"joint sealants and fillers"

Rockfon Mono Acoustic's tile/filler/render system was used to control reverberation in a large open plan office.

Stringent specification met using the following FSi products: Stopseal® Batt, PyroPro® HPE Sealant, PipeBloc® PCP Pipe Collars, PipeBloc® EL Pipe Wraps, Pyrocoustic® Sealant and Linear Gap Seal.

Following the building expansion of more than 47,000 m2 the grade-II listed Stanford Hall Estate facility required further fire protection measures to be installed in order to reset its resistance to fire. Nullifire were on hand to recommend the use of FB750 Coated Batts, FS702 Water-Based Intumescent Acrylic Sealant, and FS709 Intumescent Sealant. The combination of these products ensures the fire safety of the building.

Wondertex prem fill & finish has been used to create 540 exceptional apartments at the iconic Tobacco Warehouse in Liverpool.BackgroundThe grade two-listed, 14 storey building was built in 1901 and was thought to be the largest warehouse the world had ever seen – a huge achievement for a thriving city at the heart of global trade.After falling into disrepair, the Tobacco Warehouse has been given a new lease of life and is now home to 540 exceptional waterfront apartments.The ChallengeThe team working at this exciting location includes main contractor Abercorn Construction and architect Darmody Architecture. The team at Abercorn Construction were responsible for installing and finishing the walls and ceilings across a 150,000sqm area. With time of the essence and a durable and smooth finish essential in preparation for decorating, Abercorn Construction chose to use Wondertex prem fill & finish.The SolutionWith over 50 years experience in supplying dryliners and decorators with expert solutions, Wondertex prem fill & finish was the perfect product to ready the walls and ceilings for decorating these beautiful and luxurious apartments.Wondertex prem fill & finish is a filler and smoother, designed for filling and finishing plasterboard joints, smoothing unwanted textured surfaces as well as repairing any accidental damage, snagging or channelling work.Available in two handy sizes, prem fill & finish boasts an extremely smooth texture which allows the product to glide easily into joints – making light work of even the largest of projects, such as this one.What’s more, prem fill & finish has a 60 minute working time, is effortless to sand – there’s no elbow grease required here – and has minimal shrinkage so you can be assured that once applied, prem fill & finish will stay put and will not crack and come out of the joints.Once applied and fully dried, the walls and ceilings were painted with Dulux paint.ResultsThe project was completed on time and residents are now able to move in and enjoy Titanic-sized warehouse homes at the heart of Merseyside’s historic docks.

Penetration and slab edge details using the following FSi products: Flexi-Coat® Coating for slab edge, Stopseal® Batt and PyroPro® HPE Sealant

Installation - Upgrade of perimeter walls Main Contractor - BKS, Specialist Installer - Steel tech, Client - Government of Dubai Date - 2004—2008 the extensive use of Stopseal Batt and Pyrocoustic Sealant

