"above ground foul drainage systems"

The stadium is actually tilted on one side a little bit which makes a lot of significance. The slope is from the north end of the ground to the south end of the ground. And the difference in depth is 2.5 metres.This is where I wanted to arrive:With or without a slope? That's the question. Sometimes, having or not having a slope in a site, can make all the difference for the drainage solution needed. As you know, as slope limitations can be found in some places, but in ULMA we have a solution:The first Polymer Concrete channel with built-in 2.5% slope.

Triton products, including liquid applied TT Vapour Membrane, were specified to form a ground gas barrier system in the redevelopment of listed almshouses situated in close proximity to a landfill site.

As the demand for more cost effective and simple drainage systems grows, Marshalls Mono Beany was selected to help improve a busy A road along the south coast.

To fulfil the requirements of BS8102:2022 and BS 8485:2015+A1:2019 a strategy to develop a specification which combines structural waterproofing and ground gas protection were required for this refurbishment project.The project involved creating additional living space to an existing mid terrace Victorian property in W12. The site of the property, whilst not being located on contaminated land was identified as being potentially at risk, it was near what is classed as contaminated land (an old brick yard).To satisfy Building Control requirements gas protection measures were required to meet BS 8485:2015+A1:2019.Site investigations at former brickworks and landfill sites are within expected UK guidelines for contamination. Ground investigations incorporate both soil sampling, ground gas and groundwater monitoring.In accordance with Table 3 of BS 8485:2015+A1:2019 a residential building is classed as a Type A building, creating a “high risk” requirement for ground gas protection. With the structure requiring a Grade 3 habitable environment attention as required to offer a system which meets all requirements.

Harmer Building Drainage, part of Alumasc Water Management Systems (AWMS), has recently supplied its leading SML below ground drainage system to a major London development. The project, sited at The Minories, Aldgate, sees the introduction of the first Canopy by Hilton hotel in the UK which is scheduled to open in 2018. Working with contractors PCW Drainage Ltd and A J Morrisroe, Harmer supplied below ground drainage for the hotel’s new double storey basement box.The Minories Hilton hotel is a prestigious development, close to London’s historic Roman and medieval city walls and a short walk from the East End. Wayne Wilmot, National Sales Manager for Harmer Drainage comments: “It’s an unusual site. The contractor, A J Morrisroe, constructed a double storey basement box and podium slab to support a 16 storey residential block and a 14 storey hotel extension. It covers a footprint of around 3,500 metres across a narrow site. There were multiple levels of earlier construction to work through, including foundations and piles that date back to the 19th century. And because it’s close to the East End, The Museum of London and 1st Line Defence got involved to establish if there were any WW2 unexploded bombs buried on the site! Definitely not a run-of-the-mill project!

Lord's Cricket GroundBauder LiquiTEC Balcony and Walkway, LiquiBALKON SystemSynopsisLord's Cricket Ground is a famous cricket venue located in St John's Wood, London. There are various Bauder waterproofing systems installed throughout the venue but these images are from the Edrich Stairs on the third level.Bauder Building BoardProject:Lord's Cricket GroundProject type:RefurbishmentLocation:Basingstoke Waterproofing:LiquiTEC Balcony and Walkway systemRoof size:25m²Specifier:Rider Levett Bucknall LimitedApproved contractor:Higham Flat Roofing Ltd

When craft beer brewer BrewDog wanted to increase the size of its brewery, ACO Building Drainage was chosen to provide an engineered hygienic drainage system.

The Project The world-famous Lords cricket ground has undergone a huge redevelopment scheme. Phase 1, The Warner Stand, has undergone complete modernisation by Main Contractor BAM and was officially opened by His Royal Highness The Duke of Edinburgh on 3rd May 2017.  The refurbishment includes works to the ornate, iconic Victorian Pavilion, with a wing-like roof and fabric canopy; the seating, ensuring maximum visibility for spectators; and the indoor bars and restaurants with panoramic glass windows ensuring the ultimate experience. The Challenge Deliver multiple specifications across differing floors and areas. Propose a system that will deliver a reflective aesthetic, similar to glass. Manufacture and install toughs at bespoke lengths requiring site joints   The SolutionExcelsior was delighted to work on this prestigious project with Populous Architects and BAM Construction. Several specifications and finishes were chosen across the project, our Planar 20 in High Gloss being a favourite. The High Gloss laminate created a glass like, reflective finish which opened up the space and made for a truly show stopping installation. Designer White Solid Surface tops, and Stainless-Steel finishes were also used to dramatic effect across the scheme.SpecificationProduct Range: Planar 20Doors: 12mm SGL, Abet 478 Light Grey Lucida Gloss, Abet 879 Graphite Grey MattPilaster: 20mm SGL, Abet 478 Light Grey Lucida Gloss, Abet 879 Graphite Grey MattPartition: Partition: 12mm SGL, Abet 410 Ice White Lucida Gloss, Polyrey B070 Blanc Megeve MattIronmongery: Stainless Steel

