"insulation"

High performing acoustic underlay was selectedfor use below a 20mm engineered wood flooras part of a flooring refurbishment project in aprivate home. The SS400 was loose laid to the subfloor with the 20mmengineered wood flooring floated above. The tongue andgroove joints were bonded with PVA adhesive.Other points to include:• SS400 manufactured using recycled rubber crumb, so extremely environmentally friendly.• Durable - provides long lasting performance and will not deteriorate or collapse over time.• SS400 is a high performing acoustic underlay, ideally suited for use with wood flooring and laminates, providing excellent impact performance in excess of the UK buildingregulations.• Hygienic – naturally antimicrobial, anti-allergy and resistant to decay with low VOCs.Benefits of Soundsure 400• Exceeds the performance standards required in the UK Building Regulations for sound insulation• Suitable for use with underfloor heating systems• Manufactured using recycled materials and fully recyclable• Recycled rubber crumb ensures long-lasting acoustic performance• Cushioned underlay to provide underfoot comfort• Rubber crumb provides superb stability, performance and durability• Will not deteriorate or collapse over time.• Reduces subfloor preparation times as screed or smoothing compounds are not required• Green Label Plus accredited

The fact that power stations produce high levels of noise won’t come as much of a surprise to anyone who has spent more than a few minutes inside one. Quite how dangerous these levels of noise can be, however, might.How Loud is ‘Too Loud’?To give you an idea of the sensitivity of the human ear, the average person can hear sounds down to about 0 decibels (dB), the equivalent of a whisper or rustling leaves, and people with exceptional hearing can detect sounds as low as -15dB.It is at the other end of the scale, however, that serious problems can occur. At around 85dB, you are likely to experience discomfort. As little as eight hours of continuous exposure to this level of noise can result in permanent damage to the inner ear, which is why 85dB is the maximum allowed under the Noise at Work Regulations. At 100dB, just fifteen minutes of exposure can cause permanent damage. And at 110dB the exposure time drops to around a minute before harm is inflicted. Pain is experienced at 125dB and hearing loss can be permanent. At 140dB or above not only is the damage permanent, it is also immediate.The Noise at Work Regulations stipulate that an ‘employer shall ensure that risk from the exposure to noise is either eliminated at source or, where this is not reasonably practicable, reduced to as low a level as is reasonably practicable.” And that “if any employee is likely to be exposed to noise at or above an upper exposure action value, the employer shall reduce exposure to as low a level as is reasonably practicable by establishing and implementing a programme of organisational and technical measures, excluding the provision of personal hearing protectors, which is appropriate to the activity.” In other words, an employer is expected to do everything they can, within reason, to protect their employees from the harmful effects of noise. And, no, it isn’t enough to simply supply a pair of ear-defenders.Noise-Induced Hearing LossThe damage caused by these dangerous levels of noise is referred to as Noise-Induced Hearing Loss or NIHL. NIHL can be caused by a single exposure to a very loud sound or by repeated exposure to even relatively low levels of noise over a long time span. In fact, according to research carried out by Xiaoming Zhou from the East China Normal University in Shanghai, even seemingly innocuous sounds, such as the whirr of a desk fan, can cause damage if exposure is consistent and long-term.To understand how NIHL occurs, it’s necessary to understand how hearing works.The generally accepted view is that sound waves strike the eardrum and these vibrations are translated into coherent information by the brain. It is slightly more complex than that. Sound waves do, indeed, strike the eardrum, causing the eardrum to vibrate. These vibrations are then transmitted through the ossicles (the small bones of the middle ear) to the cochlea, a spiral-shaped chamber filled with fluid and lined with tiny hair cells called stereocilia. The vibrations cause the fluid to move which, in turn, causes the stereocilia to move. The stereocilia’s movements generate neural signals with are picked up by the auditory nerve which ‘forwards’ these signals onto the brain where they are interpreted as intelligible sounds human speech, music, the beep of car horn etc.Exposure to the harmful levels of noise mentioned above can damage the stereocilia, breaking them or flattening them so they no longer vibrate as effectively or so they no longer vibrate at all. The result: impaired hearing or, in extreme cases, total hearing loss.The noise recorded coming from the dry cooling system at the Severn Power CCGT Power Station at Uskmouth B was between 130dB(A) and 135dB(A), a full 50dB above Noise at Work Regulations’ acceptable levels. Regarding dB(A), the human ear does not hear all frequencies with the same intensity. It is most sensitive to sounds in the 500Hz-8kHz range. Above and below this range the ear becomes progressively less sensitive. To compensate for this, sound level meters incorporate electronic filtering to correspond to the varying sensitivities of the ear. This filtering is called A-weighting and readings obtained with this weighting are referred to as A-weighted and signified