"cladding"

Mono M311 Glass Infill Top FixMono M351 No Infill Top FixOrbis OS200 Vertical Bar Infill Side FixPart of a £71 million scheme to construct three new academy schools in the area, Oldham Academy North was designed by Manchester-based architects, Aedas and constructed by Willmott Dixon.The school features a striking glass frontage for the triple height atrium reception with a brick clad teaching block to one side and a vibrant purple frontage to the other. The feeling of light and space created by the school’s two atriums is carried through by HiBuild coated Mono system balustrades with stainless steel handrails. These enable the creation of safe viewing galleries/walkways, overlooking the open plan library mezzanine and the central ‘Agora’ theatre space.The same system was used to create the handrails for the school’s six staircases, maximising natural light and enhancing transparency as students and staff move around the building. Delta Balustrades worked collaboratively with the design team to ensure that the balustrades and handrails not only meet the aesthetic requirements for the scheme but that the fixing detail for the atriums fully comply with loading requirements.

The Silverstone Interactive Museum is a 600m­² motorsport exhibition located at the world famous Silverstone Circuit in Northamptonshire. The £22 million building, built with a contribution from the National Lottery Heritage Fund consists of a fully refurbished WWII aircraft hangar and a new two-storey extension which serves as the entrance to the exhibition. The TECHNAL curtain walling was a key part of the design and enabled large spans of glass to the front and rear of the building. This provides contrast to the iridescent finish and rainscreen cladding. This curtain wall system enabled large panel sizes of up to 2.8m high and 2m wide without additional steelwork that would have detracted from the intended design and added to the cost. The exposed location meant that airtightness and thermal efficiency were also design considerations. Our curtain walling features a thermally broken construction and high levels of wind and weather resistance. Due to the nature of the building and location close to the circuit, the goal with the acoustic requirements was to achieve a balance of reducing the sound from the track without completely eliminating it. This was achieved with TECHNAL systems using standard double glazing without the need for acoustic glass.

Kielder Observatory Surespan designed and manufactured two sets of bespoke double leaf hatch doors for the Kielder Observatory located in England’s largest forest in Northumberland.  The ProjectAs part of the Kielder Art and Architecture program, Charles Barclay Architects designed Kielder Observatory for the Forestry Commission. The all-timber observatory was constructed from Douglas fir with larch cladding, the pier-like building has rotating turrets that house two permanent telescopes and an observation deck. The turrets can be rotated through 360 degrees.The observatory generates its energy using a wind turbine and photovoltaic panels and includes a composting toilet. The observatory has received 2009 awards from the RIBA and The Civic Trust and featured in the inaugural World Architecture Festival.  The ProductSurespan design and manufactured two sets of bespoke double leaf hatch doors for the roof and the front of the Observatory’s two rotating turrets – one to house a 20” Pulsar manual telescope and the other for a small Mead 14” telescope.  FeaturesThese hatches are electrically operated and have been specially designed to open in a specific sequence using remote control via 24v dc actuators.      

IntroductionSurespan design and manufactured two sets of bespoke double leaf hatch doors for the Kielder Observatory located in England’s largest forest in Northumberland. Products suppliedWe supplied;Surespan designed and manufactured two sets of bespoke double leaf hatch doors for the roof and the front of the Observatory’s two rotating turrets – one to house a 20” Pulsar manual telescope and the other for a small Mead 14” telescope. Features:These hatches are electrically operated and have been specially designed to open in a specific sequence using remote control via 24v dc actuators.The projectAs part of the Kielder Art and Architecture program, Charles Barclay Architects designed Kielder Observatory for the Forestry Commission.The all-timber observatory was constructed from Douglas fir with larch cladding, the pier-like building has rotating turrets that house two permanent telescopes and an observation deck. The turrets can be rotated through 360 degrees.The observatory generates its energy using a wind turbine and photovoltaic panels and includes a composting toilet.The observatory has received 2009 awards from the RIBA and The Civic Trust and featured in the inaugural World Architecture Festival.

Buildable"Glass Fibre Concrete (GRC) was identified early on as the ideal material for the project to achieve the desired civic aesthetic but also to avoid adding significant stress to the existing structure." - Nat Keast, Associate, Wilkinson-Eyre.DesignableThe project is an AJ Retrofit Higher Education & Campus Award 2023.The lightweight, three-dimensional GRC cladding panels featuring a stylisation of LSBU’s “sail” emblem give the building a welcoming, civic quality."We worked closely with subcontractor Tellings during the design phase to develop the three-dimensional panels, as well as vertical slats and horizontal bands. Alongside the 100% white bromo brick with white grout used for the existing concrete stair cores and shear walls, GRC helped change the perception of the building."We had to fight hard to keep the GRC through various value engineering exercises, but the university supported us and was able to appreciate the impact of the new facade." - Nat Keast, Associate, Wilkinson-Eyre.SustainableThe building has received a very good BREEAM rating and by retaining the existing structure, total embodied carbon is half of the RIBA 2030 Climate Challenge target benchmark.

Tata Steel’s building envelope products have played a key role in the delivery of the first phase of the Port One giant e-commerce warehousing and distribution storage complex, and were incorporated into Unit No.4, a new 143,000 sq ft purpose-built unit, designed for Ipswich-based FDS Corporation Limited, a Chinese fulfilment house operator specialising in online retail. This building is 17 metres high and has been designed to store goods on pallets and on racking nine levels high.The external cladding solution for Unit No.4 used over 17,000m2 of our Trisomet® and Trimapanel® insulated panel systems. Around 11,472m2 of Trisomet® 60mm manufactured using Colorcoat HPS200 Ultra® was supplied for the roof in Anthracite Matt, as stipulated by the planning consent; while the external building envelope was constructed using over 6,000m2 of Trisomet® 40mm and Trimapanel® 120mm insulated panels manufactured using Colorcoat Prisma® pre-finished steel. The wall elevations used a contrasting colour mix of Alaska Grey, Anthracite, Oyster Slate Grey and White.

