"resin based flooring"

To facilitiate their exciting BSc Paramedic Science course, the University of Surrey identified that they needed more practical training space for their students. By working alongside Scott Brownrigg Architects, Newton Specialist Contractor Advanced Basements, and the Newton Technical Team, an extensive existing undercroft was converted into three large, dry rooms that are ideal for the purpose.With an emphasis on practical elements, the exciting BSc Paramedic Science course at the University of Surrey needed a new, well-equipped training facility for its students at the Surrey Research Park, Guildford.Having identified a large existing undercroft for the purpose, the University consulted with Scott Brownrigg Architects, as well as the Newton Technical team and Advanced Basements in order to create a new, dry space.The extensive undercroft area was first separated into three large rooms, based on what each room was going to be used for. These were defined as:A live environment Paramedic Training room, with an existing concrete floor, concrete retaining walls, and blockwork internal wallsA storage area, requiring a new insulated floor, and with concrete retainng walls and blockwork internal wallsA plant room, requiring full internal waterproofing to the walls and floorConsidering that the existing structure was already quite robust, Newton and Advanced recommended an internal Type C Newton CDM System. This method of waterproofing is the most failsafe method, using membranes to capture the water, and sump chambers and pumps to collect and remove it. The pumps are also supported by a battery backup system for total security.Advanced Basements acted as the specialist waterproofing contractor and the waterproofing design specialist on this project, working alongside the architect and client to design the system, before providing a high quality installation.Furthermore, thanks to their early involvement, Advanced also took design liability for the project and guaranteed the installation for the client.

Our client GYM24 required a Multifunctional gym space with different areas being used for specific purposes. The brief was to include an area for free weights, an area for floor-based movements and sledge work and an area for resistance machines. The high expected usage of the gym areas meant the flooring had to be significantly resilient. Clear demarcation of specific areas was important to our client also, to create that high end professional feel.To achieve this, we recommended our Castleflex range of Fine Granulate Rubber Gym Tile (900kg/m3 500x500x50mm) with Ramp/Corner edges, 8mm puzzle mats, black with blue fleck (956x956x8mm) and the Artificial Grass (2x8m) Sprint track.Our 8mm Interlocking puzzle mats provide a seamless flooring solution, combined with the straight edge version a clear definition between areas was created. Toxicity tested and made to a high density of 1000kg/m3 for exceptional durability. This product is ideal for fitness applications.Our Fine Granulate Gym Tiles are manufactured with very fine recycled rubber granulate, this gives the tile a sharper surface finish and also makes them easier to keep clean when installed. Ramp edge versions of the Fine Granulate Gym Tiles were bonded down as a perimeter and the inner tiles loose laid in a brick bond formation for increased structural integrity. The thickness and density of the material offers substantial protection to the substrate and also provides acoustic protection.Our Artificial Grass Sprint track was bonded directly to a 40mm Fine Granulate Gym tile which was slightly thinner than the surrounding, to create a flush level finish with zero movement.All of our rubber gym products are easy to install and in this case all installation work was carried out by the client.

The ChallengeSituated in the Rye Lane conservation area in Peckham, South London, the four to seven storey mixed-use development in Rye Green – comprising 27 residential units laid out across six floors, with two retail units on the ground floor – would provide affordable housing for people in the community who are most in need.The scheme had to consider two elements, the first being the redevelopment of the frontage building (Rye Lane) with the retention of its façade, and the second being the six-storey (with set-back seven-storey) block to the rear, on the site of the existing fish warehouse.The SolutionThe architectural design of this residential development incorporates traditional and modern features with an existing brick façade.PROJECT INFOPRODUCT DETAILThe seven-storey block is rectangular in form and has been built with a striking yellow facingbrick with protruding red brick paneling. The contrast between red and yellow brickwork is exaggerated with the introduction of green glaze facing brickwork at street level. This change in texture and brick finish works well with the local vernacular.The new second and third floor additions are set back from the retained frontage.The design is simple and functional, and the specified fabric responds to the historic character of the conservation area.Three facing bricks from Butterley Brick were selected for the build. Arden Special Reserve, a red, light textured brick, and buff Village Harvest Multi – also light textured – were used as the facing material for the main body of the buildings. Wilncote Blue Smooth, a dark toned brick. was used to define the base of the buildings. The set-back top floor of the seven-storey block is clad in zinc shingles to reflect its roof-like character.The BenefitsThe high quality development, together with its associated external landscaping, has contributed positively to its place in Peckham.Butterley Brick offers a range of high quality facing bricks manufactured from locally sourced raw materials; the range carries BES 6001 Responsible Sourcing certification. The bricks contribute to thermal mass and can be recycled at the end of their use.

