"fire security for doors windows"

Battersea Dogs & Cats Home was established in 1860 by Mary Tealby as the Temporary Home for Lost and Starving Dogs. Since it opened, the charity has cared for more than 3.1 million dogs and cats. To increase capacity at their old Windsor site BDCH are adding a new wing.The animal charity required specialist doors for a new intake building which includes 27 kennels and 4 maternity kennels.Dortek supplied hygienic hinged doors with Stainless Steel frames throughout the new building. Some doors also had automations and access control locks for ease of access and increased security. Fire doors with 30 minutes certification were also supplied for the protection of animals and staff throughout the facility.The GRP construction of Dortek doors makes them easy to clean, waterproof and extremely robust. They are ideally suited to animal care facilities requiring a low maintenance design.

Back in 2019, the William's Group opened the doors to their brand-new flagship automotive retail store based in Trafford City. The store was set to home luxury brands such as MINI, BMW, Land Rover and Jaguar all within one compound. This meant they needed an effective perimeter security system that would hold up against intruders onto the site and also added protection around the showrooms that would house these luxury cars. For the entire perimeter protection, they selected the Eclipse-60 V Mesh Profiled Fencing to deter vandals and intruders, whilst opting for the Securus-Lite SR1 358 Fencing to encompass the showrooms for that additional level of security they required. The Williams Group also chose the SlideMaster Sliding Gate as the perfect match for their ingress and egress security.

Jewers Doors have just completed the installation of sixteen sets of Phoenix Swift bi-folding doors for the newly constructed Fire and Ambulance stations at the $15.5 billion EXPO 2020 Project in Dubai. 

This imposing Victorian semi-detached villa required complete refurbishment, both inside and out. As well as brick-cleaning and repointing, stonework repair and new fascias, an important part of the project involved replacing the traditional box sash windows with modern, energy efficient, secure alternatives.

TRC were appointed by Mulalley & Co LTD to design, supply and install 205 fully glazed and factory finished traditional box sash windows for Vauxhall primary school in London.Vauxhall Primary School is one of many British schools to be financed by the government in their mission to refurbish schools across the country.The Department for Education has invested £11.3bn since 2015 to enable schools to refurbish their buildings – this includes £1.8b in 2021-22 alone.We have a huge amount of experience and expertise in restoring and breathing new life into schools, hospitals and other significant public buildings, with Vauxhall Primary School being one of six school projects that TRC has completed since the ease of 2021’s COVID restrictions.We installed 205 fully glazed and factory finished Traditional Box Sash windows into hardwood consisting of a height of 3500mm with Teleflex operated top lights.Not only do the Traditional Box Sash windows provide a timeless classic look, they also provide incredibly efficient cooling, keeping classrooms cooler and pupils more comfortable during warmer months.The windows installed had to comply with the following specification requirements:Double glazed sash windows to achieve overall Uw-value of 1.4 w/m2k;Hardwood Georgian barsPas24 Enhanced Security element for ground floor windows 

This project involved the demolition of an existing two storey extension to the original house which was built around 1840 in the Barnsbury Conservation Area in Islington in North London. The interior layout was unsuitable and the owners wanted to bring more natural light and views of the garden into the space. Clement provided the stunning EB24 steel windows and doors which provide a sharp contrast to the oak boarding and make the extension look as if it is floating, enabling excellent views across the garden and surrounding area.

Located in Surrey, this detached Victorian property needed its top floor timber windows replaced due to rotting. Maintaining the windows was proving costly for the homeowners but they needed a solution that would still look authentic next to their ground floor timber sash windows. After researching their options, the homeowners came across Roseview’s traditional timber alternative sash windows. The possibility of maintenance-free sash windows that are indistinguishable from the original box sashes, but while providing modern thermal efficiency and enhanced security, made Ultimate Rose the obvious choice. Using modern technology, Ultimate Rose is completely seamless with traditional joinery style mechanical joints and the slimmest 35mm mid rail on the market. When installed adjacent to the homeowner’s original windows it was almost impossible to see a difference. The home was finished with a single vertical astragal bar to match the home’s existing sightlines and allow for maximum natural light. Additionally, run through horns and a wood grain texture was added for a fully authentic finish. The result is truly indistinguishable, and the homeowners now have traditional and modern performing sash windows that will last for years to come. The owners are now planning to replace the timber windows on the ground floor with Ultimate Rose as well.

