"non relocatable partitions"

The Project Renovation of the community centre has been made possible with the support of funders, volunteers, local businesses and charitable trusts.Around £1.2m has been raised to repair, refurbish and extend the building.The centre will cater for the needs of the positive, vibrant and diverse community coming through the doors.The ChallengeThe project was managed by the church and community inclusion was a key driver on this project.Parishioners, local businesses and the community on the whole are extremely proud of their roots and keen to celebrate them.The local woodland was chosen for the finish on the cubicles and photographs were taken and used to create a digital laminate.The challenge for the photographer was getting the right shot. The washroom space is actually quite small in the centre. The SolutionThe diversity of the community enabled the centre to be creative when designing the washrooms and drawing on the beauty of the local area they decided to install not only a Grade A system but chose a serene digital print which is both innovative and thought provoking. The inspired woodland theme has created a taking point amongst the patrons and is admired and loved by all.Feedback from the client:“It's also worth a day out just to visit our toilets, after decades of nastiness we are proud to have the finest toilets for miles around! We love them loos!”SpecificationProduct Range: Flush 44 HPLDoors: Digital Print HPLPilaster: Digital Print HPLPartition: High Digital Print HPLIronmongery: Stainless SteelAvailable Finishes:These Systems Are Available In The Following Finishes:Natural Wood VeneerHigh Pressure LaminateHigh Gloss Laminate

The Project Four stories of retail and office units in the heart of the city forming part of £139m redevelopment.  Quality & sustainability are key features of this building and the construction to BREEAM excellent standards make it one of the most sustainable buildings in the city. Retail units placed on the ground floor and three levels of Grade A office space above believed to be the first in Wolverhampton. The Challenge Within budget limitations produce a Grade A washroom befitting the buildings design and sustainability drivers. Keep the washroom systems off the floor and work above the height of the coving to create an opulent washroom décor. Design a bespoke vanity, concealing the pipework but not the waste and trap plus carry the weight of Solid Surface countertop and bowls.  The SolutionExcelsior Flush 30 Cubicles provide the opulence desired by the client whilst meeting the budgetary requirements of the project. Projected 150mm off the floor with stainless steel legs and ironmongery keep the cubicles clear of the coved flooring. Manufacture hybrid vanity units to carry the weight of the tops and sinks whilst allowing the chrome waste and traps to be a focal point. Delivered inline with our own business sustainability drivers, all of the washroom components are finished in Polyrey. Polyrey have a strong environmental ethos including: The Life Cycle Assessment (LCA), ISO 14001, PEFC, Chain of Custody in line with FSC.                                                               SpecificationProduct Range: Flush 30 HPLDoors: Polyrey N026 Noyer OmbrePilaster: Polyrey G029 Gris TourterellePartition: Polyrey N026 Noyer OmbreIronmongery: Stainless Steel

Knowle C of E Primary School in Solihull has undergone phase two of their major washroom refurbishment. Phase two of the refurbishment included additional washbasins, taps and final installations such as lighting and flooring. As one of the chosen washroom manufacturers in the final phase, Franke Water Systems provided:·        1 x SOLX1800T Miranit washtrough ·        3 x F3SV1001 self-closing tapsThe washtrough and taps were provided to complete the final phase of the project. Maintaining a high standard of hygiene is a key element to consider when specifying school washrooms. Franke’s composite washtroughs and basins are seamlessly moulded in Miranit, an advanced resin and granite composite with a gelcoat, providing a non-porous, robust and hygienic finish. Miranit is several times stronger than ceramic, highly impact-resistant and virtually shatter-proof, making it ideal for busy school washroom environments. Also provided were three F3 self-closing taps, the F3S range of taps combine functionality, robustness, and maintenance-friendly design which is ideal for highly frequented school washrooms.  

Privacy glass on a balcony is becoming a more frequent request. This installation by AC Fabrications in Cornwall on a domestic property perfectly displays how a glass privacy screen can be used. The partially frosted glass increases privacy for those on the balcony, people at ground level will not be able to see them. The non-frosted section allows the residents to enjoy their view from the privacy of their balcony. Taller glass on one side extends the privacy even more, and also will act as a windbreak. Frameless glass balustrade is often used as a windbreak on balconies, the solid pane of glass protecting those on the balcony. The installer has used POSIglaze base fit Silver brushed channel. Designed to provide the greatest possible adjustment opportunities, this system enables each panel to be perfectly aligned during, or even after, installation. POSIglaze is the perfect choice for residential to light commercial installations where up to 1.5kN frameless glass balustrade is required. This innovative patented and market leading screw-clamp technology locks glass panels into position effortlessly, with four immobilising fasteners per meter of channel. 

Durability, safety and aesthetics needed to work together for the Viking House project. With the refurbishment nestled among conventionally built brick buildings there was a need for a contemporary look that mirrored the local vernacular. Viking House is a managed student accommodation development at the University of Lincoln. Made up of three five-storey buildings and standing 20m tall, it was designed to reflect the university’s continuing progress. Converted from several repurposed properties, the design of the buildings was in contrast to others in the largely traditional area of Brayford Wharf.One of the main challenges was the University’s desire to complete the project within only six months in order to accommodate the new intake of students at the start of the 2018/19 term, but without compromising on safety.Working in partnership with the Globe Consultants, Ash & Lacy proposed the use of its exclusive MechSlip façade. Developed in conjunction with Ibstock Kevington, MechSlip is a lightweight, mechanically fixed system that offers significant advantages including reduced installation times and associated costs, as well as being completely non-combustible and classified A1 to EN 13501-1 standards.

