"metal cladding"

It is anticipated that when completed in the next ten years or so, the regeneration of Wembley Park, in North West London, will provide up to 7000 new homes. Schöck is supplying its Isokorb structural thermal break systems across a number of different sites on this vast scheme, but one of the largest is South West Lands. This private rented sector residential-led mixed-use neighbourhood will account for around 12% of the new homes on the entire Wembley Park development, up to 900 in total.South West Lands is spread across four separate blocks, which all share a communal basement car park.The reinforced concrete frame buildings, up to 18 storeys high, are finished using traditional brickwork and standing seam metal cladding. To create valuable amenity space at higher levels, as well as offering far-reaching views across London, there are communal roof terraces and a considerable number of private balconies throughout the development.Schöck Isokorb® T type SK products were used on two of the phases at South West Lands for thermally connecting the cantilevered steel balconies to the reinforced concrete slab. The Isokorb® T type SK units were positioned accurately using re-useable balcony width steel jigs.

More than ever, there is a high demand for childcare with high expectations of good quality facilities, educational classes, new technology and a food court. Kidz#1 provides fun all year round for kids 0 to 12 years old. They re-opened its doors again on the 17th of May 2021, following the ease of lockdown in the UK. To keep high standards, Kidz 1 carried out some works and requested new fun lockers from Helmsman. We supplied Kidz 1 with a variety of bespoke metal lockers for different areas. We provided a bespoke size of 2100mm x 300 width x 450 depth flat-top metal lockers with six compartments of 24 lockers. These lockers specifically installed to spell out Kidz#1 for branding purposes and bring a fun aspect to the locker area. Chosen colours were shades of blue, pink and orange to reflect the brand identity. Another nest of three essential metal lockers manufactured and installed in a standard size of 1775mm x 300 width x 450 with two compartments. All lockers had number plates and cam locks for ease. Helmsman manufactured and supplied extra three modular lockers in 525mm x 300 width x 450 depth. These modular lockers are in white and oak-like laminate doors with hasp locks. Kidz 1 also needed to replace a bench and ordered a new ash hardwood bench seating which, is 2000mm long. Overall we supplied approximately around £5,000 worth of lockers and benching, including installation and delivery services.

Marrtree Business Park is a large warehouse estate, mostly made up of single storey industrial/warehouse units. A refurbishment of their roof was needed as part of a wider development, including full renovation of the office suite, new LED warehouse lighting and electrical installation.Systems in useForce®Starcoat® RChallengesOne significant challenge for this project was that the roof did not comply with current Part L building regulations and needed thermally upgrading as part of the building refurbishment works. There were also combustibility issues with the metal cladding to the perimeter of the flat roof area. Not only this, severe ponding water and delamination of the existing membrane meant poor drainage falls across the roof area.Access was also a challenge for this survey, with a scaffold having to be erected before the final roof condition report could be conducted, so time and turnaround was key to lessening additional costs for the building owner. Axter were able to conduct the survey and get recommendations and specifications to the main contractor and client within a 48 hour window, allowing the scaffold to remain in situ in preparation for works to commence as soon as possible.SolutionsAs the existing waterproofing was beyond repair, we recommended that it be completely stripped back to the metal substrate. In its place, the Force reinforced bitumen system was installed, which was idea due to its durability, flexibility and exceptional ageing characteristics.The system incorporated Hytherm ADH Tapered Insulation following on from a level survey to improve falls and upgrade the thermal performance of the building in line with current regulations.Axter’s Starcoat R cold liquid bitumen PU resin was employed to mitigate any potential fire risk to details, in line with the NFRC’s Safe2Torch guidance. A charcoal granule finish was added to this in order to maintain continuity of the RBM membrane aesthetic.

Metalseal 20 was specified as part of an industrial unit refurbishment project. Metalseal is the only BBA Approved metal roof coating on the market and the only one to come with a Latent Defects Insurance Guarantee. This is a single coat application, in this case, using brush and roller to avoid the risk of over-spray which can occur when using airless spray equipment.

