"ceiling finishes"
5,544 results found
Relevance
Showing 109-144 of 755
Powder coating replaces Corten to achieve a harmonious finish in an iconic location
Powdertech (Corby) Ltd
Iona Abbey on the Hebridean island of Iona has undergone a significant refurbishment including installation of galvanized steel canopies over the entrance to the refectory based on the symbol of wild geese. Mild steel perforated panels were used for the internal mezzanine balcony frontage in the refectory and the lift surround. The finish chosen for all metalwork was Evolution™- Diamond Mine, reflecting the natural rusting of steel. A high-performance duplex corrosion protection system for external metalwork with an authentic aged, weathered look without any staining of external stonework, together with less exposed internal metalwork, it achieved a harmonious finish throughout.
cGMP Global Packing Centre for AstraZeneca
Norwood Group Limited
PROJECT OVERVIEWThe project comprised the design, manufacture, supply and installation of a new 8000m2 footprint of a highly specified Packing Facility. The brief was to provide nine GMP Grade D packing cells, each of which required strict temperature, humidity and pressure control to enable primary packing of pharmaceuticals in a clean environment with no risk of contamination. Each of these Primary Packing cells connects to a common, secondary packing area. OUR SCOPE OF WORK To meet the project specification and environmental requirements, Norwood proposed our 100mm Mediline Partition. Following a rigorous selection process, our solution was a preferred option over four alternative systems. Working closely with the client’s team and the main contractor, we designed and developed bespoke solutions such as Flush Coving, Fire Rated Vision Panels, Bulkheads and Half Height partitioning. Cleanability has been ensured through the hygienic finish of the partition panels and, in particular, by incorporating recessed radiused coving at ceiling to wall joints providing a smooth clean finish throughout the room. Our innovative acoustic ceiling combines hygienic, wipeable, sound absorbing materials and cleanroom grade panels which not only reduce environmental noise levels but also provide cleanable airtight surfaces. Within the open plan secondary area, partial height glazed partitioning was employed. The facility was built with future adaptability in mind and the possibility of increasing the cleanrooms to Grade C, therefore the Norwood Flush Coving was utilised in the spinal corridor and primary cells. Supplying over 7000m2 of ceilings and 6000m2 of partitioning, this was one of Norwood’s largest projects, delivered to an extremely challenging programme.
Absorb-R GypLine αw at SOAS, University of London
Soundis
A high specification sound absorption solution...GRAHAM Construction were appointed to lead the refurbishment of Senate House, part of the University of London which is to house the School of Oriental & African Studies. SOAS is the world’s leading institution for languages, cultures and societies of Asia, Africa and the Middle East.The plan is to improve the student experience significantly by offering state-of-the-art facilities, with a high specification sound absorption solution for reverberation control in the Teaching Rooms, Seminar Rooms, Meeting Halls, Study Units and Lecture Theatres.Increased sound absorption helps to improve speech transmission quality, sometimes as much as 35%, control echo as well as background noise and reduce reverberation times in teaching areas.The SOAS project will accommodate a 25% planned increase of the cosmopolitan student numbers, with staff and students together on one centrally located campus, so reverberation control is paramount in this instance.We have undertaken the supply & installation of 2,650 sq metres of the Absorb-R GypLine αw Acoustic Plaster along site our installation partner UK Acoustics. The Absorb-R GypLine αw system includes 25mm and 39mm Acoustical Absorption Boards which can be fitted direct to soffit, to a shallow narrow void track-line carrier ceiling or a deep void MF Ceiling Grid. The boards are then sanded and treated with a 3mm acoustic spray plaster with a choice of finishes. The Absorb-R GypLine αw System finishes can then be colour coated to any RAL top coat colour and provides a virtually seamless monolithic ceiling with high and exceptional sound absorption levels that meet or exceed typical reverberation criteria.
student accommodation finished in colourful structure bonded® carpet tiles
Burmatex Ltd
burmatex® structure bonded carpet tiles include the three ranges of lateral®, zip and code – each available in 18 corresponding colour ways.
This university accommodation building has used all three coordinated ranges, shifting to a different colour focus on each floor. Feature walls and furnishings also follow the changing colours, to create bright, engaging finishes.
lateral®, zip and code are suitable for heavy commercial use (class 33) and rated BREEAM A/A+.
Landmark Place - Perfect Edge Finishing for a Prestigious Residential Development
Schlüter-Systems Ltd
Schlüter-Systems provided a variety of trims and movement joints to ensure a damage-free finish for the tiled walls and floors of high-end residential project, Landmark Place.
