"multimedia presentation systems"

refurbishment project posed particular challenges in respect of the flat roof, which consisted of a solid concrete deck, followed by screed laid to falls, a thin dense concrete layer and three bituminous membrane layers. The new roof specification required the application of new insulation to upgrade the thermal performance and a new single ply waterproofing membrane. Due to the location of this project and the presence of existing bonded layers, adhesive application was ruled out at an early stage and a mechanically fastened solution was sought.Initial pull-out tests confirmed that fixing was required through the existing screed and direct into the concrete deck. With the roof’s high exposure rating and dimensions, wind load calculations indicated that only corner and perimeter zones should be used, which demanded a high density of fasteners in these areas.the solutions provided by SFS included its TIA adjustable fastener in combination with the isoweld® 3000 heat induction welding system. This fastener system included specially coated isoweld® stress plates combined with 230mm and 300mm FI-R-20 sleeves and the 150mm long TIA fastener. These were installed through the insulation and screed layers and were mechanically fastened into the concrete substrate.The fasteners were applied through the insulation boards in a field fix grid pattern followed by the Protan SE single ply waterproofing membrane, which was then installed using the specialist isoweld® 3000 system, welding the membrane directly onto the isoweld® stress plates. This provided an extremely secure fix, without having to duplicate fasteners, and the associated drilling, and without the need to penetrate the waterproof membrane as would be necessary on seam fix systems.

RIBA STIRLING PRIZE WINNER, Evelyn Grace Academy in Brixton South London, benefits from the flowing façade integrating seamlessly with Sotech's Optima IPC Cladding. The external facades of the academy, designed by award wining architect Zaha Hadid, feature flying angles and oblique lines and, to maximise external space the building bridges, a full-length running track. The internal design generates natural patterns of division within highly functional spaces to create four small schools within the whole, each with its own identityIn addition to partnering with the specialist contractor McMullen to identify the optimum solution for the fixing components, a scaled mock-up incorporating the Sotech Optima IPC interlocking plank system, finished to the specification required, was built on site incorporating two sections of the building integrated into the glazed curtain wall. This level of detailing provided the contractor and the architect with the reassurance that the rainscreen system, and the specified colour and finish, would meet the performance and design requirements of the project.The Optima IPC system has been independently tested by Vinci, including both horizontal and vertical planks in the material and finish specified for the Evelyn Grace Academy together with a number of other finishes including copper, aluminium and zinc. Achieving 2Kn serviceable load, the system successfully met the rigorous test requirements.The specification of the highly engineered Optima IPC for the £37.5 million Academy resulted in the bespoke manufacture of each panel, many incorporating complicated angles and tapered corners in two directions, each with a 5mm shadowgap and secret fix joint. Curved soffits and cills completed the package, which totalled in excess of 1500sqm of Optima IPC.

As described by the Woodland Trust, Glen Finglas is a great expanse of ancient woodland, lochs and open heathland, sitting at the heart of Loch Lomond and The Trossachs National Park and home to one of the best examples of upland wood pasture in Scotland.The newly constructed Gateway Building was designed to blend in with the surrounding woodlands and featured a circular timber-clad exterior with a spiralling, curved roof. The Woodland Trust approached RTA Building Limited, a Polyroof Approved Contractor, to provide a guaranteed waterproofing solution that would complement the aesthetics of the building.After comprehensive discussions and careful evaluation, we recommended the Polyroof 185 Warm Roof System for this unique project. This system stood out due to its exceptional BBA 30-year durability rating, impressive life-cycle costing performance, and an insurance-backed guarantee that offered the client peace of mind.The implementation process involved the meticulous installation of the Polyroof membrane, which flawlessly covered the flat roof areas while seamlessly following the curved perimeters and intricate spiral design. To ensure a fully waterproof edge detail that complemented the building’s contours, we installed a bespoke GRP capping. This robust combination provided Woodland Trust with a reliable and long-lasting roofing solution.Through our collaboration with Woodland Trust, we successfully implemented the Polyroof 185 Warm Roof System, delivering a durable, and cost-effective roofing solution. Our system’s exceptional durability rating, long-term life-cycle costing performance, and insurance-backed guarantee provided Woodland Trust with the confidence that they had chosen a roofing solution that would stand the test of time. With Polyroof, Woodland Trust achieved a seamless, reliable, and environmentally conscious roofing solution for their unique project.

Case study of a Commercial Glass Balustrade in London. Waterloo Station in London is a key transport hub for the city and one of Britain’s busiest train stations with 99.4 million journeys each year.It’s also the largest train station in the UK, with more platforms and floor space than any other. The station is therefore, subject to regular overcrowding during peak times. This also means that any installations or upgrades to the infrastructure require careful consideration. This is to ensure that the improvements meet the appropriate health and safety measures.The client knew that they needed to install a commercial glass balustrade, in central London, so they approached Pure Vista. As specialists in this type of project we were able to provide a suitable solution using our MEGAgrip or BLASTguard balustrade systems. Pure Vista were able to propose two solutions for this project.There were two options, either they could opt for the MEGAgrip balustrade system, a commercial-appropriate system with up to a 3.00kN loading capacity (as specified by UK building regulations BS 6180:2011 for this type of installation). Or, the second option is using BLASTguard, a fortified version of Mega Grip. This has been successfully tested to withstand a bomb blast and is ideal for areas that may be susceptible to terror attacks. Since MEGAgrip can easily be turned into BLASTguard using a simple converter-kit, Waterloo Station opted for MEGAgrip at this installation. However, they do still have the option to convert this into a bomb-resistant system in the future.The pictures below show our MEGAgrip balustrade in situ in Waterloo Station along side train tracks being used as a safety barrier. The sleek looking design fits well with the overall look of the station and blends in nicely with the location. 

