"roofing membranes"

A flat roof in the state of Tyrol was used to rigorously test a new non-combustible inverted roof insulation solution for the UK market.

A stable conversion project needed an authentic clay roof finish.

The original factory finish to the metal roof of this property was failing, with the coating delaminating badly due to UV damage. The gutterless eaves construction meant that both the roofs and cladding had to be coated. Metalseal was specified because it is available in any RAL colour., In this case, Juniper Green was required. The original finish was removed with 4000psi pressure washers , before corrosion was treated with Liquasil's corrosion primer before Metalseal 20 was applied.

After first cleaning the roof and attending to rusted areas with Liquasil’s corrosion primer, it was the coated with Metalseal 20 from Liquasil, using airless spray equipment. The specification for this roof was for a special RAL colour. Only Liquasil can make silicone coatings in any RAL colour, so Metalseal 20 was specified for the project. This roof was completed in Forest Green.

Russell Roof Tiles supplied tiles to 3 social housing sites in Derby.

A large retirement village at Parkland Place in Bedfordshire required slate appearance roofs.

Skydoor Roof Access Rooflight Has Helped Open The Roof Space Of Beautiful Holiday Home Located In Michigan Case Study

Russell Roof Tiles supplied Bute tiles in Burnt Orange for a residential housing project in Hampshire.

A green roof system was selected for this project as the client required a roof that would complement and accommodate the step in levels to follow timber decking lines to the 55m² roof terrace areas. IKO Single Ply’s Spectraplan SM120 light grey single ply waterproofing system was overlaid to the existing roof and newly built sun rooms, ready to receive a green roof system.

About the projectIn the summer of 2016, Paterson Gordon Architecture were approached to renovate an existing steading that stood in a derelict state. However, the stunning views of Loch Lomond created an inspiring opportunity to design and build a modern family home.Which FAKRO products were used?This property required an increase of natural light for a dark space within the building which could not fulfil its highest potential. By specifying DMF-D U6 and DXF-D U6 flat roof windows, Paterson Gordon Architecture was able to deliver a substantial proportion of natural light into the central hallway. DMF - D U6 Manually-operated Flat Roof WindowManual opening flat roof windows.The type F window is equipped with an energy-efficient triple-glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC upstand is RAL 9010, the internal finish is RAL 9010 white PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.DXF-D U6 Non-opening Flat Roof WindowNon-opening flat roof window.The Type F Window is equipped with an energy-efficient triple glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC Upstand is RAL9010, the internal finish is RAL9010 White PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.The existing part of the barn specified conservation-style roof windows to suit the original roof openings. To meet this requirement, FAKRO conservation windows were specified and installed. The characteristic feature is a black vertical mullion bar down the middle of the window and its black cladding. Making it suitable for traditional construction. Most of FAKROs standard windows are available as a conservation window.Why were FAKRO products specified?Primarily, the appearance of the flat roof windows was behind the reason for choosing FAKRO, along with the diverse product range and the ability to install the windows onto zinc, slate, and single-ply membrane roofs.

The roof project in Bermondsey consisted of an accessible green roof for residents on the first floor and a green and brown roof at the next level. Natural Aggregate, 6mm Barley Beach. London