The 280,193sq ft Barratt Homes development has an enviable position on the north bank of the River Thames, near the iconic Tower Bridge, and boasts 165 one-bed suites, one, two and three bed apartments and penthouses across 10 storeys. It replaces Sugar Quay, a 1970s office building built for Tate and Lyle, which was purchased by CPC Group back in 2012.
A clear gloss finish outdoors with new Sadolin Yacht Varnish
Sadolin, product of Crown Paints Ltd
Specifiers looking for a high quality gloss exterior varnish with a true clear finish can lift the lid on a new launch from the superior woodcare brand Sadolin.
Sadolin Yacht Varnish has been developed in response to customer demand for a clear, traditional, high gloss varnish for use outdoors on windows, doors and conservatories.
The product is ideal for use on new wood and previously coated surfaces, with a translucent finish which maintains the natural colour of the wood.
A Traditional Brick Finish for an Offsite MMC Development
FastClad
It is hard to believe that this charming assisted living development for Northampton Partnership Homes is a prefabricated, pre-clad, panelised factory manufactured project.Designed by Maber Architects and manufactured by Accord's LoCal Homes business, this project demonstrates that prefabricated doesn't have to mean that aesthetics are compromised. Utilising both faces of the Wienerberger New Red Multi Gilt Stock brick, FastClad's factory bonded brick cladding system was by far the most natural brick façade without having to resort to a traditional brick skin.
Knauf Airless Finish specified for luxury North London Care Home Development
Knauf UK
To ensure residents in this new luxury North London care home would feel entirely comfortable, the most efficient and futureproof materials were chosen. That’s why main contractor Wates specified Knauf Airless Finish for use throughout the development of the new Signature Care Home in Barnet.
Pickle Factory
LSA Projects Ltd
150m2 of Oranit Shiluvit panels in Poplar were used to clad the walls and ceiling of the multi-use event space, the Pickle Factory in East London.Part of the larger Oval Space group, the pickle factory is an ex-industrial unit in Tower Hamlets designed for more intimate live music and acoustic events and has hosted corporate events for companies including Google, Forza, and Joypad.The natural finish Poplar timber Shiluvit panels are also in keeping with the versatility of the space.
Resuflor and Resupen WB provide smooth dark floor finish for the Richard III Exhibition in Leicester
Sherwin-Williams
The flooring requirement at this museum in Leicester stipulated a safe and cleanable seamless finish to exhibit the discovery of Richard III's remains and the story behind the Battle of Bosworth. A simple black finish was specified in keeping with the design of this facility. The exhibition takes visitors through the history of the Wars of The Roses and then fast forwards 500 years to a Leicester car park where a discovery was made. Resuflor self smoother was installed at 3mm thickness across the floors and this was sealed Resupen WB Satin Black to give the desired sheen finish.
Using Specialist Wood Finishing Products to create a Unique Wood Floor
The Solid Wood Flooring Company
This case study shows the different affects you can get by using professional timber treatments. Our experts can help you choose your perfect bespoke finish and colour to match your interior décor. This is a specialist area and only professional fitters with finishing experience on site should be used. Some of the treatments require pre-treatment to change the tannins in the wood which will require buffing with a white pad before applying a top coat. Others are the latest lacquers that can be easily applied on site.
SonaSpray K-13 in dMFK Architects HQ offices
Oscar Acoustics
Architectural practice, dMFK, attract staff back to the office with Oscar Acoustics market-leading SonaSpray acoustic ceiling spray.In 2022, award-winning architectural practice dMFK, in collaboration with architects Sher + White, embarked on refurbishing dMFK’s HQ in Fitzrovia, London, to create a collaborative space for its workforce. They enlisted Oscar Acoustics to help create an acoustically balanced environment which would also work with the aesthetics of the interior space.SonaSpray K-13 was applied in a stunning pale grey colourway to the ceilings of the areas with the greatest potential for excess noise – the communal areas, large meeting rooms, and co-working spaces.On the finished project, De Metz commented: “We’re thrilled with how the office looks and performs. Oscar Acoustic’s SonaSpray is the single most noticeable and effective material in our office and directly contributes to day-to-day comfort and the ability to work without bothering others.”