Accoya wood has recently been specified by Architekturo Siemonsen for windows at private residence in Hamburg, Germany. Fitted by Reinhard Adling Accoya was chosen for this project because of its stability and durability properties over other woods. Accoya wood is the perfect substrate for windows and doors as its naturally insulating and is so stable that the coatings last longer.

This Grade II listed building in Thames Ditton dates from 1792. The former manor house, priory and chapel was repurposed as a care home in 1905 by the Nuns of Compassion, yet in recent years the historic buildings have posed challenges to delivering modern standards of care. Oliver & Robb Architects have rationalised the design in a renovation project to created 78 luxury bed spaces. We were appointed to design, supply and install a total of 263 timber tilt and slide sash windows, tilt and turn windows, single doors and French doors to sympathetically upgrade the property.

In the renovation of a substantial property in London SE1, in the historic Borough of Southwark, Mumford & Wood, specialists in the design and manufacture of premium quality timber windows and doors, have supplied Conservation™ casement windows and sliding sash windows for a sensitive renovation. This mixed use building was one of the last remaining plots awaiting development by morelondon.

A £4.6 million project by Liverpool Mutual Homes (LMH) delivered family homes for affordable rent on a neglected brownfield site as part of a series of measures to maximise energy efficiency. he award winning windows deliver easy-to-maintain aesthetics, but, more importantly for this project, exceptional security and low U values.

Described by architects Proctor and Matthews as a ‘courtyard oasis for later living’, large fixed VELFAC windows combine with smaller units and doors, all with uniform sightlines to create glazed screens fronting all 38 apartments. The internal timber frame also creates a ‘domestic’ interior finish’.

The Coopers FireMaster®, closed rectangular Concertina fire curtain is a perfect solution when requiring fire compartmentation around a staircase as it offers a virtual firewall creating a lobby once the curtain has been deployed with more than 2 hours integrity. The innovative Concertina fire curtain installed at Aldgate Tower fully encapsulates the staircase from the 11th to the 12th floor in the event of a fire. The curtain is triggered by either the fire alarm system or a local heat or smoke sensor and is automatically deployed from the ceiling to the floor.

An innovative door design was required for a new manufacturing process about to be introduced in the new Nissan battery plant manufacturing facility. Project/doors:100 Bespoke Conveyor screensThe challengeNissan required a unique door for a new production facility. The doors needed to give 60-minute fire resistance and be capable of completing up to 400,000 open/close cycles a year. Further, the doors needed to meet strict air leakage criteria and be able to withstand sudden air-pressure increases. The doors also had to interface with third-party equipment such as conveyor belt controls and fire alarms. Each required an LCD display control panel that provided a quick and easy diagnosis of what each door was doing at any point in time. The solution Using an already proven design solution which Hart developed for the baggage handling system in Heathrow’s Terminal 5, Hart adapted the product to suit this new requirement. As this was not a product already on offer, invention and rigorous testing were required.The successA decade has passed since the doors were installed and commissioned. The facility continues the manufacture of the battery cells and the doors remain a critical part of the success of the plant and have proved exceptional reliability and total cost of ownership

