"fire stopping"

To meet the fire stopping requirements for a major new residential development in Salford, PFC Corofil has provided a proven range of fire-stopping insulation systems.

PFC Corofil’s proven range of fire-stopping insulation systems form part of the façade system and will maintain fire compartmentation at a stylish new high-rise residential development in Manchester.

For a major new residential development in the Salford area of Greater Manchester, PFC Corofil has provided a proven range of fire-stopping insulation systems as part of the façade system and to maintain fire compartmentation of the buildings.

A fully integrated cancer treatment centre that will provide exemplary care to the local community. The Christie at Macclesfield encompasses over 28,000 sq ft at a key corner on the Macclesfield General Hospital estate.

At Exeter Park, PFC Corofil offered technical solutions by our ASFP trained technical team for a fully tested range of cavity barriers to enable Longworth design team to specify the correct barriers for each location throughout the open façade.

Products used: CW-FS | Perimeter Barriers and Firestops for Curtain WallingWhen it came to providing a proven range of fire protection solutions for a revitalised building in London highlighted by a sweeping and technically ambitious curved façade, Siderise was able to meet the challenge with its CW-FS curtain wall fire stop system.

Coopers were commissioned to design and manufacture a bespoke curtain barrier system that, in the event of fire, would guard against smoke penetrating the upper floors of the store. Through regional partner Souchie, Coopers installed a series of Smoke Stop™ vertical smoke curtains above each escalator specifically designed to protect the means of escape for customers, whilst at the same time dramatically reduce the transmission throughout the building of life threatening gases generated by fire.

We’ve been a strategic partner with Willmott Dixon for several years now, ever since our Fire Door FoamTM was mandated on their ‘Yellow Book platform’.  The online manual exists to enable their staff and supply chain partners to use verified products on their projects. To meet their careful criteria we had to demonstrate the foam’s high-performance fire-stopping capabilities when installed between different substrates and timber fire doorsets.  As such a safety-critical component, we also had to provide its third-party test certification from Certifire, IFC and Warringtonfire to assure them of its credentials.Ryan Atkinson, Senior Strategic Buyer at Willmott Dixon comments“Fire and Acoustic Seals Fire Door FoamTM is now listed on our ‘Yellow Book platform’ – Willmott Dixon’s online guide to preferred materials, site installation and workmanship best practice. The foam went through our rigorous diligence checks to ensure it meets the set criteria required to become a specified product in the guide and to become a key component of the Willmott Dixon standard kit of parts. This product represented a rounded view of quality, cost and time which are some of the key factors we consider when selecting products for our ‘Brand Standard’.”Our Fire Door FoamTM has since been used on many Willmott Dixon projects across the UK. One of these is the high-profile Perry Barr Residential Scheme in Birmingham which will provide 1,400 much needed new homes in the city when complete.Ashley Devonport, Senior Quality Manager at Willmott Dixon comments“Fire and Acoustic Seals Fire Door FoamTM has been used to seal the gaps between the door and substrates on the apartments, risers, and communal areas on the prestigious Perry Barr Residential Scheme. This product is mandated on our Yellow Book platform and was selected for its excellent fire-proofing properties and independent test evidence. Julian and the team also provided excellent product training and speedy technical support when needed.”Contact the team for more information about Fire Door FoamTM. 0121 521 2179 | sales@fireandacousticseals.co.uk 

THE PROJECTThe Jackson fire rated project features freestanding mailboxes that conform to the BS476 Part 6 & 7. The small bank of fire rated mailboxes are installed internally in a residential building to securely store mail for residents. The mailboxes have the use of support legs which are secured to the concrete floor with heavy-duty fixings. Support stands are colour coded to match the same finish as the bank of mailboxes.Mailboxes that meet the BS476 Part 6 & 7 will satisfy the demands of fire protection in most cases, and provide an affordable alternative if the surface spread of flame and non-flammable materials are acceptable. The mailboxes feature an inward sprung flap, which is a standard feature across the fire rated mailbox range. An intumescent strip is placed on the internal side of the mail flap, which expands when the temperature increases and ensures that the flap is kept closed – stopping the oxygen flow into the mailbox and reducing the risk of fire spreading through the mailbox.An alternative fire rated solution is that mailboxes are manufactured to meet the BS476 Part 22, this group of products contain a series of features and benefits that result in a ‘one-hour integrity’ rating. As a result of the comprehensive collection of features, this product range is the premium option.PROJECT DETAILSProject Type: Private ResidentialProduct: Fire Rated 2 MailboxInstallation: FreestandingFire Rating: BS476 Part 6 & 7Accessories: Identification Nametabs/Support legs

Product:Surespan 140° thermally broken aluminium smoke ventilator and roof hatch designed to EN12101-2. ]The AOV also offers push-button comfort ventilation in one package! This one-stop solution for smoke vent requirements to meet building control can achieve 1m² airflow and is available in standard stocked sizes or made to any size in between 900 x 900 and 1260 x 1260. Wind deflectors to improve airflow. RE 1,000 Ventilation 10,000 Vent Offset mechanism for Roof Access Snow Load SL500 Wind Load WL1500 Temperature Class T (-15°) Fire Resistance B300

