"commerce protective services"

A range of Gradus wall protection systems and flooring accessories have been installed at the University of Hull’s brand-new Health Campus, helping to improve the building’s safety and enhance the facility’s modern aesthetic. The new £28million Health Campus boasts the new five storey Allam Building which features a mock operating theatre, hospital wards and intensive care unit.

Improving accessibility has always been a recurring theme in the specification of Neaco’s products and so it proved again when the company’s balustrade systems were called into service for entrance ramps at Humberside Fire and Rescue Service’s new cutting-edge Hull Central Fire Station. Jefferson Sheard Architects sought to design an accessible and welcoming facility to serve the local community. Neaco’s contribution was integral to this objective with aluminium handrails and balustrade to steps and two extensive ramps at the main entrance. The system was also specified with glass infill panels for a first-floor terrace.

When you design a building that will be used by lots of people, like a tower block, you need to make sure that the building has the correct level of fire prevention and fire protection equipment. In instances where this isn’t the case, tragedies like the Grenfell Fire can happen. The importance of passive and active fire protection methods are vital for the safety of the intended occupants, but how can you ensure they’re going to be safe?

Over 2,000m² of BEMO N65/400 in stucco embossed aluminium was supplied on the new motorway services for the M6 near Rugby. Lengths of over 60 metres required the panels to be site rolled at eaves height, while the envelope took advantage of the non-metallic GFK halter to ensure resistance to the friction forces associated with thermal movement of long roof sheets.

April 2017 and the future looked bleak for a fire-engulfed net repair factory on the small island of Scalpay. Fire crews from Scalpay, Tarbert, Leverburgh and Stornaway rushed to the scene, as the massive blaze took hold of the facility and the roof looked in danger of collapse. They deployed high pressure hoses to douse the conflagration.Opened in 2008, the factory employed 14 staff and had been used to clean, repair and apply treatment to salmon farming nets. The Norwegian owned operators of the Net Services Scotland site faced an uphill struggle to get the site back up and running again. Hampered by the remote location of the Outer Hebrides and its distance from the mainland.

Leading timber processor, James Jones & Sons Ltd, specified EGGER Protect at its new facility near Lockerbie. The 18 acre Hangingshaw development is a strategic investment for the company, and EGGER Protect contributes to its successful implementation. EGGER Protect flooring was installed on all of the high-level walkways and access platforms around the advanced production machines. This application brings health and safety benefits, with the textured surface of the board offering market-leading anti-slip characteristics.The product is durable, easy to install and keep clean.

Zentia worked with Ryder architects to help showcase products that can provide an in-depth insight and mechanics into behind the scenes of suspended ceilings. Featured areas was specified to use Zentia Axiom C Canopies with Aruba Max Board tiles, this enabled the students to see the suspension systems used and to showcase services behind the canopy.Through the project Aruba Max was used due to excellent acoustic performance for sound absorption and attenuation. Prelude 24mm XL2 grid was specified due to ease and speed of installation. Axiom Transition was used to provide a smooth connection where tiles meet plasterboard boarder margins throughout the project.Hydrabloc was used within the WC areas due to excellent moisture resistance capabilities and providing a Class A sound absorption. Zentia Prelude 24mm Corrosive resistance grid was specified alongside Hydrabloc due to the robust cleaning regime in keeping with being a technical college.Harton Academy can have peace of mind with Zentia 30-year system warranty for Axiom Canopies and Hydrabloc due to it be installed on Zentia Prelude 24mm XL2 grid, whereas Aruba Max comes with a lifetime warranty.These tiles have a high level of recycled content and are fully recyclable at their end-of-life.

A Bradford railway bridge near a junior school needed a proven solution to keep road users and the young pedestrians safe as part of a renovation. The solution for this project was the use of our Trief GST2 kerbs to protect both the footpath and the parapet to each side of the railway bridge and to stop vehicles from deviating onto the pavement and, ultimately, accidental incursion onto the railway lines. To view the whole case study please click on the link below.