See how Evo Pro Artificial Turf brightens up the playground for a Manchester based school

Tiles used: 2002 - Light grey base/ green medium chip Terrazzo Tiles worktop

Sheffield based Case Study using the AliDeck Balcony Kit, featuring the Vertical Infill Balustrades

In 2012 the town of Walsall underwent a major regeneration. The Waterfront North site was developed and was based on 2.2 acres of brownfield land, where more than 300 homes and apartments, as well as a Premier Inn hotel were to be constructed. RCM were appointed by Whitbread to provide Y-wall, an advanced flexible calcium, silicate based fibre cement building board, for the construction of the Premier Inn. This was to be used as an external sheathing board, covering the structural steel frame, infilled with SFS steel.

Based at the heart of the Queen Elizabeth Olympic Park, London's new academic and research centre is bustling with life.

A single storey timber frame house, based on Passivhaus principals with specialised wheelchair access, situated in Fife, Scotland.

Client: Matthew AlgieLocation: Glasgow, Scotland, UKYear: 2023Project size: 300 m²Vebro systems: vebrocrete MFA high performance PU concrete flooring system was required to deliver a hygienic, durable, easy-to-clean flooring solution for a Glasgow-based coffee roastery.Matthew Algie, established in 1864, began life selling its own blend of tea to wholesale customers across Glasgow, before beginning coffee production after the second world war.Today, the Scottish company supplies its famous coffee blends as well as other peripheral goods and equipment to cafés, restaurants and hotels throughout the UK and beyond.Matthew Algie’s award-winning Glasgow roastery is in the heart of the city and close to the banks of the River Clyde.The slab in the facility’s production facility was in need of some attention, requiring mechanical preparation and exposed repairs before being overcoated.vebrocrete MF was chosen to transform the 300 m2 area. vebrocrete MF is a HACCP International certified medium duty, easily-applied, polyurethane concrete screed offering excellent chemical and wear resistance.vebrocrete MF is best suited to use in dry and semi-wet food processing and preparation areas subject to moderate temperature swings, chemical spillage and medium duty traffic.The system, which is resistant to temperatures up to 70ºC, also provides excellent cleanability and features a seamless hygienic finish.The food-safe, solvent-free, odourless, non-tainting and non-dusting system complies with HACCP food safety management guidelines.

System Used - TerraSmart pedestal IGNOThe Botanist is a botanical cocktail bar in the heart of Newcastle. Complete with a rooftop terrace bar, it entices revellers and partygoers with a welcoming and curated look. The natural materials of the terrace bar, mixed with the abundance of plants and natural light, transport customers to a chic, far-off watering hole. To complement and contrast the natural materials in the industrial setting, the bare materials, exposed brick, and stone effect tiles give a suggestive canvas to the biophilic decor. The design function of the terrace is as a high foot traffic area for social meetings. To fully support the paved area in these situations, we have seen a rise in users looking for simple pedestal systems that still provide a robust substructure at an economical rate. The pedestals have a wide base acting as a stable foundation and spacer tabs that equally space the pavers apart to create drainage channels.Sasso porcelain tiles could support the primary use of the space due to their inherent properties. These porcelain paving tiles are naturally non-porous, protecting the finish from staining. This non-porous property also makes the tiles resistant to bitumen and algae. The tile also features a low slip potential in both; wet and dry conditions. Having these properties within a hospitality environment can help make a safe and long-lasting flooring surface.TerraSmart Pedestal IGNO fits into this industrial, chic environment with its simple, robust pedestal structure and hard-wearing but stylish flooring finish, punctuating the space and tying the terrace together. 

