"blind headrail systems curtain tracks and fittings"

Amazon is the world’s largest technology company, with one of the most advanced fulfilment networks in the world.Project/doors: 9 Speedor Storm2 Speedor MiniThe challenge Due to the high-volume of traffic in the fulfilment centres where products are stored and shipped,efficiency of vehicles coming in and out of the building and the safety of drivers is paramount. Slow moving sectional overhead doors were left open to allow speed of access which is vital to efficient deliveries but resulted in heat loss. The solution Seven large Speedor Storms seamlessly integrated with existing doors in a heavy traffic despatch area. The Speedor Storms allow quick and easy access to the openings whilst maintaining internal temperature with its fast open/close action. Due to the quality and longevity of Hart Speedors there is less stress and downtime fixing and replacing defective doors so productivity is unaffected. The success Following the successful installation of Speedor Storms at Amazon in 2016, Hart was chosen as a reliable and trusted supplier. Hart provided expert design advice, specification and installation of the doors to an agreed time frame while not affecting the distribution process. Amazon was given peace of mind with a 2 year warranty as standard.

Topseal PU was specified over numerous roofs on this hospital covering 1000's of metres. Topseal PU was chosen due to its BBA certification, high performance, 25 year guarantee, low odour together with the failed asphalt roofs and amount of plant on the roof it was the perfect product.

Installing a comprehensive internal and external structural waterproofing solution to prevent the ingress of ground water.

Newton contractor Rymill Property Developments were approached by the owner of an old vineyard in Hampshire, in order to redevelop the site. As well as building an immaculate four-bedroom, four-bathroom Georgianhouse for the client, Rymill also took on the task of creating 3 brand new, modern properties, all with basements built into the existing sloping site. The large, partially retained basement areas would all house a stairwell, plantroom, storage room, cinema room, zen room, two ensuite double bedrooms and a garden room, and so required a completely dry internal environment.

Newton Specialist Contractor Garratt’s Damp and Timber provided their waterproofing expertise as part of the refurbishment of this high-end commercial property in the prestigious London Borough of Chelsea, as the basement area was experiencing high volumes of water ingress.

Newton-trained contractor Structural Repairs are leading national specialists in renovating, strengthening and repairing commercial and domestic buildings. However, in 2020 it was their own requirements that were the focus of their efforts, as they sought to renovate a historic railway arch in Windsor in order to create a new head office for the business.

Newton Specialist Contractors ASF Waterproofing were called in to investigate why the Bridge Master’s Quarters at No.1 Tower Bridge was suffering from damp and proceeded to install multiple Newton products to resolve the issue.At the world-famous Tower Bridge, landscaping contractor Maylim was commissioned by the City of London Corporation to investigate why the Bridge Master's Quarters at No.1 Tower Bridge was suffering from damp.After excavating, they discovered that the structure had no effective damp proofing protection. Newton Specialist Contractor ASF Waterproofing were commissioned to install new damp proofing measures to solve the issue.ASF Waterproofing approached the project in two phases, using multiple products to effectively damp proof both inside and outside the building. At the start of phase one, ASF correctly prepared and cleaned the internal wall surfaces before installing a new damp-proof course by injecting Newton 804-DPC into the walls at regular intervals, then sealing the holes with Newton 313-WP. The walls were then smoothed with a new internal render, ready for Newton 103-S to be quickly and easily sprayed to provide a final barrier to water.For phase two, the ASF team turned to the external walls of the structure, preparing and cleaning the surface before applying a new external render coat. The wall was then thoroughly waterproofed with four coats of the flexible, resilient Newton 109-LM. To ensure that the building was completely protected externally, the waterproofing began at 1 metre below ground level and extended all the way up to the existing windowsills.Thanks to their meticulous attention to detail and high standard of installation, ASF Waterproofing were able to provide both the contractor and the client with a high-quality and comprehensive damp proofing solution. As a result, the City of London Corporation can now hand over the building to the new lease holder, safe in the knowledge that it is well protected from damp.

