"pipes joint types"
3,127 results found
Relevance
Showing 1-36 of 754
Type 100SE and Type G100 Combination - QEII Centre
Movawall Systems Ltd
Movawall Systems Ltd have recently worked closely with the team at the QEII Conference Centre in Westminster to launch five completely refurbished spaces with both Type 100SE and Type G100 walls.
Type 100SE and Type G100 Combination - QEII Centre
London Wall Design Ltd
London Wall have recently worked closely with the team at the QEII Conference Centre in Westminster to launch five completely refurbished spaces with both Type 100SE and Type G100 walls.
Type G100 and Type 100SE Combination - Taunton School
Movawall Systems Ltd
Based in Somerset, Taunton School was founded all the way back in 1847. While the building’s stunning exterior has been immaculately preserved in the years since, the interior has of course been routinely upgraded during that time in order to support the ever-evolving demands of educational environments – including the recent installation of our Type G100 movable wall system.Type G100 is a glazed partition system that provides effective protection again sound transfer when fully closed, achieving up to Rw 54dB. This particular system is comprised of 10 panels, with half being glass and the other half sporting a solid matte black finish – all housed within a sleek black painted aluminium frame.Thanks to the Type G100, the school’s cafeteria layout can changed within minutes, offering the choice between a large open plan space, or a pair of smaller rooms. A fully solid system would not allow for the transfer of natural light to the smaller of the two spaces created when the system is in use, however the glazed panels mean this is not an issue. A pass door also allows for access between the smaller spaces when the panels are being used.
Type 100SE and Type G100 Combination - Taunton School
London Wall Design Ltd
Based in Somerset, Taunton School was founded all the way back in 1847. While the building’s stunning exterior has been immaculately preserved in the years since, the interior has of course been routinely upgraded during that time in order to support the ever-evolving demands of educational environments – including the recent installation of our Type G100 movable wall system.Type G100 is a glazed partition system that provides effective protection again sound transfer when fully closed, achieving up to Rw 54dB. This particular system is comprised of 10 panels, with half being glass and the other half sporting a solid matte black finish – all housed within a sleek black painted aluminium frame.Thanks to the Type G100, the school’s cafeteria layout can changed within minutes, offering the choice between a large open plan space, or a pair of smaller rooms. A fully solid system would not allow for the transfer of natural light to the smaller of the two spaces created when the system is in use, however the glazed panels mean this is not an issue. A pass door also allows for access between the smaller spaces when the panels are being used.
Pendock metal pipe boxing covers and protects pipework
Pendock
When concealing external pipework, building services and utilities associated with low carbon district heating schemes or air-source and ground-source heat pumps, Pendock metal pipe boxing range provides effective protection against accidental damage while helping improve project aesthetics.Bespoke manufactured to the individual project specifications from 2mm aluminium, as standard, metal boxing is available in two styles. CHM is a three-sided channel profile, for securing to a single flat surface, while the MXM is a two-sided 90-degree design for fixing to adjacent surfaces, such as walls and ceilings.Both profiles are available with two fixing options for increased versatility – EFF profiles have an integrated external flange on each edge, enabling them to be readily secured with suitable fasteners, while IFA profiles are designed to be installed using separate, concealed fixing angles and fasteners.CHM and MXM profiles are also used to conceal fire sprinkler supply pipework mounted in open balconies, or externally to flats, to provide added security and weather resistance. In addition, as metal boxing is non-combustible, it is used in high rise residential blocks to conceal interior sprinkler pipework where no sprinkler heads are present, such as communal areas.Usually supplied with a PPC finish, which can be selected from any RAL colour to blend in or contrast with the surroundings, Pendock’s metal boxing profiles are available in lengths of up to 4.0 metres, as standard. Other lengths and material thicknesses are available on request, as well as options to include perforations and hinged access hatches.A range of dedicated accessories is included within the CHM and MXM metal boxing range, which includes internal and external corners, stop ends and joint covers, as well as fixing angles, access panels and TEK fixings, which can be colour coded if required.Pendock metal boxing is part the extensive Profiles range of pipe boxing and casings, which includes pre-formed plywood pipe and fire sprinkler boxing, as well as boiler pipe casings. A range of technical information is available online including PDF and DWG drawings as well as NBS specification clauses.
