"resin based flooring"

A single storey timber frame house, based on Passivhaus principals with specialised wheelchair access, situated in Fife, Scotland.

The challengeThe building housed old conventional hand dryers which hardly dried the hands and were very energy hungry. The requirement was that new units dried the hands quickly enough, but also were energy efficient. “They make the place more hygienic and people are less inclined to use toilet roll.” Jonathan Newey - Centre Director, St Werburghs Community AssociationAbout St Werburghs CentreBased in St Werburghs in East-Central Bristol, they serve the local communities and communities of interest across the city. Managed by the St Werburghs Community Association, it aims to provide accessible and affordable meeting rooms and facilities for individuals, community groups and voluntary organisations. Rooms are offered within its characterful Victorian building or contemporary and eco-friendly Annexe.The solutionThe Ecoforce hand dryer can run at just 500W and still provide a dry time that satisfies all user expectations. A low noise hand dryer suitable for all demographicsModel: Dryflow EcoforceDry time range: 20 – 25 secondsRated power: 500W – 1250W (On/Off heater switch)Guarantee length: 3 yearsThe resultsEstimated annual cost to use old hand dryers: £180 (based on 12p per kW/h) Estimated annual cost to use new hand dryers: £18.90 - £47.25 (based on 12p per kW/h)Annual cost savings: £132.75 - £161.10Estimated annual old hand dryer carbon production: 810 Kg/CO2 (based on 1kW = 0.54 kg/CO2) Estimated annual new hand dryer carbon production: 85 – 212.63 Kg/CO2 (based on 1kW = 0.54 kg/CO2)Annual carbon savings: 597.37 – 725 Kg/CO2Estimated return on investment period:Payback period: approx. 3.9 – 4.7 years

A Gloucestershire based independent care provider has recently completed a 46 bed extension on their care home for clients with dementia and nursing care requirements. Having worked with the contractor on a similar project, Astor Bannerman were recommended to the company to supply ceiling track hoists in an effort to future proof the needs of the home. With floor space at a premium, the company wanted to move away from the traditional style mobile hoists, which need to be stored away when not in use. Also, as using a ceiling hoist system normally only requires one carer to operate, this enables the company to adapt to the possible implications of Brexit on staffing levels.During the installation, we successfully added an XY (H-frame) hoist system into 3 assisted bathrooms and added 3m straight track OT200 hoists in 6 bedrooms allowing simple transfer in an out of bed.Fixings were also installed during the main build in the remaining 40 bedrooms, enabling the care provider to retrofit track and hoists as and when they require them at any point in the future.

Artform Urban provides colourful external furniture elements to a new state-of-the-art Children and Young Peoples' Mental Health Service (CYPMHS) inpatient unit for West Yorkshire. Based at the St Mary’s Hospital site in Armley, Leeds, the five-year project led by Leeds and York Partnership NHS Foundation Trust opened in January 2022. The new facility comprises a 16-bed general adolescent ward and a 6-bed psychiatric intensive care unit all supported by an expert team to offer a range of therapies and support. The building wraps around central courtyards to provide dedicated access to garden spaces at all times. In total there are 4 separate outdoor spaces all have been furnished by Artform Urban Furniture. The primary products specified by Ares Landscape Architects are the Loop range of street furniture; including curving loop benches, conical picnic sets, and Hop Op 500 stools. The products are ideally suited to CAMHS units due to the minimal design and lack of any removable fixtures. The Loop range is formed of rotationally moulded Polyurethane which creates a soft and flexible surface with no sharp edges - this was a key factor in why these products were chosen. The Loop range is also lightweight and can be easily positioned and secured in place using hidden fixtures or alternatively filled with sand or water to be self-weighted units that can be moved as and when required.A bespoke element has been introduced with circular sheets of HPL (High-Pressure Laminate) being added as table toppers to achieve a tamper-proof finish. HPL is manufactured by combining sheets of recycled paper with a binding resin under high pressure - achieving a robust weather-resistant material ideal for external environments.The playful design and inviting colours create a positive and calming atmosphere encouraging time to be spent outside in the fresh air. In the larger garden space, several Stone benches have been installed - in various finishes. The pebble-like design sits naturally in the leafy garden and creates an impromptu social space.In order to facilitate client timings, Artform provided an installation service as well as advice/ guidance during out-of-usual operational hours between Christmas and New Year.For the final installations - Full coordination with the management team was required at Red Kite View as it was now a live site. It was imperative there was no interruption to the patient’s routines while the products were moved through the building and installed.The building was designed in collaboration with clinicians and young people who all contributed their ideas, hopes, and aspirations for care. They also helped to decide on the name ‘Red Kite View’ as nature is strongly associated with mental wellbeing and rehabilitation.