CT1 is Creating Waves in BristolProject Case Study: The Wave, BristolCustomer: Andrew Scott LtdArchitect: APG Architecture CT1, officially voted by an independent survey, as the UK’s Number 1 Sealant and Adhesive is a world leading brand that’s made right here in Britain.CT1 is used by construction professionals in every sector of the industry including roofing contractors, joiners, window suppliers, kitchen fitters, bathroom installers, as well as specialist fit out and building companies working on every possible scale of project from small one of extensions to massive high rise, multi-purpose developments across the country.CT1 replaces several different sealants and adhesives in one tube. It’s the ultimate snag list eliminator providing permanent sealing and bonding solutions, saving time and money by delivering outstanding performance on almost every type of building material in virtually every application.CT1 - The Specialists' Choice of Sealant and Adhesive!When building the groundbreaking Wavegarden Cove project in Bristol, engineering specialists Andrew Scott Ltd needed extremely high preforming, highly deformable and very durable adhesives and sealants guaranteed to endure rigorous and testing conditions in consistently wet conditions, including permanently underwater.The Wave in Bristol is the brainchild of founders Nick Hounsfield and Craig Stoddart, who wanted to create a positive, healthy, well-being destination for people.Designed by APG Architecture, The Wave is a 180m inland surf lake generating up 1000 waves per hour ranging from 50cm in height up to 2m high crashing bodies if water, delivering unrivalled inland surfing experiences suitable for every level from beginners to the seasoned professionals.Finding Sealant & Adhesive Solutions for Challenging Build EnvironmentsWith the originally specified adhesives failing to meet the tough requirements of this complex build, Project Manager Steven Hunt turned to CT1. This was driven by the need for products guaranteed to stand the test of time in harsh, wet conditions, including constantly moving, floating platforms. CT1 delivered superior adhesive and sealant performances while also meeting the client’s environmental and sustainable build values. CT1’s Unique ‘Tribrid®’ TechnologyWith unique ‘Tribrid®’ technology CT1 sealant and adhesive is now 3 times stronger, with 350% elongation, secured colour retention and enhanced performance even in the harshest outdoor applications.Furthermore, CT1 is the high strength, solvent free, environmentally compliant and most ecologically advanced sealant and adhesive available that’s used by construction professionals in every sector of the industry.  CT1 was put through every possible assessment for adhesion, flexibility and strength, exceeding every expectation and providing the architects, specifiers, engineers and clients with assurances and confidence in the success of their project.CT1 not only delivered during the build phase but it continues to deliver while being tested every day by the harsh environment exacerbated by the strength of moving bodies of water and thousands of users. Such has been the unrivalled success and performance of CT1 it has already been specified on Nick and Craig’s next wave project in Scotland. CT1 is Made in BritainCT1 is made in Britain with British technology and British design. Officially voted the UK’s Number 1 Sealant and Adhesive by trades people nationwide, CT1 comprises the very best raw materials and is leading the way in quality, service and technological advancements being made in the construction industry.CT1’s ‘Tribrid®’ technology provides unique adhesion on virtually any material in most applications without the need for additional fixings. Available in ten different colour options it offers specifiers and construction industry experts greater versatility for use in so many more applications.Why Use CT1?Whether you’re an architect, surveyor, specifier, builder, plumber, joiner, roofer, landscaper or DIY enthusiast, CT1 is the sealant and adhesive of choice for every project, packed in every toolbox and immediately on hand to provide the best solution every time.Here’s just 10 of the reasons why:Will bond on virtually every type of construction material in most applications including wood, metal, glass, fiberglass, stone, concrete and most plastics.Incredibly tensile strength of up to 2.9 N/mm2 when fully cured.Environmentally friendly with no detrimental impact on ecological biodiversity.Unique flexibility with excellent resistance to vibration and up to 350% elongation.Works in wet and dry conditions – ideal for marine and boat maintenance.Ultra-violet Resistant.Solvent Free and suitable for clinical and clean room environments.Excellent resistance to chemicals.Will not shrink, dry out or flake.Can be painted.CT1 is available now in all good builders’ merchants nationwide and online from www.ct1.comCT1 – Often Copied but Never Equalled!We Innovate – Not Imitate!Image Credits: The Wave, Bristol

Installation - Protection between compartments in the CAT stand, separating public and kitchen areas as well as other facilities. FSi products used Stopseal® Batt, Pyrocoustic® Sealant, PipeBloc® EL Wraps and Silverseal® Compound.

We supplied Sopro SLC 578 – Self Levelling Compound for this new hard-wearing, super-flat floor in the Newry-based Cottage Dog Grooming & Day Care Newry, County Down.  Sopro SLC 578, supplied by Smet Building Products Ltd is a pumpable, self-levelling, rapid-set, cementitious surface filler, and can be used in conjunction with floor heating internally. Sopro SLC 578 is a pumpable, self-levelling, rapid-set leveller which is great for a quick turn-around, self-build job like this.