Emseal DSM System used to seal wide deck joints in Meggit Avionics new Car Park in Fareham, Hampshire
NCC – Emseal Movement Joints
Client: Meggit Avionics, Fareham Design & Build Contractor: Metpark Specialist Contractor: Thelwell Flooring Main Products Used: Emseal DSM SystemMeggit Avionics produce flight data sensors, systems and displays for all types of civil and military aircraft, including helicopters and unmanned aerial systems (UAS) drones. At the firm’s expanding facilities in Fareham, their success meant that they needed to find a way to provide more parking for the growing number of people working on the site. The solution was provided by Metpark UK, in a complete car park design and build contract, that provided a whole new parking level, raised and built directly above their existing surface car park, which added a further 63 parking spaces. This included a new structural steel frame, with steel access stairs, perimeter crash barriers, and lighting, plus composite steel and concrete decks with waterproof deck surfacing. The structural design used 40mm wide expansion joints brought right through the composite deck to allow the anticipated high joint movement capability required, which was up to +/- 50% (i.e. total 100%). The Emseal DSM system was selected and used to securely seal the exposed expansion joints as it can easily meet and accommodate all these requirements. Emshield DSM is a prefabricated movement joint that is easily installed from above, so other trades can continue uninterrupted below. Additionally it is bonded into position with a structural epoxy adhesive, so there is no potentially damaging drilling required into otherwise sound concrete elements of the new decks.
Emseal Colorseal seals joints between precast façade panels at the Broadway Redevelopment In London
NCC – Emseal Movement Joints
Client: Northacre Consultant: Vinci Technology Centre Main Contractor: Multiplex Main Product Used: Emseal ColorsealThe development of The Broadway creates six buildings on a plan designed to frame views of the Grade-1 listed 55 Broadway across from Victoria Street in Westminster, providing residential, office and retail workspace and a new public space linking Victoria Street with Broadway and Dacre Street. The new building elevations were specifically designed “to reference the local vernacular in the rhythm of facades”, using materials sympathetic to the traditional sandstone and brick of the adjacent historic Conservation Area. The façades and their constituent precast panels were therefore a critical element in the design and construction process, as was ensuring that the joints between them could safely accommodate the anticipated thermal and any other structural movements, whilst always maintaining a watertight seal. This was further complicated by the façade design and necessary construction tolerances, meaning that the joints varied in width, resulting in high joint movement capability demands. A test programme was established with Vinci Testing Houses to determine the most suitable joint solution available to meet these challenges in detail - and the clear winner was Emseal Colorseal. This is a unique, preformed, double-sided, silicone-faced movement joint sealing system, that is bonded in position without invasive metal anchoring. Colorseal is CE-marked and ETA-certified to provide a watertight seal with 100% joint movement capability, thermal insulation, UV stability, and colour coordination with vertical or horizontal substrates.
Emseal BEJS used to repair and reseal the deck joints on Whitton Park Road Bridge
NCC – Emseal Movement Joints
Client: Durham County Council Main Contractor/Manufacturer: Retro Bridge Specialist Contractor: St Astier Consulting Contractors Main Products Used: Emseal BEJS SystemThe Witton Park Road Bridge near Bishop Auckland crosses the River Wear at the same place as the historic Witton Park Railway Viaduct, but at different angles. The main central bridging structure was being replaced as the old structure had deteriorated and become structurally unsound. The new prefabricated replacement section of the bridge is a Retro Beam Bridge design, made from thermally galvanised steel for long term durability and is 64 metres long, with a single-lane road carriageway plus a cycle path. The new bridge section was installed in just 3 days through the Victorian brick arches of the Viaduct by Retro Bridge. Then the teams from Durham County Council and St. Astier Consulting Contractors were able to work on the bridge deck expansion joints at each end, to ensure that these had an equally durable, watertight seal. To do this quickly and efficiently, as well as ensuring the long-term durability of the exposed joints, they selected the Emseal BEJS System provided and supported by NCC (Movement Joint Systems). The Emseal BEJS System can handle harsh environmental conditions and has greater movement capability, better low temperature flexibility and higher temperature stability than other joint movement technologies. In a single installation, BEJS provided a watertight durable seal, with a joint movement capability over 100%, including 3-dimensional movement, plus it required no invasive mechanical anchoring as it is bonded in position.