For almost a decade, ESCREO whiteboard paints have been helping companies transform their workplaces, making them more creative, organised and open to collaboration. Creativity and innovation are embedded in the DNA of the company and its team from the very beginning. Thanks to this, they manage to find a solution to a problem that negatively affects our productivity and well-being, namely poor air quality. This is how ESCREO Clean Air was born - the latest addition to ESCREO's carbon neutral portfolio of functional paints. ESCREO Clean Air is an interior air purifying paint, which reduces air pollution by more than 90.1%. One of the magic components is an enhanced mineral which attracts and neutralises harmful pollutants, incl. VOCs, odours, air chemicals and CO2. The non-toxic environmentally friendly water-based formula is a great collaboration between modern technology and a clever "problem-solving" approach, through which ESCREO can help commercial building owners use hitherto passive areas such as walls to further purify the air indoors, making the premises more attractive to current and future users.

Cambridge Biomedical Campus. (CBC) created a vibrant and groundbreaking health care community at the forefront of science and medicine.Dortek’s brief was to supply and installation of doors to a very specific programme, across primarily 3 floors.Our Dortek doors were installed within the BRF rooms, laboratories, holding room, procedure rooms, CL3 labs, equipment store, changing rooms, and circulation routes. The type of doors we installed were GRP hinged and sliding in stainless steel frames, many with integrated privacy panels.SolutionThe particular project requirements that made our doors suitable was the durability, acoustic performance, non organic door quality of our SS frame which ensures suitability to this environment. The SS frame had previously been used at Francis Crick Institute also. We fulfilled the clients expectations by meeting the specification and programme, and working closely with planners to interface with other trades. There was some complexity about the project as most doors are very large for equipment access and some have acoustic requirements, also to include is there are a lot of doors in a concentrated area.

An existing Mews dating back to the 1860’s in close proximity to the Victoria and Albert Museum. The highly sensitive nature of this site required NLA to work closely throughout the planning and construction phases with LBKC to make sure the ambitious yet sympathetic design, bespoke to the client’s requirements was realised. In addition to a full refurbishment, complete with new basement, reworked layout and contemporary interior design, a double height atrium was introduced at the heart of the dwelling allowing natural daylight to permeate throughout each individual level whilst providing a secluded garden sanctuary away from the bustling streets of London.For this refurbishment, our Una was used which are the solution for timber leaf risers. Una utilises a timber door leaf with a concealed metal frame. Made to suit custom sizes, provided as a flat-packed kit prepared for all ironmongery. The wood door leaf comes with hinge cut-outs and can be primed for on-site finishing or pre-finished in our factory. Choose from non-fire rated or fire rated to E30 or E60.

Two shades of blue, light and dark, formally in glass panels, needed to be replicated when the glass was removed and replaced within areas of the rainscreen façade and spandrel panels across all levels of a student accommodation tower block in Kings Cross, London.Powdertech was sent shards of blue glass from the old windows, to match with a powder coating both in shade and gloss level. Working in close contact with the client Powdertech directed one of its powder manufacturers to make two unique shades of blue to match the old glass in both colour and gloss. Powdertech coated 4500 sq m of aluminium spandrel panels of sizes ranging from 350mm by 2500 mm to a larger size of 900mm by 4500mm.The non-combustible cladding panels are designed to help prevent fire damage quickly and easily spreading as part of the system. They perform to technical criteria, sound insulation and thermal performance and reduce environmental issues. Powdertech’s powder coatings and application techniques all conform to reaction to fire rating A2-s1,d0, thus contributing to the fire safety of the panels

A range of Ultima aluminium insulated panels incorporating an eye catching perforated outer skin have been specified on the new Reflector residential development at Chambers Wharf in The Southwark district of London. Designed by Simpson Haugh Architecture the properties featured over 1500 sq metres of Ultima aluminium insulated panels glazed in to the structural glazed system across multiple buildings on the development. Each of the panels were finished in a distinctive Basalt Grey PPC colour, that featured a unique perforated outer skin which stood proud of the glazed in panel. These were fitted via a toggle system together with an internal channel surround that added to the distinctive appearance of the building. Ultima aluminium insulated panels are a highly versatile façade panel that can be adapted to fit a variety of external applications. Available in sizes up to and including 6000mm x 2000mm, Ultima panels are fire tested to BS476, provide excellent thermal performance and are supplied with A1 non-combustible insulation materials. They are available in a wide range of high grade anodised colours and PPC finishes.

11 High Baxter Street is within the Town Centre Conservation Area and is located in one of the streets which make up the Norman planned town set out on a grid system in the 12th Century. It is however a sole survivor, the rest of the street having been demolished in the 1960’s.The property has a core dating back to the 15th Century, with alterations in every century after. By the end of the 20th Century however, having survived 500 years, it was distinctly unloved, had become flats, then eventually a semi-derelict squat.In January 2019 the Bury St. Edmunds Town Trust (BTT) had come to its rescue, completing the pur- chase of the building and drawing up plans for the conservation and restorationA detailed condition report was carried out by local RIBA conservation architects Whitworth.Best of Lime’s Warmcote insulated lime plaster was specified as the base coat, with our Limecote tra- ditional chalk/lime plaster as the finish. Both products are non-hydraulic and designed to cope with the extreme background movement of an historic timber frame.

The Anchorage Gateway in Salford Quays is a new multi-storey building in the centre of Salford. The main wing is 29 storeys high whilst the lower tower tops out at 19 storeys. The ground floor contains almost 400m2 of commercial space and the upper floors contain 290 residential units and 800m2 of amenity space.The building is reputed to be one of the highest brick clad buildings in Europe, Kinlan Brickwork being specialist sub-contractor.Domis Construction is the main contractor on this scheme. URSA UK Ltd was chosen as the preferred insulation manufacturer. We supplied over 11,500m2 of 100mm URSAPAN BLACK - a unique glass mineral wool rainscreen cladding insulation slab;·      Euroclass A1 fire rating (non-combustible).·      Thermal conductivity of 0.035 W/mK.·      BBA Certified. Kate Fox, Area Sales Manager for the Midlands stated, ‘Following the success of this initial partnership URSA are now the preferred supplier of rainscreen insulation and our products have been used on Fifty5ive Queen Street in Salford with others in the pipeline including Derwent Street’.

