"decking"

Based at Manchester’s waterfront in Salford Quays, MediaCityUK Studio Block is the largest media development in the UK and will become centre for the world’s leading creative and digital businesses. The BBC is one of mediacity:uk’s anchor tenants and from 2011 it will be home to five BBC departments including two TV channels and two radio stations; three of them are Radio Five Live, BBC Sport and CBeebies.Many of the studios in the main Studio Block have Stravifloor Jackup jack-up concrete slabs to optimise the sound insulation between noise producing and noise sensitive spaces. These floating floors in combination with the structure of the studios being isolated off Stravibase SEB simple elastomer bearings delivering high performance box-in-box constructions.The TV studios built off the upper floors were built using a heavily damped concrete construction supported at 600mm centres using Stravifloor Deck isolation rails. In these studios the structure of the studios was built off the floating floors to create the box-in-box whilst providing very stable conditions for the TV cameras.

Non-Conductive, Anti-Slip Flooring and Walkways | Case StudyArena Events Group chose Dura Composites to supply the tiered structure stadium decking for the seating and platform areas, manufactured from our high quality and corrosion-resistant Glass Reinforced Polymer (GRP) Dura Slab 40 and 20 products which provided an anti-slip, fire-tested and load-tested alternative to the Buffalo® Board and traditional plywood used previously. Dura Composites’ ability to be able to meet a range of stringent test requirements including flare resistance tests and FEA analysis made us the ideal choice for this high profile project which not only allows for future changes to seating configurations, but also improves access to amenities on the concourse. The two types of Dura Slab used on this project are precision engineered GRP structural flooring systems that provide an incredible strength to weight ratio. High strength fibreglass composite is pultruded in one mass to produce a consistent quality flooring structure that is also non-corrosive, chemically resistant – and has an anti-slip walking surface.

Garratt Lane in Tooting is located in the South East of London, close to the Northern Line on the London Underground, making it a residential building perfect for commuters.Works started on Garratt Lane towards the end of June 2014, where we supplied approximately 2,350 m2 of Soundis cradle & batten acoustic flooring to provide a deep service void and a level floor on the un-even concrete structural deck. Our Cradle and Risers are manufactured from 100% recycled materials assisting to the sustainability targets of projects. The extremely un-even sub-floor throughout the premises combined with project specific requirements of a deep service void for Under Floor Heating soon meant the Soundis Cradle System was the only solution in maintaining a 125mm finish floor height throughout the project.The quality of installation by our installation partner UK Acoustic Systems was made clear upon the release of the acoustic flooring testing results as noted below. The average reduction and improvement of Impact noise was 22dB, with Airborne performance averaging 56dB, which is significantly higher than ADE and RD regulations.

A £5m renovation scheme in Warrington has been presented with the “Best Change of Use to Existing Building” regional award by LABC (Local Authority Building Control) and Warrington Borough Council.The scheme required the conversion of a former office building, Kings Court, in Central Warrington, into 32 luxury flats, comprising of a mix of one and two bedroom apartments, arranged over three floors of accommodation. These flats are situated above retail units and restaurants. The renovation included a further two exclusive duplex penthouses for Phase 2.As part of the renovation, Main Contractor Emerald Bay Construction required an acoustic flooring solution to meet Approved Document ‘E’ Building Regulations and therefore provide overall resident comfort, in terms of Sound Insulation between separating floors. As the building structural floor was primarily concrete, Soundis put forward a solution that involved 2,072 m2 of Soundis ChipPanel 28 to help with Impact Noise. This shallow deck floating floor is ideal for concrete floors where Airborne Noise is not an issue but Impact Noise Attenuation needs to exceed the requirements of current Building Regulations.

Our purposeOn behalf of Amye Defence Services, Acclaim Contracts Ltd was commissioned to address the aging roof of the building, which was leaking despite receiving patch repairs over the past 20 years. The Ministry of Defence’s Project Allenby/Connaught demonstrates the Government’s commitment to maintaining defence estates.The £1.45bn scheme is a 35-year commitment to providing modern, high quality, fully serviced, purpose built living and working accommodation for 18,700 soldiers. It involves the new build and refurbishment of more than 550 buildings across Salisbury Plain and Aldershot, including upgrading Allenby’s Building 51, otherwise known as the Sports Pavilion.Our solutionAcclaim turned to Langley to provide all the material necessary to complete the work. After stripping the original roof to the existing plywood deck, the team fitted new treated timber around the perimeter and new uPVC fascia. The current edge trims, perimeter check kerbs, and extended flues were removed to ensure regulatory 150mm clearance was achieved once the new roof covering was installed. Langley’s HT180 attachment layer was loose-laid and nailed into place to provide appropriate protection to the timber deck while the “hot works” above were undertaken. Langley’s TA-20 Flat Roofing System was installed across the roof area, with insulation to achieve the regulatory requirement of 0.18W/m2K. SA-20 Flat Roofing Detailing System was used in fire risk areas, in line with Safe2Torch guidance. The range of Langley’s TA systems complies with Broof(t4) classification and has a Local Authority Building Control (LABC) assured accreditation. Under MOAT 31, Langley’s Parafor 30 GS (cap sheet to the TA system) achieves a ‘resistance to damage” rating of R4. It is independently certified by the BBA to deliver a life expectancy of at least 40 years, one of the longest available in the UK.Acclaim fitted Langley’s ParaFurb Refurbishment Outlets to upgrade the internal outlets where possible, cleaning and priming those where the design precluded the use of ParaFurb. We installed New Code 5 lead pipe sleeves to flues and hot pipes to a minimum 150mm above the waterproofing. In addition, Langley’s ParaTrim GRP Edge Trim was fitted to all the kerbs.“It carried great weight with us that Acclaim worked in partnership with Langley, who offers an independent insurance-backed guarantee. That is indicative of pride and confidence in its work, giving synergy with Amey. It also gives us, and our client the Ministry of Defence, that the refurbished estate at Allenby will serve and be fit for purpose for decades to come.”Will Loates, Service Delivery Area Manager, Amey