Project typeRefurbishmentContractorWilliam Bowley Projects LtdBrief descriptionRecently retired, the clients were looking to move from London to the bustling seaside town of Poole. They found a chalet bungalow at a desirable location right by Poole Park and only a short distance from Poole Harbour & Sandbanks beaches. However, due to it being previously rented out long term, it was in need of a lot of modernisation.The client’s desire was to create a large steam shower area in the master en-suite with plenty of space for them to relax, listen to music and unwind after a busy day.Due to the size and layout of the existing en-suite, and especially its low angled ceilings, careful planningwas required to provide the client with the desired, spacious steam shower without compromising too much on the floor space.RequirementsSteam shower area with sound & lightingThe clients wanted to create an area for absolute relaxation, a private wellness oasis, accessible only from their bedroom.Required components• watertight and steam-proof components with longevity• spacious seating area• practical storage• sound technology• lightingProducts usedBase products• wedi Vapor 85 building boards with pre-installed vapour barrier membrane (SD value of 92)• wedi Sanoasa Bellina seat element• wedi Sanoasa Bellina carrier element• wedi 610 adhesive & sealant• wedi Tools joint reinforcement tape, self adhesive• wedi 620 sealant• wedi Tools waterproof sealing tape• wedi Tools waterproof sealing corners• wedi Tools washers, stainless steelProducts usedIndividual products• 1600 x 950 x 50mm wedi Fundo Riolito shower element(1100mm channel on the long side and DN50 horizontal drainage)wedi solutionsDesigned & built by the installer• a practical and easy to maintain niche for storage(using the trimmings of Vapor 85 building boards)The required technology was integrated into the wedi elements by the installer, providing the clients with the perfect atmosphere to promote well-being.‘Compared with cement board/aqua panel, wedi is truly a superb system; easy to use and fit, lightweight and perfect for tiling over. I will definitely be using wedi for future bathroom installs’Nick Turner, Director at William Bowley Projects Ltd.

This student residence hosts the capicity to house students as well as offering 380m2 of office space. In order to comply with passive fire protection requirements Nullifire recommended the use of FB750 fireproof panels, FS702 flame retardant acrylic sealant, On-Site Water-Based Intumescent Basecoat SC801, and On-Site, Water-Based Intumescent Basecoat SC802. The combination of these products provided all of the necessary safety measures for occupants in case of a fire.

ObjectiveDurkan was established in 1970, the company has grown from a small, family contractor to become a leading construction and development company in London and the Home Counties.Durkan were contracted to construct 55 new build apartments on Amelia Street, London. They required a bathroom product that was easy to install and simple to clean but without comproming on decor choice, Nuance ticked all the boxes.Bushboard have been developing kitchen and bathroom surfaces in the UK since 1935, with the idea that everyone deserves a great design whatever their budget.ObservationThe Nuance product was recommended to Durkan Ltd and once they had researched it themselves they were pleased with the variety available.‘Nuance provided a solution in a variety of colours and finishes which were attractive to our clients.’Nuance is all about great design with a flexible and integrated approach for all bathroom layouts.Whether your design calls for wall hung, semi-recessed or the latest sit-on basins, the range offers co-ordinated or matching surfaces in laminate or luxurious solid surface.OutcomeDurkan specified ‘Ice’ surfaces creating a stylish, sleek finish to their bathrooms.A laminate worksurface gives a smart and integrate design look with little maintenance required.‘No challenges occured during the installation process, it was straightforward.’The Nuance worksurfaces give a real flexibility to shape the perfect bathroom along with peace mind of with a three year joint guarantee when installed with Bushboard’s BB Complete adhesive and sealant.For more information about the Bushboard products, request a RIBA CPD, download an NBS specification or order samples visit www.bushboard.co.uk

Dubai Ski Dome is situated in The Mall of the Emirates in the Al Barsha district of Dubai. It is the second largest Mall in the Middle East being some 2.4 million sq/ft in size. It is the only Ski “resort” in the Middle East. All product endured rigorous testing to ensure that they would be compatible with the extreme low temperatures required to keep the snow good for skiing. FSi Ltd Pyrocoustic Intumescent Sealant was used extensively throughout the Ski Dome.

Client: Royal Borough of Greenwich Council Architect: Frankham Consultancy Group Assembly & Performance:·        All constructions including APL Tritherm™ structural framing system and all as non-combustible assemblies·        Roof – 10,000 m² of APL Energi Twin-Skin: Profile 31/1000RR in stucco-embossed mill-finish aluminium on walk-on roof liner plus all associated flashings, gutters, fixings and sealants, U-value = 0.18 W/m².K·        Walls - 10,000 m² of APL Energi Twin-Skin: Profile AP45HR in RAL 9006 PVF2 aluminium on wall liner plus all associated flashings, fixings & sealants, U-value = 0.16 W/m².K Special Features:·        Client required a 40-year maintenance free material for the roof in the marine location·        Multiple consultants employed by the end client to ensure the construction exceed current building regulation due to the proximity to Grenfell·        APL clamp-end lap detail for the roof to allow for thermal expansion·        APL Firewall™ with 60 minute integrity and 60 minute insulation ™ construction due to boundary walls Building Location:·        London Borough of Greenwich

