"office desk"

The Arena Central projects comprises of two blocks housing 324 apartments, part of a £40 million build-to-rent scheme. Location: BirminghamContractor: Galliford TryClient: Dandara LivingAspex supplied: Novista Riser Steel Doors 

Our innovative Alto FENIX toilet cubicles, with their unique super matt surface, have been used to create a striking design statement for a leading fashion retailer. Manufactured from FENIX NTM using the latest nanotechnology, the Alto FENIX toilet cubicle is soft to touch, thermally self-healing, impact and scratch resistant, hydro repellent and has enhanced anti-bacterial properties, making it ideal for washrooms where a luxury, high performance finish is required. The new washrooms also feature our Concerto integrated duct panels, finished in Formica high pressure laminate.

Hydrostop AH-25 liquid roofing was chosen as a better alternative to built-up roofing for installation to a new build Surrey County Council office development. The Hydrostop AH-25 system was applied over a concrete substrate with a bituminous vapour control layer with Eurodeck liquid roofing board and cut to falls insulation.

The problem Hitachi had came from the sun’s glare. Being a tall building with lots of large glazed areas, south-facing and with other glazed buildings around it, office workers would be subjected to long periods of sunshine. YewdaleDefiant® R20 Sidewinder roller blinds were specified with Mid Grey 3% Roe fabric. This fabric is a screen fabric that limits the glare of the sun but still lets in plenty of ambient light. Read more about this project.

The renovation project above the theatre in Barnsley, developed by HLM Architects and constructed by Code Building Solutions, successfully integrated the SubFloor Raised Access Floor system to meet the acoustic damping, height increase, and level installation requirements. The system's acoustic feet effectively reduced impact noise, rebound noise, and flanking transmission, creating a productive and comfortable office environment. The inclusion of fibre-reinforced screws and slow-grown Swedish pine ensured the system's compliance with load-bearing requirements. Contractors praised the simplicity and efficiency of the assembly process, reaffirming the system's suitability for architects and contractors in the construction industry. The SubFloor system proved to be a reliable and effective solution for achieving superior acoustic performance and efficiency in office renovations.Products:Wooden Joist 45 x 70 mmSubFloor Screw 300 mmScrew Foot Acoustic 25 Construction:Joist separation c/c 600 mmBuilding height: 112 – 364 mm Data:System weight: 4.50 kg/m²Acoustic damping: Up to 28 dB [rating according to ISO 717-2]Point Load 50 x 50 mm (c/c 600 mm):15.3 kN/m² - Next to screw over joist10.6 kN/m² - Between joists[According to SS-EN 1195:1998] Materials:Pine T0-C24Fibre-reinforced VitamidePolyamide + Thermoplastic Elastomer

A portfolio of Rockfon acoustic systems feature throughout the former British Gas Engineering Research Station (ERS) where iconic 1960s modernism meets 21st Century needs following sensitive and innovative refurbishment on a grand scale.The former ERS building at Killingworth has a very strong architectural pedigree. The 50,000sq.ft. Grade II* listed structure sits within a ten acre site and was the brainchild of pioneering architectural partnership Ryder and Yates. Built in 1967, the starkly beautiful, uncompromising construction was influenced by such luminaries of modernism as Le Corbusier and Lubetkin.Collaboration delivers heritage sensitive solutions Rockfon were very pleased to have been selected for the project and to have worked with RIBA Chartered Architects, Ainsworth Spark Associates on the specification of acoustic ceiling and wall systems for such an important and sensitive undertaking on behalf of property owner and main contractor North Tyneside Council. The building is now a fit for the future, multi-use resource which includes public access areas, open plan work spaces, smaller offices and meeting rooms. A primary eco-drive for the project was to bring the building back into use rather than wastefully demolish it only to build a new facility elsewhere. Recognition and respect for the building’s listed status were at the forefront of the architects’ plans. The development offered Rockfon the opportunity to demonstrate a portfolio of acoustic systems to match the particular demands of each space throughout the building.Rachel Charlesworth of Ainsworth Spark Associates talked about the project, “We needed to expose the history of the building and respect its architectural heritage whilst delivering a positive, modern working environment. An example of this was to painstakingly remove original service grid, thoroughly clean all components, down to each nut and bolt, and reinstall to help tell the historical story visible above the Eclipse Islands. The Rockfon team worked closely with us, providing solutions, particularly for the 1st floor concourse. Rockfon Blanka® X with a concealed grid and bespoke edge trim delivered the smooth, seamless appearance we were looking for to fantastic effect. The new ceiling systems clearly define the refurbishment and were a crucial part of the build.”Rockfon Blanka® offers a wide choice of options for installation and usage. Its smooth high white surface is non-directional, speeding up installation, saving time and money. The range embodies Class A sound absorption, 26dB – 46dB room to room sound Insulation, 87% light reflection and >99% light diffusion. Blanka B was also used as wall panels. All Rockfon acoustic systems are made from naturally occurring inert volcanic rock stone wool, are non-combustible and will not harbour harmful microorganisms and bacteria. Rockfon also contributes to a more sustainable future. They are recyclable and have a high recycled content, supporting the closed-loop circular economy, and are certified to leave a positive impact on people and the planet as the firm’s latest Cradle to Cradle certification confirms. Architectural legacy meets modernityThe building’s interiors use a pared back palette of greys and light wood to great effect with occasional elements picked out in blue. Original floor to ceiling strip windows and new, glazed screens, allow light to filter through.In the vast, open plan work spaces around 600 square format Rockfon Eclipse® Islands have been used to control sound and diffuse the visual impact of the exposed mechanical and electrical services above. These elegant, frameless acoustic islands are suspended in a linear formation by wires affixed to the three metre high plenum but they can also be installed using a suspended grid or fixed directly to the soffit. They absorb sound on both sides, helping to reduce reverberation time and improve ambient sound levels. Their smooth, deep matt, super white surface has anti-static properties which extend product life. Elsewhere in smaller spaces, Rockfon® Koral™ and Rockfon® Tropic™ tiles were used. Dimensionally stable, each has an attractive moisture resistant surface. Installed with semi-concealed or visible grid options they both offer Class A sound absorption and Class A1 fire safety.Rockfon expertise and support always availableKD Building Solutions were responsible for the ceiling systems installation. The firm’s John Duffy, “We wanted to develop our expertise in ceiling installation and this project certainly gave us the opportunity to do that. We faced challenges due to the need to protect the listed interiors and the re-use of original materials but Rockfon’s Jim Lundy was always available to offer support and advice. Thanks also to Minster, Newcastle for ensuring Rockfon materials were there on time. The completed installations look and perform brilliantly.”