Emseal Acoustic & Thermal Movement Joint Sealing for the New Aviva Studios, Manchester - The Factory
NCC – Emseal Movement Joints
Aviva Studios, Manchester - The New Home of Factory International:Fire resistant, acoustic joint sealing of the complex facades, has been completed with Emshield-WFR and Emshield QuietJoint from NCC Movement joints Limited. NCC Movement joints have supplied Emshield-WFR-2 and Emseal QuietJoint to seal the wide, high movement capability, expansion joints in the complex facades of the new Aviva Studios in Manchester. Aviva Studios are new arts and cultural venues, which are now the new home of Factory International, and located in the centre of St John’s. This is the 13-acre regeneration project around the old Granada TV studios in Manchester. On this prestige project, the architect was Ellen van Loon, a partner at OMA (Office of Modern Architecture), who designed the buildings to create an eclectic environment for the arts, including striking and complex architectural facades. This included her trademark industrial styled finishes, cladding the facades with corrugated metal panels, and incorporating large exposed concrete surfaces. Structural engineering for the project was provided by Burro Happold. The structural movement joints in the external façade and walls, as well as in some of the floor slabs, had to be designed to accommodate not only significant movement (+/-50% or more), whilst maintaining watertightness, but also to be CE certified fire resistant for at least 2 hours, and it was also essential to maintain the high acoustic soundproofing and thermal insulation of the building across the façades.Emshield-DFR/WFR-2 for internal joint sealing, from NCC Movement Joints Limited was the ideal solution, quickly installed as a complete system to meet all the specified requirements in a single solution, with no mechanical fixings, and without disrupting other trades. The Emshield system was installed by TECL (Thermal Engineering Contracts Ltd) as the acoustic and firestopping specialists on the project, as well as by the specialist façade manufacturers, Lindner Prater.The 13,350 m2 building has been designed to provide open spaces that are flexible, adaptable, and capable of being reconfigured for a wide variety of shows at different scales. The key facilities are The Hall, an auditorium that seats 1,600 but can accommodate 2,000 standing; and The Warehouse, an open performance space 21 metres high, with capacity for 5,000 people, all designed and built with advanced acoustic-insulation. They can function separately or together, with a stage that can stretch back to a depth of 45 meters. Factory International are named after the Factory Records record-label, which was founded by the late Tony Wilson ran Manchester’s Haçienda nightclub in the 1980’s and launched bands such as the Happy Mondays and Joy Division. Their new home at Aviva Studio complex is the first public project by OMA in the United Kingdom, and already regarded as the most ambitious cultural development for the future in Manchester.
Robust Expansion Joint Cover Helps Transform Refurbished Shopping Centre
Construction Specialties (UK) Ltd
Popular shopping centre The Mall Maidstone recently underwent a £6 million refurbishment that was completed in 5 months and took place mostly during the night. Some of the work carried out included smarter strip lighting which changes according to the weather, white porcelain flooring, and enlarged shop fronts.
CS provided them with GTP-300 HD expansion joint covers. This is a strong, recess mounted, and flush floor cover that is perfect for this type of application with persistent traffic over the joint. This durable joint cover will allow traffic in the shopping centre to move safely for years to come.
Metal pipe boxing in the round
Pendock
Metal pipe boxing from the Pendock Profiles range is concealing heating pipework, electrical cabling and ventilation ducting at Phoenix Point in Thamesmead as part of a refurbishment and upgrade programme of homes at the striking, cylindrical high rise building.Originally built in 2008 on the site of a boiler house used for a community heating scheme, the 8 storey, circular building provides a mix of one and 2 bedroom flats. The Pendock aluminium boxing is used extensively in the refurbishment and is located below the walkway on each tier, following the form of the structure to conceal building services, as well as acting as a mounting point for lighting.
Movement Joint Resin Injection, London.