11 Freebournes RoadBauder reinforced bituminous waterproofing system with BauderSOLAR FSynopsisA large derelict warehouse located in Witham has undergone major renovation to transform it into a storage centre for Essex County Council that will assist its services and benefit the local community. The refurbishment works were designed and project managed by Lambert Smith Hampton on behalf of the client, who wanted the building to act as a benchmark for sustainability with the roof playing an integral part in achieving this through the addition of solar panels.Bauder Building BoardProject Name:11 Freebournes RoadLocation:Witham, EssexRoof Size:5,200m²Client:Essex County CouncilProject Manager:Lambert Smith HamptonApproved Contractor:Acclaim ContractsPV Installer:CJ SolarEnvironmental focus:Solar PVThe specificationWorking closely with the client, Bauder performed a comprehensive roof evaluation survey to identify the full extent of water ingress being experienced and to confirm the suitability of adding solar. The bespoke survey report highlighted that the roof needed to be stripped back to its original deck, before being waterproofed with over 5,200m2 of Bauder’s reinforced bitumen system by Acclaim Contracts. 588 solar PV modules were then fitted onto the roof by electrical installer CJ Solar, enabling the client to generate at least 134.70 Megawatt Hours of solar power each year. Products appliedBauderSOLAR FIntegrated photovoltaic system, where the modules and the substructure are combined to form a single unit, which is secured to the roof without any penetration of the waterproofing or roof deck. System installedReinforced Bitumen Membrane System1 Reinforced bitumen membraneTorch applied, elastomeric bitumen capping sheet2 BauderPIR M 60Rigid urethane foam insulation faced on both sides with aluminium foil.3 BauderPIR FA-TETorch applied air and vapour control layerAdvocacyJulian Sanchez, Commissioning Delivery Manager for Essex County Council: “We actively look for opportunities to implement renewable energy and knew that this storage facility lent itself well to PV retrofit. Our system selection process involved the due diligence you would expect from a local authority and we decided to go with Bauder because of its comprehensive system portfolio that meant we could have a single source supply and all-inclusive guarantee; giving us complete confidence in the roof’s performance.”

University Coventry Hospital is situated in the Walsgrave on Sowe area of Coventry and is part of the University Hospitals Coventry and Warwickshire NHS Trust. The hospital opened in 2006, replacing Walsgrave Hospital the original hospital at the site.Twinfix was approached by Principal Contractors William Gough to design, manufacture and install a walkway from the helipad on the first-floor deck to the hospital’s Accident and Emergency department. The requirement was for a robust walkway that was structurally sufficient to withstand the usual weather forces and the down draught from a helicopter in close proximity.Liaising closely with William Gough and designer Pinnegar Hayward Design, the expert team at Twinfix designed, manufactured and installed a 240 sqm free-standing mono-pitch canopy with vertical perforated side panels. This impressive canopy design included lockable double leaf gates to secure the area.The roof comprises of our Multi-Link-Panel Non-Fragile (NF) system powder coated to RAL 5010 – gentian blue and glazed with 16mm multiwall polycarbonate, and the vertical panels were powder-coated to RAL 7037 – dusty grey. As this metal does not rust in use, the walkway will keep its good looks throughout its long life.

Kielder Observatory Surespan designed and manufactured two sets of bespoke double leaf hatch doors for the Kielder Observatory located in England’s largest forest in Northumberland.  The ProjectAs part of the Kielder Art and Architecture program, Charles Barclay Architects designed Kielder Observatory for the Forestry Commission. The all-timber observatory was constructed from Douglas fir with larch cladding, the pier-like building has rotating turrets that house two permanent telescopes and an observation deck. The turrets can be rotated through 360 degrees.The observatory generates its energy using a wind turbine and photovoltaic panels and includes a composting toilet. The observatory has received 2009 awards from the RIBA and The Civic Trust and featured in the inaugural World Architecture Festival.  The ProductSurespan design and manufactured two sets of bespoke double leaf hatch doors for the roof and the front of the Observatory’s two rotating turrets – one to house a 20” Pulsar manual telescope and the other for a small Mead 14” telescope.  FeaturesThese hatches are electrically operated and have been specially designed to open in a specific sequence using remote control via 24v dc actuators.      

IntroductionSurespan design and manufactured two sets of bespoke double leaf hatch doors for the Kielder Observatory located in England’s largest forest in Northumberland. Products suppliedWe supplied;Surespan designed and manufactured two sets of bespoke double leaf hatch doors for the roof and the front of the Observatory’s two rotating turrets – one to house a 20” Pulsar manual telescope and the other for a small Mead 14” telescope. Features:These hatches are electrically operated and have been specially designed to open in a specific sequence using remote control via 24v dc actuators.The projectAs part of the Kielder Art and Architecture program, Charles Barclay Architects designed Kielder Observatory for the Forestry Commission.The all-timber observatory was constructed from Douglas fir with larch cladding, the pier-like building has rotating turrets that house two permanent telescopes and an observation deck. The turrets can be rotated through 360 degrees.The observatory generates its energy using a wind turbine and photovoltaic panels and includes a composting toilet.The observatory has received 2009 awards from the RIBA and The Civic Trust and featured in the inaugural World Architecture Festival.

Bespoke circular walk on rooflight on a terrace overlooking the harbour The ChallengeRefurbishment of the roof area, creation of a terrace with a pool and seating area that complemented the existing building.The SolutionThe Boom Tower which boasts outstanding panoramic views over Portsmouth Harbour, was a project Westcott Construction Portsmouth carried out with work that involved the refurbishment of the roof area they created of a terrace with a seating area and pool on the roof, overlooking the Solent. Works included frameless glass balustrades around the extended deck and a bespoke walk-on circular roof light with opaque safety was created and provided by us to make a unique feature for the roof. These finishing touches mean residents now have the perfect place to relax and enjoy 360 views from the roof terrace of Portsmouth Harbour, the Solent and toward the Isle of Wight.Whether you’re at planning or construction stage why not see how we could help you add natural light and space to your residential space; you can call us on 01223 792244 or pop us an email via info@nextgenrooflights.co.uk outlining what help you need.

