm. One Coat Projection Plaster Hard Coat is a factory-produced hard coat One Coat Gypsum Plaster designed for machine application produced to EN 13279-1. It is manufactured from a controlled blend of selected gypsum and other components to give a high-quality, high-strength plastering product that is suitable for use in internal plastering.The LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced, mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI. If you’d like to speak to us about your Lidl job – contact SMET. All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.
Lidl Blyth | Plunkett Tiling Contractors | Sopro RS 648 Vibration Slurry
SMET Building Products Ltd
Job: New Lidl Store, BlythSmet Supported Partner: Plunkett Tiling ContractorsSMET Product Used: Sopro RS 648 Vibration SlurryRelated DownloadsTDS Sopro RS 648 Vibration SlurrySmet Professional Tiling Systems BrochureDescriptionSopro RS 648 Vibration Slurry was selected for the LIDL tiling system method of vibro-compaction fixing of porcelain floor tiles, in the Blyth LIDL. Smet Supported Partner, Plunkett Tiling Contractors, selected the superior quality German-made, RS 648 Vibration Slurry, for its flexibility as a bonding slurry for the installation of stone and ceramic coverings, making it ideal for use in vibrated floor systems (or indeed conventional methods).In preparing the floor to LIDL spec, the floor screed is placed, struck off to required levels, and pre-compacted using a straight edge. The bonding layer, namely Sopro RS 648 vibration slurry is applied to prepared and pre-compacted floor screed and ceramic tiles are immediately placed with tightly butted joints to LIDL spec.After installation of a vibratable area (10 – 20 m², depending on situation/ambient conditions and resultant setting behaviour of floor screed), a surface vibrator is passed over floor covering and tiles vibrated into adhesive bed. When sufficiently set, hardened and bonded joints are grouted*.Sopro RS 648 Vibration Slurry is a one-component, fibre-reinforced, polymer-modified, trass-bearing, cementitious bonding and contact slurry. Applied as flexible bonding slurry for installation of stone and ceramic coverings using vibrated floor system or conventional methods. It’s ideal for slurry application technique. Sopro RS 648 is particularly suitable for laying tiles with low water absorption (fully vitrified stoneware). For laying large-format units (30 cm × 60 cm) using vibrated floor system. Also, it can be used as slurry-applied bonding layer on substrates and on bedding adhesive.The product's special properties and SMETs superior technical backup, are key factors in choosing Sopro RS 648 Vibration Slurry. Smet Building Products Ltd is committed to delivering high-quality products to the construction of LIDL stores.For more info on our range of SMET Professional Tiling Products.*We always recommend grouting with Sopro FL 526 Flexible Tile grout in the required colour.
Park View
Forterra Building Products
The ChallengePark View is a residential development of 175 units, including one and two-bedroomed apartments and three, four and five-bedroomed homes. The site sits alongside Saltwell Park, one of Britain’s finest Victorian parks. A conservation area, the design of the site sought to blend tradition with a modern urban feel.The local council required a premium finish for which the choice of brick would play an important part in achieving.The SolutionAfter reviewing several options, Forterra’s Southdown Multi from its Butterley brand range was chosen. It is a high-quality facing brick with a tumbled texture.For some plots on the site, the bricks were laid in an English Garden Wall bond, closely reflecting the brickwork of some of Saltwell Park’s buildings.Alongside modern features, such as rainscreen cladding projections and timber finishes, the development also includes a number of bespoke elements appropriate to the conservation area: reduced window reveals, timber doors and windows coloured in a modern dark grey, natural slate roof tiles, exaggerated roof pitches to accentuate prominent plots and full height feature windows.The BenefitsThe use of Southdown Multi brick has proven to be an effective choice in the successful blending of traditional and modern, ensuring the new development quickly settled within its surrounding environment.