Newton Waterproofing Systems
At this new-build shopping centre in Shepherd's Bush, West London, the new underground car park was experiencing high levels of water ingress through two movement joints that had failed. Newton Specialist Contractor ASF Waterproofing, who are specialists in injection resins and structural repair work, was therefore called in order to provide a quick solution and fix the leaking joints.Following an initial investigation, the technical team from ASF decided to use the 5-part acrylic rubber sealing resin Newton 324-SR to seal the joint, as it reacts to form a very durable and flexible seal that exhibits exceptional adhesion, making it ideal for movement joints.ASF began by drilling holes at angle into the concrete, and at regular intervals for the 10mm injection packers above the joints. The injection packers were then fitted to each hole, and foam backing rod was used to temporarily block the joint and prevent uncured resin from escaping as it is injected.The five components of the PC 509 Rubber Acryl are mixed to make two solutions, whilst the curing time of the resin can also be adjusted by changing the quantity of initiator used. The resin was then injected through the packers and into the joint using a three-component stainless steel pump.Finally, once the resin was cured and the joints were effectively sealed, ASF ground back the surface of the concrete to either side of the joints and applied Newton 106 FlexProof, a flexible liquid waterproofing material, to provide a final protective seal and finish the job.With two leaking movement joints in a finished structure, the client required a swift resolution to get the area back into use quickly. With the benefit of Newton’s advanced resin and waterproofing products, ASF got to site and delivered the sealed joints within the client’s tight timeframe.
Emseal SJS System to Seal Ramp Joints at Trafford House Car Park, Old Trafford, Manchester
NCC – Emseal Movement Joints
Client: Bruntwood Estates Specialist Contractor: Grade-2 Structural Repairs Main Products Used: Emseal SJS SystemThis busy, multi-storey, prime location, car park is located between Manchester United’s Old Trafford Football Stadium, Lancashire’s Old Trafford Cricket Ground and Trafford House, a 12-Storey commercial development. The businesses use the car park during the week and then it is reserved for MUFC fans on matchdays and weekends. The car park was undergoing scheduled structural inspection, when it was discovered that the traditional compression joints were failing in the wide structural movement joints on the access ramps. This meant they were now leaking and allowing water ingress, which could lead to damaging salt deposits on expensive vehicles, as well as potential corrosion and damage to the reinforced concrete decks and the structural frame itself. These joints needed to be made watertight and accommodate significant horizontal and vertical movement, as well as traffic impact and weathering. The engineers looked for a solution that could safely repair and seal the joints, but with only minimal ramp closure or downtime, and the Emseal SJS System was selected as the ideal solution, as it could be installed in just two short, phased closures at weekends, when there were no home games. In the first weekend, with only one lane closed, the failed compression joint was removed and the joint arrisses made good with fast setting resin, then on the next weekend closure, the bespoke lengths of Emseal SJS were installed with access only required from above.
Metal pipe boxing protects sprinkler pipework
Pendock
Metal pipe boxing from the Pendock Profiles range is being used at a London tower block to conceal and protect fire sprinkler pipework, cabling and other services as part of a fire safety upgrade and refurbishment programme.Bespoke manufactured to the exact dimensions and project requirements, the metal boxing is non-combustible, which makes it suitable for use in public areas, such as lift lobbies, landings and corridors, where no sprinkler heads are present.Finished in white PPC, the metal pipe boxing not only improves the overall aesthetics, but also provides durable protection for pipework and services, while the integrated hinged inspection panels allow easy access for routine checks and maintenance.
Emseal BEJS used to seal Parapet & wing wall joints on the new Dodmoor Bridge A45, Daventry Link Road in Northamptonshire
NCC – Emseal Movement Joints
Client: Highways Agency, England, with Northampton CC Main Contractor: Balfour Beatty Main Products Used: Emseal BEJSEmseal BEJS used to seal Parapet & Wing wall joints on the new A45 Dodsmoor Bridge in Northamptonshire:This new bridge forms part of the A45 Daventry Link Road at Dodmoor in Northampton, where the wing-wall joints and the parapet joints with the precast elements provided a challenge for the engineers. These joints had to be able to accommodate the anticipated high levels of movement, but the site measured widths of the joints varied from around 25-30mm up to around 100mm. The potential movement, including movement in different planes, their variable form and dimensions, were too much for any ‘normal’ preformed joints, or extruded, gun-applied, so-called ‘mastic’ joint sealants to be used. This is clearly evidenced in the inset picture, where the specified extruded sealant was already seen to be failing under this loading. Additionally, the wing-wall joints were to be back-filled with a watertight seal. Following previous experience with difficult and complex movement jointing requirements, the Balfour Beatty engineers discussed the situation with NCC and the Emseal BEJS System was identified as an ideal solution. Emseal BEJS is available in different widths that can also be precompressed further for ease of installation, it is fast and easy to install, plus importantly requires no invasive mechanical fixings.
