"kitchen cabinet"

application area: commercial kitchen extractuse type: school kitchen air extractionproject scope: line brick duct with four linersadded value: 25-year guarantee on liner, no need to fit and maintain chimney fansBackgroundVentilFlex-25 engineers were to supply and install a bespoke kitchen canopy solution for a grade 2 listed school building in Hampshire. The bespoke canopy could not be fixed to the walls or the ceiling, which was 14 meters high.The 20-metre ventilation shaft had metal supporting crossbars. This made it impossible for any rigid extraction ducting system to be installed without affecting the integrity of the structure. The client opted for a kitchen extraction system with a different approach – VentilFlex-25 RKV – a composite liner solution supplied in a flat and soft state. The bespoke-made liners are useful for ducts where access is difficult or if the duct has bends and offsets.The main challenge of this installation was to insert and inflate 4 VentilFlex-25 RKV liners simultaneously. This way the liners would fill the available duct space evenly and act as a single large liner.Statement of workThe steaming took a few hours, during which the high temperature started a chemical reaction in the composite structure which solidified the resin and gave the liners their final physical characteristics – tensile strength, high corrosion-resistance, high heat-resistance and an air-tight finish. The new VentilFlex-25 RKV liners provide an outlet for the gases coming from 3 combi ovens, 2 range ovens a fryer and a grill.

The new £9.7 million Kitchen Garden Enclosure development at Cambridge’s Wellcome Trust Conference Centre, designed by Abell Nepp, features Ash & Lacy perforated panels that incorporate a complex wildlife illustration.

OBJECTIVEFor more information about the Bushboard products, request a RIBA CPD, download an NBS specification or order samplesvisit www.bushboard.co.ukLadybarn Community Centre in Manchester recently secured funding to give their kitchen a much-needed makeover that it deserved, Team Moregeous Design stepped up to the challenge.‘I wanted people to be wowed when they walked in but equally we had to keep to a budget. We had four days to completely transform the room.’Bushboard’s laminate lets the customer go high on looks, while keeping the cost low. Their idea is that everyone deserves great design whatever the budget underpins the Bushboard ethos of smart surfaces, clever ideas.Observation‘I had saved an inspirational room shot from deVOL that I wanted torecreate but I needed to be smart to achieve the style as I was on a budget.I attended KBB 2018 as it is always inspiring and showcases cool new decors. I visited Bushboard’s stand and saw all their impressive designs but the one that caught my eye was Turin Marble from the Options range.The samples from Bushboard arrived quickly and were a decent size. The information both online and in brochures is clear and easy tounderstand.’Bushboard offer free of charge samples that will be delivered to the customers door within 72 hours. As they understand how important the decision is.Turin Marble makes a luxury statement in any kitchen. The distinctive design is printed in life-like proportion to truly echo nature.Outcome‘I couldn’t be happier with the end result, I love it. The worktop is bold and dramatic but not overwhelming. It has wowed everyone.’The Options range has stunning laminate designs truly reflectingBushboard’s ethos of bringing smart surfaces and clever ideas.‘Classic, stylish, affordable luxury.I’ve specified Bushboard before over the years and have never beendisappointed. The new range is a step ahead in terms of on-trenddesigns and style. Brilliant!’‘The range is a step ahead in terms of on-trend designs and style. Brilliant

IssueEstablished in 1916, Doylestown Country Club is a private country club located in Pennsylvania, USA. In addition to its reputation as one of the top golfing destinations in the state, the Doylestown Country Club’s culinary team strives to create memorable dining experiences for all members and guests. To achieve this goal, the country club has created a new space to elevate kitchen safety and ensure efficient back-of-house operations.ApproachDoylestown Country Club wanted a floor that would provide comfort for their staff, who spend prolonged periods on their feet. Other considerations including reducing noise transferrence in a busy commercial kitchen and having a floor that could be installed around the kitchen drains which required a watertight, seamless transition with the flooring.SolutionAfter consultation between the Altro sales and technical teams, together with the flooring installer and specifier, 350sqm of Altro Stronghold 30 was specified, keeping staff safe from slips and helping to reduce fatigue thanks to its 3mm thickness.Altro Stronghold 30 achieves Altro’s highest rating for slip resistance (PTV ≥55, R12) and is designed to minimise risk in wet and greasy conditions for the lifetime of the flooring. As well as helping to keep staff safe from slips, it also helps reduce their fatigue, thanks to its 3mm thickness which provides noise reduction and comfort underfoot.

At the Paris-Le Bourget airport, Air Culinaire Worldwide has just moved into its new kitchen. The kitchen, corridors, locker rooms, preparation rooms (hot and cold) and the storage rooms were fitted with Altro Stronghold 30 on the floor and the Altro Whiterock White on the walls.

