"leadwork contractors"

Owner: Aberdeen Asset Management Principal Contractor: Cemplas Waterproofing & Concrete Repairs Ltd Main Products Used: EMSEAL SJS systemCemplas has recently completed repair works at the Elmsleigh Shopping Centre in Staines, which included the replacement of deteriorated and failing mechanical movement joints in the service decks. The Centre’s retail units are supplied via ramps to these service decks, which carry the delivery traffic above the stores, plus the decks are also used for car parking, meaning that in addition to being fully exposed to weathering, they are subject to almost continuous dynamic loading from traffic up to and including heavy articulated HGV’s. Unfortunately, despite past attempts at repair and resealing, there had continued to be water ingress through these joints, both into the structure and into the retail units that are directly below, resulting in disruption, damage and cost for everyone involved. The innovative Emseal SJS system that includes integral cover plates, but with no mechanical fixings required, was selected by the Project Engineers as being ideal to accommodate the necessary movement, seal the joints and withstand the traffic loadings. Additionally, as access was only required from the top deck to install the Emseal SJS System, Cemplas was able to carry out the works quickly and keep disruption to an absolute minimum.

Addagrip are used to seeing their surfacing systems being used for projects all over the country but it is great to see an installation being undertaken in our own town.As part of the Uckfield town centre improvements project, Addagrip approved contractor Street Tree Care Ltd was appointed to install a number of trees and SuDS compliant Resin Bound tree pit surfacing in the newly widened pavements in Uckfield High Street.Field Maple trees were selected for their compact habit, tolerance of pollution and vibrant autumn colour. Once planted, a stainless steel tray was suspended above the tree root ball and filled with a decorative resin bound porous tree pit surfacing system.The Addastone TP tree pit system consists of a 10mm aggregate bound in a PU resin which provides a hard wearing, low maintenance finish that is porous enough to let the water reach young tree roots but robust enough for the urban environment. A drainage pipe and grill was seated in the Resin Bound surfacing to assist with additional watering that will be carried out from April to September over the next few years.A 10mm Trent aggregate was selected for maximum porosity to help alleviate surface water flooding and to provide a decorative finish to complement the new York Stone pavements.

DECORATIVE RESIN BOUND PAVING DESIGN FOR LUXURY APARTMENTS IN KENTAddagrip approved contractor Total Protection GB Ltd was appointed by the Kingston Landscape Group to carry out an intricate circular surfacing design for the courtyard of an £11 million residential development in Sevenoaks, Kent.Tubs Hill House, a Prime Place development of a former office block into luxury apartments, required a high quality, decorative surfacing feature for the split level courtyard gardens, built above an existing concrete slab car park. The circular design required two contrasting colours of BBA approved Addaset Resin Bound porous surfacing created with the help of a formable edge for both the courtyard and podium area.SURFACING REQUIREMENTThe surface needed to be decorative and hard wearing to offer a durable high quality finish for the luxury apartment development. BBA approved resin bound porous surfacing was selected. A total of area of 111m2 of Addaset was installed using 3mm Lucerne Silver and 3mm Dorset Gold blends to provide a low maintenance pedestrian surface with good slip resistance for this eye catching organic design. The aluminium flexible edging strips were used to create the circular design and form a solid divide between the two resin bound colours used for this pattern.

RESIN BOUND SWIMMING POOL SURROUND FOR DAVID LLOYD GYM IN ACTONAddagrip approved contractor Total Protection (GB) Ltd has installed 294m2 of Addabound Resin Bound surfacing around the swimming pool at the David Lloyd Gym in East Acton, London.SURFACING REQUIREMENTThe client was looking for a decorative Resin Bound paving for the outdoor swimming pool at the gym which has just undergone a £9m refurbishment to provide an indoor and outdoor pool, modern spa and racquet courts. The requirement was for a low maintenance system that would be smooth and comfortable underfoot, providing a decorative aggregate finish that could be powerwashed as part of the cleaning regime of the pool area.Interserve Construction appointed Total Protection (GB) Ltd to prepare the surface and install 294m2 of BBA approved Addabound Resin Bound surfacing in a recycled marble Dune blend.The challenge was the preparation required to the existing surfaces surrounding and adjacent to the outdoor pool to ensure a suitable substrate for the Resin Bound system. Undulations and differing depths were regulated with compatible screed material and an aluminium edge detail was installed to provide an edge for the 12mm depth of Addabound.The new surface was installed in a single application in May 2018 to prevent any day joints and ensure the smooth, seamless finish was achieved in time for the grand opening.

Terrabase Rustic was selected for a ‘no-dig’ project creating new pathways across existing grassed, macadam and gravel areas in a popular park in Putney, London.Addagrip approved contractor True Grip Ltd was approached by the local authority to provide a quote and proposal to upgrade the existing pathways and create new paths to the Leader’s Gardens, a small public park lying alongside Putney Embankment, opened in 1903.SURFACING REQUIREMENTOne of the issues to be resolved was that the tree roots could not be disturbed so a ‘no-dig’ system had to be applied around the trees and rooted areas. For these ‘no-dig’ areas True Grip specified Addagrip’s innovative Terrabase Rustic system to be laid directly onto the existing grass and directly over the rooted areas, creating a new pathway. This meant that the trees and tree roots were not disturbed and due to the porosity of the Terrabase Rustic system, precipitation would not be reduced, irrigating the existing surface without changing the trees’ climate or environment.Over 250m2 of Terrabase Rustic Oak 6 -10mm aggregate blend was selected to provide attractive, hard wearing, natural aggregate pathways that are low maintenance, seamless and in keeping with the park setting. The porosity of the Terrabase Rustic system allows essential drainage to reach the tree roots and provide all year round access for pedestrians and wheelchair users.