A great example of 1930s Art Deco architecture, The Douglas Building sits on Great Titchfield Street in London’s West End. Formerly known as The Media Village, Douglas House was acquired by serviced office providers The Office Group (TOG) from landlords The Langham Estate in 2019. TOG together with Note Design Studio transformed the building with a colourful concept that blends the distinctive 1930s features and gives a sense of fluidity, openness and light throughout.As its former name suggests this area of London is a hub for local media and IT businesses operating out of the West End and the brief for the building was to create a flexible workspace where people can feel stimulated by their environment leading to greater productivity. Wellness was also a central focus and the building includes an oxygen room, a parents’ room and a roof terrace which are all integral to enabling and inspiring everyone who enters.Well ventilated and an abundance of natural light have become buzzwords in the COVID era and the more than 300 new steel windows from the Clement EB24 range which were chosen by office fit out and refurbishment contractors Parkeray perfectly facilitate both. Polyester powder coated in Pure White and furnished with Warren handles in a satin chrome finish the windows lend the building a contemporary look on the outside as well as supporting the 21st century ways of working inside.Peter Clement, Chief Executive of Clement Windows Group, commented:“As with all prestigious window replacement projects of this magnitude Clement took part in a competitive tender process. Whilst this was in play we understand that both Parkeray and the client’s team had the opportunity to compare our EB24 steel window to others being considered. We believe it was the quality and overall finish of EB24 combined with an attractive price and fine references that convinced them and the client to proceed with us.”

One of the first projects we worked on with Vox Ignis was a 16-storey student accommodation development in Bournemouth with an adjoining car park and office building, that required an Emergency Voice Communication System (EVCS). The property developer was – and remains to this day – one of our largest clients, so we knew we had to work with a partner we could trust and that had the capability to provide us with products that were really at the cutting-edge of the safety and security industries.Prior to this, just after they’d launched Vox Ignis, the two founding partners of the firm had both paid a visit to our headquarters in the South East to show us their marketing material.  Once they demonstrated a few examples of their products, we were sold on them As a company which specialises in the design, installation and maintenance of fire and security systems, we know that the products we buy have to be not only innovative but also aesthetically pleasing, as a lot of the people we work with are architects and creatives. This is what really made Vox Ignis stand head and shoulders above everyone else we’d worked with. Not only were their products leaders in their field in terms of technology but they were also, by far, the best-looking products out there from a design point of view.3x VILX-TMS-W-8 Master Stations6x VILX-EX-8 Expander Panels44x VILX-OSB Type B Outstations

A range of CS louvre solutions were selected for the Met Office HQ in Exeter to ensure efficient airflow and protection from wind-driven rain ingress. The RSH-5700 louvre delivering Class A rain defence up to 3.0m/s was installed in the sloping façade of the main building. This model is available with an optional glazing frame detail for easy integration into curtain walling. For the IT building, where airflow delivery was a key specification factor, the A-3105C ventilation louvre offering continuous blade appearance and hidden mullions was selected. This product offers Class 1 airflow performance and low pressure drop.

