"mains gas fittings"

Completed in 2020, this residential building spans 9 storeys and a double-level basement, providing 201 luxury apartments.Located in the City of Westminster, the existing 7 storey building was completely stripped down to only the basement level, leaving existing basement walls before it was replaced with the 9 floors costing an overall of £135 million.The site is surrounded by public roads and footpaths on all four sides which created a challenge in terms of logistical access and security for the project. Because of these boundary restraints, Panthera Group designed a narrower concrete block supported hoarding system. The completed building includes private spa, lounge, fitness and amenity centre.To resolve the public access problem, 48 Carey Street has dedicated one of the basements to an underground car park and it can be accessed through the main entrance on Carey Street, or another entrance on Portugal Street.Selo provided wallpaper riser door systems in the main corridors, which were specifically tested for the project. The advantage of the wallpaper is that the riser doors then seamlessly blend in with the surrounding design and the eye is drawn to the front door of the apartment, rather than what would have been an unsightly riser door. Inside the apartments, the interior design is modern with some traditional features such as paneling in which we were glad to support the architect by providing bespoke sliding pocket doors to compliment the design, with their panelled leafs.

A major United States oil refinery has chosen Hempel’s Hempaline solvent free epoxy lining as an interior tank lining for a 200 foot / 61 metre tank diameter sour cured oil storage tank.Hempaline epoxies are 100% solid materials that can often be applied in a single coat and have rapid curing properties. This saves our customers time and money in application costs and completion times. Faster project completion allows them to return a unit to service quickly producing revenue.Hempaline epoxy was chosen for this application because of its ability to resist acid conditions of the tank’s cargo, high sulphur crude oil. Hempaline will provide long lasting protection to the tank, minimising future maintenance and repainting costs.Our Hempaline Defend 630 is a fast cure, highly chemical-resistant internal coating designed specifically for severe service environments, such as those found in the oil and gas industry.

This New Forest family home features an impressive double-height landing space. A small hatch positioned 2.65m above the floor-level provides access to the loft space, which offers useful storage and contains the boiler. The homeowners wanted easy access to the loft. The easy-to-use 'Supreme Vertical' wall access loft ladder from Premier Loft Ladders provided the perfect solution.Despite being manually operated, it is very easy to use due to counter-balance springs and gas-strut mechanism. Furthermore, the Supreme Vertical is offered with a made-to-measure insulated hatch, which avoids having to have a separate (independently operated) door. In addition, the heavy-duty construction makes it ideal for regular use and long-term durability.Visit our website to read the full case study and view the picture gallery. You can also find the 'Supreme Vertical' in NBS Source.

The Main Stadium at Qian Tang river front, opposite the city’s new Central Business District, is an impressive project with a complex structure. Chosen to be the main venue of the 2022 Asian Games, the main stadium covers an area of 210,110m2. In addition tothe 80,000-seat main stadium, the project also includes 10,000-seat tennis center, aquatic center, convention center, athletic facilities and retail. In the first construction phase alone, Jotun’s Performance Coatings were meticulously specified for coating the 18,000 tons of steel in the main stadium.

London Hilton on Park Lane, an iconic hotel renowned for it’s luxury, elegance and history have recently updated and renewed it’s Grand Ballroom with the pre-function area which now features an extensive wood veneered aluminium privacy & shading screen system by Technowood.One of the challenges that the team at GA Design have faced was the privacy & shading solution for the large windows that are running along the whole pre-function area.Their designers wanted to utilise a rotatable shading system which is both extremely luxurious and fits in with the aesthetic, yet functional and practical.The desired finish was authentic, real Walnut that is heavily stained to a beautiful beige tone while the visible wood grains create a unique texture for the light reflections and touch.The required sizing for both appearance and practicality have ruled out natural solid wood right away. Panel width of 440mm – yes; nearly half a meter! – with only 40mm thickness would have made these elements way too unstable and heavy if solid wood was used.Technowood UK was able to provide a complete bespoke privacy and shading system for this project: Walnut natural wood veneered aluminium profiles for a synchronized, mechanical rotating system of our design with brushed bronze finish elements & cover plates.Our approved installers PSBK Limited did an outstanding job! The complete installation took less than 2 days during the Easter bank holiday weekend.Some of the key advantages of the system:The privacy & shading blades are near 3 meters long unusually wide and slim; while remaining rigid, solid and dimensionally stable. The bespoke nature of the whole system allowed for a perfect and seamless integration between the marble columns. Installation time is unparalleled. 4 separate systems measuring over 6 meters by nearly 3 meters each. Over 72 square meters of area utilising 57 blades in total.

ChallengeContractors Guaranteed Asphalt (GA) faced a unique conundrum regarding the insulation of the roof of the O2 Arena, the centre piece on the site of the former Millennium Dome and the first purpose-built music venue in London since The Royal Albert Hall in 1871.As the area required superior acoustic properties, a rock mineral wool product was the obvious solution, however the split-level roof form of the construction meant that loose mineral wool fibres were visible in the surrounding airspace. This is where Knauf Insulation’s technical expertise became invaluable! Knauf Insulation was able to specify a bespoke white-tissue-faced Krimpact product which entrapped the loose fibres.SolutionKnauf Insulation supplied over 100 tonnes of their Rocksilk® Flat Roof Slab Extra at 150mm (2x75mm), a consistent, high density rock slab with superior impact and compression resistance. This material is designed to offer not only the acoustic performance required by such a venue, but also good thermal resistance and an excellent fire rating classification (Euroclass A1 non-combustible, the highest level possible). The white-tissue-faced product was suitable to be exposed to the elements, and later sprayed with a grey solar reflective paint to seal the surface and enable the product to camouflage into its environment.To make the project even more complicated, the cranes used in the production did not fit under the existing structure of the Dome which meant that the roof had to be constructed at ground level and lifted into its final position. This was no problem for Knauf Insulation thanks to its innovative Supakube delivery system, which meant the product could be delivered to the correct area of the project with minimum effort. Supakube uses advanced compression technology and strong packaging materials, which ensures the product is not only easy to store but can be delivered more efficiently saving time and reducing carbon emissions from delivery vehicles as more product can be loaded onto each lorry.