Resin bound Addabound porous surfacing for sports complex swimming pool surround.Addagrip approved contractor Total Protection (GB) Ltd has installed 294m2 of Addabound Resin Bound surfacing around the swimming pool at the David Lloyd Gym in East Acton, London.The client was looking for a decorative Resin Bound paving for the outdoor swimming pool at the gym which has just undergone a £9m refurbishment to provide an indoor and outdoor pool, modern spa and racquet courts. The requirement was for a low maintenance system that would be smooth and comfortable underfoot, providing a decorative aggregate finish that could be power washed as part of the cleaning regime of the pool area.Interserve Construction appointed Total Protection (GB) Ltd to prepare the surface and install 294m2 of BBA approved Addabound Resin Bound surfacing in a recycled marble Dune blend.The challenge was the preparation required to the existing surfaces surrounding and adjacent to the outdoor pool to ensure a suitable substrate for the Resin Bound system. Undulations and differing depths were regulated with compatible screed material and an aluminium edge detail was installed to provide an edge for the 12mm depth of Addabound.The new surface was installed in a single application in May 2018 to prevent any day joints and ensure the smooth, seamless finish was achieved in time for the grand opening.

Welcome to 120 Moorgate, a grade A office in the City of London. 3,000m2 of AGC ipasol Neutral 70/37 solar control double-glazing units and matching spandrel glazing was chosen for the facade of this extensive refurbishment project completed in 2020.In order to meet the demands of today's contemporary workspaces, a new facade was needed in order to improve the energy and acoustic comfort for occupants. With seven floors of full-height glazing, the ipasol Neutral 70/37 double glazing specification allows for the highest level of daylight and connection with the outside environment whilst protecting against overheating thanks to its solar gain reduction properties (g-value of 0.37). The fastest growing use of energy in buildings is for cooling, so harnessing existing technologies such as solar control glass can contribute to a sustainable building strategy.A low U-value of 1.0W/m².K was also a given, in view of the facade's thermal insulation requirements. Laminated glass was also incorporated in the specification of the double-glazing units as an acoustic enhancement to help protect against nuisance noise and also as a safety measure since the full-height glazing is accessible from interior spaces.Design work by Darling Associates and installation undertaken by specialist facade contractor Anglian Architectural.120 Moorgate is rated BREEAM Very Good.

Specialist refurbishment and planned works contractor AYM Contracting approached EnviroBuild to supply adjustable decking joist supports for a commercial project near Liverpool Street in the heart of London.The 40 m² rooftop office terrace needed a low-maintenance, durable substructure to safely support Hyperion composite deck boards, so it was decided that MESA Support pedestals would be the best product to achieve this.The SolutionWorking with award-winning international construction services company ISG, EnviroBuild fulfilled the order for over 100 MESA support decking feet. The adjustable joist supports were installed under treated timber joists to ensure a long-lasting base and robust foundation.The easy to install pedestals, made with 100% recycled plastic, also come with a 10-year commercial warranty so the client can rest assured that the decking area will be enjoyed for many years to come.The finished result is a wonderful open-plan roof terrace where employees can relax and appreciate the incredible views across central London.Customer FeedbackThe client was pleased with the excellent service and fast delivery which allowed them to install the decking quickly and efficiently.Project DetailsSize: 40 m²Product: Mesa Support Adjustable pedestals Location: Shoreditch, London

An entrance that needed reviving and improved functionGeorge Eliot Hospital is based in Nuneaton, Warwickshire. It provides a full range of emergency and elective medical services to the local area, including maternity services.Project Year: 2022Product: UniturnProject Background: We were contacted directly from the hospital’s Estates Department to review an existing traditional sliding door entrance, with a view to proposing a solution to upgrade to a high capacity revolving door. An important need was to improve the temperature in the reception area, enabling climate control.The existing entrance lobby was too narrow to accommodate both the revolving door and necessary adjacent pass doors to meet Equal Access requirements and so we had to come up with a different solution.Solution: To overcome the narrow lobby entrance we proposed to locate the revolving door in front of the existing lobby’s footprint, which in turn required the building’s foundation slab to be extended under the revolving door location.This solution required detailed technical and design input from FES to the client’s nominated building contractor and design team to ensure that the build was both structurally sound, aesthetically pleasing and met the relevant building regulations.The Uniturn has improved accessibility in and out of the hospital and has provided energy savings and temperature control, resulting in a successful project.

Architectural glazing systems by Kawneer, including aluminium heritage-style GT70S windows appropriate for the conservation area, have helped to transform the façade of an old radio and television factory into the new four-storey London Screen Academy building at Highbury Grove in Islington, north London.Kawneer’s GT70S slimline renovation open-in windows were the “focal new element” of the renovation of the façade of the four-storey building at Highbury Grove in Islington, north London, where Kawneer’s AA®100 zone-drained curtain walling and series AA®190 TB entrance doors also feature.The GT70S windows with narrow sightlines were installed over 12 weeks by a team of eight from specialist sub-contractor and Kawneer dealer JPJ Installations throughout the 8,050m2 building, with the AA®100 curtain walling, which also has narrow 50mm sightlines, used on the rear elevation and the series AA®190 TB severe-duty welded doors used on the main entrance.This cutting-edge new free school by the Department for Education provides world-class film industry focused vocational training, including behind-the-camera roles, costume design, production management, distribution and marketing, alongside a broader curriculum, for 17 to 19-year-olds.