Rathbones is part of Rathbones Group Plc, one of the UK’s largest and longest-established wealth management firms. Reflecting a growing presence in Scotland, the company recently relocated their Edinburgh offices to 10 George Street, delivering a modern and enhanced environment for employees and visiting clients. Bringing over 20 years of partitioning expertise to the refurbishment project, Style worked closely with architects, Form Design Consultants, and contractor AKP Scotland, to create flexible space in the main boardroom.A Dorma Hüppe Variflex ML100 semi-automatic moveable wall system allows the impressive boardroom to be quickly divided into two separate meeting areas whilst a second Variflex can be moved into position to create a breakout room. Rathbones Group has been providing wealth management services for private clients, charities, trustees and professional partners since 1912, and has 14 offices throughout the UK and Jersey. Refurbished to the highest standards, the new George Street offices have strong environmental credentials, including a BREEAM rating of ‘very good’, and deliver flexible working space that actively encourages collaboration. Style’s final partitioning solution offers the ability to provide one large conferencing suite, a boardroom plus breakout area, or alternatively, two meeting rooms with breakout facility.Reflecting the inviting yet sophisticated interior décor, the walls are finished in a combination of contemporary Kvadrat fabric and dark walnut laminate. The semi-automatic operation smoothly expands the acoustic seals to exactly the right pressure every time, creating an exceptional acoustic rating of 60dB, allowing for complete privacy between divided areas.“This is an absolutely stunning installation,” said David Louden, Style’s director for Scotland, “and a credit to Form Design and AKP Scotland, who have been a pleasure to work with.“They have done a great job in delivering the designer’s vision for their client, and we were very privileged to be part of such a high-quality project.

Rockfon is very happy to have played its part in ensuring the team at premium British lifestyle brand Joules’ new Market Harborough HQ can work in an interior environment where beauty and acoustic control create the perfect space for collaboration.Founded by Tom Joule over 30 years ago, the Group had ambitious aspirations to create a new home that would support its continued growth over the coming years.  Edge vision melds contemporary with heritageEdge Architecture + Design were appointed to lead the project and chose to specify Rockfon acoustic systems. The result is a contemporary, eye-catching 60,000 sq. ft. new HQ, which brings the brand’s UK-based office teams under one roof for the first time. Amplifying the brand’s heritage and reflecting the site’s semi-rural setting, the campus resembles a series of interconnecting barn structures that appear to have evolved over time. The complex is surrounded by landscaping including wildflower meadows and a kitchen garden which enhances the natural feel of the space. Michael Fern, Principle at Edge, said, “This new space will enable a workplace strategy of nimbleness, agile working and wellness… We also wanted to create a strong sense of place that respects the natural surroundings of the site and have designed the scheme as a human scale experience with the building and the landscape interacting in a symbiotic way. We took the local farmstead vernacular as a starting point for the visual aesthetic and used sustainable materials.”Tom Joule, Chief Brand Officer and founder of Joules, said, “This has been a hugely exciting project for our company and our future. We are delighted with the new HQ which will support agile working and new efficiencies in an environment that will enable our growing business to continue to attract and retain world-class talent. Edge’s design embodies our brand and will help us preserve and support our heritage and culture as we expand.”Agricultural cues inform an 21st Century aestheticThe exterior of the campus looks sharp against the skyline whilst taking visual cues and inspiration from agricultural architecture. The interiors are a mix of single and two storey spaces encapsulating open plan and more defined rooms with levels reached by broad stairways. Structural steel and timber add visual heft to the predominantly white pallete which sees certain elements picked out in oxide red, deep teal and warm grey. It certainly delivers the wow factor and promises to nurture creative thought.Bailey Construction were the main contractor for the project, with Elmsmere Interior Systems responsible for the installation of the Rockfon acoustic systems. Gary Sturgess of Elmsmere spoke about the project, “This was an interesting project with Rockfon Mono® Acoustic used in a variety of roles and settings to help control sound while fitting in with the clean, pared down style of the interiors. Everyone concerned is very happy with the completed work which showcases Mono’s versatility.”Pandemic pause affects design choicesAppointed in 2019, Joules’ CEO Nick Jones joined the Group during the design and construction of the new HQ. However, when the pandemic struck and people shifted to working from home, construction was halted which allowed the company to revise its plans to best suit new methods of working and office culture. In response the company has expanded the central atrium and created more space between desks to promote spontaneous interaction. Meeting rooms are equipped with tech enabling remote workers to easily participate, while floor-to-ceiling windows and outdoor features, including a bug hotel, help to connect the space to the company’s countryside heritage.Nick Jones commented, “With the opening of our new office, we have introduced a new fully flexible approach to how and where our colleagues work, and the space that we have is critical to that. Not only does our new office allow teams to better connect with one and other—whether in the office or working from home—but also brings the countryside in, to help inspire colleagues from across the business.”Rockfon Mono Acoustic – versatility and styleRockfon’s Matt Barratt, “The completed Joules HQ looks fabulous. Throughout its open plan offices Rockfon Mono Acoustic has been installed to great effect, bringing together the seamless, clean lines associated with traditional plastered surfaces and acoustic performance thought only possible with modular systems. Large windows, structural steel and other hard architectural elements can generate unwanted sound within a space. Mono provides Class A sound absorption (0.95αw) which significantly decreases echo and reverberation levels.”The current utility aesthetic is in evidence at ‘the Barn’. Air conditioning, heating, ventilation and other services are on show in several areas, with Mono installed directly above. It offers Class A2 fire protection and remains dimensionally stable at up to 100% relative humidity. It offers 87% light reflection and greater than 99% light diffusion. In common with other Rockfon acoustic systems, Mono is made with a core of naturally occurring inert volcanic rock stonewall, is non-combustible and will not harbour harmful microorganisms and bacteria. It can be installed using a suspended grid system or be directly mounted on to the ceiling soffit or and wall.   