A complete wall protection system from Gradus has been installed at the newly refurbished Lysholm Department of Neuroradiology at the National Hospital for Neurology and Neurosurgery (NHNN). Supplied and fitted by the Gradus Contracts Team, the system includes wall guards, corner guards, kickplates and bollards from the stainless steel range, plus handrails from the 450 timber range, which is designed to meet guidelines in Approved Document M, BS8300:2009+A1:2010 and HBN00-04.

Helmsman manufactured, delivered and installed 172 two compartment heavy-duty laminate lockers with welled locker doors for Bombardier Services UK modern office space. Each bank of laminate lockers has an integrated cantilever bench running across it, which is a great space-saving solution.This locker room is an ideal space for staff and visitors. The bright area and durable lockers work well together.

Fully compatible products from the range of TBA FIREFLY™ have been chosen to compartmentalise roof voids between apartments and communal lobbies of a large apartment building in the London Borough of Lewisham, providing 120 minutes fire integrity protection as part of a wide ranging refurbishment programme carried out earlier this year.The contract on Lewisham Homes’ Commodore Court in Albyn Road has been led by the sector specialist construction company, Mulalley & Co. with London/Sevenoaks based CLM Fireproofing carrying out the installation of the TITAN Lite™ 120:60 barrier system, in combination with Collaroll and the use of ancillary products from the FIREFLY™ range.CLM Fireproofing was founded 30 years ago by Clive Miles and has established a reputation as a leader in the fields of both passive fire protection and fire-stopping; working in a variety of sectors on projects right across the UK. A regular user of the FIREFLY™ range, many of its operatives have attended courses at the company’s premises in Rochdale to become trained FIREFLY™ installers.The Site Agent for CLM, Virginijus Pasvenskas, commented: “There was initially an intention to use a mineral wool flexible fire barrier, but the product was not tested for the scenario installed around the services such as a downpipe and it was upgraded to the use of the FIREFLY™ system by the client/project team. The installation of the TITAN Lite™ and the Collaroll to wrap the trusses and the services went very well and, as well as supplying specific details for the work, FIREFLY's technical team came to site to inspect the works. We completed our contract on schedule back in the summer.”TITAN Lite™ 120:60 has been developed for use in vertical separation or compartmentation situations, offering 120 minutes integrity and 60 minutes insulation and is able to be sealed around penetrations. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including tower blocks and other HMOs.The flexible woven material is easy to cut and fix, and is chemically treated to improve its cooling properties and therefore prevent temperatures rising in adjoining areas. The system has been fully tested to BS 476 Parts 20 & 22 and is third party certified by IFC. The six metre long rolls of TITAN Lite™ 120:60 have a minimum thickness of 6mm and are installed using special staples as well as high temperature adhesive.Employed as part of the FIREFLY™ System and also to wrap the services which penetrate barriers such as PHOENIX, ZEUS Lite™ and APOLLO Lite™, Collaroll comes in a roll which unwraps to 10m long x 300mm wide with a sewn in concertinaed skirt. The skirt can be moulded to shape to seal it neatly to the upright barrier, which is usually at 90 degrees to the Collaroll and fixed into place using the FIREFLY™ high temperature adhesive. The R31 Staple Gun and Staples are used to staple the Collaroll to itself tightly around the penetration.

The Ochiltree Community Hub is in the heart of the Cumnock community in Ayrshire, Scotland. EGGER were delighted to donate EGGER Protect structural flooring boards and Joint & Joist Adhesive to this community project. Located less than 2 miles from EGGER’s Barony plant in Auchinleck, the contribution to the redevelopment by the company helps to benefit the residents of the local area. The aim of the community centre development has sought to support the local community and surrounding areas with a number of initiatives in line with their charitable aims.