Ilona Rose House with its unusual rose-coloured 3D printed façade is a new-build, mixed-use project spread over 13 floors, including a 4 storey, basement with a quarter natural light. It has transformed the former site of the famous Foyles bookshop on Charing Cross Road, boasting outstanding new shops and restaurants, along with new pedestrian walkways, public realm and roof terraces.The unique building has been designed by MATT Architecture for main contractors Sir Robert McAlpine and offers 150,000 sq ft of office space, 20,000 sq ft of retail fronting on Charing Cross Road and a brand-new public courtyard with 15,000 sq ft of restaurant and bar space.The upper floors comprising of offices exploit the stepped massing of the building to create over 12,000 sq ft of planted external terraces for the benefit of the occupiers and to enhance the environment.The south-west facing terraces, nicknamed ‘the hanging gardens of Soho’ will provide external amenity space for every single level of office. It is here that Radmat’s waterproofing and insulation products were chosen for their tried and trusted properties. PermaQuik Hot Melt Bitumen Waterproofing System was used on 95% of the roof areas, multiple roof terraces, Greek Street Tunnel and James’ Courtyard.

A £40 million investment, 13 roof areas, eight different roof levels, and a steady stream of visiting students to keep happy throughout – the University of Reading (UoR) Library’s complete refurbishment was a large and challenging project spanning three years.Originally opened in 1964 and later extended in 1985, the library’s internal and external revamp was designed to increase space, improve facilities for individual study, provide better access and security across the building, and improve energy efficiency.In addition to a new-build Café extension, a new entrance canopy, a new ground-to-roof level lift and stair core extension – each featuring a new flat roof area – there were also 10 existing flat roof areas refurbished, coupled with the replacement of windows and re-cladding of the building’s exterior.Following a competitive tender based on an outline specification, Owlsworth Roofing, Sika Sarnafil single ply flat roofing specialists, impressed with the level of detail included in their quote and were awarded the contract by main contractor ISG.Roofing:Sika® Sarnafil G410-12 ELF.Sika® Sarnafi G410-12 EL.Sarnavap®-5000E SA.Sarnavap® HD SA.Primer 600.Sikatherm® PIR Insulation and Sarnacol®-2162.

A selection of our high-performance aluminium fenestration solutions has been used for this new café and drive-thru at a popular shopping destination in Wales.The new Starbucks at Parc Pemberton Retail Park has been designed by G1 Architects and built by Trojan Construction, with the aluminium fenestration package skilfully delivered by specialist contractor Sherwood Aluminium Systems.The project features both our cost-effective SCW aluminium curtain walling and our robust SFG shop front glazing system, which are both ideally suited for use in the retail sector as they combine slim sightlines with a robust and durable construction. Our curtain wall system has been used to create a bright and airy interior in the café, and the SFG system has been integrated with our SD aluminium doors to provide safe access at the entrance and exit. Our SD aluminium commercial doors have also been used on the drive-thru building, with the powder-coated aluminium frames perfectly complementing the use of timber cladding and grey façade design.The new Starbucks outlet has benefited from both Trojan Construction and Sherwood Aluminium Systems’ extensive experience undertaking similar schemes for the retailer across the UK, with Sherwood Aluminium Systems named as a preferred supplier for Starbucks.

Technowood facade and ceiling systems, pergolas and many other products are used in Istanbul Airport spaces. These have different function such as entrance gates, check-in areas, passport control points and restaurants.Technowood real timber veneered product were used in this high-energy environment was due to the Euroclass A2 fire rating, adaptability in design and performance as real timber all without the short comings of solid timber.Lightweight, fascinating shapes and hidden fixing systems all add to make these products the most innovative and GOTO products used for all scale projects for both interior and exterior projects.“Why use solid timber when you can use a little 2% if you use Technowood products”If you can draw it, send it to us and use the skills of our in-house Architects to offer advice, realisation of all fixing considerations to be presented with the full scale of problem solving and a simple solution of installation for your contractors.I could write thousands of words, hyperbole and details of what for how and why but in this instance, I’ll leave you be with the photos that speak sufficiently for themselves…Credits and Further informationArchitect: Grimshaw in partnership with Nordic Office of ArchitectureLocation: Istanbul Airport Interiors Materials: Technowood louvres, panels and claddingCompletion: 2013

The roofs of The Dungannon & South Tyrone Borough Council offices had fallen into a poor condition and a large amount of standing water was threatening to leak into the offices below. With the office roof areas in such a poor state, the council turned to Polyroof to refurbish nearly 1,000 square metres of roof, split into 13 areas, before they fell into a further state of disrepair. DTL Construction, a local Polyroof Approved Contractor, were tasked with installing the Protec System, removing the issue of standing water and giving the roof a long service life, whilst giving the council peace of mind that leaks would not pose an issue in future.The standing water was cleared before the existing roof materials were stripped back in order to install the new system. This allowed a new warm-roof system to be installed, along with new cut-to-falls insulation. Polyroof’s Protec Cut-to-Falls insulation is an innovative two-layer system which doesn’t only improve thermal performance, it also directs standing water away from the roof.Following this, the BBA-approved Protec system was used to seamlessly waterproof the entirety of the office roofs. The system, once inspected by Polyropof’s Technical Services team, was issued with a 20-year guarantee, so the client could now have reassurance their roof would last for decades to come.