Surespan designed and manufactured multiple recessed floor access hatches, for the construction of the Halley VI British Antarctic Research Station.Products suppliedSurespan design and manufactured a total of 27 HIAC Recessed Floor Hatches. These hatches provide the access an escape requirement for the structure and are located throughout the research station.We supplied;12no HIAC DL/FR30 1180 x 10707no HIAC DL /FR30 1180 x 10703no HIAC 800 Diameter FR304no HIAC 750 x 750 Lift Out FR601no. HIAC 1000 x 1000 FR30 The Features:The hatches supplied feature a fire rating of between 30-60 minutes and radius corners instead of the standard square corners. The projectThe £22 million unique and innovative research station was designed by Faber Maunsell and Hugh Broughton Architects, and built by Matlock-based Morrison Construction.Objectives;Minimize the environmental footprint of the station.Provide a safe, comfortable, and stimulating environment to live in.To be able to be fully relocatable inland.To allow the station to climb above the annually rising snow levels. The research station comprises seven interlinked modules on hydraulic legs fitted with skis, enabling the units to be towed into new positions. The blue modules contain bedrooms, laboratories, and office areas. The red module features a brightly lit, double-height space that is used for social activities.Halley Vi is the world’s first re-locatable and award-winning research facility providing scientists with state-of-the-art laboratories and living accommodation.

Altro kitchen system provides a perfect fitAltro Whiterock White, Altro Stronghold 30“We chose Altro Whiterock because it provides an easy to maintain, hygienic surface that is ideal for kitchens and have up to date fire certification.”Ben Rodgers,Cladpro LtdIssueBannold are one of the UKs largest independent family run suppliers of natural hard landscaping materials. Based in Cambridgeshire, Bannold wanted to refurbish 1920 railway carriages to create a tea room for customers.The Carriage Tea Room had a dated wooden substrate that needed to be replaced with a modern hygienic clinical finish for the kitchen facilities. The walls were not a square flat surface and needed a flexible product that could be fitted into the space. Floors and walls had to be easy to clean and maintain and fit into an environment without a straight line.ApproachCladpro are leading Altro Whiterock Premier installers specialising in hygienic wall finishes, floor coverings and ceilings. They suggested the Altro kitchen solution for the kitchen carriage. All the walls were thermoformed and wrapped to fit the unusual shape of the carriage.SolutionAltro Stronghold 30 keeps staff safe, with Altro’s highest slip-resistant rating of (PTV 55, R12) even with common kitchen contaminants such as grease, oil and flour. With 3mm comfort underfoot and 10dB impact sound insulation, it makes busy and noisy kitchen environments more comfortable for staff. Combined with Altro Whiterock it creates a full sealed solution to maintain the highest levels of safety and hygiene.