THE PROJECTThe Safety Letterbox Company has collaborated with the high-end housing developer, Mulberry Homes, to install a succession of its intelligent parcel management systems across five of their sites. Futureproofing their developments by lowering carbon emissions to hit the UK goal of net-zero by 2050.Established in 2004, Mulberry Property Developments is a privately-owned company that builds both residential and commercial property across the wider Midlands.THE PRODUCTMulberry has recognised a need to future proof their developments and provide parcel boxes to both lower carbon emissions whilst offering a convenient facility to their new homeowners. The intelligent parcel boxes will bring peace of mind to those living on the Mulberry sites by knowing they no longer need to wait at home for a delivery, and that they have a 24/7 facility to inform them their parcel is safely stored.The myRENZbox app allows those living at the Mulberry Homes sites to experience streamlined management of deliveries and returns at a centralised location. The systems are situated outside in a purpose-built area at the entrance of the housing developments to allow easy access for delivery personnel to deposit packages. The location is also a convenient passing point for residents on their way home.Both sites have opted for the modula system, therefore, can add additional parcel boxes overtime when the demand increases.myRENZbox has worked with Mulberry Homes to offer a finished product that is in line with its marketing guidelines and that fits with the overall look of its high-end developments. The system was powder-coated with their signature green and the logo design finished in gold vinyl. It is a striking addition to the housing developments that helps to enhance the company’s brand.

Mono M310/M311 Glass InfillSt George’s junior school is an independent Roman Catholic school with a high standard of facilities. Construction of ‘The Ark’ provided a new early years teaching block, which includes modern classrooms, a dedicated IT suite, a new assembly room and outdoor learning areas. The two-storey building has a staircase at each end and Delta Balustrades’ Mono™ system was specified with powder-coated steel balusters and 11.5mm toughened and laminated glass infill panels. The Mono™ system handrails were provided in oak to offer a warmer finish in the primary school environment and each staircase features a dual handrail with one handrail mounted at a 600mm height for the children and the other in parallel at 900mm for the teachers. The Ark features an outdoor teaching area at first floor level with a balcony accessed from the internal classrooms. Once again, Delta Balustrades’ Mono™ system was specified with powder coated balusters to match the grey of the window casings. The 11.5mm toughened and laminated glass infill panels have no handrails but have been installed at a height of 1500mm to provide additional edge protection. A further small triangular balcony at the side of the building has been specified with the same system as the main first floor balcony. At ground level, the building features steps and ramps and a combination of Mono™ balusters and Orbis™ handrails with a Sigma stainless steel finish have been used to provide guarding, with 10mm toughened glass infill panels.Finally, the stone steps leading to the nursery classrooms were specified with an Orbis™ handrail.

Den CourtBauder Thermofol single ply waterproofing systemSynopsisConstructed in 1977, Den Court is a large retirement home made up of 24 flats in the small town of Lochgelly in Fife. The regeneration of the sheltered housing by Fife Council involved the demolition of part of the building as well as replacement windows and doors, landscaping and a new car park.Bauder Building BoardProject:Den Court Care Home, CardendenLocation:Lochgelly, Fife, ScotlandProject Type:RefurbishmentRoof Area:1200m²Specifier:Fife CouncilApproved Contractor:Greenroof UKThe specificationThe client was clear that lead effect rolls were essential for this projects roof. In order to achieve this whilst keeping with the original roof of the building and with the other buildings of the area, Bauder’s Thermofol PVC system was specified and approved contractor Greenroof (UK). The resultDuring installation, the approved contractors hand-crafted over 2,000 linear meters of timber battens wrapped in the Bauder THERMOFOL U15 Fleece Back waterproofing membrane. These were then installed on to the 1200m² roof area.Thanks to the hard work and craftsmanship deployed by the approved contractor and the high-quality products used on the project, following a roof inspection from an expert Bauder Site Technician and a leak test, Bauder was able to issue a 20-year product and workmanship guarantee to the roof. System installedBauderThermofol single ply waterproofing system1 Bauder THERMOFOL U15 V FR1.5mm fleece-backed reinforced PVC membrane2 BauderPIR MTissue-faced flatboard insulation3 BauderTEC KSDElastomer bitumen air & vapour control layer, self-adhesive membrane