Hardie® Panel - Mitcham Road
James Hardie Building Products Ltd
James Hardie were delighted to support Featherstone Homes on this recent luxury development of 22 apartments on Mitcham Road, London. The project spanned 800 sqm and required our products to be used in walkways, balconies and soffits. The developer’s commitment to their projects is to help purchasers to move in to a home which has been built to exceptional standards and therefore chose James Hardie as one of their trusted partners due to the quality of our products.
fermacell® helps School of Architecture get creative
James Hardie Building Products Ltd
There’s no greater accolade for a building products manufacturer than being specified by architects for architects, and that is exactly what specialist partitioning board supplier fermacell® achieved at the University of Portsmouth. The £9 million building comprises large lecture theatre, seminar room, café and shop over the ground and first floors, and open-plan offices for academic and administrative staff and a post-graduate centre on the upper floors via floor plans which are easily divided and flexible.
Maldron Hotel Swimming Pool Renovation Tiles and Tanking | Precision Building Services
SMET Building Products Ltd
Job: Maldron Hotel Swimming Pool Renovation, Portlaoise, Co. Laois.Smet Supported Partner:Precision Building Services – Mark PembertonProducts: Sopro Rapidur® B5 Rapid Drying Screed BinderMerlin Barrier CoatSopro RAM 3 (454) Renovation and Levelling MortarSopro GD 749 Universal Floor and Wall PrimerSopro DSF® 523 Tanking MembraneSopro PUK 503 PU AdhesiveSopro VF HF 420 – VarioFlex® High Strength Flexible Tile AdhesiveSopro’s No. 1 Flexible Tile AdhesiveSopro FKM® XL 444 – Extra Light Weight Tile AdhesiveSopro Sanitary SiliconeSopro DE 014/015 Sealing CornersSopro FEP 508Sopro DBF-638Racofix 818Description:SMET supplied Smet Supported Partner, Precision Building Services (Mark Pemberton), for the renovation of the Maldron Hotel Swimming Pool, Portlaoise, Co. Laois. A total area of Floor screed @ 140m² | Wall tiling @125m² | Floor tiling @ 140 m² was completed.New floor installation with fast-track – rapid drying floor screed solution, using Sopro Rapidur® B5 Rapid Drying Screed Binder, a fast-setting screed which was laid to falls prior to waterproofing and tiling providing an early completion. German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical production of high-strength, rapid-set cement screed – based on DIN 18560.Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.Sopro Rapidur® B5 was installed directly on top of Merlin Barrier Coat wet on wet. The screed was ready for waterproofing/tiling after 3 days. This system was also used to repair the Jacuzzi’s surrounding walls prior to waterproofing, tiling, and grouting.Sopro RAM 3 levelled the deck area (3-60mm) between the drainage channel edge and pool perimeter movement joint. Sopro RAM 3 was bonded with Sopro GD 749.
Doddington Housing
Forterra Building Products
13 new dwellings situated in the small village of Doddington, Lincolnshire are providing much-needed affordable housing for people working at nearby Doddington Hall.Located on Main Street, the development enhances this area of the village, providing important infill on the site once occupied by the local school, which was demolished in the 1960s and has latterly been used as a car park and general storage area. It is bordered by a mix of farmland, mature trees and shrubs, and existing housing, and lies partially within a conservation area.The development comprises two 2-bedroomed, five 3-bedroomed and six 4-bedroomed terraced and semi-detached dwellings. One of the terraces fronts onto Main Street while the remainder have been sensitively designed to create an attractive group of dwellings centred around a newly-created ‘village green’.Perhaps the most significant element of the appearance of the scheme is the elevation of the terraces towards Main Street. In developing the specifically tailored to design for this elevation, account was taken of the nature of the surrounding buildings within the village.Although not prominent to public view, the balance of the development has been designed in a manner sympathetic to the architectural vernacular found within the village. With a common thread running-through which will serve to unify the development and reinforce the sense-of-place which is presented by the scheme.In particular, simple, uncomplicated/uncluttered designs have been developed. High quality materials have been utilised for the development, essential in reinforcing the architectural character of the development, reflecting the high-quality of other developments which have been executed within the village recently.The brick selected was Forterra’s Butterley Breckland Multi Reserve, a red brick with a tumbled texture.