A combination of external wall insulation and resin brick slips from Sto has helped create a thermally-efficient and visually striking appearance for a £7.8m residential refurbishment project in London. Located on the Stockwell Park estate, Tyler House now benefits from the use of Sto resin brick slips which have been installed as the final façade finish, onto the company’s StoTherm Mineral K external wall insulation system. The Tyler House building is organised around a central courtyard, and houses 48 flats with one, two, three or four bedrooms. “The buildings underwent a significant amount of refurbishment in order to improve the living conditions of the residents, and providing effective thermal insulation was a key element in that process,” explains Richard Watson of project architects Rock Townsend. “The Sto solution allowed us to provide that insulation. We also wanted to add 13 additional flats and the Sto brick slips gave us the opportunity to create a dramatic new appearance for the existing parts of the building which would contrast with the rooftop extension.” The Sto materials were installed by Sto applicator Regency Plastering of Dartford. “The residents remained in their homes throughout, and there were no problems in installing the external insulation and brick slips whilst they were there,” explains Regency’s Paul Brown. The BBA-certified StoTherm Mineral K insulation system is ideal for refurbishment projects such as Tyler House. Its external installation means that insulation performance can be substantially upgraded without the loss of any living space inside the premises. Comprising mineral-fibre boards which deliver high thermal performance and unrivalled fire protection, the system also incorporates reinforcing layers to provide additional impact resistance. For this project the insulation was installed using StoLevell Uni adhesive and supplementary fixings to create a strong and reliable bond with the substrate. Designed specifically for use with Sto’s external wall insulation systems and StoRend systems, the Sto mineral brick slips used on Tyler House are manufactured from a rugged and durable synthetic render, and combine a realistic simulated brick appearance with reliable, weatherproof properties. They can be used to match the appearance of surrounding buildings without compromising on thermal insulation, or as in this case, to create dramatic and individual facades. For Tyler House they were specified in a white brick slip colour which contrasts with the new, rooftop extension. 

Basildon & Thurrock University HospitalBauder Total Roof System (BTRS) and LiquiTEC cold applied waterproofing systemSynopsisBasildon and Thurrock University Hospital’s existing roof was failing in multiple areas, and 80 rooflights needed replacing. The client wanted the refurbishment to make as little impact as possible on the departments directly below which included drug refrigeration, x-ray and ultrasound clinics, patient wards and operating theatres.Bauder Building BoardProject:Basildon & Thurrock University HospitalLocation:EssexProject Type:RefurbishmentRoof Area:900m²Specifier:NHSApproved Contractor:Breyer ConstructionProject challengesThe plant on the rooftop could not be turned off or raised and many of the AC units and boilers had to be left running due to the nature of the rooms below. Certain areas had to be repaired before others and detailing under and around the plant that could not be raised was almost an impossible task. When working around the plant, COSHH regulations had to be considered and adhered to.The result Coordinating with both the client and approved contractors was key in this project, and by using cold liquid applied waterproofing the contractors could ensure a watertight seal with quick application, allowing them to complete the remainder of the roof using reinforced bitumen membrane, and meet the tight project deadline of 12 weeks.System installedBauder Total Roof System (BTRS)Suitable for a variety of applications on both new build and refurbishment projects and can be used in warm, cold and inverted roof scenarios.1 Bauder K5KA top quality, heavy duty, torch-applied SBS elastomeric bitumen capping sheet. The product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.2 BauderTEC KSA DUO 35A 3mm thick technically advanced self-adhesive elastomeric bitumen underlayer with DUO lap technology and glass lattice reinforcement.3 BauderPIR FA G16 Tapered (laid to falls)Tapered insulation is a lightweight, convenient, easy to install and cost-effective alternative method of providing falls to a roof instead of incorporating them into the structure.4 BauderTEC KSD FBSA technically advanced, self-adhesive SBS elastomeric bitumen air & vapour control layer, with a mica finished upper surface to allow easy bonding of insulation using the specified Bauder insulation adhesive.LiquiTEC Roof SystemThe Bauder LiquiTEC roof systems combine ease of application, fast cure and durability to provide a cold applied liquid waterproofing product second to none.1 LiquiDEK with reinforcement layerA cold applied liquid fast curing waterproofing resin, for use on the main roof area of the LiquiTEC Roof System. It is applied in 2 coats ‘wet-on-wet’, with a layer of Bauder 110g reinforcement fleece between them. The product is a PMMA based resin and requires the addition of catalyst to trigger curing. It is solvent, isocyanate and halogen free, minimizing its environmental impact.2 BauderTEC KSD DUOCarrier membrane & Vapour Barrier is a technically advanced self-adhesive elastomeric bitumen vapour barrier with patented “DUO” lap technology. The product features an aluminium foil facing for vapour impermeability.AdvocacyBreyer Roofing’s Contracts Manager for the project, Kerry Cutts:“The main challenge was working around the hospital’s requirements. For example, we provided a weekly plan for the areas we were working in and the rooflights / plant affected. Where possible, we worked out of hours while doing rooflight replacements to minimise any issues. We also worked closely with Bauder to vary the specification when we had to work around live plant. The communication between Bauder and Breyer Roofing was exemplary throughout and I was pleased this completed project was nominated for a national award."