The Silverburn shopping centre is one of the largest in the UK, with over 100 stores and a 100,000m2 car park. With more than 2000 parking spaces spread over many levels, can you imagine how many people pass through every day? Effective drainageThe previously installed drainage system had begun to fail, causing the car park to flood in some areas. The old system needed replacing with something innovative and new Kompaqdrain CityThe Max-Flow® effect of our Kompaqdrain channel ensured effective drainage. Comprising an original design with curved grating inlets and an anti-slip and water-directing surface, optimising water collection and utilising the water's energy to increase speed and drainage capacity. User safetyThe channel and grating of the Kompaqdrain City model form a single monolithic system ensuring strength throughout the whole channel. As the grating forms part of this system and is not separate there are no risks of lifting of shifting coupled with smaller collection holes thus preventing trips and falls!

Almost 10,000 metres of ACO KerbDrain provides highway drainage to this major infrastructure upgrade

The project was to convert a former vehicle maintenance and repair workshop into a dwelling. Ground tests did not reveal any significant level of Volatile organic compounds (VOC’s) in the soil but the local authority required a gas membrane to be installed and independently verified.

Delta Registered Installers, Bensleys provided a waterproofing solution on an iconic Brighton structure.Steeped in history and thought to be built on the original Brill Baths site, sits Clarendon Mansions. This large, detached structure is thought to have been built in 1870 by Charles Brill during the Brighton boom.The four-storey building facing Brighton’s famous sea front, was originally constructed as a hotel.Numerous refurbishments over subsequent periods of time, saw the structure move from a hotel to a public house, with the basement area being unoccupied for nearly a decade.The basement area boasts large, vaulted areas to the south and west elevation, with the south-side possibly being part of the original Bath structure.Bensleys were instructed by the main contractor, Pilbeam Construction on behalf of Evolution Architects, to help design, specify and install the waterproofing system.There’s no one-size-fits-all when it comes to waterproofing design. With the basement suffering from water penetration, Bensleys worked with the design team at an early stage of the project to ensure the right approach be taken, which included multiple factors such as: customer requirements, standards, robustness, cost, resources, time, skill required, safety and expectations of ground water which all translated into a design solution.

The global drinks manufacturer Britvic have recently completed the expansion of its manufacturing site in Rugby. This particular investment involved installing a fourth canning line, growing the site capacity by 18%.This new, state of the art canning line was designed to boost Britvic’s Rugby facility, which continues to produce recyclable cans for popular drinks brands such as Tango & Pepsi. The additional capacity will also be used as a platform to drive further innovation and expansion within the business.Aspen Stainless Davos Plus drain channels with ladder covers were installed to cope with the high level of waste demand on site. The channel profile was carefully designed to provide an easy to clean surface with a self-draining slope feature. The strictest level of hygiene standards are required within food manufacturing facilities due to the build-up of bacteria and possible cross contamination of liquids. The new drainage channels were designed to match the existing flow and volume capacity of their existing drains and included bespoke outlets, tied into the building’s underground drainage systems.Banff outlets were also installed with a hinged trap, the removable trash baskets were designed to efficiently dispose of the non-liquid waste, which has built up within the outlet. It’s essential the drainage is perfectly aligned to ensure a seamless connection across the entire site to boost performance standards.The drainage channels are designed in compliance with EHEDG (European Hygienic Engineering & Design Group) to support safe hygienic engineering in food manufacture. The EHEDG states ‘product contact surfaces must be easy to clean, non-absorbent and not present a toxicological hazard by leaching of substances and foodstuffs’ the cleanability of the drainage is also an important hygiene requirement as stated in the EHEDG ‘Improperly or insufficiently cleaned equipment cannot be effectively disinfected’The perfectly fitted drainage system boosted the overall hygienic performance of the new drinks recycling facility. This included employee health & safety, operational costs as well as consumer safety. The dedicated project managers worked closely with the contractor during the entire installation process to ensure the highest standards for drainage and protection were achieved.If you have any questions regarding our drainage solutions, please email aspen@canalengineering.co.uk or visit our website and speak to one of our technical advisors for more information.

