NBS Source
List your products

liquasil

66 results found

Sort by:

Showing 1-36 of 45

Liquid gutter lining system by Liquasil

Liquasil Ltd

The metal gutter to this gymnasium in Eastbourne was corroded and leaking. Liquasil's Gutterseal system was specified because it could easily cope with some unusual protrusions present in the gutter. Heaqvy rust was removed and the surfaces treated with SWT Primer - a marine quality corrosion treatment. Joints were sealed using Non-Sag Sealer, which has 1400% elasticity and then the entire gutter was coated with Liquasil One to provide a flexible, seamless and permanent gutter lining.

Seamless Liquid Gutter Lining System by Liquasil Ltd

Liquasil Ltd

Liquasil's liquid gutter lining system is designed by Chartered Building Surveyors to produce a seamless & flexible finish to the most complex of commercial and industrial building gutters. This liquid gutter lining system goes where physical liners just can't go - around corners, up walls and into the most complex details, completely seamlessly. The unique Liquasil 10 year latent defects insurance guarantee is provided as standard on most projects.

Liquid Gutter Lining Project using Liquasil's Gutterseal system

Liquasil Ltd

The metal gutters to this industrial unit were severely corroded and leaked in various places. The Liquasil liquid gutter lining system was specified to provide a seamless, flexible liner. Heavy and loose rust was first removed and the surface was treated with Liquasil SWT Primer, a marine quality rust treatment. Joints were sealed with non-Sag Sealer and then Liquasil One was applied to the entire surface. The project is covered by Liquasil's unique Latent Defects Insurance Guarantee.

Asbestos Roof Coating & Metal Gutter Lining by Liquasil Ltd

Liquasil Ltd

This was a relatively small installation of under 100 sq metres of asbestos roof coating and metal gutter lining. The asbestos cement roof was first cleaned using a closed box pressure washer, with all waste water being filtered to 2 microns. The cleaned roof was coated using Liquasil's BBA Approved asbestos roof coating system, Asbestoseal. The metal gutter was cleaned and thn treated with SWT (Surface and wet tolerant) corrosion primer. Joints were treated with Non-Sag Sealer and the gutter lined with Liquasil One to provide a seamless lining.

Concrete Gutter Repair with Liquasil's liquid gutter lining system

Liquasil Ltd

This concrete gutter had been problematic for many years, with water ingress causing much damage to the flats beneath. The bricks to the parapet wall were blown and parts had to be rebuilt as part of the project. The liquid gutter liner was applied to the base and all upstands to the gutter, including the brickwork, to perform a 100% leak-free, seamless gutter. Products employed: Liquasil One and Non-Sag Sealer.

Metal roof coating with BBA Approved Metalseal from Liquasil

Liquasil Ltd

The existing factory finish to this metal roof was degraded and failing in multiple places. The roof was cleaned and all existing GRP roof lights were replaced. Cut edge corrosion & spot rust was treated using Liquasil corrosion primer. An initial coat of Metalseal 20 was roller applied to all corrosion treated areas, followed by a single coat of Metalseal 20, spray applied to the entire roof area. The end result looks like a new roof and will easily provide 20 years protective, water resistant finish to this once poor roof.

Metal roof renovation project using Liquasil's BBA Approved Metalseal coating system

Liquasil Ltd

The former ToysRUs premises in Luton required complete refurbishment and part of the project involved renovation of the metal roof. Liquasil's BBA Approved Metalseal 20 system was specified because it includes the advanced, SWT Primer to treat cut edge and spot corrosion in-situ. The metal gutters were lined with Liquasil's Gutterseal, seamless liquid gutter lining system. Upon completion of the metal roof coating project, the unique, Liquasil Latent Defects Insurance Guarantee was issued. The Liquasil guarantee includes cover for Professional Design, meaning that you can specify Liquasil products with 100% confidence.

Metal Roof Refurbishment Project Using BBA Approved Metalseal by Liquasil ltd

Liquasil Ltd

This is a metal roof coating & refurbishment project using Liquasil's BBA Approved Metalseal 20. The project involved removing an existing cut edge corrosion treatment and re-treating with Liquasil SWT Corrosion Primer, followed by two coats of Metalseal. The whole roof was then coated with Metalseal 20 to provide long term protection against fungal growth and weathering. The unique 10 year, single-point latent defects insurance guarantee was issued at the end of the project. For details, speak to our building surveyors on 0121 709 5352

Cut Edge Corrosion Treatment using BBA Approved Flexlap from Liquasil Ltd

Liquasil Ltd

Liquqsil's BBA Approved cut edge corrosion treatment was specified for use on this metal roof on an industrial unit in central Birmingham. Liquasil SWT Primer was first applied to all rusted areas. SWT stands for "Surface and Wet Tolerant" meaning that it can be applied to wet and rusted surfaces. The primed areas were then coated with Liquasil's Flexlap - a purpose made silicone polymer coating to provide total protection from further lap corrosion.