Installer – Dearneside Fabrications LimitedMain Contractor – Taylor WimpeyArchitect – PRP ArchitectsClient -Taylor WimpeySystem- Vantage® CS (Coping / Capping system)Loyal customer and expert installer, Dearnside Fabrications Limited contacted us about utilising our Vantage® CS coping on this exclusive residential scheme next to the Chelmer River, Chelmsford, south east England.BTS Vantage® CS system was chosen because it has been designed with many advantages over standard pick and mix systems.Although every CS installation is engineered individually, the coping system is always very quick and easy to fit on site. It is always clipped on ensuring no fixings pierce the top side or front face of the coping. The only visible fixing is located on the inside wall. The capping is located on a robust extruded alloy bracket with specially designed grooves that include a rubber gasket, ensuring a snug watertight and anti-drum fit.The photos do not do the system justice as there is no butt straps needed leaving nice smooth lines and where corner junctions are needed, they just slip into place!As always BTS take great pleasure in supporting a key customer on such a prestigious installation which is now helping to deliver 421 new homes in a thriving riverside quarter development.Dearnside Fabrications Limited

BackgroundThe Injured Jockey Fund (IJF) Oaksey House rehabilitation centre in Lambourn, Berkshire, was opened in 2009 by the IJF Patron, HRH The Princess Royal. Oaksey House provides specialist rehabilitation treatment for physical and neurological injuries, it has a fully equipped gym which includes a state-of-the-art anti-gravity treadmill. The centre has respite accommodation available for those receiving extended treatment and their carers. Educational courses on fitness and nutrition for the general well-being of young and aspiring jockeys are also on offer.Oaksey House is not only a rehabilitation centre for jockeys, but anyone with physical or neurological injuries. Although the centre was only opened in 2009, it was decided that a refit was required to make improvements to further support the people that pass through its doors. The refit included moving the gym to the first floor and building a hydro pool on the ground floor.The ChallengeRelocating the gym to the first floor was no easy task, primarily because the building structure was composed of a steel tray and concrete base. To accommodate gym activity, the floor build-up would need to be enhanced to prevent noise and vibrations travelling through the building.As a charity, the IJF had limited funds to work with, so flooring specialists, Sport & Fitness Flooring, worked with the architect and an independent consultancy to identify an effective solution within the specified budget. Moreover, the floor had to be designed to meet the needs of four distinct areas: a cardiovascular zone, a running track, main gym area and an entrance lobby.The project was unique because various performance requirements had to be met across the four areas but the floor level needed to be consistent throughout to make it accessible for wheelchair users. Sport & Fitness Flooring consulted CMS Danskin Acoustics – Gym Flooring Division to advise on potential solutions to address this challenge while remaining cost effective.The SolutionCMS Danskin Acoustics worked with Sport & Fitness Flooring to undertake on-site subjective testing to determine the level of sound reduction and vibration control that would be required. The primary objectives were to prevent vibration travelling into the structure of the building thus resulting in potential structural damage or unwanted noise levels on the ground floor below. Samples of different build ups were provided by CMS Danskin Acoustics on site for testing within a day of the initial request.“Throughout the planning stages CMS Danskin Acoustics acted as a ‘springboard’ for our ideas. They were extremely helpful in offering their expertise to find solutions to meeting the performance requirements of the floor,” said Darren Wood, Director of Sport & Fitness Flooring.Sport & Fitness Flooring worked with CMS Danskin Acoustics to identify a way of raising the floor in different areas to meet a consistent 84mm thickness throughout, without having an adverse effect on the acoustic performance of the flooring. CMS Danskin Acoustics developed a bespoke specification for the four key areas, with solutions subsequently presented to the architect and approved for use on the project.The ResultCMS Danskin Acoustics was able to meet the performance, volume, and diversity of product needed to effectively treat the floor at a competitive price and on budget.In the main gym area, a high-performance combination of everroll® Multitile (everroll Multitile 27mm) was bonded to Regupol® 40/80 Acoustic Foam and fitted to Regupol® Vibration 300. In the cardiovascular zone, Multitile (everoll Multitile 27mm) was bonded to Regufoam® 270 acoustic PU foam and fitted to ply which was adhered to Regupol® Vibration 300. The track was treated with BOK Sprint track bonded to a everroll® Impact Pad elastic layer, ply build up and Regupol® Vibration 300. Finally, concrete effect Luxury Vinyl Tiles (LVT) were used to create a purpose-built ramp up to the 84mm floor level from the entrance lobby.On day one of the build schedule, there was a timed delivery of the material. The bespoke order was exactly as specified and allowed installation to begin immediately with no delays. CMS Danskin Acoustics attended Oaksey House to provide expert on-site support and technical guidance on the installation. The project finished a week ahead of schedule, on budget and the flooring met all the performance requirements that were specified. Crucially, a consistent floor level was successfully achieved throughout the gym.“It’s quite common for suppliers to just sell a material and move on, but CMS Danskin Acoustics deliver a first-class expert and professional service from initial technical involvement, to tracking, delivery, installation and sign off. We regularly work with CMS Danskin Acoustics on various bespoke projects and are always confident in the solutions and expertise provided,” concluded Darren.

Hart Door Systems has worked with a number of UK water companies to improve site security and efficiency. In particular the need to secure remote and often unstaffed but vitally important sites. Water sites have particular needs which require reliable and secure doors and the engineering expertise that Hart offer.The challenge This Yorkshire Water had 3 existing un-secure horizontal doors. These manual operation doors had fallen into disrepair and presented a security risk. Automatic doors were required to provide efficiency and security. The solution The Hart solution was to install its roller shutters, fitted in a customised way to suit the environment and to ensure security, ease of installation and minimum disruption. One of the things Hart has significant experience in is fitting doors that add security features but without the need for additional structural works. Disruption was further minimised by working in collaboration with the main construction contractor, scheduling the work to fit in with not only the day to day operations, but other work happening concurrently.Because of Hart’s experience on sites such, existing vital operations were worked around – which continued during the removal of the old doors and installation of the new. The success Several more SR rated doors are planned at the same site, so that the company can replicate the success and the improved security that has been provided.Hart has gained invaluable experience working with various water companies installing high specification SR rated security shutters. These doors meet an established set of standards to prevent unauthorised access and have been tested and shown to minimise the threat of certain intruder attacks.For those sites that need constant access by people and / or traffic, the Speedor brand of doors can provide additional high speed operation. Speedor and SR doors can be used in combination to give complete flexibility and the best of both worlds.