Cambridge University, Department of Civil EngineeringBauderBLUE STORMcell with BauderSOLAR G LightSynopsisThis new build project in the centre of Cambridge combines a Sustainable urban Drainage Solution (SuDS) with vegetation and renewable energy in a warm roof construction.The client for the Department of Civil Engineering at Cambridge University, R H Partnership, identified sustainability as being a key driver in the design of the roof, but also sought a single source supplier that could provide a guarantee for both workmanship and products. Bauder’s systems range encompasses products to meet all the sustainability objectives, and with our network of approved contractors carrying out the installation, we could offer the comprehensive guarantee that was required.Bauder Building BoardProject:Cambridge University Department of Engineering​Location:CambridgeRoof Area:1610m²Client:University of CambridgeSpecifier:RH Partnership ArchitectsMain Contractor:SDC LimitedApproved Contractor:Voland LimitedThe specificationTo meet the sustainability criteria set out by the client, the Bauder technical team designed a roof system combining an extensive blue roof, a green roof and a solar PV array. The first and most fundamental element of the roof system though is the waterproofing. Bauder Total Green Roof System (BTGRS) was selected as it provides robust and durable waterproofing with a life span in excess of 35 years, as validated by BBA Certificate 10/4744. The Plant E cap sheet has also been tested by the FLL to ensure long term root-resistance, making it ideal for use in conjunction with the BauderSOLAR G LIGHT system. The BauderSOLAR G LIGHT system is a unique way to combine rooftop vegetation with renewable solar energy. The PV panel mounting boards are held in position using the growing medium as ballast, meaning the waterproofing is not penetrated and therefore compromised. The mounting boards incorporate a water retention feature which allows a small amount of excess rainwater to be stored for short periods of time for the various plant species to feed from. The BauderSOLAR G LIGHT system’s unique mounting system lifts the panels above the vegetation allowing the plant life to grow freely and therefore qualify a greater area of the roof as biodiverse.In addition to the BauderSOLAR G LIGHT system, a blue roof was added to the build-up. Blue roofs are sustainable drainage solutions designed to manage stormwater on a flat roof to reduce water runoff rates and ease flash flooding and standing water in built up areas. The BauderBLUE Roof System attenuates water from a flat roof over a 24-hour period via a restrictive flow outlet. Calculations are carried out to determine the rate at which the water should egress the rooftop. This is determined by the local planning authority and is often set as low as 5-8 litres per second per hectare. With these calculations, Bauder can design each flow restrictorto meet the necessary runoff rate. For the Department of Civil Engineering, the main roof area of 1455.5m² required two flow restrictors, each with flow control holes to ensure the specified discharge rate of 0.77 litres per second was achieved. The maximum depth of water the roof is designed for is the H-max. When the water level reaches H-max, it will drain via the emergency overflow pipe. These overflow pipes are set at the same height as the H-max level. On this project the H-max was calculated to be 99mm. Although an unlikely scenario, this provision for a ‘once-in-a-hundred-years’ storm event will ensure that the structural integrity of the building is always preserved.Project challengesThe roof deck was constructed using a pretensioned concrete plank roof structure. Due to the large span of these planks, the dead load weight to the roof would be restricted. This being a blue roof with green landscaping and PV (a reasonably heavy build up), presented the issue of balancing the need of the roof design and the weight restriction of the supporting structure. To add to this challenging scenario, the pretensioned deck did not provide a completely flat finish. When installing a blue roof, a flat deck with no positive or negative falls is essential, as detailed in the 2018 update of BS 6229 – Flat roofs with continuously supported flexible waterproof coverings. To overcome this onsite challenge,the final deflection of the fully loaded roof was calculated and the concrete deck was screeded to give a flat finish.The resultBauder believes this project to be one of the first of its type in the UK to bring together so many rooftop systems in one space. Project management and clear communication was paramount in order to ensure a smooth installation. The Bauder project team consisted of green roof and solar PV product managers, area technical manager, technical design team, site technicians and approved installers for the waterproofing.With all the different elements being installed, green roof and solar PV product managers worked with our technical team to design the best possible PV array configuration for optimum energy generation whilst also qualifying for the maximum biodiverse area.Bauder site technicians worked closely with Bauder approved contractors, Voland Asphalte Ltd, to ensure works were kept to schedule and that a high quality of workmanship was maintained throughout.To ensure the landscaping is maintained, irrigation was installed by Access Irrigation Ltd. The system, Permadrip Pro, is a drip line irrigation system with anti-syphon design to resist clogging and pressure regulation. Due to the specialist nature of the irrigation system, Access Irrigation Ltd provided a bespoke design service.The result of this network of expertise was a multi-faceted support service for the client, specifier, main contractor and roofing and PV installers. System installedBauder Total Green Roof System (BTGRS)1 BauderPLANT E 42Green, 5mm torch-on root-resistant capping sheet.2 BauderTEC KSA DUOA self-adhesive, elastomeric, bitumen underlayer. This underlayer was used to ensure thorough sealing of lap joints in low temperatures when the roof was installed.3 BauderPIR FA-TETissue-faced flatboard insulation faced on both sides with aluminium foil to provide efficient thermal output.4 Bauder Super AL-ETorch-on air & vapour control layer. Once installed on the concrete pretensioned plank deck, it can act as a temporary waterproofing layer, allowing internal works to be carried out immediately which was a huge advantage on this new build project.BauderSOLAR G LIGHTThis BauderSOLAR G LIGHT system was a key factor in the specification of the project to meet the sustainability criteria specified by the client. 40 PV units were installed on the main roof area on the Departmentof Engineering. The forecasted energy generated for this arrayin its first year is 9.91MWh with a CO2 saving of 5.242 tonnes/a. BauderBLUE SR-B flow restrictorThe BauderBLUE SR-B flow restrictor is designed to be used in conjunction with a standard Bauder bitumen blue roof vertical outlet DN70. The flow restrictor is comprised of four parts; baseplate, overflow pipe, baseplate inner and baseplate outer seal. The polyamide baseplate fits within the 70mm vertical outlet, with the EPDM outer seal creating a watertight fit. The HDPE Overflow slots into the central hole of the baseplate with an inner EPDM seal preventing any leaks. The baseplate has a number (1-12) of 10mm restrictive flow holes bespoke to the project. The flow restrictor has no moving parts, hugely reducing the need for maintenance or risk of failure.

The purpose: Water penetration into classrooms alerted theOfsted “outstanding” rated Colchester County HighSchool for Girls in Essex to a problem with its roofs.Its premises advisors, Archer Building Consultancy,turned to Langley to offer technical support for themost efficient best-value rectification, with fundingprovided by the school’s governing body, The AlphaTrust.Our solution: We carried out an in-depth roof condition report which highlightedthat the four flat asphalt and 10° pitched copper standing seamroofs urgently need repair.We advised the most efficient solution and use of resources wasto strip the copper roof back to the plywood deck and form a newwaterproof layer from our TA-30 Flat Roofing System and theasphalt roofs overlaid with TA-30 and our Liquid Roofing System.By leaving the original roof, we were able to minimise disruption.In the process, we assessed the roofs for their suitability forphotovoltaic (PV) installation, then helped address energy costs:one over a three-storey building was deemed appropriate. Finally,in partnership with Archers, we supported the detail required toapply for Salix funding to cover the supply and installation of thePV array.