Here at Helmsman, we have manufactured and installed two-compartment bespoke laminate lockers multiple times, and this was our third time working alongside Bombardier Services UK. The specification of the lockers was 1900mm high, 300mm wide, and 450mm deep. The bespoke laminate lockers were completed with end panels and sloping tops which is an excellent choice that reduces dust collection.The body of the laminate lockers was in our standard shade of ‘Ice’. The doors were in the shade of ‘Primeval Oak’ by Greenlam to match the light aesthetics of the room as well as to match the lockers that were manufactured and installed by Helmsman in 2022. The Laminate lockers were decorated with oval laminated number plates above the Camlocks. The Camlocks are a great choice in accessories, they assure the users that their personal belongings are safe and secure.

FIREFLY™ PHOENIX Offers Temporary Fire Protection For Fenchurch Street OfficesThe refurbishment of two complete floors to one of the City’s largest office buildings is making use of the well proven and versatile TBA FIREFLY™ PHOENIX smoke & flame barriers, to create temporary fire barriers while the work is being carried out: protecting people and property across the rest of the five storey structure where business continues as normal.The project at 30 Fenchurch Street, EC3 is being led by Overbury – one of the capital’s most experienced fit-out contractors, while the London office of HLW Architects is leading the design team. T&R Fire Protection meanwhile is the specialist sub-contractor carrying out the installation of the PHOENIX around the atrium, as well as other passive fire protection measures as the scheme evolves.In total T&R has fixed 22 rolls of the lightweight PHOENIX material to create the two hour integrity smoke and flame barriers around the glazed edge of the floor plates at levels Three and Four of 30 Fenchurch Street. The lightweight barrier has been fixed to the bulkhead and at intervals down all of the existing columns, before finally being secured across steel angle sections bolted to the floor slab.IFC Certification duly inspected all 160 metres of the temporary barriers – up to 3,300 mm in height - once installed, on behalf of Overbury and duly issued a certificate of compliance. The permanent works are expected to include creating fire breaks within the ceiling zones at 20 metre intervals, as part of T&R’s overall contract for Fenchurch Street in the region of £250K.The Site Manager for T&R Fire Protection, Tom Port Smith, commented: “We’ve used PHOENIX and other FIREFLY™ products on many hundreds of projects in the past, but in this case it was the insurers for the project who insisted on the installation of the screens to protect the atrium while the sprinkler system was being replaced. The installation though was relatively straightforward and in our work generally, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. We base our recommendations and design drawings on TBA FIREFLY™ standard details and, once they’ve been approved, go in and install the flexible fire barriers.”Tom, like the majority of T&R Fire Protection’s operatives, has attended training sessions at FIREFLY's premises in Rochdale, reinforcing their trade skills and gaining valuable insights into the performance parameters of the different barriers in the range.FIREFLY™ PHOENIX is a lightweight smoke & flame barrier developed to enable compartmentation within buildings to provide up to 120 minutes’ integrity under BS476 Parts 20 & 22. Certified by IFCC, the flexible and straightforward to install material and is suitable for both new-build and retrofit situations.Manufactured from woven and non-woven glass, the FIREFLY™ range is designed to optimise resistance to flame and smoke as well as offer heat protection in a wide range of scenarios. The flexible barriers are easy to install horizontally or vertically using a full selection of ancillary products. Used mainly in the construction industry across the UK and Europe, FIREFLY™ Fire Barriers help to contain fire, giving building occupants extra time to evacuate and the fire service to enter safely.

Gradus has supplied and installed a range of bespoke wall protection solutions throughout the ground-breaking new Proton Beam Therapy Centre at The Christie NHS Foundation Trust in Manchester. Gradus supplied and installed its SureProtect Pure® hygienic wall cladding in White and Iceberg shades. Specially designed to create an impermeable barrier to moisture and bacteria it features a smooth, easy-to-clean surface to ensure a hygienic solution that meets ‘Health Building Note 00-09: Infection control in the built environment’