The FM company of a large Yorkshire Hospital engaged with wall & door protection specialists, Yeoman Shield, to resolve the unsightly and problematic damage that was occurring to fire doors in a busy specialist unit.Such damage, caused by the everyday passage of people, trolleys and equipment, if not attended to, may have become detrimental to the functioning of the fire doors.Yeoman Shield were able to provide a comprehensive fire rated door protection system, which when installed does not affect the fire integrity, to help combat and break the damage cycle, helping to prolong the life of the doors.Door Edge protectors, either FD60 or FD30, according to a doors rating, were installed to the vulnerable leading and hinged edges of the door to prevent chipping and splintering and helping to maintain the recommended 3mm gap between doors and frames.The leaves of the doors were covered with Yeoman Shield’s 2mm thick FalmouthEx protection panels at either full or half height dependent on where the impact was more prevalent, preventing dents or holes from manifesting in the future.Standard glazing beads were replaced with PVCu clad units, complete with corresponding intumescent strip, helping to protect an element of the door much prone to damage.A further part of the fire door refurbishment project was the addition of an Architrave and Stop Lath protection system. These systems come complete with hardwood (stop lath) or MDF core (architrave) with a PVCu cover and as such not only becomes resilient to impact damage but eliminates the requirement for redecoration and repair.Yeoman Shield were able to provide fire certificates for all parts of their fire door protection system offering compliance assurance to the client.For more information on Yeoman Shield cost effective wall & door protection systems go to www.yeomanshield.com or call 0113 279 5854.

Chippenham Pit Stop is a family-run motorway service station on the M4, incorporating offices and modern meeting facilities. In order to complete the redevelopments, the site required a modern-design led carpet tile that needed to be fit for heavy contract use. Heckmondwike supplied its Odyssey commercial carpet tiles, which provide a uniquely creative finish to any development. Perfect for architects, developers and designers, Odyssey is a distinctive fibre-bonded carpet tile that delivers both style and substance. It can also be paired with Supacord for break-out areas.

Stockport NHS Trust runs both community NHS services and Stepping Hill Hospital, which serves people across the areas of Stockport and the High Peak.With the responsibility of the safety and comfort of so many patients and staff, it is important that the trust maintain a high-quality standard within the built environment.When fire doors in the ground floor corridor of the hospital were identified as having minor damage to edges and panels, the trust engaged with Yeoman Shield to provide a solution to stop the damage from becoming a major concern. Left unchecked this type of impairment can lead to the non-conformity and malfunction of a fire door.Yeoman Shield supplied and installed fire rated FD30 Door Edge Protectors to the leading and hinged edges of double swing door sets along the corridor.Door faces were fitted with Yeoman Shield 2mm thick FalmouthEx protection panels, to guard against impact damage mainly caused by the movement of wheeled and motorised trolleys.Now that the hospital’s fire doors have Yeoman Shield protection fitted, the life cycle of the doors will be extended, avoiding the costly task of replacing them.Yeoman Shield door protection products have been fully fire tested to the current standards required.For fire test and product information on the complete range of wall and door protection go to www.yeomanshield.com or call 0113 279 5854.

This scheme was designed by the architects Hawkins Brown and constructed by Mace, who were very easy to work with and have a great project team.One of the main challenges of the project was the fact that is was being constructed during lockdown, and both design team and project team were all working from home, but because of such good communications across the teams, everything flowed very well. N06 East Village is located at the site of the former 2012 Athletes Village and close to the London Olympic Park 2012, so there’s plenty of sports locations nearby!The façade sections were constructed using a modern method that involves some manufacturing and assembly being completed offsite. They were pre-assembled and fixed offsite onto the precast concrete floor units and this new high rise construction solution, removes the need for scaffolding Because each floor is fully enclosed, it reduces project time and the risk of site operatives working at height and increases project speed time with less labour needed on site. This was especially beneficial considering construction was during the Covid-19 pandemic. It is believed that throughout this project there was 40% less vehicle movements to and from site and 70% less site waste created.*We supplied the original Quadra metal riser doors throughout the two residential towers however we have since improved the doorsets and they are now Quadra+. N06 East Village project has a modern interior with bright, bold colours featured on both the inside and the outside façade. Selo’s concealed riser doors were a perfect fit with their interior design providing a sleek, flush solution throughout the corridors.This project was one of the first major projects that we supplied our Quench fire-stopping protection to after they requested a factory fitted fire stopping solution. Quench is a safe and reliable solution that is pre-fitted to the riser door frame, removing the need to apply intumescent mastic. It has a 120minute fire resistance rating when used in conjunction with Selo’s Quadra+ riser door system. This solution removes the need to work inside the riser to apply the intumescent and thus removing the fall risk and hazardous working environments.*Source: https://www.cast-consultancy.com/knowledge-hub/plot-n06-east-village/