As one of the pioneers of remote working solutions, Citrix recently chose to reconfigure their offices, taking on an additional space at the Cambridge Science Park. Aiming to create an environment that would facilitate engagement, creativity and productivity, moveable wall specialists, Style worked closely with architect, Gensler, and contractor, Area Sq, to offer intensely flexible workspace.Delivering exceptional acoustic ratings of 55dB and 52dB respectively, Style installed two Dorma Hüppe Variflex solid moveable walls and a single Variflex glass moveable wall, allowing Citrix staff to section off a meeting area from the main hall and then further sub-divide the space as required. Contributing to the vibrant new décor, all walls feature black RAL 9005 profiles and dry wipe magnetic boards to encourage brainstorming. Cambridge Science Park has been home to the UK Citrix Research and Development team for over a decade. Having occupied approx. 30,000 sq ft of space on the first floor, Citrix was keen to refurbish their existing workplace as well as expand operations by taking over additional space on the ground floor.Reflecting the Citrix vision and culture, the new layout and design maximises the potential of the space, allowing staff to establish new ways of collaborating.When all three walls are in place, three smaller meeting rooms are created. Alternatively, a combination of one large and one small meeting room can be formed, or just one very large space using just the glass moveable wall. The entire space can also be opened-up into one large open plan area. “This is an excellent example of how a combination of glass and solid moveable walls can create really adaptable office space,” said Steve Williams, sales director for Style Midlands.“Thanks to the inclusion of three pass doors, access is simplified and also allows the glass wall to be left in place for extended periods if desired, creating a more permanent space. “However, due to the semi-automatic operation of these operable walls, they can be opened up extremely quickly so that the entire space can be reconfigured for different vents throughout the day.” 

Style’s glazed folding wall system, the Stylefold 120, was recently installed at Clarksons Port Services’ new offices in Aberdeen, allowing a highly functional meeting room to be quickly created at one end of a large open-plan area. When not required, the wall can easily be folded back to merge the room seamlessly into the larger space.A leading expert in moveable wall systems, Style offers an extensive range of solutions for almost any location, including being the sole UK distributor for Dorma Hüppe, as well as for the revolutionary Skyfold vertical rising wall range.The Stylefold 120 folding wall installed at Clarksons is a simple, yet very effective solution for rapidly dividing space, with the glass panels maximising natural light whilst still delivering a 31dB acoustic rating for privacy. Clarksons Port Services is a division of Clarksons, the world’s leading integrated shipping services group. Having moved to larger premises at Aberdeen Harbour’s Matthew’s Quay, with a view to increasing efficiency and reducing carbon footprint, the integrated shipping and offshore services provider now has 1,600 sq metres of outdoor storage and 2,000 sq metres of customs bonded warehouse at this site.Style worked closely with architects, Philip Rodgers Design, and contractor, TransForm, to deliver a partitioning solution for the new offices that successfully combines functionality with exceptional aesthetics. Making minimal impact on the existing structure, the Stylefold 120 is easy to install wherever an economical retrofit solution is required. “The Stylefold 120 folding wall is smooth and effortless to manoeuvre, whilst the anthracite finish specified at the Aberdeen offices perfectly complements the contemporary interior design,” said David Louden, Style’s director for Scotland.“The addition of an integrated pass door means that it is entirely practical to leave the private meeting room in situ for long periods, if desired.”

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street OfficesThe refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ PHOENIX smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the PHOENIX around the atrium, as well as other passive fire protection measures as the scheme evolves.In total T&R has fixed 22 rolls of the lightweight PHOENIX material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height - once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.The Site Manager for T&R Fire Protection, Tom Port Smith, commented: “We’ve used PHOENIX and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY's premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.FIREFLY™ PHOENIX is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.