Orchard Brae School
LSA Projects Ltd
Architect: JM ArchitectsInstaller: Profile Projects LtdProduct: ‘Shiluvit’ by Oranit500m2 of Shuluvit panels in 7-601 format in A-9-1 (Oak) stained Yellow Pine were installed to the ceiling of the swimming pool area at Orchard Brae Complex Needs School near Aberdeen.The Shiluvit panels are a stunning feature of the swimming pool area in addition to providing acoustic dampening to the bright and open space; the panels were also finished with a humidity resistant lacquer to protect the ceiling against the damp environment and ensure quality and stability for the life cycle of the product.In addition to education facilities for up to 150 pupils the brand new £18.5m Centre of Excellence, the campus is a community hub for families, groups, and charities working with children and adults with additional support needs; the facility houses sensory rooms, working gardens, specialist home economics teaching spaces, and play facilities as well as being a base for local outreach speech and language services.
Durlum Polylam at The Sands
LSA Projects Ltd
The Sands - Durham WaterfrontArchitect: Ryder Architecture LtdInstaller: Pennine ContractsProduct: Durlum Polylam BafflesLSA Projects supplied over 300 linear metres of Durlum Polylam baffles to the new facility The Sands on Durham Waterfront in the city centre. The new riverside development was intended to move the County Council headquarters into the city centre for improved public transport connections for staff and other visitors.In 2022 the building applied for change of use planning to convert the landmark building into additional learning spaces for Durham University Business School. The change of use allows the department of the Russell Group university to move straight into the ready-made facility after delays with their original plans for a different site.The £50m facility has space for the 2,300 students and members of staff at the business school across the 1.4 hectare site. In addition to traditional learning spaces the building has modern working space for staff and academics and hopes to attract leading businesses to work with the university and graduates.Durlum Polylam baffles were used for the feature ceiling in the main event space. The ceiling is made up of 320mm deep 100mm wide baffles in concentric squares with the outer square measuring an impressive 20 metres across. Polylam pieces were finished in a Dur-Graphic faux Cherry veneer print and mounted in 9 double-row rings with alternating strip lighting and integrated ventilation systems.Polylam from Durlum is a versatile ceiling system made up of vertical baffles available in a range of sizes up to 100mm wide by 800mm deep. Pieces can be installed using suspension grid systems available from Durlum in a variety of ways including independent mounting and group mounting with regular spacing and options for demount-ability.Baffles are made from either galvanised sheet steel or aluminium and finished in a choice of RAL colour powdercoating as a standard with options for gloss and metallic finishes as well as Dur-Graphic and Duroplan printed designs. Acoustic perforations can also be applied to the baffles as well as incorporating Dur-Sonic acoustic mineral wool filling to the inside of the hollow baffle lengths.
White Board & Acoustic Panel Finish MG100 Operable Wall
ModernGlide Ltd
We designed and installed 3 of our MG100 movable acoustic walls to a project in London to create flexible working spaces for our client. Their chosen panel finish included a magnetic wipe board along with our PanelHush PET acoustic wall panels. The PET panels help reduce the room echo/reverberation which gives a better working environment. PanelHush PET range is a 100% recyclable acoustic panel that is manufactured from recycled PET bottles. Weuse 65% post-consumer recycled fibres and our products are 100% recyclable.The PET panels come in 12mm or 24mm thick sheets with a choice of 14 different colours to match your design need The installation of our MG100 movable acoustic wall panels gives an element of flexibility which is suddenly added to your space. Therefore, the environment can quickly be manipulated to cater for any of your flexible space needs. Whether that be for meetings or a little bit of privacy. Our MG100 Series also has a strong fire rating of up to 1 hour. We believe that not only should our products look sleek and provide a practical option, but most importantly, they should be able to be called upon in times of emergency.
Guy Nelson Hall
Knauf Ceiling Solutions Limited
Knauf integral in Warwick Hall development.The Knauf team has played a significant role in the specification and design process during recent construction at one of the oldest schools in England, working alongside award winning Associated Architects to produce a masterclass in acoustic performance.The site consisted of an existing hall, which was used for assemblies, performances and functions. This hall was built in the 1960s and suffered from a series of failings which impacted its flexibility and usefulness.The proposal for the Warwick Hall was an opportunity to build a physical embodiment of Warwick School’s academic excellence, prosperity and ambition, which saw the existing school hall stripped back to its structural frame and heavily modified to provide a state-of-the-art, revitalised and flexible school hall with a large double height entrance foyer, two performance studios and other ancillary spaces. The brief was given to the team at Associated Architects and they quickly relied on the quality of materials and service provided by Knauf.