as dB(A).The Wrong Kind of NoiseAlthough it was identified that the dry cooling system from SPX Cooling Technologies was generating these dangerous and unacceptable levels of noise, it wasn’t the cooling system that was creating the noise. In fact, it was the turbines that were the source of the noise. The steam roaring from the turbines at incredibly high speeds enters the main 5.5m steam ducts, passes up five risers and is channeled into the steam distribution manifolds. Not only does the steam enter the dry cooling system, the accompanying noise does, too. You might think that the 8mm thick steel from which the ducts are constructed would go some way to containing the din. Unfortunately, steel is extremely adept at transmitting noise and is, in many respects, the acoustician’s worst enemy.To make matters worse, when acoustics and soundproofing specialists, CMS Danskin Acoustics, were brought in by SPX and Uskmouth’s main contractors, Siemens, they discovered not only high levels of noise but also that the noise generated had a very low-frequency bias. Low-frequency noise is the most difficult to treat from a soundproofing perspective due to the excessive length of the wave cycle. This is one of the reasons people in apartments, terraced houses and semi-detached homes will often complain of the problems of bass noises intruding from neighbouring properties, as the walls and floors filter out the higher frequencies whilst the lower frequencies manage to penetrate. This can seem a little counterintuitive, as we imagine higher frequency noise to be more piercing. Their short wave-cycle, however, means they can be blocked out with relatively thin soundproofing materials.The low-frequency nature of the noise also meant that this wasn’t just a Noise at Work Regulations problem. Low-frequency noise can be particularly problematic to the population in the vicinity of the source of that noise. Low frequency noise is often not even ‘heard’ in the traditional sense. Complainants often won’t even realise that noise is the problem at all; instead they will describe ‘pressure sensations’ and ‘physical discomfort’, experiencing the incursion as vibrations. Areas of the human body can resonate when exposed to low frequencies. The chest, for example, can resonate at frequencies between 50Hz and 100Hz, and the head at frequencies between 20Hz and 30Hz. It isn’t unusual, therefore, for sufferers of low frequency noise to complain of anxiety, nausea and headaches. Often, they won’t even be aware of the root cause of their symptoms, instead attributing them to a virus or some mystery illness.A New Approach and a Sound SolutionSolutions for low-frequency noise issues typically involve wrapping the problem in significant quantities of acoustic insulation, with many standard solutions being as deep as 500mm to 700mm. The sheer volume of lagging required for an insulation-based approach to a project like Uskmouth, with a daunting 8,000m2 of ducting to be covered, would be expensive, time-consuming to install and prohibitively disruptive. What’s more, there were areas around the ducting at Uskmouth which simply wouldn’t have been able to accommodate such an excessive construction height of soundproofing material.Paul Absolon, CMS Danskin Acoustics’ Technical Director, responded to the challenge of creating a ‘thinner’ soundproofing system that would meet the necessary Noise at Work Regulations requirements but would be cost-effective and efficient to install. In order to minimise disruption to Uskmouth, an off-site simulation was created near Burton on Trent, using a large section of identical ducting with a ‘door’ sealing up either end. Within the duct were several very powerful speakers. For testing, highly sensitive microphones were placed in strategic positions along the outside of the duct to measure any ‘leakage’. Acoustic insulation solutions were conceived, implemented and assessed in this controlled environment with the assistance of Acoustic Consultants Muller-BBM and the installation company Western Thermal Insulations.Exploring a wide range of acoustic materials from CMS Danskin Acoustics’ industrial acoustics range, it was clear that a single product was not going to be able to solve the problem on its own, so Paul opted for a combination of products working in concert, layer upon layer.The first layer consisted of CMS HT1B elastomeric isolation pads, constructed from a polyurethane-bound rubber granulate specifically formulated to dampen and/or isolate noise and vibrations at source and independently tested by the Institute of Structural Dynamics at the Technical University of Dresden. The 50mm thick pads were bonded to the surface of the duct at a rate of nine per square meter, creating 300mm spacings; so, as well as the dampening effects of the material itself, the construction benefited from large, evenly distributed airspaces in its foundations. Sound waves move less effectively through dead air.The second layer consisted of 50mm-thick QuietSlab SVX3, a high-performance, mineral-fibre acoustic lagging. MIMA (the Mineral Wool Insulation Manufacturers Association) describe the acoustic insulation properties of mineral wool (and mineral fibres more generally): “Porous materials such as mineral wool work to control and reduce noise by allowing air movement into the fabric of the material. The fluctuations of air molecules – which form sound waves – move into the body of the mineral wool, where friction between the air particles and the material’s narrow airways cause sound energy to be dissipated as heat.”