Project detailsToyota contacted Watco looking for a long lasting anti slip decking solution. Four of Toyota GB Plc Head Office fire exits open onto an outdoor decking area, leading to assembly points. The decking is also used as a seating area at lunchtime for staff. In wet and frosty weather the decking becomes slippery, causing concern around slip hazards, especially in an emergency evacuation.Whilst the safety of its employees was the main concern, Toyota also wanted to ensure that the anti slip solution was easy to fix and would blend in with the natural colour of the decking.In addition, they needed a solution that could be fixed in the decking indentations. Having looked at several other solutions, it seems that most involved fixing the anti slip strips in the gaps between the boards, thus requiring extra work as the existing gaps were not wide enough. Our solutionWatco recommended and supplied heavy duty slip resistant GRP (Glass Reinforced Plastic) Decking Strips. The strips in ‘stone’ colour blended in well with the timber and were supplied pre-drilled for easy fixing.Toyota were delighted with the outcome. The new anti slip decking strips provide safe fire escape routes for staff, whilst maintaining the aesthetics of the landscaped outdoor area."Our GRP Decking Strips are virtually indestructible, based on an extremely durable fibreglass base with a coarse, ceramic grit which is bonded to the top for a heavy duty, slip resistant surface. Chamfered edges minimise trip hazards. The strips are available in black, stone or yellow."Watco Decking Strips are supplied pre-drilled and with screws. The strips can be trimmed on site using a hacksaw or, if required, Watco will supply the strips already cut to size.

Tallest tower in London’s financial district uses market-leading SonaSpray for acoustic perfection.As well as dominating the skyline of London’s financial district with its striking 23-sided glass façade, 22 Bishopsgate has not only rewritten the rules of what a modern office space should look like but also how it sounds. Having become a ‘mecca’ for workplace wellbeing, putting individuals and employees at the heart of its design, it was important that the spaces sounded as good as they looked. With acoustics playing a leading role in delivering overall comfort to a space, partnering interior design studios DesignLSM and The Morris Project turned to experts, Oscar Acoustics, to control sound levels within its buzzing food and dining area - ‘The Market’ for pitch-perfect ambience.  Known as the ‘foodie heart’ of 22 Bishopsgate, its selection of bustling food counters makes it a hub for workers looking to drink coffee, take lunch breaks and host meetings. However, being a lively, open hospitality space, the clink of cutlery and energetic conversation would mean that the café space was at risk of excessively high noise levels, which left unchecked would create an uncomfortable drinking and dining experience for guests.  Karen Taylor, DesignLSM’s lead designer, said: “Providing a healthy environment that would enhance the physical and mental wellbeing of those working in the building was a top priority when designing the 20,000sq ft space. The building itself includes triple-glazed windows to reduce outside noise, but it was important that the internal acoustics were just as well considered to compliment the sense of balance and harmony throughout.  “As a multi-purpose space, The Market area is a dynamic part of the building where the Bishopsgate community can unwind, dine and socialise. Whilst the area needed to have a spirited ‘buzz’ to it, there would also be guests that wanted to relax and recharge, and therefore considering the people and their needs was always at the forefront of our design strategy.” As The Market includes an array of hard surfaces such as tables and chairs in-line with its open dining aesthetic, a solution was needed to counteract noise reverberation and echo, which causes sound levels to climb. To remedy this, DesignLSM turned to Oscar Acoustics’ SonaSpray acoustic spray range. Once applied to ceilings or walls the seamless acoustic finish absorbs sound energy instead of reflecting it, enabling designers to create serene and inviting spaces. In this case, its SonaSpray fcx acoustic plaster finish was used to reduce overall noise for a more calming atmosphere. With strict building deadlines and restrictions to adhere to, SonaSpray was also chosen for its efficiency as it can be applied quickly with minimum disruption, allowing work to continue as promptly as possible.  Importantly, it was Oscar Acoustics’ third-party safety certifications that caught the eyes of designers. With such a large building to consider, fire safety had to be a number one priority. With fire credentials that go above and beyond Approved Document B fire requirements (Class 0 to BS476 & B-s1, d0 fire rating), the SonaSpray range produces little to no smoke and absolutely no droplets – which can assist in the safe escape of occupants should an event occur.  As the first building in the UK to apply for the WELL Building Standard, the premium acoustic spray was a perfect fit due its contributions towards many sustainable design and health certification systems including WELL, BREEAM, SKA, Living Building Challenge and adds up to 17 points towards the LEED (Leadership in Energy and Environmental Design) rating of a project. It also boasts GREENGUARD Gold certification which shows it has met some of the world’s most rigorous and comprehensive standards for low emissions of VOCs into indoor air, aiding in the creation of healthier indoor environments. Ben Hancock managing director at Oscar Acoustics, said: “22 Bishopsgate has raised the bar in office design and it’s a real feather in our cap to be part of such a pioneering and monumental building.  “When we were approached about the project, we jumped at the chance. The design ethos of 22 Bishopsgate aligns closely with our own values – putting employee wellness and comfort above all else.  “It’s clear that our experience working on some of the UK's biggest office refurbishments has been put into action, encapsulating future thinking around work/life balance, to create a dining destination that offers maximum comfort without comprising on design. “We know from our own independent research that excessive levels of noise are a major deterrent for workers who want to embrace hybrid working – but this building proves that if it handled correctly, it’s possible to create a space where employees want to revisit time and time again.”Image credits to Tom Meredith Photography.

