"glass"

Based in the heart of Clerkenwell, Hangrohe’s newshowroom aims to create a hub of inspiration, excitementand resources for the international architect and designcommunity.Interior design company I-AM created a brandexperience, integrating moving, working water as well asmore abstract, artistic features.Working showerheads and mixers are set against thebackdrop of a 4D-mapped ‘digital waterfall’ animatedartwork, whilst window display features billowing fabricevocative of water flowing from a tap.Showcasing more than 200 products, the Water Studiostrikes a balance between inspiration and expertise. Itis a working space, a creative sanctuary and studio foreducation and collaboration.I-AM approached Allgood to provide a contrastingaddition to the showroom in the form of the Holt range.Comprising of door and bathroom accessories, Holt ismade oak and hand finished.Bespoke length pull handles were crafted for the existingglass entrance doors, continuing the interior’s warmingaesthetic. Due to their exterior use, a new externallacquer was applied, in order to shield the handles fromvarying outdoor conditions.In the bathroom area, the Holt approved documentM pack was installed, showcasing the range’s abilityto cater for the disabled, whilst contributing to thebathroom’s decor.

Raiz cocktail bar is a trendy nightspot in the centre of Ponta Delgada, the bustling capital of the Azores. A busy venue, popular with locals and tourists alike, Raiz bar is a modern, industrial design, featuring exposed steel beams and glass walls with steel staircases connecting two floors. It was important to the owner, Gabriel, that as a main feature of the building design, the steelwork was not only protected against corrosion and fire, but also looked good, to enhance the ambience of the bar.One night, soon after closing, a fire took hold. The fire raged through Raiz bar destroying many fixtures and fittings and causing a substantial amount of damage. Initially it was thought the cause was from an electrical short-circuit, but having been ruled out it is now being investigated as a deliberate, criminal act. The fire burned for three hours before being brought under control and finally extinguished by the fire crews. Being outside of opening hours, the building was empty and fortunately no one was hurt.As the damage was assessed, it became apparent that the steel structure remained intact. Gabriel’s choice of Hempel’s intumescent coatings not only protected the steel against the heat and flames, but allowed additional time for the Fire Department to bring the fire under control.

When the government instructed people to work from home during the Covid-19 pandemic, the gym where Wirral-based personal trainer Megan Hewitt worked closed down. So, Megan and partner Dan decided to build a fitness studio in their garden to allow her to conduct video personal training sessions during lockdown. To ensure the 6m x 3m timber frame building would be suitable for use all year round, it was essential to insulate the roof and walls.The couple researched various types of insulation online and narrowed it down to Mineral Wool because of its thermal performance and fire safety. They had three other considerations: it had to be good at blocking noise, have excellent sustainability credentials, and be easy to install, as they planned to fit it themselves.Just one product for all applicationsTheir research showed that Knauf Insulation 50mm and 70mm OmniFit Slab ticked all the boxes. It is a multi-application slab, meaning the couple didn’t need to purchase separate products for the roof and walls. What’s more, it offers a higher level of thermal performance than alternative versatile slabs on the market.It is manufactured from Glass Mineral Wool and is non-combustible with a Euroclass A1 Reaction to Fire Classification, meaning it will not add to the development or spread of a fire should it occur.Keeping quietAs any exercise fanatic knows, a good workout needs a strong soundtrack and Megan wanted to motivate clients without becoming a noisy neighbour. OmniFit Slab provides excellent levels of acoustic performance thanks to its open fibre structure that absorbs sound waves.Insulation that doesn’t cost the earthSustainability was another important factor for the couple. Like all of Knauf Insulation’s Glass Mineral Wool insulation, it is manufactured from up to 80% recycled content, mostly used glass bottles and jars that would otherwise go to landfill.It is also manufactured with ECOSE® Technology, Knauf Insulation’s unique bio-based binder, which contains no added formaldehyde or phenol. ECOSE® Technology is made from natural raw materials that are rapidly renewable and is 70% less energy-intensive to manufacture than traditional binders, so it is more environmentally-friendly.Products made with ECOSE® Technology are soft to touch and easy to handle. They generate low levels of dust and VOCs (volatile organic compounds) and have been awarded the Eurofins Indoor Air Comfort Gold Standard.Its softness was a benefit that Megan noticed during installation. She said: “I remember helping my Dad with our ‘old-school’ Mineral Wool loft insulation when I was younger and it was horrible, it irritated my skin for 24 hours after. But the OmniFit was fine – there was no irritation whatsoever.”Installation was no sweatA tight fit between joints is essential to eliminate gaps that can reduce thermal and acoustic performance, but with some types of insulation it can be difficult to achieve the high quality installation required. OmniFit Slab is manufactured to provide friction fitting to ensure all joints are sealed correctly. Despite having no previous experience, Megan, Dan and a friend fitted the 40m2 OmniFit Slab themselves over the course of a day.“Before fitting the insulation, we watched an installation video on YouTube,” said Megan. “We followed the techniques shown and it was really easy to install. We had no problems at all.”“I’m delighted with the finished result. When the fitness studio was finished, we kept turning up the stereo to see whether the insulation really was soundproof – even at full blast, you couldn’t hear the music outside. It’s amazing.”“Before we put the insulation in, I was exercising in winter gear with the radiator on full – now the studio is lovely and warm. I’m back in vests and I haven’t had to put the heating on at all.”Thanks to Knauf Insulation OmniFit Slab, Megan and her clients can enjoy a high energy workout in a warm, safe environment – without disturbing her neighbours. What’s more, the insulation is sustainable and will ensure the studio’s energy consumption and carbon emissions are low over its lifetime. Note: Megan, Dan and her friend maintained social distancing guidelines during the insulation install. Megan continues to follow government guidelines for the operation of gyms and exercise facilities, conducting her sessions online when in-person training is not possible.