Derek Coffey, a college lecturer, renovated a traditional 1800s-built Dutch barn in Llansilin, near Oswestry, Shropshire. The exterior of the barn is clad in burnt larch which looks fantastic and the interior of the home is equally impressive. When the renovation work reached an end in autumn 2023 the finished result was nothing short of stunning. The converted barn will now be a family home for Derek, his wife and their ten year old daughter.Coffey installed ECLISSE pocket door systems throughout the home in order to provide more usable space and better options for interior layouts. A total of ten pocket doors were installed, which were especially beneficial on both of the upstairs bedrooms leading onto ensuite bathrooms. “Installing pocket doors throughout the barn allowed us to save space and to use the space that we do have to better effect,” says Coffey. “We have another ensuite bedroom downstairs with a pocket door and the pocket doors on the downstairs toilet and utility room are especially beneficial as these doors would otherwise have clashed with one another when open – this problem is eliminated with sliding doors.”

Radii joined this fit out in late 2023, where we worked on the design, supply and install of of a tailored glazed partition package for 28 office and meeting rooms.On Level 2, our team designed and installed a stunning Glide framed glazed screen into quad telescopic track between the reception and adjoining communal area.Large meeting rooms on Levels 2 and 4 comprised Parallel 100 (Rw 50 dB) double glazed partitions with red and blue framework respectively; Parallel 100 and single glazed Linear 30 variation screens with bronze and grey frames were utilised elsewhere in the space depending on acoustic requirements. All aluminium was finished in Radii’s dedicated in-house PPC line, with the bronze finish also used on aluminium faced tech panels. Partitions were accompanied by 64mm timber veneered acoustic doors (Rw 41 dB) and double glazed pivoting Hogan doors (Rw 39 dB).Finally, Radii’s own high-performing FirePro steel-clad fire rated screens rated at E60 were installed on all three levels.

Fifty5ive Queen Street, Salford is a new 18 storey, 220-unit residential building in the centre of Salford for local developer Salboy.It includes modern, high-quality 1-, 2- & 3-bedroom apartments and duplexes, amenities include private resident workspace, gymnasium, yoga studios, resident cinema room and a terrace garden. Domis Construction is the preferred construction partner for Salboy on this scheme. In early 2022 they approached Encon Insulation in Chorley looking for a more readily available alternative to the stone wool product already specified. URSA UK Ltd was chosen to fill the void and keep the scheme on track. We supplied over 4500m2 of 100mm URSAPAN BLACK - a unique glass mineral wool rainscreen cladding insulation slab; ·      Euroclass A1 fire rating (non-combustible).·      Thermal conductivity of 0.035 W/mK.·      BBA Certified. Kate Fox, Area Sales Manager for the Midlands stated, ‘Following the success of this initial partnership URSA are now the preferred supplier of rainscreen insulation and our products are currently being used on Anchorage Quay in Salford with others in the pipeline including Derwent Street in Salford’.     

Architect: Moses Cameron WilliamsInstaller: Willmott DixonProduct: Gustafs Linear RibThe new Library at the Luton campus of the University of Bedfordshire which opened in June 2016 was designed by Moses Cameron Williams Architects (of Cambridge) and project managed and installed by Willmott Dixon.The University has been around for over 100 years and teaches in a wide range of subject areas as well as conducting award winning research across health, energy and technology, and social policy topics.The library is spread over 7 floors including silent study rooms, group work and meeting spaces, computer labs and presentation facilities and a café as well as miles of bookshelves. Gustafs and LSA Projects supplied over 8,000 linear metres of ribs to the project for both wall and ceiling application covering around 450m2.Over 3,000 individual 28mm deep ribs in natural Oak veneer have been used to clad the impressive open atrium and cafe area as well as throughout the library isles and study spaces. 12mm gaps between ribs give the entire installation depth, texture, and warmth as well as impressive acoustic control; perfect for a busy university library!

Luxury countryside holiday letsAward winning architectural practice Pocknell Studio were tasked with renovating deteriorating, redundant, two-storey structures in addition to creating new field barns to create spectacular accommodation for a fabulous countryside holiday retreat.This architect has a long-standing preference for using Rainline for their projects so it was no surprise when the galvanised steel guttering and downpipes were specified for the North and South Barns. The Silver Metallic colour option was a perfect selection for the hipped roof design with black and white palette.The field bands are finished in a contemporary take on the traditional black Essex barn and designed to fit into a typical country environment. The brick and timber clad buildings are finished with not only Lindab Rainline rainwater system but also Lindab Seamline standing seam roofing system. The valley roof and staggered fascade design was a particular challenge which required careful detailing and installation to ensure steep falls which allow rapid drainage.Bullocks Farm have tried to create “a quiet haven for people visiting the area and have made each property as comfortable, relaxing and practical as possible”. The architects are very happy that the project has been successful for the client and further development of the site will continue.  