60-70 St Mary Axe is an office building designed by London-based architectural firm Foggo Associates with retail space on the ground floor. It is located in thearchitecturally ultra-modern financial district of the City of London in close proximity to the iconic 30 St Mary Axe, also known as "The Gherkin," whose facade was realized byLindner. Also, the new building is nicknamed: "The Can of Ham" in its semi-elliptical shape reminiscent of the packaging of English canned ham. The 360° view through the vaulted, all-glass façade offers a great view of the city of London. The BREEAM Excellent building offers 28,000 m² of office space, spread over 21 floors and designedto meet a wide variety of needs.Lindner Interiors contributed to the construction with interior fit-out products. These include the suspended ceilings for the "A" category office rooms on the 3rd, 9th and 12th floors, and the luminous ceilings at the reception and in all elevator anterooms.The Lindner fire grid ceiling system LMD-B 100 with linear grid arrangement was installed on two floors, while on the third floor, light strip modules were chosen instead.These complete the appearance of the iconic building in an impressive way. If required, LMD-B 100 partitions can be attached to the Lindner ceiling system so that the office space can be individually divided. With its radiant fire grids and trapezoidal ceiling tiles, the system is perfect for the sweeping silhouette of the 60-70 St Mary Axe building.Completed Works:F0 Metal ceilingLMD-B - Post cap ceilingsLuminous ceiling/luminous canopyLuminous ceilingsCertification systemBREEAM

Client: Durham County Council Main Contractor/Manufacturer: Retro Bridge Specialist Contractor: St Astier Consulting Contractors Main Products Used: Emseal BEJS SystemThe Witton Park Road Bridge near Bishop Auckland crosses the River Wear at the same place as the historic Witton Park Railway Viaduct, but at different angles. The main central bridging structure was being replaced as the old structure had deteriorated and become structurally unsound. The new prefabricated replacement section of the bridge is a Retro Beam Bridge design, made from thermally galvanised steel for long term durability and is 64 metres long, with a single-lane road carriageway plus a cycle path. The new bridge section was installed in just 3 days through the Victorian brick arches of the Viaduct by Retro Bridge. Then the teams from Durham County Council and St. Astier Consulting Contractors were able to work on the bridge deck expansion joints at each end, to ensure that these had an equally durable, watertight seal. To do this quickly and efficiently, as well as ensuring the long-term durability of the exposed joints, they selected the Emseal BEJS System provided and supported by NCC (Movement Joint Systems). The Emseal BEJS System can handle harsh environmental conditions and has greater movement capability, better low temperature flexibility and higher temperature stability than other joint movement technologies. In a single installation, BEJS provided a watertight durable seal, with a joint movement capability over 100%, including 3-dimensional movement, plus it required no invasive mechanical anchoring as it is bonded in position.

Cladding of the newly constructed RVH maternity unit in Belfast, using Spanwall’s own RF50 Rainscreen system the new Maternity unit will be clad with a combination of 2mm Corten Steel and 1mm zinc

The private roof terrace at former Edwardian-era printworks 'The Factory' is transformed with Ryno PaveRail™ Non-combustible Paving System taking centre stage, supporting large porcelain tiles.

The StoRend Flex external render system, which utilizes the StoVentec carrier board, has been applied as a finish to the upper storey of this new contemporary house, designed by Ström Architects of Lymington.

Lululemon specified ARDEX polished Concrete Topping (PCT) as it gave them the complete freedom to accomplish almost any design they desired whilst still offering a durable retail floor system.

The Key Theatre in Peterborough’s city centre combined Bauder’s reinforced bitumen membrane waterproofing system and sedum blanket green roof finish with a photovoltaic solution, which the council’s contract manager.

Timber curtain wallsThe use of wood-alum systems and large glass panes allow for the creation of amazing design features that will bring light and the feeling of space to rooms of all shapes and sizes.

In the new Ceramic Tile Distributors (CTD) showroom in Woking, Surrey, tile products by Saint-Gobain Weber have been specified for their new 400m² sales facility which includes an extensive showroom and trade counter.Relocation of Ceramic Tile Distributors (CTD) from their original showroom on the junction of Goldsmith Road and Church Street West to Kestrel Road a few miles away was brought about by the £150m redevelopment of Woking town centre."The relocation of CTD has not presented a problem," says Rob Stevens, manager, CTD Woking. "The showroom looks brilliant – it's bigger and better, and our trade custom has definitely increased. We also attract lots of private customers who enjoy the simplicity of the large sample displays and the huge variety of tiles for every location."Several site visits were made by Weber's tile specialists to inspect the floor substrate and identify the appropriate materials. The floor was prepared with weber PR360, a multi-purpose priming solution suitable for most building substrates including wood, anhydrite, plaster and cement/sand screed. This primer regulates the porosity of the substrate and improves adhesion and the flow of levelling compounds.High performance, fibre-modified weberfloor flex was then applied which is a self-smoothing and self-levelling compound suitable for most substrates. It has rapid setting qualities and can take light foot traffic after just 3 hours. It is also one of the many products in the Saint-Gobain Weber range to feature Low Dust Technology™ which makes it cleaner and more comfortable for the applicator to use.Large format GEMINI Young Stone tiles in grey were set with weberset rapid plus ECO which is a very rapid strength tile adhesive for low porosity tiles, such as ceramic, porcelain and natural stone, and has been specifically developed to allow easy bedding of large format tiles. It is suitable for use on solid substrates and is ready for grout in only 2 hours. The new ECO formulation contains cement replacement technology which reduces the product's environmental impact of initial excavation and contributes to a significant reduction in transportation costs.The CTD Woking showroom floor was grouted with weberjoint wide which is suitable for very wide joints from 2-20mm. This is a cement-based floor and wall grout which gives a coarse textured finish. It has the added benefit of Mould Stop Technology which ensures lasting protection from mould growth, it's also abrasive-resistant and available in seven colours.As part of Woking's redevelopment, the bandstand, fire station and market place will all be demolished to make way for a new complex featuring shops, apartments, parking and a hotel. On the old CTD site a brand new state-of-the-art fire station is to be developed providing additional space and working areas for the crews and an improved training facility.