FOAMGLAS® Tapered T4+ (Slab)Design Architects: Amanda Levete ArchitectsStructural Engineer: ArupMain Contractor: WatesRoofing Contractor: Knight AsphaltApplication: Podium Roof - FOAMGLAS® Tapered T4+ (Slab )Finish: Porcelain TilesThe Victoria and Albert Museum is one of the world’s greatest museums of art and design. It provides unparalleled knowledge and understanding of the designed world to the public.The newly refurbished entrance is the first porcelain tiled public courtyard in the UK. It consists of a total area of 1200 m2 distributed in different levels.For this application, FOAMGLAS® Tapered T4+ (Slab) was specified and installed on a concrete deck with two high performance bitumen waterproofing membranes.The bedding and porcelain tiles provide the final finish and they will support the large volumes of visitors expected every day.The podium roof at Exhibition Road Quarter will showcase the best of contemporary design, as well as celebrating the beauty of the V&A’s existing building.At the heart of the Architects brief the newly created space is to accommodate the V&A’s headline exhibitions, it will also act as a public area.The Foamglas strength and time tested thermal performance will offer a long term solution to this very important entrance and courtyard.

As part of cultural regeneration of the Olympia Exhibition Venue, Olympia Central Hall has been demolished and the iconic structures of Olympia National and Olympia Grand, both Grade II listed buildings, are being incorporated into the site’s overall redevelopment. The West Hall Exhibition Space is being structurally strengthened to allow for a two-story music venue to be constructed above the existing exhibition hall.It is necessary to isolate the Central building, originally known as Empire Hall, from the West Hall performance space to prevent music and entertainment noise disturbance.Three massive bearing assemblies comprising solid thick steel plates holding Stravibase VHS bearings, which were pre-compressed using our patented frozen bearing technology.A small mock-up (approx. 1/3 of the size) was also constructed, and fire tested at Liege University, comfortably achieving a two-hour fire rating.Music and entertainment noise breakout from this new venue causing disturbance to residents.A custom designed Stravifloor Deck solution with rubber bearings isolating the concrete roof flab from the structure below. This complex floating roof is laid to multiple falls by using supporting rails that are tapered to suit.

Hotel Café Royal has just undergone a complete refurbishment and internal re-build. Part of the new complex is a state-of-the-art Spa and Gym which is located in the basement. Directly next to the hotel is Regent Street, below which runs the Bakerloo underground train line.Structure-borne noise levels from the trains were far too high to create the relaxing environment required for a top class Spa. The acoustic consultants therefore specified that all of the noise sensitive spaces must be isolated on a Stravifloor Deck concrete floating floor system.Café Royal’s 1,200 sqm Wellbeing Centre provides a personal and intimate holistic experience. It has a large lap pool and four different areas, corresponding to the four natural elements: spa/water, gym/fire, yoga/air and organic bar/earth.The spa offers a variety of Watsu hydro-experiences, a private and communal Hammam and signature Akasha treatments. Moods are enhanced by restorative music, aromas and gentle lighting. The gym has the most advanced fitness equipment, including Kinesis machines. There is a spacious aerobics studio and a private training room. Yoga, Tai-Chi and Pilates are offered in the calming area, with bespoke classes.

Lambertsson is one of Scandinavia’s largest rental companies and service providers in construction and industrial solutions. Lambertsson erects cranes and elevators for construction projects, among other activities. Shorter building times, better control over costs and smoother processes are therefore critical and beneficial to the project owners.ChallengeLambertsson has been erecting and dismantling elevators for more than a decade using wooden planks or plywood for building the elevator ramps. This method of building ramps is time consuming and resource demanding. Lambertsson needed a simple ramp solution that would make the project planning time more predictable and less time consuming when erecting the elevators. Lambertsson needed a ramp that could handle the same weight as the elevator, equivalent to a capacity of 2.1 tonnes, and without exceeding 1.3 metres from the position .SolutionIn order to meet the criteria of Lambertsson, PcP Scaffolding developed a custom solution based on the PcP OPTIMO® grating series, which is the safest choice for applications in construction, where workers are on the job. To customise a simple solution, PcP built a ramp that is able to lift the same capacity as the elevators, up to 2.1 tonnes, with a span of 80 cm. The ramp is made of aluminium decks and is very light to install.

Lincoln bowl has recently undergone a major washroom refurbishment to give their bowling alley a much-needed makeover. The renovation consisted of a whole washroom revamp from flooring to washbasins, taps, urinals and even the less-abled washroom facilities. The main aim of the project was to make their washrooms stand out as much as the bowling alley itself. Franke Water Systems provided over 20 washroom products for the revamp, including a range of Dart Valley branded taps, WCs, flush valves, hand dryers and a range of Miranit composite wash troughs for the male and female toilets.The full range of products provided were:2 x WC03-002 - WC flush valve kits 1 x WC03-002 - WC flush valve kit 2 x WC02-011 - Concealed plastic cistern kits 1 x WC02-011 - Concealed Plastic Cistern Kit 3 x UC07-010 - Urinal control systems 3 x UC00-001 - Backflow Preventers 3 x AT03-011 - Aquarius deck mounted A45 taps 1 x AT00-004 - Three station mains Kit 1 x ANMW411 - Single Quadro Miranit wash basin 1 x ANMW421 - Double Quadro Miranit wash basin 1 x DRYX500N - Hands in hand dryer 1 x F1390 - Airblast Hand Dryer

In 2015, Quinn London Ltd started the refurbishment of The Market Building, in Brentford which involved the conversion of Offices to residential dwellings as a ‘Material Change of Use’ project. Soundis provided acoustic solution options for this project, in order to ensure a cost effective Value Engineering Exercise, on behalf of the Main Contractor.As the 1st floor required a deep void system due to new soil pipes and waste pipes having to be installed along the corridor within the building for kitchens and bathrooms, it was agreed to utilise Soundis Cradle & Batten System. This provided a service void for the pipes of 300mm whilst the other areas of the floor were treated with the system at 80mm FFH. The Soundis cradle & batten acoustic floor was then overlaid with a Soundis a high quality, interlocking dry screed system gypsum fibreboard.The Soundis cradle & batten floor system has been installed on the existing concrete and existing timber structural floors to provide a level floor over the un-even sub-deck. The service void provided by Soundis cradle & batten system can be used for other flooring applications, such as underfloor heating.Our Cradle and Risers are manufactured from 100% recycled materials assisting to the sustainability targets of projects.

Emmett Russell Architects has designed social housing on several infill sites on the Northern fringes of Bristol to Passivhaus standard, achieving thermal comfort solely by post-heating or post-cooling of the fresh air mass. The projects address the demand for smaller housing units.The key architectural challenge was to make efficient use of tight site limitations without overlooking neighbouring properties. The metal screened balconies allow light into the first floor flats whilst minimising views into adjacent gardens. The balcony screens step down at the sides to open up and allow longer oblique views.DeltaWing-70 was chosen to fulfil this requirement. The louvred panels were inverted to provide a privacy screen which combined the maximum screening effect in a downwards direction with minimum restriction of natural daylight.Lang+Fulton also supplied panels of PL-66×11/30×2 to form a heel-proof decking for the balconies.In addition, DeltaWing-100 was used to create secure, visually obscured storage for two bikes at each property which was integrated within the entrance canopies. Some of the properties had 2000mm wide stores with double doors, others were 900mm wide with single swing doors for vertically hung bikes.