The ChallengeAs part of this strategy, the decision was taken to replace a fully-glazed non-fire-rated internal atrium with a new, high-performance fire-rated solution to ensure the highest levels of fire protection.Spanning five storeys, the atrium would create a functional yet architecturally stunning light-filled centrepiece within the modern office space.Forming part of the broader regeneration of Dublin Landings, bringing this aspect of the project in on time would be critical.As a result, Walls to Workstations were tasked with removing and replacing the five-floor atrium in just six weeks to see the project through to completion.The SolutionWorking closely with W2W, Pyroguard supplied more than 500 square metres of toughened EI30 fire safety glass to the project. Equipping fabricators with the flexibility to deliver on ambitious architectural projects which require large expanses of glazing, Pyroguard toughened glass provides protection against flames, smoke and radiant heat and delivers impact classification of 1B1 to EN12600.Complementing modern architectural ambitions, the inclusion of large areas of toughened glazing within projects helps to safely incorporate natural light into buildings, something which is critical in renovation projects where buildings are being transformed from their original purpose.In practice, this sees spaces flooded with natural light, elevating levels of light transmission throughout a building and having a positive impact on occupants’ wellbeing – crucial in delivering functional and inspiring workspaces.

Despite the challenges posed by completing construction and opening during the first lockdown, the new Skelton Lake Motorway Services project opened in March 2020 as planned, providing essential services to hauliers and key workers travelling during the start of the pandemic. The project incorporates an extensive green roof build-up to minimise the visual and physical impacts of the development on the surrounding country park and to enhance the biodiversity of the project.The wildflower green roof design provides multiple environmental benefits; including provision of a new habitat for local insect and bird life, helping to lower the site’s carbon emissions by absorbing heat emitted from the building into the cooler roof surface - reducing the air conditioning demand in the summer months. The green roof build-up also provides a level of insulation against heat loss in winter. 

Project:Surespan designed and manufactured several floor access covers for the £6.5m Liffey Service Tunnel Project in Dublin Ireland.The service tunnel is one of the crucial links for the rejuvenation of the docklands, it will carry water mains to the docklands and transfer wastewater to the treatment plant at Ringsend. The 260m tunnel will also carry district heating pipes, gas mains, and electrical and telecommunication cables.Products:Surespan designed and manufactured several floor access covers including SAC Flush floor access covers and HIAC Recessed floor covers.All the access covers were supplied with either a gas spring-assisted opening, hydraulic or electric with a retractable safety grid and pedestrian (FACTA Class ‘A’) Loading. A hydraulic HIAC was also supplied with a FACTA Class ‘D’ Loading which is the equivalent of an 11-tonne wheel load.

A significant milestone for not just the tidal sector, but for the development of renewable energy technology, Scottish engineering company Orbital Marine Power, Ltd. (Orbital) will soon launch the Orbital O2 – the world’s most powerful tidal turbine – in the waters off the Orkney Islands.We have been involved in the project since Orbital’s prototype SR2000 turbine was built in 2015, proving their technology and leading the way for the further optimised O2. As well as high-performance anti-corrosion coatings to protect the steel structure, we supplied Hempaguard X7 for the turbine rotor blades.