20 Water Street in Canary Wharf, London is leading the way for how offices should look and feel in the post-pandemic era. As the HQ for real estate giant, JLL, this serene waterside workspace has become synonymous with sustainability and wellbeing. With high expectations to meet in terms of staff welfare, Tétris knew it needed to ensure each space was designed for appearance but most importantly experience. This meant creating productive workspaces free of distraction, where employees can focus and thrive. It was also vital that teams could easily collaborate in its spaces, without having to raise their voices to be heard. With the ability to absorb sound energy instead of reflecting it, SonaSpray K-13 Special, provided the perfect acoustic solution – giving clarity to speech and keeping unwanted excess noise at bay. Along with many other design benefits, SonaSpray follows the lines of whatever is beneath it, giving architects and designers the freedom to design without the constraints of traditional acoustic methods.Image credits to Jonathan Banks Photography.

Features early versions of FloSet Compact, FloSet 80 PICV and FloSet 105 for Fan Coil Units, Air Handling Units and CRAC Units.

Our latest photoshoot working in partnership with Panaz, Camira and Agua. Product include: Klyro, Hecta, Kulture Capaldi, Opso GD27 We've also included a sneak look at a couple new products that will be released later this year.

Cadworks™ aims to be one of the most sustainable buildings in Scotland. It has been designed with the health and wellbeing of the occupier front of mind.  Location: GlasgowContractor: Bowmer + KirklandArchitect: Cooper CromerAspex supplied: Ironmongery, Novista Riser Steel, Integra Commercial Doorsets

Biotecture’s impressive 93m2 green wall for the atrium of British Gas owner, Centrica’s new Oxford headquarters was an integrated element of the ambitious sustainability aims for the building; the green wall, which reaches three storeys up, contributed to the building’s BREEAM rating of 'Excellent', acting as acoustic buffer and a natural filter to improve air quality.

The striking angular design of the £16 Million, five-storey headquarters for safety equipment specialists Arco, forms part of the regeneration of the historic waterfront Fruit Market area in Hull. To the front elevation, the stunning façade created using Senior’s thermally efficient SF52 curtain wall makes a tremendous first impression, whilst SPW501 PAS24 certified commercial doors and Secured By Design Certified SPW600 windows ensure safety and security.With its glass fronted atrium, open plan work spaces, social meeting areas and auditorium for presentations, Arco now has the facilities to meet future needs as the company continues to grow. 

In the university city of Cambridge, three neighbouring buildings forming part of Pembroke College’s estate have recently been renovated. One of which is the Grade II Listed Kenmare House designed and built by James Essex c.1760, who was a prolific constructor in Cambridge. Due to its Listing, the original single pane windows had to be retained, so a solution to combat the noise ingress and thermal inefficiencies had to be sought. Over 60 secondary glazed units were installed by Selectaglaze throughout the buildings.

Drawing on over 20 years of experience installing operable walls, Style was recently challenged to come up with a solution to divide a large meeting area, despite there being no suitable structure in the ceiling to utilise as a fixing point. After some lateral thinking and close communication with the client, a non-structural timber frame was created for support, with the weight of the folding wall being transferred to the ground via a surface mounted floor track. A Stylefold 120 folding wall system was chosen as the only operable wall that could realistically accommodate the room structure.The client for this project was the international company, CEMAR, which offers a state-of-the-art, cloud-based administration support and contract administration product to companies in the construction sector. As part of a substantial refurbishment project of the Gloucestershire offices, CEMAR wanted to incorporate space flexibility to the existing open-plan meeting area. This would allow the expansive space to be quickly divided into two separate meeting rooms, or opened up for larger gatherings, presentations and as a general break out space.Demonstrating their expertise in this sector, Style was able to rise to challenge of installing an operable wall in an area with insufficient ceiling structure to support a partition, delivering a high-quality solution that directly meets the clients’ needs.“We’re very proud of our ability to work with clients to overcome complications in room structure and design, and develop a solution that works perfectly for them,” said Julian Sargent, Style’s group managing director.“The final installation not only complements the room’s interior design with a white melamine finish, but also offers 46dB Rw acoustic integrity and a pass door for room access when the wall is in place.”Style is the multi-award winning, market leader in moveable partitioning walls. With 4 regional offices across the UK and a showroom in London, the company specialises in creating flexible space across a broad cross section of sectors including corporate, hospitality, religion, education, local authority and healthcare.

Mazars is a leading international audit, tax and advisory firm.  With the London team nearly doubling in size in the last 15 years, the company has recently relocated to new premises next to the Old Bailey. Aiming to support an integrated, hybrid way of working, partitioning experts Style worked with architects, HLW and contractor, BW, to create flexibility within the meeting rooms. Dorma Hüppe Variflex moveable walls intersect to form a T-shape, allowing up to three individual meetings rooms to be created. With semi-automatic operation, the acoustic seals expand to exactly the required pressure to deliver an impressive acoustic performance of 55db Rw, allowing meetings to take place either side of the partition entirely undisturbed.  Finished in a stretched Kvadrat fabric, the moveable walls blend seamlessly with the chic office interior décor. The new Old Bailey offices will provide a vibrant, modern home for the rapidly growing London team of over 1,200 employees. In addition to state-of-the-art collaboration, innovation and audio-visual spaces, the new office encompasses an amphitheatre, study areas and a café. The meeting rooms have been named by employee polls, reflecting Mazars’ international and sustainability culture.“Office space in major cities comes at a premium and this is a great example of how you can get the most out of your meeting areas by adapting them for groups of different sizes,” said Michael Porter, Style’s group sales director. “The semi-automatic Variflex is an exceptional moveable wall of the highest quality and is effortless to manoeuvre into position, which means the space can be easily changed several times a day if necessary.” This was the second time that Style had been chosen by Mazars, having previously installed a glass moveable wall at their offices in Chamberlain Square, Birmingham.