T-Pren Expansion Joint on the Royal Opera House
Matthew Hebden
The T-Pren gutter expansion joint was used extensively on the complicated roof layout of the Royal Opera House, to provide waterproof in line expansion joints and so reduce the number of outlets required.
Emseal SJS Selected for Wide Deck Joints at Manchester Airport T-2 Multi-Storey Car Park, Manchester
NCC – Emseal Movement Joints
Client: Manchester Airport Group Architect: Pascall Watson Consulting Engineer: Burro Happold Main Contractor: Laing O’Rourke Specialist Contractor: Thelwell Flooring Main Products Used: Emseal SJS System and Emshield DSMThis new 9-storey car park with 3,800 spaces, was built as part of the £1 billion Terminal-2 redevelopment for Manchester Airport Group (MAG). To save time and space on site, the consultants used an innovative design, with a hybrid combination of steel delta beams and precast concrete, then on site the hollow-core precast floor slabs were topped with a 100mm thick reinforced concrete screed. To fully accommodate the anticipated levels of thermal movement and loadings in service, the engineers incorporated wide, high movement capability, structural expansion joints across the parking decks, between the different sections of the building. Given the dimensions of the deck joints (100mm) and the high movement capability required (100% = +/- 50%), with simultaneous exposure to the elements whilst under frequent heavy traffic, the joint sealing solution could only be specified as the Emseal SJS System. This unique structural expansion joint system easily accommodates high levels of movement in more than one plane, plus it has an integral coverplate to provide protection of the central movement section and the joint arrises. Importantly, the Emseal SJS is bonded into position with a structural epoxy adhesive from above, therefore requiring no access from below and enabling other works (e.g. M&E cable works etc.) to continue, plus as it is fully bonded, the SJS system requires no potentially damaging drilling into sound concrete to install mechanical fixings. In less trafficked wide joints at the perimeter, the Emseal DSM System was used, as a cover plate was not necessary.
Case study - heavy duty pipe supports
Walraven Ltd
We were approached to help design the support system for two new district heating pipelines running under a newly constructed bridge spanning the River Avon.There were several complexities on this project including the heavy pipework, pipe expansion, corrosive environment and vibrations.
South Kesteven chooses Pendock metal pipe boxing in Grantham
Pendock
Riverside age exclusive housing in Grantham is using aluminium boxing from the Pendock Profiles range to conceal pipework installed as part of South Kesteven District Council’s programme of heating system upgrades.Originally built in 1980, Riverside provides 50 one & two bedroomed flats, and the metal boxing covers both horizontal and vertical pipe runs across the front and sides of the buildings as well as the point where they enter each flat. The Pendock metal pipe boxing is bespoke manufactured from 2mm thick aluminium and incorporates Incorporating a PPC RAL 9005 black finish.
Type G200 - Duff & Phelps
Movawall Systems Ltd
Kroll (previously Duff & Phelps) operate within the risk and financial advisory sector, with UK offices based in Manchester’s Northern Quarter for which we had the pleasure of providing a Type G200 folding partition system during a recent refurbishment. The operable wall allows the space to be transformed from a large open plan area into two separate rooms as and when required.The Type G200 system offers impressive acoustic, achieving up to Rw 47dB when fully closed – minimising noise transfer between the two spaces, without compromising on light transfer. In this instance, a fully glazed, full height pass door allows for easy access between the two smaller rooms when the system is in use.
Emseal SJS System solves leaking deck expansion joint problems for the Elmsleigh Shopping Centre at Staines in Middlesex
NCC – Emseal Movement Joints
Owner: Aberdeen Asset Management Principal Contractor: Cemplas Waterproofing & Concrete Repairs Ltd Main Products Used: EMSEAL SJS systemCemplas has recently completed repair works at the Elmsleigh Shopping Centre in Staines, which included the replacement of deteriorated and failing mechanical movement joints in the service decks. The Centre’s retail units are supplied via ramps to these service decks, which carry the delivery traffic above the stores, plus the decks are also used for car parking, meaning that in addition to being fully exposed to weathering, they are subject to almost continuous dynamic loading from traffic up to and including heavy articulated HGV’s. Unfortunately, despite past attempts at repair and resealing, there had continued to be water ingress through these joints, both into the structure and into the retail units that are directly below, resulting in disruption, damage and cost for everyone involved. The innovative Emseal SJS system that includes integral cover plates, but with no mechanical fixings required, was selected by the Project Engineers as being ideal to accommodate the necessary movement, seal the joints and withstand the traffic loadings. Additionally, as access was only required from the top deck to install the Emseal SJS System, Cemplas was able to carry out the works quickly and keep disruption to an absolute minimum.