Wrexham General Station is a main line railway station and the main railway station serving Wrexham, north-east Wales. The station was first opened in 1846 and expanded in 1912. It comprises four operational platforms with two disused bay platforms at the southern end of Platform 1. Until the early 1980s what is now Platform 4 of Wrexham General, was a separate station: Wrexham Exchange.After working with MPH Construction on a number of station refurbishment projects across Wales, the Principal Contractor approached Twinfix to carry out the survey for the canopy refurbishment at Wrexham Station as well as designing, manufacturing and supplying the replacement roof glazing for 3 of the platform canopies at the station. The panels were installed by a third-party roofing company.The work spanned 532 square metres and comprised of the innovative Multi-Link-Panel Non-Fragile (NF) system glazed with 6mm Georgian wired polycarbonate.Each panel of the innovative Multi-Link-Panel NF system comprises of a powder-coated aluminium frame and fitted with polycarbonate glazing. The panels are built completely off-site in a quality-controlled factory environment, reducing the risk, and cost, of site mistakes, and are delivered on-site fully glazed and ready for rapid installation. The system has a unique linking design feature that results in incredibly quick installation times, making the system very much suited to rail work due to its restricted possession times.The Multi-Link-Panel NF system is an innovative roof glazing product that has been well utilised for many years on station canopy roofs, and it has been thoroughly tried and tested in that time.It was the chosen system for this project for a number of reasons:sustainability– these panels are virtually unbreakable in manufacture, transit and in situ, meaning that, unlike glass, maintenance costs will be eliminated.safety– Twinfix Multi-Link-Panel NF (Non-Fragile) conforms to the HSE recommended test method ACR[M]001:2019 (as outlined in document HSG33) and achieves a ‘B’ Classification.off-site construction– The panels are pre-assembled in Twinfix’s factory ensuring strict quality guidelines are adhered to, which is not always guaranteed when roofing products are assembled on site.ease of access– The Multi-Link-Panel NF system can be fitted with In-Line Access Hatches, to allow cleaning of gutters and roof. These hatches are hardly visible and allow safe access through the glazing without needing to get on the roof.weight– The Multi-Link-Panel NF is light in weight and due to its modular format, it is very quick to install which allows for short rail possession works.appearance – The Georgian wired polycarbonate glazing combines the appearance of Georgian wired glass with all the material benefits of polycarbonate. As well as improving the overall environment in a lighter, brighter station, the addition of the Twinfix Georgian wired polycarbonate at Wrexham General Station has preserved the building’s unique appearance and character, while providing modern levels of safety for passengers and staff.