The Allsop family started planning their kitchen renovation project in September 2021 and wanted to create an inviting room featuring special touches such as glass work surfaces alongside the latest in energy-saving technology. As they had already installed underfloor heating in their home before, they knew that an electric floor heater would be the ideal heating solution due to its ease of use, sustainable technology, and low running costs. The DCM-PRO was chosen as the most efficient solution, offering rapid installation times and increased and huge savings on energy bills due to its efficiency, further enhanced after being paired with our 6iE Thermostat. This system was perfect for use with the Allsop’s new Karndean vinyl floors and is also ideal for kitchens with stone or ceramic floor tiles as its decoupling technology helps protect tiled floors from damage. The low-profile design of the DCM-PRO is also perfect for all types of refurbishment projects in rooms with fixed ceiling heights as it will have a negligible impact on floor levels.

Four Formica® Laminates from the Formica® Collection transform a residential kitchen project with bespoke carpentry. Laminate was chosen to create kitchen doors, shelves, worktops and even an accessible spice rack and a matching dining table. All decors chosen featured a Matte58 finish offering a smooth texture that provides low-level light reflection and minimal maintenance for the owner. 

Bioethanol fires require no chimney or flue, give off no harmful emissions and are 95% energy efficient. They are available in a large selection of designs for living rooms, kitchens, bedrooms, bathrooms and gardens. A good example is the home of Bury resident Anthony Norman, who chose an Italian kitchen and a British made bedroom from local dealer Icon, both featuring table-top bioethanol fires. Anthony and his family were convinced that they would make exciting additions to their new kitchen and master bedroom. Ebios bioethanol fires are made in Germany and distributed by DRU in the UK.

GEC Anderson were recently asked to provide replacement worktops, splashbacks and panels within a chic West London home.Although the existing units and joinery were in a very good condition, the composite worktops and panelling were beginning to show signs of wear. The brief was to remove the three existing worktops as well as their associated panels (splashbacks, side panels, back panels as well as one soffit panel) and to replace with brushed satin stainless steel equivalents. Included within the remit was the reuse of the flush fitting hob, pop-up extraction unit with it’s controls as well as the provision of a pop-up socket system.20mm plain edges were specified (GEC Anderson edge detail 7). The double sinks were from the modern Series A range. The project was measured, manufactured and installed by GEC Anderson.Founded in England in 1962, GEC Anderson has pioneered the development of made-to-measure stainless steel products. Today, the company’s range also includes standard and modular stainless steel options. Products include sinks, worktops, cabinets, shelving, splashbacks, doors and sanitaryware for use in domestic, commercial and specialist environments. All products are manufactured to ISO 9001 and backed by a comprehensive support service from planning and product specification to installation and maintenance.

The National Flooring Company, a Degafloor Ltd approved installer, have received another complimentary review following a kitchen refurbishment on the 23rd floor at a popular 4-star hotel in Manchester. Making the most of the quieter, New Year period, the hotel decided to upgrade their kitchen floor. Having worked at other locations for the popular hotel chain, The National Flooring Company were contacted to provide advice and following a successful proposal, were asked to complete the refurbishment. The kitchen, which is situated on the 23rd floor, required meticulous planning to ensure that works could be completed with minimal disruption to the hotel’s guests. The existing vinyl floor within the kitchen had become worn and brittle and sections were beginning to lift, causing a potential trip hazard. The vinyl floor was removed to expose the tiled finish underneath. Any loose tiles that had debonded from the floor were also removed and infilled with Degafloor Deep Fill, quick curing repair mortar.The National Flooring Company laid a scrape coat, embedded with a promesh reinforcing membrane, prior to the installation of the Degafloor Full Broadcast System (FB). The Degafloor FB system is broadcast with rounded aggregate to provide an anti-slip finish and retains this feature even in wet conditions to ensure employee safety is always maintained. As with all Degafloor systems, they are seamless and impervious, ensuring the floor will not lift, as previously experienced with the existing vinyl floor finish. Degafloor MMA resin flooring systems are fully cured within 2 hours of installation, allowing the hotel to resume normal kitchen operating procedures shortly after completion. MMA resins have a distinctive odour, but with the correct management, installations can progress with very little disruption. The National Flooring Company used the kitchen extraction system and sealed all doorways to contain and manage the odour.The project was completed to the satisfaction of the Chief Engineer, Hilton MCR, who commented on how good the floor looked. “The restaurant being on the 23rd floor presented a logistical challenge.  However, after careful planning and consideration of our hotel operations, The National Flooring Company completed the installation efficiently and to a high standard.  We were impressed with the service from start to finish.”