The extraordinary, purpose built SuperLab in Oxford provides much needed lab space and fantastic facilities for the next generation of science entrepreneurs and innovators. The new state-of-the-art building is located close to the city centre and the university, which spins out around 15 science firms a year. Created and built by Oxford-based Robin Swailes Design and Development, the SuperLab offers almost 7,000 sq ft of accommodation for up to 84 staff and blends contemporary design with the latest efficiency features while meeting the needs of the modern workforce. The building is made of 95 per cent recycled aluminium and features a grey water system using collected rainwater to flush the toilets, thermal efficient panelling, air source heat pumps and solar panels to minimise its carbon footprint and keep running costs as low as possible. Metal Technology Ltd supplied a range of its high-performance glazing products for this unique development via approved fabricator Alternative Windows. Products used were: System 17 Curtain Walling, System 5-35Hi Tilt Turn Windows, System 4-35Hi Fixed Casement Windows and System 10-35 Thermally Broken Commercial Doors. Curved walls, round windows and open ceilings create a sense of space and wellbeing, topped off with advanced acoustics, quality finishing touches and a playful interior. The result is an inspiring and design-focused workplace that encourages collaboration. Outside, a roof top recreation area provides space for al fresco meetings, eating and drinking with views over Oxford’s Dreaming Spires. A fantastic project to have been involved in, which ultimately encourages young and innovative science pioneers to stay and further their career on home soil.

This metal roof in Warwick was suffering from cut-edge corrosion, delamination of the factory finish, and spot corrosion.The specification called for a full liquid roof coating in Merlin Grey, which Liquasil was able to supply for installation by Nadco Roofing Services. Liquasil's Metalseal can be made in any RAL or British Standard colour to suit the client's needs.After the corroded surfaces had been prepared back to bare metal and the substrate had been jet-washed and dried, a single coat of Metalseal was applied to the entire roof at a wet film thickness of 350 microns.Despite the steep pitch of the roof, runoff was not an issue; the product stuck to the roof and did not drip, leaving a consistent, glossy finish that left the whole roof looking like new.Metalseal can be made in more than just the standard goosewing grey - if you have an industrial roof that needs coating, Liquasil can meet your needs - no matter the colour.Give us a call on 0121 709 5352, or email us at info@liquasil.com.

The Spires Health Centre in Wednesbury, West Midlands, is using two bespoke metal column casings from the Pendock Radius range to conceal structural steelwork used to support the building’s delta shaped main entrance canopy.Manufactured by Pendock from 2mm thick aluminium, the elliptical casings measure 560mm by 380mm, to enclose the health centre’s two ‘I’ section steel canopy supports, which helps minimise the column casing footprint and reduce their overall size.They also incorporate a matt PPC finish, in RAL 7005, Mouse Grey, each metal column casing uses a two-piece stacked construction, enabling them to reach their respective heights of 6.8 metres and 5.9 metres.

Failing factory finishes and cut edge corrosion were present across the entire roof and Liquasil's Metalseal metal roof coating system was specified as the most appropriate solution. The roof was cleaned and all failing finishes and rust was removed as far as reasonably practicable. The roof was then coated. In this case, two colours were employed. Liquasil is the only company able to produce silicone coatings in any RAL colour.

The architects WilkinsonEyre were appointed to design this stunning swimming pool for the Worthing Borough Council following a RIBA competitor.Located adjacent to the existing Aquarena on the Worthing seafront, the Splashpoint Centre's design incorporates flexible space for all types of leisure activity.Main contractor Morgan Sindall looked to Kingsley Specialist Roofing for all the exterior cladding and roofing - with our versatile DuraMet hard metal system being used to clad this stunning landmark building. Challenges were met and solved with ease and the project completed to the full satisfaction of the client."We couldn't have been more pleased - all the deliveries were on time and the fasteners were great, excellent service!"Daniel Madell - Procurement Manager at Kingsley Specialist Roofing Ltd

Accoya cladding supplied by International TimberArmadilla create luxury experiential garden buildings. They currently focus on two core markets, hospitality and education, providing a self-contained environment for the users. Armadilla offer a smaller ‘Pod’ or the larger ‘Wave’ design but both options are ‘eco smart’, meeting the sustainability ethos of Armadilla.The garden buildings meet industry-leading insulation standards, have low energy air source heat pump technology and mechanical ventilation heat recovery. The smaller design, The Pod, can run off a one 13 amp electricity source.By endorsing the concept of the ‘Circular Economy’, all elements of Armadilla products can be recycled, repaired or reused. This is why Accoya is the perfect material choice for the external cladding, with a 50 year warranty. Accoya is a new introduction for Armadilla, justifying their product as world-leading for its sustainability and durability.Armadilla were awarded the 2020 Queen’s Award for Enterprise in Innovation.