Caribbean Blinds have been an external shading expert since 1987. based in Sudbury provide from outdoor living to solar shading, exclusively designing and UK manufacturing luxury external shading systems.Helmsman manufactured, delivered and installed 22 two compartment heavy-duty laminate with camlock locker door. The specification of the locker is 1800 high, 300 wide and 450 deep, powder coated in black and with a laminate door colour of ‘Fenix Nero’.‘Fenix Nero’ is an aesthetic style of laminate, which has low light reflectivity with a matt surface. Additionally, it has a soft touch as well as being anti-fingerprint colour.On the laminated lockers the clients decided to have an oval laminate number plate with a key, making it easy for staff to use as they will be allocated a locker and a key to keep their personal belongings secure.The bespoke lockers were designed and manufactured at Helmsman. Some of the lockers were created to fit in alcove and were fitted with cladding and end panels in matching laminate to make the project look aesthetically pleasing.Get in touch today if you have a similar project, or want any more information on the products discussed, contact us today on 01284 530 427.

It can be difficult to find a lift that will operate outside without providing complete shelter from the elements. Full enclosures can have a significant impact on the building appearance and there may also be space constraints in lightwell situations. Penny Hydraulics Ltd uses design automation to quickly produce layouts based on its modular lift systems that can be adapted for external installation. The company has been manufacturing lifts in the UK for over 30 years and so has much experience to help find solutions that it knows will work well for the end user. Blueprint Studios in Manchester were experiencing problems moving audio equipment up to the first floor recording studio safely. It would have been very costly to fit internally both in terms of cost and space so a Penny Hydraulics MezzLift was installed externally within a minimal black frame and polycarbonate clad shaft to satisfy Listed Buildings consent. This saved considerable building works whilst enabling the Studios to become safer and more efficient. If the change in level is below 1.5 metres then a Loading Bay Lift could have been used that has much less impact over a more traditional style lift.

The Long Barn in East Sussex looks as if it has nestled in the Wealds for centuries. Owners and developers Max and Judi Erde had a mission to prove the viability of recreating vernacular architecture in a new sustainable modern living environment. With larch cladding (being more sustainable and easier to work than oak), and warmed via an air source heat pump, the home further features sustainable wall finishes, on the basis that those details contribute 7% of a building’s embodied carbon.Thus, Armourcoat’s innovative Clay Lime Plaster, which has low embodied carbon and produces zero emissions, has been applied throughout the two storey Wealdon style barn.The ethos behind The Long Barn was to mirror and replicate the historic aesthetic, but to utilise modern, sustainable solutions as far as possible to minimise its environmental impact. With its combination of natural minerals, longevity, eco- friendliness, ease of application and choice of finishes, I was more than happy to use Armourcoat’s Clay Lime Plaster. "The fact that we could choose different pigments and finishes to give colour and tone to the interior was an added bonus- I don’t need to decorate again!" Max Erde 

Expanding Exeter College's 700-year-old campus in the heart of Oxford was a privilege given to Alison Brooks Architects: developing Cohen Quad, a hub for students including living accommodation for 90, an auditorium, seminar rooms, social learning spaces, an archive, a café, roof terraces, offices, and fellows' accommodation.Student rooms and fellows' studies are enclosed by patterned stainless steel that folds across wall and roof surfaces, sitting on a stone-clad 'base' that houses the quads' public spaces.The Rimex tiling in the checkerboard pattern really highlights the stunning dormer windows and the beautiful curve of the tiles from the roofline wrap around the roof and down the walls creating a seamless cloak around the building. 17,000 iridescent stainless steel shingles adorn this roof, and the tiles are of a wonderful muted bronze and champagne colour with an unusual texture - catching - but not reflecting the sunlight. "We were given excellent technical and sales support from Fixfast. All stainless steel fixings and shingle clips were supplied in a timely and efficient manner. These factors contributed to Roles Broderick Roofing Ltd winning the NFRC Roofing Award for 2017"Ben Clark - Operations Director at Roles Broderick Roofing Ltd

Residential New Build apartment and spa area, consisting of 141 apartments.21 loft apartments required a design lead shower solution for which waterproof XPS round shaped floor shower elements, bathboards for tileable cladding of baths and XPS building boards were supplied in 12.5mm thickness for walls and 10mm thickness for floors.120 Apartments had XPS floor level shower elements featuring a drainage channel right next to the wall, a completely continuous slope right to the channel and more flexible adjustment for the channel. 12.5 & 10mm XPS building boards were used on walls and floors.This was the first installation that we know of in the UK where the boards in the shower area were fixed to the studwork solely by a versatile single component adhesive sealant (wedi 610), ensuring no penetrations through the boards. The special formulation is especially suited to waterproof butt joints of building boards, and has outstanding resistance to the elements; and to chemicals; and is also free of solvents, silicon and PCP.As an abP-approved system, the use of the adhesive sealant and XPS building boards reduces installation time by up to 50% because no further sealing is required, even in areas of high humidity.

Located at Swansea University’s Bay Campus, and designed and constructed by SPECIFIC Innovation and Knowledge Centre, the Active Office and Active Classroom are both designed to be energy positive buildings, capable of generating more solar energy than they consume during a typical annual cycle.The Swansea area of South Wales is synonymous with steelmaking as Tata Steel’s Port Talbot steelworks is just a few miles away from the Bay Campus. For this reason, SPECIFIC wanted to use steel as much as possible on these structures and so a Tata Steel wall and roof cladding system was chosen using Colorcoat Prisma® pre-finished steel, all made in Wales.The Active Classroom also feature Tata Steel’s Colorcoat Renew SC® transpired solar collectors, The system captures heat from the sun and draws it into the building through a microperforated collector on the exterior of the building. Heated fresh air from the cavity is then used as a pre-heater to the main heating system. A transpired solar collector can collect around 50% of the energy falling on its surface, which equates to approximately 500wp/m2 of the collector’s surface area and can deliver around 250KWH/m2per year or up to 50% of space heating requirements.