Whitburn Partnership Centre was designed by Project Architects, Matthew Fair, Neil Forrester and Jamie Bateman at Smith Scott Mullan Associates for West Lothian Council. The design of the contemporary £4M building restores the historic Whitburn Burgh Hall original façade as it is one of the towns most renowned buildings and incorporates a new-build two-storey extension.Located in the centre of Whitburn, this building is a community hub that embraces the West Lothian Council’s model of bringing together services that benefit local communities whilst delivering financial efficiencies through the decrease of council buildings. This building facilitates a library, community halls, museum and customer information service office, making it an important community resource. Project:Whitburn Partnership CentreProject type:New buildLocation:West Lothian, Scotland,Waterproofing:Bauder Total Roof System (BTRS)Roof size: 525m2Energy generated from PV array: 10.35kWp Specifier: Smith Scott Mullan AssociatesMain Contractor: Maxi ConstructionApproved contractor: ProCladd (Scotland) LimitedSolar PV installer: Intelligent Electrical SolutionsThe specificationTo support the West Lothian Council's sustainability objectives of achieving high energy efficiency, it was our responsibility to specify a waterproofing system and provide a solution for natural energy generation. The bituminous Bauder Total Roof System (BTRS) was chosen for this project as it features membranes that can withstand impact and tearing, as well as thermal insulation that met the required U-value of 0.15 W/m²K. This waterproofing system is verified by the BBA and offers a service life in excess of 35 years.The BauderSOLAR system was also specified, as it incorporates photovoltaic arrays for natural energy generation. The photovoltaic mounting system is attached to the roof without penetration of waterproofing or the deck, safeguarding the integrity of the waterproofing to fulfil its full-service life.Project challengesThe Architect’s design incorporated unusually high parapet upstands, which posed a challenge for installers. Area technical manager for Bauder, Christopher Langton, attended design meetings with the Architects and Main Contractor to discuss the best solution for installation. A mutual agreement was made for the underlayer to be mechanically fixed to prevent any slippage of the capping sheet membrane. Due to the height of the upstand, non-combustible insulation BauderROCK was incorporated into the design at these details.The installation of BauderSOLAR F uses prefabricated bituminous BauderK5K membrane sleeves to slip over the mounting plates and welded into position, anchoring the plates to the surface of the Bauder waterproofing system. Approved BauderSOLAR installers, Intelligent Electrical Solutions, installed the BauderSOLAR system, collaborating with ProCladd, approved contractor for the waterproofing installation, and other trades during the roof installation.There is a junction where the flat roof meets the original slate roof of the adjacent building, this detail fell under the torch free zone that hot air welding techniques are used to install the membranes within these areas.The resultInstallation of the Bauder waterproofing system may only be carried out by trained and certified operatives approved by Bauder. A project pre-start meeting was held by Bauder site technician, Duncan Hastings, and area technical manager, Christopher Langton inviting the Site Manager from Procladd and their Bauder badged operatives. During this meeting, they discussed the installation of the project, and identified the areas that required torch-free and torch-safe detailing. They also discussed how the project was going to be delivered in co-ordination with other trades working on the site at the same time, for example cladding and lead that was installed atop the waterproofing upstand details.Weekly site-inspections were carried out by Bauder site technician, Duncan Hastings during the project. Visiting the site frequently meant that Duncan could provide consistent support to the installers and answer any questions they may have had directly. It also meant that the quality of the roof installation was being monitored regularly to ensure it would be to a high standard, achieving the comprehensive guarantee.The approach taken to deliver this project on time and to budget was through meticulous planning and working to tight time frames. The organisation of the delivery of Bauder products to site had to be in line with the schedule to ensure that the site was ready to receive a delivery. With the project located in the busy centre of Whitburn next to a cross junction with traffic lights. This meant that timed delivery of products to site was required in addition to prebooked off-loading by pump truck and tail lift or by telehandler.Health, safety and environment was managed during the planning, design and installation of this project by advising that all installers follow the advice shown in the “Responsible Specification Checklist” produced by the National Federation of Roofing Contractors.In accordance with the Workplace (Health, Safety and Welfare) Regulations 1992, roof edge protection in the form of scaffolding was installed during installation. The project’s perimeters were surrounded by Heras fencing to isolate the construction site from the public. All scaffolds that were on the elevation next to the public had toe boarding and safety mesh where required.As standard, there was a one-hour Firewatch after the Bauder membranes have been installed using a gas torch. This was carried out by Procladd operatives each day when they were working on the project to ensure the welfare of the workforce, and the safety of other trades and that of the building. The 19kg gas cylinders were used on this project as they are easily transportable on the roof area. At the end of each working day, the cylinders were stored in a locked and designated gas storage unit on site.System installedBauder Total Roof System (BTRS)1 BauderK5KElastomeric bitumen torch-on capping sheet in charcoal grey. This product features a spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture, and a mineral finish to provide protection against UV degradation.2 BauderTEC KSA DUOA self-adhesive, elastomer bitumen underlayer. This product features distinctive technology for lap sealing.3 BauderPIR FA-TE flatboard insulationA rigid polyurethane foam board faced on both sides with aluminium foil.4 BauderTHERM DS 1 DUOA self-adhesive, elastomer bitumen air & vapour control layer.