Unrivalled in scale in the UK as a hub of engineering and material science expertise, the new Manchester Engineering Campus Development (MECD) embraces the refurbished, Grade II listed Oddfellows Hall, the MEC Hall and buildings on Upper Brook Street and York Street. Brick played a crucial role in creating the campus and, to find the perfect products to fulfil their aesthetic vision, the architects turned to Vandersanden.The new campus is one of the largest construction projects undertaken by any higher education institution in the UK. It will allow 1,300 staff and 7,000 students to work and study in spaces that enable connection, collaboration and concentration across the faculty.Working with Mecanoo, Penoyre & Prasad and Balfour Beatty Construction, BDP provided detailed design consultation services for the entire MECD project. The collaborative team completed the sensitive renovation and extension of Oddfellows Hall to accommodate a suite of conference rooms, academic workspaces and a restaurant.Originally built in 1857 and rebuilt in 1916, Oddfellows Hall anchors the new MECD to its formative past. Set back on the north side from the listed building, the modern extension presents a neat facade where Vandersanden’s Berit water-struck facing brick, which is white with a light texture, is coupled with areas of glazing and tile. “The approach to the scheme has been to add a twenty-first-century building of its time but in continuity with the existing language, using materials such as brick and glass,” explains Paul Owen, architect associate at BDP.Configured horizontally, the elements wrap around the façade of the extension to create a strong connection to both the north and south facades of the older building. The aesthetic is enhanced further by a combination of narrow brick piers and vertically proportioned windows. A defined brick plinth at ground floor level achieves additional visual interconnection between the old and the new.On the roof, the plant enclosure uses the same Vandersanden Berit brick as the façade, but the structure is set back from the parapet line. A hit and miss pattern allows for ventilation of the mechanical and electrical equipment inside as an elegant alternative to standard ventilation grilles.On Upper Brook Street and York Street, the new buildings are of solid brick that includes feature brick vertical and horizontal elements to articulate the façade and frame the window openings. Again, the brick is from Vandersanden; in this case, the company's Herning water struck brick with a dark brown-purple-blue multi-coloured appearance.“The technical advice the team at Vandersanden gave was incredibly helpful while the bricks offer great visual appeal. In the long term, they will age gracefully in combination with the existing material of Oddfellows Hall, ensuring the new extension sits well in its context,” says Paul Owen.For more information on the development go to https://www.mub.eps.manchester.ac.uk/science-engineering. For details on BDP visit, www.bdp.com and to find out more on Berit, Herning and the wide range of high-quality bricks available from Vandersanden, visit Together we build greatness | Vandersanden

A combination of factors, including high winds, freezing temperatures and widely varying stud centres led award-winning walls and ceilings specialist Sound Interiors to Euroform’s cement particle board, Versapanel.The Project: Gogarth School (Ysgol-Y-Gogarth), LlandudnoMain Contractor: Willmott Dixon ConstructionSubcontractor: Sound Interiors LimitedProduct: VersapanelSize: 1200mm x 2800mm x 12mmQuantity: 2,500 square metresThe ChallengeGogarth School (Ysgol-Y-Gogarth) is situated less than 300 metres from Llandudno Bay, with no barriers or windbreaks between it and the sea, making exposure to the elements particularly problematic. What’s more, the UK’s weather is becoming increasingly harsh and unpredictable. According to Met Office statistics, 2012 was the second wettest year since records began. And March this year was the coldest since 1962.John Sheeran, Contracts Manager at Sound Interiors Limited, said, “The biggest challenge of the project was the weather conditions we encountered over the nine-week programme. We were informed of the temperature dropping as low as -12 degrees on some occasions, not to mention the prevailing winds. On a few occasions our supervisor and I had no choice but to take the decision to abandon our works.”  John continues, “In addition, the majority of the steel framing we had to fix our boards to ‘installed by third parties’ had massively varying stud centres.”The SolutionBy specifying Euroform’s Versapanel, the fully external cement particle board, both challenges were overcome.Stud CentresThe varying stud centres issue was easily addressed by the availability of Euroform’s Versapanel in a 1200mm x 2800mm size. “Using this size board reduced waste that would normally be generated when using a 2400mm x 1200mm board,” said John.The problem presented by the inclement British weather and the close proximity of the sea was also resolved by Euroform’s Versapanel.Heavy RainfallThe British Research Establishment Centre for TimberTechnology and Construction, in their BRE Digest 447 Part 3, recommend cement particle board ‘where there is a special requirement for moisture resistance.’This requirement for moisture resistance doesn’t simply apply to a board’s performance in the completed building; it is also a critical factor during construction. Euroform’s Versapanel can be exposed to extreme conditions indefinitely and, even when soaked, will dry out and maintain its original robust performance.Freezing TemperaturesEuroform’s Versapanel is manufactured to BS EN 634 Parts 1 & 2, the British Standards that govern particle boards’ and wood-based panels’ tensile strength, mechanical properties, density, load factors and resistance to hard body impact. Moreover, and especially relevant to the Ysgol-y-Gogarth project, BS EN 634 Parts 1 & 2 govern a board’s resistance to frost.ConclusionA robust, versatile building board with the full support of the Euroform technical team, Versapanel proved to be the perfect solution to the challenges faced by Sound Interiors on the Ysgol-y-Gogarth project.