‘Elements of drama and delight’ Petrarch accents bring a sense of elegance and refinement… As the centrepiece of the magnificent £20 million Dylan Coastal Resort, the design brief for Milk Wood House Spa dictated the need for laid-back luxury. ‘Heralded by the luxury resort sector as ‘world-class,’ Milk Wood House Spa sets a new benchmark.’“We wanted to create a building that felt as though it was hewn out of the landscape, embracing and engaging with its setting. The design inspiration was both the immediate and distant setting on the edge of the River Taf Estuary.Lead architect and Associate Director of LP ArchitectsInspirational design “The building is contemporary and sleek, and we wanted the interior to feel seamless with the architectural design – so we worked closely with the architects and client to select the building cladding, which we then wrapped into the interior to unify with the exterior and enhance the connection to the outdoors.”Interior designer, Louise James of Blackthorn Design StudioWhy Petrarch? Created primarily from crushed marble Petrarch was a fitting choice in terms of the ecological ethos of the development. It’s lightweight nature and appealing aesthetic were also key reasons for its utilisation. https://www.prp-co.uk/what-we-do/architecture/milk-wood-house-499

Twice the height of any other building in Cyprus, the ONE Tower commands the skyline of Limassol. Sitting on the palm tree lined seafront close to both the city’s bustling business district and its quaint old town, the new development offers 83 luxurious residences, leisure and commercial opportunities set across 37 floors. Its award-winning curved design reminiscent of a yacht’s sail, stands at 170 m high which, coupled with its coastal location, presented a unique set of passive fire requirements for its facade. Key informationCompletion dateSummer 2020SectorResidential | Retail | LeisureEnd clientPafilia Property Developers Ltd.Main contractorArabian Construction Company (ACC) | JV Partners | Joannou & Paraskevaides Group (J&P Group)Facade contractorGlassline Industries LtdArchitectWKK ArchitectsDistribution PartnerDPS TechnoIndustrial Ltd Products usedSiderise RH Horizontal Cavity Barriers for Ventilated CladdingSiderise RVG Vertical Cavity Barrier (galvanised mild steel brackets)Siderise OSCI Open State Cassette Insert DesignThe sheer height of the tower meant it was vital to ensure the facade construction contained adequate passive fire protection, complying with local regulations and ensuring ongoing safety throughout the building’s lifetime. After working with our products and our Cypriot distribution partner DPS for a number of years, facade contractors Glassline specified a combination of open state Siderise cavity barriers and cassette inserts. The RV vertical and RH horizontal cavity barriers are designed to allow the facade system to maintain airflow and drain away any moisture within its construction but, in the event of a fire, rapidly close the ventilation gap to create an effective hot smoke and fire seal. Both products achieve Class A1 to EN 13501-1 and provide 120 minutes fire integrity. The barriers are complemented with the use of OSCI Cassette Inserts which are Class A2 rated. All these products have undergone rigorous third party testing to ensure dependable performance. These include single product tests and testing as part of a large-scale system, such as BS 8414 (1&2) and NFPA 285, demonstrating their performance within a complex, high-rise cladding system such as that used on the ONE Tower. For more detail about the standards the products meet, please visit the individual technical data pages. In addition to providing straightforward passive fire protection, the stonewall lamella core of the RVG vertical cavity barriers allows them to accommodate the natural movement associated with rainscreen facades. This is especially important on this exposed seafront project. It is also for this reason that the cavity barrier brackets were specified in robust galvanised steel, protecting them from corrosion caused by the sea air.InstallationAll Siderise products are designed to be easily installed— a key benefit on this large-scale project, enabling it to be finished to a high standard without compromising the project timeline. The RV vertical barriers and then the RH horizontal barriers were cut to the correct size and installed by Glassline using Siderise galvanised steel brackets and foil tape. Where the two products met, they were simply tightly abutted, and the joints sealed with foil tape to ensure continuity of intumescence and therefore fire protection. The OSCI cassette inserts were then fitted as part of the cladding system, installed directly behind the cassette panels and in parallel and centrally aligned to the RVG and RH cavity barriers. This helped to simplify detailing and ensure the ventilation gap met the project requirements. Technical support and site services were provided by our partner DPS throughout the design and installation process, in-keeping with the Siderise ethos of standing by the side of our customers to deliver optimum results.Final CommentsCreated in collaboration with a number of renowned international and local firms and suppliers, ONE Limassol Tower not only stands as a symbol of the city’s exciting future, but also of what can be achieved when diverse skills, expertise and vision are brought together. The selection of tested Siderise products chosen for the project will help to ensure that the building remains a safe and beautiful home and landmark for the people of Limassol for many years to come.Image copyright (C) Pafilia www.pafilia.com 