A record number of manual call points were maliciously activated across England for the year ending March 2022.The highest annual number of malicious false fire alarms on record came as people returned to public buildings en masse in a period markedly unaffected by COVID-19 lockdowns.The latest Home Office figures reveal there was a total of 3,212 false fire alarms caused by the “malicious activation of [a] fire call point/alarm” in England for the year ending March 2022, surpassing challenged hoax calls as the largest reason for malicious fire alarms.Accidental activations also increased over the period; 14,452 false fire alarms were recorded due to the accidental and careless activation of life safety equipment, including manual call points.Every false alarm is costly, disrupting schools and businesses, placing unnecessary strain on our emergency services and reducing public confidence in fire alarms.Despite online learning, working from home and limits on social contact, false fire alarm numbers, although down, persisted during the pandemic.As schools, offices and shops saw reduced attendance and footfall, malicious false fire alarms survived; now in a post-COVID world, there has been a boom in the number of false alarms plaguing the country.Continuing to be the largest incident type, false fire alarms accounted for 40 per cent of the incidents attended by Fire and Rescue Services in England for the period – fires accounted for just 26 per cent.Repeated false alarms reduce the public’s confidence in fire alarms, contributing to alarm fatigue and a complacent attitude toward evacuations. Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and as a result, fails to react appropriately in an emergency.Safety Technology International manufacture a range of protective covers, specifically designed to prevent false alarms whether accidental or malicious.The STI story began in 1980 with a challenge by a school headteacher who wanted to stop their false fire alarms. Founder, Jack Taylor, used his expertise in security systems to invent the first and original Stopper® polycarbonate protective cover. From integral covers to outdoor and sounder models, there are now variations to suit all applications.The tamper-proof polycarbonate covers ensure call points are protected without restricting legitimate use in a real emergency, a combination of optional warning alarm, flashing beacon and break seal acts as a deterrent against malicious activation.In Wales, malicious false fire alarms rose by 33% to 426 during 2021-22, the highest figure for half a decade. And with similar figures reflected across the UK, over £1 billion is lost every year due to false alarms.To recoup this cost the London Fire Brigade became the first fire service in the country to recover costs from buildings like hospitals, airports and student halls with a poor false alarm record.Firefighters respond to fire signals as if they are real, this exposes the public and fire crew to unnecessary risk in their swift response to false alarms, directing them away from real emergencies.Under The Regulatory Reform (Fire Safety) Order Act 2005, it is the responsibility of the building owner or the “responsible person” to ensure effective fire precautions are in place to protect staff, customers or visitors.Several precautionary steps can be implemented to prevent false fire alarms before they occur; routine testing and maintenance of call points is a must to ensure proper operation, but it is not the only proactive approach.As recommended in BS 5839-1:2017, manual call points can be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b), that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”