London-based architect, WHAT_Architecture has specified CUPA PIZARRAS’ CUPACLAD 101 Logic as the ideal rainscreen cladding system for a new and unusual housing block in Peckham. Crucial to this decision was the system’s ease of installation and its natural aesthetic, which helped the contemporary design to also complement the surrounding and traditional urban landscape. We chose the CUPACLAD 101 Logic as its design layout also reflects that of the brick base, without actually using brick,” said Diana Kulacka, Project Architect from WHAT_Architecture.

The challengeThe building housed old conventional hand dryers which hardly dried the hands and were very energy hungry. The requirement was that new units dried the hands quickly enough, but also were energy efficient. “They make the place more hygienic and people are less inclined to use toilet roll.” Jonathan Newey - Centre Director, St Werburghs Community AssociationAbout St Werburghs CentreBased in St Werburghs in East-Central Bristol, they serve the local communities and communities of interest across the city. Managed by the St Werburghs Community Association, it aims to provide accessible and affordable meeting rooms and facilities for individuals, community groups and voluntary organisations. Rooms are offered within its characterful Victorian building or contemporary and eco-friendly Annexe.The solutionThe Ecoforce hand dryer can run at just 500W and still provide a dry time that satisfies all user expectations. A low noise hand dryer suitable for all demographicsModel: Dryflow EcoforceDry time range: 20 – 25 secondsRated power: 500W – 1250W (On/Off heater switch)Guarantee length: 3 yearsThe resultsEstimated annual cost to use old hand dryers: £180 (based on 12p per kW/h) Estimated annual cost to use new hand dryers: £18.90 - £47.25 (based on 12p per kW/h)Annual cost savings: £132.75 - £161.10Estimated annual old hand dryer carbon production: 810 Kg/CO2 (based on 1kW = 0.54 kg/CO2) Estimated annual new hand dryer carbon production: 85 – 212.63 Kg/CO2 (based on 1kW = 0.54 kg/CO2)Annual carbon savings: 597.37 – 725 Kg/CO2Estimated return on investment period:Payback period: approx. 3.9 – 4.7 years

A Gloucestershire based independent care provider has recently completed a 46 bed extension on their care home for clients with dementia and nursing care requirements. Having worked with the contractor on a similar project, Astor Bannerman were recommended to the company to supply ceiling track hoists in an effort to future proof the needs of the home. With floor space at a premium, the company wanted to move away from the traditional style mobile hoists, which need to be stored away when not in use. Also, as using a ceiling hoist system normally only requires one carer to operate, this enables the company to adapt to the possible implications of Brexit on staffing levels.During the installation, we successfully added an XY (H-frame) hoist system into 3 assisted bathrooms and added 3m straight track OT200 hoists in 6 bedrooms allowing simple transfer in an out of bed.Fixings were also installed during the main build in the remaining 40 bedrooms, enabling the care provider to retrofit track and hoists as and when they require them at any point in the future.

Take a look at the various systems on display at our showroom based in Clerkenwell, London - including a range of both solid and glass partitions.

Take a look at the various systems on display at our showroom based in Clerkenwell, London - including a range of both solid and glass partitions.