Berry Systems supplied and installed Internal and external vehicle safety barriers at new Aggreko, Dumbarton plant to protect; doorways, walkways, columns, site and equipment.Aggreko PLC, the world leader in the field of power and temperature control rental, has become the first company in the UK to have Berry Systems’ new Stopbollards installed at its new 170,000 sq ft Dumbarton facility.The many, internal and external vehicle doorways at the brand new Dumbarton site were identified very quickly as needing special protection. Glasgow architects Bradford Robertson considered a number of options before concluding with main contractors, Morgan Sindall, that our SlowStop bollards would prove a cost effective solution. During a collision, the kinetic energy of the impact is progressively absorbed as the post tilts, compressing an elastomeric sleeve within the base. The post is able to tilt from its vertical position to an angle of 20 before it locks within the base. After the impact the post will return back to its vertical position, ready to perform once again. A total of 104 SlowStop bollards were installed at Dumbarton, along with a variety of other products from our range.https://berrysystems.co.uk/wp-content/uploads/2024/03/Berry-Case-Study-Aggreko-Dumbarton.pdf

This case study focuses on a prestigious project in Fowey, developed and constructed by Bailey Partnership and Brady Construction Services. In these luxury hotel apartments a raised acoustic flooring system, known as SubFloor, was successfully implemented. The project highlights the simplicity, speed of assembly, and flexibility of SubFloor, providing architects and contractors in the construction industry with a practical and efficient solution. Additionally, SubFloor's user-friendly features, such as easy height adjustments, garnered praise from the carpenters, enabling them to work more comfortably and efficiently. By offering a seamless and rapid installation process, superior acoustic performance, and convenient adjustability, the SubFloor system surpassed expectations and contributed to the project's overall success.Products:Wooden Joist 45 x 45 mmSubFloor Screw 300 mmScrew Foot Acoustic Constructions:Joist separation c/c 400 mmBuilding height: 73 – 323 Data:System weight: 3.43 kg/m²Acoustic damping: Up to 28 dB [rating according to ISO 717-2]Point Load 50 x 50 mm (c/c 400 mm):13.96 kN/m² - Next to screw over joist[According to SS-EN 1195:1998] Materials:Pine T0-C24Fibre-reinforced VitamidePolyamide + Rubber Damping Element

Weston Homes have developed 182 luxury apartments across four blocks, overlooking the River Lea navigation canal. Situated on a former industrial estate, the apartments are designed with functionality, style and comfort in mind. The beautifully landscaped grounds include gardens, a central courtyard, a wildflower meadow and river walkways. The development also includes underground parking and balcony space for residents to enjoy the river views. The impressive curved roof was installed across three buildings. This included vertical installation of a Kalzip standing seam secret fix system.SFS supplied fixings to the project, including stainless steel self-drilling SX fasteners with an irius® (L12) head. The irius® head is an ideal solution for when aesthetics are paramount, like on a luxury project such as this. A low profile head form, the irius® has been designed specifically for applications where the fastener has to fulfill all its normal structural requirements whilst, at the same time, blend in unobtrusively with the roof or cladding. It can be powder-coated for colour matching purposes and the innovative underhead drive system enables ease of installation, whilst also offering a high level of tamper-resistance.This project was nationally recognized, with the contractor winning the 'Roof Sheeting' category in the NFRC UK Roofing Awards 2016.

Conserving a Grade I listed building with renovating plaster.Halifax’s Grade I listed Piece Hall is a true monument to the town’s industrial heritage. As part of Calderdale Council’s ambitious plans to conserve the building and transform it into a cultural and commercial hub for Halifax, a series of delicate remedial works were outlined to future-proof the structure’s original features and ensure it would be able to live up to the rigours of 21st century life. Under the schedule of works, Tarmac’s Limelite renovating plaster was chosen to provide a durable solution which was both sympathetic to the age of the building, yet robust enough to provide long-lasting results.The ChallengeFirst constructed in 1779, the Grade I listed Piece Hall takes its name from its original use as a cloth hall, where local weavers were allowed to sell their ‘pieces’ at the height of the industrial revolution. As an iconic reminder of Halifax’s prominence in the Georgian wool trade, the site is understandably a treasured landmark for local people.The aim of the Piece Hall transformation project was to conserve the historic fabric of the building and create an outstanding heritage destination fit for the 21st century. This would see the property, which consists of 315 rooms centred around a 66,000 sqft piazza, return to its previous grandeur and be reinvented as a new cultural and commercial centre for the town.The Piece Hall transformation project was delivered by Calderdale Council and made possible by funding from the Council, a generous £7 million grant from the Heritage Lottery Fund – thanks to National Lottery players – and kind support from both the Garfield Weston Foundation and the Wolfson Foundation. The Piece Hall is now operated by an independent body, the newly formed charity The Piece Hall Trust.It was vital that a specialist heritage renovating plaster was specified, to ensure that any remedial work undertaken would be in keeping with the property’s original features and sympathetic to the materials used during the building’s original construction in 1779.The plastering contractors chosen to undertake the work, Manchester Screeding Contractors (MSC), were challenged with plastering the inside of the iconic arches which surround The Piece Hall’s piazza, as well as re-plastering walls within a number of rooms on the ground floor. Given the need to use a specialist heritage plaster, MSC turned to Tarmac’s Limelite team for help.For the interior work, damaged and ageing plaster had to be removed, revealing solid stone walls which needed to be plastered in keeping with the heritage of the building. Time and weather had also eroded the exterior arches, and an appropriate solution needed to be found.Installation time was also a challenge on the project as the construction phase was nearing hand-over to The Piece Hall Trust, with the building due to be reopened to the public in August 2017.The SolutionTo satisfy the specification, MSC first chose to use Tarmac’s Limelite Easy Bond as a primer, given its ability to effectively control suction and salts, as well as improve the level of adhesion when working with difficult substrates. Following this, two coats of Limelite Renovating Plaster were applied as a backing plaster to the surfaces to remove undulation.Tom Emery, Specifications Co-ordinator at Tarmac’s Limelite division, comments: “A traditional lime plaster could take months to dry out whereas renovating plaster only takes 24 hours to dry per coat. This was essential in helping the team to cope with the tight timescales of the project.“Moisture, damp and mould growth were also found in the building. Renovating plaster is ideal in scenarios like this, as the level of breathability it offers will allow moisture to easily pass through it. It is this breathability that will significantly reduce the likelihood of damp occurring.Tom continues, “The renovating plaster was followed with a final coat of Limelite’s High Impact Finishing Plaster. The High Impact Finishing plaster is extremely durable, which is ideal given the municipal use of the building. What’s more, it’s great for use in heavily trafficked areas as it provides a shell to the backing plaster.”In total, seven tonnes of product were supplied to the project in the two-month timeframe, with MSC working through the weekends to get the job done.Karl Hodgkiss, Managing Director of Manchester Screeding Contractors, commented: “Internal and external plastering as well as restoration plastering are key specialist areas for our business, and this was a significant project for us that we were excited to be a part of. I had used Limelite’s renovating plaster before in smaller quantities and knew it would provide a breathable covering for the original stonework.”