LiteFlo® Lightweight Flowing Screed | Harold Wood Station | Capel CS Ltd
SMET Building Products Ltd
Smet Supported Partners, Capel (CS) Ltd, completed the floor screed application of SMET LiteFlo® Lightweight Flowing Screed within the improvement works at Harold Wood Station. A number of improvements were delivered at Harold Wood station in preparation for the new Elizabeth line service, including:A new footbridge over the tracks with new staircasesThree new lifts to provide step-free access to every platformPlatform extensions to accommodate the new, 200m long Elizabeth line trainsNew platform lightingNew station signage, help points, customer information screens, and CCTV.SMET LiteFlo® Lightweight Flowing Screed is a high-quality pumpable, factory-produced, CE marked, self-levelling screed based on calcium sulphate.German-made SMET LiteFlo® is unique because it’s the first pumpable lightweight flowing screed available. Made from specially selected aggregates - means it’s 30% lighter than conventional flowing screeds and can be laid in reduced thicknesses. The screed offers a high yield, 43kg per m2 @ 40mm.German-made LiteFlo® is unique, in that it’s the first pumpable lightweight flowing screed. Made from specially selected aggregates, makes it 30% lighter than conventional flowing screeds and therefore 70% lighter than traditional sand & cement – ultimately this means less is required per m2. Another plus is that that screed made from Calcium Sulphate has naturally substantially lower embodied carbon emissions than a sand and cement screed. LiteFlo® complies with EN 13813: 2002, is CE-marked, and is available in 27Kg bags or bulk silos.Have a look at the Northern Builder MagazineTop 5 Liquid Screeds Article. Read about SMET LiteFlo® in the Irish Construction News.Whether your job is – self-build, retro-fit, floor renovation or repair, design floor, commercial or shop, sustainable build, historical renovation, ECO build, Lightweight, or an industrial flooring venture – SMET has a flooring compound or ready to use product suitable for your application.www.smetbuildingproducts.com or www.smet.ie
Lidl Andover | SMET Bauprotec Render System | B Team Shopfitters
SMET Building Products Ltd
DescriptionSmet Supported Partner, B Team Shopfitters machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render and as Finish Coat; Mineral Finish Coat K. As Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render with the addition of Bauprotec SLP for plinths.The Internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI. If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.Related DownloadsTDS CASEA Bauprotec 850 M – Lightweight Lime Cement RenderTDS CASEA Bauprotec RHS – Multi-Purpose RenderTDS CASEA Bauprotec SLP Tanking and Plinth RenderTDS CASEA Mineral Finish Coat – KSMET Render and Plaster Product Selector
The Paddocks Development
Timloc Building Products
Castlethorpe Homes is a renowned house builder serving some of the most attractive and historically rich villages, towns, and cities across Oxfordshire, the Cotswolds, and their surrounding areas. The Paddocks, an exclusive development by Castlethorpe Homes, features substantial detached houses nestled in the semi-rural location of Bramley. This distinctive project reflects their commitment to environmental sustainability. Beyond the construction phase, they have actively incorporated Bio-Diversity Net Gain initiatives, contributing ‘green elements’ to counterbalance the impact of their building works. As well as an additional 10-meter wild meadow buffer, the development boasts over 250 meters of native hedging, bee bricks, bat tiles and specially designed hibernacula providing shelter for slowworms and newts, Castlethorpe Homes also installed Hedgehog Highways. “Hundreds and thousands of homes are built in the UK every year, but how many prioritize environmental and social impacts? At Castlethorpe Homes, sustainability is not an afterthought; it is ingrained in our design. We collaborate with suppliers who share our commitment to the bigger picture. The Hedgehog Highway by Timloc is the perfect fit, allowing hedgehogs to roam freely in our green spaces.” Chris Warner, Founder & Managing Director of Castlethorpe Homes The Hedgehog Highway by Timloc has been designed to connect gardens, enabling hedgehogs to roam freely and forage for food, water and shelter without restriction. It perfectly frames highway holes to help state the purpose of the hole and avoid accidental obstruction whilst being a great garden feature. With every purchase of a Hedgehog Highway by Timloc a donation is made to hedgehog charities to aid their efforts in rescuing, rehabilitating and releasing sick or injured hedgehogs back in to the wild. To learn more about Hedgehog Highway by Timloc visit: www.timloc.co.uk For further information on Castlethorpe Homes go to www.castlethorpehomes.co.uk Photo: Hedgehog Highway by Timloc in situ at The Paddocks, Bramley, kindly provided by Castlethorpe Homes.