The Palm Tower, a new landmark from master developer Nakheel, under construction at the heart of Dubai's iconic Palm Jumeirah, promises that each of its luxury hotel rooms and apartments will feature one of the best views in the city.To achieve this, the 52-storey, 240-metre-tall hotel and residential building will be clad entirely in glass.Of course, Dubai’s climate means that preventing excessive heat build-up inside heavily glazed buildings will always be a priority. For this project, the architect chose to install 50,000 square metres of Pilkington Suncool™ One 30/21 solar control glass so that residents and guests enjoy both stunning vistas in cool, comfortable surroundings.Silver liningThe glass features a state-of-the-art multi-layer coating that incorporates a microscopically thin layer of silver to help reduce heat transmission to just 21 per cent, while maintaining a neutral colour balance in the light passing through, maximising the views.The building is clad in an area of glass equivalent to 192 tennis courts, but because of the advanced magnetron sputtering technique used to apply the coating, just eight kilogrammes of silver was needed to cover the whole tower. That’s a piece of silver approximately the size of a laptop.Pilkington Suncool™ One 30/21 was originally developed by Pilkington United Kingdom Limited, part of the NSG Group, for Intraco UAE, which has used the glass on a number of projects in the past.Leo Pyrah, product manager at Pilkington UK said: “The view you will get from these hotel rooms and apartments is one of the major draws of this building, but clearly a fully glazed skyscraper in such a hot climate creates challenges from an energy management perspective.“The bespoke coating we have developed alongside Intraco lets the developer and its customers enjoy the best of both worlds – a stunning view with much reduced solar heating.”CentrepieceAs the centrepiece of the world-famous Palm Jumeirah, The Palm Tower is set to become a new landmark for Dubai. When completed, the mixed-use complex will feature 432 apartments and 290 hotel rooms, as well as a rooftop dining and recreation destination featuring a 360-degree roof top infinity pool, a high-end restaurant and a public viewing deck offering sweeping views of The Palm, the Arabian Gulf and the Dubai skyline.As well as creating a comfortable climate for users, the solar-control glazing will also significantly reduce the need for air conditioning, reducing costs and emissions.Leo Pyrah continued: “Dubai is a city that is pushing architectural and technological boundaries and we’re excited to have played a role in shaping the look of its iconic and ever-evolving skyline.”Project: Palm Tower, DubaiClient: NakheelGlazing distributor: Intraco UAE

Optima FC+ in 3.0mm Aluminium PPC Interpon D2525 Y2217f has been used in the completion of Lancaster Universtiy's School of Mathematics.Optima FC+ was specified in order to create the feature `Zig-Zag` pattern. The expert team at Sotech manufactured multiple panel depths, engaging with carrier rails set to irregular angles to create the architect’s vision.The four story building included a rooftop terraced area for students to relax and study, has a unique and iconic look, making it an immediate landmark for people travelling into Preston City Centre. Lancaster University School of Mathematics (LUSoM) is a specialist school that will deliver world-class mathematics education for 16 to 18 year-olds.Optima FC+ is an evolution of Sotech’s original secret fix hook on rainsreen. Featuring an innovative slide and lock adjustment mechanism, the rainscreen system now features carrier rail hooks, which can be locked in position on site by installers, rather than in the factory, leading to significantly reduced lead times for all parties. Its versatility is such that a multitude of materials and thicknesses (from 2.0mm to 4mm) used on one universal carrier.Optima FC+ has been fire tested to BS8414-2:2015, and classified to BR135 for high rise buildings. A full range of Euroclass A1 and A2 – s1,d0 panel materials from 2mm – 4mm are available. Mechanical fixing methods and no use of adhesives, providing true A1 and A2 cladding systems.TESTIMONIALSJamie Brown, Estimator at Sotech, noted: “This was an extremely difficult layout to accommodate onsite. Early-stage discussions ensured that all queries were actioned before the design commenced to ensure a streamline process of transferring information. The team at Saxon Contracting have done a fantastic job in bringing the concept to life!”Naveen Sandhu, UK and Ireland Specification Manager: “A distinct tapered cladding design needed to be complemented with a finish equally befitting it. The Pozzoni team wanted to replicate the look and feel of anodised aluminium but without the associated practical pains. They identified our D2525 Anodic Collection as the perfect solution, proposing a sleek metallic bronze finish, offering strong depth and naturality to the aluminium surface. D2525 Anodic boasts a strong track record in decorating a wide array of higher education establishments which instilled future confidence with the end client.”Lee Banks, Design Manager at Saxon Contracting: “The secret fix panels on this project needed to be completely bespoke to the Optima FC+ standard details, working with the Sotech team they highlighted any production issues early in the design which avoided any un-necessary re-design work or unsightly site fixes. The complexity in the setting out and the majority of time taken building this project is hidden behind the panels with the support bracketry so the site team deserve a special mention for their expertise.”

A careful combination of A2 fire rated soffit panels, rainscreen cladding and mesh screens from Proteus Facades has helped band together the impressive new £42m Sciences Centre at Durham University. Based within the grounds of the Upper Mountjoy Campus, the new Mathematical Sciences and Computer Science building has been developed to create synergy between the two departments, which have been earmarked for significant growth within the Durham University Strategy – 2017-2027. The building features state-of-the-art teaching facilities and office space, including a specialist IT Lab with a designated server room, a 120-seat tiered lecture theatre and tutorial rooms. While a café and breakout spaces, as well as four enclosed courtyards make up the communal areas. Creating a bright space for students, staff and visitors to meet and relax, Proteus Facades manufactured striking 2.0mm Aluminium Proteus IP interlocking planks with a PPC Traffic White Matte (RAL 9016) finish for use on the façades of the four internal courtyards. GSS Architecture chose the Proteus IP aluminium PPC in Traffic White because it accentuates and reflects natural light creating an enhanced ambience in the teaching spaces that face onto the courtyards, whilst complementing the glass curtain walling system.

TG Escapes designed and built an early years eco-building for their client Colston’s Lower School in Bristol. The building was tailored to the school’s needs, providing a separate learning space to house all the early years' students in one building. When designing any environment for young children, safety is a priority. That is why TG Escapes chose non-slip decking to surround the new school building. Gripsure met TG Escapes' rigorous non-slip requirements on this project with brown-treated Gripsure Classic, featuring three anti-slip strips. This is the first project regular Gripsure customer TG Escapes has completed in a brown-treated decking. They chose this finish to complement the Western Red Cedar cladding used on the eco-building. It is also the first project for which TG Escapes has used three-strip non-slip decking to further reduce the risk of slips and falls. A representative for TG Escapes explained “In early years buildings some of the children are of nursery age. Their feet may be so small that they would fit in between the space of two anti-slip infills, and be offered no coverage at all. Having three anti-slips eliminated this risk.” With a PTV value of 100, Classic allows access all year round offering peace of mind.