GEC Anderson stainless steel worktops were put to good effect in this smart domestic kitchen.A curved breakfast bar forms the centre piece of the design but there are worktops to two of the perimeter walls. Extra deep edge profiles were specified and, of course, sinks are fully integrated within the worksurface.

AEG walked away with the large kitchen appliance brand award in recognition of the high-scoring products Which? has tested this year across a good range of categories and budgets.In particular, the brand offers a large selection of home appliances, many of which excel in our lab tests. This year, half the AEG appliances we’ve tested have earned our Best Buy seal of approval. With affordable Best Buys and reliable products, AEG is a worthy winner.

A beautiful mix of a traditional kitchen with modern roof-to-wall glazing by Cantifix has successfully incorporated roof shading to reduce heat and glare.R30 Zipped Roller Blinds were specified by DUST Architecture with the roller mechanism concealed within the back wall of the house. The side channels were powder coated to match the glazing structure. Blinds were made using Goodrich 1% Screen material to provide maximum protection without reducing noticeable light.

GEC Anderson stainless steel worktops were included in a recent Cornwall kitchen refurbishment, designed and installed by George Robinson Kitchens who produce hand crafted, bespoke kitchens, near Penzance. For homeowners, Mr. & Mrs. Bull, the choice of materials was pivotal to the design of their home kitchen, particularly, as their long-term plan is to use the space as a cookery school. Stainless steel was therefore a key element and was chosen not only for its visual properties and low lifetime cost but also for its ability to withstand heavy usage, to be heat resistant and to remain germ-free. From a visual perspective, the work surfaces make up a significant proportion of the colour and texture in the room. In this Georgian property in Cornwall, the materials and textures chosen make for an eclectic yet functional space. The inherent durability and unsurpassed hygienic properties of the brushed stainless steel elements from GEC Anderson will make it perform extremely well as a professional kitchen. The Tulip wood and Oak wood with its different painted finishes together with the white Silestone quartz top on the central island top provides a striking contrast to the stainless steel in one corner, giving a light and pleasant, contemporary, feel.The L-shaped brushed satin stainless steel worktop and integral sink is made to measure and benefits from being manufactured in one continuous piece thus maximising the use of space in the corner in which it is situated. Furthermore, with no joins at the sink bowl, edges and upstands, the surface remains germ free as well as being free of visual clutter and noise. One side of the L-shape includes a generously sized (500x400mm) single bowl and draining area, whilst the other, provides useful and practical work surface. A 100mm high, integral, back upstand was also specified, providing a neat, practical and watertight junction to walls.Owner Dr Matt Bull says, “My wife and I liked the toughness of the stainless steel and the fact that it can take hot and cold, doesn't stain, reflects light and provides an hygienic surface that is easy to clean. Stainless steel also gains character as it ages, where many surfaces will deteriorate, so that’s a real bonus.” He added, “We struggled to find anyone locally who could manufacture the stainless steel elements of the kitchen to a sufficiently high standard. The neatness of the welding and the configuration of the shape, drainer recess etc. were key to what GEC Anderson could offer.”GEC Anderson stainless steel worktops are supplied fully sound deadened, plastic protected 

KAL is a member of the Gowan Group, a family-owned holding company, directly controlling many successful trading companies as well as significant property holdings and financial investments in public and private companies in Ireland, Northern Ireland and the UK.The largest appliance distributors in Ireland, KAL rely on a 30,000 square foot designer showroom for unique kitchen and domestic appliances. Their showroom at Dublin’s Citywest is one of the largest of its kind in Europe showcasing all their kitchen and consumer appliance brands.The ChallengeAfter conducting a survey of the 1,000m2 roof, it was determined that the areas of the roof, specifically the office area, were in need of repair. Some areas of the original roof build-up were starting to leak and lap joints failing due to a poor install.Following the site survey and adhesion tests, a site-specific specification was produced for the client and contractor to overview once all parties were happy with the proposals. With some complex detailing work involved, a decision was made to overlay the existing roof build with Polyroof Protec System.The SolutionPolyroof’s Protec System, a hybrid polymer liquid system with extremely fast curing and installation times, was the chosen system of use for the project. Due to its fully cold-applied application, the works could be carried out during working hours, with little disruption to the office staff below and little working time lost for the client.IPRS Limited, an experienced roofing and panel repair contractor and Polyroof Approved Contractor, were chosen to undertake the work on the project. Firstly, before any work could begin, the original waterproofing of the office roof was pressure-washed and cleaned down. Once all initial preparation was completed, the Protec System application could begin.All areas requiring priming before the main system application were primed and allowed to cure. Any joints were sealed using taping mat and Protec Resin and allowed to cure. Once this preparation had been completed the main Polyroof Protec System, chosen in light grey by the client, was applied.The first coat was allowed to cure before the final coat was applied. Due the Protec System Rapid Cure technology, the finished roof could be walked on after just 30-60 minutes after applications. This allowed for large roof areas to be made fully waterproof within a matter of hours. After the inspection was completed, the client received Polyroof’s trusted Accredited System Guarantee.Taking away the challenges of flat roofing projects.Polyroof’s reputation has been built on the high level of technical support provided to clients before, during and after every contract. We like to work closely with our clients from the very beginning of a flat roofing project right through to completion and throughout the lifespan of the roof. From our experience, this is the best way to guarantee that all aspects of the roof are finished to the superior standards that our clients expect.