AboutThe Dubai Metro Red Line, at 52.1 km (32.4 mi), is the world’s longest driverless single metro line. The planning of the metro was in response to a rapidly growing population and severe traffic congestion to relieve motor traffic and provide infrastructure for development.Project/doors200 Insulated Roller Shutters, both fire rated and non-fire ratedThe ChallengeThe Hart contract to manufacture over 200 industrial roller shutters to Dubai Metro, one of the most advanced urban rail systems in the world, was secured through the Al-Futtaim Group, who in turn were awarded by Chadwick Technology Group. Hart not only manufactured the doors but provided training to JT Metro JV, Dubai Metro Project.The SolutionManufacture over 200 Insulated Roller Shutters, both fire rated and non-fire rated for the Jebel Ali, Rashidiya and Al Qusais train depots. The shutters are designed to work in very sophisticated and complex systems including depot protection when driver-less trains are in operation.The SuccessThis was Harts largest export order to date and came on the back of large orders for Hart products for Heathrow’s T5 and the international railway terminal at St. Pancras. Once again Hart successfully delivered on a large scale project due to the engineering knowledge and project management experience.The ReviewYou have shown a high level of technical competence and professionalism in dealing firstly with the lengthy approval process, mainly due to the critical importance of the shutters for the automated operation of the Metro system, and secondly with the various site issues that invariably arrive on a project of this scale and fast track nature. Peter W. Mansell, Project Director, Chadwick SEC

Crystal Window and Door Systems achieves precision colour matching with Sherwin-Williams Powdura 4000Within the last 30 years, Crystal Windows & Door Systems has grown exponentially, now selling roughly 500,000 products per year. The company relies on Sherwin-Williams to help ensure quality, colour matching and quick turnaround for their customers.

Sector:     EducationArchitect:  Innes Associates Specified for: ·      Sustainable construction·      Inner timber frame ·      Durable external aluminium·      Design versatility·      Competitive pricingDesigned by architects Innes Associates, the latest addition to Cromer Road Primary School is a distinctive, L-shaped red-brick classroom building which wraps around a newly landscaped play space. VELFAC slim-framed windows and doors are a key feature of every facade, with dark grey external frames emphasising the pattern of shadows created by textured brickwork and inset window apertures. The VELFAC system has also helped architect Corrie Rounding meet challenging regulatory and sustainability targets while maximising usable space, increasing natural light and improving ventilation. ‘We pushed the contractor to specify VELFAC as we knew the composite frame was the right fit for the Cromer Road project,’ says Corrie. ‘The sustainability of the VELFAC system, and its low energy performance, met Department of Education requirements, while the robust external aluminium frame is ideal for a busy school environment. The design of the windows and doors also met our aesthetic brief, especially the inner timber frames. These are clear lacquered to emphasise the wood, provide a link with the trees surrounding the new building, and to deliver a less ‘sterile’ finish than aluminium or uPVC.’The VELFAC system could also meet key ventilation, daylighting and budget targets: ‘To manage costs, and maximise daylight in the right places, we concentrated our glazing allowance at the areas of most activity,’ explains Corrie, ‘but we also used windows to maximise the usability of the interior. For example, we used tall slim VELFAC units to illuminate the staircase but placed larger windows directly under the stairs to create an additional and useful breakout space.’The Cromer Road building is naturally ventilated, unusual for a Department for Education funded primary school project, with VELFAC units carefully configured to support an efficient flow of fresh air: ‘We wanted to make sure the building could stay comfortable without the need for mechanical cooling, even through the hottest summer,’ says Corrie. ‘This meant the placement of smaller windows on south facing facades, to manage solar gain, and the specification of multiple opening units across the building, including high level teleflex-operated lights. These are especially important in the classroom window screens where ventilation is guided by CO2 monitors.’ To ensure the security of children and staff, all windows also feature restrictors, with finger guards fitted to doors as an additional safety measure.Corrie was also pleased with the support provided by the VELFAC team, especially in the early stages: ‘VELFAC provided the estimates and performance data we needed to convince the contractor that VELFAC was the ideal solution for this project,’ she says, ‘and the school was certainly very happy with the end result’.