The ChallengePark View is a residential development of 175 units, including one and two-bedroomed apartments and three, four and five-bedroomed homes. The site sits alongside Saltwell Park, one of Britain’s finest Victorian parks. A conservation area, the design of the site sought to blend tradition with a modern urban feel.The local council required a premium finish for which the choice of brick would play an important part in achieving.The SolutionAfter reviewing several options, Forterra’s Southdown Multi from its Butterley brand range was chosen. It is a high-quality facing brick with a tumbled texture.For some plots on the site, the bricks were laid in an English Garden Wall bond, closely reflecting the brickwork of some of Saltwell Park’s buildings.Alongside modern features, such as rainscreen cladding projections and timber finishes, the development also includes a number of bespoke elements appropriate to the conservation area: reduced window reveals, timber doors and windows coloured in a modern dark grey, natural slate roof tiles, exaggerated roof pitches to accentuate prominent plots and full height feature windows.The BenefitsThe use of Southdown Multi brick has proven to be an effective choice in the successful blending of traditional and modern, ensuring the new development quickly settled within its surrounding environment.

'The Portal' is a new £16 million public services hub in Ellesmere Port, delivered by Vinci Construction UK for Cheshire West and Chester Council. The new facility will be home to more than 500 council and public sector staff, a Job Centre Plus and a Citizen’s Advice Bureau.The building has been constructed with many environmentally friendly elements including solar panels, air source heat pump and electric vehicle charging points. The Portal’s envelope is wrapped at the top and bottom with an attractive, copper coloured metal cladding and a newly formed public realm area will surround the exterior, with bench seating and green landscaped sections.Internally, 'The Portal' consists of large open plan working areas with smaller subsection meeting rooms, break out and kitchen spaces which are present on each level and a main central staircase for circulation.Metal Technology Ltd supplied its 10-35Hi+ commercial entrance doors and System 17 capped curtain walling for the large, glazed sections of the build to approved fabricator and installer RED Systems Limited.Due to open its doors in Spring, it’s fantastic to have been involved in this state-of-the-art, commercial project, which is a catalyst for the wider Ellesmere Port Town Centre regeneration master plan.

An intelligent Advanced Go panel has been installed in The Steading, the home of sculptor and furniture maker, Tim Stead MBE.The Steading is an A-Listed building, located in Blainslie near Lauder in the Scottish Borders, and was both the creative centre and home to the Stead family across several decades. It was purchased by the Tim Stead Trust in 2021 and a programme of restoration work has included the addition of an Advanced Go new-generation, single-loop fire alarm control panel to protect this historic home.The Steading is considered Tim’s masterpiece with an interior that was transformed over many years. The interior is completely clad in sculpted wood: floors, walls, ceilings, stairs, cupboards, beds, a grandfather clock, sink, conservatory, hanging sculptures, desks and so on – all made by Stead himself. This exceptional building now aims to become a hub for practical expertise in everything to do with wood and the environment, hosting a variety of day and residential courses in the unique environment of The Steading.Fire and security service providers, Safe Services, installed the Advanced Go fire alarm panel in The Steading and were involved from the design stage though to installation and commissioning. The Advanced Go panel is integrated with EMS Firecell radio equipment for a complete cable-free fire system – which was an essential requirement to preserve and protect the unique interior of the building.

THE LOCATIONThis brand-new student accommodation development is situated in the River Street neighbourhood of Manchester. The striking appearance of the development is down to the architectural design and materials used including the Cor-Ten steel alloy cladding which pairs perfectly with the dark blue painted panels.THE PROJECTThe development comprises 792 student bed spaces including a mix of studios and apartments and offers affordable, stylish, and accessible accommodation in the heart of Manchester whilst being a safe environment for students to learn, grow and live.THE PRODUCTSafety Letterbox discussed the design, layout and fire specifications of the project. After a few options were presented the client chose our FR2 mailbox. The FR2 mailbox is horizontal in front/ out front 2-hour fire-rated (integrity only) mailbox.Our 2-hour fire-rated mailbox range is commonly used within an evacuation route as they are capable of holding backfire or containing a fire for at least 2 hours, satisfying building and fire regulations.The mailboxes we’re powder coated in special colour – MATT Pearl Gold (RAL 1036) giving the mailboxes a stunning high-end aesthetic finish whilst being practical and completely secure. Multiple keys were also supplied, and doors were engraved for easy identification

A selection of our high-performance aluminium fenestration solutions has been used for this new café and drive-thru at a popular shopping destination in Wales.The new Starbucks at Parc Pemberton Retail Park has been designed by G1 Architects and built by Trojan Construction, with the aluminium fenestration package skilfully delivered by specialist contractor Sherwood Aluminium Systems.The project features both our cost-effective SCW aluminium curtain walling and our robust SFG shop front glazing system, which are both ideally suited for use in the retail sector as they combine slim sightlines with a robust and durable construction. Our curtain wall system has been used to create a bright and airy interior in the café, and the SFG system has been integrated with our SD aluminium doors to provide safe access at the entrance and exit. Our SD aluminium commercial doors have also been used on the drive-thru building, with the powder-coated aluminium frames perfectly complementing the use of timber cladding and grey façade design.The new Starbucks outlet has benefited from both Trojan Construction and Sherwood Aluminium Systems’ extensive experience undertaking similar schemes for the retailer across the UK, with Sherwood Aluminium Systems named as a preferred supplier for Starbucks.