Traditional Heritage Timber Casement Windows - Enhancing the Charm of Maltsters Tap, ShropshireLocated in the idyllic village of Cardington, near Church Stretton in Shropshire, the Maltsters Tap is a Grade II listed former brewery that recently underwent a remarkable transformation with the installation of traditional flush casement windows. Gowercroft Joinery's expertise in crafting heritage windows proved instrumental in this project, which serves as a compelling case study for architects and specifiers seeking to preserve the timeless appeal of traditional architecture.The property's new owner, Brian Tripp, sought to renovate his acquired dwelling with windows that perfectly complemented the rustic elegance of the countryside aesthetic while providing modern-day performance. Brian first discovered Gowercroft Joinery at the renowned Grand Design Exhibition, where he downloaded their brochure and subsequently reached out to discuss his specific requirements.Traditional Heritage Casement WindowsThe Maltsters Tap resides in the heart of the village, with its focal point being the charming village church. Surrounded by postcard-perfect scenery, it became evident that the choice of windows had to harmonize seamlessly with the picturesque surroundings. As Brian explains, "When we saw the Gowercroft Heritage window at the 'Grand Designs' Exhibition, we knew straight away it was just right for our listed building renovation, both for us and for our local Conservation Officer."The renovation process involved merging the two converted dwellings into a single residence, followed by a comprehensive interior refurbishment. Comfort and traditional styling were paramount, and upgrading the windows played a pivotal role in achieving these goals. The original single-glazed windows were replaced with Gowercroft's Richmond Flush Casement Heritage Windows, meticulously selected to blend with the property's historical character while delivering exceptional thermal efficiency.To retain the traditional look, the windows feature astragals, horizontal bars that replicate the iconic Georgian window design. However, ensuring uniformity presented a unique challenge due to the varying heights of the windows. Gowercroft's skilled team meticulously calculated the glass sizes and determined the number of astragals required for each window, accounting for the non-uniform dimensions characteristic of older properties. Additionally, the double skin insulating plasterboard necessitated adjustments to the frame sections, maintaining consistent sightlines throughout the project.Heritage Casement Windows InstalledIn total, 26 of Gowercroft's Richmond Heritage casement windows were expertly installed, completely transforming the Maltsters Tap and fulfilling Brian's vision for his dream home. This successful collaboration between the homeowner, Gowercroft Joinery, and the local planning officer stands as a testament to the remarkable synergy between traditional aesthetics and contemporary performance.With Gowercroft Joinery's exceptional craftsmanship and commitment to preserving architectural heritage, architects and specifiers can confidently rely on their expertise to enhance the appeal and functionality of projects featuring traditional heritage timber casement windows.

GRCA Full member Telling Architecture Ltd demonstrates how innovative 21st Century Modern Methods of Construction can be used to replicate 19th Century, Victorian inspired architecture. The key to authenticity when replicating historic construction methods or styles, is care and attention to detail. Get it wrong and at best you create a poor pastiche of a bygone era. This was the challenge presented to Telling Architectural that required them to develop further the techniques they have already established and utilised in the design and manufacture of brick faced GRC, to create convincing complex 3D forms.This £300 million project nestled between iconic 21st century London landmarks including Tate Modern and The Shard, comprises mixed use buildings that provide offices, shops, gallery restaurant and cinema adjacent to the historic and world-famous food destination Borough Market.This project identifies heavily and sympathetically with its Victorian past. Brick railway arches have been re-purposed to integrate with the facades of retained warehouses in addition to new contemporary architecture that is weaved in amongst connecting pedestrianised yard spaces that creates a refined reimagining of a bygone age.Telling Architectural Ltd continue to innovate and develop the capabilities of Glassfibre Reinforced Concrete. The addition of real brick facings provides the Architect/Specifier with a whole new range of possibilities that they can consider as a means to achieve their creative goals. There is a huge demand for the skills of a brick mason that can replicate the standard of detail and workmanship specific to this project. Unfortunately, as a result of an ageing workforce and low intake of new tradespeople, they are in short supply and come at a premium. The construction industry has had to evolve and adapt to find a solution to this problem, in addition to having to rethink its approach about the way we build. All these issues can be addressed and remedied by introducing off-site/premanufactured innovations that remove key elements off the critical path and in so doing deliver sustainable solutions in an on-time/just-in time basis.In most circumstances the go to solution would be to utilise traditional precast concrete, however using Brick Faced GRC provides significant savings in weight and use of raw material, which in turn can lead to further added benefits in both the extent of groundworks and design of the structural frame.  For Borough Yards London project, the challenge to fabricate masonry elements that include intricate features such as faceted columns utilising cant bricks, splayed sawtooth pattern beams with brick soffit returns, the term masonry cladding falls short in identifying what has been achieved on this project - this is façade engineering of an exceptional standard. Proof indeed of the opportunities Brick Faced GRC provides, not just for contemporary architectural styles, but also as a means to maintain and preserve a part of London’s Victorian Heritage.  Client: MB Bermondsey LtdMain Contractor: Wates ConstructionInstaller: LesteroseEngineer: EvolveArchitects: SPPARC ArchitectureScope of Work: 776m2 Brick Faced GRC Grade 18P  