A large commercial client of EnviroBuild required a contemporary and low maintenance decking solution for their purpose built flat refurbishment project in South London. The decking would be supported over a flat roof surface, plug on balconies and garden decking areas, so required a versatile decking bearing system.The SolutionThe project used 400 m² of Hyperion Granite Pioneer decking installed on a sub-frame made of non-rot Manticore recycled plastic lumber. To support the decking over the low profile balconies and taller flat roof sections, adjustable decking supports were used. The various sizes of pedestals, allowed both very shallow decking heights and other sections to be supported securely with minimal installation time.Customer FeedbackThe client loved the look of the Granite Pioneer decking against the classic redbrick building. Combined with the modern glass balustrade, they created the perfect outdoor living spaces.Project DetailsSize: 400 m²Product: Granite Hyperion Composite DeckingSubstructure: Mesa Adjustable pedestals & Manticore Plastic LumberLocation: London

Eastbourne station is located in East Sussex. It was originally built in the 19th century and is classified as a Grade II listed building. Over the years, the station has undergone several renovations and upgrades.Back in October 2020 it was announced £5 million would be spent on restoring Eastbourne Railway Station to its ‘former glory’. Work done includes canopy refurbishment, slate roof replacement, masonry work to the front of the station, and new roofing above the atrium.Twinfix were approached to replace the glazing panels on the 32 lanterns on the station’s train shed with something hard wearing, sustainable and modern but without losing the period look. The change was needed because, according to the plans, the existing fixtures were ‘life expired and inefficient’.Twinfix supplied their Multi-Link-Panel Non-Fragile (NF) roof glazing system, glazed with 6mm solid obscure polycarbonate. The new glazing spanned 1243 square metres and was installed by Gable, on behalf of Main Contractor BAM Nuttall.The Multi-Link-Panel NF system is an innovative roof glazing product that has been well utilised for many years on station canopy roofs, and it has been thoroughly tried and tested in that time.It was the chosen system for this project for a number of reasons:sustainability– these panels are virtually unbreakable in manufacture, transit and in situ, meaning that, unlike glass, maintenance costs will be eliminated. The system is also completely recycleable.safety– Twinfix Multi-Link-Panel NF (Non-Fragile) conforms to the HSE recommended test method ACR[M]001:2019 (as outlined in document HSG33) and achieves a ‘B’ Classification.off-site construction– The panels are pre-assembled in Twinfix’s factory ensuring strict quality guidelines are adhered to, which is not always guaranteed when roofing products are assembled on site.ease of access– The Multi-Link-Panel NF system can be fitted with In-Line Access Hatches, to allow cleaning of gutters and roof. These hatches are hardly visible and allow safe access through the glazing without needing to get on the roof.weight– The Multi-Link-Panel NF is light in weight and due to its modular format, it is very quick to install which allows for short rail possession works. A slight redesign of the original roof allowed 96 access hatches to be installed, making maintenance easier. Installed it’s almost impossible to detect the modern materials that have been used to bring this historic structure back to life.During the renovation work, Shaun King, Sussex route director for Network Rail, said, “The quality of work on site is being completed to a very high standard and we’re taking great care to restore the Grade II listed building to its former glory.”

Eastbourne station is located in East Sussex. It was originally built in the 19th century and is classified as a Grade II listed building. Over the years, the station has undergone several renovations and upgrades.Back in October 2020 it was announced £5 million would be spent on restoring Eastbourne Railway Station to its ‘former glory’. Work done includes canopy refurbishment, slate roof replacement, masonry work to the front of the station, and new roofing above the atrium.Twinfix were approached to replace the glazing panels on the 32 lanterns on the station’s train shed with something hard wearing, sustainable and modern but without losing the period look. The change was needed because, according to the plans, the existing fixtures were ‘life expired and inefficient’.Twinfix supplied their Multi-Link-Panel Non-Fragile (NF) roof glazing system, glazed with 6mm solid obscure polycarbonate. The new glazing spanned 1243 square metres and was installed by Gable, on behalf of Main Contractor BAM Nuttall.The Multi-Link-Panel NF system is an innovative roof glazing product that has been well utilised for many years on station canopy roofs, and it has been thoroughly tried and tested in that time.It was the chosen system for this project for a number of reasons:sustainability– these panels are virtually unbreakable in manufacture, transit and in situ, meaning that, unlike glass, maintenance costs will be eliminated. The system is also completely recycleable.safety– Twinfix Multi-Link-Panel NF (Non-Fragile) conforms to the HSE recommended test method ACR[M]001:2019 (as outlined in document HSG33) and achieves a ‘B’ Classification.off-site construction– The panels are pre-assembled in Twinfix’s factory ensuring strict quality guidelines are adhered to, which is not always guaranteed when roofing products are assembled on site.ease of access– The Multi-Link-Panel NF system can be fitted with In-Line Access Hatches, to allow cleaning of gutters and roof. These hatches are hardly visible and allow safe access through the glazing without needing to get on the roof.weight– The Multi-Link-Panel NF is light in weight and due to its modular format, it is very quick to install which allows for short rail possession works. A slight redesign of the original roof allowed 96 access hatches to be installed, making maintenance easier. Installed it’s almost impossible to detect the modern materials that have been used to bring this historic structure back to life.During the renovation work, Shaun King, Sussex route director for Network Rail, said, “The quality of work on site is being completed to a very high standard and we’re taking great care to restore the Grade II listed building to its former glory.”