The Living Concrete team provided design consultancy and were selected to project manage the delivery of a new kitchen for a celebrity chef.The glass fibre reinforced concrete central island, table-come-workbench was manufactured using our special GRC BTX concrete, which is lighter and stronger than traditional concrete. We used our unique eco concrete mix technology with a hydrophobic agent to limit moisture absorption. The individual elements were precast in our workshop for assembly on site and then hand polished and treated with a specialist sealant. Large format GAP wall panels with concrete caps in Mist Rough finish completed the design.Living Concrete’s worktops and tables are extremely strong and durable and can be used indoors or outdoors. By using the best of modern technology, we have created a contemporary and elegant space that demonstrates how concrete can be both good looking and functional.

Pressalit’s adjustable solutions are helping residents at Blackwood House live their lives to the fullest. In the kitchen the CleverCogs technology means residents can readily raise or lower the height of Pressalit’s Indivo rise and fall kitchen work surfaces and wall mounted cupboards with a simple touch; the Indivo lifters also allow the wall cupboards to move forwards and downwards for easy access.

A Somerset based kitchen designer and supplier of bespoke appliances, as well as units and islands, has called on the services of GEC Anderson for the fit-out of her own home.

Lift lobbies in a central London office building were part of a total office refurbishment project on multiple levels. GEC Anderson’s stainless steel cladding contrasts effectively with the neutral wooden boarding to the opposing walls. The lighting, combined with the floor and ceiling finishes, complete the carefully and meticulously designed circulation spaces to provide a high quality, creative yet totally professional result.GEC Anderson were responsible for measuring, production, delivery and installation of the stainless steel elements that were supplied in phases to suit the stringent works program of main contractor, Sykes & Son Ltd. In advance of this, a significant amount of consultation and liaison with the design team was required to ensure that the detailing would be precisely as anticipated and required.GEC Anderson brushed satin stainless steel was used throughout but each and every section of the cladding was purpose made to provide an exact fit to the irregular walls as well as to allow for varying celling and floor levels. Managing Director, Martin Tye, comments “Getting the measurements correct was absolutely key to the finished results. It was quite a challenge, given the timescale and the fact that it was such a busy site where multiple trades were required to work in the same areas but the overall results were very pleasing.” He continues “Time and time again we see that the end result can appear so simple but achieving it can be rather complicated!”GEC Anderson, who are known mainly for their bespoke stainless steel kitchen worktops, also supply stainless steel cabinets, shelving, spahsbacks, panels and doors. Since their founding in 1962, much has happened in the world of stainless steel but there is a constant that lies at the core of it’s offering – the honest beauty and practicality of the unique material of stainless steel. It seems to be timeless.Founded in England in 1962, GEC Anderson has pioneered the development of made-to-measure stainless steel products. Today, the company’s range also includes standard and modular stainless steel options. Products include sinks, worktops, cabinets, shelving, splashbacks, doors and sanitaryware for use in domestic, commercial and specialist environments. All products are manufactured to ISO 9001 and backed by a comprehensive support service from planning and product specification to installation and maintenance.

In a secluded corner of the Northern Highlands lies Skibo Castle, home to the Carnegie Club, an exclusive members club offering the best of Scottish hospitality & grandeur. Gratte Brothers designed and installed the new kitchen with Gavin McDonald Flooring. As part of the design, Gratte Brothers selected a range of Altro floors and walls to meet the exacting standards of the brief. Altro floors and walls are Hazard Analysis and Critical Control Points (HACCP) approved meet all current European Union (EU) Directives on health and hygiene, making them particularly suitable for use in commercial kitchens.

In a secluded corner of the Northern Highlands lies Skibo Castle, home to the Carnegie Club, an exclusive members club offering the best of Scottish hospitality & grandeur. Gratte Brothers designed and installed the new kitchen with Gavin McDonald Flooring. As part of the design, Gratte Brothers selected a range of Altro floors and walls to meet the exacting standards of the brief. Altro floors and walls are Hazard Analysis and Critical Control Points (HACCP) approved meet all current European Union (EU) Directives on health and hygiene, making them particularly suitable for use in commercial kitchens.