Central M40, a 70 acre industrial estate situated off J11 of the M40 in Banbury, comprises six warehouses totalling over 1 million sq ft of accommodation – equivalent to roughly 17 football pitches. The estate was developed speculatively by db Symmetry*, who specified CA Group’s robust Twin-Therm® Built-up Roof and Wall systems.A key component of the Twin-Therm® building envelope system is Therma-Quilt, a bespoke high-performance Glass Mineral Wool insulation. It is manufactured by Knauf Insulation specifically for CA Group and is the result of a long standing partnership between the two companies.Therma-Quilt is ideally suited for non-residential cladding applications. It offers outstanding performance and functionality available in different thicknesses to support the Twin-Therm® system, delivering enhanced thermal U-values as low as 0.09W/m2K. It is non-combustible with a Euroclass A1 Reaction to Fire Classification, meaning it will not contribute to the development or the spread of a fire.Therma-Quilt is also a high-performing acoustic insulation. In Twin-Therm® roof applications, it helps reduce the drumming effect of rainwater, while in Twin-Therm® wall applications, it aids with sound reduction and can minimise the reverberation of internal sound when used in conjunction with perforated metal liner sheets. Therma-Quilt has been developed with water resistance in mind and uses materials that help prevent water ingress.The Twin-Therm® system has been designed with sustainability in mind and Therma-Quilt is no exception. Knauf Insulation’s Glass Mineral Wool products contain up to 80% recycled materials. This saves on virgin raw materials and energy demands, cuts carbon emissions, and reduces waste going to landfill.It is manufactured with ECOSE® Technology, Knauf Insulation's unique bio-based binder that contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable and is 70% less energy-intensive to manufacture than traditional binder, so it is more environmentally-friendly.Products made with ECOSE® Technology are soft to touch and easy to handle. They generate low levels of dust and VOCs and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort.In total, more than 70 tonnes of Therma-Quilt insulation were used on the six megasheds on the Central M40 development. While the industrial estate was built speculatively, its strategic location has previously attracted premium occupiers including Hellofresh, Prodrive Motorsport, TVS Supply Chain Solutions and Rinkit.Thanks to the Twin-Therm® system with its Therma-Quilt insulation, the warehouses have achieved BREEAM ‘Very Good’ ratings, while the businesses using them will enjoy more comfortable, warmer and safer working environments – and lower energy costs. *db Symmetry has rebranded as Tritax Symmetry