Location: Westminster, LondonProject Type: Housing & Retail unitDevelopment Cost: £7mProduct: Rainscreen Panels with Relief MotifMeridian Wall CopingsVertical KwikFix CladdingKwikFix Soffit Planks to Balconies & Winter GardensFinish: IGP Dura XAL 4201 Style 26 MetallicClient: Taylor Wimpey Central LondonArchitect: Darling AssociatesMain Contractor: McAleer & Rushe LtdSub Contractor: KTD Facades Ltd

Metal column casings standing almost 6 metres high are being used at the Porsche Centre in Preston, Lancashire, to conceal interior structural steelwork and utilities within the two-storey main showroom and office area.Manufactured from 3mm thick aluminium with a grey RAL 9007 PPC finish, the twelve 375mm diameter metal column casings, from the Pendock MET-CL range, incorporate colour matched joint covers, header and skirting collars infills, to integrate with Porsche’s corporate colour scheme.

Riverside age exclusive housing in Grantham is using aluminium boxing from the Pendock Profiles range to conceal pipework installed as part of South Kesteven District Council’s programme of heating system upgrades.Originally built in 1980, Riverside provides 50 one & two bedroomed flats, and the metal boxing covers both horizontal and vertical pipe runs across the front and sides of the buildings as well as the point where they enter each flat. The Pendock metal pipe boxing is bespoke manufactured from 2mm thick aluminium and incorporates Incorporating a PPC RAL 9005 black finish.

The Newcastle Metrocentre is the largest shopping centre in the European Union containing over 330 stores occupying 194,000 m2.During 2008 and 2009 part of the centre was redeveloped. A.J Wells & Sons were asked to produce a series of vitreous enamelled cylindrical pillars. Enamel was specified due to its longevity, resistance to abrasion and hygienic properties.A.J Wells rolled and fabricated the columns to extreme levels – rarely achieved in enamel cladding. A recess within the metalwork was also added to house coloured neon lights.The result is a spectacular display of robust yet elegant pillars ranging from 2.5 to 7 metres in height and trimmed with stainless steel.KEY FEATURES: • Curved enamelled column cladding • Neon illumination • Stainless steel trimA.J WELLS SERVICES: • Enamelling • Metal fabrication

International Timber recently headed to Lincoln to supply beautiful external Accoya cladding to Starbucks for their new outdoor drive-thru.

Johnstone’s Trade were approached by the Commissioners of Irish Lights to improve the condition of the walls and the railings as the structure indicated that it had not been painted for a number of years. The products that were specified for the project included Johnstone’s Stormshield Pliolite Masonry, a solvent based paint that was applied on the exterior walls of the lighthouse to provide a smooth matt finish in Brilliant White. To complete the makeover, the metal railings of the lighthouse were painted in Johnstone’s Steel & Cladding Semi-gloss Top coat in Signal red.

April 2022 saw the official re-opening of the Royal West of England Academy, Bristol’s oldest art gallery, complete with the building’s striking new external lift shaft. Clad in a large-scale artwork designed by the acclaimed artist, sculptor, and printer maker Peter Randall-Page and produced by A.J Wells and Sons in stunning Vitreous Enamel. We surveyed, designed, manufactured and installed the beautiful vitreous enamel cladding panel system.The Royal West of England Academy (RWA) is in Clifton, Bristol, and is situated in a Grade 2 listed building, which hosts five galleries and an exceptional exhibition program focused on the best of British Art. This project is a wonderful example of how vitreous enamel, a heritage material, can bridge the historical and contemporary. Allowing modern art to fuse with and enhance historical architecture.KEY FEATURES: • Wall installation using WellsClad • Vitreous enamel claddingA.J WELLS SERVICES: • Survey • Design • Metal fabrication • Enamelling • WellsClad framing