Vehicle/Pedestrian safety barriers for the new 627 space, 6 storey car park at the Derriford Hospital in Plymouth.Like many hospitals, Derriford in Plymouth has to match ever-increasing numbers of patients, visitors and staff with limited parking availability. The new 627 space multi-storey car park on the North West Quadrant will go a long way towards easing the situation for the daily 8,000 footfall to the hospital. Part of a 6.6 hectare site being developed by Wharfside Regeneration for Plymouth Hospitals Trust, the new car park was designed by international architects S333 and built by Sir Robert McAlpine Limited.The eco-friendly design features green walls with climbing plants on the two lowest levels, steel latticework on the next two and timber latticework on levels 5 and 6. We recommended our RB1X Spring Steel Buffers that ‘give’ in a collision to absorb impact forces and minimise damage to the barrier, the vehicle and the car park deck that the barrier is mounted on. After an impact, the barrier returns to its original position to provide ongoing protection. Berry Beam rails were used to give a more refined  appearance than the traditional Armco ‘W’ section.A BS 6180 compliant pedestrian handrail was mounted above the barrier on post extensions of 1,100mm high and the space in between filled with anti-climb mesh to stop pedestrians from falling through, or even climbing over the barrier.

Vehicle and pedestrian safety barriers to edge protection on all deck perimeters; lighting columns included in the 460 space multi-storey car park.

With the opening of 2 new fulfilment centres, Gousto required multiple washroom facilities that could accommodate their growing workforce and can withstand constant daily use.

Project: Fast Food Franchise HQProduct: RapidRoof Pro & FastCoat ProProject size: 300m²Location: Maidenhead

Newton contractor Rymill Property Developments were approached by the owner of an old vineyard in Hampshire, in order to redevelop the site, with Newton providing advice for waterproofing retaining basements on a sloping site for three brand new, modern properties in line with BS 8102:2022.

Norwich High School for Girls is an independent day school combining a nursery, prep school, senior school and sixth form, Norwich High School caters for girls aged 3 through to 18.Bushboard Washrooms were chosen for the recent refurbishment of their school washrooms. The school chose our Quadro toilet cubicle in Mulberry and Steam with Solid Surface washtroughs. Our Solid Grade Laminate material was chosen for the school washrooms providing a robust, totally waterproof washroom, ideal for high traffic. Both the staff and the pupils are thrilled with their new school washrooms. Read the whole case study on our website.

Multi module Glass Link extends natural light throughout open plan living spaceA multi module Glass Link rooflight was chosen for an extension for a private residence located in a suburb of Newcastle Upon Tyne.The rooflight which is dual module, consists of a standard glass specification and overlooks an open plan kitchen dining area.Glass Link was selected due to its aesthetic appeal including its low profile exterior as well as its ability to extend daylight along the length of the kitchen area.

Brett Martin supplied Marlon Clickfix VF to create striking facades in the new-build Cheltenham Muscat School in Oman. This is founded by Cheltenham UK and is not only their first international sister school but also Oman’s first premium British school.

Clickfix sculpts the light in royal art & design studioBrett Martin supplied the polycarbonate panels used to glaze the striking northlights in the roof exhibition space in the new Battersea campus of the Royal College of Art, London which the college described as ‘the most significant campus development in their history’The architects brief was to bring together art, design, science and technology in one place and the building has been certified as BREEAM excellent.Marlon Clickfix pans across 2 vertical sections in the top floor of the 4-storey Studio Building dedicated to traditional art and design disciplines.The product was selected due to its ease of installation, thermal insulation and high levels of natural light which allows for large, glazed areas. The bright space and the sheer size of the glazing in this building illustrates the benefits of the product wonderfully and as stated by the guardian “The space beneath the big triangular skylights is glorious”. 

A comprehensive set of rooflight solutions has been provided, including Energysaver factory assembled GRP rooflights, to a newly expanded production facility in Dundee. Brett Martin was selected for this project due to meeting for 3 separate specifications. This involved supplying daylighting solutions to an existing building, new building and link corridor. These rooflight play a significant part in ensuring this facility meets its energy targets, whilst enhancing the working environment. Specifications: Factory Assembled Rooflights: 230m2 of Trilite 3.0 Energysaver FAIRs Vaults: 2 x 8m and 10 m Triple skin GRP Multivaults Skylights: 2 pyramid glass Ritchlights, 2.5m x 2.5m