It is a 200 Acre development to house almost any media based business along with retail outlets, leisure facilities and office space. It includes BBC, University of Salford and ITV as well as the Oasis Academy. FSi Ltd products were used throughout the various buildings to protect the means of escape and compartmentalisation of the development. FSi Products used Stopseal® 60 mm Batt, Pyrocoustic® Fire Resistant Sealant, Stopseal® Ablative Spray Coating, Silver liner® Rainscreen Barrier

Large scale Fluid Concrete installation to all floors, window sills and stairs in Cement Grey colour. Oxicrete finish application to bathroom walls in Brown and Terracotta Red finish.Manufacture and installation of bespoke Gap panels in Rough Mist finish to shower walls.Materials used: Large format Gap GRC wall panels in Rough Mist finish, sealed with hydrophobic agent and clear sealant. Cement Grey Fluid Concrete floor coating and Oxicrete wall coating in Brown and Terracotta Red finish.

On an historic site overlooking the picturesque Grade II listed bridge, Kew Bridge is a new riverside development, where 164 stunning new waterside homes have been built to create London's ultimate riverside address. The development includes apartments and penthouses with views over reflecting ponds and landscaped courtyard. Specified by Universal Sealants Ltd, The Outdoor Deck Company installed Millboard decking across numerous luxury residential apartments creating stunning outdoor spaces with unrivalled views across the River Thames and beyond.

Arranged around several courtyards and atria, Jaguar Land Rover’s new Advanced Product Creation Centre by Bennetts Associates is a series of inspirational, creative spaces designed to foster interaction and collaboration. As part of a refined materials palette, over 5,000m2 of Junckers solid Nordic Oak Classic flooring has been installed to define zones and provide a warm, natural surface. High levels of natural light fill new offices, restaurant and a 400-seat multipurpose hall, all linked by generous internal streets. The company’s latest vehicle models are proudly displayed on the ground floor, where the flooring had to be able to accommodate both the cars and a Stringo, a specialist vehicle moving truck. Working with AC Flooring Ltd, Junckers provided a solid hardwood floor able to take the weight of a five-tonne load. Richard Aylen, Junckers’ Technical Manager worked with AC Flooring and the architects to find the best solution for the floor to withstand heavy loads: “The wooden floor at Jaguar Land Rover’s new Advanced Production Creation Centre was glued to the subfloor using our Parkett Adhesive. Given a suitable subfloor, this is usually the method that will bear the highest loads. Worryingly, there is a trend towards substituting proprietary adhesive products for cheaper brands. A cheaper adhesive generally contains more filler, which will bulk out the product but do nothing for its adhesive properties. The high amount of filler in in the cheaper adhesives has reduced the bonding ability and projects where such products have been used are beginning to fail with large claims being fought in parts of Europe. This is an issue many flooring contractors may be unaware of. By choosing Junckers Parkett Adhesive the client can be confident that they have the best long-term result.” 

In this project, Hush Acoustics were tasked with a project in Douglas, the capital of the Isle of Man, to provide a solution for a beautiful mid terraced property recently converted into 4x spacious apartments over four floors.With the apartments located very close to a road, the issues became apparent after spending some time inside, with road traffic noise as well as public background noise clearly heard.Key to resolving the issues was to ensure appropriate acoustic measures were carried out when converting this existing property into apartments, and that the party walls and/or ceilings met the required standards for conversion under the Building Regulations, Approved Document E.Working with Andrew Bentley, the architect and Kevin Cretney of Kinrade Construction, a solution incorporating the following was provided:HD1044 ACOUSTIC BASEMENT SYSTEMThis system has been created with residential properties in mind and is made up of a combination of materials that offer excellent sound reduction within the specified area.The basement system is made up of Hush Slab 100 which is tightly packed within the joists, Hush Deep Resilient Bars, which are fixed horizontally to the underneath of the joists and Hush Multi Panel which is fixed to the underside of the bars. 15mm of Fireline Plasterboard is then used to over board the Multi Panel.HD1041 ACOUSTIC WALL LINING SYSTEMThis system has been thoroughly tested to exceed Building Regulations and our competitor’s wall lining products. It is made up of Hush Multi Panel, the 15mm Fireline which is then installed over, ensuring joints are staggered. The perimeters are sealed using Hush Isolation Tape, as well as our Acoustic Sealant. These boards are then fixed to the Deep Resilient Bars and Hush Slab 25 is fitted in between. The Bars are then fixed horizontally to the wall.The benefits of this system are its high standards of airborne sound reduction, can reduce both flanking and direct sound transmission and creates a minimum loss of space.HD1038 HUSH ACOUSTIC FLOOR SYSTEM MF28This floor system is a highly rated performer and has again been thoroughly tested within areas that require exceptional acoustic control. Made up of Hush Panel 28 which is laid over the chipboard deck and sealed using Hush Seal 20. The Hush MF Ceiling System is then installed to the underside of the joists, to the back of the plasterboard lining. Hush Slab 100 is then installed tightly within the ceiling void. Two layers of plasterboard is then installed to the underside of the MF system and all perimeters sealed with the Hush Acoustic Sealant.Outstanding resultsTests carried out on completion of the acoustic treatment showed immediate results, which completely exceeded the acoustic requirements for conversion within the Building Regulations and also surpassed New Build standards.Chartered Architect, Andrew Bentley, said, "Thank you for all your help and support. I will be happy to use your products again in future."