Some recent shots of “Silk Mill”, the new purpose-built Novel Student Accommodation in Fountainbridge, Edinburgh – looking fantastic against a crisp, blue sky! Metal Technology Ltd supplied a range of high-performance architectural glazing systems through approved fabricator Avtek Ltd.The project was designed by Fletcher Joseph Associates and delivered by Watkin Jones Group. The building contains 225 rooms and includes a variety of recreational facilities to enhance student living, including a breakfast bar, gym, karaoke and gaming rooms and designated areas for dining and studying.

Established in 1984, and with several awards including The Queen’s Award for Enterprise, Technical Metals, based in Northern Ireland, offers anodising and surface preparation processes to a wide range of customers across the aerospace industry, defence, telecommunications, electronics, computer, pharmaceutical, street furniture, architectural, wind turbine and general engineering sectors.Specialised Fire and Security were awarded the contract to update Technical Metals existing fire detection system which required completely modernising. Established in 2013 by two experienced fire and security professionals with a combined 65 year’s industry experience, the company has grown to be one of the best known and respected independent specialist fire and security providers in Northern Ireland and have quickly earned a reputation for delivering tailored solutions for clients.Situated on an industrial park, Technical Metals consists of a group of buildings including offices, goods in, packaging and high-risk manufacturing environments with acid baths, heat and smoke and corrosive atmospheres. This presented a unique challenge for the team at Specialised Fire and Security, led by Tom Skates, who chose Hochiki Europe products to help keep this hazardous facility safe.Tom explains,“Originally, we were presented with a plan that included multi-sensors situated at high-level points in the adonising department block. However, during a site inspection we realised this would be an issue. Some of the light fixings were corroding due to the chemical fumes rising from adonising equipment below. We recommended that Hochiki flame detectors were fitted at a low level, pointing to the area above. This meant the area was secured without risk of deterioration”.Hochiki multi-sensors were then fitted throughout the rest of the building allowing for heat and smoke to be detected night or day. “This kind of manufacturing plant is naturally prone to dust and smoke, which can cause false alarms. A key requirement to this project was to reduce and even eliminate false alarms. Hochiki was chosen because they offer the most reliable products to help protect against false alarms. Multi-sensors are particularly good at this and allow for a flexible approach to fire detection. We have set up an ongoing maintenance programme with Technical Metals which means, should they need to change parts of the building, the Hochiki multi-sensors devices we have fitted can be easily switched to the most applicable detection method required. This is a future proofed project.”Products with integrated short-circuit isolators (SCIs) were also fitted. On a healthy addressable fire system, the voltage from the fire control panel is driven one way around the loop, both powering devices and carrying data. But if a fire loop cable is accidentally damaged by tools, equipment or chemicals for example, particularly if not mechanically protected by conduit, and the result of that damage is that the positive and negative conductors within the cable make contact with each other, that vital voltage level drops. This is a short-circuit and at this point this entire loop is instantly out of action, which of course puts the whole building and its occupants at risk.Hochiki’s SCI-enabled devices recognise this voltage drop and when they activate, they divert the loop voltage back along one of the conductors, maintaining the flow of power and data for the rest of the loop.At the same time, because it is programmed to recognise when it’s no longer receiving a return loop drive voltage, the fire control panel will automatically switch to driving voltage from both ends of the loop, using both conductors. In high-risk manufacturing environments such as Technical Metals, this innovative technology makes all the difference. “I’ve worked with Hochiki products for nearly all my career, and in fact when I moved to Specialised Fire and Security four years ago, it was a big tick for me that they were already recommending Hochiki kit to their customers. The reliability is second to none, the devices are innovative and easy to install, plus they are flexible to a range of applications”.The installation project at Technical Metals is a fantastic example of how Hochiki Europe’s range of products can be used in high-risk environments to help reduce the risk fire poses to people and assets.

Excellent contrasting setting for a local Public House and Restaurant. Carefully chosen was this Traditional Textures pre-coated Aluminium finished in Zinc Green presenting a zinc grain within the paint surface. No need to wait for any weathering as you do with any natural finish metals as we can provide the look you need from day one which sits very well within its natural surroundings.