A client with a strong reputation for sustainable construction needed a flood defence system to protect a large substation in Croydon.UK Power Networks and ClancyUK Power Networks is responsible for electricity distribution and maintenance across London, the southeast and east of England. Clancy contracts for UK Power Networks refurbishing substations. Clancy was founded in 1958 and is now one of the largest privately owned construction firms in the UK. Its vision is to be “trusted to deliver smarter, greener infrastructure brilliantly.”The challengeClancy managed construction and implementation of the Andel flood defence system for UK Power Networks.Location: the substation is located within a flood risk area and is critical for maintaining electricity supply to thousands of homes and businesses.Sustainable: they wanted an environmentallyfriendly approach in line with their commitment to sustainability.Disruption: the aim was to protect transformers from flooding to maintain reliable electricity supplies to homes and businesses.Protection: they needed to protect the transformers from flooding to maintain network resilience.Inconvenience: they wanted a solution that would cause minimum disruption to the site allowing for continuity of service.Cost: they needed a cost-effective solution compared to the costs normally associated with traditional flood defences.The solution Andel FloodWall and Andel FloodBlox® Andel FloodWall is a cost-effective, environmentally friendly alternative for perimeter flood defence and is suited to commercial, residential, new build and retrofit installations. Panels and posts are constructed from robust, 100% recycled, nonporous, post-industrial plastic waste.This means the substation now has:A sustainable, cost-effective and environmentallyfriendly system compared to traditional flood defence systems.A flood defence system with a lower carbon footprint compared to an all-concrete construction.A modular solution that was easy to transport and speedy to assemble on site with minimum disruption.A robust perimeter flood defence designed and tested to meet the requirements of British Standard BS 851188-1:2019 for Flood resistance products.Andel FloodBlox® is an easy-to-use, lightweight, demountable flood barrier for all types of openings such as gates, house doors, patio doors, garage doors, warehouse and factory doors as well as creating easy access within a perimeter flood defence wall.This means the substation now has:A lightweight, easy-to-use demountable flood barrier allowing easy access to the bund.Proven technology that uses the natural pressure and weight of floodwater to create a watertight seal.The result Sustainable: Panels and posts are constructed from 100% recycled, post-industrial plastic waste, reducing the carbon footprint compared to traditional allconcrete flood defences.Convenient: A modular, easy-to-assemble system causing minimal disruption to on-site operations as no heavy machinery was required.Effective: FloodWall and FloodBlox® provide a robust, tried and tested flood defence solution allowing easy access to protected areas.Cost: The modular and flexible system reduced installation time and delivered a cost-effective solution.Excellent communication: The on-site Andel team worked closely with the client, ensuring open and constructive dialogue with regular updates on progress and timescales.Added value: The project also included installation of Andel’s market-leading BundGuard® units, a bund dewatering solution previously supplied to the client and contractor on other sites.What the customer said;We made the right choice working with Andel on the UK Power Networks Croydon project. Andel has worked with Clancy before providing pollution prevention products and maintenance services for the electrical distribution sector.As a safeguard against the increasing risk of flooding, Andel were able to provide a sustainable and cost-effective solution for the Croydon substation, protecting UK Power Networks transformers from the risk of future flooding.Craig Aust, Project Manager, ClancyIt was great to work with Clancy on the UK Power Networks Flood Defence project at Croydon Substation. We were tasked with delivering a robust, reliable and environmentally sustainable solution to protect the transformers on site from the risk of flooding. Working closely with Clancy Project Manager, Craig Aust, we were able to navigate the project to deliver a solution that sat in line with their values of delivering quality and sustainable practices. We are delighted to have successfully delivered a flood defence system that ensures the transformers are protected from the ever-increasing risk of flooding. 

PhotonCheck-A1 VCL Protects Katara Lusail Hotel Qatar

A fast paced commercial project for Welcome Break motorway services at Newark. A2-s1,d0 fire rating was mandatory here, yet the design intent was to use wooden cladding to make the building pop from far away. Contemporary design with traditional materials are trending now, but often the strict fire regulations rule out materials that would be preferred. Technowood UK was able to supply a real wood veneered aluminium cladding that is compliant with all the regulations, and PSBK Limited was able to complete this installation in just 3 weeks.

When you design a building that will be used by lots of people, like a tower block, you need to make sure that the building has the correct level of fire prevention and fire protection equipment. In instances where this isn’t the case, tragedies like the Grenfell Fire can happen. The importance of passive and active fire protection methods are vital for the safety of the intended occupants, but how can you ensure they’re going to be safe?

In this wooden building in the center of Vienna, the walls, ceilings and floors are made from solid wood(CLT). The construction protection covering and sealing for the individual elements were achieved with the SIGA products Wetguard and Rissan.

Award winning McCullagh’s Classic Service Station (Spar) chose Design Tile, Shaletone on Dark Grey grout for their recent refurbishment.After the refurbishment McCullagh’s Classic Service Station went on to win three prestigious business awards – ‘NI Retailer of the Year’; ‘Food to Go of the Year’ and UK ‘Forecourt Retailer of the Year’.