CHALLENGEWestfield, the world’s largest listed retail property company, is set to change the face of retail in the United Kingdom with the opening of its new flagship development – “Westfield London” – at White City, London.Beneath a spectacular, undulating glass roof, the £1.6 billion Westfield London destination combines over 150,000m2 of retail, restaurants, cafes, bars and leisure facilities to create the ultimate shopping and leisure destination.Westfield London will act as a catalyst for the redevelopment and regeneration of the wider White City area with a further £1billion investment expected in the immediate vicinity over the next 10 years.SOLUTIONKnauf Insulation supplied Rocksilk® RainScreen Slab as part of the rainscreen cladding system to the external stone clad façades of the development and internal stone clad stairwell and elevator areas. The specification of Rocksilk® RainScreen Slab provided both performance and installation benefits to both client and specialist installing contractor.Rock Mineral Wool has a Euroclass A1 reaction to fire classification to BS EN ISO 13501- 1, the highest classification available. With rainscreen cladding incorporated into building design fire performance is particularly important and, as such, a non-combustible component such as Rock Mineral Wool provides the ideal prevention against the spread of fire. The non-combustible nature of rock mineral wool ensures that it will not burn, will not give off toxic smoke and will not suddenly ignite in a fire due to ‘flashover’.Another key specification element related to the speed and ease of installation. The required thermal performance of the building was dependent on the correct installation of the specified insulation product. Rocksilk® RainScreen Slabs are easy to install down to their superior workability ensuring installation stayed within the tight time constraints. Rocksilk® RainScreen Slab is treated with a water repellent additive to ensure the building structure is protected against rain penetration and it can also be installed with either face adjacent to the sub structure.Rocksilk® RainScreen Slab provides an additional benefit for the installing contractor as it is designed to adapt to minor imperfections in the building’s substructure. The rock mineral wool product ‘knits’ together, ensuring intimate contact between slabs ensuring all joints are closed and thermal efficiency is maximised.Rocksilk® RainScreen Slab has excellent acoustic properties, which contributed towards the acoustic performance of the structure in order to comply with both sound insulation and sound absorption requirements.What’s more, individual packs of Rocksilk® RainScreen Slabs are compression packed together in Knauf Insulation’s innovative packaging method, Supakube. The advanced compression technology and strong packaging materials ensure the product is easy to transport and store, reducing environmental impact and causing minimal disruption on site and the surrounding area.

ChallengeFor the air traffic controllers at Birmingham Airport, concentration is critical to ensuring the safety of the hundreds of passenger jets that take off and land every day. Studies show office workers lose concentration when noise levels hit 55dB; however, the sound of just one medium-sized aircraft descending at 1,000ft is 70dB.SolutionWith this in mind, noise reduction was an essential factor in the specification of the insulation for the 105ft air traffic control tower. The airport’s developers consulted Knauf Insulation’s Technical Support Team for advice. The Technical Support Team recommended Rocksilk® RainScreen Slab, a non-combustible Rock Mineral Wool insulation designed for use in high-rise rainscreen façade systems.Mineral Wool insulation has superior acoustic performance because of its open structure, which traps sound between the individual strands and turns it into heat energy.Rocksilk® RainScreen Slab is quick and easy to install and adapts to minor imperfections in the substrate. Slabs are flexible and knit together eliminating air gaps for maximum acoustic and thermal performance, making it perfect for use on the curved walls of the funnel shaped control tower. The same level of acoustic performance could not have been achieved with rigid foam boards, which have closed cell structures that offer virtually no sound absorption. Rigid foam boards are also more prone to air gaps, reducing acoustic performance further.As well as excellent acoustic and thermal performance, Rocksilk® RainScreen Slab is non-combustible with Euroclass A1 reaction to fire classification. This means it will not contribute to the spread or development of fire should it occur.Another factor in the specification of Rocksilk® RainScreen Slab was sustainability. It is manufactured with ECOSE® Technology, Knauf Insulation’s unique bio-based binder, which contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable, and is 70% less energy-intensive to manufacture than traditional binder, so it is more environmentally friendly. Products made with ECOSE® Technology generate low levels of dust and VOCs, and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort.Thanks to Rocksilk® RainScreen Slab the air traffic controllers at Birmingham Airport can enjoy a quieter, warmer, safer and more sustainable workplace."Acoustic protection, energy performance, fire safety and sustainability were all crucial factors taken into account during the design of the air traffic control tower and so all materials specified with the project needed to meet these multiple requirements. We are extremely pleased with the building."Will Heynes, Birmingham Airport’s Development Director

The German company Knauf Integral was able to prevail against competitors with its GIFAfloor DB green raised floor system. A maximum flexible and individual floor due to the interchangeability of the individual panels, a non-combustible building material with A1 classification and the unproblematic recycling due to the lack of plastic edging, as is used in conventional raised floor elements, were decisive for the selection.Flexibility, health in the workplace and sustainability in construction - the 'Tour Alto' in Paris La DéfenseIn the Paris suburb of Courbevoie, in the office district of La Défense, the foundation stone was laid for the 'Tour Alto' - a 160 m high skyscraper which, after its planned completion in 2020, will have a usable area of 51,200 m2 next to countless offices, numerous restaurants, bars and fitness studios etc. will accommodate. For the floor structure, the property developer decided on the double floor 'GIFAfloor DB green' from Knauf Integral, paying particular attention to the aspects of flexibility, health, environmental protection and sustainability in buildings.The 'Tour Alto' office tower in the west of Paris extends over 38 floors and is part of the high-rise backdrop of the La Défense office district. Nevertheless, Bouygues, one of the largest property developers in the world, is setting new standards in construction: installed products not only have to be as flexible as possible in their design and use, they also have to meet high standards of sustainability and environmental compatibility as well as the highest health standards for people, who will do their jobs there every day.A maximum flexible and individual floor due to the interchangeability of the individual panels, a non-flammable building material with A1 classification and the unproblematic recycling due to the lack of plastic edging, as is used in conventional raised floor elements, were decisive for the selection.In addition, health and environmentally friendly aspects were the absolute focus of the project for the property developer: The selected product must contribute to excellent indoor air quality and all materials that come into contact with the indoor air should have A + according to French in terms of VOC and formaldehyde emissions Emission class to be rated. GIFAfloor DB green elements have exactly this A + certification - the decisive advantage compared to the commonly used raised floors with chipboard supports that contain formaldehyde. Independent (building) biological analysis laboratories also prove the excellent quality through their tests: Eurofins certifies the product as suitable for indoor use, and the Institute for Building Biology in Rosenheim gives the verdict " recommended ''. This ensures a healthy working environment for employees.With GIFAfloor DB green, Knauf Integral offers a sustainable and health-friendly double floor solution for flexible, high-quality commercial interior design. The elements consist of the homogeneous gypsum fiber material GIFAtec and are available in different thicknesses depending on the requirements.