A project to install a communal heating system at low rise flats and maisonettes at Bretton House and Sanders Way, in the London Borough of Islington, is using bespoke metal pipe boxings to conceal external pipework.The more efficient heating system was installed as part of Islington Council’s ongoing cyclical repair programme, which assesses all properties on a 7 to 10 year cycle to establish where improvements need to be planned & implemented.The Pendock casings are manufactured from 2mm thick corrosion resistant aluminium and incorporate a brown PPC finish to integrate with the brickwork and provide a consistent finish to the project. The use of aluminium not only improves weather resistance, but also adds tough protection to the external pipework.

Accoya was specified by Hofland Architectenbureau for the cladding, windows and doors for this primary school located in Barneveld, Netherlands. Supplied by Boogaerdt Hout, an Accoya distributor the 38 x 45 mm Accoya cladding was selected because of its class 1 durability, stability and sustainability properties. Windows and doors were manufactured by VIOS van den Hondel, Driebruggen and the contractor was Van Driesten Bouw.

This was a relatively small installation of under 100 sq metres of asbestos roof coating and metal gutter lining. The asbestos cement roof was first cleaned using a closed box pressure washer, with all waste water being filtered to 2 microns. The cleaned roof was coated using Liquasil's BBA Approved asbestos roof coating system, Asbestoseal. The metal gutter was cleaned and thn treated with SWT (Surface and wet tolerant) corrosion primer. Joints were treated with Non-Sag Sealer and the gutter lined with Liquasil One to provide a seamless lining.

The unique character of the atrium is highlighted by 58,000 linear metres of RIBline wall and ceiling cladding in the public areas, which Lindner IPC realised for the project. The slats in real wood veneer are particularly convincing due to their sustainable gypsum core, which makes the system fire-resistant according to EN 13501. This feature also minimises smoke development and prevents dripping, facilitating the evacuation of the building. The FGD gypsum used in the cladding is also made from waste paper and is 100% recyclable.Additionally, Lindner cooling ceilings over an area of 16,000 m ensure a consistently pleasant indoor climate in the office and rental spaces.Completed WorksPartitionsWall and ceiling panels RIBline Timber Slats Wall RIBline Timber Slats Ceiling Ceilings Heated and Chilled Post Cap Ceilings Plafotherm B 100 ® Luminaires System luminaires for metal ceilings

The landmark Health Innovation One building is an innovation hub offering co-location space for external organisations as well as being the new home for Lancaster University’s Medical School and Division of Health Research. The space is designed to encourage collaboration, where external organisations can draw upon the University’s expertise to address significant health challenges and improve health and wealth outcomes in the region and beyond.Architects John McAslan + Partners sought to realise the University’s ambition to establish itself as a major international presence in the field of Health and Medicine through the design of this new HIC. JMP’s campus masterplan will bring together businesses, the NHS, students and academics from a broad range of disciplinary backgrounds. Central to this campus is the Innovation Hub, representing phase one of the development.The scheme comprises a café, quiet reading areas, private meeting rooms, open breakout zones and a business lounge for more formal conversations. Close consultation with the University’s Faculty of Health and Medicine has resulted in a scheme that offers maximum flexibility, the promotion of interdisciplinary working and collaboration, the provision of exceptional working and learning environments, and a holistic building design that is sustainable and energy efficient, targeting an ‘Outstanding’ BREEAM standard.To achieve this performance for the £3M glazing package, fabricator Alucraft working to main contractor BAM Construct, utilised Metal Technology’s System 17 Curtain Walling in a bronze anodised finish and from our Thermal ranges, System 5-20D Doors and 5-20 windows.

The London borough of Camden’s extensive heating system renewal and refurbishment programme at the St Silas Estate is using bespoke manufactured metal pipe boxing boxing from Pendock to conceal external pipework on several high rise blocks where the community heating system is being upgraded.The metal boxing from the Pendock Profiles range is bespoke manufactured from 2mm thick aluminium to ensure it fully conceals the vertical and horizontal pipework used on the new heating system. Incorporating two PPC finishes in brown and dark yellow to integrate with the brickwork, the boxing not only conceals the pipework, but also protects it from damage.