ChallengeThe much acclaimed architect Zaha Hadid created the design for the Riverside Museum, which has already been dubbed ‘Glasgow’s Guggenheim’.The new riverside Museum provides an exciting new home for Glasgow’s transport collection. The development has a riverside location on a site where the River Clyde meets Glasgow’s other main river the Kelvin, and is adjacent to Glasgow Harbour.The dynamic new Riverside Museum displays Glasgow’s rich industrial heritage, which stems from the River Clyde. The Tall Ship is berthed alongside the Museum, creating a fantastic experience in this stunning setting.The brief for design and build roofing specialist Varla (UK) Limited was to find a flexible insulation that could meet the demanding U - value of 0.20 W/m2K that was continuous over both the walls and the complex 18,000 square metre roof. The Glasgow Museum of Transport is a complex, heavily engineered design and was the first major UK project for the renowned architect Zaha Hadid.Specialist Roofing contractor, Varla (UK) Limited started the search for a suitable material by contacting many insulation suppliers and holding supplier seminars at Varla’s Chester offices, challenging suppliers to propose a solution to meet the demanding specification for this unique project.SolutionVarla (UK) Limited chose to use Knauf Insulation’s FactoryClad Roll 32, a flexible insulation that meets the demanding U-value of 0.20 W/m2K across both the roof and walls.Rigid foam boards were ruled out early on, as they could not be fitted to the building’s complex curves. There was also a limited cladding zone that could not be altered. Many types of insulation were considered, but glass mineral wool roll provided the best thermal efficiency. The key to Knauf Insulation’s products being specified on this project was its ability to provide in-depth technical support, including complex three-dimensional heat flow modelling calculations. This allowed Knauf Insulation to produce a solution that met all of Varla’s insulation requirements by using a double layer of 100mm Knauf Insulation FactoryClad Roll 32. This is a flexible, lightweight roll of resilient Glass Mineral Wool with exceptionally high tear strength and a thermal conductivity of just 0.032 W/mK.In addition, Knauf Insulation FactoryClad Roll 32 is ideal for limiting the spread of fire since it holds a Euroclass A1 reaction to fire classification for non-combustibility and will not burn. Nor will it give off toxic smoke or suddenly ignite in a fire due to ‘flashover’. For public buildings such as this, superior fire performance is crucial.Once Varla (UK) Limited had decided on Knauf Insulation, it leaned on them heavily for technical support, utilising the unique 3D heat loss calculation support service, which ensured the correct product thickness was specified to meet the demanding project requirements.

The University of Salford’s new Science, Engineering and Environmental (SEE) building features a white RainScreen façade, punctuated by contrasting red window reveals with a sloping sill to form recessed windows. While this creates an impactful design statement, it proved challenging when it came to evaluating the RainScreen insulation performance.The thermal performance challengeFrom the outset the designers, in conjunction with the University, outlined a desire for non-combustible insulation. But the feature red reveal details meant there were restricted cavity widths near the windows, which would affect the depth of insulation that could be installed. Several Mineral Wool insulation manufacturers had been unwilling to undertake U-value calculations. This was because it was challenging to understand the weighted U-value across the different façade build-ups and determine the U-value uplift required to compensate for the shallower window reveal areas.Architects Sheppard Robson had previously worked with Knauf Insulation and engaged its Project Specification Team to discuss the challenge and develop calculations.After receiving the plans, Knauf Insulation undertook 3D U-value calculations and confirmed that they could meet the required thermal performance – and crucially it would mean no changes to the design or impact on the cavity widths.Accurate 3D U-value calculationsSo how could Knauf Insulation meet the brief when other manufacturers could not?The crucial factor was the type of U-value calculation used. Most manufacturers use the standard method, which calculates the U-value for the build-up without the metal substructure. Because this method doesn’t consider the effect of the metal penetration through the insulation, a blanket correction factor is added, which can lead to the under- or over-specification of insulation. Either way, it means that the insulation used in the finished project may not deliver the thermal performance that has been specified. And in the case of the SEE building, calculating the weighted U-value to prevent this was critical.Knauf Insulation uses numerical modelling (also known as 3D U-value calculations) as standard for all RainScreen façade projects. This methodology thermally models the build-up taking into account the complex interaction between the insulation and the bars and brackets of the steel framing system (SFS). As a result, it creates the most accurate available picture of how the build-up will perform thermally after construction.For the SEE building, the team undertook several different calculations changing elements of the build-up, including the substructure material and insulation widths, until they determined the optimal combination.High performance insulationBy using this rigorous calculation method, Knauf Insulation was able to meet the brief with a combination of 50mm and 160mm Rocksilk® RainScreen Slab, along with 200mm OmniFit® Slab 35.Rocksilk® RainScreen Slab is a Rock Mineral Wool slab that is BBA certified for use at any height and for the broadest range of thicknesses and build-ups on the market. It has a thermal conductivity of 0.034 W/mK.OmniFit® Slab 35, a Glass Mineral Wool slab with a thermal conductivity of 0.035 W/mK, is ideal for use in the SFS.Both Rocksilk® RainScreen Slab and OmniFit® Slab 35 are non-combustible with the best possible Euroclass A1 reaction to fire classification so they will not contribute to the development or spread of fire should it occur. Thanks to their sound absorption characteristics, critical for low mass rainscreen structures, they will help create a quieter environment for the computer and science labs.A sustainable solutionThere was one other specification factor to consider – sustainability. The SEE building had been designed to minimise its environmental impact in line with the University of Salford’s campus master plan.Matthew Taylor, the project architect from Sheppard Robson, noted: “From early on, sustainability has been high on the SEE building agenda, including becoming one of the first all-electric University educational building.” The building will also be supported by photovoltaic panels on the roof.But while the use of renewable energy sources and high performance insulation will help lower the building’s operational carbon, it was important to keep embodied carbon to a minimum.Here Glass Mineral Wool scores highly too because it has the lowest embodied carbon of any mainstream insulation material.Knauf Insulation has proactively reduced the embodied carbon in its products over the years, as part of a broader set of activities to reduce its environmental impact. Specific actions to minimise its carbon footprint include initiatives to reduce road miles in both sourcing and distribution.For example, its Glass Mineral Wool products are manufactured using up to 80% recycled content, including glass collected from the local communities around its factories. The finished products are then compressed by up to 10:1 to fit more product into each lorry reducing transport related carbon emissions.Another innovation is ECOSE® Technology, its unique bio-based binder contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable and is 70% less energy-intensive to manufacture than traditional binders, so it is more environmentally friendly.Products made with ECOSE® Technology are also soft to touch and easy to handle. They generate low levels of dust and VOCs and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort.Ongoing supportThe through-wall build-up was installed by Metclad Contracts. As this was the first time they had worked with Rocksilk® RainScreen Slab, they also turned to the Specification Team for installation advice. They wanted to know whether the insulation should be fixed into the sheathing boards or the SFS.Knauf Insulation provided details of the fixing pattern together with the installation guide. They also facilitated meetings with their fixing partner to provide specialist technical support about pull out values and requirements for fixing into the substrate.Thanks to Knauf Insulation’s extensive technical expertise and ongoing support, the vision for the University of Salford’s state-of-the-art SEE building has become a reality – without any compromise on thermal performance, fire safety, acoustic or sustainability.