THE PROJECTTo help with the remodel of Poppenpohl Groups studio on Wigmore Street London we provided a replacement awning for their shopfront. The studio houses luxury kitchens for high-end projects, offering consultations and design services for clients across London and surrounding areas.THE CHALLENGETo match the design used in the remodeling each patio awning needed to be the same colour and be as discrete as possible once closed to match the buildings facade.THE SOLUTIONThe Weinor N2000 patio awning was chosen due to the fact it could be recessed into the building facade, and because it’s angular design lent itself well to the aesthetic of the shopfront. The project required two awnings with widths of 4400mm and 3500mm, and matching projections of 1500mm. The finish was anthracite with a dark grey fabric colour which matched the studios branding and overall impression of the building.

We travelled to London and sat with Sebastian and his wife Miriam who have just rejuvenated their kitchen area, so that it connects their home with the outdoors in a wonderful way by simply replacing and upgrading their rooflights.The old rooflights simply didn’t have the versatility that the family was looking for, so when it came to finding a set that offered them exactly what they needed, Sebastian and Miriam chose Vario by VELUX.Due to the position and functionality of the existing rooflights in the kitchen, the family quickly realised that it didn’t fit their needs, discovering that the room became hot during the summer months and because of nearby foxes, they couldn’t safely leave their façade windows open without worrying about inviting unwanted visitors into the home.“We moved here in the middle of winter,” Miriam explained, “So we didn’t understand how hot it became inside over the summer months. What we needed was ventilation to cool it down over the summer. We chose to replace the rooflights, as the ones that we had were static and didn’t allow ventilation and these are amazing for that.”Sebastian discussed how working closely with Vario by VELUX allowed the family to get exactly what they wanted and how they were able to create a home that truly met their needs. “Vario by VELUX were the only ones that offered bespoke windows that could open, and when you’re away, if it rains, they close.”“I did everything online. I went to the website where they have this Build Your Own 3D configurator and I chose the window I wanted, the colour I wanted and the size I needed. I would definitely recommend everyone to use Vario by VELUX for installation, delivery and to receive support and warranty, which is very important.”An incomparable differenceThe impact that the new rooflights have had on the family has been remarkable and really had a positive impact, as Miriam explains. “The contrast between a fixed rooflight and one that opens is incomparable really - cooking smells are out very quickly, you can cool the room down and it never gets too hot in here, it’s not just a bit of glass in the roof, it’s a bit of tech that you can use and integrate into your life.”“The two Unlimited Rooflights have really impacted the room with the amount of fresh air we get in there.”“I get up for work very early, about 6am,” Sebastian adds, “And before having these windows, the room was just hot and you could feel the lack of air, now, when I come down the window has been open and it makes a difference.”“It’s made the whole house cool. We now have a movement of air through the house that we didn’t have before. I think it’s a really lovely way to be connected to the outside - you see the seasons change, you can watch the roof splatter with raindrops - my daughter loves watching that when it happens - and the bifold doors plus rooflights really make this an integrated room with the garden. You have a bit of the outdoors inside here.”

Weston-super-Mare’s Revo Kitchen & Terrace Restaurant has been transformed with high-quality floor to ceiling Kestrel Aluminium Folding Sliding Doors that maximise the views and create a fresh, airy space that allows natural light to flood in.

Four metres of stainless steel provides a ‘model’ worktop solution for one of the UK’s top fashion and photographic model agencies. Take 2 Model Management had the worktop installed in its new London offices, where it plays a key role in boardroom catering. The worktop was supplied by GEC Anderson, specialist in made-to-measure stainless steel products.Take 2 has on its books many top international and local models who feature on fashion catwalks and in campaigns for leading brands. Founded 25 years ago by Melissa Richardson and Gabriella Palmano, the agency was based in Covent Garden until its recent relocation to a converted 19th century warehouse at Willow Street, Shoreditch, the heart of London’s fashion district. The new premises includes a modern fourth storey boardroom, which is also used for general meetings and corporate events, necessitating a stylish and well-appointed kitchen-bar.  Bespoke manufacturer Woodbury Furniture Company was commissioned to build the kitchen-bar, with a stainless steel worktop specified by the architect. Woodbury designer Matthew King says: “We approached GEC Anderson for the worktop as we had worked with them on several previous commissions. They offer a wide choice of edge details and upstands, and can be relied on for seamless joins and a perfect fit.” The worktop was supplied in two sections to facilitate handling into the boardroom – via a spiral staircase. The sections were mounted on top of storage units and appliances and were clamp-jointed on site to provide a virtually seamless finish. A cut-out to accommodate a glass-top hob was provided, along with an integral 500mm x 400mm sink from GEC Anderson’s standard range. Melissa Richardson says: “It’s great – it looks lovely and it’s working well for us.” Woodbury and GEC Anderson also provided a 700mm stainless steel-topped teapoint with a 300mm diameter sink to serve staff and visitors on the lower floors.   Based near Exeter, Woodbury Furniture Company has a small team of craftsmen who produce custom furniture and kitchens in a variety of styles from traditional to contemporary. Matthew King says: “Stainless steel is an excellent choice for worktops because its seamless finish virtually eliminates the risk of leaks affecting storage or appliances.”  The GEC Anderson worktop and teapoint at Take 2 are made from satin finish stainless steel, which provides a hard-wearing surface that is easy to maintain to high standards of hygiene and retains an attractive appearance for many years. Founded in England in 1962, GEC Anderson has pioneered the development of made-to-measure stainless steel products. Today, the company’s range includes bowls, worktops, cabinets, shelving and sanitaryware for use in domestic, commercial and specialist environments. All products are manufactured to ISO 9001 and backed by a comprehensive support service from planning and product specification to installation and maintenance.