Located near Highgate in North London, the Chester Balmore project consists of three elegant brick-clad blocks, housing a contemporary collection of 53 super-insulated one, two and three-bedroom flats, all set around a landscaped courtyard. The development is designed to achieve Code for Sustainable Homes Level 4 and the high levels of insulation employ good use of solar and internal heat gains, plus excellent air tightness and minimal thermal bridges. It is claimed that the air tightness on the Chester Balmore development is around twenty times better than that required by Building Regulations.Preventing thermal bridging along the parapets was a critical consideration for such a high performance development, because as with balconies, parapets can allow conductive materials to transfer energy through the thermal barrier. Conventionally, in the majority of cases, the method of insulating parapets and parapet walls is to wrap the perimeter of the wall with an insulation barrier. However, the Schöck Isokorb® T type A offers a cost-effective and more thermally efficient alternative. Its 60mm insulation thickness results in low psi-values and therefore significantly reduces heat loss – and there is no wrapping required. It offers a more sophisticated construction opportunity for greater freedom of design and offers flexible distance between elements according to load requirements.

It is anticipated that when completed in the next ten years or so, the regeneration of Wembley Park, in North West London, will provide up to 7000 new homes. Schöck is supplying its Isokorb structural thermal break systems across a number of different sites on this vast scheme, but one of the largest is South West Lands. This private rented sector residential-led mixed-use neighbourhood will account for around 12% of the new homes on the entire Wembley Park development, up to 900 in total.South West Lands is spread across four separate blocks, which all share a communal basement car park.The reinforced concrete frame buildings, up to 18 storeys high, are finished using traditional brickwork and standing seam metal cladding. To create valuable amenity space at higher levels, as well as offering far-reaching views across London, there are communal roof terraces and a considerable number of private balconies throughout the development.Schöck Isokorb® T type SK products were used on two of the phases at South West Lands for thermally connecting the cantilevered steel balconies to the reinforced concrete slab. The Isokorb® T type SK units were positioned accurately using re-useable balcony width steel jigs.

A £40 million investment, 13 roof areas, eight different roof levels, and a steady stream of visiting students to keep happy throughout – the University of Reading (UoR) Library’s complete refurbishment was a large and challenging project spanning three years.Originally opened in 1964 and later extended in 1985, the library’s internal and external revamp was designed to increase space, improve facilities for individual study, provide better access and security across the building, and improve energy efficiency.In addition to a new-build Café extension, a new entrance canopy, a new ground-to-roof level lift and stair core extension – each featuring a new flat roof area – there were also 10 existing flat roof areas refurbished, coupled with the replacement of windows and re-cladding of the building’s exterior.Following a competitive tender based on an outline specification, Owlsworth Roofing, Sika Sarnafil single ply flat roofing specialists, impressed with the level of detail included in their quote and were awarded the contract by main contractor ISG.Roofing:Sika® Sarnafil G410-12 ELF.Sika® Sarnafi G410-12 EL.Sarnavap®-5000E SA.Sarnavap® HD SA.Primer 600.Sikatherm® PIR Insulation and Sarnacol®-2162.

Architects: Woods BagotLocation: Wiltshire, UKPhotography: Will PryceMaterial: NATURSOFFIT-W CladdingFinish: RustikThe project by the Woods Bagot architecture studio for the library at St. Mary’s Calne School re-centres the space as the hub of academic and social activity. Completed in 2020 and located in the British county of Wiltshire, the project maintains the school’s traditional aesthetic, all while incorporating a central garden with apple trees.The library’s faceted ceiling is a central part of the design, which evokes spreading tree branches. All of the wood panels are held up by an iron truss structure connected to large pillars, simulating the vertical nature of trunks. The properties of Parklex Prodema’s false ceiling allow continuity for the wood from the interior to the exterior, making it visible through the clerestory windows.The triangular panels that make up the complex faceted geometry are resistant, long-lasting, sustainable, and maintenance-free. They were custom manufactured for this project, including perforations for acoustic purposes, allowing sound to pass through the panel to be absorbed by the insulation behind it.The natural Okume wood panel selected by the architects provides a warm, welcoming atmosphere, creating a point of inspiration for learning. Combined with the garden landscape around it, the continuous ceiling magnifies the building’s appeal and integrates it into his surroundings.

Our client, One 17 Design, acted as Architects, Interior Designers and Project Managers for this superb project with involvement from inception through to completion. Their brief was to create a home office / garden room in the grounds of an existing detached home, which was done by extending the detached garage.The material palette for the garden room predominately featured oak and steel. Blackened oak cabinetry and steel fenestration provide a striking contrast against the natural oak frame and cladding. Clever detailing in the relationship between the oak frame and steel doors adds a contemporary twist. The bricks for the outside of the building were selected to match the brickwork of the existing bungalow. Bespoke Clement steel windows and doors from the W20 range were chosen for the project, including an interior door, fitted with reeded glass that leads to the bathroom. All handles were powder coated black to match the steel frames.The project won “Best amazing space” at the 2022 Northern Design Awards.Freddie Garside, Partner and Director at One 17 Design, said:“We and our client were delighted with the finished doors and screens. The narrow framed black steel doors complement the natural oak frame perfectly. Clement were very professional, efficient and responsive throughout the whole project.”Photography: Joe Cotterill