Brick manufacturer Vandersanden is launching a new texture generator for its facing bricks and brick slips. With the new online tool, architects, property developers and consumers can design a facade by combining, among other things, different types of bricks and brick slips, colours, laying patterns and joint thicknesses.In total, the texture generator allows more than 1.1 million combinations to be created and compared. Thanks to cutting-edge technology, Vandersanden's texture generator displays the most detailed and realistic digital reproduction of a facade texture to date. The generated texture can be easily downloaded, including image folders and technical specifications.Maximising digital opportunitiesVandersanden has been focusing on the digitisation of its offering for some time. For several years, the company has been digitising various services for different customer groups. Knowledge sharing, inspiration and convenience for customers are central to this. The new texture generator is their very latest digital innovation."With the texture generator, we are making the most of the possibilities that the digital world offers, in order to better fulfil the present and future needs of our customers. The texture generator is an endless source of inspiration for both professionals and consumers. Professionals can visualise their projects realistically in a simple way, because the texture can easily be integrated into drawing programmes", says Nathali Donatz, Group Marketing Director at Vandersanden. "With the texture generator, we make it easy for professionals and consumers to design the perfect facade and by doing so, strengthen our role as the partner for creating beautiful facades."Lifelike visualisationsWhereas most texture generators on the market make visualisations based on photography, Vandersanden embraces a new technology, namely photogrammetry. This technology enables a digital 3D image of a brick, and in a later phase also of clay pavers, to be created by means of an extensive set of photos.As a result, products are displayed with a particularly high level of detail and 3D depth. The new technology also allows for greater scalability, which means that recurring patterns are virtually impossible. All this means that textures can be visualised in a particularly realistic and natural way. Vandersanden does not compromise on user-friendliness: the tool is very simple and intuitive to use.Texture generator 2.0With its texture generator, the family business wants to go beyond the existing tools on the market."By using advanced technology, we are addressing gaps in existing texture generators. Current technology allows for less detailing and less flexibility, making textures more repetitive and artificial. With our texture generator, we want to provide customers with the most realistic image possible, so that they can perfectly imagine what their future facade will look like", says Nathali Donatz of Vandersanden.For more information and to try the texture generator visit Lifelike textures with the texture generator | Vandersanden

The Spa at South Lodge, in the heart of the West Sussex countryside, is the picture-perfect, luxury destination for those seeking ultimate relaxation in complete comfort, far away from the pressures and strains of modern life. Designed by Hove-based architectural firm, Felce and Guy, this prestigious 44,000 sq. ft building sits harmoniously in its beautiful, natural setting with external facing bricks from Vandersanden selected to provide regular form, nuanced colours and natural texture for the project. Located in Lower Beeding, near Horsham, The Spa at South Lodge is a purpose-built spa within the grounds of an award winning 5-star hotel. It features a state-of-the-art gym and spin studio, indoor pool, outdoor hydrotherapy pool and wild swimming pool, a thermal suite and treatment rooms for members, hotel residents and spa day guests. In addition, The Spa at South Lodge includes the Ridgeview Beauty Bar and Botanica, a Mediterranean-inspired restaurant. Felce and Guy were commissioned to provide a full architectural design, then appointed as lead consultant and contract administrator to oversee the build carried out by main contractor, Beard Construction. The firm’s design balances the specific needs of the hotel and The Spa at South Lodge’s facilities with a sensitivity to the context of the countryside setting and close proximity to the main hotel. The resultant architecture sympathetically responds to these surroundings with the building deep-set into the landscape, minimising its scale, yet taking full advantage of the extensive views available to guests over the South Downs. As the landscape falls away, leading to natural water forms, so too does the new building with external terracing leading out to a vitality pool and down to an external swim pond. After reviewing and testing different samples in advance, Felce and Guy selected Vandersanden’s Lithium brick in a 50mm size for the project. This attractive, hand-formed facing brick comprises a sanded-coated and grained structure in a muted base grey colour with accompanying shades of buff and black to match the stonework colours of the main building at South Lodge Hotel. Over 100,000 bricks were sourced and supplied for the project by specialist brick distributor, N R Taylor of Lingfield, with the thinness of the brick helping to further reduce the visual scale of the Spa building. The horizontal lines of the brickwork act as a softening counterpoint to the vertical natural green oak cladding and large glass panelling that also feature as key elements in The Spa at South Lodge design. Elsewhere, the Lithium brick has been used in the copings, landscaping and dividing walls which create external contours and help to separate the terraces outside of the building. “The Vandersanden brick works with the other materials in the design to present a very organic aesthetic for The Spa at South Lodge,” says John Chapman of Felce and Guy. “It perfectly complements both the dark sandstone used in the original hotel and its mix of greys and brown as well as the natural surroundings. The straight, clean-lines and regular shape of the Vandersanden brick, together with the raked joint we’ve used, has helped emphasise the horizontality of the building and works especially well with the textured finish of the timber panels. As a practice, we set very high expectations which the Vandersanden bricks have undoubtedly satisfied.” In addition to a curving, meadow-grass roof, which helps to attenuate rainwater flow, the Spa at South Lodge benefits from other sustainable technologies and finishes. A biomass boiler system has been installed, and all drainage is contained on site, using reed bed technology. The existing ponds within the hotel grounds have been modified and extended to benefit the local ecology. Vandersanden itself is building a sustainable future for its business, having already invested in renewable solar and wind energy technologies at its major European production plants and committed to a pathway which will see the manufacture of CO2-neutral bricks by 2050. Underlining the significance of the project to the hotel and its management, every member of staff laid one brick as part of their contribution to The Spa at South Lodge. To find out more about the bricks used in this project or to see the wide range of high-quality bricks available from Vandersanden, click on the 'View more' link 