In a stunning architectural statement, CUPA PIZARRAS R17 slate has been specified to meet the design challenges of a former Georgian windmill renovation at Fort Green, near Aldeburgh in Suffolk. The first project of its kind in the UK, the natural slate was individually cut and fixed through expert craftsmanship to accommodate the building’s exterior curve while also providing crucial protection from the harsh coastal environment. Originally, the windmill walls were going to be clad in cedar shingles however, contractor ELC Roofing recommended using the rectangular CUPA R17 slate from CUPA PIZARRAS as a more weather-resistant alternative. ELC Roofing Owner, Edward Carlo, explains: “The R17 is a natural, non-carbonated blue-black slate with non-rusting metallic particles and thin laminations. From our perspective, it’s a tried and tested product that we specify and install on a lot of our projects – especially in coastal situations like this.” The slates, which protect against the salt water and wind, have been fitted on both the windmill’s curved wall, its pitched roof and elsewhere adding design details to the property’s walls. He goes on to say: “Aesthetically, the ocean environment has inspired the material choice with the slate mirroring the scales of a fish. This gives the windmill a dramatic architectural style; one that also sympathetically ties into the slate roof of the neighbouring cottage, which we replaced with CUPA R17 the previous year. “As far as I am aware, nothing like this windmill has been done in the UK. It was a case of starting from scratch to devise the optimum installation method, which involved a lot of detailed calculations.” For the tower, which has a 15m circumference at the base tapering to 11m at the top, the team initially removed the thick render on the windmill wall, taking it back to the original brickwork. Next, to meet the challenge of the curve and tapering of the wall, 50mm counter battens were fitted to the tower’s brickwork. Then, multiple strips of ply were cut and glued together to create the curve. These panels were screwed to the counter battens to provide an anchor for the fixing system. The ply was also primed to protect the surface from water ingress and a breathable membrane applied to protect the brickwork. In terms of fixing the slates to the panels, Edward said: “For a more corrosion and wind-resistant solution, I decided on the French technique of a stainless steel hook fixing system to install the slate, as opposed to nails.” Ensuring the layout worked exactly with the curves, the slate was lasered from top to bottom to perk it out, which took five days to do. Horizontal tiling battens were also marked to ensure the slates were fixed at the right height. Every single slate was cut and fixed individually to accommodate the curve and ensure they aligned with the building’s inset windows as well as other architectural details - a very precise process that required expert levels of craftsmanship. Preventing the slates from getting smaller at height, the team designed-in a series of lead bands that go all around the building at each storey level. These sit underneath the windows to create a consistent appearance visually. The windmill’s domed copper roof existed already and the adjoining tower, which is horizontally clad in a white weatherboard, features a slated pitched roof. ELC Roofing has again used CUPA PIZARRAS spanish slates. In this instance, the roof curves to the back end with four leaded hips to one end and two to the other with a connecting lead ridge. This time the slates were fitted to 20 x 50mm battens with a layer of permeable membrane. This part of the roof also features a striking onion-shaped finial. Expertly crafted by ELC Roofing, the finial is produced out of a patchwork of small pieces of soft copper, topped off with a fish that acts as a weather vane and includes stunning marble eyes. To the other side of the clad tower, CUPA PIZARRAS slate has been used to create a vertical square panel detail to the front of the building and fixed using the hook system again. Commenting on this challenging project, Edward said: “Work on site started before the first Covid-19 lockdown so as well as the challenging weather conditions that a coastal location like this presents, the team also had to complete the work with government guidance and restrictions in place. Regardless, the client is overwhelmed with the end result and so are we.” To find out more about the CUPA PIZARRAS range of natural slate visit: https://www.cupapizarras.com/uk/natural-slate-roofing/

The proprietors of this domestic property in Harrogate added a large extension with a total roof area of 150m2. The client wanted the new roof sections to complement the slate work and aesthetics of the original building whilst adding a contemporary and stylish look to the extension.Originally considering a zinc sheeted roofing system, the client explored alternative materials that could achieve the same visual impact but at lower cost. After discussions with Cure Roofing Ltd, a Polyroof simulated metal finish was proposed as a roofing solution that would meet all the client’s requirements.Not only do Polyroof’s range of liquids offer cost savings over traditional metals, but they are also lighter in weight, totally seamless and can be pigmented to any RAL colour. Having no scrap value, the client also had the added peace of mind that the roof would not be a target for theft.A timber warm roof was constructed which incorporated 120mm PIR insulation to achieve a U-Value of 0.18 W/m2K in compliance with building regulations. An OSB3 TG4 deck was fitted above the insulation and Polyroof pre-formed GRP standing seam trims were fixed at 600mm centres into the deck. Next, the first coat of the Protec waterproofing system was applied over the whole roof area and encapsulating the standing seam trims. The roof was finished with a second coat of Protec pigmented to RAL 7016 providing an anthracite grey colour to the whole roof, accurately simulating the appearance of zinc roof sheets.The workmanship by Polyroof approved contractor Cure Roofing was second to none and the quality of the finish left the client delighted with their new roof. With BBA approval, top-rated fire performance and Polyroof’s trusted 20 Year Accredited System Guarantee, the client has total peace of mind that their new extension could not be better protected for decades to come.

This project involved a brand new Starbucks drive-thru being built in West London where the customer wanted the overlooked rooftop to be green. The customer was able to give the basic dimensions to our team and describe how they wanted the roof laid out. We then calculated the exact quantity of units needed with our inhouse software and gave delivery and installation guidance to the contractor and end client. Wallbarn also supplied the materials for the semi-extensive border including geotextile fleece, drainage board and our specially-developed substrate for a comprehensive green roof solution,

This asbestos roof is being cleaned using a closed box pressure wash, with all waste water being filtered and recovered for re-use. Once cleaned, the roof is coated with the BBA Approved Asbestoseal system which includes: SWT CORROSION PRIMER - fully rust and wet tolerant, the primer is applied to all metal fixing to stop further corrosion. NON-SAG SEALER - is applied to all fixings and small holes and cracks to permanently seal them. ASBESTOSEAL 20 is brush applied to the roof sheets to provide a new finish.