Calibre, Warrington
Be-Plas Hygienic Walls & Ceilings Ltd
Calibre based in Warrington provide the food industry with food testing technology to ensure quality and safety. Calibre are all about exceeding standards and quality and they needed their environment to do that too.
The walls of their testing labs walls used to be painted in white. They soon became very dusty and dirty making the environment look unhygienic and uninviting to their clients and staff.
Collicutt Meats
Be-Plas Hygienic Walls & Ceilings Ltd
Based in Cheltenham, Collicutt Meats is the largest meat depot in the South West. After almost 30 years, the Elite FRP panels and fixings that were fitted are still looking and performing as good as new.
Courtyard by Marriot
Be-Plas Hygienic Walls & Ceilings Ltd
The Architects involved in the design of the new Marriott hotel at Aberdeen airport really understood the need for a solution for the kitchens which ticked all the boxes.
Beplas’s Elite FRP was the product chosen to line the extensive kitchen areas because it holds the ultimate combination of fire rating, low smoke development, clean-ability and durability.
University of Winchester
Be-Plas Hygienic Walls & Ceilings Ltd
The University of Winchester programmed the upgrade of 63 student en-suite showers and toilet facilities for their halls of residence through the 2014 summer vacation period over an eight-week program.
The walls were covered with tiling. The grout was difficult to clean and the tiles were showing signs of age which required regular repair. It was decided to renew areas with materials that would give long life, reduce maintenance costs and above all make it much easier for the cleaning teams to accomplish their tasks quickly and effectively.
The Shard: Acoustic Ceilings and Bespoke Design
Vtec Group
This high profile project in The Shard was a complete office fit-out, designed to future-proof and meet the end client’s operational needs. The modern design featured Vtec’s MaxiBeam system and Supacoustic panels. These systems allow for excellent visual appeal and acoustic performance combined with being easy to install and flexible to incorporate the specific access requirements.
Pendock column casings on show at Birmingham’s NEC
Pendock
More than 40 bespoke column casings from Pendock were installed as part of a £10.5 million refurbishment programme at Birmingham’s National Exhibition Centre (NEC) to improve the main piazza and facilities.Three different styles of casings were used on the project, the building’s square section structural columns concealed with either circular or extended circular pre-formed ply/MDF casings, finished durable high-pressure laminate (HPL), spanning the floor to ceiling height of around 4 metres.In addition, a series of narrow elliptical casings, finished in red HPL, were manufactured to provide visible signalling of each hall’s entrances. The entrance ‘fins’ also incorporate chrome numbers to identify individual halls.
VALNEVA, LIVINGSTON, UK
MIDDAS
BackgroundThe client needed a fast track solution to replace an existing cleanroom facility to meet their new process requirements. Speed to market was the key driver without compromising future flexibility, whilst ensuring compliance with their rigorous cleanroom standards and cleaning regimes.In addition, the existing building structure could not be used to support any of the services supplying the cleanrooms or cleanroom envelope and the cleanroom ceiling had to be walk on allowing access for maintenance.BriefBYES required an offsite modular solution that could simply be put together onsite with no construction activity, assemble only. The pre-modularisation had to include factory-formed access ways and cut outs for services and equipment as well as having built in low-level extract ductswithin the modular walls. The modular structure also had to support the distributed services and walk on ceiling. All cleanroom finishes also had to be modulated and manufactured off site, ready to install.SolutionMIDDAS worked closely with the BYES design team and the end user to provide a virtual modal in BIM which included all services, fitted equipment and user interfaces throughout the complex suite of cleanrooms and support areas. From here MIDDAS modularised the complete facility including walls, ceilings and the integrated structural steel work required to support the services. Where possible, the modules were kept to standard dimensions however, to ensure a truly modular solution all non-standard size elements were also manufactured off site ready to assemble. The M100 wall system incorporated the return air ducts and provided the framework to support the MIDDAS beams supporting the walk on ceiling and service
ROYAL FREE HOSPITAL, LONDON
MIDDAS
BACKGROUNDThrough the OJEU process, cfes were appointed by the Royal Free Hospital to design, build and maintain a Central Sterilisation Services Department (CSSD) on a brown field site in Enfield. The site incorporated 16 endoscopy reprocessors, 11 washer disinfectors, eight sterilisers, two large trolley washers and associated drying cabinets.BRIEFCfes required a modular hygienic partition system to create the process and support areas around the key equipment whilst achieving the HTM and fire rating requirements. In addition to the walls, the system also needed to support the distributed services and ceiling systems, as no load could be added to the building structure.SOLUTIONThe MIDDAS M100/M200 partition system was selected with associated structural framework, to meet all the hygienic requirements for the project. The M100/M200 severe duty framework was modulated around the key process equipment to provide the fixing locations for the beams. All beams were designed to support the distributed services with clear spans up to 10m, negating the need for secondary steel work. Hygienic ceiling tiles were suspended from the MIDDAS beams in all clean areas with acoustic ceiling tiles fitted in the support areas. The M100/M200 system benefits from full independent fire testing, where MIDDAS partitions have been tested with its proprietary flush glazing and integrated door sets as a system. This ensures the complete facility is fully compliant with the fire strategy for the project and is backed by our comprehensive test data. A further benefit of the system was that the structural framework allowed M&E services to be fitted before the finished partitions. The ceilings were then simply hung in place with factory formed cut outs to suit the service penetrations.