The $18.8 billion Hong Kong–Zhuhai–Macau Bridge, the longest open-sea fixed link on earth, is now protected by fire panels from from global industry leader, Advanced.A network of 31 Advanced ExGo gas extinguishant control panels were installed as part of the active fire protection protocol for one of South East Asia’s most ambitious infrastructure projects. The Advanced network protects the artificial island gateway in Hong Kong that serves as an entry and exit point for the new 34-mile bridge-tunnel hybrid system, used by over a 15 million people a year.The ExGo panels were selected to protect critical server rooms in 10 different structures on the purpose-built island, including police and fire stations ,as well as customs and administrative buildings. Each extinguishing system was designed, installed, configured and commissioned by Peak Trade International Limited, with every ExGo panel connected to at least one remote status indicator unit.

Bespoke Access Structure | Case StudyThis two-level access structure with staircases, cladding, edge protection handrailing and anti-slip grating flooring was designed by Dura Composites in conjunction with our client ENGIE Fabricom UK, who provide engineering and construction services to sectors including renewables, oil and gas, power, chemical and energy from waste.With the ability to supply both composite timber cladding for the containers and all the required GRP elements for the project, Orsted chose to work with Dura Composites. Although steel had previously been considered, the rising cost of steel versus GRP and its tendency to corrode in coastal environments made composite materials a far more durable and cost-effective option.The resulting access structure is safe, looks attractive and is non-conductive and non-corrosive. With a long design life and 25 year warranty, the GRP components are part of the latest d² range from Dura Composites which offer safer, stronger, faster and proven properties.

Developed as a great space to live in one of Manchester's best-connected locations, close to the city's shops, restaurants & bars, and next to Manchester Victoria train station, the project comprised two 20 and 25-storey residential towers, which delivered 520 new homes.The architect Sheppard Robson, main contractor VINCI Construction, and installer Deckbuilders, all came together to deliver a great project, that is part of a gateway into the city, featuring fantastic-looking balconies, which we were very happy to secure against the forces of nature: namely wind-uplift.There is no one-size-fits-all when it comes to mitigating the effects of negative pressure on balconies and terraces in high-rise buildings, and in this particular case, we had to fix the paving down to the main structure of the building mechanically, to de-risk against the impact of up to -2.68kPa of suction on the roof.To account for cost and time constraints, the system we used to secure the balconies against wind-uplift was the TerraSmart™ Pedestal system with the addition of a visual wind-uplift mechanical fixing.The tiles were mechanically restrained to the pedestals which, in turn, were mechanically fixed to the concrete deck of the balconies.And the outcome? Balconies secured, the project de-risked against wind-uplift, and the beautiful Quadro Argento Tiles (600x1200x20mm) safely in place for all residents to experience and enjoy. Listen to what our specification manager had to say.If you are specifying a project and want to know how you can mitigate the effects wind-uplift or the impact that occurs as a result of urban canyons, we can help.

Orbis OS211 Glass Infill Top FixOrbis OS200 Vertical Bar Infill Side FixThe main NHS hospital for Blackpool and the Fylde Coast, Blackpool Victoria Hospital has undergone a £16.4 million upgrade to create a new main entrance and a multi-storey car park.The new entrance includes a pharmacy, retail units, café, main reception, waiting area and office accommodation. Featuring extensive curtain walling, the new main entrance has been designed to maximise natural light and provide a feeling of openness. The use of glass for the balustrades helped to enhance this design style throughout the main feature areas and voids, using Delta Balustrades’ Orbis system.Delta Balustrades also supplied the balustrades and handrails for the main and rear staircases in the new multi-storey car park. Delta Balustrades calculated the loadings for all areas of the hospital installation and specified multiple fixing details for the atrium to accommodate variations in floor levels and construction.

The University of Bristol has recently taken delivery of six FalcoCargoBox lockers, creating the UK’s first ever network of secure cargo bike parking. Located across five separate sites at the University, each locker provides unparalleled secure storage for a wide range of cycles including cargo bikes, e-cargo bikes, adaptive bikes, recumbent bikes, tandems, tricycles, oversized and upright cycles as well as bike trailers.The six supplied lockers mark the UK’s first ever network of secure cargo bike parking and the fourth public cargo bike facility installed by Falco, with other schemes including a Beryl public cargo bike hire scheme for the London Borough of Hackney, a secure cargo bike solution for NHS Grampian and a public cargo bike hire scheme for Climate Action Ilkley.Designed, manufactured, supplied and installed by Falco this spring, the images attached show the new FalcoCargoBox cargo bike lockers installed at the following key University of Bristol locations:Location QuantityOne - Coombe Dingle Sports Complex, BristolOne - Downs Workshop, Hollybush Lane, Stoke BishopOne - St Michael's Park, BristolOne - 1-9 Old Park Hill, BristolTwo - Langford Campus, Langford, North SomersetEach secure cargo bike locker makes use of a high security lock, reflective rubber edge protectors and a stylish ‘Traffic Green’ branding wrap. The large double doors at the front of the locker coupled with a gas-assisted lid, provide wide accessibility for a variety of cargo bike shapes and sizes.Introduced in 2021, the FalcoCargoBox was designed to provide secure cycle parking for the increasing trend for cargo and adaptive bikes and is the only product of its type currently available in the UK.The FalcoCargobox is simple and easy to use. Two securely locked front doors open to provide easy accessibility from the front and an innovative gas-strut assisted lid can be opened to provide easy accessibility from above. Together when fully opened, the FalcoCargobox is an open and spacious cargo bike storage solution that is easily operated.For more information about the FalcoCargoBox or how Falco can assist your cargo bike parking scheme, please contact our helpful sales team on 01538 380080.