SMET supplied 20,000m2 of superior-quality Sopro Rapidur® B5 Rapid Drying Screed Binder to Smet Supported Partner, Brendan Doherty Screeding Services, for the flooring solution in the new hospital complex, The National Forensic Mental Health Service (NFMHS) in Portrane.The NFMHS is a new state-of-the-art facility located 22 km from Dublin City in Portrane, North County Dublin. The project was awarded by Health Service Executive to the Joint Venture formed by OHL (50%) and OHL’s local delivery partner JJ Rhatigan (50%).German-made Rapidur® B5 Rapid Drying Screed Binder is a special polymer-modified binder for particularly economical ­production of high-strength, rapid-set cement screed – based on DIN 18560 – allowing early floor installation, and for laying to falls.  Rapidur® B5 is suitable for use on heated screeds, bonded screeds, unbonded screeds, and floating screeds. This flooring solution is particularly useful for fast-track or tightly scheduled screed laying. The newly laid Rapidur® B5 screed floor is ready to receive floor covering after approx. 3 days – after the achievement of moisture content ≤ 1.8 % CM. Sopro Rapidur® B5 is supplied in 25kg bags, with 40 bags per pallet.Key features of Rapidur® B5:• Ready for tiling after only approx. 3 days• Achieves grade CT-C45-F7 after 28 days*• Pumpable• For fast-track or tightly scheduled screed laying and laying to falls• Suitable for floor heating systems• Long working life: approx. 2–3 hours• May be applied in mixing ratios 1:4 and 1:5• High resistance to moisture migration from the substrate• Suitable for renovation and refurbishment schemes• EMICODE system of GEV (German Association for control of Emissions in Products for Flooring Installation): EC1PLUS R (‘very-low-emission-plus’) rating• For indoor and outdoor useSMET delivers another innovative, showcase flooring solution to their Smet Supported Partners. Click the link to see a showcase of jobs recently completed by expert screeder, Brendan Doherty Screeding Services.

Spearheading an ambitious programme of regeneration, Canada Water Library resembles an inverted ‘ziggurat’ – a terraced pyramid of successively receding storeys – that partly overhangs the Canada Water basin.The £1.4m building sits at the edge of a civic plaza and a stretch of open water. The expanding pyramid form integrates a compact footprint at ground level with progressively wider floors above. The building is clad in light bronze anodised aluminium panels with sequined perforations, interspersed with recessed curtain wall screens. This design gives the project a sculptural appeal and a striking visual effect.Finished in bronze anodised aluminium, the structural sealant glazed facade and commercial doors were specified for the ground floor. A Visible Grid Facade has being used for the strips of curtain walling to the three upper floors, with top hung concealed vents and aluminiumdoors providing access to the balconies.The library forms part of the vibrant quayside at Canada Water - a historic Docklands that was once a bustling port. It was designed to exemplify the importance of the library, education and community facilities for local people and focus on the new phase of regeneration.

During Phase 1 of the project, Big Yellow worked alongside Hollis Global, real estate consultants, and Welbro, specialists in the refurbishment of industrial buildings. Hollis was responsible for the project management and successful installation of the PV system by EvoEnergy. After concluding the roofs were not fit for solar in their current condition, Hollis introduced Sharmans roof refurbishment systems to bring the roofs back up to standard.

Castlebrae Community Campus officially opened its doors in Spring 2022. The new 700 capacity secondary school, which has the potential to be increased to 1,200, was constructed next to the East Neighbourhood Centre and Library (a project Metal Technology also delivered for Hub South East Scotland).Designed by JM Architects and delivered by Morrison Construction, this fantastic new building for The City of Edinburgh Council provides an exciting, inspirational and creative learning hub for the community. It forms one of the final pieces of a 20 yearlong regeneration project to improve housing stock and community facilities in the area. The development was very much a collaborative design, with numerous workshops and meetings to engage the community in the process.The relationship between the interior and exterior of the building was crucial, developing a holistic approach to improve the learning, attainment and health and wellbeing of the community. Metal Technology Ltd supplied its System 4-35Hi+ top hung windows, System 17 curtain walling, System 5-20D Hi+ doors and System 23 louvres and were manufactured and installed by approved fabricator Avtek Ltd.The project has been shortlisted for the following awards: Pupil/Student Experience and Inspiring Learning Spaces at the Education Estates Awards taking place on 18th Oct and Inspiring Learning Spaces at the Learning Places Scotland Awards taking place on 15th Nov.Word has it that the pupils are greatly enjoying and benefiting from their wonderful new learning space and environment – what it’s all about! We’re delighted to have been a part of this build for the Craigmillar community.(Photography Credit – Cadzow Pelosi)