The architect has created a connection with the outdoors in, utilising large fixed rooflights from Glazing Vision to bring daylight into the house and frame the surroundings.‘The most beautiful spot in the Netherlands’; that is the description of this country house in the marina ‘t Raboes according to the owners. Located on the Eemmeer, a place in the middle of nature, and away from the hustle and bustle of city life. The architect has created a connection with the outdoors in, utilising large fixed skylights from Glazing Vision to bring daylight into the house and frame the surroundings.Bringing in daylight with large minimalist skylights was a key requirement for the architect. The horizontal application of large glass surfaces demands a lot from the design and after many discussions, the architect was confident that Glazing Vision was the rooflight manufacturer that could implement what they had in mind.No framework in sight. Insulated glass with excellent insulation values. Glass that blends seamlessly into the architect’s design. A way to bring the outdoor feeling inside.Three multipart skylights have made this architectural vision become a reality.The back-to-back angles fit in very well with the rest of the modern contemporary interiors. To make it possible to darken the rooms, Glazing Vision has applied custom-made sun protection from Topshade.At the spot where the river Eem flows into the Eemmeer, architect De Kort van Schaik designed the country residence ‘t Raboes. The clients wanted to create a place where they could fully experience nature, but also withdraw from the hustle and bustle of the city.The house consists of three parts, connected by three covered terraces. Concrete walls and floors which blend seamlessly into the environment and large windows that frame the polder landscape.All energy on ‘t Raboes is generated locally. The solar cells on the roof of the marina building supply electricity. A heat pump that uses the surface water of the Eemmeer provides heating for the house and swimming pool.In the living areas, wood stoves have been used, all which use wood from their own grounds, providing readily available extra heating capacity.A beautiful contrast is created by the yellow epoxy bathroom furniture, designed by Sabine Marcelis. A piece of furniture consisting of a bath, wash bath and shower stands as a free-standing sculpture in the concrete bathroom. The skylight forms a completely frameless glass roof, which gives you the feeling of being outside even more.Sabine Marcelis states that she has designed her dream bathroom. The subtle rotation of the furniture gives you a fantastic view of the landscape from the bath.Taken aback by this stunning property, the architectural press has been impressed with all aspects of the design. De Volkskrant gives the Huis op ‘t Raboes five stars. “The Rotterdam architectural firm De Kort Van Schaik designed a house in which you live with the elements and at the same time are protected against them, thanks to a thick concrete coat.”

Benenden Hospital is a state-of-the-art private hospital in Cranbrook, Kent specialising in a wide range of discretionary healthcare and well-being services to individual and business healthcare members.• The original hospital opened in 1907 by National Association for the Establishment and Maintenance of Sanatoria - to treat postal workers suffering from tuberculosis. By 1951 the Association had disbandedand the Benenden Healthcare Society took over the sanatorium, dramatically expanding the services available.• Architects C A Vaughan Blundell were appointed to design a new atrium and welcoming area to enhance the patient and visitor experience.• The £55m project attained a Breeam status of ‘Good’.The SchemeThe scheme, designed by architects C A Vaughan Blundell with assistance from SR Architects Ltd, has created a wonderfully light and airy entrance atrium designed to welcome and create an enhanced patient and visitor experience with maximised natural daylight. The extensive breakout and catering facilities support theatres, en-suite rooms, outpatient department and ophthalmic suite along with diagnostic imaging, rest and recovery areas. The main contractor was Willmott Dixon Construction.The AdvantagesThe skylights have a unique ability to bathe interior spaces with diffused and glare-free daylight, which creates a stimulating and healthy environment. In addition, their heavily insulated composition eliminates glare and hotspots, thereby reducing the load on temperature control systems and the need for artificial lighting.They provide additional light in the large atrium projecting it deep into the interior. They were specified complete with highly insulating Nanogel which achieves an impress U value of 0.28W/m2K, helping the project attain a Breeam status of ‘Good’. This is particularly impressive given the amount of curtain walling and clerestory glazing involved in the scheme.Kalwall skylights can be manufactured to large spans up to six metres. The aluminium or thermally-broken grid core with interlocking I-beams gives Kalwall incredible strength. The lightweight system reduces the need for supporting structures while offering the highest protection in terms of wind-borne debris and resistance to impact, abrasion and point loads. The exterior face is colour stable and includes a UV resistant, self-cleaning surface. This means that normal  rainfall helps to keep the surface free of dust and dirt while at the same time retaining its original colour during the weathering process. Furthermore, the inclusion of an erosion-prevention barrier protects the interior from weather exposure and the risk of fibre-bloom, cracking and crazing.The CommentsGeoff Holden, Senior Technician at C A Vaughan Blundell comments, “The use of Kalwall represented the best value balance of energy saving and cost and provided us with the ideal way to achieve spatial daylighting within the requirements of Part L”Jane Abbott, Hospital Director, “We want to ensure our patients have an excellent, efficient and streamlined experience from the moment they arrive until the time they leave.”