Leicester City Council has worked collaboratively with Asda, ISG and ACO Water Management to achieve a first in sustainable urban drainage within a supermarket development. The solution is an integrated drainage solution that combines proprietary and vegetative systems to achieve effective surface water management, whilst introducing a level of biodiversity never attained before on a retail development.

A popular brewery brand recently expanded its headquarters to support the increase in demand of its craft beer range. John Lord Flooring were approached to specify the resin flooring and Aspen Stainless steel products were utilised for the drainage system. The Uragard-HT62W antimicrobial resin flooring was an ideal solution for the project due to its durability, chemical resistance and anti-slip properties. The floors and drains worked hand in hand to distribute waste water into the central drainage channel within the processing area.Aspen Stainless Davos Plus drain channels were installed to cope with the high level of waste demand within the brewery. The channel profile was carefully designed to provide an easy to clean surface with a self-draining slope feature. The strictest level of hygiene standards are required within food and drink facilities due to the build-up of bacteria and possible cross contamination of liquids.   It's essential the drainage is perfectly compatible with the flooring to ensure a seamless connection and high performance. This partnership with John Lord supports optimum performance compatibility by preventing the elevation of floor plates that can compromise hygienic performance.The drain channels are designed in compliance with EHEDG (European Hygienic Engineering & Design Group) to support safe hygienic engineering in food manufacture. The EHEDG states ‘product contact surfaces must be easy to clean, non-absorbent and not present a toxicological hazard by leaching of substances and foodstuffs’ the cleanability of the drainage is also an important hygiene requirement as stated in the EHEDG ‘Improperly or insufficiently cleaned equipment cannot be effectively disinfected’ A perfectly fitted drainage system will have a positive impact on boosting the hygienic performance of the entire facility. This includes employee health & safety, operational costs as well as consumer safety. The dedicated project managers worked closely with the contractor during the installation process to ensure the highest standards for drainage and protection were achieved. If you have any questions regarding our drainage solutions, please email aspen@canalengineering.co.uk or visit our site and speak to one of our technical advisors for more information. 

Marshalls Civils & Drainage have supplied 15,000 linear metres of Mono Beany, one-piece combined kerb and drainage to the new M1 smart motorway scheme.

BLÜCHER UK were pleased to supply some bespoke channels and shower drains for a brand new leisure centre opening in the New Year.With a big range of activities and services available, including swimming pools, showers, saunas, steam rooms and communal areas, the installed drainage system needed to be robust, efficient, and visually aesthetic.Offering a contemporary timeless design, with an exceptional flow rate, BLÜCHER channels were the best option. Minimal downtime and maintenance were required by the customer due to the high usage of the leisure centre, with a further focus on retaining a hygienic atmosphere.Working alongside contractors ISG and GHBS, BLÜCHERs stainless steel drainage solution has provided Knaresborough Leisure Centre with a fully functional drainage system, ensuring they can meet the demands of their customers while preserving a safe and hygienic environment.

Siniat delivers high-performance, full system for landmark training facility  Siniat played a significant role in supporting the construction of one of the most modern, state-of-the-art training facilities in Europe. Built from the ground up on the site of a former golf course, Leicester City’s new training ground was designed to be an iconic landmark building, providing a platform for success, growth and development for the next generation of sportspeople.  

Marshalls supplied 15,000 linear metres of Mono Beany one-piece combined kerb and drainage to the new M1 smart motorway scheme.

This new housing development in Leicestershire required porous, all-weather driveway surfacing for the new three, four and five bedroom homes that would manage rainwater and avoid local flooding. Tarmac's ULTIPOROUS provided the solution combining excellent drainage characteristics with proven long term durability and meeting local planning requirements and delivering a sustainable drainage solution.