How to incorporate a fire or stove installation into a self-build project.By Niall Deiraniya, UK general manager, DRU FiresAlways ask for the fireplace specification at the design stage. Modern gas fires and wood stoves require careful planning in order to work as part of the general home heating system.Gas, wood or other fuels?Decide which fuel type best suits your home. Modern gas fires have realistic flame pictures and are much more energy efficient than older models.Wood stoves and fires also have greatly improved energy efficiency due to Ecodesign regulations. The only downside is that there is much more work involved with buying and storing the wood and cleaning the stove after use.Both gas and wood have room sealed options. This means that no air from inside the home is used for combustion and all waste emissions are expelled outside, resulting in clean burning and high efficiency.Finally, sustainable fuels such as Bioethanol produce a very attractive flame picture, burn cleanly with no smell or emissions and are available in a large selection of design formats. Built-in or freestandingIf you are converting a house with an existing chimney, you may wish to retain the chimney, to incorporate a more modern fire. Conventional flue gas fires are designed to fit seamlessly into standard chimneys and require minimal building work. The chimney will almost certainly need sweeping before installation and the fire may require a chimney liner for essential safety.Most wood fires are also designed for chimney installation and make full use of the air circulation properties to provide visually attractive and energy efficient fires. You can either elect for a basic ‘insert’ fire, which matches the dimensions of a Class 1 chimney or a widescreen model, which will require some structural changes.Freestanding stoves are very popular, as they offer greater flexibility of location and provide dramatic room features. They are available in gas, wood or bioethanol and generally need a flue connection to an outside wall or through the roof. No chimney optionsContemporary balanced flue gas fires are designed to be installed without a chimney, so you can incorporate them almost anywhere in a self-build project. However, they still need to be specified at the earliest possible stage. A typical installation will require the fire to be flued through an outside wall, with the flue concealed behind a false chimneybreast. Fires can be located in room-dividing walls and other architectural features so they can be seen from both sides. You can also enjoy fires in kitchens, bedrooms, loft conversions and many other places. These types of installations are made possible by extended, fan-assisted balanced flue systems. They allow for multiple fires to be placed in larger properties, with the flues hidden in crawl spaces and other discreet areas, terminating on the roof.In conclusion, the secret to having attractive and energy efficient fires and stoves in any self-build project is design, plan, cost and implement. And always consult a fully qualified Gas Safe or HETAS engineer.For further information visit www.drufire.com

Chipping Homes specialises in building high quality, architecturally sensitive homes, which made the choice of contractors critical. This was especially the case for the window contractor – with over 300 windows required, getting the right look and feel for this element of the project was essential. The windows specified for the contract were Optima from Profile 22, the UK’s leading award-winning commercial window system. The fabrication and installation contract was awarded to Profile 22 Approved Contractor Kingfisher Windows, a leading manufacturer and supplier of windows, doors and conservatories.

Coopers installed and commissioned two FireMaster® Plus fire curtains, the first to protect the property from fire and smoke migrating from the kitchen whilst the second to protect the internal balcony from smoke and fire travelling between floors. Both fire curtains provide 2 hours fire and insulation zone protection and were installed into the ceiling to remain hidden from view until deployed by a fire alarm.

A 150yr old stone built cottage had developed structural faults. The archway entrance was failing due to inadequate support causing distortion of the arch pier, the front door to jam and masonry cracking in the archway walls. HD BowTies were installed through the front elevation stonework and the first two floor joists to provide lateral restraint. HeliBars were bonded into the mortar beds to create masonry beams which assisted in distributing the loads above the arch. Crack stitching was undertaken to repair and stabilise the archway wall which was also secured to the internal cross wall with grouted CemTies.

Fleet Street in the City of London has long been known as the historic home of the British press. Number 53 is a Victorian terrace, with a striking front tiled facade. Thornsett Group, working with architects Capital Architecture, has recently converted the property into five luxury residences, plus ground floor retail space. We were appointed to design, supply and install 26 traditional box sash windows for the main elevation, with an acoustic performance of 45 dB Rw. For the rear of the property we provided 24 inward-opening timber tilt and turn windows, plus lift and slide patio doors.