Chelmsley Wood Shopping CentreBauderflex bituminous waterproofing systemSynopsisChelmsley Wood Shopping Centre, located in East Birmingham, was experiencing leaks with their current flat roof waterproofing system and so they needed a quick, high quality solution to remedy the situation. Although competitors had suggested the only option was to strip the roof, Bauder found a more cost-effective answer by using our in house Troxler Moisture Gauge to identify any areas of wet roof construction, removing the saturated areas and then overlaying the whole roof area.Bauder Building BoardProject:Chelmsley Wood Shopping Centre Location:BirminghamProject Type:RefurbishmentRoof Area:4500m²Specifier:Black Cat ConsultancyApproved Contractor:BBR Roofing LtdProject challengesThe works were to be undertaken in the middle of winter on the existing single ply covering which kept freezing when the operatives were drying the surface. Fixing down of the insulation boards (to the existing waterproof covering) was a noisy operation which also exposed the retail tenant below to risk of water ingress. Work had to be undertaken on a roof where ridges and valleys had to be navigated whilst managing the waterflow.The specification allowed for the removal and replacement of the saturated areas as identified by our moisture mapping survey. This operation had to be planned to ensure that the retail stores were not put at risk in terms of water ingress, but still managed to keep the works progressing to schedule. This was particularly difficult due to the exposed site and the inclement weather encountered. The resultAs a result, Large sections of cable bespoke design had to be developed with Bauder to overcome these challenging site details without the need to decant the retail tenants below. trays and handrails had to be lifted in situ so the roof works could be completed without compromising electrical or mechanical install.By working closely with the centre, a method of work was developed which fulfilled these criteria in terms of waterproofing, health and safety and business protection of the shopping centre. System installedBauderflex bituminous waterproofing system1 BauderFLEX K4EA torch applied SBS elastomeric bitumen capping sheet, featuring spunbond polyester reinforcement to allow the finished product to cope with structural movement without fracture.2 BauderTEC Sprint DUOA self-adhesive elastomeric bitumen underlayer with DUO lap technology. This product has a glass fleece reinforcement feature for stability and strength.3 BauderPIR FA-TEFlatboard insulation boards containing rigid polyisocyanurate (PIR).4 BauderTHERM DS 1 DUOA self-adhesive SBS elastomeric bitumen air and vapour control layer (AVCL) with patented “DUO” lap technology to ensure thorough sealing of lap joints, even in lower temperatures.

The Tottenham Experience is the largest club shop in Europe, and the facility houses both the Tottenham Hotspurs & their NFL Partners a unique shopping experience. The Tottenham Experience houses an entertainment suite on the top floor which replicates the stadium terracing. The complexity of detailing around the balustrading and steps was overcome by using the internal and external Proteus Technical Team.Proteus Hot Melt® and Proteus Pro-Therm XPS Plus offered the perfect solution.High Performance WaterproofingWith the podium deck covering 1500m2, the Proteus Hot Melt® system combined with Proteus Pro Therm Insulation XPS Plus was the optimum waterproofing solution for this project with a cost effective, seamless and fast application.This High performance solution worked exceptionally well for our Proteus Approved Contractor, who was able to install the system without any complications to the highest standard.Quality controlProteus Waterproofing worked in close partnership with both the Architect, Main Contractor and Proteus Approved Contractor, to successfully deliver the project to a very high standard within the required time frame and to the standard required.Long term performanceProteus Hot Melt® is a long lasting robust membrane design to last. The client required both a BBA Certified product that offered a 25 year Guarantee for the waterproofing system on this project.