The overall aesthetic appearance of this project was very important. Originally, traditional metal roofing was considered, but the client had reservations with possible noise issues and theft problems, and local planning constraints did not permit the use of traditional slate. So, Williams Roofing Contractors of Chandlers Ford were tasked in finding an alternative solution.Polyroof’s BBA approved 185 GRP System can replicate the look of metal sheeted roofing at a fraction of the weight and the price and, having no scrap value, is not prone to vandalism or theft.The contractor worked closely with the Polyroof Technical Department, the client, and the planners to produce a detailed specification for the project incorporating pre-formed trims to create a lead effect. The system was successfully installed within the project time frame and upon completion was given the usual insurance-backed 20 year guarantee from Polyroof Products Limited.Polyroof’s simulated metal finishes are achieved through the installation of Polyroof pre-formed GRP trims which are fixed to the deck or substrate prior to the application of the Polyroof waterproofing membrane. The project was nominated for the LRWA Roofing Awards due to the high level of intricate detailing that was undertaken and the care that was taken to ensure that all preformed profiles were fitted in balanced, parallel positions. The overall attention to detail by the Polyroof approved skilled operatives was first class.

St Peters Street landscapingStreet furniture | landscape seatingUnity RangeLocation: IpswichSt Peters street in Ipswich has recently been landscaped as part of the latest phase of the ‘Greener Ipswich Project.’ This renovation has aided the kickstart of green spaces across the town as well as helping to create a lively atmosphere for the public.A range of concrete seating and planters were installed here beside the bronze statue of Cardinal Thomas Wolsey, which is situated in Ipswich town centre, Suffolk. The Townscape Unity range is designed to enhance and transform any urban space while maintaining functionality. The seating and planters are robust yet easy to move if or when necessary. The products used here were the Unity 1250 seat with deck top and the Unity 1250 planter in a Yorkstone buff finish.The landscaping upgrade was prepared as part of the Towns preparation for The Coronation of King Charles III and Queen Camilla. The main theme is based on the idea of Tudor plants, particularly those with medicinal properties. Tudor gardens were designed to provide food, medicine, and a place to relax and enjoy the outdoors. The herbs that have been planted near the Wolsey statue are some of the medieval healing herbs thought to have beneficial properties for the lungs, heart, digestion, and headache.

The Tottenham Experience is the largest club shop in Europe, and the facility houses both the Tottenham Hotspurs & their NFL Partners a unique shopping experience. The Tottenham Experience houses an entertainment suite on the top floor which replicates the stadium terracing. The complexity of detailing around the balustrading and steps was overcome by using the internal and external Proteus Technical Team.Proteus Hot Melt® and Proteus Pro-Therm XPS Plus offered the perfect solution.High Performance WaterproofingWith the podium deck covering 1500m2, the Proteus Hot Melt® system combined with Proteus Pro Therm Insulation XPS Plus was the optimum waterproofing solution for this project with a cost effective, seamless and fast application.This High performance solution worked exceptionally well for our Proteus Approved Contractor, who was able to install the system without any complications to the highest standard.Quality controlProteus Waterproofing worked in close partnership with both the Architect, Main Contractor and Proteus Approved Contractor, to successfully deliver the project to a very high standard within the required time frame and to the standard required.Long term performanceProteus Hot Melt® is a long lasting robust membrane design to last. The client required both a BBA Certified product that offered a 25 year Guarantee for the waterproofing system on this project.

Franke Water Systems was chosen as the key manufacturer for the revamp of Lincoln bowl’s washrooms. Inspired Washrooms, a Nottingham based company were chosen to carry out the project and specified  Franke Water Systems product range to complete the refurbishment. The renovation consisted of a whole washroom revamp from flooring to washbasins, taps, urinals and even the less-abled washroom facilities. The main aim of the project was to make their washrooms stand out as much as the bowling alley itself. Franke Water Systems provided over 20 washroom products for the revamp, including a range of Dart Valley branded taps, WCs, flush valves, hand dryers and a range of Miranit composite wash troughs for the male and female toilets. The full range of products provided were: ·        2 x WC03-002 - WC flush valve kits ·        1 x WC03-002 - WC flush valve kit ·        2 x WC02-011 - Concealed plastic cistern kits ·        1 x WC02-011 - Concealed Plastic Cistern Kit ·        3 x UC07-010 - Urinal control systems ·        3 x UC00-001 - Backflow Preventers ·        3 x AT03-011 - Aquarius deck mounted A45 taps ·        1 x AT00-004 - Three station mains Kit ·        1 x ANMW411 - Single Quadro Miranit wash basin ·        1 x ANMW421 - Double Quadro Miranit wash basin ·        1 x DRYX500N - Hands in hand dryer ·        1 x F1390 - Airblast Hand Dryer

The flat roof area at above the vast Guernsey Power Station had been suffering from water ingress as a result of failings in the existing EPDM membrane. Due to the expensive machinery housed within and the potential for widespread and costly disruption should the leaking continue.Guernsey Electricity turned to Sarnian Roofing Limited, a Polyroof approved contractor, to provide a rapid and effective waterproofing solution. The Protec System was specified, and work began quickly.The SolutionRemoval of the failed roof coverings to expose the concrete deck below began, and the BBA-approved Protec 20-year system was installed directly to the concrete. Due to its RapidCure technology, the system cures within 30-60 minutes, meaning less disruption for the client.The Protec System provides an flexible and seamless membrane that eliminates the risk of water ingress around penetration points common in industrial unit roofs. As the system is cold applied, there are none of the safety risks associated with the open flames and hot torches used with traditional roll-applied systems.Polyroof’s reputation has been built on the high level of technical support provided to clients before, during and after every contract.We like to work closely with our clients from the very beginning of a flat roofing project right through to completion and throughout the lifespan of the roof. From our experience, this is the best way to guarantee that all aspects of the roof are finished to the superior standards that our clients expect.