After 20 years in its Judd Street office in London’s Kings Cross, the Royal National Institute of Blind People recently moved to a new head office that better suited the charity’s evolving needs. The Grimaldi Building, a characterful self-contained office, serves as the charity's new London hub. Months of detailed planning and a thoughtful fit-out was required to ensure the new office facilities met the needs of all the RNIB employees and visitors. Understandably, accessible drinking water was a top priority."Zip HydroTaps have been used on a number of our projects and I have always found the team at Zip very willing to engage and explore a variety of user needs, which is really helpful – accessibility, clarity and ease of use is always a primary consideration for all our projects" Jean Hewitt, Inclusive Designer | Buro HappoldThe briefAn essential amenity in the workplace, the RNIB needed to provide staff, visitors and volunteers with easy access to both boiling and chilled drinking water, for hot and cold beverages. Integrated consulting engineers and advisers Buro Happold had their inclusive design expert Jean Hewitt on hand to support the RNIB with the Grimaldi building refurbishment, advising on accessibility. Her primary focus was ensuring that the building design considered those with sight loss and with this in mind, began her search for a drinking water system that was as inclusive as possible.The solutionOur HydroTap Accessibility range is designed specifically to support visually impaired, wheelchair and limited dexterity users. Jean chose to specify two HydroTap Accessibility models that provide instant filtered boiling and chilled drinking water. “I was attracted by the accessibility features, such as very clear colour coding and easy grip extended ‘ears’ for people who may have reduced dexterity and grip. The inclusion of tactile and Braille markings makes the use of the tap more intuitive for everyone,” explains Jean.The results"Zip HydroTaps have been used on a number of our projects and I have always found the team at Zip very willing to engage and explore a variety of user needs, which is really helpful – accessibility, clarity and ease of use is always a primary consideration for all our projects"Jean Hewitt , Inclusive DesignerBuro Happold

Client: Bruntwood Estates Specialist Contractor: Grade-2 Structural Repairs Main Products Used: Emseal SJS SystemThis busy, multi-storey, prime location, car park is located between Manchester United’s Old Trafford Football Stadium, Lancashire’s Old Trafford Cricket Ground and Trafford House, a 12-Storey commercial development. The businesses use the car park during the week and then it is reserved for MUFC fans on matchdays and weekends. The car park was undergoing scheduled structural inspection, when it was discovered that the traditional compression joints were failing in the wide structural movement joints on the access ramps. This meant they were now leaking and allowing water ingress, which could lead to damaging salt deposits on expensive vehicles, as well as potential corrosion and damage to the reinforced concrete decks and the structural frame itself. These joints needed to be made watertight and accommodate significant horizontal and vertical movement, as well as traffic impact and weathering. The engineers looked for a solution that could safely repair and seal the joints, but with only minimal ramp closure or downtime, and the Emseal SJS System was selected as the ideal solution, as it could be installed in just two short, phased closures at weekends, when there were no home games. In the first weekend, with only one lane closed, the failed compression joint was removed and the joint arrisses made good with fast setting resin, then on the next weekend closure, the bespoke lengths of Emseal SJS were installed with access only required from above.  