Britannia Leisure Centre is a new multi-sport community complex in Hackney. A key driver for the client was that the building should have a compact footprint. This was achieved by stacking the facilities, creating a rooftop MUGA with tennis courts and 5-a-side football pitches.Lang+Fulton supplied the external grating panels which crown the building and offer panoramic views of London. These were made from their Terra-34 grating which features an anti-climb aperture. The narrow panels were designed to continue the architectural theme of the building’s columns and vertical elements and were finished in a graphite grey ppc to compliment the neutral palette of stone, concrete and glass.In addition a grating screen was supplied to secure the upper levels of the stairway providing natural daylight and through visibility to the entrance atrium and cafe area.The steel grating also conformed to the requirement for material durability and low maintenance which were key specification considerations.Philip Glanville, Mayor of Hackney has written, 'I am so proud that we have delivered one of London’s best leisure centres, with absolutely incredible facilities that are affordable for people to enjoy'.The Britannia Leisure Centre has received multiple awards including Overall Building of the Year (New London Architecture).

Project: Teeside University, The CurveProduct: Gustafs Linear Rib in OakArchitect: Austin-Smith:Lord, LiverpoolInstaller: BAM ConstructionArchitect: Austin-Smith:LordTeeside University, The Curve Teaching and Conference Centre.Photo by Martine Hamilton KnightSpecification: Gustafs Linear Rib Oak30 & 38mm Deep 22mm GapsQuantity: 6,535 linear metres 941m2LSA Projects Ltd are proud to share with you one of our favourite Gustaf Linear Rib projects; The Curve Building at Teeside University in Middlesborough. The new £20 million, 4 storey campus features classrooms, conference facilities, and space for exhibitions and events as well as a large lecture theatre.The new building, part of a £30m regeneration designed by Austin-Smith:Lord Architects of Liverpool, is raising the profile of Teeside University as a leading institution for higher education in the UK.The Curve precedes upgrading and refurbishment of the science and engineering facilities at the University as well as an extension of the health and fitness centre.Gustafs Linear Ribs are predominantly found in the main atrium and break-out space in The Curve, the natural Oak veneer and 22mm gaps (36% open area) provide the space with acoustic dampening as well as colour, warmth, and texture. The ribs make for a stunning contrast with the clean white walls and stairways and the glass facade fills the space with natural light.