Russell Roof Tiles supplied 26,000 Slate Grey Pennine tiles as part of a £36,000 contract for a total of 13 private homes in Falkirk.

ussell Roof Tiles is supplied our Natural Range Galloway and also the profiled Pennine tile to a total of 128 new build homes in Leicestershire.

Boughton’s Intensive green roof substrate has been successfully trialled in a ground-breaking analysis project at Coventry University assessing the feasibility of ‘greening’ landscapes with ecological beneficial habitats.  With the objective being to research the benefits and plausibility of incorporating green space and wildlife-friendly habitats into heavily built-up areas, Coventry University handpicked Boughton’s Intensive IN1 substrate based on its nutrient content, weight, and the inclusion of a water supply in chambers beneath the sub-base.The majority of green roofs in the UK fall into the ‘extensive’ category and are based on a low growing succulent, Sedum, which only requires a few centimetres of substrate to grow, whilst intensive green roofs provide a deeper soil depth and can support a more complex plant system. To this end, Coventry University wanted to explore the advantages of intensive green roofs, which offer greater biodiversity, often create accessible spaces, and offer the best insulation properties and storm water management. The organisation partnered with SEL Environmental, who provided its intelligent water management systems for the project.Boughton’s Intensive IN1 substrate boasts greater organic content than extensive substrates, meaning it supports larger plants and can be installed at greater depths, varying from 100-500cm. IN1 provides a stable growing medium for wide variety of plants in intensive green roof installations, including green roof lawns, shrubs and trees.Depending on the substrate depth and plant type, permanent irrigation systems (above or below ground) are sometimes installed with this substrate to as a backup for extended dry periods. They are not required for everyday irrigation, as the substrate has the ability to hold onto sufficient moisture during ambient conditions. The project, funded by Knowledge Transfer Partnership (KTP) and headed up by Sophie Barron-West, followed plant growth for four years from 2017, with a break due to Covid 19. Dr Stephen Coupe and Dr Liz Trenchard from the University’s Centre for Agroecology, Water and Resilience (CAWR) offered their research expertise.CAWR’s Dr Stephen Coupe says: “The technical requirements of Boughton IN1 were a big part of why we chose it. We also wanted the chance to get as many wildflowers in the space as possible. The nutrient levels were perfect because it wasn’t too rich. In fact, it was a ‘just right’ formulation that wasn’t going to overstimulate but would also deliver enough nutrients for what we needed. Ultimately it was going to be perfect for long-term sustainable plant growth.”He continues: “Reliability was another consideration because we knew we could get it delivered on site on time and, because of Boughton’s location in Kettering, we weren’t concerned about lead times, so that was a plus. It’s safe to say it was a studied choice.”Ground-breaking resultsAccording to the University, the trial resulted in ground-breaking analysis into how different types of green roofs can be created and maintained, as well as what their benefits would be alongside others in a built-up area.  The project successfully demonstrated the ecological impact of placing retrofit green roofs onto existing infrastructure, even with a focus on wildflower species and a relatively short development time. An independently-conducted ecological survey recorded five insect species that have national and local rarity value, including two species of bee that are deemed ‘nationally scarce’ and ‘nationally rare’. Of 457 preserved specimens taken on the green roofs at Coventry University, a total of 120 different insect species were recorded, including wasps, sawflies, hoverflies, beetles, and as many as 11 species of bee.  Coventry University’s findings revealed that the innovation in green roofs has improved and increased the total constructed habitat for rare insects. Research has also enabled better water management alongside habitat enhancement. This research has been incorporated into SEL’s product range, where green roofs are now used across four sites in Coventry, London, Aylesford and Blackburn. CAWR’s Dr Stephen Coupe said: “Ecology, biodiversity and wildlife are largely forgotten by planners, designers and builders in developments. Most green roofs installed in the UK are based on sedum, and, while there are additional features that can be added to these green roofs to improve biodiversity, they are rarely incorporated. Our findings, using Boughton’s Intensive green roof substrate, are that the retrofit of green roofs is feasible and, more than four years into development, IN1 has supported verifiably diverse green roofs. The plants on these roofs supported several insects that have rarity status in the UK, which is very positive.” Dr Coupe adds: “Whilst it is probable that substrates take many years to develop anything like the maturity comparable to natural soil, after just four years, IN1 went from having no recordable eukaryotes, to a concentration of organisms, including worms, soil mites and rotifers.”  Boughton Business Development Manager, Jason Lock comments: “Boughton was delighted to be part of this groundbreaking project and buoyed by such positive findings. Our products have been used successfully in a number of iconic green roof developments around the country over the years but it was a pleasure to be involved in such an important trial that would deliver verifiable results assessing the potential for green roofs to create new habitats in urban environments and enhancing local ecological diversity. Boughton offers an extensive range of green roof substrates and we welcome any research that helps further innovation around the application of green roofs.” The experiment at Coventry University is ongoing and the team are set to feed back again at the end of the summer about how prolonged dry weather has affected results. Dr Coupe says: “The beauty of this project is that there is no general timeline for a piece of green space. We need funding to support our ongoing investigations but there are options and opportunities for long-term research. It can last for the lifespan of the site and I think we will see really interesting developments. There is no reason why, over time, these green spaces would be indistinguishable from an existing habitat.” Boughton’s portfolio of green roof substrates are specifically engineered for different types of roof greening, both for domestic and commercial projects. A full product specification is available for each of Boughton’s Green Roof Substrates, and other landscaping products, making exact specification simple and straightforward. There’s also a section on each product listed online, titled ‘to specify (copy & paste)’, designed to make your job even easier. To enquire about your next project, contact Boughton by calling (01536) 510515 or email sales@boughton.co.uk.