Asbestos roof cleaning & Coating project using BBA Approved Asbestoseal from Liquasil Ltd

Liquasil Ltd

This is an example of an asbestos roof cleaning and coating project using a closed box pressure washer and the BBA Approved Asbestoseal asbestos roof coating system from Liquasil. Specify Asbestoseal with confidence, as it's the only BBA approved system on the market for this purpose. It also comes with the unique Liquasil Latent Defcts Insurance Guarantee, including cover for Professional Design. Need more information? See our NBS specification or call 0121 709 5352. Liquasil is owned and run by Chartered Building Surveyors. We will help you with your specs!

Asbestos roof cleaning & coating using Liquasil's BBA Approved roof coating, Asbestoseal

Liquasil Ltd

This asbestos cement roof was heavily contaminated with moss and lichen, following many years of neglect. Liquasil's asbestos roof coating, Asbestoseal was specified because it is the only such coating with BBA Approval for asbestos roofs. Also, the completed project came with a 10 year Latent Defects Insurance Guarantee. The roof now repels water instead of absorbing it and nothing can grow on top of the coating system, meaning it will stay moss-free forever. Call 0121 709 5352

Metal roof & parapet coating project using Metalseal 20 from Liquasil

Liquasil Ltd

This project involved the removal of the existing factory finish to an industrial unit in the West Midlands, followed by cut edge corrosion treatment and full roof & parapet coating. Once the original finish had been removed using high pressure jet washing, all of the end laps to the roof sheets were coated with SWT (Surface & Wet Tolerant) corrosion primer, to prevent further rusting. Once cured, the roof was coated with the BBA Approved Metalseal 20 to a film thickness of approx 300 microns.

Liquid Gutter Liner on asbestos cement roof

Liquasil Ltd

Valley gutters with limited access on fragile asbestos cement roofs are always difficult to maintain and repair. A liquid gutter liner is often the only solution in cases like this and none are easier than Liquasil’s Gutterseal system. The metal gutter was first cleaned and dried, then treated with a coat of Liquasil’s corrosion treatment before being over-coated with Liquasil one liquid gutter liner. All joints were treated with Liquasil Non Sag Sealer, providing a fleece-free, very strong joint and seamless gutter lining.

Metal roof coating and liquid gutter liner

Liquasil Ltd

The metal roof was first prepared using high powered jet washing equipment, to remove loose and flaking materials. Liquasil corrosion primer was applied to the corroded cut edges and the entire roof was sprayed with a single coat of Metalseal 20. The metal box gutter was heavily corroded. The loose and flaking material was removed and Liquasil’s Corrosion Primer was applied all along the gutter. The joints in the gutter were sealed with Liquasil’s unique Non-Sag Sealer and then the entire gutter was coated with Liquasil One to provide a seamless gutter finish.

Metal Roof Coating Project in Middlesex

Liquasil Ltd

After first cleaning the roof and attending to rusted areas with Liquasil’s corrosion primer, it was the coated with Metalseal 20 from Liquasil, using airless spray equipment. The specification for this roof was for a special RAL colour. Only Liquasil can make silicone coatings in any RAL colour, so Metalseal 20 was specified for the project. This roof was completed in Forest Green.

Metal roof and cladding coating using Liqausil's BBA Approved Metalseal

Liquasil Ltd

Metalseal 20 was specified to re-brand a small industrial estate in Swindon. Roofs and external cladding were all stripped of existing finishes using vapour blasting. Cut edge corrosion was treated using SWT Primer and all metal surfaces were coated with BBA Approved Metalseal 20 roof & cladding coating. The finish is now graffiti proof, with any graffiti simply washing off with water, with no ghosting residue. The project is covered by the unique Liquasil latent defects insurance guarantee (including cover for professional design).

Metal roof coating & liquid gutter lining Derbyshire

Liquasil Ltd

This project in Derbyshire involved treating cut edge corrosion, re-coating the roof and lining the gutters. Products used were * Metalaseal BBA Approved metal roof coating system * SWT Primer (to treat rust in the gutters and cut edges) * Liquasil One and Non-Sag Sealer to line the gutters. The project is covered by the unique Liquasil Latent Defects Guarantee, which is written specifically for Liquasil and underwritten by an A-Rated, Lloyds of London insurer.