Radmat has supplied a comprehensive range of systems for 20 Fenchurch Street, AKA the ‘Walkie Talkie’, in the City of London. Radmat’s PermaQuik, ParaFlex and EshaUniversal roofing membranes were installed during the creation of the Sky Garden – one of the highest green roofs in the world, offering breathtaking views over the capital.Designed by world-renowned architect Rafael Vinoly and jointly developed by Land Securities and Canary Wharf Group, 20 Fenchurch Street is constructed with impressive sustainability credentials to achieve an ‘Excellent’ BREEAM rating. The 38 storey tower incorporates a vibrant garden spanning the top three floors which is open to the public and by appointment. Described as the terraced ‘hanging gardens of modern Babylon’, the fifth-of-an-acre garden utilises drought resistant Mediterranean and South African flowers, shrubs and ferns, in soil up to a metre deep. The gardens also provide Rosemary, Thyme and other herbs to three restaurants within the building.Now London’s highest public park, the publicly accessible roof gardens include a viewing area, terrace, café, bar and restaurant. For such a unique space, it was crucial that the roofing system chosen delivered thermal performance, watertightness and long-term reliability for the client – specialisms of Radmat products. Land Securities and Canary Wharf Group awarded the work to Radmat on the basis of the company’s established reputation and expertise in all types of flat roofing.For the pitched green roofs, sectioned into a series of individual 45° slopes, EshaUniversal waterproofing was specified as part of a Radmat roofing system that included insulation and drainage layer. Made from recycled materials and 100% recyclable – EshaUniversal proved ideal to meet the demands at this sustainable development.Offering an efficient and safe installation, EshaUniversal is ideal for green roofs. More durable than elastomeric roofing, the system is also weather proof, UV stable and offers flexibility, durability and high puncture resistance making it ideal for challenging applications.Project Manager, Paul Nelson, said: “We have installed waterproofing systems over the concrete decks from ground up to second floor level then levels 34, 35, 36, 37 and 38. This required our installations teams to make repeated visits to site, using both internal and external hoists for access; with work completed in March 2014.”“The inverted roof arrangement means the waterproofing is covered by insulation and either paving, ballast or planted medium,” he added. “Then there is also the sky garden at an angle of 45 degrees planted with trees and shrubs, which will be accessible to clients using the restaurant there.”For public-access terracing across levels 34-38 – as well as a series of applications on the Ground Floor, second floor and the concrete staircase – over 1,200m² of Radmat PermaQuik PQ6100 was applied. With an independently verified durability ‘for the lifetime of the building’ and a market leading guarantee, the liquid-applied PQ6100 waterproofing system delivers exceptional performance befitting of this unique build.On level 37, where visitors can enjoy 360° views of the capital, additional waterproofing was required following the installation of a glass internal cladding system. With the glass already in place and challenged by high winds and low temperatures, the fast curing, cold applied ParaFlex waterproofing system was specified. Suitable for application at temperatures below zero reliable sealing can even be achieved at -5°C. Utilising collaborative working practices and a responsive and interactive design process, Radmat have created a stunning waterproofing and green roof application of the highest standard. Radmat’s proven range of waterproofing solutions met all the client’s demands and has ensured that visitors from all over the world can enjoy this stunning venue for many years to come.