Britannia Metalwork worked with building contractors Gilbert-Ash and Architects Hawkins/Brown in designing, fabricating, and fitting bespoke decorative floor grilles to replace the damaged originals in the Orangery at the City of London Freeman’s School.It was a project that we were thrilled to be commissioned for and work that we are extremely proud of - the grilles were manufactured, delivered and fitted within the project timeframe, despite pressures of the ongoing global pandemic of 2021.The 168-year-old City of London Freemen's School is set in 57 acres of Ashtead Park in the heart of Surrey. The masterplan scheme included the renovation works to the Grade II listed Main House (including an energy centre), and some new buildings including junior school, dining hall and assembly hall as well as landscaping and car park works. The total cost of the project was £15 and won a place as a Finalist in the 2022 Conservation & Regeneration Constructing Excellence SECBE Awards.Britannia was commissioned to design and make a total of 33 bespoke cast iron grilles, with bare metal finish, to be placed within the marbled floor of the historic and beautiful Orangery. The focus of the work was to complement the heritage of the iconic building while ensuring good ventilation to allow the building to become a flexible and useful large space for school events.Frequently referred to as Cathedral, Ecclesiastical or Victorian decorative floor grilles and as seen here, often placed over channels holding heating pipes, they provide a practical and decorative heating vent. Originally designed for churches they are increasingly popular in private houses, greenhouses, and commercial building developments. Our grilles can be ordered in cast iron or cast aluminium and finished in a wide variety of options. We also work in association with Gunning Heating, making decorative cast iron grilles that fit seamlessly into their underfloor trench heater units.  See our website for a full list of our grille designs or contact us to discuss your bespoke requirements.

Our high-performance coatings systems, designed to stand up to the rigors of offshore environments, were chosen to protect the new platform. The two key areas for us were passive fire protection (PFP) and the ability to provide systems that were approved to the NORSOK M-501 standard. The aim of the standard is to obtain a coating system which ensures optimal protection of the installation, with minimum need for maintenance over a fifteen year period. Chartek is the world’s most complete range of epoxy intumescent PFP coatings and the first choice for the oil and gas industry worldwide. With an in-service track record of over 45 years, Chartek provides safety, durability and efficiency through proven, economical and easy-to-apply solutions, successfully meeting project and customer requirements in the most severe environments. Its combination of both corrosion and fire protection is unbeatable and vital for the Valhall BP oilfield. Chartek was the first jet-fire rated epoxy PFP coating that passed the corrosion performance requirements without a topcoat as set out in the NORSOK standard, demonstrating global technical leadership.  

The University of the West of Scotland’s launched ambitious plans to relocate to a new £110m campus in Lanarkshire, 2 miles away from the current Victorian building.Modern new build environment.The relocation of the campus was tasked to achieve a modern new build environment, “to develop a truly inspirational and world-class University campus fit for existing and future students.” – Prof Craig Mahoney, Principal.Soundis Absorb-R WoodTec Wall Slats was specified for its acoustical performance of Class A NRC and robust material.The WoodTec Wall Slats are based on a fibre gypsum board which has excellent properties regarding both fire safety and acoustics. The slats are less sensitive to changes in temperature and humidity which results in 100% straight aligned slats over their full lifetime.A work of art...Soundis installed the WoodTec Wall Slats to the main wall within the foyer. In addition to the purely functional benefits and its sound quality, this particular area of installation was described by the client as ‘a work of art in its own right’.

A MG500 flush glazed sliding folding system completed project in Coventry. Panel profiles finished in a bronzed aluminum to match the project design. Each panel applied with crittall bars and a reeded glass film, these panels make a statement. MondernGlide were involvement in the project via Planet and it’s been a pleasure working in helping with the design and construction works onsite. The redevelopment project was split into 2 different phases. Phase 1 was all about the sympathetic refurbishment of the main B1 auditorium and associated public spaces. It is about retaining and enhancing the historic nature of this space, whilst refurbishing many of the tired and worn finishes and fittings to completely refresh the space The benefit of the MG500 is that we require no structural support within the ceiling meaning this product can be installed anywhere. With the slim back painted border you have clear view visual lines allowing a superior light flow around the office, cost-effective installation, flexibility in the work environment as well as the simple fact that they look elegant and classy.

CAT stair nosings have been installed into one of the Worlds first purpose-built meeting facilities based in Westminster, London.​AN69 was the main section to fit the rounded step edge, then aluminium extension piece ANEXT creating a wider tread connected to an ANRE25 ramp edge at the back covering the safety vinyl flooring. Finally, the robust Aluminium ATI49.5 aluminium inserts were inserted into the tread of the AN69 to conceal the screw head fixings and give an all-aluminium finish.​Opening in 1912, the Great Hall has an impressively long history for hosting various events, the first meeting of the United Nations in 1946, debates, concerts and shelter for Londoners during the second world war.​Situated in the venues undercroft, Wesley’s Cafe is a hot spot for visitors and especially popular with tourists, the cafe covers over 300m2 and also is adjacent to further event space. Due to the entrance into the cafe is via a staircase, the constant high footfall called for a stair nosing made up from a combination of our Aluminium products.

Gradus products were supplied throughout the Darwin Building. GXT51 stair edgings with interior inserts in Snowdrift (white) were installed on the main staircase. Boulevard 6000 barrier matting was also installed at the main entrance of the building.

Originally an anonymous, almost forbidding, seven-storey office block constructed in the 1980s, York House on Pentonville Road in Islington is being transformed into a contemporary, light-filled co-working space fit for 21st century use.The original building frontage was set back from the road, but the addition of a new five-story front extension introduces an attractive double-height entrance with offices above. Using similar engineering bricks to the main, original building, the new construction allows light to flood in through the use of structurally self-supporting perforated brick lattice, angled at 45 degrees to gain stiffness. A cross-laminated timber structure sits behind while openable windows allow fresh air to circulate.At roof level, a new, cross-laminated timber structure, clad in a perforated zig-zag aluminium screen, echoes the front extension while softening the building edge.The brick selected for the project was a Blue Brindle Smooth – a high quality smooth brick that closely matched the masonry of the original building. The complexity of the lattice work structure required special shapes of brick and perforation to allow visibility through the bricks at the right points. Working closely with the architect, it took the team nine months of developing and testing to get the strength of the product right. Three lengths of brick were produced and used in the construction of the extension: 215s were used in the building of the chevron parapet, 345s were used on the parapet and alongside the entrance, and 440s were used to create the latticework on the main entrance.We are proud to announce that York House was highly commended at the 2019 Brick Awards in the Innovation category and is a great example of a collaborative approach with our customers.