Type 100SE - Radiation Protection
Movawall Systems Ltd
As business evolves and requirements change in our fast-paced world, Movawall Systems Ltd continue to bring ground breaking, intuitive products to the industry and pride ourselves in being able to create unique and bespoke systems for all our clients, whatever the application. One of our latest projects which has been installed and tested has made us particularly proud and set a new standard in acoustic movable walls.The requirements on this project were clear and simple with very specific needs for one of the leading pharmaceutical companies and we were going to tackle it head on. A movable acoustic wall with radiation protection for a research and testing environment needing to maximise flexibility while still offering the safety and protection required in a radiology environment.Our Type 100SE semi-electrically operated movable wall was developed and tailor-made for this requirement; with X-Ray protection and specialised seals to ensure the ground-breaking radiation protection and acoustic levels would be achieved. Each wall weighed in the region of circa 6 tons and the top hung system was fitted with our Type “K“ track which allows for remote and varied stacking locations. The walls varied in width and height but were all finished in Rigato Formica laminate with aluminium protective edge trims. The vision panels in the pass doors were fitted with Med-X type single glazed glass between two layers of 4mm thick toughened glass.
Fascia Soffit System and Contemporary Diameter Rainwater Pipes at Justice Court, Norfolk
Dales Fabrications Ltd - Aluminium Eaves Products
Location: Cromer, NorfolkProject Type: Retirement HousingDevelopment Cost: £12mProduct: Stone Corbel Profile Fascia Soffit SystemFinish: Powdertech Corby: Sandstone Product: 75mm Contemporary Round Rainwater PipesFinish: Syntha Pulvin RAL 9011 Satin Client: McCarthy & Stone Retirement HomesArchitects: FB Architecture LtdMain Contractor: McCarthy & StoneSub Contractor: Roweaver Developments Ltd
Emseal SJS System installed to seal wide seismic movement joints for the main Stadium at Basra Sports City, Basra, Iraq
NCC – Emseal Movement Joints
Client: Basra Sports City, Iraq Project Design: 360-Architecture Structural Engineering: Thornton Tomasetti Main Products Used: EMSEAL SJS SystemThis spectacular 65,000-seat, combined FIFA and Olympic event compliant stadium in the City of Basra, Southern Iraq, is built on geology that dictated the need for substantial seismic stadium expansion joints up to 400mm wide. The Project Design team had good experience on major projects with EMSEAL jointing systems for use in demanding situations such as stadium concourses, so they specified the EMSEAL SJS-Seismic Joint System. Each custom assembly was produced in our Toronto facility to the measured field dimensions for installation according to a detailed plan, with training at EMSEAL’s Boston, USA Training Centre, with a full-size mock-up of a tread-riser-tread assembly to match those in Basra. The EMSEAL SJS System ensures continuity of a watertight seal through changes in plane and direction, whilst accommodating the potentially high movement within the joints and without transferring any tensile stress to the structure. The system is free of any additional hard, noisy anchors or connections and does not present any slip or trip hazards. It also safely accommodates the high point loads of small-wheeled fork lifts and stacker trucks for facility maintenance crews and of course, the food and drink wagons and millions of footfalls per game from the fans.
Type 100 - Longwater Reading
Movawall Systems Ltd
This recent Type 100M installation at Longwater, perfectly demonstrates the unique properties a movable wall can offer. Working closely with Tate Hindle Architects and BAM Construction we were able meet and exceed their expectations. Oxford Properties now have a conferencing facility with complete flexibility and the ability to cater for multiple clients of various sizes.
Metal Pipe Boxing for communal heating project
Pendock
A project to install a communal heating system at low rise flats and maisonettes at Bretton House and Sanders Way, in the London Borough of Islington, is using bespoke metal pipe boxings to conceal external pipework.The more efficient heating system was installed as part of Islington Council’s ongoing cyclical repair programme, which assesses all properties on a 7 to 10 year cycle to establish where improvements need to be planned & implemented.The Pendock casings are manufactured from 2mm thick corrosion resistant aluminium and incorporate a brown PPC finish to integrate with the brickwork and provide a consistent finish to the project. The use of aluminium not only improves weather resistance, but also adds tough protection to the external pipework.