Coláiste an Chláirín Bauder Thermofol single ply waterproofing system with BauderROCK insulationSynopsisThe new Coláiste an Chláirín building in Athenry, Co Galway is a post primary school consisting of classrooms, a special needs unit, sports hall, general-purpose hall, staff amenities and extensive external facilities designed by Smith Kennedy Architects & Healy Partners Architects. The project was managed by JJ Rhatigan and Company and the roofing element appointed to Priority Roofing and Cladding Ltd. The roof of the main building and the gymnasium required flat roof build-ups to meet the specifications as set out in in SDG 02-05-03 (Acoustic Performance in New Primary & Post Primary School Buildings), while meeting the general performance requirements specified within TGD 021-7 2018 (Minimum Performance Standards of Roof Materials and Finishes). The chosen system had to meet an acoustic performance of 35dB indoor ambient noise level (IANL). It was decided that, despite sports halls having a slightly higher IANL threshold, the 35dB performance criteria would be applied across all areas of the school, with control of reverberation being a key consideration in the gym.Bauder Building BoardProject:Coláiste an ChláirínLocation:County GalwayProject type:New BuildRoof size:8550m²Main contractor:JJ Rhatigan & CompanyApproved contractor:Priority Roofing & Cladding LtdThe specification:The Architect specified that the insulation used in the flat roof system should be non-combustible and achieve a U-value of 0.16Wm²k which actually exceeds the thermal requirements as described in the Irish Building Regulations Technical Guidance Document L for flat roofs in schools.BauderROCK was specified to achieve the thermal and acoustic requirements of the design. As a Euroclass A2-s1,d0 non-combustible material, BauderROCK also provided the specified fire performance. This insulation could be used across all roof areas, with some adaptations for the gym which required additional acoustic performance due to the inherent nature of the space. Acoustic infills were used in the troughs of the perforated metal deck, thus combatting the reverberation of the indoor environment.  Products appliedBauder Thermofol PVCAn integrated single ply waterproofing system, featuring a lightweight, cost effective membrane which offers a pleasing aesthetic finish on a flat roof. This system holds fire classification BROOF(t4) for compliance with building regulations under TS 1187 test method 4 for external fire exposure to roofs. BauderROCKHigh density mineral wool insulation.Project challengesOne of the challenges of this project was the ambitious schedule. The use of the self-adhesive air and vapour control layer (AVCL) enabled the trades working within the building to progress quickly without being delayed by weather conditions. BauderROCK is relatively quick to install, as was the lightweight single ply waterproofing.  The resultThe project was finished to time and specification with exceptional workmanship from the fixers at Priority Roofing and Cladding and superb collaboration from all parties throughout. The membrane was finished with standing seams to create a statement look. The roof achieved a U-value of 0.15 W/m2k, exceeding the thermal target, and met or exceeded the 35db IANL requirement across the main building and the sports hall.  The thermal performance, which will hold up for decades to come, will also impart energy efficiency benefits that reduce running costs at the school in the long term. Finally, the non-combustible nature of the mineral wool insulation ensured that the build-up met the fire safety specification. System installed Bauder Thermofol PVC single ply waterproofing system1 Bauder THERMOFOL U15 V FRThis 1.5mm polyester reinforced Poly Vinyl Chloride membrane (PVC) membrane benefits from being highly flexible due to the incorporation of internal plasticizers during the manufacturing process. The combination of materials within this membrane provides high tensile strength, with thermal stability and chemical resistance.2 BauderROCKA mineral fibre non-combustible insulation with high acoustic performance. The dual density mineral wool composition delivers compressive strength, whilst keeping the overall weight to a minimum and providing high noise absorption which enabled the complete system to meet project requirements.3 BauderTEC DBR 06This 0.6mm, self-adhesive, elastomeric air and vapour control layer is light weight and benefits from cleaner, safer, and faster installation than traditional torch applied membranes. Advocacy Niall Hanley, Contracts Manager at JJ Rhatigan, the project’s main contractor, said:"Coláiste an Chláirín Athnery was a great success and in particular the use of the self-adhesive AVCL in advance of the build-up allowed works to commence immediately internally, which was critical from a programme perspective.” Kevin Ryan, Director at Priority Roofing, explained:"We found the system both practical and efficient to install. The combination of the availability of the products and the technical backup received was superior to any other system that we have worked with.”  Eoin O’Grady, Associate Director at Healy Partners Architects commented:"We are delighted with the overall delivery of the roof build-up and the performance achieved. The PE hall solution to deal with reverberation noise as well as rainfall noise was very successfully managed. We look forward to working with Bauder on future projects.” 

Fastlight Direct have undergone a refurbishment of their washrooms and chose Franke Water Systems as one of the chosen washroom manufacturers. Products provided included:2 x ANMW411 single Quadro Miranit Washbasins1 x ANMW421 double Quadro Miranit Washbasin 4 x F3SV1001 self-closing tapsMaintaining a high standard of hygiene is a key element to consider when specifying any washroom project. Franke’s Miranit composite wash basins are seamlessly moulded in Miranit, an advanced resin and granite composite material with a gelcoat layer, providing a non-porous, robust and hygienic finish. Miranit is several times stronger than ceramic, highly impact-resistant and virtually shatter-proof, making it ideal for busy washroom environments. The F3S self-closing taps are perfect for reducing water consumption with its proven piston-free self-closing water control. These highly durable self-closing F3 taps have been tried and tested over a million times, ensuring a long-lasting solution. The push cap is light and easy to use, with adjustable flow stop time for a one push operation.