Addenbrookes Hospital Surge Centre2000m² Of CemfloorA temporary surge facility on the site of Addenbrookes Hospital to relieve pressure on the main hospital as part ofthe NHS' regional surge planFloor Screeding Solutions installed 2,000m2 of Cemfloor, the chosen screed for the project, which was supplied by Mick George Concrete, Cambridge.With the rising case numbers of Corona virus during the pandemic, hospitals were coming under increasing pressure for more critical care beds, and Surge Plans were put in place across the country to help alleviate this pressure.Addenbrooke Hospital in Cambridge sought to construct a ‘Surge Centre’ to cope with the additional demands on the hospital, and Cemfloor was chosen for the project due to its faster installation time and drying time compared to traditional sand and cement screeds. This helped to keep the project on track with its tight building schedule.Lewis Deck construction offered a strong light weight flooring option for the large pour area. As Cemfloor is a flowing screed, 500m2 of screed per day was poured over this by Dave Washbrook and his team from Floor Screeding Solutions, eliminating the need for on-site mixing.The main advantage Cemfloor has over other flowing screeds is the quicker drying times, and that it can accept foot traffic after 24 / 48 hours, meaning that construction could continue quickly and efficiently to meet the project deadline.

When developing new buildings, it is always important to consider the environmental impact. Responsible sourcing of materials is high on every priority list, along with reducing waste to landfill. But what about the local impact, such as the effects on local wildlife? A living roof/green roof system, such as the one installed by the Premier Contractor at Seaford Head Golf Club, is a very clear example of the steps that can be taken towards reducing this impact and providing an alternative space for wildlife to inhabit. A warm roof system was installed onto a structural plywood deck, after which a vapour barrier and insulation boards were mechanically fastened to provide both thermal efficiency and air leakage control. After the underlying installation had been suitably restrained in accordance with a site-specific wind uplift calculation, the roof membrane was mechanically fastened to complete the waterproofing system. Our PVC roof membranes have been tested and can be utilised without the need for additional root prevention barriers (test standard EN 13948), and because PVC is extremely lightweight, they are the perfect choice for these applications, reducing pressure on the underlying structure. In conjunction with our Living Roof/Green Roof specialists, a site-specific living roof system was supplied and installed over the completed waterproofing.Waterproofing System:DANOSA Single Ply 1.5mm - AnthraciteConstruction Type:New BuildWarm RoofSector:LeisureApprox. Size:900m2Warranty Period:20 Years

The International Convention Centre (ICC) Wales is an extraordinary venue designed for world class conventions, events and meetings.The result of a joint venture between the Welsh Government and the Celtic Manor Resort, renowned construction company, John Sisk & Son, was the main contractor on this 3500m2 project which also included a permeable and sustainable urban drainage systems (SuDS).AG’s premium granite block paving TerraPave® was the obvious paving choice for the convention centre as it offers a beautiful finish to complement a contemporary design. Additionally, it is a cost-effective, practical alternative to traditional stone paving. TerraKerb® also played its part in this high-profile hard landscaping project, adding a premium appearance to the ICC surrounding. With its widely recognised durability and weather resistance, it is now well established as a market-leading option.Tim Cave, Regional Sales Manager at AG, said:“A key challenge faced by AG was to create a high-quality permeable paving system for a large roof deck, capable of withstanding continuous heavy traffic. Our Xflo® Plaza was the perfect choice. AG’s Plaza block paviour is made using the most modern manufacturing techniques, ensuring it will stand the test of time and retain its high-quality aesthetics, whilst effectively managing the movement of water through the SuDS system. This is a pioneering but proven way of mimicking the natural movement of storm water and replacing conventional storm water drainage systems.”

Vehicle/Pedestrian safety barriers for the new 627 space, 6 storey car park at the Derriford Hospital in Plymouth.Like many hospitals, Derriford in Plymouth has to match ever-increasing numbers of patients, visitors and staff with limited parking availability. The new 627 space multi-storey car park on the North West Quadrant will go a long way towards easing the situation for the daily 8,000 footfall to the hospital. Part of a 6.6 hectare site being developed by Wharfside Regeneration for Plymouth Hospitals Trust, the new car park was designed by international architects S333 and built by Sir Robert McAlpine Limited.The eco-friendly design features green walls with climbing plants on the two lowest levels, steel latticework on the next two and timber latticework on levels 5 and 6. We recommended our RB1X Spring Steel Buffers that ‘give’ in a collision to absorb impact forces and minimise damage to the barrier, the vehicle and the car park deck that the barrier is mounted on. After an impact, the barrier returns to its original position to provide ongoing protection. Berry Beam rails were used to give a more refined  appearance than the traditional Armco ‘W’ section.A BS 6180 compliant pedestrian handrail was mounted above the barrier on post extensions of 1,100mm high and the space in between filled with anti-climb mesh to stop pedestrians from falling through, or even climbing over the barrier.

Coventry Station UpgradeStreet furniture | Railway seatingPlatform seatingLocation: CoventryCoventry Rail Station introduced some Townscape CT Block Seats as part of a multi million £ upgrade.The new railway station building and multi-storey car park is open, buses can now use the interchange on Warwick Road which is accessed via a tunnel under Warwick Road.As the existing railway station is Grade II listed, which means there is limited scope for creating additional capacity within the existing station building, the Coventry Station Masterplan project was developed to deliver new infrastructure to meet current and projected future passenger growth. Using funding from the West Midlands Combined Authority and the Coventry and Warwickshire Local Enterprise Partnership Growth Deal, £82million was used to improve accessibility and capacity.The new station building will house up to five retail units and has passenger facilities including new waiting rooms, toilets and ticket machines. The new multi-storey car park has been constructed above the new station building with integrated lift access from the car park to station level. The upgraded facilities include Townscape CT Block Seats with Hardwood Deck Seat Tops to provide additional seating to the busy Rail/Bus/Taxi interchange. The Contractor was Buckingham Group.