Here is a great example of how to maximise the use of space within a very compact central London studio apartment.GEC Anderson supplied and installed the stainless steel worktop, incorporating sink and hob, as well as the oven housing above.

Stainless steel island worktop with deep edge (7), integral sink bowl and cantilevered end. L-shaped worktop supplied in one piece. Stainless steel worktops were also supplied to each side of the Aga and in the separate utility room.All worktops are in EN 1.4301 grade brushed satin stainless steel.

Cross contamination is a concern for any food prep area dealing with raw meats. With the help of BioCote Technology (found in BioClad products) restaurants can ensure they uphold the highest level of hygiene within food preparation areas. The antimicrobial technology works 24/7 to eliminate the threat of harmful bacteria such as E.Coli. In addition to its proven antimicrobial protection, the BioClad antimicrobial cladding is extremely easy to clean.

Stainless steel island top with cut-out for hob and deep edge profile (GEC Anderson edge 7). Various worktops, shelves and panels.All in EN 1.4301 grade brushed satin stainless steel.

GEC Anderson sinktop with single bowl within wet zone, cut-out for hob, integral upstand and custom edges.EN 1.4301 grade brushed satin stainless steel.

The responsive service and high standard of craftsmanship offered by stainless steel specialist, GEC Anderson has led to the manufacturer repeating the success of a previous collaboration with a design practice renowned for its expertise in historic buildings: creating a commercial style kitchen within a very confined space in the undercroft to London’s French Protestant Church.  Although it was established in London by Royal Charter five centuries ago in 1550, the French Protestant Church’s current home in Soho Square was designed by Sir Aston Webb and was completed in 1893. The current contract came about partly as the result of an aspiration for improved facilities, able to cater for larger numbers of people and a pressing need to replace the sub-structure’s failing tanking system. Caroe Architecture Ltd. was duly appointed as the lead consultant while Coniston Ltd. was the main contractor for the work.Having worked with GEC Anderson on previous projects such as The Old Deanery in the City of London, Caroe Architecture was confident in seeking the company’s advice on the possibilities for the refit in the very confined space of the barrel-vaulted crypt. GEC responded by conducting a detailed site survey, followed by a ‘templating’, supply and installation contract.  The Project Architect, Alanah Honey, commented: “Not only was the existing, domestic scale kitchen beneath the French Protestant Church not meeting its full needs, but the failure of the old waterproofing measures required the walls to be taken right back to bare brickwork for repair.From previously just providing tea and coffee, the client wanted to move to more of a commercial scale installation, but unfortunately there wasn’t the space or the extract capacity for a full commercial facility, we therefore went for the highest specification we could, calling on the services of GEC Anderson on the basis of our past experience of working with the company.”  “The fit-out has gone very well with GEC installing all of its stainless steel drawer units, shelves and work-surfaces as well as providing a detailed specification for the church to purchase all the appliances direct, to help keep within budget. We are delighted to have been appointed to York Minster this year, having been nominated as Inspecting Architects to a number of other Cathedrals and major churches over the last 10 years. So our work is expanding significantly beyond London and Cambridge – also involving National Trust properties as well as the Oxbridge Colleges – so there is the likelihood for further cooperation with GEC.”   Benedicte Fougier, the President of the Consistory stated, “On the advice of our architects, Caroe Architecture Ltd., we contracted GEC Anderson to design and build a kitchen in our quirky, grade 2* historical building which was no small feat given the many architectural constraints. GEC Anderson has been terrific, coming up with creative ideas and delivering exactly what we needed and more. They have been extremely professional and personable throughout, very engaged with us through constant communication and adjusting their design until the last minute to take into account our needs”. Since its formation in 1962, GEC Anderson has built its reputation for the supply of top end stainless steel sinks and sanitaryware on a combination of innovative design, top quality materials and expert craftsmanship. In addition to the company’s Decimetric system of cabinets, sinks, drainers and other equipment - widely specified for sectors including health and catering - the company’s custom engineered solutions have been selected for some of the country’s top sports, entertainment and leisure destinations. 