The second tallest building in the United Kingdom, and tenth largest building in the world is home to an impressive amount of BLÜCHER EuroPipe! All 62 floors are equipped with stainless steel drainage, from RWP, SVP and food vacuum systems to interceptor foul drainage and disconnecting traps for rainwater.The project spanned over two years, and it was a no brainer that our lightweight, adaptable and push fit system was chosen as the sole supplier.

160 linear metres of drainage solution have been installed in the area surrounding the Town Hall and its car park.As regards the grating, the slot drainage was selected, suitable for load class D400. The choice of this type of grating has provided an ideal solution for this cobbled area, as a discreet and aesthetically pleasing option, without relinquishing drainage capacity. In total, 160 linear metres of drainage have been installed.

Challenge Hard-wearing, aesthetically pleasing paving options were required to bring life back to well known tourist destination Portrush Recreation Grounds is a key destination for visitors to Northern Ireland’s beautiful North Coast. The location is such a well-known spot, providing visitors and the local community with sports, recreation and leisure facilities for the last 100 years.Unfortunately, due to wear and tear over the years the location had become rundown and underused. Due to the condition of the site, many areas had been closed off to the public.Causeway Coast and Glens Borough Council with the support of Department for Communities and the UK Government Levelling Up Fund, have approved a refurbishment. The renovation hopes to improve the appearance of the Recreational Grounds.For the area surrounding the bowling green, suitable paving was required. Due to the high level of footfall expected and the modern design of the scheme, it was important to consider hard-wearing yet aesthetically pleasing paving options.Solution Tobermore’s Fusion in a mixed palette ensured the area stood out With a modern detailed design planned, Tobermore suggested a mixed palette using a range of colours to encourage the area to stand out. Being so close to the north coast with the beautiful surroundings a touch of vibrance was suggested.Fusion, with its vibrant appearance and manufactured with sparkling natural granite aggregates was the perfect choice. The extensive range of colours helped to create a unique paving pattern for the area with a mix of Sandstone, Graphite, Mid Grey and Silver.Tobermore’s Fusion Kerb and Edge was also used. As the perfect accompaniment to the Fusion block paving, it helped to complete the area.

The Kia Oval, also known as 'The Oval' is an iconic 25,500 capacity international cricket ground of both modern and historical significance. A new three-storey spectator stand and two new roof terraces form part of the master plan to expand the grounds and increase its capacity to 28,000. Over 15,000 Ryno paving pedestals were used across the space.

Teesside-based logistics firm AV Dawson has built a new 130,000m3 warehouse specifically to store £15m-worth steel coils for a nearby international car manufacturer. With the steel at risk of ‘sweating’ and rusting in high humidity levels exceeding 65%, the company was tasked with ensuring a very specific climate for the warehouse (without which the steel would be rendered unusable), while also maintaining low energy costs.The SolutionHoward Tribick, director at local renewable energy specialist and NIBE Pro Installer HT Energy, specified, designed and fitted ten NIBE F1345 ground source heat pumps (GSHPs). Given the site is built on top of an active water table (the River Tees), Howard and the team were able to make the most of the surroundings as a natural energy source. The heat pumps collect heat from 70 bore holes, each 150m deep – a total of 10,500m of active bore hole depth. Each 60kW GSHP is paired with its own ventilating unit and 500L NIBE UKV buffer tank – producing a total output of 600kW. Solar panels on the roof provide an additional 220kW to help meet the warehouse’s electricity needs.ResultsWith the ten GSHPs now fully operational, the results have been even better than expected – with a seasonal performance factor (SPF) of 3.65 and average humidity levels of just 47%. Interconnected with 3km of header pipes, the GSHPs are spaced equidistantly along one side of the 264m-long building. The units are set up as separate systems, so they can work independently of each other or together as required. This provides an added level of security for the customer, ensuring the system can cope at all times and the steel is kept at optimum conditions.Customer Testimonial“This system made perfect commercial sense for us. While the initial outlay was greater than some of the other alternatives, GSHPs provided the most cost-effective solution by far in the long term. In fact, compared to natural gas, we will be making an impressive energy saving of 1.58 million kW/h each year. Our projected payback period is just ten years and we’re also benefiting from Renewable Heat Incentive (RHI) payments for each unit of renewable energy we’re generating.”Gary Dawson, managing director, AV Dawson