A careful combination of A2 fire rated soffit panels, rainscreen cladding and mesh screens from Proteus Facades has helped band together the impressive new £42m Sciences Centre at Durham University. Based within the grounds of the Upper Mountjoy Campus, the new Mathematical Sciences and Computer Science building has been developed to create synergy between the two departments, which have been earmarked for significant growth within the Durham University Strategy – 2017-2027. The building features state-of-the-art teaching facilities and office space, including a specialist IT Lab with a designated server room, a 120-seat tiered lecture theatre and tutorial rooms. While a café and breakout spaces, as well as four enclosed courtyards make up the communal areas. Creating a bright space for students, staff and visitors to meet and relax, Proteus Facades manufactured striking 2.0mm Aluminium Proteus IP interlocking planks with a PPC Traffic White Matte (RAL 9016) finish for use on the façades of the four internal courtyards. GSS Architecture chose the Proteus IP aluminium PPC in Traffic White because it accentuates and reflects natural light creating an enhanced ambience in the teaching spaces that face onto the courtyards, whilst complementing the glass curtain walling system.

BACKGROUNDBayer is a global enterprise with core competencies in the Life Sciences field of healthcare and agriculture. Its products and services are designed to benefit people and improve their quality of life.Spiralis is a specialist in the design, planning and supply of coordinated interiors ranging from structural elements to furnishings and accessories. With the experience of professionals who have been active globally in the office space planning and office fit out industry and the clear objective of delivering the highest quality level at every stage of the process.BRIEFAs part of the fit-out to the refurbished offices at Bayer, MIDDAS were appointed by Spiralis to design, engineer and manufacture a screen to divide the work space within the area. The screen was to be fixed to one side with a sliding element to the other. The design called for a hexagonal pattern which would be reflected throughout other elements of the interior fit out.SOLUTIONWorking with the Spiralis team, MIDDAS developed a bespoke solution which met the design brief for a flush glazed sliding screen, mounted on a hexagonal pattern, powder coated frame which is removable to allow periodic cleaning of the glass.CLIENT QUOTE"MIDDAS have invested in advanced technology to give them an edge on complex manufacturing challenges.  Nothing is beyond them it seems.”Spiralis Europe Ltd

Aurora is a first-class, highly sustainable office building in the heart of the city of Bristol and one of the greenest offices outside London and among only six in the UK to achieve a special BREEAM 2014 Outstanding Environmental Award for its sustainability credentials. Aurora, which provides 95,000 square foot of Grade A office space on the Floating Harbour, also achieved LEED ‘Gold Standard’ and is currently the only building in Bristol to exceed BCO design guide criteria.The aim of the design was to provide a space that is efficient, offers maximum natural daylight and promotes health, wellbeing and productivity amongst users. To achieve this inspiring working environment Lusso provided and installed the glazed partitions to create a stunning glass atrium within the 7-storey building. This was a challenging design which involved close collaboration between Lusso, Bush Consultancy, and Willmott Dixon to create a system where the framework floated off the slab edge. The structural complexity of this atria required a bespoke solution, which involved close collaboration with the architects from conception.The Lusso 25M single glazed framed system was used within the interior of the building which allows the maximum amount of daylight possible uniformly spread throughout the interior making Aurora, arguably, one of the best office space Bristol currently has to offer.