Jubilee Bridge was constructed in 1977 - chloride contamination was causing corrosion of the suspended and cantilever reinforced concrete support beams, half-joint elements and the soffits of the beamsICCP was used to protect cantilever beams, half-joints and suspended slab elements. Over 8,500 anodes were drilled in and are controlled in 20 zones with separate control of the beams and the half-joints.

Furnitubes designed and manufactured bespoke Akri raised planter beds and integrated seating, framed in corten steel – which we chose for its long term durability in outdoor environments. It’s also a great choice where damage to the steelwork might occur. Planter units were sealed using a protective sealant in order to avoid staining on users’ clothing and the surrounding paving and surfaces. Picnic table units were incorporated to provide adequate resting space for public use. Providing a whole range of new playing experiences, Russell Gardens has been transformed for the betterment and wellness of the local community.

Project: Manufacture and installation of external GAP cladding panels using hidden fixings and chemical anchoring. Client: Stuart Forbes Associates Materials used: Bespoke size external GRC cladding panels in Rough Mist finish, treated with hydrophobic agent and clear sealant. This exciting new refurbishment project of a private house in Wimbledon, London brought with it plenty of manufacturing and installation challenges! The designers’ vision called for 2m x 1.2m large format GAP panels with mitred edges to be seamlessly wrapped around the building. The panels had to be millimetre perfect to avoid any cutting on site.

UltraScape’s BS 7533 Compliant Mortar Paving System has been used in the construction of Birmingham University’s new state of the art library. O’Brien Contractors installed hard and soft landscaping around the prestigious new library, which included 1200m² of yellow rock granite. paving. UltraScape’s Pro-Bed HS provided a perfect bound base. It can be laid up to 75mm in one pass. A special order of Flowpoint buff was produced for this project to compliment the paving elements. UltraScape’s Paving Guard surface sealant was applied once the grout had set to help preserve the installation.

On this fast turnaround project we worked closely with Apteriors; Interior Design and Furniture Specialists and McLaren Construction to manufacture and supply outdoor concrete furniture for new multipurpose recreation and study area for New Regent’s College in London. Living Concrete supplied 4 large Let’s Dine Concrete Tables and 12 concrete cube seats with oak cladding which were assembled on site and finished with a specialist sealant. Product Spec: Let’s Dine Table Size: height 70cm x length 200cm x width 100cm Finish/ Colour: Mist Hand-cast GRC concrete Indoor and outdoor use

FlexEJ has designed and manufactured lateral expansion joints with Inconel 625 bellows designed to install in existing pre-cast concrete forms.The London City Airport terminal expansion is being built on a concrete deck supported on over 1000 piles. Between the sections of the deck there can be movement and where critical services pass between sections a fully enclosed expansion joint is required.INSTALLATIONDesigning the expansion joints for installation at site into the existing concrete sections was a challenge. FlexEJ designed and supplied installation tooling which allowed the expansion joint to be inserted into the concrete from one side – complete with internal removable pre-extension bars – and then finally seal welded.FURTHER DETAILSIf you are interested in finding out more about our expansion joint design and manufacturing capabilities, or if you have enquiries for utility related projects, please contact our Technical Sales Team on +44 (0) 1384 881188 or send an email to sales@flexej.co.uk.