Gerico France designs, manufactures and installs bulk solid storage and handling equipment. It offers bucket elevators, conveyors, pipes, silos, warehouses, milling machines, feed producing equipment, heat treatment devices, and accessories.Project/doors: 21 Speedor Storm High Speed DoorsThe challenge Gerico France delivered a turn-key flour mill project in Mombasa, Kenya for a Grain milling company at their state of the art milling plant. They required a solution to stop dust going out of the building instead of being aspirated by the installed system when emptying grain trucks into the wheat grain intake pit.The solutionHart installed three Speedor Storm doors from 4m wide x 5m high to 7m high. The Speedor Storm is the next generation of large external door which has improved wind resistance on both sides of the door and is suitable for larger openings, greater than 6m. This door does not require separate wind bars as the curtain contains wind bracing every 1m and is held securely into the guide channels with rollers at either side. The success Hart Doors sent an experienced engineer to Mombasa to supervise and assist in the installation and commissioning of the doors along with the training of staff to install future orders. 18 more Speedor Storms were ordered for a specialised dry bulk discharge and handling terminal for grain imports, located in Shimanzi, Mombasa.

Holland had to mount its largest-ever security operation when it hosted the third Nuclear Security Summit at the World Forum in The Hague in March 2014, with 13,000 police officers, 3,000 soldiers and 4,000 military police mobilized during the summit.Organisers had to guarantee the security of the world leaders from 53 countries, including event sponsor US President Barack Obama, and up to 3,000 journalists without unduly disrupting the day-to-day lives and business of local Dutch citizens.The SolutionDutch police turned to a British high-security fencing systems manufacturer with a growing international reputation as the go-to company when world leaders gather and the hosts need to guarantee their protection.Zaun installed 30km of fencing to secure the London 2012 Olympics including VIP emergency gates at the Olympic Stadium which were dubbed the Obama Gates.Last year it provided the same service for the G8 Summit in Northern Ireland and the influential meeting of global leaders and the world’s commercial, political and financial powers at the Bilderberg conference at The Grove in Watford.Zaun worked with long-term partners Hardstaff Barriers and Highway Care to design, manufacture, install and decommission the temporary high-security cordon around the summit, which included 13 gates and almost 3km of fencing, much of it designed to mitigate the attack by hostile vehicles or protesting mobs of people.Debates within the security cordon – 1.8km of SecureGuard and 1.1km of its RDS Rapid Deployable System – focused on how to lock up the world’s nuclear materials more securely so they would not be so easy for terrorists to steal: a field again where Zaun has helped in securing the nuclear industry.

Based in Lincoln this multiple dwelling new build project required sash windows to fit its architecture. The homes were built using local stone which meant standard white windows wouldn’t match its high-end appearance. The developers also needed windows that came with high performing benefits such as thermal efficiency, security, all while remaining maintenance-free. Using our in-house spray shop, Charisma Rose was specified in a solid cream option that complimented the stonework beautifully. The trickle vents were also colour matched to seamlessly blend in with the windows and keep the luxury charm of the buildings. A traditional astragal bar grid was picked to match Georgian architecture as well as run through horns and a 2/3 unequal split for the ground floor. This project ran smoothly providing more than 50 sash windows over seven dwellings. All windows were manufactured and delivered on time and snag-free, meaning there was no impact on the developers schedules.

Deptford Fire Station is a Grade II listed building in Lewisham having been originally constructed in 1903. Bolton Gate supplied the folding appliance bay doors in the 1960’s and although still functional after fifty years, they were in need of replacement due to frequent usage. Since the building is listed, every effort was required to replace the doors on a like for like basis and Bolton Gate were engaged to supply new folding shutters to the same design which were installed and handed over recently. This is the latest in a list of several fire station contracts undertaken in London.

Jewers Doors have recently completed the supply and installation of nine sets of large Osprey sliding-folding doors to secure three new Civil Defence stations in Dubai located at Nad Al Sheba, Al Mizhar and Jebel Ali.