Every false fire alarm is costly, but in a post-COVID world, there is now even more pressure on the leisure, retail, and hospitality industries to prevent false alarms in their premises.The leisure, retail, and hospitality industries were hit hard by COVID-19; as we begin to emerge from the pandemic businesses will be keen to make up for lost time, avoiding the loss in revenue caused by false fire alarms.Home Office figuresDespite two years of restrictions and lockdowns, false fire alarms continue to cost the UK, Home Office figures reveal that there were a total of 2,497 false fire alarms caused by the “malicious activation of [a] fire call point/alarm” in England for the year ending September 2021 – surpassing challenged hoax calls as the largest reason for malicious fire alarms.Accidental activations too remained a significant cause of false alarms; 12,732 false fire alarms were recorded due to the accidental and careless activation of fire alarm and fire-fighting equipment, including manual call points.With the restrictions, closures, and reduced footfall faced by businesses, we might have expected to see the number of false fire alarms fall significantly during the pandemic. This serves as a timely reminder of the persistence of unwanted fire alarm signals, and the need for leisure, retail, and hospitality premises to seek a solution to avoid further disruptions post-COVID.Although necessary once a fire alarm sounds, a preventable evacuation ultimately means unhappy customers, disruption for businesses, and unnecessary strain for our stretched emergency services.At a time where it is prudent to avoid the crowded corridors and large gatherings at assembly points that follow a needless false alarm evacuation, it has become even more important to prevent false alarms.Continuing to be the largest incident type, false fire alarms accounted for 41 per cent of the incidents attended by Fire and Rescue Services in England for the period – fires accounted for just 27 per cent.Over £1 billionWith similar figures reflected across the UK, over £1 billion is lost every year due to false alarms. To recoup this cost the London Fire Brigade became the first fire service in the country to recover costs from buildings including leisure, retail, and hospitality premises, with a poor false alarm record.A false alarm is defined as a fire alarm signal caused by means other than a genuine fire, which has activated a fire detection and alarm system, these can include: equipment false alarm, environmental influences, accidental damage, and inappropriate human action, including the malicious activation of a manual call point.Under The Regulatory Reform (Fire Safety) Order Act 2005, it is the responsibility of the building owner or the ‘responsible person’ to ensure effective fire precautions are in place to protect staff, customers, or visitors.Several precautionary steps can be implemented to prevent false fire alarms before they occur; routine testing and maintenance to call points is a must to assure proper operation, but it is not the only proactive approach.BS 5839-1:2017As recommended in BS 5839-1:2017 manual call points should be fitted with a protective cover to prevent false fire alarms. The British Standard Institute recommends in section 20.2b, that: “All MCPs should be fitted with a protective cover, which is moved to gain access to the frangible element.“It is now recommended that a protective cover is fitted to a Type A manual call point to help prevent false alarms.”Following the introduction of the new recommendations in 2017 malicious false fire alarms have fallen by 18%, an indication of the effectiveness of protective covers, however, every false alarm is still costly.Firefighters respond to fire signals as if they are real, this exposes the public and fire crew to unnecessary risk in their swift response to false alarms, directing them away from real emergencies.LeisureLeisure premises are particularly susceptible to false fire alarms, whether it be wayward sports equipment in sports hall and gymnasiums, or high-traffic areas in music venues, cinemas, and theatres.Concerts, football matches, and even pantomimes have all been interrupted mid-performance in the UK, and in some cases even cut short by false fire alarms – resulting in disgruntled fans and calls for refunds.Government fire safety guidance for theatres, cinemas, and similar premises, highlights the need for protective covers to combat both accidental and malicious activations: “To reduce the risk of malicious or accidental operation which may promote panic you should consider as part of your management plan alternative arrangements such as the guarding of manual call points (e.g. with a simple, easily removed, cover).”A hinged cover around a call point is also likely to solve the problem of accidental activation or damage in storage areas where there is a continual movement of equipment.Whilst guidance for open air events and venues draws attention to the high risk of malicious activations in certain public areas, such as large beer tents – in this instance, alarmed call point covers might be more effective.RetailFor retail premises, trollies and shopping bags threaten the accidental activation of manual call points and the evacuations that follow threaten both a loss of customers and profit. However, robust polycarbonate covers can be fitted to protect sensitive break glass units and deflect heavy blows.This is reinforced by the Government’s fire safety risk assessment for shops: “False alarms from electrical fire warning systems are a major problem (e.g. malicious activation of manual call points) and result in many unwanted calls to the fire and rescue service every year.”Shopping centres and supermarkets are regularly forced to evacuate hundreds of shoppers due to unwanted fire alarm signals; abandoning their shopping on conveyor belts, baskets, and trollies. Owing to the disruption many choose not to return to complete their purchases.HospitalityThis phenomenon can be particularly detrimental for the hospitality industry, where evacuations following false fire alarms leave restaurants and bars vulnerable to incidents of “dine and dash.” Some hospitality premises have lost out on upwards of £1,000 when customers walked off without paying after a false alarm.Fire safety guidance for licensed premises reinforces the need to put a stop to false fire alarms within the industry: “Fire alarm systems should normally conform to the current edition of BS 5839, with consideration made for prevention of false alarms.”Alarm fatigueRepeated false alarms reduce the public’s confidence in fire alarms, contributing to alarm fatigue and a complacent attitude towards evacuations. Alarm fatigue occurs when a person becomes desensitised to an alarm due to repeated false alarms and as a result, fails to react appropriately in an emergency – having potentially fatal effects.The Manchester Woolworths fire in 1979 is a devastating example of alarm fatigue, as the fire alarm sounded customers were reluctant to leave the store. By the time they realised they were in danger, it was too late, ten people died in the blaze.Alarm fatigue also poses a serious threat to the hospitality industry, with Government fire safety guidance for sleeping accommodation, such as hotels, stating: “If there are excessive false alarms in your premises, people may become complacent and not respond correctly to a warning of a real fire. In such circumstances, you may be failing to comply with fire safety law. All false alarms should be investigated to identify the cause of the problem and remedial action taken.”In some areas of hospitality premises, such as function rooms in a hotel, call points can be vulnerable to malicious and accidental activations – to reduce this risk, protection for manual call points is advised.Some hotel guests react casually to fire alarms, often wrongfully believing them to be a “hoax” or “prank”, reducing response time and delaying evacuation. As recommended in BS 5839-1:2017 manual call points can be fitted with a protective cover preventing false alarms whether accidental or malicious, halting alarm fatigue.Call point protectorsSafety Technology International manufacture a range of protective covers, specifically designed to prevent false alarms whether accidental or malicious.The STI story began in 1980 with a challenge by a school headteacher who wanted to stop their false fire alarms. Founder, Jack Taylor, used his expertise in security systems to invent the first and original Stopper® polycarbonate protective cover. From integral covers to outdoor and sounder models; there are now variations to suit all applications.The tamper-proof polycarbonate covers ensure call points are protected without restricting legitimate use in a real emergency, a combination of optional warning alarm, flashing beacon, and break seal acts as a deterrent against malicious activation.As we enter transition to the “new normal” it is imperative the leisure, retail, and hospitality industries prevent false fire alarms in their premises. Conforming to BS 5839-1:2017 to protect manual call points from false activation, whether accidental or malicious. Not only to aid economic recovery post-pandemic but to keep fire safety at the forefront of customers’ minds. Failure to address false fire alarms allows alarm fatigue to manifest, and this can prove to be costly – in every sense of the word.