Anderson High School - Lerwick, Shetland
Johnstone's Trade Paints - a brand of PPG Industries
The £55.75 million development, which used a number of Johnstone’s Trade products was shortlisted in the Best Education Project category at the 2016 Partnership Awards. Acrylic Durable Eggshell in off-white was applied to the main wall areas for the striking colours. Other products that were specified for the project included Johnstone’s Covaplus Vinyl Matt on the ceilings, providing a durable finish that is resistant to fading. The doors, frames and skirting boards of the new school was covered with Johnstone’s Aqua Gloss in grey and orange to give a traditional gloss look.
The Chocolate Works Care Village - York
Johnstone's Trade Paints - a brand of PPG Industries
Former Terry's Chocolate Factory in York is transformed into a spectacular Care Village with the help of Johnstone's Trade. The landmark building is Grade II listed and, after a number of years lying unused and unloved was brought back to life using Johnstone’s Trade’s Covaplus Vinyl Matt and Acrylic Durable Matt. Applied to the walls and ceilings of the interior building, making it ideal for high traffic areas. In addition, Johnstone’s Water Based Undercoat and Gloss were used for the trim and window frames, providing a high sheen finish that will stay whiter for longer.
Absorb-R GypLine aw Acoustic Spray Plaster Hylton Castle
Soundis
Celebrating 600 years of history..."The Hylton Castle Project will transform the magnificent gatehouse into a community-based, heritage-led visitor attraction celebrating 600 years of history and sharing the stories of those who lived and worked at the castle from the 14th century until the present. With training for young people, volunteering opportunities, events, outreach, and education programmes, there is something for everyone to get involved in".Soundis were contracted to supply and install Absorb-R GypLine aw Acoustic Spray Plaster to the ceilings on the Ground and Second Floor within the main Activity/Exhibition Space along with the Cafe.Absorb-R GypLine aw Acoustic Spray Plaster was chosen due to its seamless finish providing amazing reductions in reverberation times whilst blending into the look of the whole ceiling which gave a sophisticated but modern look complementing the heritage behind Hylton Castle at the same time of revitalising the building into an attraction hotspot for not only the local community but also educating visitors from further afield about the history of Sunderland.
Powdertech Wood Finish enables designers to combine the look of wood with the strength and practicality of metal.
Powdertech (Corby) Ltd
Powdertech Wood Finish enables architects to combine the look of wood with the strength and practicality of metal. At the same time, this high performance finish compliments the durability of metal and preserves its appearance for many years. PWF replicates wood with variation in colour, grain density and grain pattern. Instead of depleting timber resources, highly abundant and recyclable aluminium can be used. This is a far better material for forming the finely angled aerofoil blades for solar shading. Powdertech have coated thousands of linear metres of aluminium solar shading in various colours for over 20-years. A2 S1-d0 approved.
Janzen Insurance
Longboard Products
Built by Lindan Homes, Longboard Products was proud to be featured and involved in this beautiful design.
With drawings completed by Keystone Architecture this project was first to feature our new Link & Lock Battens, the versatile design was made simple with our interlocking beam product and gave this office space a modern and welcoming design.
Our Link & Lock Battens featured in this project are built for easy install, and creative adaptability. Safe for interior and exterior use, can be used as beams, battens, fins, ceilings and more. Available in all finish options and 4", 6" and 8” batten sizes.
Acklam Hall - Middlesbrough
Johnstone's Trade Paints - a brand of PPG Industries
A wedding venue that showcases a Historic England perfectly has been transformed using Johnstone’s decorative paints. Specified for its high quality finish and whiteness properties, Johnstone’s Covaplus Vinyl Matt in off-white was used to paint the elegant hallway of the grade 1 listed building. As well as being applied on the walls and ceilings of the spectacular reception. Johnstone’s Acrylic Durable Matt was used in the food and bar area, due to its outstanding durability. Additionally, Johnstone’s Satin Woodstain was used on the hand rails of the balconies to protect the wood from decay.