Ilona Rose House with its unusual rose-coloured 3D printed façade is a new-build, mixed-use project spread over 13 floors, including a 4 storey, basement with a quarter natural light. It has transformed the former site of the famous Foyles bookshop on Charing Cross Road, boasting outstanding new shops and restaurants, along with new pedestrian walkways, public realm and roof terraces.The unique building has been designed by MATT Architecture for main contractors Sir Robert McAlpine and offers 150,000 sq ft of office space, 20,000 sq ft of retail fronting on Charing Cross Road and a brand-new public courtyard with 15,000 sq ft of restaurant and bar space.The upper floors comprising of offices exploit the stepped massing of the building to create over 12,000 sq ft of planted external terraces for the benefit of the occupiers and to enhance the environment.The south-west facing terraces, nicknamed ‘the hanging gardens of Soho’ will provide external amenity space for every single level of office. It is here that Radmat’s waterproofing and insulation products were chosen for their tried and trusted properties. PermaQuik Hot Melt Bitumen Waterproofing System was used on 95% of the roof areas, multiple roof terraces, Greek Street Tunnel and James’ Courtyard.

Celebrating its 150th anniversary in 2019, St. George’s Weybridge – a Roman Catholic private day school in Surrey – marked the occasion with the introduction of an exciting new architectural development.Transforming its existing, functionally simple sports hall into an inspiring, beautifully designed facility, the College’s accommodation brief comprised a premiership level hockey pitch and six-court sports hall, as well as a strength and conditioning suite, dance studio and flexible multi-use areas for group activities, meetings, presentations, exhibitions, open days and ‘match teas’.Designed by global architectural practice Scott Brownrigg, the architect’s vision was to create a contemporary and timeless building that would inspire students to achieve their very best.With plans including a stunning tree canopy-like roof structure draping over the internal spaces, the roof needed to achieve 30m clear spans across the main hall and the design needed to be clever and sensitive to the fact that the site’s location sits within the green belt. It also required a flexible and durable waterproofing solution to ensure the building leaves a lasting legacy for future generations of Georgians.Roofing:SARNAFIL G410-ELF lead grey.SARNAVAP 5000.120 M SARNATHERM G insulation board.SIKA SOLARMOUNT-1.

A £40 million investment, 13 roof areas, eight different roof levels, and a steady stream of visiting students to keep happy throughout – the University of Reading (UoR) Library’s complete refurbishment was a large and challenging project spanning three years.Originally opened in 1964 and later extended in 1985, the library’s internal and external revamp was designed to increase space, improve facilities for individual study, provide better access and security across the building, and improve energy efficiency.In addition to a new-build Café extension, a new entrance canopy, a new ground-to-roof level lift and stair core extension – each featuring a new flat roof area – there were also 10 existing flat roof areas refurbished, coupled with the replacement of windows and re-cladding of the building’s exterior.Following a competitive tender based on an outline specification, Owlsworth Roofing, Sika Sarnafil single ply flat roofing specialists, impressed with the level of detail included in their quote and were awarded the contract by main contractor ISG.Roofing:Sika® Sarnafil G410-12 ELF.Sika® Sarnafi G410-12 EL.Sarnavap®-5000E SA.Sarnavap® HD SA.Primer 600.Sikatherm® PIR Insulation and Sarnacol®-2162.

Welcome to 120 Moorgate, a grade A office in the City of London. 3,000m2 of AGC ipasol Neutral 70/37 solar control double-glazing units and matching spandrel glazing was chosen for the facade of this extensive refurbishment project completed in 2020.In order to meet the demands of today's contemporary workspaces, a new facade was needed in order to improve the energy and acoustic comfort for occupants. With seven floors of full-height glazing, the ipasol Neutral 70/37 double glazing specification allows for the highest level of daylight and connection with the outside environment whilst protecting against overheating thanks to its solar gain reduction properties (g-value of 0.37). The fastest growing use of energy in buildings is for cooling, so harnessing existing technologies such as solar control glass can contribute to a sustainable building strategy.A low U-value of 1.0W/m².K was also a given, in view of the facade's thermal insulation requirements. Laminated glass was also incorporated in the specification of the double-glazing units as an acoustic enhancement to help protect against nuisance noise and also as a safety measure since the full-height glazing is accessible from interior spaces.Design work by Darling Associates and installation undertaken by specialist facade contractor Anglian Architectural.120 Moorgate is rated BREEAM Very Good.