Marlborough Manor is one of Carrickfergus’ newest and most sought-after developments, with façades reflecting a traditional, Georgian-style design created by premium AG facing bricks whose hand-crafted aesthetics appeal to architects, house builders and professional designers alike. The ChallengeBuilt by HJ O’Boyle contractors in November 2015, the 16 homes making up the £2.5m Marlborough Manor development mark the first residential development by Rosemount Homes Ltd, an offshoot of Lagan Construction Group, with whom AG has enjoyed business relations for nearly 20 years.Befitting the aesthetic tone of the Georgian-style homes the development called for facing bricks with the hand-crafted appearance sometimes only associated with clay bricks.Key to the development was also attractive and comfortable outdoor living spaces. The SolutionThe Heritage range, with its rumbled edges and traditional, rustic finish was chosen by the contracting team – and they haven’t looked back since.The beautiful Heritage facing brick – in Fergustie Mixture – was matched with AG’s Rectangular paving in Creagh Peat Brindle colour which affords a smooth finish with clean lines and richness of colour plus great skid and slip performance. And, of course, it’s also renowned for its durability and minimal maintenance requirements. Architect Alan Bennett has been completely won over by AG’s high quality facing brick – “The Heritage Fergustie brick is a great product and one I hope to use in the future.”

The International Convention Centre (ICC) Wales is an extraordinary venue designed for world class conventions, events and meetings.The result of a joint venture between the Welsh Government and the Celtic Manor Resort, renowned construction company, John Sisk & Son, was the main contractor on this 3500m2 project which also included a permeable and sustainable urban drainage systems (SuDS).AG’s premium granite block paving TerraPave® was the obvious paving choice for the convention centre as it offers a beautiful finish to complement a contemporary design. Additionally, it is a cost-effective, practical alternative to traditional stone paving. TerraKerb® also played its part in this high-profile hard landscaping project, adding a premium appearance to the ICC surrounding. With its widely recognised durability and weather resistance, it is now well established as a market-leading option.Tim Cave, Regional Sales Manager at AG, said:“A key challenge faced by AG was to create a high-quality permeable paving system for a large roof deck, capable of withstanding continuous heavy traffic. Our Xflo® Plaza was the perfect choice. AG’s Plaza block paviour is made using the most modern manufacturing techniques, ensuring it will stand the test of time and retain its high-quality aesthetics, whilst effectively managing the movement of water through the SuDS system. This is a pioneering but proven way of mimicking the natural movement of storm water and replacing conventional storm water drainage systems.”

Stowford Mill, built in 1787, is one of Devon’s oldest historic industrial sites to still be expanding.Because of its iconic features and characteristic atmosphere, Stowford Mill has long been established as one of the trendiest places to work, eat and shop, bringing commerce and prosperity to the surrounding area, and forcing the town to expand to make room for tourists who just never wanted to leave.Part of this expansion will eventually include Burrington Estates’ eight-acre vibrant community of contemporary new homes. This new development, for which the main contractor is URBN, is due for completion in 2023.Started in March 2018, the existing homes already include Alumasc Rainwater Infinity Steel gutters and downpipes, specified to provide eco-friendly, discreet and resilient water management that will last. Crucially, this system was favoured to the use of plastic systems, to meet the demand for a readily available product that was both environmentally- and price-conscious.As the new development creates a unique new environment in which to live, work and relax in the midst of the historic area, the most important part of the project was to keep the best of the stunning architectural heritage already there, whilst finding innovative ways to incorporate the latest modern building design. Helping to bridge this gap between the historic and the modern, AWMS offered a solution.“Alumasc systems were chosen as it was the project’s requirements to specifically use steel for gutters and downpipes,” David Loader, Key Account Manager at Alumasc, explained.