Pavement Shifting Protection for Roads in SouthwarkIn recent years, Southwark Council encountered problems creating and maintaining attractively paved surfaces in busy carriageways.David Farnham, Highways Design Quality Manager at Southwark Council, explained: “Southwark boasts some of central London’s great destinations – from the tourist sites around London Bridge, Tower Bridge and Bankside, to vibrant neighbourhood centres like Peckham, Camberwell and Dulwich. The quality of our streets is a big part of the appeal, and residents and visitors expect them to be attractively landscaped and well maintained.“Installing paved areas in roads at crossings and junctions helps provide that quality of place whilst also having a calming effect on traffic. This is something we support as part of a tool-kit of shared space design measures. However, it poses some real design and maintenance challenges.”David Farnham, Highways Design Quality Manager at Southwark CouncilWhilst the trend in central London over recent years had been to install natural stone sett surfaces within a rigid construction system, Southwark Council found this to be too costly for most locations and difficult to reinstate. Meanwhile, complex detailing was needed if all too common defects were to be avoided, even under moderate traffic. The Council identified concrete block surfacing, used within a flexible construction system, as a potentially simpler and cheaper alternative – provided certain requirements could be met.David Farnham commented, “We wanted to replicate the appearance of modern natural stone surfaces as faithfully as possible. In order to look the part, any concrete blocks had to be capable of being laid in stretcher bond on busy roads. That’s difficult with a flexible system as a herringbone bond is typically needed to increase surface interlock and prevent individual blocks from shifting. If not avoided that can lead blocks to work lose and the surface to rut. Also, in order to have a traffic calming effect we needed blocks to be quite large and to have varied finishes so approaching drivers would notice them. Traditional 200×100 concrete blocks weren’t compatible with these needs.”Tobermore introduced Southwark to their solution – the City Pave VS5 block paving system. The innovative product incorporates shift protection on five sides of each block via interlocking nibs and a specially profiled bottom surface that claws sand beds. These innovations provide continuous protection against shifting from horizontal and vertical loads, all within a traditional rectangular shaped block. The system even outperforms other interlocking blocks often used in goods yards and other heavy load areas. It gives designers the freedom to use flexible construction systems with confidence – even when laying blocks in stretcher bond on busy roads.City Pave VS5 also offers a hard wearing granite aggregate surface layer that produces a striking finish, similar to the appearance of natural granite. As well as the aesthetic appeal, the hard wearing surface layer improves the strength and durability of the product.Southwark Council specified the product in a mix of Silver, Mid Grey and Graphite colours to mimic the natural variability of stone. The combination of the three product colours and the larger element 300x150x100mm size of the City Pave VS5 block was used to create the desired ‘traffic-calming’ effect.City Pave VS5 was installed on streets across the borough, including Camberwell Green, Borough High Street and Blanchedown Road – typically as part of raised table features at junctions and crossings.David Farnham said, “Overall, the City Pave VS5 system helped to substantially reduce construction costs compared with rigid stone sett construction systems. Visually, the stretcher bond, mix of top finishes and large module sizes has been very successful.”

A natural ventilation system from SE Controls Africa is helping create a cooler and improved learning environment for pupils and staff at independent Heron Bridge College co-educational school in Northern Johannesburg.

New development featuring 173 residential properties with private balconies. MidiTerrace decking support system with Classic composite decking in the shade 'Slate' was used on the surface and soffits of each elevated terrace space.

The StoSilent Distance system and StoDecosit interior plaster now provide a practical and comfortable acoustic environment for the new 25-metre, 8-lane pool at the University of Portsmouth’s £57M Ravelin Sports Centre.

The Pond Hall Building at Sellafield is 36mtrs high and 192mtrs long and houses two large water ponds for the reprocessing of spent uranium rods, which is now reclad in Trisomet insulated panel system.

The Curtain is a beautiful industrial jewel located on the site of a former 1970s office block. Leading aluminium systems company Reynaers has helped to develop this complete new building into a beautiful industrial jewel.

Youth Zone in Greater London installed a DYNAMIK Komfort Plus sprung sports floor system finished in 2mm Sport PU. This solid synthetic surface finish is ideal for multi-use activity.

Refurbishments have recently taken place on the internal and external ductwork systems at the Nestlé Wisbech facilities, with White and Silver KlasseCLAD™ being favoured as the choices to provide an attractive aesthetic finish to the project. 

UltraScape’s BS 7533 compliant mortar paving system has been used to install over 10,000 square meters of paving in Newport’s major new shopping and leisure scheme, Friars Walk.

University of Wolverhampton EnTRESS report.In 2025, gas boilers will be replaced by renewable heating systems in all new-build homes. This is part of a government effort to achieve net-zero CO2 emissions by 2025.

A luxurious housing development by AJC Homes Scotland in one of the most exposed parts of the UK has used Edgemere concrete interlocking slates and a full dry fix system from Marley for their roofing.

The roof top, hotel flooring, podium and car park totalling 72,000m2 was given the ARDEX System treatment, including a heavy-duty waterproofing that could be installed fast enough to meet the strict deadlines.

Specified at the design stage Bioclad’s white antimicrobial PVC system along with BioArmis wall protection including bump rails and corner guards were installed through-out this recent healthcare scheme.