This project for Durham Lane Primary School saw the refurbishment of their existing roof. The previous bitumen waterproofing was showing signs of wear. Isolated areas of leaks had started to form, which was presenting classroom disruption.ChallengesFor funding purposes, the roof area was inspected and separated into two phases. Phase 1 of the roofing works presented a number of potential fire risks with combustible substrates and penetrations. The existing make-up performed poorly when tested against current building regulations.SolutionsFollowing minor remedial works, the existing waterproofing system was inspected and deemed suitable for use as the air and vapour control layer. Thermal and acoustic upgrades were introduced through the installation of Hytherm MW mineral wool insulation, ensuring building regulation compliance and an acoustically sound teaching environment in compliance with BB93.To complete the installation, Hyranger reinforced bitumen waterproofing system was installed, achieving a 20 year insured guaranteecovering waterproofing system materials supplied by Axter. In accordance with the NFRC’s Safe2Torch guidance, cold applied liquid waterproofing was required for detailing to fire risk areas; in this instance, Starcoat R was the system of choice due to uniform aesthetical finish and cost efficiency.Systems in useHyranger®Starcoat® R

Architects: Woods BagotLocation: Wiltshire, UKPhotography: Will PryceMaterial: NATURSOFFIT-W CladdingFinish: RustikThe project by the Woods Bagot architecture studio for the library at St. Mary’s Calne School re-centres the space as the hub of academic and social activity. Completed in 2020 and located in the British county of Wiltshire, the project maintains the school’s traditional aesthetic, all while incorporating a central garden with apple trees.The library’s faceted ceiling is a central part of the design, which evokes spreading tree branches. All of the wood panels are held up by an iron truss structure connected to large pillars, simulating the vertical nature of trunks. The properties of Parklex Prodema’s false ceiling allow continuity for the wood from the interior to the exterior, making it visible through the clerestory windows.The triangular panels that make up the complex faceted geometry are resistant, long-lasting, sustainable, and maintenance-free. They were custom manufactured for this project, including perforations for acoustic purposes, allowing sound to pass through the panel to be absorbed by the insulation behind it.The natural Okume wood panel selected by the architects provides a warm, welcoming atmosphere, creating a point of inspiration for learning. Combined with the garden landscape around it, the continuous ceiling magnifies the building’s appeal and integrates it into his surroundings.

Sto’s specialist façade solutions have ensured a new affordable housing development seamlessly integrates with its surroundings. Located in West Kensington on the Springvale Estate, ‘Tavener Court’ comprises eight one and two-bedroom flats as well as two three-bedroom houses, spread across three floors.Externally, the scheme features the StoTherm Mineral external wall insulation system, which has been finished with StoSilco silicone render in a pale shade of yellow, and a variety of StoDeco three-dimensional profiles to add architectural detailing across the building. With 1,000 colours to choose from in the StoColor system, the Sto render offered extensive design flexibility for architecture and design company, NORR. It has also provided a high level of water repellence and water vapour permeability, making the façade resistant to the build-up of dirt and reducing the growth of algae and fungus. The StoDeco profiles were specified to create window surrounds in pure white, corner detailing around the roof area, and a decorative band course across the façade. Manufactured from Verolith, which comprises 90 per cent perlite, the StoDeco profiles are highly resistant to weather and other environmental factors. Light in weight and easy to work with on site, the products are quick to install and form a durable bond with the render. 