Hexham and Northern Mart is an auction house in Hexham (25 miles west of Newcastle), specialising in the sale of livestock and cattle to farmers across the North East of England. The business decided it was time to replace its old gas-fired heating system with a more sustainable alternative – one that would not only reduce energy consumption and running costs, but also earn additional income through the Renewable Heat Incentive (RHI). Minimising impact on day-to-day operations during the transition was another key consideration. Managing director Robert Addison tasked renewable energy specialist and NIBE Pro Installer Calibrate Energy Engineering with finding the right solution to meet the heating and hot water demands of the 112,050sq ft building.The SolutionThe team at Calibrate specified, designed and installed a 300 kW renewable heating system made up of five 60 kW NIBE F1345 ground source heat pump (GSHP) units. They paired this with a 50 kW solar PV array, fitted to the roof of the main pen area, which partially powers the NIBE GSHP system. The in-ground heat collectors required for the GSHP were laid in the fields around the buildings, with the controls units sited in a prefabricated plant room to the rear of the premises. The installation took just three months from start to finish, and during this time it was business as usual for Hexham and Northern Marts.ResultsDocked together in a cascade for greater output capacity, the five NIBE F1345 GSHP units now meet 95% of Hexham and Northern Marts’ 394,000 kW/h annual heating and hot water demand. Meanwhile, the 50 kW solar PV array generates enough free electricity to offset a significant 50% of the power needed to run the GSHP system. Hexham & Northern Marts is set to make a 236% return on investment – reaping an estimated £862,000 in energy savings and commercial RHI payments over the next two decades.Customer Testimonial“We couldn’t be happier with our new renewable heat and power sources. As well as delivering instant reductions in energy usage and subsequent savings on heating bills, the NIBE GSHP solution is providing us with a steady stream of income for the next two decades, thanks to the RHI. The power produced by the solar PV panels is an added bonus, and makes running the heat pump system even more cost-effective.“As a result, we’re expecting to see returns of more than double our original investment over the next 20 years – which is absolutely invaluable from a business point of view. Not only this, but we’ve got an efficient, reliable renewables setup that’s fit for the future, and will continue to deliver ongoing savings for years to come.”Robert Addison, managing director, Hexham & Northern Marts

Ashdown Forest in East Sussex is a major destination for horse lovers, with several stables and riding schools amidst miles of bridleway. Clark-Drain supplied drainage solutions to one of the forest's prestigious equestrian centres, which is undergoing development of its visitor amenities.The centre has installed 3,000 square metres of new paving and parking areas, along with other upgrades to its facilities. Contractor Codrin Iordache of Cody Building took the opportunity to use Clark-Drain’s new HD-PE Technodrain solutions for the first time. Codrin says: “I was interested when I heard about Technodrain as an alternative to the polymer concrete drainage channels we generally use. Technodrain seemed to combine value with meeting all our technical specifications.“We found that the lightweight system is easy to handle. It’s also clear that, despite being light, the drainage channels have all the strength required.”All the Technodrain channel installed at the centre is in fact load rated to D400 and able to accommodate vehicles up to 40 tons. This means the area is equipped to handle even the biggest horseboxes, including HGVs carrying up to nine horses.Channels of two sizes were sourced from the range for this project:1. An external depth of 210mm, internal width of 100mm and max through-flow of 8.25 litres per second. 2. An external depth of 310mm, internal width of 200mm and max through-flow of 42.6 litres per second.Integrating sump units with channel drainageAlso supplied were several Technodrain sump units. These remove silt from the surface water, preventing dirt and debris from entering the drainage system and causing blockages. Codrin says: “I was impressed by the sump units. As with the channels, the galvanised steel edging made it simple for us to integrate them with the 80mm paving. They also feature grating that bolts in place, which is really easy to remove for maintenance inspection and cleaning of the unit and the channels.“The design of the Technodrain system also means that it’s easy to connect units together. Simple tongue and groove joints allow for the installation of channels with a ready-mounted grating, saving time on site and providing accurate connections. We will definitely be using Technodrain again on future projects.”Cody Building sourced the Technodrain products through the Tunbridge Wells branch of Professional Building Supplies, who specialise in drainage products as part of their wider range. Terry Hallett says: “We have been talking to customers since Clark-Drain introduced the Technodrain range and have had a really positive response. People like the value the range offers, and the fact that the light weight makes the units easy to handle.“The light weight is also good for us as a merchant. It makes this product sustainable to transport, and the HD-PE construction means there’s less likelihood of channels cracking in transit. It will also make storage at our central warehouse and branches simpler, with fewer issues around safe handling to deal with.”WHY THESE PRODUCTS WERE CHOSEN:Value - Technodrain consistently adds great value to excellent specifications.Load ratings - units chosen for this project were rated at Group 4 (D400), suitable for HGV parking. Robust - the HD-PE (high density polyethylene) channels and sump units are resistant to a wide range of acids, salts and hydrocarbons.Ease of installation - the 210mm deep channels used in this project weigh just 15kg each, including the ductile iron grating and galvanised steel edge.System integration - products in the Technodrain range connect easily together using simple tongue and groove joints.