The Host Helix building, also known as the “Helter-Skelter,” was a unique and striking structure built in 2011 with stunning views of North London and Wembley Stadium. Over time, the building experienced general wear and tear and water began to enter the buildings’ complex structure.Polyroof Products were called in to consult with the clients and offer a seamless, encapsulated solution that could address the many unusual details associated with the building’s design.The SolutionA full survey of the roof terrace areas was conducted by the Polyroof Technical Services, after which a bespoke specification was produced for the works. The proposal document detailed a comprehensive set of recommendations for producing a seamless solution to encapsulate the problematic roof, therefore solving the issues that had arisen over the years due to its condition and age, as well as the issues associated with the original design of the pitched, curved roof.Polyroof SA Carrier Layer was then applied over the cement particle boards with Polyroof pre-formed GRP Drip Trims fixed to the external edge. For continuity and to create a uniform finish, the SA Carrier Layer was extended onto the main roof sections as a substrate for the Protec system.Any details requiring local reinforcement were treated with Protec Resin and 75mm wide Polymat 450. The curing process was allowed to take place. To accommodate structural expansion / contraction movements at appropriate details, 25mm disbondment tape was installed prior to local reinforcements.The first coat of Protec Resin and Polymat 450 was applied at a minimum coverage rate of 1.3 – 1.5Litres/m² (0.66 – 0.77m²/Litre) and was allowed to cure. To complete the system, a second coat of Protec Resin was applied at a minimum coverage rate of 0.5Litres/m² (2.0m²/Litre) and was allowed to cure.ComplexitySuch an iconic building in the local community, the client wanted to protect the original aspects of the building to the fullest extent, so the Protec system installed at the perimeter was color-matched to the original blue and grey colours. This was achieved by blending pigments until they matched the desired colors, in turn the pigment was then blended into the Protec resin before application. The survey revealed concerns about the original building designs from 2011 and the roof’s drainage system. Due to the roof’s pitch, rainwater was cascading down the curved slopes at high velocity and causing water to bounce into the building under the original capping.After many discussions between the main contractor and Polyroof, as well as the provider of the external cladding, it was agreed that the perimeter detail needed to be encapsulated with the new waterproofing system to prevent further water ingress. Fire-retardant cement particle boards were fixed to the internal and top faces of the external parapet walls, and the Polyroof SA Carrier Layer was applied over them with Polyroof pre-formed GRP Drip Trims fixed to the external edge.The Protec System was then applied to encapsulate the entire parapet detail, meaning its waterproof integrity would be covered under the Polyroof Guarantee. The curvature of the building added complexity to this process, and the contractor took great care in cutting the trims to size and fixing them to the external edge to ensure they followed the profile of the structure. Due to the building’s height, all the trims were face-fixed to prevent wind uplift.WorkmanshipIn order to improve drainage and prevent water from accumulating in hotspot areas of the roof, the contractors were instructed to install new internal curved gutter channels at the point where the roof and building met. These channels were designed to have a sufficient height and angle to effectively direct rainwater towards the outlets, preventing water from pooling on the roof. However, the installation process was made more complex due to the curved nature of the building’s architecture, which required careful measurement and customization of the gutter channels to fit the unique shape of the building.Additionally, the contractors had to consider the many joins of the gutters and how they would hold up to the elements over time as the building structure expands, contracts and moves. Extra steps were taken to ensure the gutters liquid membrane was properly sealed and secured to prevent leaks.The contractors were instructed to repair all protrusion and mansafe post details as necessary in order to allow the Protec System to be installed to a minimum height of 150mm, and to terminate it underneath a suitable weathering flange or jubilee clip. In addition, all right angles were to be reinforced with double taping. Any protrusions that were liable to significant movement was required to have disbondment i.e., bond break, tape applied to it to stop the external coating from stressing on expansion. Furthermore, all pipes were to be abraded, solvent wiped, and where necessary, primed in accordance with the Polyroof coatings manual. A flashing detail was also to be created with a weathering flange or seal.All outlets were inspected to ensure that they were functioning properly. Any outlets that were deemed unsuitable were replaced with new ones. The outlets were cleaned, prepared, and primed as necessary. The Protec system was then dressed into the outlets as far as was practical. The inspection and replacement of the outlets and the preparation of the Protec system helped to ensure that the drainage system functioned effectively.ConclusionThe refurbishment of the roof was completed within the client’s target timeframe and budget. Following a final inspection by Polyroof Technical Services, which highlighted quality workmanship of Tower Asphalt Ltd, the client received Polyroof’s trusted Accredited System Guarantee and now has the peace of mind the roof will be leak-free for decades to come.

The 760,000 sq ft development will bring the Old War Office back into use, creating a world class 5-star hotel and 85 apartments. Works will include developing a six storey basement and constructing a three storey roof extension. The venue has been designed by UK-based EPR Architects, with the hotel interiors designed by New York-based designer Thierry Despont, and the residences by 1508 London. A1 Fire Rated Breather and Vapour FR Membranes were used to protect the insulation and building interior, maximizing its energy efficiency and value.

Take a look at the various systems on display at our showroom based in Clerkenwell, London - including a range of both solid and glass partitions.

Take a look at the various systems on display at our showroom based in Clerkenwell, London - including a range of both solid and glass partitions.