Gent Sint-Pieters railway stationCHALLENGE Gent Sint-Pieters, the main railway station in Ghent, is undergoing a spectacular metamorphosis today. The listed main building, constructed for the 1913 World Exhibition, has to remain untouched. Behind the old building however the platforms, waiting rooms and the central passengers corridor are being entirely refurbished. Architect Voncke’s objective was to create a pleasant atmospheric site with a 35,000 sqm open and attractive central hall, broadened and completely covered platforms and renovated rails. Functional, well-designed and above all spacious! As the 12 rail tracks had to stay on ground level, the passengers alley was excavated to a lower level under the railroad tracks. This necessitated permitting considerable daylight to enter the underlying levels.SOLUTION Transparent canopies, featuring large glass sections and translucent floors were all designed with this purpose in mind. To gain even more light the architect chose RENOLIT ALKORBRIGHT for waterproofing the platform canopies. The six long rectangular platform blocks, differing in height, are interconnected and make one large roof. The white highly reflective RENOLIT ALKORBRIGHT membrane on top of the construction reflects the daylight through the high side windows. A clever way to add extra day-light to the underlying areas. 

111 The Strand, is an eight storey landmark office and retail building in central London. The property occupies a corner position on the Strand with a return frontage to Savoy Place. The majority of the 30,549 ft² office space is let to CVC Capital Partners.The iconic building is well-known for its contemporary appearance. The limestone façade with metal frames with curved bays of stone and glass, and a stone relief depicting the surrounding area truly stands out.With the recent acquisition of the long leasehold office building, the private equity firm CVC Advisors Ltd found it time for a complete refurbishment. The existing reception area and office floor 1 to 6 were stripped and upgraded to Category-B Standard. This is inclusive of new MEPH installations and a commercial kitchen fit out to service the meeting room suites and dining areas.Stravifloor Channel, a floating floor system using isolated steel channels with proprietary elastomeric pads, four layers of plywood, and a special damping layer was installed in the catering kitchen on the 5th floor of this fit-out project. The isolated steel batten system with enhanced stiffness was designed to minimise the transfer of impact noise to the office floors below.During the installation, an elastic Perimeter Strip was applied around the floors’ perimeter, to completely decouple it from the building structure.

New corporate headquarters for a growing independent distiller called for the perfect blend of outdoor infrastructure to reflect its strong local identity.Ian Macleod Distillers (IMD) embarked on the new HQ project after outgrowing its nearby Russell House head office.The £4.5 million development features two prominent glass towers representing the traditional ventilation shafts of Scottish whisky distilleries.And when it came to the design and creation of the building's outdoor spaces, Broxap's Litchard range provided a similar timeless yet unique aesthetic for the site.Working for Clark Contracts, Broxap designed, manufactured and installed a suite of furniture including two Litchard Picnic Units and 16 Litchard Benches.Our teams collaborated with the project leaders to create 8 Litchard Seats, as well as tables and short benches, to specific dimensions to enable unique group seating configurations.A Palisade Brise Soleil adds another dimension to the breakout space. Door barriers, complete with tapping bars to meet Scotland’s disability access standards, completed the project.The main building delivers 10,000 sq ft of office space for IMD and is the commercial hub for the independent family firm which owns brands including Edinburgh Gin, Glengoyne, Tamdhu and Smokehead.

Our client, One 17 Design, acted as Architects, Interior Designers and Project Managers for this superb project with involvement from inception through to completion. Their brief was to create a home office / garden room in the grounds of an existing detached home, which was done by extending the detached garage.The material palette for the garden room predominately featured oak and steel. Blackened oak cabinetry and steel fenestration provide a striking contrast against the natural oak frame and cladding. Clever detailing in the relationship between the oak frame and steel doors adds a contemporary twist. The bricks for the outside of the building were selected to match the brickwork of the existing bungalow. Bespoke Clement steel windows and doors from the W20 range were chosen for the project, including an interior door, fitted with reeded glass that leads to the bathroom. All handles were powder coated black to match the steel frames.The project won “Best amazing space” at the 2022 Northern Design Awards.Freddie Garside, Partner and Director at One 17 Design, said:“We and our client were delighted with the finished doors and screens. The narrow framed black steel doors complement the natural oak frame perfectly. Clement were very professional, efficient and responsive throughout the whole project.”Photography: Joe Cotterill