MSA Safety’s recent Height Safety Day gave nearly 100 workers at INOVYN’s Runcorn site a first-hand look at how the global safety equipment manufacturer is innovating in fall protection and brought them up to speed on the latest regulations. The information day took place at the INOVYN site in Runcorn, owned by INEOS Group, a global manufacturer of petrochemicals, specialty chemicals and oil products.

Raybloc (X-ray Protection) Ltd takes great pride in presenting our latest case study showcasing our outstanding collaboration with Singleton Hospital in Swansea. This partnership entailed the manufacturing and installation of cutting-edge radiation shielding solutions, including a Frameless Operator Screen, a wide range of lead-lined doorsets, and internal viewing windows to match. As well as these fixings, Raybloc also supplied and installed the lead-lined wall panelling to the controlled areas, making the process of lead shielding as simple and hassle-free as possible for the contractor and Trust. These advanced products not only prioritise the safety of patients and staff but also significantly enhance workflow efficiency and create a therapeutic environment.

After carrying out a fire door survey, Warwick Hospital undertook measures to protect and refurbish the fire doors throughout their sterilisation unit with Yeoman Shield door protection products.Catering for the sterilisation requirements for all wards and departments within South Warwickshire NHS Foundation Trust as well as GP surgeries and clinics, the department is a hub of activity. The movement of heavily laden trolleys and equipment around the unit had caused impact damage to the department’s doors around door edges, glazing beads and the door fronts. Damage to these particular parts of a fire door can render it unfit for purpose.In this instance Yeoman Shield fired rated door protection products were used to refurbish and then protect from further impact damage. Door edge protectors were fitted to the leading and meeting edges of the doors with door protection panels installed to a height that would shield the most vulnerable areas.For additional protection, particularly to ward off blows to the glazing bead section of the doors, Yeoman Shield’s rub rail was fitted to the face of the door just below the vision panels. Colours of Blue and Red were chosen to distinguish between the contaminated and sterile areas within the unit.Yeoman Shield door protection products come with current and relevant fire certificates and do not affect the integrity of a fire door when installed but will continue to protect from detrimental impact damage for many years to come.Malcolm Bloxham Reactive Supervisor commented “We have used Yeoman Shield for many years and find their door protection products perfect for maintaining our fire doors in good working condition, helping to reduce our door maintenance costs by minimising repair and replacement requirements.”

CJH Tiling Services, has 10 years of tiling experience, their business covers all aspects of tiling, including kitchens, bathrooms and floors. The client’s brief was to seamlessly join two areas of tiled flooring, one upstairs and one down. They wished for a seamless flow throughout, giving the stairwell a light and airy feel whilst being hard wearing and practical.

Yeoman Shield HessianEx wall panels at 1250mm high and 50x50mm Corner Protection Angles in Lilac was fitted on the ground & 1st floor corridors and plaza area. HessianEx panels, cut to 300mm wide was fitted as an attractive protection strip in waiting areas, to protect against chairs being pushed up against walls and causing marks and scuffs.

Seveme’s expertise in metal structure works combined with Pyroguard’s multi-functional range of toughened fire safety glass, Pyroguard Protect, enabled the build of the new Algeria Gulf Bank headquarters. Through the informed specification of additional counterpanes, the curtain wall of this futuristic building was able to achieve an EI120 fire rating, as well as effective solar control. Meanwhile in the internal lobby, where safety and style were key, a unique composition that combined both requirements was used.

The award-winning Skelton Lakes motorway services near Leeds is using bespoke manufactured architectural linings from the Pendock Linea range. GRG pilasters were specified to provide a consistent finish between shop fronts, whilst integrating with the dry lined walls above. They also include a 30mm radius on each corner to ensure there are no sharp edges and a stainless-steel kick plate at the base.GRP bulkheads are used to conceal the steel floor beams at first-floor level, which were manufactured to follow the gentle curve incorporated in the design of the shop fronts. By using GRP it allows a small amount of flex to ease installation and ensures the minimum additional mass is added to the structure.

The modern hotel is just one of several new developments being constructed, as the existing town centre is being physically moved and relocated a few miles away.Working with Glasfasader Norr AB, we supplied our Pyroguard Protect toughened fire safety glass throughout the hotel’s internal atrium.