NV Buildings is one of the most prestigious and iconic residential sites in Greater Manchester.The distinctive sail-shaped buildings are a major landmark in Salford Quays. The blocks have a curved main elevation providing a unique aesthetic on the skyline and are one of the most popular developments in the area.With a prominent location in Salford Quays, adjacent to the Lowry Theatre and Media City TV headquarters, the apartment blocks feature in many iconic photos of the area.The project itself was funded by the Building Safety Fund, the Government’s £4.5 billion fund to remove unsafe non-ACM cladding on residential and mixed-use properties that are 18 metres and over and do not meet building safety regulations.Our Approved Installer QFF Facades were contracted to complete the exterior wall insulation and rendering which upgraded the fire performance of the cladding, ensuring the safety of both the building and residents.Three 15 storey blocks were refurbished, with a safe and thermally efficient façade solution.Our ServiceWe worked in close partnership with QFF Facades throughout the duration of the project.Deliveries and install were strictly monitored and a very systematic approach was followed. A planned install programme was agreed to ensure minimal disruption to the residents of N V Buildings, who remained in their homes while the work was carried out on this prestigious site.We produced a bespoke specification which included various detailing such as soffits, balconies, and full height panels.A partnership approach was vital, as we worked with QFF Facades, Thomasons Consulting engineering, and the fire officer to agree upon and deliver specific detailing at abutments, openings, and for the drained cavity of the façade system.Particular attention to detail was afforded to the drained cavity fire-stops, including fire-stop details between floors, at party walls for each apartment and around openings.As part of our service commitment, our technical team were available to provide hands-on-guidance, offer support, technical guidance and ensure high levels of quality.Technical Project DetailsAfter testing, the existing cladding had been deemed a fire safety risk by experts and therefore needed to be removed and replaced with anon-combustible alternative.The project was a strip-and-refit of a drained cavity external wall insulation system, which included an expanded polystyrene insulation system.Our Approved Installer QFF Facades installed a K Systems Exicco M, Drained Cavity External Wall Insulation System for steel frame buildings, utilising Mineral Wool insulation. This high performing system provides high levels of fire resistance and non-combustibility.The fire classification of the façade for N V Buildings was upgraded to A2-s1, d0 and therefore complies with the latest building regulations, ensuring the safety of its residents.For the finish, high-performance thin coat silicone render (Silicone TC) was specified. Our Silicone TC render has a number of fantastic advantages including ease of application, and its hydrophobic properties make the render low maintenance. Available in a wide range of colours the topcoat finish used on NV Buildings is a light grey to match the original façade, meaning aesthetically the iconic buildings maintained their distinctive design.

With fire doors under close scrutiny in the aftermath of Grenfell, the public’s trust in their ability to protect lives and assets urgently needs to be restored. Rebuilding confidence in fire rated doorsets needs a focus on every element of its construction, with one of the most critical elements being the intumescent seal. Intumescent seals have now been used in fire rated doorsets for four decades. They help to stop the spread of fire and smoke, with the most common types in the UK being manufactured from compounds of sodium silicate or intercalated graphite.

Project DetailProject: St Bernard’s HospitalLocation: London, UKProduct: ITS.11204 Surface slide arm closer with cushion stopProject DescriptionSt Bernard’s Hospital underwent a redevelopment to upgrade infrastructure. It required approximately 60 concealed, slimline closers for locations that needed to adhere to high hygiene standards. The closers also needed a means of back check or the ability to stop doors from bumping into objects behind them. The hospital installed the ITS.11204 because it:Comes with an adjustable angle cushion stop for easy fittingHas cam actionIs easy to openAdheres to high hygiene standardsIs suitable for fire doorsComes with a 10-year guarantee as per requirements‘They work as if they are not there! Very smooth and not obtrusive.’ – Staff Nurse

Armourcoat's 3D Sculptural wall has been specified for innovative healthcare practitioners One Stop Doctors clinic in Hemel Hempsted by luxury interiors specialists Goddard Littlefair.The client design brief was to create a high-end service environment that communicated the calm, soothing and welcoming feel of a patient-centric experience. Bespoke furniture,a Goddard Littlefair design signature element, is used throughout in a range of high-end materials, including velvet, leather and suede in a spectrum of browns, slates, taupes, blues, purples and greys. To complement this, a feature wall of Armourcoat's Sculptural 'Flow Wave' provides the backdrop to the clinic's stunning reception space. Lighting was an important part of the mix, creating features with natural and artificial light. Reflected and diffuse light create moments of drama and art throughout the interior.Armourcoat Sculptural creates seamless wall surfaces with impactful designs and cast relief. Each design is created from cast GRG (Glass-fibre reinforced gypsum) panels, CAD generated to enable a continuous pattern of unique decorative effect.The state-of-the-art centre is the first of eight planned clinics to be located around the M25 corridor area. "We are not looking for the usual clinical healthcare design", One Stop Doctors CEO Ella Tracey commented, "but wanted a designer who could share our vision for creating an ambience that was relaxed, reassuring and tranquil, very comfortable and also aesthetically beautiful. Staff, visitors and patients alike are so impressed with the elegance of the design and the attention to detail, but also appreciate the feeling of warmth and comfort that it creates" Photography © Gareth Gardner

THE PROJECTThe Waterside Park project features multiple banks of a fire rated mailboxes that comply with the BS 476 Part 22 offering a one hour integrity rating that will ‘contain and form a break to a fire’.The bank of mailboxes are recessed into a wall and integrated with a finishing surround frame providing a high quality edging to the products, hiding any gaps between brick and mailbox and ensuring a high quality finish.The mailboxes feature an inward sprung flap, which is a standard feature across the fire rated mailbox range. An intumescent strip is placed on the internal side of the mail flap, which expands when the temperature increases and ensures that the flap is kept closed – stopping the oxygen flow into the mailbox and reducing the risk of fire spreading through the mailbox.Each mailbox used in this project has been fitted with a unique identification numbering vinyl with a black colouring to easily show the users (both residents and postal operatives) where each mailbox is situated.