The largest SolaGlide retractable glass roof in the UK is the talk of the town! Installed by Breezefree at The Hawk's Nest in London’s Shepherd’s Bush.Working with the team at Birdhouse London, we were presented with the challenge of transforming their outdoor space at The Hawk’s Nest into a flexible all-year space, whatever the weather. Challenges included satisfying the requirements of TfL due to the tube line running immediately above, as well as the venue’s request to have a space to trade in during construction work.The result is a chic hospitality space with a sliding roof that offers options for open airiness or full enclosure from the elements. The roof also offers significant soundproofing, reducing impact on neighbours on their most lively nights. The transformation means that the venue can offer their delicious cocktails, and pizzas that have to be tasted to be believed, underneath an elevated and stylish roof that will help draw diners and revellers for years to come.

Russell Roof Tiles supplied Taylor Wimpey with 180,000 Bute tiles, a thinner leading edge tile, in Burnt Orange for its Shopwykes Lakes development in Chichester.

Clapham ParkBauder Total Green Roof System (BTGRS) with BauderSOLAR G LIGHTSynopsisThe regeneration at Clapham Park involved the demolition of old housing stock to make way for new affordable homes. The 5-storey building with 21 dwellings incorporating the latest rooftop technology which blends a biodiverse green roof and unified solar PV array. This approach met the planning requirements and maximised the limited roof space to generate energy for the residents. The development was certified BREEAM ‘Outstanding’ due to its environmental, economic and social sustainability attributes.Bauder Building BoardProject:Clapham ParkLocation:Clapham Park, Lambeth, LondonRoof Area:500m² green roof layered with 116m² of PVSpecifier:PJMA Architects​Approved Contractor:EJ Roberts Ltd​PV Installer:M & M Electrical LtdThe specification The BauderSOLAR G LIGHT system has National House Building Control (NHBC) approval and meets local authority building control (LABC) requirements. The system was installed on zero falls roof deck, making it a very cost-effective solution.The biodiverse green roof which includes 35 plant species recognised by the RHS as Perfect for Pollinators, covers the totality of the roof area and offers a large variety of vegetation. The building reduces its carbon impact with the highly efficient PIR insulation and generates approximatively 10% of the flats usage with a maximum possible output of 75kWp from the 70 PV modules. The solar PV mounting units are ballasted by the substrate and vegetation, removing the need for any penetrating products in the waterproofing.Products appliedBauder Total Green Roof SystemThis system features a reinforced bituminous waterproofing system offering a service life expectancy in excess of 40 years.BauderSOLAR G LIGHTThe integration of a green roof and photovoltaics into one system drawing the maximum potential from a flat roof.BauderGREEN Flora Seed MixesA blend of 49 British native species seed, to maximise diversity of vegetation on green roofs.Project challengesOne of the major challenges of the project was the roof area, which at only 500m² needed to include a green roof and a renewable energy system to meet the main objectives of sustainability and energy efficiency of the development highlighted by the planning committee. The roof contributed towards requirements under National Planning Policy Framework (NPPF) Chapter 11: Conserving and enhancing the natural environment and The London Plan 2011 Policy 5.2 – Minimising Carbon Dioxide Emissions, Policy 5.3 – Sustainable Design and Construction and Policy 5.7 – Renewable Energy. The green roof is layered with a raised PV array so that the entire roof qualifies as a green roof whilst also providing energy generation.System installedBauder Total Green Roof System (BTGRS)1 BauderPLANT EA torch-applied, root resistant capping sheet. The product features chemically treated bitumen to deliver superior root resistance which has been tested and approved by the FLL. The membrane is reinforced with 250g/m² spunbond polyester fleece to allow the finished product to cope with structural movement without fracture.2 BauderTEC KSA DUOA self-adhesive bitumen underlayer with “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures. 3 BauderPIR FA-TEFlatboard insulation used on the lantern roof area to help meet its U-value of 0.15W/m²K. 4 BauderTEC KSD FBSA self-adhesive SBS elastomeric bitumen air & vapour control layer, with a mica finished upper surface to allow easy bonding of insulation using the specified Bauder insulation adhesive.