Location: Canary Wharf, LondonMain Contractor: Canary Wharf Contractors LtdWood Wharf B2 is a modular construction project located on the edge of Blackwall Basin, Canary Wharf.All 279 serviced apartments were manufactured at their specialist construction site, fitted with kitchens and bathrooms and even furniture — before being transported to the site and craned into position.OBEX supplied fire-classified membranes that have been developed specifically for modular construction, including the 0400FR Class B Modular Roofing Membrane, as well as the 0223FR Class A2/W2 Breather Membrane.Storeys: 21Apartments: 279OBEX Fire-Rated products required: 4

A busy access corridor linking one wing to another at a major Yorkshire Hospital now benefits from a wall protection system supplied and installed by Yeoman Shield.The heavy footfall, wheeled equipment and bed trolleys continually traversing the path between two busy wings was starting to take its toll on the walls and corners of the corridor in the form of marking, denting and scratching.Keen to maintain the high smart standards as well as lifecycle and sustainability of the property, the hospital choose a protection system from Yeoman Shield to overcome such damage.200mm Protection Rail was fitted “flat-back” to the wall on one side of the access way with FalmouthEx Wall Protection Panels installed below the rail.Rubber stop ends/returns (new to the Yeoman Shield range) were applied to the rail as added defence against heavily laden trolleys and carts that may come into contact.The opposing wall was also offered protection by the same Yeoman Shield 200mm Protection Rail this time installed on 60mm “stand-off” allowing the system to become a supportive rail for those who require it. The rail was again finished with the durable hardwearing rubber accessories.Matching 75 x 75 mm Corner Protection Angles were put on vulnerable corners on both sides of the walkway completing a comprehensive wall protection system that will help to reduce the time and money spent on redecoration and repair over the lifecycle of the building.More information on Yeoman Shield’s cost-effective wall & door protection systems can be found at www.yeomanshield.com or by calling 0113 279 5854.

Made-to-measure stainless steel worktops, by GEC Anderson, were recently specified by Munkenbeck and Partners at the highly desirable city space known as 55 Gee Street, Clerkenwell.The funky, new build, mixed-use development comprises offices, shops and six, high-end apartments. Four flats have two bedrooms, a two bedroom duplex occupies ground and basement levels whilst the 150 m penthouse has three bedrooms. Previously the site was occupied by a building belonging to Her Majesty’s Stationery Office.Outside, the distinctive street facade resembles a Jenga block game, made up of extruded airbricks, randomly assembled. The bricks allow natural cross ventilation through the wall without having to make the glass panels move.Inside, the contemporary living spaces are high tech and high quality. Concrete, wood, stainless steel and glass dominate the open, elegant and functional spaces. The continuous and expansive stainless steel worksurfaces blend-in perfectly within their neutral and effortless surroundings. Formed in one piece, the GEC Anderson custom stainless steel worktops include integral sink bowls and edge detailing. Full height splashbacks are included to alcove worktops whilst the striking penthouse kitchen includes a stainless steel island element.Stainless steel worktops and splashbacks still are often associated with only commercial kitchens. However, discerning specifiers have always recognised stainless steel as an interesting, practical and versatile worktop material for residential kitchens. GEC Anderson, with its high quality, brushed satin, stainless steel worktops has helped to promote the popularity of stainless steel within this environment, since the early Sixties.Alfred Munkenbeck, Munkenbeck and Partners, chose GEC Anderson worktops because they could be made in one piece, to the exact size and shape required and with the desired edge profiles, sink bowls and details. The highly specific requirements and details are matched by the quality, appearance, design honesty, integrity and practicality demanded by the apartment settings.GEC Anderson stainless steel worktops and splashbacks are made to order in any shape or size, with seamless finish and no visible joins or junctions. The Touch kitchen units, from OIKOS, were supplied by Eurobath Trading UK. A full measuring and installation service was provided by GEC Anderson for main contractor, Morgan Sindall.