Houses of Parliament - London
Ardex UK Ltd – High Performance Flooring, Tiling, Screeding and Building Products
As part of a major refurbishment of listed parliamentary estate buildings, only ARDEX products were trusted to restore and protect these iconic working areas for years to come.
Norfolk House Phase 2
Forterra Building Products
The ChallengeNearly 400,000 Forterra-supplied bricks have been used to construct a striking new nine-storey block of apartments in the Baltic Triangle area of Liverpool.Phase 2 of Norfolk House, on Simpson Street, is made up of 100 affordable apartments aimed at young professionals and students, and its architecture creates a link between the Georgian red brick warehouses of the area and the modern aluminium and glass buildings in the city centre.PROJECT INFOPRODUCT DETAILThe SolutionForterra’s recently launched high quality Farmstead Antique facing bricks were manufactured at the firm’s Accrington brickworks, and Norfolk House Phase 2 was the first large-scale project to utilise them.Architect James Tartt said “The Baltic is a trendy, up-and-coming cultural quarter of Liverpool set in the city’s historic docklands, and we wanted the design and brickwork of this scheme to reflect the renovated warehouses of the area, some of which date back to the 18th Century.“To this end, we had sample walls constructed at the site in the early stages before building work began, where we tested different types of brick and mortar to ensure they matched the surrounding architecture as closely as possible. Forterra’s Farmstead Antique bricks were ideal for this job.”The BenefitsIan Shard, Commercial Director of Lancashire Brick, who specified the job, said, “We knew we wanted quality new bricks which matched the area, and using Forterra’s handy online Brick Matching app we were able to find the closest brick type possible for our clients.”Forterra nominated the finished project for the 2018 Brick Awards, in the Large Housing Development category.
LIDL North Hykeham | SMET Bauprotec Render Spec | Adston Construction
SMET Building Products Ltd
Smet Supported Partner, Adston Construction, machine applied the LIDL External Render System onto Poroton blocks consisting of a Base Coat of Bauprotec 850 M – Lightweight Lime Cement Render, Façade System Primer and a Finish Coat of Mineral Finish Coat. The Plinth Render used is Bauprotec SLP – Lightweight Plinth and Tanking Render. Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete: Bauprotec RHS was used.The Internal Render System specification onto Poroton blockwork consists of Single Coat: Bauprotec 850 M, Lightweight Lime Cement Render. A smooth finish is required in the sales area, so either 850M steel trowelled smooth or skim finished. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS used.The LIDL render system, available from SMET:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.Mineral Finish Coat – K is a CE marked, factory-produced, mineral-based, high-quality finish-coat render, specially designed for hand and machine application to EN 998-1, 2010.CASEA Bauprotec SLP is a CE Marked, factory-produced Lightweight Sand & Cement Render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and Smet Supported Partner superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering Contractors across the UK and ROI. If you need to speak to us - click to contact SMET.All LIDL spec SMET Render System products are available from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.
Duke Court
Forterra Building Products
Duke Court is a development of 37 affordable homes for rent, built on the site of Fred Styles House, formerly a sheltered housing block, providing 42 bedsits, that had been empty since 2013. The development is part of Royal Borough of Greenwich’s commitment to delivering new high-quality homes and sustainable communities.The new development of 29 houses, 7 flats and 1 maisonette creates a pretty neighbourhood of terraced houses running along Charlton Church Lane, and a series of mews streets which run perpendicular connecting into the urban fabric behind the site. Glazed screens lead into a generous open plan kitchen dining room. Stairs lead up to bedrooms and to a light and airy open plan living room with fully glazed screens leading out onto a secluded sun trap roof terrace.The buildings along Charlton Church Lane alternate in height between two, and three storeys. The houses are built from a beautiful soft and rustic brick that helps ensure that the new homes feel embedded and ‘worn in’ to the surrounding area. The brick selected was Forterra’s Ecostock Belgravia Gault Blend. Its varied tone is important for ensuring the new homes do not feel too monolithic adding visual interest, factors that were integral to reassuring planners that the brick would be sensitive to its surrounding context.Low cost, robust but high quality brick detailing is integral to the project. Traditionally built brick arches front a number of the homes and help create a semi-private space where people can put out pots and plants, wellies and umbrellas etc. Snapped headers create tightly curved external walls where the site requires thinner accommodation. Other brick details include projecting brick surrounds to pop-up windows, arched window heads, soldier and header courses, articulated parapets and beautiful angled window reveals on prominent corners.