Artform Urban supplied multi-use planter benches to one of the largest retail destinations in the UK, the Metrocentre, attracting millions of visitors each year. As part of ongoing efforts to revitalise the centre and create an inviting atmosphere, Artform Urban Furniture proposed the installation of their Triangle Planter System in key public spaces.The Triangle Planter System combines modern aesthetics with functionality.Each planter is constructed from durable powder-coated steel with integrated seating which is clad in Okoume sheets, an attractive and hard-wearing plywood perfect for busy environments.The triangular shape allows for flexible placement to create an array of configurations, optimising the use of available space. They act as natural barriers, guiding foot traffic and improving the overall flow within the Metrocentre. The planters were strategically placed in high-footfall areas, including entrances, walkways, and plazas. Their design has helped to define and delineate pedestrian walkways, seating areas, and open spaces as well as enhancing the overall ambiance of the Metrocentre. The Triangle bench is part of the INSIDE + OUTSIDE range which aims to provide versatile and aesthetically appealing furniture solutions for both interior and exterior spaces. This range combines functionality, durability, and style to enhance various environments such as public spaces, commercial areas, and residential settings. 

The owner of this house wanted to build a purpose-built home to meet the needs of his growing up family.  He wanted to live in the village he grew up in but at the same time it was important that the design embraced new concepts and ideas. The end result is a stunning contemporary luxury home that incorporates large glazing areas throughout. There has been a careful use of traditional stone, wood and also unique metal cladding detail with the external design. Internally the feeling throughout is minimalistic clean lines, with the furniture being a perfect complement to the end result. With the exception of the switchable privacy glass for the window adjacent to the front door, the inclusion of completely concealed fully automated blinds to all other windows are the ’Grand Finale’ to this beautiful home.  When not required the blinds are completely concealed but at the press of a button or using their mobile devices, blinds appear as required – providing shading, sun protection, privacy or blackout blinds as required.A feature of interest is the large gable window in the master bedroom.  Here Honeycell Duette® blinds have also been concealed within the sloping ceiling and again appear from their hiding places when required showing that irregular shaped areas can benefit from the Blindspace headboxes which can be made to conceal almost any blind available on the market.

In a stunning architectural statement, CUPA PIZARRAS R17 slate has been specified to meet the design challenges of a former Georgian windmill renovation at Fort Green, near Aldeburgh in Suffolk. The first project of its kind in the UK, the natural slate was individually cut and fixed through expert craftsmanship to accommodate the building’s exterior curve while also providing crucial protection from the harsh coastal environment. Originally, the windmill walls were going to be clad in cedar shingles however, contractor ELC Roofing recommended using the rectangular CUPA R17 slate from CUPA PIZARRAS as a more weather-resistant alternative. ELC Roofing Owner, Edward Carlo, explains: “The R17 is a natural, non-carbonated blue-black slate with non-rusting metallic particles and thin laminations. From our perspective, it’s a tried and tested product that we specify and install on a lot of our projects – especially in coastal situations like this.” The slates, which protect against the salt water and wind, have been fitted on both the windmill’s curved wall, its pitched roof and elsewhere adding design details to the property’s walls. He goes on to say: “Aesthetically, the ocean environment has inspired the material choice with the slate mirroring the scales of a fish. This gives the windmill a dramatic architectural style; one that also sympathetically ties into the slate roof of the neighbouring cottage, which we replaced with CUPA R17 the previous year. “As far as I am aware, nothing like this windmill has been done in the UK. It was a case of starting from scratch to devise the optimum installation method, which involved a lot of detailed calculations.” For the tower, which has a 15m circumference at the base tapering to 11m at the top, the team initially removed the thick render on the windmill wall, taking it back to the original brickwork. Next, to meet the challenge of the curve and tapering of the wall, 50mm counter battens were fitted to the tower’s brickwork. Then, multiple strips of ply were cut and glued together to create the curve. These panels were screwed to the counter battens to provide an anchor for the fixing system. The ply was also primed to protect the surface from water ingress and a breathable membrane applied to protect the brickwork. In terms of fixing the slates to the panels, Edward said: “For a more corrosion and wind-resistant solution, I decided on the French technique of a stainless steel hook fixing system to install the slate, as opposed to nails.” Ensuring the layout worked exactly with the curves, the slate was lasered from top to bottom to perk it out, which took five days to do. Horizontal tiling battens were also marked to ensure the slates were fixed at the right height. Every single slate was cut and fixed individually to accommodate the curve and ensure they aligned with the building’s inset windows as well as other architectural details - a very precise process that required expert levels of craftsmanship. Preventing the slates from getting smaller at height, the team designed-in a series of lead bands that go all around the building at each storey level. These sit underneath the windows to create a consistent appearance visually. The windmill’s domed copper roof existed already and the adjoining tower, which is horizontally clad in a white weatherboard, features a slated pitched roof. ELC Roofing has again used CUPA PIZARRAS spanish slates. In this instance, the roof curves to the back end with four leaded hips to one end and two to the other with a connecting lead ridge. This time the slates were fitted to 20 x 50mm battens with a layer of permeable membrane. This part of the roof also features a striking onion-shaped finial. Expertly crafted by ELC Roofing, the finial is produced out of a patchwork of small pieces of soft copper, topped off with a fish that acts as a weather vane and includes stunning marble eyes. To the other side of the clad tower, CUPA PIZARRAS slate has been used to create a vertical square panel detail to the front of the building and fixed using the hook system again. Commenting on this challenging project, Edward said: “Work on site started before the first Covid-19 lockdown so as well as the challenging weather conditions that a coastal location like this presents, the team also had to complete the work with government guidance and restrictions in place. Regardless, the client is overwhelmed with the end result and so are we.” To find out more about the CUPA PIZARRAS range of natural slate visit: https://www.cupapizarras.com/uk/natural-slate-roofing/