Derbigum + BluRoof = Sustainable Drainage Solutions Mitigate your risks with Alumasc BluRoofs Think Stormwater Management - Derbigum BluRoof SolutionsA 5-minute hop from Cardiff Queen Street and you’ll find the first blue roof in Wales. Upon what was formerly 1960’s office accommodation the Cromwell House site has been transformed into an 8 storey, 120-bedroom easyHotel with a rooftop stormwater management system. OUR DESIGN PROCESSOur clients at Carter Lauren Construction were interested in learning about the benefits of a blue roof to meet planning conditions. ” Working in a compact city centre environment where ground attenuation was not possible, it made sense to install a blue roof. The Alumasc team demonstrated how their BluRoof System attenuates stormwater via controlled discharge over a 24-hour period at roof level.” Kevin Jenkins, Surveying Director, Carter Lauren Construction. CLIENT BRIEF AND DESIGNWorking closely with the appointed consulting engineer and architect, our team of technical experts designed a solution for stormwater attenuation to comply with planning and meet all other project objectives. Alumasc’s Matt Davies, Area Technical Manager - Mid, West & South Wales commented, “Given the urban location, the Alumasc BluRoof system was the perfect fit in providing a fully warranted single-source waterproofing and sustainable drainage solution.”The Alumasc technical team provided a full specification service and specialist drainage design using key data from the project brief. By incorporating our BBA Accredited Derbigum APP polymer modified bituminous waterproofing system the longevity of the total solution is assured with a proven track record since 1967. Other key components comprise of a BluRoof geotextile filter fabric, BluRoof interlocking void former, flow control outlets, and overflow system.ENVIRONMENTALLY FOCUSSED SOLUTIONExtreme weather events are now the new normal, says the World Meteorological Organisation. Our rainfall patterns are becoming increasingly unpredictable, and we must plan accordingly to adapt the built environment to help alleviate flood risk. PARTNERSHIPWorking with the contractor to construct the first blue roof in Wales. Kevin Jenkins, Surveying Director, Carter Lauren Construction, “Matt and the Alumasc team were available throughout the design and installation process. We knew that installing the BluRoof by Alumasc was the right decision for the future of the easyHotel and the benefit to reduce pressure off the drains.” SAFETY PERFORMANCEThe easyHotel has a 35-year warranty for the works and life expectancy of up to 50 years.ABOUTEasy Hotel Cromwell House, Cardiff - Wales’s first blue roof. Completion: Spring 2021 Main Contractor: Carter Lauren Construction Architect: Axiom Architects 

Known as The Silverstone Wing, in reference to its radical angles and elevations, the complex is the culmination of a series of enhancements to the iconic race track, bringing it up to the latest Grand Prix standards. The 390 metre-long building includes a totally new pit-lane area, with 41 new garages and a surface area covering 6,200m2, spectator and hospitality zones, a 2,780m2 Media Centre and a new race control tower.

Enfield Care Homes was fabricated and installed by EYG Commercial, a project which showcased a range of AluK products including; 58BW windows, GT55 TB commercial doors, BSC94 sliding doors and SL52 curtain walling. An important element of the specification by developers, Morgan Sindall development was for the windows to achieve high acoustic and thermal performance to ensure minimum noise pollution and maximum energy efficiency.

The second tallest building in the United Kingdom, and tenth largest building in the world is home to an impressive amount of BLÜCHER EuroPipe! All 62 floors are equipped with stainless steel drainage, from RWP, SVP and food vacuum systems to interceptor foul drainage and disconnecting traps for rainwater.The project spanned over two years, and it was a no brainer that our lightweight, adaptable and push fit system was chosen as the sole supplier.

Sophisticated and contemporary office designs means ensuring perfect and seamless integration to complement the space.The creative brief for this design focused on embracing the intricate architectural details of the space such as the natural shapes and overall industrial vibes.Vtec's SupaSlat System and MaxiBeam Systems were specified in this unique office fit out. With such large zones, the team achieved the precision that was required, with 3D modelling to ensure precise coordination, positioning and integration.

Gradus has supplied and installed a range of bespoke wall protection solutions throughout the new Same Day Emergency Care building at the Countess of Chester Hospital. Fitted by the Gradus Contracts Team, the system includes wall guards, corner guards and combination handrails.