When it comes to residential, commercial or any structure below ground, waterproofing is a critical component within the construction process for protecting and preserving a building. A poorly designed or installed waterproofing solution can fail leading to significant implications on the structure itself.Delta Registered Installers, Abtech (UK) Ltd were called upon to give assistance on a particularly technically complicated project where approaches to waterproofing design and installation had been incorporated, however the system had failed. For a great remedial waterproofing outcome, seek assistance from an experienced waterproofing company to inspect your site and carry out the remedial work.The property when built had a Type C, cavity drain membrane systems incorporated (not a Delta System), however there was no basement drainage incorporated into the design to manage water ingress.In principle a Type C, drainage system is a water management system. The Type C system is used to control water ingress once it has penetrated the structure.  Moisture or running water travel behind the Type C membrane within a controlled drainage system. A Type C System isn’t classified as a barrier but provides protection by means of water management. For a Type System to be successful a suitable drainage system is required to collect and discharge water ingress to a suitable and safe evacuation point (either by natural forces or a mechanical pump system).When correctly installed, groundwater drainage channels effectively relieve hydrostatic water pressure in the below ground structure. They are installed below flooring membranes at the floor/wall junction.

IKO Permatec, developed by IKO PLC, is a highly advanced and innovative hot melt waterproofing system, which provides environmental benefits as well as market leading performance. Providing zero wrapper waste, lower application temperatures and anti-root protection, the product provides many operational advantages. It is also manufactured in the UK, with a dramatically lower carbon footprint than imported systems.

500 linear metres of ULMA drainage solution have been installed in P5 long-stay car park at Lyon-Saint Exupéry airport.

The new Leicester City Football Club Training Ground redevelopment project is now ready for the new season. The world-class training ground sits in a massive 185-acre site featuring hotel-style accommodation.Location: LeicestershireContractor: McLarenArchitect: KSS ArchitectsAspex supplied: Ironmongery, Novista Sliding Doors

JT Atkinson, a family owned independent builders' merchant in the North of England, needed a lightweight yet robust drainage solution for their new branch in Stokesley. They required a reliable and durable solution which would be installed quickly, to ensure their 30th branch opened on time.  The branch yard would be a highly trafficked area, so the JT Atkinson team were seeking a drainage solution that could withstand large loads and constant heavy traffic of forklift trucks and articulated lorries.Technodrain is an advanced, linear drainage channel, providing versatility whilst being economic, light and quick to install. Constructed of High Density Polyethylene (HD-PE), it delivers long life with low whole-life cost. Having used Clark-Drain products at their other branch sites, the JT Atkinson team knew first-hand the quality of Clark-Drain’s products and customer service.Designed for surface water management, the versatility of Technodrain enables it to be used across all construction environments as a light, robust, solution for run-off surface design. Technodrain’s size-to-weight ratio maximises its savings in transport and installation costs, and this installation was within the limits set by the HSE manual handling guidelines for a one person lift.Chris Gilbertson, Project Manager for JT Atkinson, says: “We were looking for a quality drainage product which would be easy to install, able to withstand F900 loads, and be long lasting. Technodrain from Clark-Drain is the ideal solution and doesn’t disappoint. Not only does it provide us with the drainage we need at a competitive price, the installation was extremely easy thanks to its lightweight nature.”Technodrain was installed at the Stokesley branch of JT Atkinson in October 2019.WHY THIS PRODUCT WAS CHOSEN Hard wearing – Constructed of High Density Polyethylene (HD-PE), Technodrain delivers long life with low whole-life cost.Easy to install – Tongue and groove joints allow for ease of installation and the connection of multiple channels. Preformed lateral and vertical channel outlets also provide quick and easy connection to discharge pipes.Cost effective – whilst providing a safe environment and a highly efficient system for surface water clearance. BS EN1433:2002 – Load handling performance is rated at 90 tonnes, making it durable with strength to spare in an area used by a range of vehicles from forklift trucks to artic lorries.Hydraulic performance – With maximum through-flow of 8.25 litres per second and a water way area of 372cm2, it has more than enough capacity for JT Atkinson.Bolted locking system – Technodrain features a bolted locking system, with 4 bolts in every 500mm to avoid grating movement.