The Danish Church in London has been in existence, since 1696. Since 1952, it has occupied St Katherine’s, a neo gothic Church sited in the calm and secluded setting of London’s Regent’s Park, forming part of the Crown Estate.A recent refurbishment of the Church has been undertaken, overseen by Architects CF Møller and carried out by, main contractor, Coniston. The work included three new kitchens, communal spaces, and vicarage. GEC Anderson were employed to supply and install the three kitchens occupying two levels of the historic building. Liaising closely with the Architect, GEC Anderson were able to produce and install the required kitchen surfaces and fabrications as well as the required package of commercial kitchen appliances. Managing director of GEC Anderson, Martin Tye, commented “Space was very much a limiting factor in all three of the areas that we were involved with and so, it was a real challenge to be able to accommodate and include all of the necessary elements. Following the careful guidance of the design team, we were able to translate the requirements set out on paper into a tangible result for the client. This also involved meeting with the end user team and understanding the order of priorities.” Certain areas included high ceilings and so some tailored storage options were provided to maximise the useable space. Shelving and cabinets were included to provide the appropriate storage.

150 CheapsideBauder Hot Melt structural waterproofing systemSynopsis150 Cheapside is a new-build office development in the City of London, offering some 182,740 square foot of office space on eight floors. Overlooking St. Paul’s Cathedral, this landmark construction has recently gained an ‘Excellent’ BREEAM rating.Bauder Building BoardProject:              150 CheapsideLocation:           LondonRoof Area:         2000m2Investor:            St Martin’s Property InvestmentsArchitect:          Michael Auckett ArchitectsContractor: Knight AsphaltThe specificationThe client, St. Martins Property Investments, opted to use the Bauder extensive green roof finish, combined with Bauder’s Bakor waterproofing build up - a durable hot melt system installed at a comparatively low cost compared to traditional felt solutions.The resultWith both the waterproofing and the sedum blanket finish being sourced from one supplier, complete compatibility was guaranteed providing the client with an ‘immediate’ green roof finish and waterproofing build up with a life expectancy in line with that of the structure.System installedBauder Bakor 790-111 BauderPLANT E 42Torch-on root-resistant capping sheet green2 790-11 with reinforcement layerHot melt rubberised bitumen asphalt with a percentage of post-consumer recycled materials that infills and fully bonds to all minor deviations in the deck.3 DeckPrimed concrete.

The ProjectThe former Met Police HQ which has been redeveloped into a co-working space based on the banks of the Thames. Tintagel House boasts modern design co-working spaces, meeting rooms, roof terraces, bar, cafe, gym and cycle storage for its members. Bellsure were asked by Oakmont Construction to provide the cycle storage for this project. As requested by Oakmont Construction, we provided quotes on bespoke cycle shelters with a selection of cycle storage for the client. We also supplied CAD designs and .dwg files to build into the clients BIM model. The CAD files that Bellsure provided included specified materials, product recommendations, panel details and security fixings.The SolutionThe Streetsure team secured the contract and project managed the supply of the shelters and cycle storage to suit the contractors time frame and budget.For the cycle storage we supplied our Classic double decker cycle racks, Verti-45 semi vertical cycle racks and classic Citihoop stands. These were space planned strategically to fit as many spaces into the area as possible, and provide a greater return on investment for our client.Our bespoke CuvaSpan cycle shelters were the chosen option for this project. The shelter was a bespoke powder-coated steel frame with a PETG roof. Our installers worked alongside the site manager to ensure a smooth snag free handover - complete with an enhanced operations & maintenance manual. 

The ProjectA well established contractor asked us to provide a range of products on a supply only basis. Using the experience and knowledge of the Streetsure team, we offered a variety of products that suited the specific elements of the brief. We supplied CAD designs and .dwg files to build into the clients BIM model. We provided quotes on a mix of bespoke and standard range cycle parking, corner protectors, mesh panelling, mailboxes, lockers, benches and planters.The SolutionThe Streetsure team secured the contract and project managed the supply of these products to budget and within an agreed timeframe.We supplied Double Decker Cycle racks, space planned strategically to fit as many spaces into the area as possible along with corner protectors to reduce any damage when loading/unloading bicycles. Our ‘08 series’ recessed option was the mailbox of choice for this project. We sent off for an anomatch colour - a bespoke colour which we purchased and applied at the manufacturing facility to create a unique one-off product, perfectly matched to the architects specifications. Streetsures secure lockers were supplied for a key fob access mail room. Bespoke STRATA timber benches with steel legs and aluminium planters, powder coated in RAL 8028 were supplied for a resident only access rooftop location, creating a unique viewing experience over the London skyline. 

Installer – Dearneside Fabrications LimitedMain Contractor – Taylor WimpeyArchitect – PRP ArchitectsClient -Taylor WimpeySystem- Vantage® CS (Coping / Capping system)Loyal customer and expert installer, Dearnside Fabrications Limited contacted us about utilising our Vantage® CS coping on this exclusive residential scheme next to the Chelmer River, Chelmsford, south east England.BTS Vantage® CS system was chosen because it has been designed with many advantages over standard pick and mix systems.Although every CS installation is engineered individually, the coping system is always very quick and easy to fit on site. It is always clipped on ensuring no fixings pierce the top side or front face of the coping. The only visible fixing is located on the inside wall. The capping is located on a robust extruded alloy bracket with specially designed grooves that include a rubber gasket, ensuring a snug watertight and anti-drum fit.The photos do not do the system justice as there is no butt straps needed leaving nice smooth lines and where corner junctions are needed, they just slip into place!As always BTS take great pleasure in supporting a key customer on such a prestigious installation which is now helping to deliver 421 new homes in a thriving riverside quarter development.Dearnside Fabrications Limited