Accoya cladding was selected by contractor Jephsons for the new KFC restaurant in Stourbridge. Along with a new Costa and McDonalds, the £5million development is the latest venture by Guernsey-based Jumbuk Ltd. After performing well with respect to stability and retained aesthetics on a KFC concept design store over the past 18 months, Accoya was chosen for the project. Finished in a Sansin coating this Accoya cladding also offers a stunning aesthetic appearance. For this project Accoya was distributed by James Latham and installed by Protec Roofing.

Meridian Integrated Systems Ltd. Approached NBB Outdoors on behalf of their estimated client L’Oreal Professional Products, to create a bespoke outdoor Multipurpose Storage Shelter, for their location in Bury.The principal project objectives were as follows:Enhanced Storage Solution: Meridian Integrated Systems were tasked with sourcing a secure yet functional storage solution for the Professional Product distribution arm of L’Oréal’s UK operations, based in Bury. The solution necessitated a roof and lockable gates and had to be tailored to fit within a specified area.Integration: The solution was required to fulfil the dual objectives of being functional and offering plenty of space. While also ensuring security to prevent unauthorised utilisation of the amenities by other businesses.Limitations and Restrictions: Given the retail nature of the business, it was essential that the chosen partner adhere to the predetermined installation timelines and operate within designated working hours. This adherence must ensure minimal disruption to the ongoing operations of the business.To meet L’Oréal’s exacting standards and requirements NBB Outdoors designed and implemented a unique Multipurpose Storage Shelter offering a range of tailored features:Custom Design: After a thorough site survey, a tailored multipurpose storage shelter measuring L5170mm x W1970mm x H2300mm was determined as the ideal solution for L’Oréal’s needs. The proposed dimensions not only met the required size criteria but also seamlessly integrated into the allocated space.Material and Construction: NBB Outdoors recommended and installed a Galvanised corrugated metal cladding roof and sides to the bespoke storage shelter, whilst proposing and implementing a brown 100% recycled plastic cladding to the gates. The choice of materials ensuring the storage solution will stand the test of time, with little to no maintenance.Security and Protection: Ensuring the multipurpose storage shelter remained secure was of the utmost importance therefore the shelter was finished with Fire Brigade (FB Key) locks.With careful attention to detail and strategic material planning, NBB Outdoors not only fulfilled but surpassed the customer’s expectations. Delivering a neat and contemporary industrial solution to the customer’s requirements.

Project Name: AMRC - Advanced Manufacturing Research Centre North WestLocation: Samlesbury, LancashireMain Contractor: Cartwright PickardCompletion Date: 2021Total Cost: £11mServices Provided: RIBA stages 1-6, Architectural DesignAwards Received:Finalist in BCO Northern AwardsBest Commercial Development in the North West at RICS AwardShortlisted for Project of the Year at Construction News AwardsLancashire Project of the Year at North West Construction AwardsSystem Supplied: Bespoke Fabrications, LandMark I, SnapLok Capping, Soffits, Window LinersFusion Facades, along with AMS Cladding Limited and the supply chain, provided a high-quality facade for the University of Sheffield's Advanced Manufacturing Research Centre North West (AMRC) project. Despite the challenges posed by the global pandemic, Fusion Facades was able to adapt and deliver exceptional service.The AMRC is located at the entrance to the Samlesbury Aerospace Enterprise Zone and features a modern workspace with a flexible high-tech workshop. To blend the 48,000 sqft building into the rural surroundings, lightweight bronze metal cladding was used over a landscaped bund.As a flagship research centre for advanced manufacturing, the AMRC had to meet the highest environmental standards. The office and seminar rooms feature horizontal glazing slots with projecting cappings and perimeter framing for passive solar shading. Reflective solid panels are used within the curtain walls to reduce solar gain while retaining the articulated openings that distinguish the office and seminar rooms from a nearby main road.A neutral colour was chosen to catch the warm tones of the morning and evening light while subtly defining the different internal uses. To break down the mass, junctions between the sheets are articulated with bronze fins denoting where the structural grid occurs internally.Overall, the AMRC project has received numerous accolades and is a testament to the outstanding work done by Fusion Facades and their partners in delivering a high-quality, environmentally sustainable research facility.