Located between St. David's and Aberdour, the tanker terminal at Braefoot Bay is a base for the export of liquefied petroleum gas. The terminal consists of two jetties located on the north shore of Incholm Island. The gas is piped to the Mossmoran Plant in Fife direct from the North Sea, broken down to form ethane and then converted into ethylene, the basic hydrocarbon 'building block' of the petrochemical industry. The products are then piped the final three mile journey to the Braefoot Marine Terminal where they are fed into tankers and gas carriers for markets in Europe and the USA. The terminal is operated jointly by Shell Expro and Exxon.The jetty was suffering from increasing levels of deterioration of the reinforced concrete structure due to the relentless corrosive action of the marine salt environment on the reinforcing steel. A remedial plan was developed to carry out repairs and to introduce a cathodic protection (CP) system to greatly enhance the protection level and therefore extend the life of the structure. The plan was prepared by structural engineers from Shell, led by Hans Verheyde, and Balfour Beatty Construction Services UK (BBCS) was awarded the contract.Two major factors had to be accommodated within the repair programme. Firstly, the tidal flow that submerged the lower part of the jetty twice every 24 hours and secondly, the jetty is a fully live and very active transport hub and shipping schedules had to take precedence at all times. Round-the-clock flexible working maintained delivery of the twelve-month project.Saint-Gobain Weber's specialised repair concrete products were specified for the remedial actions on the Braefoot Bay jetty and technical application advice was provided for the active phase of the project. A suspended scaffold was designed and installed which allowed fast access when the tide ebbed so that productivity could be maintained. Traditional techniques were used to breakout the spalled and cracked concrete and to wash out the surface chlorides and clean the existing reinforcement steels.webercem five star repair concrete CP is a shrinkage-compensated, high strength, low resistivity, flowing repair concrete designed for use in conjunction with CP systems. This pre-blended cementitious concrete fully complies with the Highways Agency Specification Class 29F for high-strength flowing concrete for major structural repairs. It contains non-reactive aggregates with a low soluble-alkali cement content which is particularly important where CP is to be used. The rapid strength development and dimensional stability of webercem five star repair concrete CP – which reaches 27N/mm² in 24 hours – was especially valuable in the tidal conditions in Fife. Tight shuttering was used on the wide beam sections of the jetty to take the poured concrete which reached an integral bond with the original concrete. This process reformed the structural integrity using products with proven durability.An innovative CP system using Duogard® hybrid anodes from CPT was installed to protect the steel reinforcement with the anodes fixed into the soffits with a special CPT mortar. Where the CP installation required chases to carry the cabling, webercem HB40 high-build structural repair mortar was used to fill and seal the chases. webercem bondcoat, a polymer-modified, cementitious bonding aid and steel reinforcement primer, was first applied into the chases to ensure enhanced bonding. webercem HB40 is an acrylic-polymer modified, single component mortar and is lightweight with high build qualities. It can be applied in layers up to 75mm thick vertically, and 50mm on overhead soffits, and can be used without formwork. It was then applied onto the tacky webercem bondcoat primer and finished flush to the concrete surface.The Braefoot Bay terminal project has been completed successfully and Dewi Miller, contracts manager, BBCS, is confident that the jetty protection will extend the working life of the structure. "The products we have used are excellent and the application methods have enabled us to deliver a high degree of protection and reinstatement to the concrete structure. Working on a live site in a tidal zone has required a flexible work schedule but the whole project has worked exactly to plan and the client is very pleased with the result. The Weber materials have been the key to achieving this success."

Reigate & Banstead Borough Council is transforming Marketfield Way, Redhill, with a brand-new leisure, retail and residential development. The 0.59-hectare site will turn the western side of Marketfield Way into a vibrant destination for both property seekers and visitors to the local area. It is made up of the Council’s former Marketfield Way surface car park and a group of retail and commercial buildings fronting 18-44 High Street.Features of the scheme include:A new multi-screen cinema hosting 7 screens11 new units for restaurants and shops on the ground and first floors150 new one- and two-bedroom homes to be privately rented within buildings up to thirteen storeys in heightLandscaping and public space improvements including a ‘galleria’ pedestrian route through the site flanked by shops and restaurants.The waterproofing and gas proofing of the new mixed use scheme basement area and ground floor was a crucial element of phase 2 of the project. Reigate and Banstead Council therefore called upon contractor Vinci Construction to undertake the waterproofing works, utilising Sika’s solution provided through subcontractor Oliver Connell & Son Ltd

Langton Homes is a well-established family-owned company specialising in developing properties throughout the Midlands for more than thirty years.One of their recent projects was four high-end luxury detached six-bedroom houses featuring extensive outbuildings, each set within large private grounds. The main property on the development – Langton House, was being specifically built for the owner of Langton Homes.Having used Mustang® Seamless gutters on projects in the past, they had no issues specifying it again for this development. Existing garages on the development, which had previously been fitted with uPVC as a cheaper option, were now failing and leaking, so they were replaced at the same time as the rest of the development was installed with Mustang® Seamless Aluminium Gutters.Mustang® was ideal for this build due to the sleek, clean lines of the gutter, with no external brackets on view. Mustang seamless gutters are strong and durable but lightweight and easy to install, with most of the preparation work being done at ground level before the gutter is raised to height for the final fixing into place, meaning that it is often safer and quicker than fitting traditional guttering.As the aluminium is roll-formed on-site to the exact dimensions of the building in continuous lengths of up to 30 metres, there is no waste.Once installed Mustang® Seamless Aluminium Guttering requires minimal maintenance. It is the only quality-assured seamless gutter system certified by the British Board of Agrément (BBA) to last over 30 years. A certification ARP has held for over 25 years.Colonnade aluminium downpipes completed the installation and were polyester powder coated (PPC) in Anthracite Grey (RAL 7016) to match the colour of the gutter in our in-house purpose-built PPC facility.Aluminium is a natural, non-corrosive material and needs little maintenance, but it is also fully recyclable. Aluminium will not crack, creek or fade, resulting in a truly ‘fit and forget’ system.Andy Craven, Site Manager of Langton Homes, said:“We have continuously used Mustang® Seamless Guttering as a superior alternative to PVC, we have absolute confidence in the installation and the low maintenance of the product.”