Vicky and Nick, the owners of Holloway and Holloway, a London based architecture studio, share their story on living and working under the same roof, in a stunning recently extended house where they added an Unlimited Rooflight. Questions to Vicky and Nick:What was the decision-making trigger in choosing daylight from above?To be honest there was no choice here. In a London mid-terraced property, even a semi-detached one, when you do a side infill to increase the rear of the property by filling in the gap between the properties, it creates a dark space in the centre of the property where there is no natural light.So, you generally counter this by adding roof lights in the ceiling over the new extension, and make sure that they are placed fairly close to the back of the room so that you can flood that space with natural light.Vertical windows tend to allow a good level of natural light to penetrate around 6 meters into a building. Not only do roof lights allow a lot more light in a space than a vertical window, but as you can place these in more central areas in the room, they are nearly the only way to get daylight into the centre of your house.We have our office in the central room of the property, so for us, we had to have good natural light levels in this area as we spend the most amount of time here in the whole house.You added a rather large rooflight to your extension - The Unlimited Rooflight. What impact does it have on the space?It is amazing how bright the space is. We get so much light from above that the space always has a wonderful vibrance to it during the daytime.But I think that possibly what’s even more striking than the amount of light itself is the size of the glass, its 5m² total, split into 2 pieces. It makes it feel as though there is more glass than there is solid roof up there, it really is the wow feature of the whole space.Whilst we had expected that when we designed it as it was always meant to be the feature in the room, what we hadn’t realized was how much it would make the space feel bigger. With extensions on a mid-terrace property, you are often limited as to how high you can build so your ceiling height can be capped at a certain level, but having this huge opening in the middle of the room makes the whole space feel like you’ve got this really grand ceiling height, it has such an effect on how the space feels. Tell us what was the timeline from inspiration to finished interiors? I'm sure it's a question you get very often.Indeed. Well we actually only found out about Vario by VELUX as we were on site, they were just about to start the roof construction as we found out about them, so we didn’t have a huge amount of time and had to get things organized very quickly! From finding the products to getting them on site it was only a matter of weeks, once we had chosen a size for the roof lights all we had to do was confirm the opening dimensions to our contractors, and double check with the structural engineer that the roof structure was ok to support the new roof light. Once that was all sorted all we had to do was wait, it was a very easy process. The project took around 4 months on site in total, but the roof lights go in fairly near the end of the project, so once they’re in it’s all very exciting, as you are close to completion.  

Column mounted perimeter safety barriers for the upper desk and ramp of a two storey shoppers’ car park.

As part of our involvement in this project we supplied a bespoke reception desk and a variety of fire-rated door-sets.

St. Modwen is a logistics and housebuilding developer with a rich 30-year history. At the head office in Birmingham, partitioning expert Style worked with contractor, Claremont, to offer flexibility in the meeting and training room.Separating the space, a Dorma Hüppe Variflex solid moveable wall was chosen as the best solution. Creating an impressive 55dB acoustic divide, meetings and training sessions can take place either side of the wall without any sound interference.With a chic, white finish, the wall complements the simple, clean interior décor and, thanks to the quality of all Dorma Hüppe moveable wall solutions, it can be opened and closed smoothly and effortlessly to divide the space when required.St. Modwen has over 700 employees and operates across two dedicated business units: St. Modwen Homes is an award-winning housebuilder whilst St. Modwen Logistics, deliver and manage future-proofed warehousing and logistics spaces where businesses can thrive. Aiming to support their core values, the refurbished head office embraces modern workplace principles, offering a variety of flexible and productive spaces perfect for collaborative endeavour.“As the UK’s market leading specialist, we offer a range of moveable, folding and partitioning walls for all requirements and budgets,” explained Steve Williams, Style’s sales director for the Midlands.“This is a great example of a practical solution that offers St. Modwen staff the ability to change the use of the space multiple times a day, if required, and get the most out of their meeting and training room by being able to cater for gatherings of different sizes.”Style is the exclusive UK partner to Dorma Hüppe, Skyfold and SWG and is a 12 times winner of the prestigious FIS Contractors Gold award. Essential for anyone seeking solutions for BREEAM, LEED and SKA, Style leads the way with sustainable moveable wall solutions and is the only UK partitioning specialist that is accredited under the ISO 14001:2004 Environmental Management System.