Canal Architectural were approached to design, manufacture and install luxury feature staircases, balustrades and screens for a commercial space in Bond Street. A leading commercial design company collaborated with the Technical Sales Team to engineer bespoke architectural metalwork for this world class project.The 14,500 sq ft of commercial space in the heart of London was developed to connect its employees and working spaces together over 10 floors. The Zig Zag profile staircase structure and flat bar balustrade featured hidden structural steelwork supports with a site applied bronze effect paint finish. The fully cantilevered stair structure spanned over 6 floors and featured flat bar balustrades and underside soffit panels, all site sprayed in a contemporary bronze effect finish. Another staircase structure spanned over 2 floors and featured hidden structural steelwork supports, wall panels and mild steel flat bar construction.Canal Architectural worked closely with the team to engineer various bespoke items for the development including bespoke planters, balustrades and screens. The entire development was transformed into a contemporary co-working space for the specialist real estate firm.The Canal site team worked closely with the contractor throughout the entire installation process to ensure smooth delivery in line with current building regulations. Canal Architectural are proud to have worked on this extensive redevelopment programme to engineer exquisite architectural metalwork designs for this landmark commercial space.

Fast-Track SolutionClient: Randox LaboratoriesMain Contractor: Corramore ConstructionScreed Installed By: O'Neill Concrete Flooring LtdScreed Supplied By: Robinson ConcreteCemfloor C30F6 was chosen for this project due to the fast-tracked construction of a new laboratory to provide urgently needed Covid-19 test kits.As part of their on-going commitment to produce much needed Covid-19 test kits; Randox Laboratories Ltd invested in a new facility at its existing headquarters in Crumlin, Co Antrim.The specialised laboratory, the development of which was fast-tracked over the space of four weeks, is the first step in a wider diagnostics investment programme from the company.Given the tight construction programme; Cemfloor were contacted and asked to propose a solution for the project.Cemfloor CT C30F6 was specified and over a period of just 2 - days; 3800m2 was installed by O'Neill Concrete Flooring Ltd with the screed being supplied by Robinson Concrete Ltd.Due to the high early strength of Cemfloor C30; the screed was loaded with access lifts 3 - days after installation which ensured that the build programme was able to continue with minimal disruption.A liquid surface DPM was used to allow the vinyl flooring be installed onto the screed only 7 - days after installation.Due to the incredible amount of effort by all parties involved; the entire project finished ahead of schedule with no issues.

The Old Court House was on the verge of collapse when purchased by its current owner. The Local Planning Authority had placed a Section 106 agreement on the property detailing its rescue from dereliction and were preparing to increase its listing status to Grade I as it was rumoured to be a hunting lodge gifted by Queen Elizabeth to Robert Dudley, 1st Earl of Leicester. Dating carried out during the course of the works confirmed that the building had been constructed in phases between 1526 and 1613.A team, including the client, Harrison Brookes Architects and Speller Metcalfe Contractors worked closely to bring this house back to life using a range of conservation skills and employing specially made components (bricks and tiles) combined with modern technologies. The Clement 3 range of Conservation Rooflights in a tile profile were chosen to be in keeping with the property’s appearance.Rhys Brookes from Harrison Brookes Architects said “This Grade II listed building was in a dilapidated state and required meticulous and painstaking reconstruction. The inclusion of Clement’s Conservation Rooflights helped us to stay true to the original character of the property whilst also meeting the demands of Building Regulations.”The project has won numerous awards including; RIBA Conservation 2018, the RIBA Regional Award West Midlands 2018 and the RIBA Project Architect of the Year Award 2018.

A major live arts venue, that in its heyday hosted The Beatles, Buddy Holly, the Rolling Stones and Cilla Black, has been restored to its art deco glory with the help of Crittall windows.The Globe, Stockton, is the biggest live entertainment venue between Leeds and Newcastle and will re-open shortly with a capacity of 1,650 people seated or up to 3,000 standing.The re-birth is eagerly awaited as the theatre has been closed for the past 45 years. A major refurbishment and restoration programme has been led in recent times by Stockton-on-Tees Council, supported by grant aid from the National Lottery Heritage Fund.The Grade II listed building dates from 1935 and was designed by architect Percy L Browne. Crittall windows were installed originally and these have been replicated in the restoration by the use of bespoke Corporate W20 profiles finished in Turkish Blue. Crittall cold form doors were also supplied.Anthony Dillon, managing director of main contractor Willmott Dixon said: “It has been fantastic working on the restoration of the Globe Theatre, breathing new life into a really iconic building for the community. We look forward to seeing it become a cultural hub once again for future generations to enjoy.”The theatre will play a central role of the Tees Valley Combined Authority’s ambition for the sub-region to be named City of Culture 2025.