Achieving a Building Regulations compliant level of soundproofing in residential conversion projects demands the use of superior quality soundproofing materials and systems, which are deployed in the right way. It is an approach that a recent development in the south Manchester suburb of Levenshulme perfectly encapsulates, with outstanding results for the developer and future residents.Hush Acoustics was tasked to provide a solution for a conversion project at 31 Albert Road, Levenshulme by Meridian Construction & Refurbishments. It was converting the five-bedroom Victorian dwelling into two residential flats, which meant the separating floors had to be constructed in a way that would meet the acoustic standards set out in Approved Document E of the Building Regulations for England and Wales.Under Approved Document E, ‘material change of use’ projects like this must incorporate soundproofing in the floors between individual dwellings to reduce the risk of nuisance sound transmission. Evidence that the floor construction complies with the standards is normally provided to building control through post-installation acoustic testing, which on this project was undertaken by C80 Solutions.Hush Acoustics was invited to attend the site by Meridian when the building was at its early rip out stage. This provided an opportunity to get a clear understanding of the situation and discuss the options for the separating floors to ensure they would meet the requirements of Approved Document E.The floor structure was a traditional timber floor with floorboards. There was only a very limited specification in the design, so Hush was able to help by providing specialist technical consultation to develop the most cost effective and easy to install solution for the Meridian site team.Following the site visit and inspection of the building, Hush Acoustics’ soundproofing specialists developed an acoustic product specification for the separating floors that would not only meet the minimum standards of the Building Regulations, but exceed them with ease.Hush-Panel 17, a thin MDF overlay board which incorporates a 10mm Hush-Felt resilient layer, was installed over the structural deck. This was glued using Hush-Bond Panel Adhesive and isolated at the perimeters using Hush-Seal 20.The structural deck consisted of the original floorboards that had been overboarded with a thin plywood. This provided a solid flat surface to install the acoustic flooring. The existing ceiling was left in place where possible to avoid the need for ripping out where it was not required, which allowed for a new acoustic ceiling to be installed. This consisted of two layers of 15mm Fireline plasterboard on a suspended frame with Hush-Slab 100 sound absorber slabs placed within the ceiling void.As part of the service, Hush Acoustics arranged for the acoustic testing to be carried out by testing partner C80 Solutions. They recorded the following results:Airborne – 53 dB DnTw+Ctr and 52 dB DnTw+Ctr (the higher, the better)Impact – 48 dB LnTw and 43 dB LnTw (the lower, the better)These are very good acoustic figures for a separating floor in a residential conversion project of this kind, demonstrating what can be achieved with a combination of high quality soundproofing materials are combined and installation correctly.Ultimately, this outstanding acoustic performance for the separating floors will help to ensure a high level of satisfaction for the future residents of these modern apartments.

Four Glazing Vision Three Wall Box Rooflights were specified on four modern new build homes in the heart of Los Angeles which have provided the clients with access to the terrace which would have otherwise not been possible. The Three Wall Box Rooflights fit perfectly with the modern aesthetic and were chosen to not only give access to the roof deck, but to also increase the amount of natural daylight entering each home.“We think the finished rooflights look great as crowns to each of our buildings. They will be a nice addition to these homes and hopefully inspire developers and homeowners to spread the word throughout Southern California regarding the benefits of the rooflights too!” – Michael Wilson-Katsibas, Partner, KAP Studios.Following the demolition of the existing 1200 sq. ft bungalow, the remaining site was still relatively cramped considering the bungalow was being replaced by four new dwellings. In order to provide enough living space and retain the beautiful views of the Los Angeles skyline, KAP Studios had to come up with a creative solution to achieve their brief.To make the most of the small, 8,400 sq. ft plot, KAP Studios incorporated a basement and terrace area into each home which transformed the buildings from two-stories to four-stories, which helped unlock the full potential of these beautiful homes in Culver City.Starting from the ground up, the basement is partially sunk beneath the pavement and accommodates two parking spaces, meaning more space has been granted to the garden area at ground level. This gives each home its own private back garden, as opposed to a less visually impressive driveway. It also includes a pantry and wine store to round off the basement area. The second floors are occupied by an en-suite bedroom which includes a balcony area overlooking a collection of beautiful LA properties.The east side of the bedroom houses an equally impressive bathroom, making it the second Master Bedroom in the homes. The terraces of each building are by far the most unique feature of the homes. With over 20 years of experience in roof access rooflights, Glazing Vision were engaged to help with this important part of the project. Operated by the touch of a button, our Three Wall Box Rooflights were fixed to the existing building structures at the back and either end. The rooflights take up only 170 square feet on top of the roof, leaving the client with a vast amount of additional living space which can be utilised all year round. Our rooflights are installed by our very own expert installation team.“We wanted to both feature the stairs as light shafts to illuminate the interior spaces throughout the day with the California sunlight as well as allow for seamless roof deck access for the future residents.” – Michael Wilson-Katsibas, Director, KAP Studios.Our Three Wall Box Rooflights are a perfect example of how Glazing Vision can help you utilise your roof space whilst providing your home with added natural daylight.

The Protec System was used to waterproof the domed green roof areas of this striking, sustainable house development which was featured on Chanel 4’s Grand Designs. With an ambitious vision and a tight budget, Robert and Milla Gaukroger set about transforming a dated 1980’s house overlooking Lake Windermere into a state-of-the-art, eco-conscious home. Since the house lay in beautiful hillside surroundings, in order to blend into this setting, the domed roofs of the house were to be covered with a wildflower meadow mix to provide a green roof construction.The SolutionThe Protec System was chosen as a waterproofing membrane for the roofs as it is ideally suited for green roof applications. Lightweight, flexible and highly durable, the system can easily accommodate structural expansion movements and is tough enough to resist root penetration. The Protec system was applied to over 350m2 of domed roof to provide a long-lasting waterproofing membrane.The key reasons why Eastleigh chose Protec are the same reasons that has seen it become one of the fastest growing cold-applied liquid roofing systems in both the new build and refurbishment markets. Combined with the timber cladding to the verticals of the building, the finished aesthetics of the development blended seamlessly with the surrounding areas.A warm roof build-up that can be made waterproof at multiple stages:For larger projects the Protec system can be made temporarily waterproof at two stages prior to the application of the full waterproofing system. The first stage is upon installation of the sealed, aluminium-faced vapour barrier.The second phase follows the reinforcing of the foil-faced insulation board joints with Protec resin and taping mat. This enables a much more controlled approach to the installation with a greatly reduced chance of rain causing disruption and damage during the works.Highly flexible membrane:Regardless of the size of the roof, Protec forms a homegenous membrane, without a single joint or seam and without the need for any expansion joints.RapidCure technology for quick installation:The application of Protec as a liquid, through to the curing process where a solid, tough membrane that can be walked over, takes only 30 – 60 minutes. This enables large sections of the roof to be fully completed in a short space of time.Installing the Roofing SystemsThe Protec System provided waterproofing to all flat roof areas as well as the extensive parapet wall sections. The roof areas were made up of two designs: the Protec Warm Roof System (approx 7,500m2) and Protec applied to concrete as part of an inverted roof design (approx 1,000m2).The roof installation was carried out with a planned, phased approach that was synchronised to the wider construction schedule. For the warm roof areas, the first stage was to fill the troughs of the structural metal roof deck with acoustic insulation infills that will dampen external noise within the leisure centre. Next, the crowns of the deck were primed ready to receive the self-adhesive vapour barrier.The use of a high-performance aluminium vapour barrier not only eliminates the risk of condensation within the roof, but also provides temporary waterproofing protection, which is extremely useful on larger works such as this.The Polyroof RES Insulation boards, which comprised of a two layer system totalling 170mm to achieve a U-Value of 0.14 W/m2K, were bonded using high-performance PU adhesive to the vapour barrier. Following the wind uplift calculations it was determined that mechanical fixings were not required for this application – making for an extremely rapid installation. As you can probably imagine, fixing through 170mm of insulation into the crowns of the metal deck can be a tricky and time-consuming task.A key advantage of using a tongue and groove insulation system is that the finished surface of the roof is smooth and level without any unsightly board steps that can also lead to standing water issues. The insulation board joints were sealed using Protec resin with Polymat Taping Mat 450 which, in addition to providing additional strength to the joints, also creates a temporarily waterproof layer.For the inverted roof sections, Protec was applied directly to the primed concrete/screed surface. The membrane was inspected by Polyroof Technical Services, signed off and then covered with inverted roof components. An interesting fact when using Protec in inverted roof situations is its incredible durability performance – as tested by the BBA, Protec “can provide an effective barrier to the transmission of liquid water and water vapour for the design life of the roof in which it is incorporated”.Monitoring and CompletionThroughout the duration of the contract, Polyroof Technical Services carried out regular site visits that were reported back to Interserve as part of Polyroof’s free-of-charge contract monitoring service. This enabled the client to keep up-to-date with the progress of the roof installation in detail and also provided peace of mind that the original specification was being closely followed and implemented.Polyroof worked closely with the Roofline Group during the installation, enabling the challenges were identified and solved in an efficient and coordinated manner – saving the client time and money.