Formally known as the Olympic stadium, this structure was constructed in the Stratford district of London for the London 2012 Olympics. After the Olympics, redevelopment of the stadium began, including installation of the new floodlights in March 2015. The 60,000 capacity stadium is now home of West Ham United.The project involved working with 2 different clients on the same project – Populous (Global stadium developers) and Buro Happold (consulting engineers) for 14 no lighting puddles for the London stadium. The driver for the use of composites was seeking a way to reduce the weight at the end of what was then the largest cantilever roof section – so weight at the end was more critical than normal. We also supplied 2000m² of steel gratings to the same project – demonstrating how we can identify the most suitable material for each application.The material used was Flowdeck solid top 41mm deep in RAL 7043. Flowdeck is resin moulded with a 3mm thick applied plate on top of a 38mm thick standard panel. It was fabricated at our facility in Middlesbrough with each one delivered on a phase-by-phase basis to a tight programme.

The 760,000 sq ft development will bring the Old War Office back into use, creating a world class 5-star hotel and 85 apartments. Works will include developing a six storey basement and constructing a three storey roof extension. The venue has been designed by UK-based EPR Architects, with the hotel interiors designed by New York-based designer Thierry Despont, and the residences by 1508 London. A1 Fire Rated Breather and Vapour FR Membranes were used to protect the insulation and building interior, maximizing its energy efficiency and value.

The Snooty Fox is a cafe based in Guildford that required a complete refurbishment to its outdated toilets, whilst also being practical and easy to maintain.

F. Ball and Co. Ltd.’s newest high-performance water-mix smoothing underlayment, Stopgap 1500 AquaPro, has been used alongside the company’s Styccobond F46 pressure sensitive vinyl adhesive to provide a time-saving solution for installing floorcoverings in Derbyshire’s largest hospital.Derbyshire Flooring Contractors installed an eye-catching bespoke vinyl flooring design in the waiting area and connecting corridors of the children’s outpatient ward at Royal Derby Hospital, a total area of 800m2.The floors in the ward required refurbishing as the old floorcoverings had become worn. Work needed to be carried out in the evening, in stages, so that it would not interfere with the day-to-day running of the ward. Requiring a time-saving solution, contractors opted to use Stopgap 1500 AquaPro water-mix smoothing underlayment, avoiding the need to remove old adhesive residues.Stopgap 1500 AquaPro uses the latest technology to offer a water-mix smoothing underlayment that can be applied over old adhesive residues, including bitumen, carpet tile tackifiers and ceramic tile adhesives. In such applications, there is no need to prime beforehand, saving further time and expense. Fast-setting and fast-drying, it is walk-on hard in as little as 60 minutes after application and ready to receive floorcoverings from just four hours.Work began with the labour-intensive task of uplifting old floorcoverings. Stopgap 1500 AquaPro was then applied at a thickness of 3mm over the subfloors to create a perfectly smooth base for new floorcoverings.A bespoke two-tone design, resembling a river running through the children’s ward with ‘islands’ of colour either side, was created by cutting shapes from two different colours of Polyflor Classic Mystique PUR vinyl sheet flooring, with the pieces adhered using Styccobond F46 pressure sensitive adhesive.Styccobond F46 provides instant grab, preventing floorcoverings from sliding when placed, helping with the creation of designs and patterns. The adhesive is also formulated to minimise the incidence of trowel serrations showing through thin vinyl flooring potentially affecting the finished appearance of installations.Commenting on the project, Mark Grant, Managing Director at Derbyshire Flooring Contractors, said: “We like using F. Ball products – they’re really good quality and reliable. Also, their tech reps are always available, if needed, to provide advice on products to use and procedures to follow throughout a project, from start to finish, including keeping us up-to-date with the latest technology that can help us achieve optimum results efficiently. That’s how I found out about Stopgap 1500 AquaPro, which saved us a lot of time outside of normal working hours and enabled us to complete the work while the ward wasn’t in use, minimising disruption to services.”