Asbestos Roof Refurbishment Norwich

Liquasil Ltd

This asbestos cement roof was covered in moss and lichen and had leaks in several places. The BBA Approved Asbestoseal was specified to refurbish the roof and provide extended life expectancy. The roof was steam cleaned and all metal fixings treated with liquasil SWT corrosion primer. All fixings and cracks to the roof sheets were sealed with Liquasil Non-Sag Sealer before the whole roof was coated with Asbestoseal 20. Liquasil's Latent Defects Insurance Guarantee was provided upon completion.

Cut Edge Corrosion Treatment & Liquid Gutter Lining, Snodland

Liquasil Ltd

The metal roof to this large distribution centre was affected by cut edge corrosion and all of the metal valley and eaves gutters were affected and leaking & corrosion. The gutters were first cleaned and dried, then treated with Liquasil’s corrosion primer. All gutter joints were coated with non-Sag Sealer, a highly elastic silicone polymer, before the whole gutter was coated with Liquasil One to provide a seamless gutter lining to prevent further leaks. Liquasil systems are covered by a unique Latent Defects Guarantee.

Liquid gutter liner applied to metal gutter in Glasgow

Liquasil Ltd

This project involved sealing a metal gutter in Glasgow. Leaks were present at most of the steel profile joints and rust was evident throughout. Heavy rust and soiling was first removed and then the entire length of the gutter was treated with Liquasil's corrosion primer, to prevent further rusting. Once cured, Liquasil Non Sag Sealer was applied to all joints. Non Sag Sealer has 1400% elasticity, to cope with extreme thermal movement. The whole gutter was then coated with Liquasil One to form a seamless and leak-free gutter lining.

Cut Edge Corrosion Treatment, Hamilton, Scotland

Liquasil Ltd

The roof of this bingo hall in Hamilton, Scotland was affected by cut edge corrosion. Liquasil's Flexlap cut edge corrosion treatment was specified to solve the problem. All surfaces were first prepared using wire brushes to remove any delaminating finishes, before being prepared with the Liquasil Corrosion primer. Once the primer had cured, the Flexlap hardened silicone top coat was applied to provide a moss and lichen resistant finish, offering 10+ years protection, all backed by Liquasil’s unique, Latent Defects Insurance Warranty.

Asbestos Roof Coating & Roof Refurbishment

Liquasil Ltd

This is an asbestos cement roof coating and refurbishment project completed by Liquasil Approved Installers, Nadco Ltd. The roof was first cleaned and all cracks, small holes and fixings sealed with Liquasil Non-Sag Sealer, providing a permanent seal. The entire roof surface was then coated with the BBA Approved Asbestsoeal 20 asbestos roof coating system.

Cut Edge Corrosion Treatment in Lincolnshire

Liquasil Ltd

The end laps and mid laps to this ageing metal roof were affected by cut edge corrosion. Liquasil's Flexlap system was specified to treat the corrosion, in all, approximately 2000 linear metres. Where sheets overlapped, the bottom sheet was masked off as this does not usually require treatment under the Liquasil system, which was designed by Chartered Building Surveyors.

Asbestos Roof & Cladding Refurbishment Coating

Liquasil Ltd

The finish to the asbestos roof and asbestos cladding on this property was faded and the roof leaked in several places, along with the gutter. Liquasil's silicone roof coating, Asbestoseal, was chosen to seal the roof and dramatically improve the aesthetic appearance using specially made RAL colours to the match the original finishes. The asbestos cement gutter was also lined with the Liquasil liquid gutter liner to form a permanent, bonded solution.

Metal roof coating project in Leicestershire

Liquasil Ltd

Failing factory finishes and cut edge corrosion were present across the entire roof and Liquasil's Metalseal metal roof coating system was specified as the most appropriate solution. The roof was cleaned and all failing finishes and rust was removed as far as reasonably practicable. The roof was then coated. In this case, two colours were employed. Liquasil is the only company able to produce silicone coatings in any RAL colour.

Asbestos roof coating project in Haverhill

Liquasil Ltd

This was the first asbestos roof coating project undertaken with Liquasil products, back in 2013. The roof was heavily soiled and was cleaned using a DOFF steam cleaning machine, delivering 150°c steam to completely kill moss and lichen spores. The metal fixings were treated with Liquasil's corrosion primer and sealed with Non-Sag Sealer before the whole roof was coated with Asbestoseal, the only BBA Approved asbestos roof coating.