In recent guidance from the Department for Education (DfE), specifically BB103 and BB104, it has been strongly recommended that both mainstream and Special Educational Needs (SEND) schools incorporate hygiene rooms as an essential component of their facilities to comply with regulations. This highlights the commitment to creating inclusive learning spaces that cater to the diverse needs of students.This guide shares five crucial insights for anyone embarking on the journey of creating hygiene rooms within educational institutions.One. Adhere To DfE Guidelines:Underscored is the importance of aligning with the Department for Education (DfE) guidelines, specifically BB104 and BB103. These guidelines set forth the standards necessary for designing hygiene rooms that cater comprehensively to the diverse needs of students with disabilities. We’ve briefly outlined the guidance below:BB103: “Area Guidelines for Mainstream Schools”:BB103 provides guidance on the space requirements and design considerations for various areas within mainstream schools. This includes classrooms, dining areas, toilet facilities, and more. The goal is to ensure that the physical environment supports effective teaching and learning, as well as the overall well-being of students.BB104: “Access to and Use of Buildings”:BB104 focuses on access to and use of buildings, specifically addressing issues related to accessibility for individuals with disabilities in SEND schools. This guideline outlines the standards for creating an inclusive and accessible built environment within educational facilities. It covers features to ensure that buildings are welcoming and usable by everyone.Most importantly BB103 & BB104 state that a hygiene room should be included in all school settings.Two. Ensure You Have Considered Full Room Hoist CoverageIt’s important to consider the mobility of students when planning for a hygiene room installation. We recommend the Astor OT200 Overhead Ceiling Track Hoist, this advanced hoist system offers full room coverage, ensuring secure and seamless transfers for students with mobility challenges. Improving the utilisation of space and the versatile enhancement of accessibility within hygiene rooms. Discover more about the Astor OT200 Overhead Ceiling Track Hoist here, including its X-Y track system to give access to all amenities and facilities, room-to-room transfer capabilities, considerations for door height/track system impact, and room height/depth of track.Three. Choose The Correct Changing TableIn schools, changing tables are essential for students with disabilities, offering a supportive and dignified space for changing routines. Tailored to various needs, these tables contribute to creating an inclusive environment, ensuring all students feel welcome and supported. When selecting a changing table for a school hygiene room, you’ll need to consider crucial factors. The key considerations when making your decision include:Wall Mounted / Mobile: Considerations include the available space, access and the number of carers needed.Height Adjustability: Protect your carers by insuring easy adjustment to the correct working height,Maximum Working Load: Ensure durability for daily use with a robust design.Size: Optimise functionality by considering the changing table’s size in relation to available space.Shower Tray Required?: Enhance hygiene with the option for a practical shower tray.Space / Need to Stow?: Maximise efficiency with a fold-away design for space-saving and easy stowing.Tilting Headrests: Improve user comfort with tilting headrests for a friendly changing experience.Explore the Astor CTX2-CP, with a water collection tray and drain hose which is ideal for showering and changing. The CP model comes with an emergency stop button which is perfect for multi-user environments such as Changing Places Toilets, schools and care environments.Four. Include A Height Adjustable Wash BasinInstalling a Height-adjustable wash basin will offer accessibility for students with a range of disabilities. Specially designed to cater to diverse needs, these basins ensure comfort and prolonged independence, fostering an inclusive and supportive educational environment. This inclusive design not only enhances the overall functionality of these spaces but also emphasises a commitment to inclusivity, ensuring that every child can navigate and utilise hygiene facilities with ease and dignity.We recommend the Astor ABW-CP Height Adjustable Wall Mounted Wash Basin featuring a spacious basin surround, it aids wheelchair users in transitioning from sitting to standing. Controlled effortlessly by a handheld device, the ABW-CP includes a large integrated mirror and an adjustable soap dispenser for added convenience.Five. Consider The Colour Scheme For Sensory Well-BeingWhen designing hygiene rooms in schools, you will need to consider a strategic colour contrast for enhanced sensory well-being. Instead of solely opting for calming colours, integrate high-contrast elements like light-coloured walls with dark or bright furnishings. This not only aids sensory wayfinding, particularly for children with autism, but also creates visually distinct zones within the space. Consider incorporating varied textures alongside the chosen colour palette to further enrich the sensory experience. By taking a thoughtful approach to colour contrast, hygiene rooms can become incredibly positive and inclusive spaces that support the well-being of all students.To ConcludeIn summary, this guide advocates for a comprehensive approach to inclusivity when installing hygiene rooms in schools. Prioritising adherence to guidelines, making innovative equipment choices, and adopting thoughtful design are central to creating educational spaces that address the diverse needs of students. With these insights, professionals can work towards seamlessly integrating inclusivity into the very fabric of educational environments. Our skilled team has many years of experience planning and installing equipment in public spaces like schools and universities.Please do get in touch if you need help or advice with your project or further support on the government requirements for equipment to support SEND students.

Closomat has worked with high-profile stadiums across the UK since the Changing Places campaign began, installing high-quality, robust facilities that meet the needs of venues experiencing large volumes of traffic.The inclusion of Changing Places toilets at sports venues has long been a key target area for the Changing Places campaign. As of January 2021, changes to Building Regulations in England mean, it is mandatory to include at least one Changing Places toilet in any newly-built stadia with a capacity of over 2,000, or existing venue that undergoes substantial development.Changing Places by Closomat can be found in the following: The 1st Central County Ground (Sussex Cricket/England)Edgbaston (Warwickshire County Cricket Club/England)Headingly Stadium South (Yorkshire County Cricket)Manchester Velodrome – indoor Olympic-standard, cycle-racing trackPrincipality Stadium (Cardiff) Tottenham Hotspur Stadium (East and West Stands)Wembley StadiumBoth Edgbaston and The 1st Central County Ground feature one of Closomat’s new Changing Places pods – prefabricated facilities that are constructed off site, delivered ready to be installed. These modular Changing Places are an ideal solution for older stadiums where retro-fitting can be difficult due to space or building constraints or where disruption needs to be kept to a minimum.