More than 150 metres of UNIFOLD® was installed at HM Land Registry, Coventry.This installation utilized the UNIFOLD® patented clip-joint system designed to allow joints to be competently and successfully completed behind obstructions and where access is particularly difficult.The existing gutter systems installed on the roof of the building were manufactured from GRP (Glass Reinforced Polyester).The GRP gutter joints had broken down due to thermal movement, for which this material is particularly prone.In order to ensure the integrity of the lining, system expansion joints were strategically introduced to induce Unifold to move in complete unison with the gutters beneath.This was the second HM Land Registry building to receive UNIFOLD®. The previous installation was in Leicester.

A thick tile floor covering meant a reduced floor section buildup, plus reduced construction joints to aid tiling. Ground floor 45mm Gyvlon ECO over 90mm insulation on a beam and block substrate First Floor 45mm Gyvlon ECO on a precast plank substrate. Gyvlon was used to reduce the floor build on both floors plus reducing the need for construction joints. This gave the client more flexibility on the thick floor coverings and eased installation with reduced construction joints.

FlexEJ has completed the design and fabrication of a batch of metal expansion joints for a UK pharmaceuticals manufacturer.Specifying an expansion joint in a pharmaceutical production line can be problematic. For this project, the piping design required expansion joints but a fundamental requirement was ease of cleaning and a complete avoidance of product retention.A possible solution could have been a pharmaceutical rubber expansion joint which is crevice free but its inherent design limits its flexibility and – as with any rubber expansion joint – it has a relatively low operating temperature limit.This formed the basis of the specification brought to FlexEJ’s engineering team. The design case was to meet 270 Deg. C and 10 Bar G with a high degree of flexibility so a metal bellow would be best suited to this application. But in a conventional bellow or expansion joint the convolutions are prone to retain product or contaminants. A liner can sometimes be used but again product can get behind the liner so the problem is not entirely eliminated.So how to maintain the highest standards of cleanliness inside the bellow once installed and in operation? The solution lay in designing a specific ‘open’ convolution profile which prevents contaminants getting lodged within the joint. The team’s clever design of profile, combining with the unit being used in vertical alignment leads to the bellow being self-draining – and at all movement positions. To achieve the high levels of purity and cleanliness required for this application’s flowing media, the bellow had to be fabricated in 316 stainless steel with a very high surface finish.The expansion joint also includes threaded mounting bars – these enable the bellows to be contracted slightly to enable easy removal from the pharmaceutical line when required. The smooth, polished rods seen in the image here are limit bars to prevent accidental over-extension. Each joint is also fitted with pharmaceutical grade aseptic flanges – smooth on the inside and sealed with an ‘o’ ring. On completion, the complete units were electro-polished for additional surface improvement and cleaning – and that gives them their photogenic qualities seen here.If you are interested in finding out more about FlexEJ's range of pharmaceutical & aseptic metal bellows, please contact our Technical Sales Team on +44 (0) 1384 881188 or send an email to sales@flexej.co.uk.

This metal roof had already been treated with a well known cut edge corrosion system, which had begun to fail in multiple areas due to water becoming trapped between the overlapping roof sheets, which had been sealed with silicone sealant. Flexlap system is made from a specially hardened silicone, designed to resist environmental dirt pick-up as well as providing a much smoother finish. Liquasil does not recommend that the gap between overlapping roof sheets is sealed. Any moisture that might be present can escape or evaporate naturally, which is how built-up steel profile roofs are designed to work.

This Edwardian office building in a London west end conservation area has undergone a remarkable transformation, re-emerging as luxury apartments. The project, led by architects De Metz Forbes Knight, redesigned and updated the stone-fronted property on the corner of Great Portland Street and Langham Street, which boasts high windows and fine London. We were appointed to design, supply and install 71 heritage casement windows which would reflect the original styling yet provide modern thermal containment. We created the windows using Slimlite double glazed units with larch frames, and also applied EPDM sealant to further contribute to energy efficiency.

When the Gatwick consortium began renovation on the South terminal of Gatwick Airport they needed to ensure that the new floors were protected against movement of the daily traffic that they endure. Genesis provided a solution; working with the architects and installation contractors a cost effective Stainless Steel Movement Joint was selected from the Genesis range. Renovations been part of an £850million investment to see the replacement of floors and ceilings and enhance the experience travellers receive; Genesis movement Joint meets and exceeds all standards of Movement Joints and will save the floors from cracking long into the future.