Burj Khalifa - Dubai
Ardex UK Ltd – High Performance Flooring, Tiling, Screeding and Building Products
Up to 186 floors of the world’s tallest building were levelled with ARDEX products – the largest volume of levelling and smoothing compound used on one project in the company’s history.
Südanit 280 Alpha Hemihydrate | Mobile Screed Factory | Fast Floor Screed | 20,000 m2 apartments Dublin
SMET Building Products Ltd
We supplied our Südanit 280 Alpha Hemihydrate Binder to our Smet Supported Partner, Fast Floor Screed Ltd, who pump-applied their self-levelling, Südanit 280 Alpha Hemihydrate Screed in this amazing new apartment development for Cairn Home Plc in Dublin.The delivery, completed using their mobile screed factories, enabled Alpha Hemihydrate Screed flooring solution to be installed quickly and efficiently over the entire project over two sessions. The apartments are amazing looking: https://www.cairnhomes.com/new-homes/marianella/This CE marked, self-smoothing, self-levelling screed is the most technologically advanced floor screed available, complying with the performance requirements of EN 13813.Südanit 280 Alpha Hemihydrate Screed’s advanced composition means that it reacts with water quickly – providing consistent, reliable drying characteristics and considerably faster drying times – enabling follow-on trades to proceed without delay.The Fast Floor Screed Mobile Screed Factory – is a unique system. The lorry mounted rigs carry Sudanit 280 Alpha Hemihydrate binder, sand & aggregates and water in separate compartments. The automatic production process ensures materials are precisely weighed, fed to the mixing bin, and into the pump for easy, mess-free installation. Ensuring the Fast Floor Screed Mobile Screed Factory produces Sudanit 280 Alpha Hemihydrate floor screed to a consistently high quality. Have a look at Fast Floor Screed past projects.The floor is remarkably quick to walk-on – applied at 500m² per day and walkable within 6 hours and it’s particularly suitable for use with UFH, fully encapsulating pipes and services – increasing the performance of underfloor heating, maximising your insulation, and therefore improving your building’s U-Values performance.Check out more projects using this screed:https://www.smetbuildingproducts.com/projects/by-product/casea-sudanit-280-alpha-hemihydrate-binder/Whether your job is self-build, retro-fit, floor renovation, design, commercial or industrial venture – we have a floor compound suitable for you.Contact Smet Building Products Ltd for any advice regarding your substrate.Related DownloadsTDS CASEA Sudanit 280 BinderEPD – CASEA Calcium Sulphate Flowing ScreedTDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System ITDS SMET_Tiling Onto Calcium Sulphate Floor Screed_System II
Rainscreen Cladding at Spreytonway & Moberly House
Dales Fabrications Ltd - Aluminium Eaves Products
Project type: Student Accommodation Location: Spreytonway & Moberly House, St Germans Road, Exeter, EX4 6TJ Project Cost: £41m Product: Meridian Coping System Finish: Syntha Pulvin RAL 7016 Anthracite Grey Fire Rating: A2 s1, d0 Non-combustible (Reaction to Fire EN BS 13501-1:2018) Product: Rainscreen Cladding (Dales DF-System Panels) Finish: Powdertech Corby Peat Fire (Corten) Fire Rating:A2-s1, d0 (EN BS 13501-1). Architect: Willmore Iles Architects Contractor: Vinci Construction UK Ltd Sub Contractor: Longworth Building Services Ltd
James Watt Dock
Forterra Building Products
James Watt Dock is a development of 137 new-build one- and two-bedroomed flats for social rent. The homes, built over five blocks, will offer residents magnificent views over the historic dock and the River Clyde. Residents will also benefit from parking, amenity units, and a landscaped public space.PROJECT INFOThe site is a brownfield waterfront site adjacent to the Grade A listed Sugar Sheds, which are a unique example of Scotland’s Victorian industrial architecture. The sheds became the design driver, aiding the architects in establishing mass, orientation, position and material.Farmstead Antique, from Forterra’s Butterley range, with its tumbled and distressed multi patches, was selected for its similarity to the bricks used in the Sugar Sheds. It allowed the design of the new development to relate to the historic building while delivering a modern, clean-cut façade.With a water absorbency of only 7%, the brick also offered the high technical performance required owing to the development’s location on the Firth of the Clyde, a robust marine environment.