Refurbishment of a campsite services facility at a popular country park provided an unusual testing ground for part of a new stainless steel kitchen furniture range developed for the professional catering sector. But after a full season’s camping at Emberton Country Park, the double bowl sinktop from GEC Anderson’s new Decimetric® range has met all expectations and is set for a long service life.Emberton Country Park, near Milton Keynes, was developed from disused gravel workings and is today an attractive parkland setting of 200 acres. It caters for a variety of uses and includes 58 pitches for tents and touring caravans, rally fields, lake and river fishing, a conservation area, children’s play areas, a shop and washroom/toilet facilities.As part of a major refurbishment of the services block for campers in the touring field, Milton Keynes Council’s Construction Services Department refitted the washroom where campers wash their crockery and cooking utensils. After another supplier was unable to deliver a suitable sinktop within the council’s timeframe, Robert Gritton, Project Manager for Milton Keynes Council, shopped around for a cost effective alternative – and became one of the first customers to order from the Decimetric® range. “GEC Anderson was able to custom make the sinktop in a very short time, and everyone has been very pleased with it. I’m very glad that the other make was not available,” he says. “The other big advantage of the Decimetric® product is that its 100mm modular size increments permit specification of the largest possible unit to fit a space, without the premium of a true bespoke installation.”The Decimetric® sinktop is extremely durable, but requires minimal maintenance. Park Manager David MacCarter says: “It’s really solid, well made and it will never wear out. The cleaners just give it a wipe over every day: it’s easy to keep clean and it looks great.”The 1,700 x 600mm sinktop of commercial grade stainless steel has a water-retaining 40mm lipped edge at the front and sides, and an 85mm sloping upstand at the back. The bowls are 400 x 400 x 250mm and positioned 100mm apart, centrally along the length of the sinktop. Both have 38mm outlets and two 30mm diameter tapholes at 200mm centres behind each bowl. The sinktop stands on square section stainless steel legs with adjustable feet. A solid stainless steel shelf is fitted under the sinktop. The new Decimetric® range from GEC Anderson offers a flexible and comprehensive selection of sinks, surfaces, support frames, cabinets and shelving. The range was developed mainly for the professional catering market, but its versatility, good looks and low maintenance requirements make it an excellent choice for applications requiring hard-wearing and hygienic surfaces. Decimetric® units are easy to specify and are offered in sizes from 500-3,000mm, with 100mm sizing increments (100mm = 1 decimetre). The modular approach makes for economy and short delivery times. Founded in England in 1962, GEC Anderson has pioneered the development of made-to-measure stainless steel products. Today, the company’s range includes bowls, worktops, cabinets, shelving and sanitaryware for use in domestic, commercial and specialist environments. All products are manufactured to ISO 9001 and backed by a comprehensive support service from planning and product specification to installation and maintenance.

C-TEC’s revolutionary new evacuation alert system, EVAC-ALERT, has been specified for a new purpose-built residential building in London.Located in the Elephant and Castle area of the London Borough of Southwark, Joyce Newman House is an 8-storey block of 40 spacious living spaces commissioned by Leathermarket JMB, Southwark’s largest resident-managed housing organisation. The affordable-housing development also features landscaped gardens, an interactive playground and a communal kitchen garden for residents to grow their own vegetables.Specified and supplied by Churches Fire & Security working alongside Blu Electrical Installations Ltd, C-TEC’s EVAC-ALERT has been designed to comply with the new BS 8629, which recommends evacuation alert systems be installed in all new blocks of flats over 18 metres to assist the Fire and Rescue Service (FRS) in evacuating part or all of a building in an emergency.The system consists of a 2-loop control panel connected to a host of single and multi-way interface units, self-testing sounders and visual indicators. Simple and intuitive with manual controls to allow firefighters to easily operate the evacuation alert devices located inside flats on a zone by zone or floor by floor basis, the panel is stored in a secure vandal resistant cabinet which can only be accessed by the FRS using a special copy-protected key.David Collins, Project Manager at Churches Fire & Security, said: “Evacuation alert systems ensure firefighters can alert occupants in a building of the need to evacuate if a fire gets out of control. The EVAC-ALERT system we’ve specified provides peace of mind for residents and, crucially, also demonstrates that building management have taken every precaution possible to protect the people residing in the property. Our client is delighted with the system.”Certified to all relevant EN54 product standards, EVAC-ALERT is powered by C-TEC’s CAST protocol and fully compatible with ENVISION, its powerful new cloud-based remote access data management software which can be used to provide duty holders with a verifiable audit trail of system activity and device testing.