Largest Private Residence in Glasgow - Scotland
Johnstone's Trade Paints - a brand of PPG Industries
Johnstone’s Trade is used to create beautiful interiors for the largest private residence in Glasgow.
Delivering all requirements of the brief, Johnstone’s high quality decorative paints were used to complement the properties
stunning interior and to offer a beautiful home to the residents.
Johnstone’s Acrylic Durable Matt was applied throughout the property to give a long lasting finish. Used on the walls and
ceilings in off-white to increase the light reflectance.
Specified on the doors, skirting and other woodwork, Johnstone’s Professional Undercoat was used to provide the perfect surface for over-coating with Johnstone’s Eggshell.
Five Star Finish For A Residential Property
Schlüter-Systems Ltd
A stunning residential project in Longfield, Kent, saw multiple wetrooms installed and stylishly fitted with Schlüter-Systems products, creating both level entry access and a uniform look.
Rust finish façade Gerrards Cross
Powdertech (Corby) Ltd
Aston House is a collection of thirty-two apartments in Gerrards Cross, Buckinghamshire.The one and two bedroomed interiors are complemented by a mix of classic protruding balconies and Juliet balconies, as well as terraces for the top floor homes. The external envelope has a brick-work skin up to the 4th floor and the fifth-floor penthouse apartments have metal rain screen cladding panels. There is also rain screen cladding around the ground floor entrance lobbies.Popular earthy, natural shadesThe architects wanted a warm, natural shade to complement the pale sand coloured brick work. ‘Rusted steel’ from our Landscape/Terrain range was chosen to coat 850sq metres of mild steel forming the rain screen cladding. All the powders we use conform to fire reaction rating A2-s1,d0 and have a 25-year guarantee for gloss, colour and adhesion.BenefitsPowdertech has years of experience in applying additional coating where needed to protect vulnerable metal surfaces. We call this our Plus+ service.Powdertech’s flexible plant can coat a wide variety of shapes and sizes of architectural metal work and fabrications.Powdertech has over 30-years’ experience in professional architectural powder coating.Powdertech has a very wide range of both standard and unusual powder coating shades and textures.Powdertech's rigorous non-chrome pre-treatment system offers the best preparation for architectural aluminium.
Alder Hey Hospital - Liverpool
Johnstone's Trade Paints - a brand of PPG Industries
More than 13,000 litres of Johnstone’s Trade’s Microbarr Anti-Bacterial Acrylic Matt has been used to deliver a stunning finish at the brand new Alder Hey in the Park hospital in Liverpool.
Microbarr Anti-Bacterial Acrylic Matt was applied over the course of the two-year decorating cycle, covering 51,000 sq m of walls and ceilings. A wide variety of colours were used throughout the building, including warm grey, avocado green, yellow, taupe, cobalt blue and olive. This helped to create the inviting atmosphere that was so important to the client and building’s designers.
SES Co-op Centre - Sunderland
Johnstone's Trade Paints - a brand of PPG Industries
Over 250 litres of Johnstone’s Professional Gloss combined with 37 used shipping containers have helped to create a unique three-storey complex of fully-equipped office space in the North East. Ideal for use on metal surfaces, Johnstone’s Professional Gloss was used to paint the exterior of the containers to give a durable, high
gloss finish. Other products from Johnstone’s extensive range were also used, with Johnstone’s Vinyl Soft Sheen and Johnstone’s Covaplus Vinyl Matt emulsion, both of which are part of Johnstone’s Ecological Solutions range, applied to the interior walls and ceilings.
Barrisol IMO - Oasis of the Seas - Finland
Barrisol
The Royal Caribbean Company, specialized on cruise ship construction, has recently inaugurated the Oasis of the Seas, the biggest and the most luxurious ship of the world. With its 360 meters long, this monster of seas can welcome 7400 persons.
As a central meeting point, the Royal Walk is a place to relax and to admire oceans. 920 m² of microperforated Barrisol Acoustics® stretched ceilings were installed, offering an excellent acoustic quality. Barrisol® stretched membranes also dressed 7 " trees umbrellas " with white matt finish and the kiosk lamps with translucent Barrisol Blanc Vénus ®.
Showing 109-144 of 755