Guy Nelson Hall
Forterra Building Products
The ChallengeBuilt in the 1960s, Warwick School’s Guy Nelson Hall was no longer fulfilling the needs of a modern, growing school. As well as not being too small to accommodate increasing student numbers during exams and large events, technical and IT infrastructure upgrades were needed to continue its use as a theatre space for the community.Located at the heart of the school’s site, the hall plays an important role in creating a good first impression for visitors to the school. Any redevelopment of the hall would also need to complement the existing buildings.The SolutionForterra’s County Multi Smooth, part of the Butterley range, a heritage brand that has been synonymous with brick making in the UK for over 150 years and is manufactured at Forterra’s Wilnecote brickworks. It was the ideal construction material for the project, enabling freedom of design with regard to form, scale and mass, while making a visual link with surrounding masonry.The brick gives a modern, uniform finish, which complements the smooth finish of the glass and concrete panels that also form part of the hall’s design.The BenefitsFollowing extensive redevelopment, that included the addition of an entrance foyer, kitchen, performance studios and a balcony area, Guy Nelson Hall has been transformed from school hall to a state-of-the-art 1,000 multi-use venue and concert hall.The clever design and materials used in the hall’s redevelopment have resulted in a building that incorporates modern design elements, such as its sweeping, curved façade, while blending perfectly with the existing vernacular. There has also been a significant improvement to the buildings acoustics.The project was completed in July 2016 ready for the new school intake in September that year.
SMET One Coat Projection Plaster | Machine Applied | New Build
SMET Building Products Ltd
DescriptionSMET One Coat Projection Plaster HC 9-20mm Hard Coat Gypsum Plaster is a factory-produced Hard Coat One Coat Gypsum Plaster designed for machine application produced to EN 13279-1. Manufactured from a controlled blend of selected gypsum and other components to give a high-quality, high-strength plastering product suitable for use in internal plastering.The unique properties of this render make it suitable for application on low, medium, and high-density blockwork substrates.Benefits of SMET One Coat Projection PlasterOne coat machine applicationHigh strengthPerfect workabilityPerfect smooth finish in one coatHigh whiteness indexSustainableApplication up to 20mm in one passDIN EN 13279-1, B1
baseTherm® is an NSAI Agrément certified BEPS liquid floor insulation, complete with its own EPD.
SMET Building Products Ltd
baseTherm® is produced and installed on-site by our local team using our Mobile Floor Insulation Factory - without waste or fuss.�baseTherm® KEY BENEFITS: � Seamless, void-free poured floor insulation� Factory-produced on-site, without waste - using our Mobile Floor Insulation Factory� Rapid pumped installation� Non-combustible� Ultra-lightweight with acoustic benefits� Highly insulating, from 0.041 W/mK� National Standards Authority of Ireland (NSAI) Agrément certified � EPD Certified – available to download on Irish Green Building Council's platform EPD Ireland� Available for spec on NBS Source and as BIM Digital ObjectsContact your local team baseTherm® for amazing insulation results:�+353 (0) 87 333 0683�+353 (0) 87 223 2456� sales@basetherm.com�basetherm.comClick here to view more finished jobs on our GALLERY:https://lnkd.in/e9zh-nwx#EPD #basetherm #BEPS #pouredinsulation #insulation #koreinsulation #liquidfloorinsulation #floorinsulation #beadscreed Fast Floor Screed Ltd Eddie Hussey Smet Building Products Limited KORE Insulation NBS
Gleneagles Hotel, Spa and Golf Resort
Ardex UK Ltd – High Performance Flooring, Tiling, Screeding and Building Products
“ARDEX helped us through each stage, from specification writing of the project to on-site visits. The support was second to none.” Paul Lovell, MD of Leisure Design Ltd
Tate Modern Seating
Forterra Building Products
The ChallengeThe designer of an exhibition at Tate Modern in London wanted to build a series of stools and benches out of bricks, but instead of using ordinary, rectangular bricks they wanted to use something more unusual.The live, public exhibition, called Endless Book Club, would see reading enthusiasts from notable book clubs sit on the brick benches and stools while discussing their chosen books, in the Turbine Hall of the famous art gallery.The SolutionForterra’s Cradley Heath facility provided over 500 special shaped bricks to create more than 20 seats as part of the exhibition.Cradley Special Brick has provided millions of non-standard bricks for refurbishments of listed buildings, luxury newbuilds and one-off projects including schools and leisure centres. Forterra have made more than 7,000 different bespoke bricks over the years for clients across the UK and as far away as Saudi Arabia and Scandinavia.The BenefitsBook clubs from the Royal College of Art and the Institute of Psychoanalysis took part in the event, which was produced by Self Publish, Be Happy.Bruno Ceschel, Director of Self Publish, said, “The brick seats are visually very striking and we’re thrilled with the results.”