Accoya was chosen for this external application as it met all of the stability and durability requirements for the projects cladding. Accoya was also selected because it is ideal for coating. The colour was achieved using two coatings; Woca external tinted Primer and Woca external oil Anthracite. The cladding was achieved by using three different cover-width boards (119 mm cover, 69 mm cover and 49mm cover) which were all 19 mm thick, these were then attached using a secret fix application with stainless steel screws.

The new Muscat International Airport is designed to transform the airport experience not only in the Middle East but on the global stage. A smooth and pleasant customer journey is at the core of the design. Since its conception in 2011, SAS has been heavily involved in realising the aims for each area of the building. SAS has supplied more than 200,000m² of column casing, acoustic wall panelling, staircase cladding and bespoke metal ceilings to the project. Each product has been carefully designed to provide essential acoustic absorption for visitors as well as service integration and accessibility for staff.

Extensive upgrades to the distributed heating system at two low-rise housing blocks by Camden London Borough Council, have chosen Pendock bespoke metal pipe boxing to conceal and protect exterior pipework.The 3 storey Ludham block and 6 storey Waxham building provide more than 200 dwellings, which are occupied by both tenants and leaseholders. Following the installation of the heating system pipework to the exterior of the buildings, the Pendock aluminium and PPC coated boxing was installed to provide a uniform and more aesthetic finish to the project while also providing weather protection.

Metal Technology products have been used to give a stunning facelift to an office building on London’s Edgeware Road. The refurbishment design by Architects AWW (Atkins Walters Webster) specified a high performance façade system engineered to reduce air leakage and exceed current insulation values. Commenting on the scheme, project architect Mark Alker Stone said: “AWW is refurbishing this prominent building to provide a contemporary building as a new landmark within Colindale that benefits the local area in terms of its architectural quality, energy performance and contribution to Edgware Road.”

Accoya was selected as the ideal material to clad this Burleigh Brewery project in Australia. Burleigh Brewing began on 1 July 2006 and immediately set about pioneering the craft beer movement on the Gold Coast. Distributed by Britton Timbers, Accoya was chosen because the project called for a low maintenance, sustainable external cladding with a high-end appearance. Accoya was also ideal due to its natural blonde aesthetic, which was carefully selected to ensure the Brewery logo was as prominent and distinctive as possible. Roughly 4 m3 of Accoya was used with an Integrain coating.

The ChallengeStoke Football Club (FC) launched a project of investment and modernisation to achieve first-class facilities at its Clayton Wood training ground and reach the coveted Category One status in the Premier League-driven Elite Player Performance Plan.The site, which is the main training ground for the first team squad, will include modern and technologically advanced facilities on a par with other Premier League clubs and top-flight European teams, which will aid Stoke FC in attracting new talent to the club.The SolutionThe 1,800-square metre site incorporates a full-sized indoor pitch, so players can train throughout the year, regardless of weather conditions. It also offers nine spacious changing rooms, office accommodation, a medical centre, gymnasium, hydrotherapy suite, dining area and press room.The addition of classrooms to the building means the site can now become home to the Club’s football academy where future footballing talent is trained.Forterra supplied their Dark Multi Smooth Butterley Bricks for the development of the club’s training building.Manufactured in the UK at Forterra’s Wilnecote brickworks, this 150-year-old brand provided a perfect, smooth finish and clean lines to complement the building’s glass panels and metallic cladding.The BenefitsStoke FC’s investment and regeneration of its facilities has earned it two construction awards: The Local Area Building Council (LABC) Business Excellence Awards for 2014 for the West Midlands, Staffordshire and Shropshire.

This is a metal roof coating & liquid gutter lining project carried out at Oxford Brookes University. The roof was power washed and the gutters cleaned before application. The gutters were treated with Liquasil's rust primer to prevent further rusting, before the seamless, silicone Gutterseal system was applied. The roof was coated with a single coat of Metalseal 20 in Goosewing Grey.