Client: Bruntwood Estates Specialist Contractor: Grade-2 Structural Repairs Main Products Used: Emseal SJS SystemThis busy, multi-storey, prime location, car park is located between Manchester United’s Old Trafford Football Stadium, Lancashire’s Old Trafford Cricket Ground and Trafford House, a 12-Storey commercial development. The businesses use the car park during the week and then it is reserved for MUFC fans on matchdays and weekends. The car park was undergoing scheduled structural inspection, when it was discovered that the traditional compression joints were failing in the wide structural movement joints on the access ramps. This meant they were now leaking and allowing water ingress, which could lead to damaging salt deposits on expensive vehicles, as well as potential corrosion and damage to the reinforced concrete decks and the structural frame itself. These joints needed to be made watertight and accommodate significant horizontal and vertical movement, as well as traffic impact and weathering. The engineers looked for a solution that could safely repair and seal the joints, but with only minimal ramp closure or downtime, and the Emseal SJS System was selected as the ideal solution, as it could be installed in just two short, phased closures at weekends, when there were no home games. In the first weekend, with only one lane closed, the failed compression joint was removed and the joint arrisses made good with fast setting resin, then on the next weekend closure, the bespoke lengths of Emseal SJS were installed with access only required from above.  

Hush Acoustics provided an acoustic solution for the Aviation Academy in Norwich as part of its project to transform the building through the creation of an innovative learning environment. Based within a World War 2 aircraft hangar, home to a museum, cafe and now classrooms, catering for pupils and youth organisations as well as holding events and conferences, this academy accommodates a wide variety of uses and needs. Hanson Barron and Smith Architects worked on the design of the custom facility, with the aim to create a mezzanine floor within the atrium on which classrooms would be created.The atrium itself holds conferences that can accommodate over 300 people, so in order to ensure the acoustics within the building were fit for purpose, a site visit was conducted to assess how the required acoustic standards could be achieved.On visiting the site, an acoustic concern within the building was the footfall noise being created from the mezzanine floor.The solution proposed after calculating the requirements of the areas was 1500m2 of Hush Panel 17, which would be fitted over the structural plywood deck.Hush Panel 17 is a thin overlay board which minimises floor build-up without compromising performance. By reducing impact sound transmission through the separating floors, it achieves excellent results, with the upper layer of moisture resistant MDF providing a consistently smooth surface for application of floor finishes.Working with Robert Goss from Hanson Barron and Smith and RG Carter who were the main contractors on site, over 2000 sheets of Hush Panel 17 were supplied and fitted to the area.

Chelmer Waterside near Chelmsford in Essex, is a residential-led riverside quarter, delivering new homes and public spaces south-east of the city centre. The site of a former gas works, the land is being regenerated to offer high quality affordable housing on the River Chelmer peninsula.SURFACING REQUIREMENTAddagrip approved contractor The TP Group was appointed by Taylor Wimpey to assist with various aspects of the project, including Landscaping, Painting, and Fire Protection. They were also pleased to help with a very demanding first floor level crescent and second floor walkway within the heart of the ongoing development.Many logistical challenges of surfacing the podium decks were managed and overcome, alongside time restraints and weather conditions. The original plans of using pedestal paving were shelved due to time restraints and material availability. Following discussions, an Addagrip Terrabase Classic Resin Bound no-dig gravel system with a Stonebound finish was selected as the surfacing product due to speed of installation, aesthetics and availability.The TP Group installed a 365mm deep substrate, consisting of various materials, for the podium balconies on the first and second floor level ready for Addagrip’s Terrabase Classic resin bound system. A Stonebound 6mm bespoke blend was selected as the Terrabase Classic resin bound finish with 297m2 being installed on the first floor level crescent and 66m2 on the second floor walkway.The new paving offers a decorative, low maintenance surface with excellent slip resistance.The installation was completed in January 2021.

Vehicle and pedestrian safety barriers for edge protection on perimeters, ramps and other areas in three multi-storey car parking at a new shopping mall adjacent to the London Olympic Park.Berry Systems installed one of our largest ever car park safety barriers projects at Westfield Stratford City with over 7 kilometres of Berry Beam barrier, all mounted on our impact absorbing spring steel buffers.The £1.5bn Westfield Stratford City complex covers an area of 1.9 square miles and houses 300 retail outlets, 70 food outlets, 3 hotels, multiplex cinema, bowling alley and casino. It also has 5, 000 parking spaces across 1 adjacent and 2 integral multi-storey car parks. The safety barriers were very carefully specified by architects: Buchan Group International. The car park structures are metal framed with concrete decks with an exterior expanded metal mesh surround and cladding. All floors have our Berry safety beams mounted on RB1X and GH spring steel buffers to provide full perimeter protection meeting BS EN 1991-1-1 and BS 6180 standards.All the ramps in the two overground car parks have curved Berry Beam barriers to match the varying radius of the ramps. On tighter bends and at ramp exits, chevron signs have been mounted directly to the barriers. All ramp returns and split level areas are protected by our barriers, again mounted on RB1X buffers with handrail extensions and anti-climb mesh.