Efficient Approach Dramatically Reduces Turbine Noise at CCGT Power StationsTen years after it was first used at Uskmouth, this innovative approach to soundproofing that reduces insulation depth by up to 76%, is once again commissioned in France.Dangerous Levels of NoiseModern dry cooling systems offer many benefits over traditional systems in CCGT power stations, but they have the disadvantage of being a complex source of noise transmission. The turbine noise recorded coming from the dry cooling system at the Severn Power CCGT Power Station at Uskmouth was between 130dB(A) and 135dB(A). Exposure to these levels of noise, a full 50dB above The Control of Noise at Work Regulations 2005 “upper action level”, will cause both immediate and permanent damage.When acoustics and soundproofing specialist, CMS Danskin Acoustics, were brought in by SPX Cooling Technologies, designers of Uskmouth’s dry cooling system, they discovered not only high levels of noise but also that the noise generated had a very low-frequency bias, the most difficult noise spectrum to treat.Solutions for low-frequency noise issues typically involve wrapping the problem in significant quantities of acoustic insulation, with many standard solutions being as deep as 500mm to 700mm. The sheer volume of lagging required for an insulation-based approach to a project like Uskmouth, with 8,000m2 of ducting to be covered, would be expensive, time-consuming to install and prohibitively disruptive.The New Approach proven at UskmouthThe challenge of producing a soundproofing system that would be cost effective and efficient to install was taken up by CMS Danskin Acoustic’s Technical Direct Paul Absolon. CMS Danskin has a reputation for effective, high quality acoustic solutions tailored to the specific challenge, and this solution was no different.Exploring the wide range of acoustic materials from the company’s industrial acoustics range, Paul opted for a combination of materials working in concert: the unique CMS HTIB elastomeric isolation pads, constructed from a polyurethane-bound rubber granulate with excellent dampening and isolation characteristics; QuietSlab SVX3, a high-performance, mineral- fibre acoustic lagging; and WBKT Acoustic Barriers, a high-density, barium-sulphate-loaded thermoplastic polymer, which is thin, flexible and easy to work with.By using a bespoke combination of materials which each tackled specific aspects of the problem, CMS Danskin Acoustics were able to create a soundproofing solution with a construction depth of just 170mm, between 66% and 76% thinner than the 500-700mm standard solution. Disruption was minimised and material costs reduced.Once complete, the system was rigorously tested by SPX Cooling Technologies and Uskmouth’s main contractor, Siemen’s Energy. CMS Danskin Acoustics’ solution had reduced the noise generated by 39%, to just 82-83dB(A), under the 85dB “upper action level” listed in The Control of Noise at Work Regulations 2005.Peter Ullrich, project director, Siemens Energy, commented at the time:“Effectively controlling noise and reducing sound emissions was a top priority for us in the Uskmouth project. Not only was it essential that the dry cooling system satisfied all the legal acoustic obligations and regulations but just as important was that neighbouring properties were not disturbed by additional noise levels.”Repeat Success at LandivisiauTen years on, the same successful approach has been applied to the dry cooling system at the new CCGT Power Station at Landivisiau in Brittany, north-western France. Also built by Siemens, the dry cooling system was supplied by SPG Dry Cooling. In the case of Landivisiau, even greater sound reduction was required, from approximately 140dB(A) to below The Control of Noise at Work Regulations limit of 85dB(A).To meet this challenge, SPG and CMS Danskin collaborated on extensive testing at the acoustic testing laboratory of SRL Technical Services. The reductions achieved during testing as part of the specification process were some of the largest reductions in sound ever measured at SRL.Once the specification was confirmed, CMS Danskin worked with SPG to ensure that materials for the multi-layer acoustic solution were prepared and delivered efficiently so that SPG’s installers always had the correct materials on site. The installation of the acoustic soundproofing was completed in October 2021 and the power station entered commission as planned in April 2022.“CMS Danskin Acoustics Limited successfully supplied the acoustic material package for the project which was tested at SRL to give an overall lab test reduction of 68dB Rw.”Robert Hill, Project Manager, SPG Dry Cooling

This Edwardian home was transformed inside and out in 2021. Part of the renovation included changing the original single glazed, draughty timber sash windows. The sashes were previously painted shut to minimise heat loss, but this was proving both inconvenient and ineffective. The homeowners wanted to find replacement windows that were indistinguishable from their original timbers but in a low maintenance form that offered significantly better security and thermal efficiency. Having spent months looking around for the right solution, the homeowners found Roseview and, specifically, Ultimate Rose. Being the most authentic window on the timber-alternative market, they would match their original timber sashes like for like but with this maintenance free alternative. The windows were finished in a chalk white texture with an Edwardian astragal bar design, seamless run-through horns, deep cills, Secure by Design accreditation and shark fin limit stops throughout. Additionally, Ultimate Rose comes with ‘A’ rated energy efficiency as standard. For the homeowners, this means lower heating bills month-to-month and a reduced carbon footprint. This is due to Roseview sash windows being double-glazed and fully weather-sealed, unlike the home’s original timber windows. As a result, the homeowners now have sash windows that never need repainting and will naturally keep their home insulated and secure without sacrificing authenticity.