Built in the 1990’s, Carden Park is Cheshire’s privately-owned country hotel. A £10m luxury spar and gym facilities opened in 2019. Farr & Harris Ltd, trusted retailer for bathroom suites, were involved in the project.The hotel required modern, quality bathroom products for their hotel, spa and gym to reflect the contemporary décor but water saving was also imperative.Farr & Harris approached us after successfully installing mains operated taps at the hotel previously. This time around, they were interested in our touch-free taps. Our specifications team met with the client to discuss our full range and their features and benefits. We presented our Electroflo infra-red linear range for consideration. The client liked the hygienic aspect and the sleek minimalist style. Samples were provided to ensure the product would be fit for purpose before installation commenced.Testimonial“The touch-free operation is excellent and as with all Dudley products, they are high-quality and robust. Water saving was an important factor with this project so this range was perfectly suited.”Karl Lummis, Maintenance Manager

Valentines house, an 11,000m2 building in Ilford. Originally a commercial office block, it’s position adjacent to both Crossrail and TFL red routes meant it was a prime candidate for conversion to desirable one and two bedroom apartments.The refurbishment works consisted of extending 4 stories including structural strengthening and new envelope to incorporate full fit-out of 122 residential units and 3 retail areas.As part of the conversion, main contractor John Paul Construction, required the expert installation of around 10,000 m2 of acoustic flooring to achieve Approved Document E Building regulations. As part of the acoustic flooring package, Soundis value engineering option of Soundis 10mm Acoustic Cradles, Base Pads, Riser Stackers and 18mm P5 T&G chipboard was selected. Our Cradle and Risers are manufactured from 100% recycled materials assisting to the sustainability targets of projects. An acoustic cradle and batten system was chosen, to level out floor imperfections and to minimise impact noise from passing footfall. Airborne wasn’t so much of a concern in this build due to the high mass concrete subfloor.

Designed by Shawn Hausman Design this hotel features a retro interior style which some may call kitschy or ‘hippie’ style. But there’s no doubt that this hotel is unlike any other, bursting at the seams with bright, vibrant colours and minimalist furniture and décor reflecting a somewhat 70’s glam style. While the interior might not be everyone’s cup of tea, the exterior is quite a sight to behold. With its brutalist-style architecture, it draws on the curved windows that cover the building as the main focus of the design. Originally built in 1974 as an office block and public library Orms were responsible for retaining this stark exterior. The hotel was heightened by a glass extension across the top of the building that holds a restaurant and club.Perhaps the coolest feature of the hotel, the red pill lift. A single external red pod, contrasting vividly with the plain white concrete frame, that transports its guests to all the 266 rooms and the rooftop bars.Selo provided simple, sleek riser doors that fit in perfectly with this modern look, and allow the eye to be drawn to the more important design features of the interior.

Easy to handle, even for this incredibly large project.The Costco store in Wembley occupies a site close to the national football stadium. For the building’s flat roof, architects, Broadway Malyan, in conjunction with main contractors, JF Finnegan, required insulation comprising superb thermal performance and easy-handling ability - Recticel’s Eurothane Eurodeck more than fitted the bill.Ian Catterall from BC Contractors explained:"Eurothane® Eurodeck is a superb quality board. It’s really easy to install and presented no issues for what was an incredibly large project - the largest single-value project we have undertaken. It was an immense job, which required the highest-quality PIR. Eurothane® Eurodeck was just perfect.”About Eurothane® Eurodeck:Eurothane® Eurodeck is compatible with mechanically fixed single-ply systems, benefiting from high compressive strength and excellent dimensional stability that ensures the flat surface finish required for optimum performance in new build and refurbishment projects. It is faced on both sides with a multi-layer coated aluminum foil.

Ridgeway Views is a collection of 490 flats set within 47 acres overlooking fields of Totteridge Valley. These energy-efficient homes offer village life coupled with city living. The development includes a gym, bar, parking, charging points, landscaped gardens, fitness trail, concierge, café, car club and play area. The National Institute for Medical Research was originally designed in 1934 by Maxwell Ayrton, with the buildings all being named after pioneering researchers from the institute (Dodson & Wolff House), with the main cruciform named as Ayrton House. This building has been recreated with a green copper-roofed centre, village pond, 3 storey workspace and restaurant.Cellecta’s HEXATHERM XPERi was specified by Julian de Metz of dMFK working with Hawkins\Brown & RMA Architects due to its closed cell structure that provides unrivalled resistance to water absorption and high compressive strength, making them ideal for external basement lining applications.Barratt Homes was supplied 112,500m² of Cellecta products to develop these flats in the Mill Hill conservation area.

The Glass Yard is a prestigious mixed office and retail development in Chesterfield, on the site of what was the once the largest manufacturer of domestic glassware in the UK. It has been designed sustainably and ergonomically by developer Blue Deer Ltd. for an open plan, daylight filled environment. The client approached Tarmac’s representatives looking for a safe, practical, durable and visually distinctive finish for the main external walkways and first-floor balconies that would complement the modern design and sustainable ethos of the building. After providing advice and number of samples, the client chose TOPTINT Glow a unique, glow in the dark decorative concrete that uses light sensitive chippings to help illuminate areas such as footpaths, cycleways and pedestrian areas. The glowing aggregate provided a passive and energy efficient form of demarcation to help guide clients along the balconies and walkways at night-time and in low ambient light conditions. This fitted with the building’s sustainable design ethos. The gentle glow provided by the light emitting chippings also provided an ambience that was sure to be a talking point for customers and would help put the new development on the map.