When developing new buildings, it is always important to consider the environmental impact. Responsible sourcing of materials is high on every priority list, along with reducing waste to landfill. But what about the local impact, such as the effects on local wildlife? A living roof/green roof system, such as the one installed by the Premier Contractor at Seaford Head Golf Club, is a very clear example of the steps that can be taken towards reducing this impact and providing an alternative space for wildlife to inhabit. A warm roof system was installed onto a structural plywood deck, after which a vapour barrier and insulation boards were mechanically fastened to provide both thermal efficiency and air leakage control. After the underlying installation had been suitably restrained in accordance with a site-specific wind uplift calculation, the roof membrane was mechanically fastened to complete the waterproofing system. Our PVC roof membranes have been tested and can be utilised without the need for additional root prevention barriers (test standard EN 13948), and because PVC is extremely lightweight, they are the perfect choice for these applications, reducing pressure on the underlying structure. In conjunction with our Living Roof/Green Roof specialists, a site-specific living roof system was supplied and installed over the completed waterproofing.Waterproofing System:DANOSA Single Ply 1.5mm - AnthraciteConstruction Type:New BuildWarm RoofSector:LeisureApprox. Size:900m2Warranty Period:20 Years

Products:OS211 Orbis Glass Infill Top Fix Stainless Steel BalustradeOS251 Orbis Standalone (No Infill) Powder Coated Double Handrail BalustradeContractor: Read ConstructionArchitects: AHR ArchitectsIt was great to work with Read Construction on this new two storey extension to St John Plessington Catholic College. With a total project value of £1.3m, the vision was to create a new state of the art Sixth Form Centre with significant internal renovations prior to the extension to enhance existing spaces.Deltas role in the project consisted of supplying and fitting:68m of our Orbis OS211 Glass infill Balustrade System with Stainless Steel Handrail to the internal atrium and stairs.37m of powder-coated Orbis OS211 Top Fix Glass infill Balustrade Systems to the external retaining wall.27.5m of powder-coated Orbis OS251 no infill balustrade with a double handrails to the external steps and ramps.Aside from balustrading requirements, this education sector project introduced an open plan learning centre, media room, eight new classrooms, and new break out space with a canopy for students. The outcome has exceeded expectations and created an adult-focused learning environment for sixth form students, similar to a university setting, as well as providing more space for the increasing pupil numbers at St John Plessington Sixth Form College.Image credits: Read Construction Holdings Ltd

Situated in the middle of the London Borough of Hackney, Will Wyatt Court is a 511-room residential building providing student accommodation.ChallengeRoofing & façade contractor Russell Roofing Ltd were contracted to carry out refurbishment works externally on the Will Wyatt Court building - recladding and subsequently transforming the building with BTS Façades and Fabrications' Vantage® IP Interlocking Plank rainscreen system in alternating metallic colours.SolutionThe rainscreen panel used has a secret fix fastening system, which means that the majority of the fasteners are hidden - but the remaining exposed fasteners have to colour match exactly the panel in order to blend in with the building.Using Fixfast DrillFast low profile lacquered fasteners, Fixfast were able to colour match the fastener heads so Russell Roofing could install the fasteners knowing they'd match perfectly with the external panels.Fast forward to 2023 and Russell Roofing were awarded 'best refurbishment project' in the 2023 UK Façade Awards for the Will Wyatt Court refurbishment and re-cladding of the building. "Working with Fixfast at Will Wyatt Court was a great experience all round. Their unwavering commitment to providing technical support, cost-effective solutions, and exceptional customer service has not only streamlined our processes but elevated the overall success of the project."Frazer Simpson - Director at Russell Roofing Ltd

FOAMGLAS® T4+ (Slab)Design Architects: C.F. Moller & Purcell Miller TrittonMain Contractor: Bovis Lend LeaseApplication: Compact Roof - Gallery Roof & Restaurant Terrace FOAMGLAS® S3 (Slab )Finish: PaversFOAMGLAS® insulation was specified for the new gallery terrace and restaurant of the National Maritime Museum. With limited height available upon the roof there was no space for a concrete screed to falls. Therefore, architects Purcell Miller Tritton needed a factory machined tapered insulation with a slope to shed water. In addition, the limestone terrace paving must withstand the loads imposed by vehicles and so the insulation beneath had to withstand these dynamic loads without any compression.FOAMGLAS® T4+ slab insulation was specified for the project due to these conditions. FOAMGLAS® does not move or deflect under loads, and is available factory machined with a tapered slope. Its thermal performance is reliable and permanent and it is guaranteed for the lifetime of the building. The new roof of the gallery has paved areas, and green planting with hidden drain age and water supplies.The restaurant terrace gives wonderful view of the World Heritage Site, Greenwich Park and the Royal Observatory. The gallery has some fascinating objects; including jewels which belonged to Sir Francis Drake, journals written by Captain Cook’s during his long voyages, and personal items that survived the sinking of HMS Titanic.

When Hoskins Architects were commissioned to design new headquarters for the National Theatre of Scotland in Glasgow, an ingenious bit of reusing, repurposing and recycling took place. The new office space and social areas were fitted with a previously used Junckers sports floor, complete with the old line marking paint. Named Rockvilla, the new facility brings together departments previously spread across several sites - rehearsal rooms, a learning and community suite, wardrobe department, production workshop, technical store as well as office space and social areas. The building, housed in a redevelopment of a disused warehouse, retains an industrial aesthetic in a nod to the history of the site. The interior features a limited use of materials, of which the reclaimed Beech sports flooring becomes a focal point. For this project, Junckers SylvaSport Beech salvaged was installed. The worn look of the reused floor with its randomly placed line markings in various colours worked perfectly with the rest of the interior and the client decided to leave it as it was. As it’s made in solid hardwood, an old Junckers sports floor can also be sanded and refinished up to ten times without losing its good looks and performance. Reclaimed Junckers sports floors are not for sale through Junckers but can be sourced through our network of specialist Approved Contractors. Please contact us for further information. Photography: Gillian Hayes, Dapple Photography