We met digital content creator and charity ambassador Sally, in her gorgeous detached house in the English countryside in Surrey. Sally, her husband Gav, their three sons, dog and cat live in a beautiful cottage with lots of outdoor space for football, dens and four chickens (all named Barbara). They’re an active, outdoorsy family who love embracing nature, from scuba diving to surfing Cornwall’s finest beaches.Over the years they have built two extensions to their house. In the most recent extension project, Sally chose to illuminate the end of her gorgeous country kitchen/diner with a Vario by VELUX bespoke rectangular rooflight, so we went to visit her for a cuppa and a lovely chat about her impressions and experience on the importance of daylight. Sally, what a bright and stunning space you have in here. Could you please tell us more about your extension project?"We love this house; it has plenty of space and we absolutely love the country lifestyle. We bought a house 12 years ago and that time it was much smaller. The first big extension we did was 9 years ago, but we didn't quite get what we wanted as the building restrictions at the time were very strict.The key thing for us was to bring the light in. A wall of glass made perfect sense, but as the extension has a flat roof, we also started to think about what was above. In a room like this, I think the roof should be seen as the fifth wall.”Your original plan was to put a glass lantern in the extension. What made you change your mind and choose a flat glass rooflight instead?“Initially we thought we would put a glass lantern in like everybody else and it didn’t even occur to me that I could have anything else until I was invited to a rooflight launch event by Vario by VELUX. At the event, I completely fell in love with the idea of having a rooflight in my house. I got all the information and, after I realised that even a modern flat rooflight comes with an upstand and you also get the height of the roof built in, which would also give the room the height we wanted, and that the cost would be less than having a lantern of the same size and with no breaks in the glass, choosing a flat glass rooflight was a no-brainer! What do you love most about owning a bespoke rooflight?“It’s so cool and yet functional. Rooflights brings so much more light in than you would get from a normal side window and the fact is that daylight does make you feel better, especially in winter. On top of that, the customer service was excellent, there is always a backup call from Vario by VELUX to make sure you are ordering the right window, they hold your hand through the whole thing and the whole process of designing and ordering was made fun and easy. They helped me with things like setting the window at a slight angle, so the rain just runs off and we don’t end up with a swimming pool situation on the roof! It’s a really hands on, personal service from a small team, but backed by a big name like VELUX so you know you can really trust them. It’s like the gold standard of roof windows.”How did you perceive the installation process of the rooflight?“The process was really simple, easy and quick. Our constructor was provided with all the information they needed to know, in order to put the rooflight in. Our bespoke rooflight was delivered in 6 weeks and we rented a small crane for a day to lift it in. The crane was literally tiny, it fitted through our side gate. Then it was simply a matter of dropping it into the opening and letting the builders do their thing to seal it in. I have to admit, I was a bit nervous on the installation day as the dog insisted on sitting under the opening and it was very windy, but it all went very well. That moment when the hardboard comes off and you get your first glimpse of the sky above, it’s just magic.”Do you think changing your house has improved your everyday life?“Extending the house, and how we use it, has changed the way we live, the way we work and the way we relax. Having an extension, an extra room, the flow and the light we wanted has definitely increased the value of the house but also the saleability of the house. How many older properties have flat roof extensions and haven’t put in a rooflight? There must be loads and they’re definitely missing a trick. We wanted to build personality and I believe that with the extension and bespoke rooflight we got exactly what we wanted. With more daylight and space, I feel more active, I feel more awake, I feel fresher, I get things done. It has definitely changed the way we live.”

GEC Anderson’s stainless steel worktops, sinktops, doors and splashbacks have been chosen for the modern Café Bar at The Hepworth Wakefield art gallery in West Yorkshire, for their contemporary and accurate appearance as well as their hygienic qualities associated with food service. The stunning building is formed of ten different sized trapezoidal blocks constructed using pigmented, self-compacting concrete and recently listed in The Times ‘Top 50 Galleries in the World’. The continuous stainless steel worktop installed behind the main serving counter of the Café Bar incorporates sinks, plinth, cupboards doors and splashbacks, all in brushed satin stainless steel.

An old Victorian Rectory, in need of a makeover; This family home was oozing character and charm but was not ideal for modern-day living. Our clients came to us in desperate need of more living space and a brighter, more cheery environment to raise their two children.