Accessible toileting facilities are crucial in public spaces to meet the diverse needs of individuals. Changing Places toilets, such as the modular Care Capsule™, provide a portable and adaptable solution for those with disabilities, ensuring they can enjoy their outings comfortably. A recent project with the Sussex Wildlife Trust exemplifies the effectiveness of Care Capsule™ in upgrading existing facilities. Despite space constraints in the visitors and education centres, a modular unit was swiftly installed adjacent to the main building, offering accessibility without the need for extensive construction within pre-existing structures.The project, initiated in January 2023, aimed for completion by the end of March 2023. The tight timeline was met through efficient processes, including a prompt site survey, proposal acceptance, and swift groundworks. Overcoming challenges like relocating a power cable, the team successfully hoisted the Care Capsule™ into place. The exterior was clad in local chestnut timber to harmonize with the surroundings, while interior features like Altro non-slip vinyl flooring, White Rock welded wall finishes, and height-adjustable units ensured both functionality and aesthetic coherence.

Project: Tobacco DockDate: 2021 Background:·        The existing cladding had been identified as being combustible ACM·        APL had previously designed and supplied a bespoke StrongBak™ structural-framing solution to the project due to its unique historical structural design·        APL were engaged to supply and design additional areas of StrongBak™ along with a complete A1-rated face-fixed flat-panel façade to replace non-compliant cladding (not supplied by APL)·        APL Armacoil™PLUS-HT material was selected due to its exceptional performance in a marine environment ·        APL’s fabrication capability meant that all panels were factory-drilled leading to significantly quicker installation time on site Systems:·        4,000m² of APL Slimwall™-FF face-fixed flat panel in 2mm aluminium with an Armacoil™PLUS-HT coating in RAL 1003·        APL Tritherm™ sub-framing for StrongBak™ area·        APL aluminium AluE™ Tritherm™ helping hand brackets and extrusions to support panel system onto StrongBak™·        All flashings, fixings and accessories  Building Location:·        Liverpool

University Coventry Hospital is situated in the Walsgrave on Sowe area of Coventry and is part of the University Hospitals Coventry and Warwickshire NHS Trust. The hospital opened in 2006, replacing Walsgrave Hospital the original hospital at the site.Twinfix was approached by Principal Contractors William Gough to design, manufacture and install a walkway from the helipad on the first-floor deck to the hospital’s Accident and Emergency department. The requirement was for a robust walkway that was structurally sufficient to withstand the usual weather forces and the down draught from a helicopter in close proximity.Liaising closely with William Gough and designer Pinnegar Hayward Design, the expert team at Twinfix designed, manufactured and installed a 240 sqm free-standing mono-pitch canopy with vertical perforated side panels. This impressive canopy design included lockable double leaf gates to secure the area.The roof comprises of our Multi-Link-Panel Non-Fragile (NF) system powder coated to RAL 5010 – gentian blue and glazed with 16mm multiwall polycarbonate, and the vertical panels were powder-coated to RAL 7037 – dusty grey. As this metal does not rust in use, the walkway will keep its good looks throughout its long life.

Located in Tower Hamlets, Gayton House and Sleaford House are managed by housing association Poplar HARCA. Following amendments to Building Regulations, which banned the use of combustible materials in external walls of high-rise buildings above 18m, StoTherm Mineral K was specified to replace the existing EWI system.BBA-certified, StoTherm Mineral K comprises mineral fibre insulation boards and the system is classified with an A2-s1, d0 reaction to fire in accordance with BS EN 13501-1.Working on behalf of Westminster Building Company, Square 1 Architectural Solutions was responsible for removing the existing EWI and installing the StoTherm Mineral K system onto four elevations on each 23-storey block. The non-combustible mineral fibre insulation boards were secured to the existing concrete substrate using adhesive and mechanical fixings, and without the need for additional expansion joints.A StoLevell Duo Plus reinforcing coat embedded with Sto-Glass Fibre Mesh was then applied to the face of the insulation boards. This was followed by the application of 1.5mm stippled StoSilco, a silicone resin render that provides high levels of water repellence to protect the walls from weathering.

DFV Company realises all their finishes only using Qualicoat approved non-toxic polyester powders. In this regard, the continuous collaboration with suppliers of powder coatings is fundamental, such as Sherwin-Williams, strategic partners in the creation of excellent products and in the research and development of cutting-edge solutions, capable of responding promptly to the changing needs of the market.DFV is an Italian Company with an important international relevance, a leader in the sector of painting for architectural and industrial use.Founded in 1972, today DFV has 3 production units in Italy (Lecce, Venezia, and Agrigento) and 2 abroad (Brazil and Australia). All production sites are equipped with modern painting systems, both vertical and horizontal, and with wood-effect decoration systems that allow DFV to offer a wide range of high-quality colours to several thousand customers as window fabricators, distributors of aluminum profiles, producers, and systems engineers for residential and industrial architecture. The product range of DFV varies from classic and special RAL colours to wood-effect paints and decorations. The core business is represented by the DFV patented EZY and EZY HD2 wood-effect decorations, made using powder on powder technology.

baseTherm® is produced and installed on-site by our local team using our Mobile Floor Insulation Factory - without waste or fuss.�baseTherm® KEY BENEFITS: � Seamless, void-free poured floor insulation� Factory-produced on-site, without waste - using our Mobile Floor Insulation Factory� Rapid pumped installation� Non-combustible� Ultra-lightweight with acoustic benefits� Highly insulating, from 0.041 W/mK� National Standards Authority of Ireland (NSAI) Agrément certified � EPD Certified – available to download on Irish Green Building Council's platform EPD Ireland� Available for spec on NBS Source and as BIM Digital ObjectsContact your local team baseTherm® for amazing insulation results:�+353 (0) 87 333 0683�+353 (0) 87 223 2456� sales@basetherm.com�basetherm.comClick here to view more finished jobs on our GALLERY:https://lnkd.in/e9zh-nwx#EPD #basetherm #BEPS #pouredinsulation #insulation #koreinsulation #liquidfloorinsulation #floorinsulation #beadscreed Fast Floor Screed Ltd Eddie Hussey Smet Building Products Limited KORE Insulation NBS