High-end residential refurbishment that required MicroCement installation to all internal walls and floors in two family bathrooms. This large scale, refurbishment project showcased innovative ways MicroCement can be applied to interior bathroom walls and floors without a need for joins or breaks. Its smooth finish was ideal for a modern, minimalist design that our client wanted. MicroCement can be easily installed over existing materials which in turn reduces the time needed for application and maintenance.We also supplied and installed two large precast and hand-polished concrete washbasins that were done in Mist Silk finish. They were treated with our in-house sealant and made to be stain-resistant.

Main contractor John Sisk & Son Ltd looked to specialist roofing and cladding contractor Richardson Roofing Ltd to provide solutions for the various roofs, cladding and façades that make up the exterior of this visually stunning complex.Fixfast provided all the necessary components: including stainless self-drilling screws, lacquered stainless steel screws for the colourful façade areas. together with the many different sealants and accessories needed for such a wide variety of applications. "Gone are the days of waiting weeks for colour matched fixings to complement powder coated flashings and fascias. Fixfast are able to turn around lacquered fasteners within a week thanks to their in-house spraying production line"Andy Inman - Director at Richardson Roofing Ltd

Tricky floor refurb? Our Smet Supported Partner, contractor, Ciaran McAteer uses a practical solution for the professional flooring contractor or tiler.  VS 582 is a self-levelling smoothing screed with excellent mouldability for laying to falls. A flexible, self-levelling, mouldable, rapid-set, cementitious, fibre-reinforced surface filler, with 2-in-1 formulation for simultaneous levelling and creation of falls. Excellent workability and mouldability because you also have the flexibility of adding water.It’s strong, with a compressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls), dries quickly and is pumpableBenefits of Sopro VS 582:3 – 70 mm coat thickness For floors, indoors and outdoors2-in-1 formulation: suitable as self-levelling filler and for laying to fallsCompressive strength after 28 days: approx. 35 N/mm² (as levelling coat laid to falls)Flexural tensile strength after 28 days: approx. 7 N/mm² (as levelling coat laid to falls)Self-levellingOutstanding mouldability when laid to fallsQuick-dryingFlexible, fibre-reinforcedPumpableSuitable for timber flooringSuitable for floor heating systemsLong working life: 30 – 40 minutesWalkable after 2 – 3 hoursNo client is too large or too small, SMET delivers another innovative, showcase flooring solution. Click here at other jobs using our Sopro levellers.SMET is renowned for its comprehensive range of professional CE marked, EPD certified products. The SMET flooring range includes; calcium sulphate-based screed binders, self-smoothing calcium sulphate-based screeds & compounds, cement-based screed binders, self-smoothing cement-based screeds, lightweight flowing screeds, professional tiling materials & tools, tanking and wet-room solutions, barrier coats, primers & bonding agents; for any domestic, commercial, industrial or design-flooring use.Suffice to say, the SMET product portfolio includes a German-made floor solution for any new or repair flooring requirement. Get in touch for your upcoming floor screed or tiling project.