BackgroundLocated in the Ancoats area of Manchester, the Albion Works strip and re-fit project was funded by the Building Safety Fund, a Government Fund to remove unsafe non-ACM cladding on residential and mixed-use properties that are 18 metres and over and do not meet building safety regulations.K Systems Approved Installer QFF Façades were contracted to complete the exterior wall insulation and rendering of the 8-storey residential building.The original 60mm EPS system was stripped from the building and replaced with a safe, thermally efficient façade solution, which upgraded the fire performance of the cladding, ensuring the safety of both the building and residents.Our ServiceK Systems provided support throughout the application process for this Building Safety Fund project. The Technical team offered on-site technical and installation support throughout the build process and supported QFF to ensure quality and reliability.We produced a bespoke specification and worked closely with Thomason Consulting and QFF Façades to agree and deliver specifics such as fire stopping and abutment details.From design advice through to installation, we offered a partnership approach which aided a smooth installation process with minimal disruption.Technical Project DetailsThe original sheathing boards were replaced, and the K Systems Exicco M drained cavity façade system was installed. This high performing drained cavity system was specified as a requirement for this steel frame residential building. 60mm mineral wool insulation was specified to retain the line of the existing façade.Fire safety with high rise buildings like Albion Works is of utmost importance and this solution generates high levels of fire resistance and non-combustibility (A2, s1-d0 rating), meaning the latest building regulations were complied with. Additionally, the thermal performance of the building improved with a U-value of 0.28 W/m²K being achieved. Residents will therefore enjoy reduced heating costs and better living conditions.For the finish, silicone thin coat render ensured that aesthetically Albion Works had a clean, crisp attractive appearance. This durable, low maintenance render transformed the outside of the building and will ensure a longlasting finish to the property.

In our first in a series of case studies, we’ve invited FireDNA Alliance Partner, Steve Neilson to share his experiences using the FireDNA system to inspect and catalogue 9422 fire doors in three months, on behalf of Mitie, for the Scottish Fire and Rescue Service.The Scottish Fire & Rescue Service is the fourth largest in the world and ensures the safety and wellbeing of the people in Scotland. Operating out of 547 buildings across 357 sites, these centres are managed by the UK’s largest ‘Facilities Management’ provider Mitie.Following several months of discussion between Mitie and the Scottish Fire & Rescue Service regarding the status of the fire doors across their property portfolio, a tender was issued for an extensive fire door inspection and evaluation programme to be undertaken.Having secured the works through competitive tender, we further engaged with Mitie and the Scottish Fire & Rescue Service team. Working through their property asset registers in detail we gained a full understanding of the scope and requirements of the project.Following weeks of detailed project planning and final agreement on the timeline, it was evident that we had just over 3 months to inspect and report our findings on 9422 fire doors across the 357 site locations, and this all had to be done during the winter months of late 2021 and early 2022.In order to deliver on such a tight timescale, absolute dedication and collaboration was required from all parties…the project managers, admin staff and fire inspectors as well as the teams at Mitie and Scottish Fire & Rescue Service. To support this challenging task we armed our resources with a new cloud based system called ‘FireDNA’.We had been approached by FireDNA a couple of years earlier to see if we would be interested in helping to beta test their new ‘Fire Door Inspection and Monitoring Software’, to which we agreed, little did we know at the time that this software would prove invaluable to us further down the line!Deploying teams of up to 10 Fire Inspectors at a time, armed with the new and now completed FireDNA Inspection and Monitoring App, we set about working through the phased inspection schedule.Having been involved in the development testing of the FireDNA software, we had no doubt this system would, increase the speed in which the surveys were carried out, and dramatically reduce the time and effort in reporting the findings. Working closely with the FireDNA software support team, who assisted us in the initial software training, our Fire Inspectors were able to work efficiently and effectively ‘at pace’ through the challenge. The FireDNA App also has ‘LiveChat’ built in so any questions or queries by our operatives in the field were easily and quickly dealt with by the FireDNA team, which meant there was very little downtime during the inspection process.One of the great benefits of using the FireDNA App is that everything is ‘real-time’ so our office-based project managers could immediately see how the inspections were progressing. Once the inspection data and supporting photography was in the system report generation was largely automated and nicely formatted into MS Word and Excel documents.These reports could then be initially shared internally with our remedial work/replacement estimators for accurate cost estimates, who in turn could then produce accurate cost estimates and quotes for the works required as each buildings inspection was completed. This created a very fast, efficient and accessible workflow process for the whole team.FireDNA is not only a fantastic fire inspection and reporting tool, but also initiates the ‘golden thread’ of information, allowing building owners and managers like the Scottish Fire & Rescue Service and Mitie to take ownership of the ‘live data’ in the system, which can easily be updated and shared as each fire door asset is inspected, monitored and maintained year-on-year, which will soon become the minimum legal requirement.FireDNA also enables building owners and facility managers to create status reports for O&M compliance, which can be shared with insurers and the like, as well as appointing contractors and maintenance teams to carry out and catalogue remedial works and new installations, which are all date-stamped and locked into the system.In our view, anyone involved in fire inspections, installations, planned preventative maintenance and asset recording of passive fire products, such as fire doors, doorsets and fire screens should be using the FireDNA system. For duty holders such as building owners, facility managers, landlords and surveyors to make sure the assets they are responsible for are safe and compliant and the data unambiguous and accessible by all that need it, including residents.We believe FireDNA is the best system on the market and anyone who uses it will appreciate not only the time and money savings but importantly how this centralised system improves work standards across the full lifecycle of passive fire products. Steve Neilson – FireDNA Alliance Partner – Scotland

Compartmentation, Protected Means of Escape and Boundary Protection were all required as part of the fire safety solutions and therefore Coopers FireMaster fire curtains and Coopers FireMaster Plus2 fire curtains were installed to ensure the fire safety requirements were met. In total, 113 fire curtains were installed, 96 with round headboxes and 17 with square headboxes. Round headboxes were engineered for The British Museum as a request from the architects. The headboxes of the fire curtains were going to be seen by the occupants so Coopers engineered a round headbox that looked in keeping with the design of the building.