This new 160,000 sq. ft, 18 storey office building evolves the successful Nova formula with a sustainability conscious design, a progressive approach to work and wellbeing, and a vibrant, connected community in the heart of Victoria, London.Throughout the commercial space, a range of off-site constructed washrooms & toilet pods were manufactured in Scotland by Modular Interiors. There was a requirement to increase the finished floor height to allow this space to work effectively.The Knauf GifaFloor system is the ideal partner to this project, particularly to help with efficient programming.FHB38 1200x600mm installed on a pedestal understructure was specified as it creates a solid monolithic floor which can be installed quickly and allows for follow on trades within hours of install. Compared to traditional wet screeds, there is no long drying time, no mess or complicated health & safety issues.GifaFloor is the ideal partner to ceramic finishes such as this project. The ceramic tiles can be adhered directly to the panel, without the need for de-coupling layersThe GifaFloor FHB system offers a high acoustic performance, A1 non-combustible fire rating, limits response to moisture or heat and is manufactured from low carbon gypsum fibre.

Fifty5ive Queen Street, Salford is a new 18 storey, 220-unit residential building in the centre of Salford for local developer Salboy.It includes modern, high-quality 1-, 2- & 3-bedroom apartments and duplexes, amenities include private resident workspace, gymnasium, yoga studios, resident cinema room and a terrace garden. Domis Construction is the preferred construction partner for Salboy on this scheme. In early 2022 they approached Encon Insulation in Chorley looking for a more readily available alternative to the stone wool product already specified. URSA UK Ltd was chosen to fill the void and keep the scheme on track. We supplied over 4500m2 of 100mm URSAPAN BLACK - a unique glass mineral wool rainscreen cladding insulation slab; ·      Euroclass A1 fire rating (non-combustible).·      Thermal conductivity of 0.035 W/mK.·      BBA Certified. Kate Fox, Area Sales Manager for the Midlands stated, ‘Following the success of this initial partnership URSA are now the preferred supplier of rainscreen insulation and our products are currently being used on Anchorage Quay in Salford with others in the pipeline including Derwent Street in Salford’.     

PROJECT OVERVIEWWorking with BES, we have successfully completed a refurbishment of an existing space into new quality assurance (QA) laboratory for a pharmaceutical blue-chip client. The fundamental requirement was to deliver a purpose- designed laboratory, located at the heart of the client’s busy manufacturing site, to run robust microbiological analytical activities for the next 25 years.SCOPE OF WORKTo meet the project requirements, we utilised several products, including 100mm Mediline partitions, metal pan ceilings, walk-on ceilings and various types of doors. Our in-house team became involved at an early stage of the design process. Working closely with the main contractor and end-users, we were able to recommend different products which would benefit the client’s processes and flow of the building. One of the key solutions we offered was Norwood’s automatic hermetically sealing sliding door system with large vision panels. This specifically designed doors not only saved space but also provided users with an open feel of the facility. It is due to this project that Norwood became a member of the Automatic Door Suppliers Association – (ADSA). Not many companies hold an ADSA membership and being associated with ADSA promotes the highest standards in automatic doors and gives Norwood operatives the qualification for certifying their own automatic doors to BS 7036: 1988. We delivered a modern and energy efficient facility, compliant with Good Laboratory Practice (GLP) requirements, within a controlled budget. The laboratory was finished to the highest standards, with a great attention to detail throughout.This project demonstrates that by involving Norwood at the early design stages, we can add real value, advising on the most suitable solutions, tailored to the specific needs of our clients.

Architect/Designer: PRPLocation: ManchesterProject Overview: 30 Brown Street is a four-storey brick office building originally built in 1985. The brief was to retain and refurbish the building to provide circa 50,000sqft of adaptable contemporary workspace. ServiceFull hardware scheduling & bespoke finishProject DetailsThis exciting design in the heart of Manchester steers away from using traditional finishes such as stainless steel or brass and instead incorporates a bold use of white RAL9010 PPC ironmongery. Architect David Sharpe explains why‘The building has a lot of exposed raw finishes, including concrete soffits and grey terrazzo flooring, partly inspiring the name, CORE (also referring to the location in the heart of Manchester's office core). Doors and main structural elements were painted a very dark grey to provide a clear contrast with the concrete structure. The inspiration behind the choice of white ironmongery was to provide a high quality counterpoint to the darker raw exposed concrete and painted finishes, and any small part metalwork - eg the lighting, brassware and glazed partition framing, were also specified to be white to match.The contemporary interior was a key ingredient for the brief and although we started with the concept of a mixture of grey and white ironmongery to work with the overall feel of the building during our close work with the architect this was pulled back to a predominantly white scheme with grey pull handles being used for fully glazed doors to create greater contrast and to fulfil the contemporary brief.The choice of specific ironmongery took into account the desire for a minimalist aesthetic, relating to the choices in lighting and brassware.’To find out more about this project visit www.prp-co.uk/project/30-brown-street.html

The Project Derby Manufacturing University Technical College (UTC) has received planning permission by Derby City Council. BAM Construct UK will build the £8 million centre which has been designed by Maber Architects.The UTC will have capacity for up to 600 young people aged 14 to 19. They will study core GCSE's, A levels and engineering qualifications enhanced by project-based learning, work placements, employer site visits and industry expert lectures. The Challenge Produce a system suitable for use in an open space.Open plan arrangement of Cubicles and Solid Surface Vanities located directly off the corridor.Ensure safety of the user and create an anti-bulling, completely visible space.Standard vanity frontages and sinks did not meet the brief, a bespoke wash station was required. The Solution We are proud to have worked alongside Bam Construction supplying and installing our Skyline Range on the Derby Manufacturing UTC Project.The Skyline Range is the perfect fit in open washroom spaces. With full height doors, pilasters and partitions providing complete privacy, elegance, and discretion for the user.Used within increasingly popular open washroom spaces, these full height cubicles are the perfectly solution in open spaces, unisex washrooms and gender-neutral facilities.The Skyline Range is available in three different specification options to meet both budget and durability requirements.SpecificationProduct Range: Skyline SGLDoors:12mm Compact SGL G059 Gris OragePilaster: Polyrey G003 Gris PerlePartition:Polyrey G003 Gris PerleIronmongery: Satin Anodised Aluminium