When a new mental health unit planned to provide a safe and secure environment for their patients and staff, CLD Fencing Systems and a Littlewood Fencing were asked to design, manufacture and supply the perfect solution for this project.Hafan Y Coed (Haven of Trees) Mental Health Unit at the University Hospital Llandough opened the doors of their £ 88 million facility back in 2016 offering patients a modern, therapeutic and recovery-focused unit.Powell Dobson and Laing O’Rouke designed and constructed the detailed mental health unit, and in order to match the level of safety of the building, their hospital security fencing needed to encourage privacy and security throughout.The BriefSecurity of patients and staff was paramount when understanding the brief for the new perimeter fence line and security access control. The following requirements were set out to maintain their security needs:Create a safe and secure environment for staff and patients by implementing high security perimeter fencing.Feature anti-climb, anti-cut and anti-ligature properties for both fencing and gate solutions.Provide privacy screens for specific areas of the unit to promote recovery.Manufacture 18 gate solutions for easy access for staff through the entire site.

The Olympic Delivery Authority turned to Zaun to secure the near 20km boundary of the Olympic Park. A further 1.5km of Zaun fencing provided a ‘ring-within-a- ring’ around the Olympic Stadium. Zaun worked with Olympic Park contractor Skanska and stadium contractor BAM Nuttall to install 3.6m high fencing above ground, topped with 1.2m of electric fencing, with security properties specified by Olympic security advisers.

With stringent demands in terms of design, comfort, and functionality, the new City of Glasgow College is considered a ‘University of the Future’. GEZE UK made a key contribution to the modern look & feel of the technical college with custom door solutions, including revolving doors and swing doors.State-of-the-art door systems for the City of Glasgow CollegeThe £228 million project for a capacity of 40,000 students and 1,300 employees was completed by the Sir Robert McAlpine construction company. The entrance areas on the west and south sides were designed using GEZE door technology to reflect the structural aesthetic of the City Campus.The highly modern new building, with over 1,000 classrooms, boasts a striking design while fulfilling high requirements for functionality and safety.Manual revolving doors ensure the flow of trafficThe west and south wings impress with modern steel and glass façades with two manual revolving doors. An additional automatic swing door was installed directly beside each of the revolving doors.Manual revolving doors with TSA 325 NT door drives are the ideal solution for the building's specific requirements in terms of functionality and ease of access. The generous door leaves are easy to move, and the integrated control mechanism stops pushing behind an individual entering into the swing door. In addition, the revolving doors effectively protect the lobby from draughts, dust and noise.Automatic swing doors, designed as emergency exitsThe automatic swing doors directly besides the revolving doors were equipped with electro-mechanical GEZE Slimdrive EMD-F swing door drives to offer maximum flexibility. They can be activated with the push of a button, providing barrier-free access for persons with restricted mobility. The door drive is just 7 cm tall, and integrates discreetly into the door frame to move the door leaf precisely, reliably, and extremely quietly. In the event of a fire, the swing doors also serve as barrier-free emergency exit doors.Automatic sliding doors: effortless door comfortA single leaf automatic sliding door with GEZE Slimdrive SL NT drive guides students and visitors into the interior of the Riverside campus. The highly modern building, which was nominated for the prestigious Stirling Prize, houses student accommodation hat is home to over 3,000 ship building and marine technology students.The slim Slimdrive SL NT drives (just 7 cm tall) integrate almost invisibly into the modern, column-encased entrance area, moving door leaves of up to 125 kg quietly and effortlessly. This makes it the ideal drive solution for a public building with consistently high traffic in both directions – especially one such as Riverside that is also used as a residential building. GEZE's modern door solutions have played a key part in ensuring students can move comfortably and safely through their environment.

Profab Access Ltd, part of the Access 360 portfolio, is prioritising fire safety in buildings with the introduction of fire testing for both sides of its 4000 Series riser door range. Established in 2001, Profab Access Ltd is a leading UK manufacturer of wall and ceiling access panels and riser doors. The company employs a team of 71 and operates from a 46,000 sq. ft. manufacturing and distribution facility in Atherstone, Warwickshire. All aspects of the design and manufacturing process are carried out onsite.