DRU gas fires and a Spartherm wood fire were specified by Ethos Construction and DRU dealer Grate Expectations for Harford Manor, a country house in Holyport, Windsor. They selected the fires for their ‘A’ energy ratings. This included the DRU PowerVent extended flue system for flexibility of location. In addition, the gas fires can be operated using the DRU Eco Wave app for tablets and smartphones. Ethos project manager Niten Mistry said: ‘The fires were selected for their impressive performance and ease of installation. They also contribute to the high quality of the property.’ www.harfordmanor.com, www.grateexpectations.com,

The existing ornate and decorative features of the hotel, meant that the fire curtains needed to integrate with the existing parts of the building that were remaining. This included a four sided, marble clad atrium in one of the main entrance halls, which covers two floors. There were four fire curtains installed around the first floor of the atrium therefore reinstating fire separation between floors. Fire curtains offering up to 3 hours fire resistance were also installed in the new hotel kitchens, preventing fire from spreading from kitchen areas to the public dining rooms and bar.

Horizons is one of the most recent additions to the skyline on the north bank of the Thames and offers 190 private apartments with stunning views from their substantial private terraces. Two luxury residential developments housed in connected blocks.One of the architectural challenges was to maximise the spectacular panorama and at the same time conserve the local heritage around. The considerable number of balconies involved throughout the development also demanded the minimisation of any possible structural or thermal bridging problems. The Schöck Isokorb® T structural thermal break comfortably met the specification and as the project involved precast balconies, specialists Marble Mosaic had a big part to play as well.The joint MD Dennis Vittle: “This particular project required the balcony units to be not only integral with the main structure, but also insulated and fire-stopped from it. The Schöck Isokorb® T type K was the natural solution. There was a requirement for 345 individual precast balconies throughout the two blocks and the project posed a number of new challenges to MMC’s and the Schöck design team. As well as standard insulated balcony to slab connections there were also a number of downstand and upstand connections required. Also the precast columns were supported off the balcony slab at one end only, so there was a heavy eccentric shear load transfer. The agreed design called for the use of a combination of Schöck Isokorb® T types K and Q to ensure structural integrity with the frame, whilst avoiding any clashes with the concrete frame reinforcement”.

The Coopers FireMaster®, closed rectangular Concertina fire curtain is a perfect solution when requiring fire compartmentation around a staircase as it offers a virtual firewall creating a lobby once the curtain has been deployed with more than 2 hours integrity. The innovative Concertina fire curtain installed at Aldgate Tower fully encapsulates the staircase from the 11th to the 12th floor in the event of a fire. The curtain is triggered by either the fire alarm system or a local heat or smoke sensor and is automatically deployed from the ceiling to the floor.

Coopers installed and commissioned two FireMaster® Plus fire curtains, the first to protect the property from fire and smoke migrating from the kitchen whilst the second to protect the internal balcony from smoke and fire travelling between floors. Both fire curtains provide 2 hours fire and insulation zone protection and were installed into the ceiling to remain hidden from view until deployed by a fire alarm.

How to incorporate a fire or stove installation into a self-build project.By Niall Deiraniya, UK general manager, DRU FiresAlways ask for the fireplace specification at the design stage. Modern gas fires and wood stoves require careful planning in order to work as part of the general home heating system.Gas, wood or other fuels?Decide which fuel type best suits your home. Modern gas fires have realistic flame pictures and are much more energy efficient than older models.Wood stoves and fires also have greatly improved energy efficiency due to Ecodesign regulations. The only downside is that there is much more work involved with buying and storing the wood and cleaning the stove after use.Both gas and wood have room sealed options. This means that no air from inside the home is used for combustion and all waste emissions are expelled outside, resulting in clean burning and high efficiency.Finally, sustainable fuels such as Bioethanol produce a very attractive flame picture, burn cleanly with no smell or emissions and are available in a large selection of design formats. Built-in or freestandingIf you are converting a house with an existing chimney, you may wish to retain the chimney, to incorporate a more modern fire. Conventional flue gas fires are designed to fit seamlessly into standard chimneys and require minimal building work. The chimney will almost certainly need sweeping before installation and the fire may require a chimney liner for essential safety.Most wood fires are also designed for chimney installation and make full use of the air circulation properties to provide visually attractive and energy efficient fires. You can either elect for a basic ‘insert’ fire, which matches the dimensions of a Class 1 chimney or a widescreen model, which will require some structural changes.Freestanding stoves are very popular, as they offer greater flexibility of location and provide dramatic room features. They are available in gas, wood or bioethanol and generally need a flue connection to an outside wall or through the roof. No chimney optionsContemporary balanced flue gas fires are designed to be installed without a chimney, so you can incorporate them almost anywhere in a self-build project. However, they still need to be specified at the earliest possible stage. A typical installation will require the fire to be flued through an outside wall, with the flue concealed behind a false chimneybreast. Fires can be located in room-dividing walls and other architectural features so they can be seen from both sides. You can also enjoy fires in kitchens, bedrooms, loft conversions and many other places. These types of installations are made possible by extended, fan-assisted balanced flue systems. They allow for multiple fires to be placed in larger properties, with the flues hidden in crawl spaces and other discreet areas, terminating on the roof.In conclusion, the secret to having attractive and energy efficient fires and stoves in any self-build project is design, plan, cost and implement. And always consult a fully qualified Gas Safe or HETAS engineer.For further information visit www.drufire.com