The owner of this house wanted to build a purpose-built home to meet the needs of his growing up family.  He wanted to live in the village he grew up in but at the same time it was important that the design embraced new concepts and ideas. The end result is a stunning contemporary luxury home that incorporates large glazing areas throughout. There has been a careful use of traditional stone, wood and also unique metal cladding detail with the external design. Internally the feeling throughout is minimalistic clean lines, with the furniture being a perfect complement to the end result. With the exception of the switchable privacy glass for the window adjacent to the front door, the inclusion of completely concealed fully automated blinds to all other windows are the ’Grand Finale’ to this beautiful home.  When not required the blinds are completely concealed but at the press of a button or using their mobile devices, blinds appear as required – providing shading, sun protection, privacy or blackout blinds as required.A feature of interest is the large gable window in the master bedroom.  Here Honeycell Duette® blinds have also been concealed within the sloping ceiling and again appear from their hiding places when required showing that irregular shaped areas can benefit from the Blindspace headboxes which can be made to conceal almost any blind available on the market.

The design brief Our brief from Heatherwick Studios was to design, supply & install a free spanning self-supporting 3D triangular rooflight, to replace a more traditional rooflight that was supported by secondary steel.The ChallengeA rooflight of this type would normally be fully fabricated and welded as a single frame off-site. The challenge was in the installation of the rooflight as stick construction to align the connection correctly so the glass lines would be true against the framework and the engagement correct. There was only a +/-2mm tolerance.The SolutionThe rooflight is 9m x 4m and is fully self-supporting, modelled with in our SOLIDWORKS 3D design software. The supporting members are a combination of 50mm x 120mm and 50mm x 80mm steel sections. The scope of the overall project was to provide offices for Heatherwick Studios. British designer Thomas Heatherwick founded Heatherwick Studio in 1994 to bring craft, design, architecture and urban planning together in a single workspaceGet in touchWhether you’re at planning or construction stage why not see how we could help you add natural light and space to your commercial office space; you can call us on 01223 792244 or pop us an email via info@nextgenrooflights.co.uk outlining what help you need.

A bespoke new home complimented by curved bespoke glazing and moreThe ChallengeOur client wanted to create a truly unique environment to enjoy wide open views of their ample garden, the countryside and stunning sky views for a spacious room that linked two parts of their new build’s dwellings together. The homeowner wanted to both emphasise and compliment unique features of the construction to let the outside in with an abundance of natural light and controlled natural air ventilation. The SolutionCollaborating closely with the client we create a bespoke curved multi-panel rooflights which followed the unique structure of this spacious room. These bespoke curved multi-panel rooflights had low-profile rafter supports so that from the ridge of the curved roof to the eaves the pitched glass roof gave the maximum feeling of height and space. This gave an abundance of natural light to flood in and with the addition of electric opening vent rooflights that allowed the homeowner to control the natural air ventilation in this stunning example of modern living in rural Hertfordshire. Whether you’re at planning or construction stage why not see how we could help you add natural light and space to your home; you can call us on  01223 792244 or pop us an email via info@nextgenrooflights.co.uk outlining what help you need.

This premium retailer required security shutters for their icon building on the corner of South Molton street, that still afforded passer by a view into the store when it was closed to showcase the incredible products in-store.The ChallengeThis premium retailer required security shutters for their icon building on the corner of South Molton street, that still afforded passer by a view into the store when it was closed to showcase the incredible products in-store.Bosideng was created in 1976. Devoted to down jacket research, design and production, and now available in over 72 countries including their UK London flagship store on South Molton Street.Given their their premium apparel and high level of interior design/merchandising, led them to the Tube & Link product. Bosideng was created in 1976. Devoted to down jacket research, design and production, and now available in over 72 countries including their UK London flagship store on South Molton Street.The SolutionThe Tube and Link security shutter uses small steel components to create large openings, for very high levels of vision through the shutter while it is closed.It is commonly installed on shop fronts, either indoors as a standalone barrier (such as within shopping centres), or behind glass on a street front scenario. This version benefits from an aluminium box and guide system.