Richard Bowler wanted to tackle noise transference as part of his basement flat renovation in Autumn 2020. He turned to Oscar Acoustics to solve the issue cost-effectively, choosing Iso-Mount Type1 acoustic hangers to dramatically reduce noise from the house above with minimum ceiling height loss.Quality soundproofing is fundamental to the enjoyment of our homes. High levels of noise can affect our health as well as our sense of wellbeing. So, when Richard planned a complete revamp of his basement flat, part of his nineteenth century, four storey Devon property, he was determined to factor in sound insulation, while also creating a beautiful interior finish.Problem: Lack of sound insulation“Dating from 1850, the basement flat was of very poor construction and in need of complete renovation,” clarifies Richard. “In particular, with respect to the seven different ceilings of the flat and the ground floor of the house, there were undersized joists, making it uneven, bowed and springy. The wooden floorboards in the house had large gaps between them, and the ceiling of the flat was constructed with thin plasterboard. This meant no sound insulation at all - even a conversation could be fully overheard.”Solution: Soundproof ceiling with minimum ceiling height lossRichard wanted a fast, cost-effective, and easy to install solution to solve the noise problem. He discovered Iso-Mount Type1, an isolating acoustic ceiling hanger which significantly reduces transmission of noise from the floor above but only loses 6mm of ceiling height. Further with this choice, it’s possible to carry out all work from the room below."I selected Iso-Mount because it was simple and easy to install with extensive video instructions,” Richard says. “My builder, had never installed an acoustic ceiling, so it was important to find a solution he was confident with."“I did not fully appreciate at the time, but the use of Iso-Mount with an industry standard metal channel was a huge bonus and cost saver. We have saved a great deal of time and money using the adjustable Iso-Mounts to level the uneven joists.”Process: Simple installation of acoustics hangersRichard’s builder, Mark Lipton started the Iso-Mount Type1 installation in one of the smallest rooms of the flat. Within two days, he was confident using the height-adjustable acoustic hanger.Marks says, “Initially I was unsure about the system as I had not used it before. I started with the bedroom as it seemed the easiest to install. Once that was done it was easy to fit the other ceilings. The living room was the largest room and the most uneven in terms of joists. The ceiling went up in no time.”“One of the nice features of the system is that it is easy to create a false ceiling to run services. It was also useful in complex areas where, for example, we had a concrete lintel to accommodate. The fiddliest part of the whole install is fitting the rubber isolators to the mounts. On the other hand, achieving perfectly level ceilings was very easy.”“We used belt and braces which included the Iso-Mounts, the acoustic tape, the sealant, foam filler, acoustic insulation, and two layers of SoundBloc plasterboard,” says Richard. “The SoundBloc was the most challenging install since it was much heavier than ordinary plasterboard and my builder had to work hard to install it. From my perspective it is only marginally more expensive and worth it for the extra isolation.”   Result: A ‘superb’ soundproof ceiling systemWith installation completed in ten days, Richard was delighted with the ceiling.  “For acoustic isolation, the Iso-Mount system is superb. It even created a perfectly flat ceiling despite the uneven joists above. Noise transfer between house and flat is far, far reduced. When experiencing noise transfer now it is normally through an open door or window rather than transmitting through the floor/ceiling." “We had no woodworking or fillers to add or level off. We simply used the adjustable Iso-Mount for reduced noise transfer. The Iso-Mount system is a brilliant way to isolate between floors and I couldn't be happier with the results. The ceiling is superb and flat as a pancake despite the uneven joists above. I highly recommend it."Ben Hancock, Managing Director of Oscar Acoustics, says: ‘Unwanted noise can negatively impact on our lives at home, and affect our health. With over 43 years of acoustics and soundproofing experience, we developed the Iso-Mount system to manage and reduce sound transfer reduction between floors, to help restore the peace and create a tranquil home environment.”

OBJECTIVEFileturn Ltd have supplied high quality interior fit-outs, refurbishments and construction services to a wide range of high profile clients for more than thirty years.When pairing with St Giles Hotel, they wanted to create stunning bathrooms that gave a luxurious feel but were totally unique.Nuance is a unique panelling range, it is 100% waterproof, trim free and is an ideal alternative to tiles as it is six times faster to install than tiles and is becoming the fastest growing product in today’s bathrooms.OBSERVATIONSThe unique selling points of Bushboard Nuance, means it is ideal for refurbishments as well as new installations where down time needs to be kept to an absolute minimum.Bushboard understands that a hotel room that is out of action can cause huge loss of earnings so they provide a 48 hour free of charge sample service along with panels that can be installed in a matter of hours.‘We have used similar products on other contracts but Nuance stood out from the rest. Very easy to install and work with.’The Bushboard Nuance range offers flexibility to shape the perfect bathroom. The postformed panels and the standard tongue and groove panels can be linked together with BB Complete adhesive and sealant ensuring you have a water tight joint, as well as a 15-year guarantee, giving you complete peace of mind.OUTCOMEFileturn specified Bushboard Nuance, Natural Greystone in Roche texture creating a modern and desirable space.‘Our client loves the result and is very happy with the appearance of the panelling in the showers.’Bushboard strive to develop materials, manufacturing process and installation techniques to make aspirational products more affordable.‘The Bushboard team were very helpful and we would definitely use the Nuance product again.’The specification team at Bushboard thrive on helping contractors and support projects from start to finish, ensuring they are nurtured to a mutually successful conclusion.For more information about the Bushboard products, request a RIBA CPD, download an NBS specification or order samples visit www.bushboard.co.uk or call 01933 232204.