Bateman's Tower Cafe, Brightlingsea
BPD Building Product Design Ltd
DG Timber Solutions, specialist designers
and manufacturers of timber frame
construction were awarded the contract
to build the structure’s wall panels in the
factory and install on-site, with the
objective of achieving an overall wall
U-value of 0.20W/m²K.
Oxford High School - Ada Benson Building
Acoustic Products Ltd
The Ada Benson Centre for Sixth Form and the Arts used our Topakustik 29/3M
system has been utilised to assist the foyer, atria and circulation system to combat Sound Propagation, Reverberation and Sound Pressure levels in line with the Building Bulletin 93.
Lidl Youghal Co Cork | SMET Bauprotec Render System | NRS Construction
SMET Building Products Ltd
DescriptionLocal Smet Supported Partner, master builders NRS Group Construction, machine-applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render, and as Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render.The internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The Irish LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and the Smet Supported Partner’s superior technical backup, are key factors in choosing SMET. SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI. If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, who ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI. If you’d like to speak to us about your Lidl job – contact SMET.
Westfield Shopping Centre
Radmat Building Products Ltd
The Westfield Centre in Shepherd‘s Bush has one of the largest roofs ever designed in central London to cover the retail floor area of 150,000 m² (about 30 football pitches).The centre was developed by the Westfield Group at a cost of £1.6bn, choosing PermaQuik over the huge selection of waterproofing systems to provide the long term security necessary to protect one of the most expensive areas of retail space in the world.
Insulated Loft Spaces
Manthorpe Building Products Ltd
The increased levels of thermal insulation found within the roof voids of a modern house is intended to reduce the amount of heat that is lost from the warm living spaces of the property over time. However breaks in this insulation layer, such as through the loft access door, will severely compromise its effectiveness.
This editorial explains how to avoid losing heat in the loft space and therefore losing money.
Condensation problems in the roofspace
Manthorpe Building Products Ltd
Editorial on the causes of condensation issues in the roofspace and what to do to solve them.
Teesside University, Middlesbrough
Hardscape Products Ltd
Hardscape has provided modern landscaping materials and techniques for vibrant Teeside University new-build, The Curve. Working in partnership with leading multi-disciplinary Architects; Austin-Smith:Lord and contractors BAM and Cleveland Land Services Ltd, the company helped to form an iconic central focus in the heart of Middlesbrough.
Bespoke Development - Royston, Hertfordshire
BPD Building Product Design Ltd
The design of the house specified an airtight and thermal efficient solution to meet Building Regulations. The brief for DGTS was to provide a highly insulated (U-Values for walls/0.11 and floors/0.13) envelope to the main steel frame structure and concrete beam and block floors to both ground and first floor level. The dwelling floor area was approx 700m² broken up into twelve rooms including a wet room, gym, media room and library.
EUROSPAR, Ireland - Firetite Case Study
ECON Building Products – BASF Distributor
After considering various products, PABIA Consulting engineers chose FIRETITE as the ideal solution for upgrading the Newtown EUROSPAR building complex in Cobh, Co Cork. FIRETITE met the insulation requirements, fire regulations, and could be retrofitted externally with minimal disruption to tenants and customers.