Russell Roof Tiles supplied Taylor Wimpey with 250,000 sustainable Bute tiles in Cottage Red, Slate Grey and Terracotta, for its Hamford Park development in Walton-on-the-Naze.

A DOFF steam cleaner was used to thoroughly clean the moss and lichen from this asbestos roof in Bridgwater. The metal fixings were treated with Liquasil's rust tolerant primer and then sealed, along with cracked sheets, using Non-Sag Sealer, before the whole roof was coated using Asbestoseal 20. The end result was a leak-free asbestos roof that will last for many more years. Asbestoseal is the only BBA Approved coating system for asbestos roofs.

Eastbourne station is located in East Sussex. It was originally built in the 19th century and is classified as a Grade II listed building. Over the years, the station has undergone several renovations and upgrades.Back in October 2020 it was announced £5 million would be spent on restoring Eastbourne Railway Station to its ‘former glory’. Work done includes canopy refurbishment, slate roof replacement, masonry work to the front of the station, and new roofing above the atrium.Twinfix were approached to replace the glazing panels on the 32 lanterns on the station’s train shed with something hard wearing, sustainable and modern but without losing the period look. The change was needed because, according to the plans, the existing fixtures were ‘life expired and inefficient’.Twinfix supplied their Multi-Link-Panel Non-Fragile (NF) roof glazing system, glazed with 6mm solid obscure polycarbonate. The new glazing spanned 1243 square metres and was installed by Gable, on behalf of Main Contractor BAM Nuttall.The Multi-Link-Panel NF system is an innovative roof glazing product that has been well utilised for many years on station canopy roofs, and it has been thoroughly tried and tested in that time.It was the chosen system for this project for a number of reasons:sustainability– these panels are virtually unbreakable in manufacture, transit and in situ, meaning that, unlike glass, maintenance costs will be eliminated. The system is also completely recycleable.safety– Twinfix Multi-Link-Panel NF (Non-Fragile) conforms to the HSE recommended test method ACR[M]001:2019 (as outlined in document HSG33) and achieves a ‘B’ Classification.off-site construction– The panels are pre-assembled in Twinfix’s factory ensuring strict quality guidelines are adhered to, which is not always guaranteed when roofing products are assembled on site.ease of access– The Multi-Link-Panel NF system can be fitted with In-Line Access Hatches, to allow cleaning of gutters and roof. These hatches are hardly visible and allow safe access through the glazing without needing to get on the roof.weight– The Multi-Link-Panel NF is light in weight and due to its modular format, it is very quick to install which allows for short rail possession works. A slight redesign of the original roof allowed 96 access hatches to be installed, making maintenance easier. Installed it’s almost impossible to detect the modern materials that have been used to bring this historic structure back to life.During the renovation work, Shaun King, Sussex route director for Network Rail, said, “The quality of work on site is being completed to a very high standard and we’re taking great care to restore the Grade II listed building to its former glory.”

Topseal PU was specified over numerous roofs on this hospital covering 1000's of metres. Topseal PU was chosen due to its BBA certification, high performance, 25 year guarantee, low odour together with the failed asphalt roofs and amount of plant on the roof it was the perfect product.

Flat roof waterproofing in the UK

Russell Roof Tiles supplied Keepmoat Homes with Highland, Grampian and Lothian tiles in Slate Grey, Anthracite, Cottage Red and Peat Brown, for its multi award-winning development, Spirit Quarters.