Emseal SJS System Seals the structural deck movement joints on the new White-Link Ferry and Ro-Ro Terminal in Portsmouth
NCC – Emseal Movement Joints
Client: Whitelink Ltd Contractor: Floor & Wall Ltd Main Products Used: Emseal SJS SystemWhitelink is the leading ferry operator across the Solent from the mainland to the Isle of Wight and carries more than 5 million passengers a year. Their Portsmouth car ferry terminal in Gun Wharf has benefited from White-link’s £45m investment programme to upgrade the facilities, with new double deck parking and boarding ramps. The wide deck and ramp joints needed to be designed to safely accommodate high levels of movement from the combination of thermal and direct frequent traffic loadings, with simultaneous exposure to the marine environment, as well as maintaining watertightness to protect the structure. The engineers knew that selecting the right expansion joint system was going to be critical to the success of the project and their evaluation showed the Emseal SJS System was the best solution. Unlike most trafficable expansion joint systems, the Emseal SJS solution was extremely cost effective, required no potentially damaging mechanical fixings and with installation from the top side only, therefore the works could continue with minimal disruption to ongoing ferry services and the normal White-link customer experience.
Type G200 - Smoove
Movawall Systems Ltd
Having outgrown their previous offices, Smoove – a company operating in the property sector (formerly ULS) – took the decision to take on three floors at Masters Court; a fully refurbished office building in the quaint town of Thame, Oxfordshire. They swiftly appointed HNB and Leap Architects to deliver an overhaul of the dated interior that would better suit the Smoove team.We were approached to deliver a glass moving wall capable of separating the ground floor kitchen and main open plan space when required. Our Type G200 system was chosen, which provides transfer of natural light when partition is closed while simultaneously stopping the transfer of noise.The minimalist manifestations applied to the glazed panels along with their black painted frames have been designed to match a number of fixed glass partitions within the space, offering a consistent design throughout.
Type G200 - Duff & Phelps
London Wall Design Ltd
Kroll (previously Duff & Phelps) operate within the risk and financial advisory sector, with UK offices based in Manchester’s Northern Quarter for which we had the pleasure of providing a Type G200 folding partition system during a recent refurbishment. The operable wall allows the space to be transformed from a large open plan area into two separate rooms as and when required.The Type G200 system offers impressive acoustic, achieving up to Rw 47dB when fully closed – minimising noise transfer between the two spaces, without compromising on light transfer. In this instance, a fully glazed, full height pass door allows for easy access between the two smaller rooms when the system is in use.
Metal pipe boxing adds the finishing touch in Camden
Pendock
Extensive upgrades to the distributed heating system at two low-rise housing blocks by Camden London Borough Council, have chosen Pendock bespoke metal pipe boxing to conceal and protect exterior pipework.The 3 storey Ludham block and 6 storey Waxham building provide more than 200 dwellings, which are occupied by both tenants and leaseholders. Following the installation of the heating system pipework to the exterior of the buildings, the Pendock aluminium and PPC coated boxing was installed to provide a uniform and more aesthetic finish to the project while also providing weather protection.
Type 100SE - Radiation Protection
London Wall Design Ltd
As business evolves and requirements change in our fast-paced world, London Wall Design continue to bring ground breaking, intuitive products to the industry and pride ourselves in being able to create unique and bespoke systems for all our clients, whatever the application. One of our latest projects which has been installed and tested has made us particularly proud and set a new standard in acoustic movable walls.The requirements on this project were clear and simple with very specific needs for one of the leading pharmaceutical companies and we were going to tackle it head on. A movable acoustic wall with radiation protection for a research and testing environment needing to maximise flexibility while still offering the safety and protection required in a radiology environment.Our Type 100SE semi-electrically operated movable wall was developed and tailor-made for this requirement; with X-Ray protection and specialised seals to ensure the ground-breaking radiation protection and acoustic levels would be achieved. Each wall weighed in the region of circa 6 tons and the top hung system was fitted with our Type “K“ track which allows for remote and varied stacking locations. The walls varied in width and height but were all finished in Rigato Formica laminate with aluminium protective edge trims. The vision panels in the pass doors were fitted with Med-X type single glazed glass between two layers of 4mm thick toughened glass.