Chipping Homes specialises in building high quality, architecturally sensitive homes, which made the choice of contractors critical. This was especially the case for the window contractor – with over 300 windows required, getting the right look and feel for this element of the project was essential. The windows specified for the contract were Optima from Profile 22, the UK’s leading award-winning commercial window system. The fabrication and installation contract was awarded to Profile 22 Approved Contractor Kingfisher Windows, a leading manufacturer and supplier of windows, doors and conservatories.

Installer – Dearneside Fabrications LimitedMain Contractor – Taylor WimpeyArchitect – PRP ArchitectsClient -Taylor WimpeySystem- Vantage® CS (Coping / Capping system)Loyal customer and expert installer, Dearnside Fabrications Limited contacted us about utilising our Vantage® CS coping on this exclusive residential scheme next to the Chelmer River, Chelmsford, south east England.BTS Vantage® CS system was chosen because it has been designed with many advantages over standard pick and mix systems.Although every CS installation is engineered individually, the coping system is always very quick and easy to fit on site. It is always clipped on ensuring no fixings pierce the top side or front face of the coping. The only visible fixing is located on the inside wall. The capping is located on a robust extruded alloy bracket with specially designed grooves that include a rubber gasket, ensuring a snug watertight and anti-drum fit.The photos do not do the system justice as there is no butt straps needed leaving nice smooth lines and where corner junctions are needed, they just slip into place!As always BTS take great pleasure in supporting a key customer on such a prestigious installation which is now helping to deliver 421 new homes in a thriving riverside quarter development.Dearnside Fabrications Limited

Client: Grove Developments/Arora HotelsContract value: £362kProducts used:  0.74kN loading stainless steel with glass balustrade to stairs1.5kN loading structural glass balustrade to link bridgesThe dual-brand Crowne Plaza and Holiday Inn Express, which operates under Arora Hotels, is located at Heathrow Terminal 4 and opened in 2018. It consists of 300 rooms as well as business and meeting facilities. The building is directly connected to Heathrow’s Terminal 4 via an air bridge and also offers convenient access to the London Underground, Heathrow Express train service and nearby major motorway routes. We were instructed to supply and install more than 600 metres of balustrades, as well as over 300 metres of wall fixed handrails during the hotel’s construction phase. The balustrades used for the project were 1.5kn structural glass balustrades to bridges and 0.74kN loading stainless steel with glass balustrade to stairs. We provided approximately 300 metres of structural glass balustrades to the hotel’s link bridges. At the design stage of the project, we were advised that the bridges could deflect by 25mm, so our balustrade design had to accommodate this. The solution was simple but very effective – we left a 5mm gap in between each five-metre length of track, which was not noticeable when walking along the bridges but allowed for adequate movement in the structure with no damage to the balustrades or the finishes, and no compromise to the overall look. In addition, we adapted our handrail system to provide protection to the walls where guests wheel trollies and luggage into the hotel. By fixing handrails along the flooring close to the walls, it provided a functional yet attractive solution to avoid any marks or scratches that luggage might create.The overall result was a mix of balustrades to the hotel’s stairs and link bridges, plus handrail finishes to the high-traffic areas of the premises that all fit in with the building’s modern and clean design. 

Formica Group is a leading provider of branded, designed surfacing solutions for commercial and residential customers worldwide. When its North Shields factory had some serious issues with an existing corridor flooring, the company turned to a local flooring supplier to suggest a suitable solution, which ultimately saw Formica Group specifying 300m2 of Attraction® fast track vinyl floor tiles from international flooring specialist Gerflor.

Organic UnAtex Red was utilised on the feature façade and the interior running track.  The architect at Shepard Robson (Simon Davies) developed a patinated two tone multi-layered finish within the Anodised Aluminium surface.  This finish is unique to the UnAmil process and was developed as a bespoke solution for this project.  The Anodic Finish is A1 fire rated and carries a lifetime guarantee.UA worked closely with the architect and Sotech to produce the unique facade on the building.