Irvine Community Enterprise & Leisure Hub
Forterra Building Products
The initial phase of a large-scale regeneration project featuring community sports facilities, office accommodation and an Enterprise Hub in Irvine, North Ayrshire, has been constructed with the use of 50,000 Carsington Cream bricks produced by Forterra in Measham exclusively for Taylor Maxwell. The construction on Quarry Road, Irvine, houses the office headquarters of a local leisure company and work spaces for Business Gateway, who aim to support local entrepreneurs and business start-ups, encouraging local employment. It provides a gateway into the development that will include local indoor and outdoor sports facilities and multi-use community spaces. The building was designed to mark the development entrance, draw people into the site and set the construction standard for the phases to follow. Andrew Martin, Sales Executive at Taylor Maxwell, said: “We were tasked with finding a suitable facing brick for Irvine Community Hub. With a budget to adhere to and a remit to provide a buff/cream coloured brick with a traditional appearance, the Carsington Cream Facing Brick was ideal. “This brick type is part of a commitment to certain product lines manufactured in the UK and mainland Europe that Taylor Maxwell makes to provide a ‘Select’ range of brick types. This provided Clark Contracts with a commitment on price and availability for a soft mud manufactured brick with the technical qualities needed for the Scottish climate.” Steven Nicolson, Forterra’s Area Sales Manager for Scotland, said: “The Carsington Cream brick is a handmade, low water absorbency brick that was used here to combine with the modern aspect of the building and to complement the surrounding buildings.” Nick Shepherd, Architectural Assistant at Anderson Bell + Christie, said: “Forterra and Taylor Maxwell’s Carsington Cream brick was used to contrast with the residential context and establish the building as a landmark. The tone of the brick was selected to harmonise with the timber cladding, as well as the timber louvres within the window openings which accentuate the texture of the brick.” Forterra nominated the project for the 2018 Brick Awards, in the Public category.
Hardie® Panel - Aber Bay
James Hardie Building Products Ltd
James Hardie recently featured on a stunning leisure facility in the heart of Clarach Bay, Aberystwyth. In collaboration with Nick Carroll Architects, we were able to provide a unique Hardie® Panel solution to this project. Originally a competitor product was specified at nearly three times the cost of Hardie® Panel, the client chose to switch to James Hardie thanks to our cost effectiveness, A2 fire rating and providing a robust cladding solution.
Monoridge Project - Danbury, Essex
BPD Building Product Design Ltd
This historic property is being converted into luxury apartments and in the grounds of the palace some twenty six new houses are being constructed to be architecturally in keeping with the historic main building. Taking cues from the complex roof layout of the original palace, the new houses have numerous hips, valleys, box gutters, monoridges and even turrets. The increased levels of thermal insulation required within the roof space meant that the risk of condensation occurring out of sight in the loft voids increased dramatically.
Lead Roll Effect for New Build Development
Polyroof Products Ltd
The overall aesthetic appearance of this project was very important. Originally, traditional metal roofing was considered, but the client had reservations with possible noise issues and theft problems, and local planning constraints did not permit the use of traditional slate. So, Williams Roofing Contractors of Chandlers Ford were tasked in finding an alternative solution.Polyroof’s BBA approved 185 GRP System can replicate the look of metal sheeted roofing at a fraction of the weight and the price and, having no scrap value, is not prone to vandalism or theft.The contractor worked closely with the Polyroof Technical Department, the client, and the planners to produce a detailed specification for the project incorporating pre-formed trims to create a lead effect. The system was successfully installed within the project time frame and upon completion was given the usual insurance-backed 20 year guarantee from Polyroof Products Limited.Polyroof’s simulated metal finishes are achieved through the installation of Polyroof pre-formed GRP trims which are fixed to the deck or substrate prior to the application of the Polyroof waterproofing membrane. The project was nominated for the LRWA Roofing Awards due to the high level of intricate detailing that was undertaken and the care that was taken to ensure that all preformed profiles were fitted in balanced, parallel positions. The overall attention to detail by the Polyroof approved skilled operatives was first class.
Showing 73-108 of 192