Specified because of it's unique BBA Approval and Latent Defects Insurance Guarantee, Asbestoseal was applied to this asbestos cement roof in Warwickshire. The roof was first steam cleaned using 150°c steam, removing all moss and lichen. Metal fixings were treated with Liquasil's corrosion primer and then sealed using Non-Sag Sealer. The entire roof surface was then coated with Asbestoseal 20 to provide long term protection and add considerably to the life of the roof. The metal gutters were lined with Liquasil's seamless silicone gutter lining system

Project:Downtown Doha is a multimillion-pound scheme to regenerate the Downtown Doha district. Surespan supplied a wide number of electrically operated glazed roof hatches along with solid top roof access hatches. Product:Sizes included a 3310 x 1120, 4320 x 1110, 3245 x 760, 1098 x 4330mm and the biggest size came in at 4462 x 6654mm. All the hatches were provided powder coated using the Interpon D series for enhanced durability. In addition, a variety of other products including wall & ceiling access panels were manufactured from Stainless steel. The largest panel was 2700 x 1600mm manufactured as a double door.

A stunning new ‘brown roof’ is the crowning glory for a private dwelling overlooking the River Tweed. The project has been designed to last 100 years and takes into account the requirements of future generations of the family. For the main flat roof area, Spectraplan TPE was chosen for it's green credentials and a brown roof system was laid on top .

Waterproofing of flat roofs in industrial areas in the UK

Delta Registered Installers, Premier Preservations, were approached to offer a waterproofing design and system to a basement, to ensure the vaults – located under the entire footprint of the property were protected from water ingress.

Commercial to residential, it may be last orders for some of our great British pubs, for other’s its discovering exciting ways of transforming commercial structures into luxury residential dwellings.  The growing trend of converting old inns offers new homes a unique history whilst being packed with character and features.Delta Registered Installers, Advance Property Preservation Ltd were engaged to assist on a troublesome vaulted basement to a property, based in central London which had already been converted into high living accommodation.Just off the basement area were two large vaults around 12m long. Made from brick barrel construction, this below ground space had previously used for storing kegs of ale!One of these vaults had previously been converted into a spa area with jacuzzi and steam room, the other was used as a storage area. The owners had previously had the storeroom tanked with a Type A, render system, however this approach repeatedly failed, allowing for substantial water ingress which was causing damage to items stored in this area.With Structural Waterproofing one of the major contributors to project failure lies with the design. When hiring contractors, ensure the design, procurement of materials and installation is undertaken by one specialist will naturally reduce these known and associated risks. A specialist contractor will always be able to offer quality assurances.

The brief of this project was to carry out a trial on a section of track (the Metropolitan Line) located close to Farringdon station to provide an elastic, permanent repair waterproofing solution which would not cause any detrimental effect to the structure nor the trains passing through it.

Delta Registered Installers, Oaks Damp Proofing having previously undertaken work for the client were commissioned to design and install a Cavity Drain Waterproofing system that would meet BS8102:2009 the British Standard for the protection of structures against water from the ground, Grade 3 (no dampness or water penetration acceptable) to the cellar area of The Blonde Hedgehog. The Cellar having been used historically to store beer was not waterproofed historically. Beer cellars are notable for being very cold and wet. For hundreds of years beer cellars were always underground – because underground rooms are generally quite cool.

Waterproofing design is a key and critical component for successful construction of below ground structures. Whether it’s a completely new build or making smaller changes to an existing property, waterproofing design should never be overlooked.Waterproofing might account for just a small fraction of a building’s total cost, but waterproofing defects can result in catastrophic consequences. When waterproofing fails, the implications are significant.Delta’s MD, Kevin Dodds was approached to offer advice and guidance on a failed waterproofing system.The existing structure had an impressive 5-level basement which houses: kitchens, food storage and food preparation areas, spa, plant rooms and accommodation. Near to a large river, the site sited well within the water table. The original waterproofing system was based on the secant piled walls and a block wall internally to provide a basic drained protection system with drainage holes at various points to drain to various levels.Over time, the third floor had become completely saturated with all levels of the basement experiencing water ingress in varying levels from damp patches to significant “jets” of water and flows of water through the secant piles.With remediation waterproofing design strategies, it may take some time to specify a suitable system. It is important that investigations are thoroughly carried out by individuals with the capability of diagnosing the defect, assessing the extent of that defect, and recommending a suitable corrective measure.