When The Kingsmead Academy in Taunton decided toconstruct a new main teaching block, the existing buildinghad been standing for more than half a century – since theschool first opened in 1953.The building was in a state of disrepair and needed replacingwith a contemporary block better-suited to the demandsof modern teaching. The school appointed main contractorBouygues UK to build the £10 million three-storey teachingblock with a one-storey main hall, and Bouygues turned toCW Jones Carpet & Flooring to install the floor coverings.

The main kitchen at the Old Deanery, official residence to the Bishop of London, was part of a major refurbishment of this historic home, lying in the shadow of St Paul’s Cathedral.Situated on the first floor, the main kitchen is a very compact room and this presented special challenges to its design. The available space was truly maximised under the design of Caroe Architects and it was then the task of GEC Anderson to measure, supply and install the specialist fabrications as well as the many appliances.Sykes & Son Ltd were awarded the main contact for the the total refurbishment project.

In July 2022, Medspace was awarded the FF&E package for the New University of Bristol Dental School.Working closely with the University and construction company Kier, Medspace were tasked to design, manufacture and install bespoke Reception Desks, 119 Dental Bays, Worktops, Roller Racking and HTM71 Storage as well as fit Group 2 items such as hooks, mirrors, grab rails and soap dispensers.Once again, cleanliness, clever design and functionality were paramount in the successful execution of the project. The existing building spanned six floors and hosted a series of challenging shaped rooms and obstacles to overcome. Working alongside the Kier design and site teams, Medspace worked to fit all bespoke items within the existing fabric of the building, producing more than 160 designs to meet the exact needs of the university staff and students. The communication between the design and the installation team played a huge part in ensuring that the highest level of finish was achieved with weekly meetings held to iron out issues before they got to site. This high standard is immediately apparent as you enter the building and view the 'centre piece' main reception desk, which features a solid surface desk with whitewashed birch panelling, surrounded by a fully bespoke structure featuring fully integrated services, matching the same birch finish to compliment the integral desk.The £27million purpose-built facility near Bristol Temple Meads train station was successfully opened in 2023 following extensive renovations. Medspace is proud to have been part of creating this exciting upgrade for students and staff, incorporating bespoke design and the latest equipment spread across 7,300 square meters of space.

Project: Creative Centre, York St John UniversityClient: Tate+Co ArchitectsScope of project: Design and supply 24 bespoke-sized rooflights for the roof of a triple-height atrium to fit within apertures in a glulam timber grid.Products: 24 bespoke sized em.glaze rooflights, some with concealed actuator smoke ventsThe ChallengeThe roof of the striking 14m, triple-height atrium, which forms the centrepiece of the newly opened Creative Centre at York St John University, features a glulam timber roof grid. Architects Tate+Co wanted to punctuate that grid with bespoke sized rooflights to bring even more light into a space which is used as an exhibition, teaching and theatre space, as well as somewhere for students to mix and relax. The rooflights had to have a sleek, minimalist aesthetic, in line with the overall design intent of the atrium and, because almost all the services in the atrium are hidden, needed to be available with matching concealed actuator smoke vents.The SolutionWhitesales designed and supplied 24 bespoke-sized em.glaze rooflights which suited the specification perfectly. The flush-glazed glass-to-edge design of the em.glaze units with flat sealed glass units fitted within a fully welded, thermally broken aluminium frame achieved the lean, crisp look the architects were looking for. The fact that they were also available with fully concealed actuators in the smoke vents supplied by our affiliate business Sertus was an added bonus. All the rooflights were supplied for the project complete with preformed 300mm PVC splayed upstands, which enabled them to be fitted directly into the glulam grid, saving the contractors time on site. They were also fitted with specially coated glazing which allowed for a degree of solar gain and contributing to the low energy requirements of the BREEAM Excellent rated building.‍The BenefitsAs well as the meeting the design specification, Whitesales’ technical team helped to ensure that the em.glaze rooflights could be installed quickly and efficiently by the main contractors Kier Construction. We estimate that our recommendation to supply the units with preformed 300mm PVC splayed upstands saved the roofing team at least two weeks on site because they didn’t have to construct the upstands themselves and the integrated splay made waterproofing the roof a lot easier. Tate+Co Director Andy Baker-Falkner is delighted with the em.glaze units: “We liked the lean, crisp design of the Whitesales em.glaze units, particularly with the clean white reveal and option for fully concealed vent actuators.”

The ChallengeThis prestigious three storey new build property in the village of Bilton was designed following close liaison with the local planning authority, in order to be sympathetic to other nearby homes.The SolutionCareful selection of the brick type was critical to this process, as the property needed a soft aesthetic to its front elevation, addressing the local authority’s concerns about the impact of the finished project while still meeting the client’s personal requirements.With this in mind the client selected Forterra’s Autumn Glow facing brick. This not only met all the criteria set by the local planning authority, but its enhanced durability designation allowed the brick to be used to create a seamless brick façade.Tom Holland, Managing Director of Holland Build, said, “We put forward several brick types to the planning authority as part of this two storey project, and a unanimous decision was reached that the Autumn Glow best fitted the design of the property, and was most in keeping with the local area.“I was already familiar with the Autumn Glow, having used it extensively on the construction of a luxury apartment building on a previous job, and never had any issue with them. They’re a good, solid facing brick, and extremely durable, and I’d recommend using them as a reliable stock brick.”The BenefitsGareth Rouse, Architectural Technologist for Forterra, said, “The Autumn Glow is a stock facing brick more tailored to the self-build market, due to its relatively soft aesthetic and higher-grade durability. It also contains recycled content and is the most sustainable stock brick available on the UK market.“It suited this project particularly well, complementing the timber frames used in the windows and doors and also proving ideal for the construction of the arch above the main entrance.”Although the main brickwork was intentionally kept simple, the client required a grand entrance that would draw visitors to the front door. Owing to the easily moulded nature of this particular clay type, special shaped bullnose bricks were utilised on the jambs of the main entrance, which then continued as tapered voussouirs into the semi-circular arch above. Simple, but effective herringbone panels were also introduced to draw the eye, breaking the appearance of mass stretcher bond brickwork.Forterra nominated the finished project for the 2018 Brick Awards, in the Individual Housing Development category.