Emshield DFR System was used at the new Tottenham Hotspur Stadium for Fire Resistant Sealing of the High Movement, Wide Structural Movement Joints
NCC – Emseal Movement Joints
Client: Tottenham Hotspur Football Club Design: Populous Main Contractor: Mace Main Products Used: Emshield DFR2 and Emseal Security Seal SSW2Tottenham Hotspur Football Club has moved into its new home which also has a partnership with the American NFL that will see at least two major American football games played at the stadium each season. This was made possible by the innovation of a retractable natural grass pitch, which will be used for Spurs home fixtures and an artificial multi-use surface underneath for the NFL matches, plus concerts and other events. With a seating capacity of 62,000, the Tottenham stadium is designed to ensure that the spectators are closer to the pitch than at any other comparable ground in the UK. It also includes the UK’s largest single tier stand, which will hold up to 17,000 fans in the Spurs home-end. As is typical for modern stadium design, there was a critical requirement for wide and high movement joint sealing systems in several important areas. These included joints in the plant service areas and walkways over prestige VIP and hospitality suites that also had to provide fire resistance, plus the important and often difficult heads-of-doors joints. These requirements were all safely and securely met using Emseal DFR-2 and Emseal SecuritySeal SSW2 respectively
Type 100 - Longwater Reading
London Wall Design Ltd
This recent Type 100M installation at Longwater, perfectly demonstrates the unique properties a movable wall can offer. Working closely with Tate Hindle Architects and BAM Construction we were able meet and exceed their expectations. Oxford Properties now have a conferencing facility with complete flexibility and the ability to cater for multiple clients of various sizes.
Type G200 - Commercial Offices Manchester
Movawall Systems Ltd
With views overlooking central Manchester from several floors up, the designers for this workspace have utilised glazed partitions throughout to maximise the transfer of light and make the most of the stunning backdrop offered by the city skyline.London Wall was approached to provide a glass moving wall system that could seamlessly integrate in to the overall design of the space by matching the proposed glass partitions, while offering space flexibility.Our Type G200 system was the perfect choice, with a crittal effect indention to the static panels on show elsewhere within the space. The glazed panels can quickly and easily be stacked, allowing staff the choice between a single, large open plan space or two smaller spaces.When the panels are in use, the two spaces both remain easily accessible thanks to a lockable pass door. Type G200’s impressive acoustic performance ensures that sound transfer between the two spaces is kept to a minimum, therefore reducing noise distraction and increasing privacy.
Emseal DSM System used to seal wide & high movement Deck Joints on New Brighton University Car Park
NCC – Emseal Movement Joints
Client: University of Brighton Consultant: Stripe Main Contractor: Keir Construction Specialist Contractor Thelwell Flooring Main Products Used: Emseal DSM SystemThis new multi-storey car park for the University of Brighton is part of a major redevelopment of the former Preston Barracks site in the City. There are 550 parking spaces on 7 floors, including 55 EV charging bays, plus there is a PV array on the roof with the power stored in batteries on the ground floor, which also includes 330 cycle parking spaces. The car park design uses a Vertical Circulation Module (VCM) that provides a more efficient solution for confined sites, as this contains no external ramps and traffic circulation is via slopes within the floors themselves. This creates more parking spaces in the steel framed structure in the centre, with two lift and stair cores positioned at each end. This design also made it possible to locate the necessary structural expansion joints transversely between these 3 parts of the structure and away from major traffic impact areas. The engineers specified these joints to be a nominal 40mm wide to accommodate a high movement capability of up to +/- 50% (i.e. total 100%), as they knew these could be quickly, securely, and durably sealed using the Emseal DSM System. This also saves time on site as it is installed from above, allowing other trades to continue working below, plus as it is bonded into position, there is no potentially damaging drilling for mechanical fixings.
Type A and Type C Waterproofing - Delta Amphibia
Delta Membrane Systems Ltd
The scope of this project was to offer a waterproofing solution to an early 19th century two storey, listed cottage sited in a conservation area of beautiful countryside in Scotland.Providing a guaranteed, cost-effective scheme that would comply with BS 8102:2022 (Protection of below ground structures against water ingress. Code of practice.).For any structure below ground, either fully or partially, waterproofing is essential for protecting and preserving integrity.
Showing 1-36 of 754