60-70 St Mary Axe is an office building designed by London-based architectural firm Foggo Associates with retail space on the ground floor. It is located in thearchitecturally ultra-modern financial district of the City of London in close proximity to the iconic 30 St Mary Axe, also known as "The Gherkin," whose facade was realized byLindner. Also, the new building is nicknamed: "The Can of Ham" in its semi-elliptical shape reminiscent of the packaging of English canned ham. The 360° view through the vaulted, all-glass façade offers a great view of the city of London. The BREEAM Excellent building offers 28,000 m² of office space, spread over 21 floors and designedto meet a wide variety of needs.Lindner Interiors contributed to the construction with interior fit-out products. These include the suspended ceilings for the "A" category office rooms on the 3rd, 9th and 12th floors, and the luminous ceilings at the reception and in all elevator anterooms.The Lindner fire grid ceiling system LMD-B 100 with linear grid arrangement was installed on two floors, while on the third floor, light strip modules were chosen instead.These complete the appearance of the iconic building in an impressive way. If required, LMD-B 100 partitions can be attached to the Lindner ceiling system so that the office space can be individually divided. With its radiant fire grids and trapezoidal ceiling tiles, the system is perfect for the sweeping silhouette of the 60-70 St Mary Axe building.Completed Works:F0 Metal ceilingLMD-B - Post cap ceilingsLuminous ceiling/luminous canopyLuminous ceilingsCertification systemBREEAM

Hush Acoustics provided an acoustic control solution for the main exhibit at the SS Great Britain visitor attraction called ‘Brunel’s Mind’, in which visitors enter inside the head of Isambard Kingdom Brunel to see the world through his eyes.Working with Electrosonic, the technology experts ho were tasked with supplying and fitting most of the audio-visual equipment for the project, Hush Acoustics ensured any concerns around the reverberation times in this area could be effectively addressed. The solution came with Hush Wall Covering, a highly versatile product which is formed of unique non-woven high-density polyester to target mid-range frequency sound i.e. speech etc. Its used ensured that the audio presentation within this visitor feature would sound as it should.The Hush Wall Covering product used at the SS Great Britain is just 10mm thick so it utilises little space, which was perfect for the room. The product was developed as a direct result of extensive consultation with influential members of the education sector.Chris Hurst from Electrosonic was very pleased with the results of the wall covering and for our quick turnaround time, saying the product does “exactly what it says on the tin”.

Project DetailProject: Jaguar Land Rover – GaydonLocation: Gaydon, UKProduct: TS.9205 Architectural door closersProject DescriptionThe Test centre for Jaguar Land Rover at Gaydon offers the latest and greatest modern testing facilities for the renowned Jaguar, Land Rover and Austin Martin cars.Building 522 Vehicle testing underwent an extension and refurbishment to house new state of the art computerised equipment and test rigs (nothing more than £6m each!) for testing the brand new vehicles that they are manufacturing for the future. Non less than the new F-Pace Jaguar and the new soft top Range Rover (model not disclose able) were two of the elite products that were surrounded in high efficiency offices and door closers.The TS 9205 architectural door closer was chosen for their new office fit out with in the testing centre and warehouse facility. The TS 9205 door closers were chosen because:High efficiency and ease of operation which matched the ethos of the products that were on the testing platforms.35 year guaranteeAre quick and easy to installMatching the aesthetic finish and design of Jaguar Land Rover corporate image

Challenge: C-Probe's LoCem® +chase® anode mortar has been installed at the Omni Shopping Centre Car Park in Edinburgh, Scotland to 4 levels of underground car parking as part of a comprehensive corrosion management strategy. Overtime the popular car park had succumbed to structural damage and corrosion caused by the ingress of chlorides from de-icing salts from above.Solution: This system comprised of 42 ICCP zones and 7 additional monitoring zones forlevels protected using surface-applied corrosion inhibitors. In addition to this, some 6000 C-Puck galvanic anodes were used to protect newly repaired areas to 2 levels. All the anodes and monitoring could be controlled and data accessed remotely throughoutthe car park with AchillesICP and AchillesIES, helping to extend its service life for 100+ years.Outcome: This ESG compliant approach meant there was no need for demolition or extensive reconstruction using new materials, helping to reduce waste and harmful emissions. Reconstruction was also a near-impossible strategy due to underground facility and electric tram on land, meaning something non-invasive like cathodic protection was essentialto minimise social disruption. 

Client: Royal Borough of Greenwich Council Architect: Frankham Consultancy Group Assembly & Performance:·        All constructions including APL Tritherm™ structural framing system and all as non-combustible assemblies·        Roof – 10,000 m² of APL Energi Twin-Skin: Profile 31/1000RR in stucco-embossed mill-finish aluminium on walk-on roof liner plus all associated flashings, gutters, fixings and sealants, U-value = 0.18 W/m².K·        Walls - 10,000 m² of APL Energi Twin-Skin: Profile AP45HR in RAL 9006 PVF2 aluminium on wall liner plus all associated flashings, fixings & sealants, U-value = 0.16 W/m².K Special Features:·        Client required a 40-year maintenance free material for the roof in the marine location·        Multiple consultants employed by the end client to ensure the construction exceed current building regulation due to the proximity to Grenfell·        APL clamp-end lap detail for the roof to allow for thermal expansion·        APL Firewall™ with 60 minute integrity and 60 minute insulation ™ construction due to boundary walls Building Location:·        London Borough of Greenwich