Fully compatible products from the range of TBA FIREFLY™ have been chosen to compartmentalise roof voids between apartments and communal lobbies of a large apartment building in the London Borough of Lewisham, providing 120 minutes fire integrity protection as part of a wide ranging refurbishment programme carried out earlier this year.The contract on Lewisham Homes’ Commodore Court in Albyn Road has been led by the sector specialist construction company, Mulalley & Co. with London/Sevenoaks based CLM Fireproofing carrying out the installation of the TITAN Lite™ 120:60 barrier system, in combination with Collaroll and the use of ancillary products from the FIREFLY™ range.CLM Fireproofing was founded 30 years ago by Clive Miles and has established a reputation as a leader in the fields of both passive fire protection and fire-stopping; working in a variety of sectors on projects right across the UK. A regular user of the FIREFLY™ range, many of its operatives have attended courses at the company’s premises in Rochdale to become trained FIREFLY™ installers.The Site Agent for CLM, Virginijus Pasvenskas, commented: “There was initially an intention to use a mineral wool flexible fire barrier, but the product was not tested for the scenario installed around the services such as a downpipe and it was upgraded to the use of the FIREFLY™ system by the client/project team. The installation of the TITAN Lite™ and the Collaroll to wrap the trusses and the services went very well and, as well as supplying specific details for the work, FIREFLY's technical team came to site to inspect the works. We completed our contract on schedule back in the summer.”TITAN Lite™ 120:60 has been developed for use in vertical separation or compartmentation situations, offering 120 minutes integrity and 60 minutes insulation and is able to be sealed around penetrations. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including tower blocks and other HMOs.The flexible woven material is easy to cut and fix, and is chemically treated to improve its cooling properties and therefore prevent temperatures rising in adjoining areas. The system has been fully tested to BS 476 Parts 20 & 22 and is third party certified by IFC. The six metre long rolls of TITAN Lite™ 120:60 have a minimum thickness of 6mm and are installed using special staples as well as high temperature adhesive.Employed as part of the FIREFLY™ System and also to wrap the services which penetrate barriers such as PHOENIX, ZEUS Lite™ and APOLLO Lite™, Collaroll comes in a roll which unwraps to 10m long x 300mm wide with a sewn in concertinaed skirt. The skirt can be moulded to shape to seal it neatly to the upright barrier, which is usually at 90 degrees to the Collaroll and fixed into place using the FIREFLY™ high temperature adhesive. The R31 Staple Gun and Staples are used to staple the Collaroll to itself tightly around the penetration.

Coopers innovative FireMaster Plus2 fire curtains was also used to create tenable zones as the product offers both integrity and radiance performance. The use of all the fire curtains allowed the open plan design of the museum to be realised by offering fire compartmentation and boundary protection. A total of 20 Simplex and Duplex FireMaster Horizontal fire curtains and 110 FireMaster and FireMaster Plus fire curtains have been installed in the museum by Coopers Fire UAE partners, Dosteen Doors.

Bioethanol fires require no chimney or flue, give off no harmful emissions and are 95% energy efficient. They are available in a large selection of designs for living rooms, kitchens, bedrooms, bathrooms and gardens. A good example is the home of Bury resident Anthony Norman, who chose an Italian kitchen and a British made bedroom from local dealer Icon, both featuring table-top bioethanol fires. Anthony and his family were convinced that they would make exciting additions to their new kitchen and master bedroom. Ebios bioethanol fires are made in Germany and distributed by DRU in the UK.

As the leading manufacturer of fire and smoke curtains, Coopers were appointed to develop a smoke curtain system to provide an unintrusive method capable of controlling smoke migrating from the lower floors. It was also necessary to protect the un-insulated glazing installed above the atrium’s reception area with an approved fire curtain barrier system approved to provide a one hour insulating zone. Coopers manufactured, installed and commissioned two SmokeStop smoke curtains developed to control smoke generated in the event of fire and effectively channel it away from occupants during evacuation.

The recently renovated 'schloss Colditz' in Saxony, Germany is a great example of how to reconcile the often conflicting demands of historic preservation and fire-protection. The renovation has not just fulfilled fire-protection requirements but the planners have used extremely discreet solutions that fit with historic preservation requirements. Many of the passageways have been fitted with Teckentrup T30 all-glass doors, which combine functionality with aesthetics and maximum transparency.

The Coopers FireMaster, closed and open Concertina fire curtain is a perfect solution when requiring fire compartmentation around a staircase as it offers a virtual firewall creating a lobby, once the curtain has been deployed, with more than 3 hours integrity. A total of five FireMaster Concertinas were installed between floors 11 and 15 in this large office space. These curtains allow for the open plan flow of the building to remain as intended and prevent the spread of fire through the building whilst providing compartmentation.