Rawson’s Fanfare range has been chosen in 2 distinct colours for the Key Assets office project in Birmingham. The result is a covering which meets the planned aesthetic and offers a soft, quiet and comfortable surface. Rawson Carpet Solutions have been supplying the office and Education sectors for over 50 years. As the markets have evolved, so too has the product range and customer support. Hannah Sidley of CB Interiors stated: ‘We were looking for a heavy contract carpet which worked with our design concept portraying a contemporary look. The Fanfare Range supplied by Rawson carpets provided this, being solution dyed nylon and with BRE A+ environmental accreditation. Plus being fully supported as a UK manufacturer we were confident about meeting the deadline as the supply wouldn’t be an issue. Fanfare is a range that can be laid tessellated or broadloom, the result is a tile which offers the aesthetics of a seamless, monolithic floor. The sinuous look complements the space and offers great durability with castor chair resistance. The contract carpet tile is constructed using high grade solution dyed nylon and as such offers great cleaning results. Rawson values the Environment. All considerations for ethical trading down the manufacturing and supply line and the responsible choice of REACH compliant materials is paramount. In addition, carpets are provided with the BRE Green Guide Individual assessment, achieving A+ and this offers clients the assurance of an environmentally conscious product and manufacturer. Indeed there are products in the range that are fully recyclable. WE Rawson, A UK Company since 1865, is ISO9001:2015 accredited with 3 divisions and a heritage past as a reputed long standing privately owned UK Manufacturer.

If any company knows about good investments, it’s multinational investment and financial services firm, Morgan Stanley, who made the shrewd decision to switch to more cost-effective hand dryers from the summer of 2022.Units Supplied: 15 to date, with plans to supply moreKey Benefits: Energy efficient, cheap to run and good looksRated Power: 0.8kW - 1.65kW | 2.67 - 4.58 Wh per dryProjectThe UK branch of the international firm, with offices in London and Glasgow, was previously using the Dyson AB14, until its buildings managers crunched the numbers and realised there were many cost savings to be achieved by moving to more energy-efficient hand dryers.SolutionMorgan Stanley’s workplace solutions provider, CBRE, approached one of our electrical wholesaler partners, Edmundon’s Electrical, to source the perfect hand dryers. We worked closely with the wholesaler to help them arrive at the ideal solution – the Dryflow Steelforce Hand Dryer. This popular, hands-in dryer, designed for high-traffic areas, can provide 1,875 dries per just £1 of electricity, whilst offering reliability and certainty… in the washroom at least.The Dryflow SteelforceWith famously fast dry times, this dryer is made for busy, fast-paced environments where time is money. It even features a guiding light to help the user maximise the powerful airflow for optimum efficiency.Its sleek, stainless steel lines allow it to fit in the most prestigious of washrooms, and it can certainly give the Dyson Airblade AB14 a run for its money, both in looks and performance that would normally be associated with a much more expensive dryer.The design team behind the Dryflow Steelforce Hand Dryer have created a unit with second-to-none efficiency that’s cheap to run, great value to purchase, and is built to last. It comes with market-leading guarantees and a robust build that will keep it running and running, with limited need for maintenance.

With views overlooking central Manchester from several floors up, the designers for this workspace have utilised glazed partitions throughout to maximise the transfer of light and make the most of the stunning backdrop offered by the city skyline.London Wall was approached to provide a glass moving wall system that could seamlessly integrate in to the overall design of the space by matching the proposed glass partitions, while offering space flexibility.Our Type G200 system was the perfect choice, with a crittal effect indention to the static panels on show elsewhere within the space. The glazed panels can quickly and easily be stacked, allowing staff the choice between a single, large open plan space or two smaller spaces.When the panels are in use, the two spaces both remain easily accessible thanks to a lockable pass door. Type G200’s impressive acoustic performance ensures that sound transfer between the two spaces is kept to a minimum, therefore reducing noise distraction and increasing privacy.

The award winning building has been designed to blend within the context of the Victorian sea side town but also be a contemporary feature to signal a brighter future for the town and has been designed to achieve a BREEAM rating of Excellent and an EPC rating of A.The four storey building has been designed with Aluprof MB-SR50N and MB-SR60N curtain wall systems around a central atrium space which distributes natural daylight through all working areas of the building from the external facade which also incorporate feature fins and MB-59S windows.Architect: AHRDeveloper: MUSE

In the project, we applied the latest Rockfon products that combine contemporary design trends with investors' expectations. They perfectly integrate into the interior, creating a decorative element with an additional acoustic function. They offer the possibility of any customization -- in terms of size, colour, shape, and application on various surfaces.

Vtec was specified to provide feature ceiling beams using our MaxiBeam raft above an informal seating area in the large social space. Finished in a special Oak laminate, the raft’s interesting geometry follows the shape of the building and draws the eye. No two beams are the same; each was individually shaped and sized to perfectly fit the perimeter. Our Technical Team provided detailed set out dimensions to ensure correct positioning of the MaxiBeams for smooth installation, with the outcome that every single one of the feature ceiling beams is fully removable using our Click-Fix method.