Products from F. Ball and Co. Ltd.’s System LVT range, including the company’s fast-track, fibre-reinforced transitional adhesive, Styccobond F58 PLUS, have been used to install luxury vinyl tiles in an ambitious, modern self-build property in rural Cambridgeshire.Flooring contractors began by thoroughly vacuuming the building’s concrete subfloor to remove dust and debris. F. Ball’s technical service team recommended treating the subfloor as a newly installed screed for the purposes of moisture management, despite being installed months earlier, as it had been left exposed to the elements since. Therefore, Stopgap F77 waterproof surface membrane was used to create a barrier to prevent excess subfloor moisture attacking adhesives and floorcoverings, potentially causing floor failure.Once the waterproof surface membrane had cured, the surface was primed using Stopgap P141. Stopgap 300 HD heavy-duty levelling compound was then applied over the entire ground floor to create a perfectly smooth base for the receipt of floorcoverings. The product’s high compressive strength and excellent self-levelling properties help create a flawless finish when installing LVTs, while ensuring a long-lasting, aesthetically pleasing floor finish even when subject to high levels of wear.The contractors then used Styccobond F58 PLUS and Styccobond F49 Hybrid PS temperature tolerant, moisture resistant, pressure sensitive adhesive to install wood-effect LVTs over the 372m2 area. Styccobond F49 was used where floor-to-ceiling windows were likely to cause temperatures to rise significantly as a result of solar gain.Styccobond F58 PLUS was used to install vinyl tiles everywhere else. The fast-track adhesive enables floorcoverings to be installed from as little as five minutes after application, transitioning from a wet-lay adhesive to become fully pressure sensitive. Reinforcing fibres in the formulation provide resistance to lateral movement, holding tiles firmly in place and reducing the potential for them to slide around when working. The adhesive’s high bond strength and strong initial tack also prevent excess adhesive oozing between joints, facilitating easier application.All of the products used in this installation feature in the F. Ball System LVT range: subfloor preparation products and adhesives which, used in combination, can help achieve optimum results when installing LVTs.Commenting on the project, Richard Argyle of 4 Floor Fittings, said: “It’s the best screed I’ve ever done. The levelling compound had no imperfections whatsoever. Styccobond F58 PLUS allowed floorcoverings to be installed over large areas in one go while helping with the precise alignment of LVTs. The result is a visually striking finish in keeping with the rest of the project.”

In providing changing facilities for both production and warehouse employees, Stadco’s personal locker system, based on two per employee, was no longer fit for purpose.

The Grange University Hospital based in Cwmbran, Wales was originally known as the Specialist Critical Care Centre, is a newly built modern and compliant healthcare institution.

The unrivalled durability of Johnstone’s Trade’s Endura Super Durable Matt has been put through its paces at the £27 million Trinity Academy in Halifax.With thousands of pupils attending the school, the need for a paint that would withstand the rigours of heavy traffic was paramount so Johnstone’s Endura Super Durable Matt was duly specified for its outstanding durability and aesthetic properties. Johnstone’s Water-Based Aqua Gloss system was used for the interior woodwork throughout the Academy after becoming the natural successor to solvent-based trim paints, which have been impacted by legislation in recent years.

A Midlands-based housing association turned to Crown Trade Fastflow to deliver a splash of colour, with a low odour application and fast-drying times for the comfort and convenience of residents. Lyng Community Association, a not-for-profit organisation, brought in Crown Paints to specify the pioneering water-based system for the redecoration of corridors in three blocks of flats in West Bromwich. Doors, window sills and skirting boards were decorated with Crown Trade Fastflow Quick Dry Gloss, over Crown Trade Fastflow Quick Dry Primer Undercoat. The work was carried out by Hankinson Painting Contractors from their West Bromwich site.

Secreted within the grounds of a Victorian villa these 2 new Mews properties and 3 new Townhouses replaces demolished 1980’s office facilities. A strong masonry base envelopes a timber clearstory and gables, aluminium dormers and a Zintek Mediterranean Blue zinc roof, to give a truly contemporary interpretation of a traditional mews building. The Townhouses are formed with complex twisted geometries. As with the adjacent mews, materials were selected incorporating a solid masonry base, timber cladding to the projecting cantilevered boxes, aluminium glazing systems, white render and topped with blue zinc mono-pitched roofs.