South Lanarkshire College (SLC) in Scotland has opened a new, ‘zero-energy’ teaching block on its East Kilbride campus. Specifically designed with first-rate environmental credentials in mind, it boasts a whole host of efficiency-enhancing measures – including highly insulated floors, walls and roofs, triple-glazed windows, low-energy lighting and electrics, rainwater harvesting and solar PV panels on the roof. The college approached NIBE Pro Installer Anderson Floor Warming and Renewables in search of a system that would meet the heating requirements of the eight-classroom block in the most sustainable, cost-effective and reliable way possible.The SolutionSLC already has a range of NIBE products in its on-site renewables training centre, which students use for practical sessions, so a heat pump from NIBE was the natural choice to heat the new block. Mike Anderson, director at Anderson Floor Warming and Renewables, specified, designed and fitted a NIBE F1345 40kW ground source heat pump (GSHP) system to complement the building’s water-based underfloor heating, which operates at similarly low flow temperatures.ResultsNow up and running, the NIBE system is so efficient that it has been awarded a rating of A+++ in line with energy labelling criteria under the ErP Directive. SLC’s new teaching block has become the first building in the UK to achieve a BREEAM sustainability rating of ‘Outstanding’, with the facility excelling in all 10 assessment categories – from energy, waste and water to health and wellbeing.Customer Testimonials“We pride ourselves on our forward-thinking approach to sustainability at SLC, and we couldn’t be happier that our new teaching block has been deemed ‘Outstanding’ by BREEAM assessors. The NIBE heat pump system and the solar PV panels combined generate enough renewable energy to meet the block’s entire heating and power needs, making it a ‘zero-energy’ building. It really is a huge asset to the whole college – not only from a resource point of view, but also as a real-life example of sustainability in action. As well as being a valuable learning space for our construction and energy students, it’s a place for us to bring local businesses and community groups, and showcase the benefits of low-carbon, low-resource buildings first-hand.”Stewart McKillop, principal at South Lanarkshire College

Project:Surespan manufactured and supplied a series of fire escape hatches at Portugal’s €950 million underground Metro in Porto. The huge double-leaf hatches automatically open if the fire alarm system is activated to allow passengers safe exit to ground level. In addition, they can be manually opened with the touch of a button. This project was undertaken after Surespan successfully carried out similar work at Athens Metro.

The Leeds Arena, when completed, will be a 13,500 capacity entertainment focused arena. BLUCHER® have supplied over 70 drains from their adaptable range of floor drains for the concourse, plant room and kitchen areas. BLUCHER® also supplied BLUCHER® EuroPipe, their push fit stainless steel drainage pipework system which was installed in the kitchen and conference areas. BLUCHER® EuroPipe was specified over other metallic or plastic systems for two specific reasons, due to the potential heat of the waste to be drained through the pipework and A1 fire rating of the exposed pipework in general.

Project detailsBurnley’s new development of a 73,000 m2 area with a brand-new dedicated training centre, brings first class facilities for the first team, development squad and youth team players under one roof for the first time.Project overview This new indoor all-weather area with a small spectator gallery, to meet the requirements of the Elite Player Performance Plan. GDL were appointed to manufacture and install the natural ventilation turrets.Benefits of using GDL Products on the project ·     GDL Natural Ventilation turrets are manufactured to any size or ventilation requirements ·     Bespoke products manufactured at our Glossop and Sheffield facilities ·     We offer full turnkey packages from design and manufacture to delivery and install.