One of the largest and busiest ports in Europe required a major upgrade to its perimeter security fencing. Due to an increase of migrants trying to cross the borders illegally, there was a need to improve the fencing around the port to ensure people who did not have the correct paperwork or permissions to travel across the border were kept safe and out of harm’s reach whether it’s those attempting illegal breaches into the port site or those responsible for preventing them from doing so.The fencing was designed to prevent migrants from trying to stow away on trucks; usually, this would happen as the truck slows or comes to a stop, and the migrants would run and get inside the trucks to hitch a ride across the border.A migrant camp nearby, which it is reported housed more than 10,000 people, ensured a constant threat of illegal migrants trying to cross the border. Many displaced migrants congregate here in an attempt to cross the borders by illegal and dangerous means. People smugglers were a constant problem, many promising migrants jobs and security once they had crossed the border.The SolutionZaun HiSec 358 Fencing was installed along both sides of the main road into the port, which aimed to prevent the migrants from getting onto the vehicles as they slowed or came to a halt. This anti-climb mesh fencing system features 12.7mm x 76.2mm tight mesh apertures, which prevents people from getting a foothold and scale the fencing to get over and prevents objects from being passed through the fabric. It also provides resistance to cutting by conventional hand tools and is employed extensively in higher security applications supported with detection and surveillance technologies.In addition to the anti-climb mesh, Zaun’s Flexible Security Topping (FST) was also installed to the top of the fencing to ensure that anyone who did somehow manage to scale the fencing could not get a grip over the top of the fencing. FST is designed in such as way what it moves as people try to climb it. Installed with concertina wire, this provides the port with a fence that works as a visual deterrent and a practical one.High-security temporary fencing and barrier systems, including SecureGuard, were also installed around the port, which provides high security, a movable border that can not only be easily converted into a PAS68 HVM perimeter but is also movable if the perimeter needs reducing or expanding for any reason. This movable barrier system also featuring FST and concertina wire as a topping for an additional deterrent.

Manchester Airport Group (MAG) is a leading UK airport group that owns and operates Manchester, London Stansted and East Midlands airports, together with a significant property business.In 2011 they began a project of upgrading their entire airport perimeter security fencing and gates to cope with an increase in passengers and estate traffic.The BriefSecurity was paramount when it came to the brief for a new perimeter fence line and physical access control. There are a number of features that have not been included in this case study for security reasons.The fence had to have the ability to be erected in a variety of ways, including on concrete, dug in, base plated and ground buriedSecurity Toppings were requiredStrong anti-cut wires on any meshAnti-climb properties to prevent scalingCost effective due to the size of the fence line

As the leading manufacturer of fire and smoke curtains, Coopers were appointed to develop a smoke curtain system to provide an unintrusive method capable of controlling smoke migrating from the lower floors. It was also necessary to protect the un-insulated glazing installed above the atrium’s reception area with an approved fire curtain barrier system approved to provide a one hour insulating zone. Coopers manufactured, installed and commissioned two SmokeStop smoke curtains developed to control smoke generated in the event of fire and effectively channel it away from occupants during evacuation.

Bioethanol fires require no chimney or flue, give off no harmful emissions and are 95% energy efficient. They are available in a large selection of designs for living rooms, kitchens, bedrooms, bathrooms and gardens. A good example is the home of Bury resident Anthony Norman, who chose an Italian kitchen and a British made bedroom from local dealer Icon, both featuring table-top bioethanol fires. Anthony and his family were convinced that they would make exciting additions to their new kitchen and master bedroom. Ebios bioethanol fires are made in Germany and distributed by DRU in the UK.

Specialist commercial refurbishment company Saracen Interiors delivers four floors of stunning Grade A office accommodation in the heart of Watford’s Met Quarter. Early discussion with Forza regarding project floor plans and elevations enabled the Forza team to prepare veneer layons that fully utilised the potential of the species distinctive decorative features and then create panel layout drawings in order that product delivered to site was clearly sequentially numbered for installation. Incorporated in the project joinery component package for Forza were items such as skirting and lift surrounds in addition to mirror frames and IPS panels for “Boutique” style washrooms.