Asbestoseal asbestos roof coating project Warwickshire

Liquasil Ltd

Specified because of it's unique BBA Approval and Latent Defects Insurance Guarantee, Asbestoseal was applied to this asbestos cement roof in Warwickshire. The roof was first steam cleaned using 150°c steam, removing all moss and lichen. Metal fixings were treated with Liquasil's corrosion primer and then sealed using Non-Sag Sealer. The entire roof surface was then coated with Asbestoseal 20 to provide long term protection and add considerably to the life of the roof. The metal gutters were lined with Liquasil's seamless silicone gutter lining system

Asbestos roof coating project by Nadco Roofing Services, using the BBA Approved Asbestoseal system

Liquasil Ltd

Another example of the BBA Approved asbestos roof coating system, Asbestsoeal from Liquasil Ltd. The asbestos cement roof was first cleaned using a closed box pressure washer. All waste was filtered and disposed of by a licensed asbestos disposal contractor. Metal fixings were treated with Liquasil SWT Corrosion Primer and then sealed, along with small cracks and holes, with Non-Sag Sealer before the roof was coated with Asbestoseal 20. The project included GRP rooflight replacement and new ridge detail and flashings.

Roof Coating - Flat Roof Waterproofing, BBA Approved

Liquasil Ltd

Liquasil Ultra PU is a BBA approved flat roof waterproofing membrane. Cold-applied, the system comprises an embedment coat, into which a chopped strand reinforcement mat is laid to provide exceptional strength. The mat dissolves and allows for hand-moulding around difficult details. Once cured, the Liquasil PU UV coat is applied to provide additional strength, durability & protection. The completed system comes with the unique Latent Defects Insurance Guarantee, which provides cover for Professional Design. Specify with 100% confidence. Made in the UK.

Metal roof coating project, Milton Keynes

Liquasil Ltd

This 10,000 sq metre roof was in need of complete refurbishment and Liquasil's Metalseal was specified because it provided all parties with complete protection, with a Latent Defects Insurance Guarantee being provided upon completion. Cut edge corrosion was treated and the roof cleaned prior to the application of the single-coat Metalseal 20. The unique Liquasil Latent Defects Guarantee covers safe access, workmanship, materials and specifier's professional management fees, along with Professional Design. BBA Approval adds even more reassurance to the specifier.

Liquid gutter liner to metal gutter

Liquasil Ltd

This metal gutter was leaking in various places and several repairs had been undertaken over many years. Liquasil’s liquid gutter lining system was specified because the SWT primer actively treats any rust that is present and prevents further rusting. All joints and fixings are permanently sealed with Non-Sag Sealer. Non-Sag Sealer is a thixotropic coating with 1400% elasticity that easily copes with thermal movement associated with metal gutters. The final stage is the apply a single coat of Liquasil One along the entire length of the gutter, to provide a seamless, leak-free finish.

Cut Edge Corrosion Treatment Hemel Hempstead

Liquasil Ltd

This is Liquasil's BBA Approved cut edge corrosion treatment, Flexlap, being installed to a large industrial warehouse in Hemel Hempstead during September and October 2018 as part of a refurbishment project. Flexlap was specified because it is less labour intensive and requires fewer materials than other systems. The unique Liquasiul Latent Defects Guarantee was issued upon completion. This covers materials, workmanship, safe access and Professional Design allowing you to specify with 100% confidence.

Asbestos cement roof refurbishment project & gutter lining using BBA Approved Asbestoseal

Liquasil Ltd

This is an asbestos cement roof refurbishment project, using the BBA Approved Asbestoseal system from Liquasil. The roof was first cleaned using a steam cleaning machine and all metal fixings were treated with Lqiuasil's SWT Primer. All fixings and cracks were sealed with Non-Sag Sealer before the roof was completely coated with Asbestoseal 20, providing long term protection against the elements. A 10 year Latent Defects Insurance Guarantee was issued upon completion.

Metal Roof Coating & Liquid Gutter Liner, Oxfordshire

Liquasil Ltd

This is a metal roof coating & liquid gutter lining project carried out at Oxford Brookes University. The roof was power washed and the gutters cleaned before application. The gutters were treated with Liquasil's rust primer to prevent further rusting, before the seamless, silicone Gutterseal system was applied. The roof was coated with a single coat of Metalseal 20 in Goosewing Grey.

Showing 1-36 of 45

Feedback