The Höllentalanger, at 1387m, short of halfway during the initial ascent from Germany's highest mountain, the Zugspitze, is a 'hut' millions of climbers have found shelter since 1893. Despite modernisation over the years however, the building had to be closed in autumn 2013.A replacement building was needed – and quickly too. Stephan Zehl, an architect from Munich, won the tender with his three-level, stepped building design. It has pent roof borders, which protects against avalanche risk from the eastern side; and meets all necessary current standards in providing dining facilities, equipment rooms, drying and shoe rooms and comfortable accommodation to sleep 100 people.During autumn and winter, all paths to the Höllentalanger are closed-off, as the Alpine climate makes it impossible to work for eight months of the year. Even in good weather, there are only walking tracks to the Höllentalanger, with no road access at all – so everything had to be flown in by helicopter. Rapid assembly and efficient transport costs were therefore critical to the budget and a combination of timber and pre-cast element walls were the chosen method of construction. Core-insulated prefabricated element walls were supplied for the ground level building. Due to the extreme temperature fluctuations, the concrete is subjected to pretty extreme expansion and contraction conditions. To counter this and to combat thermal bridging, it was important to install Schöck Thermoankers.

Over the next ten years Nine Elms will see 20,000 homes built, along with new schools, parks, cultural centres, a pedestrian and cycle bridge over the Thames; and the opening of two new London Transport underground stations as part of the Northern Line extension. The residential and commercial heart of this huge development is Embassy Gardens, London's new diplomatic precinct on the riverside. The first release of apartments in Embassy Gardens is the Ambassador Building, adjacent to the new US Embassy. It comprises six distinct cores, which house not only the residential apartments boasting high ceilings, abundant natural light and walnut parquet flooring throughout – but also a fully equipped private members club to rival the best in any international hotel.Inevitably, the development has attracted a sophisticated level of residents who demand the highest standards of detail throughout these buildings; and one of the key features is the wide variety of balcony types, each governed by unit size and orientation. The specific requirements at the Ambassador building involved the Schöck Isokorb® T type K, K-WU an SK. The diverse range of Schöck Isokorb® T load-bearing thermal insulation products guarantees totally verifiable performance standards, meets full compliance with the relevant UK building regulations and offers BBA Certification and LABC Registration. 

When developing new buildings, it is always important to consider the environmental impact. Responsible sourcing of materials is high on every priority list, along with reducing waste to landfill. But what about the local impact, such as the effects on local wildlife? A living roof/green roof system, such as the one installed by the Premier Contractor at Seaford Head Golf Club, is a very clear example of the steps that can be taken towards reducing this impact and providing an alternative space for wildlife to inhabit. A warm roof system was installed onto a structural plywood deck, after which a vapour barrier and insulation boards were mechanically fastened to provide both thermal efficiency and air leakage control. After the underlying installation had been suitably restrained in accordance with a site-specific wind uplift calculation, the roof membrane was mechanically fastened to complete the waterproofing system. Our PVC roof membranes have been tested and can be utilised without the need for additional root prevention barriers (test standard EN 13948), and because PVC is extremely lightweight, they are the perfect choice for these applications, reducing pressure on the underlying structure. In conjunction with our Living Roof/Green Roof specialists, a site-specific living roof system was supplied and installed over the completed waterproofing.Waterproofing System:DANOSA Single Ply 1.5mm - AnthraciteConstruction Type:New BuildWarm RoofSector:LeisureApprox. Size:900m2Warranty Period:20 Years

Located in Hampshire and partly funded by the European Agricultural Fund for Rural Development which invests in rural areas, this farm shop is packed with delicious, locally grown food and household essentials.Project Year: 2020Product: ASSA ABLOY SL510 Slim Eco 4 panel bi-parting sliding door.  See our sliding door rangeProject Background:  The client was working with a tight schedule to have an existing brick building fitted with a sliding door and pocket screens to be part of a new country store. Looking to enhance accessibility whilst giving a modern look to the traditional farm shop, they got in touch with our local expert who visited the site to assess all requirements.Solution: We proposed our SL510 Slim Eco beam-mounted system with a bi-parting operator and 22mm clear insulated laminated glazed units. Combined activation/threshold presence detection sensors and glazed pocket screens to comply with EN16005, making it a safe and convenient entrance that complimented the existing brick structure. Working together with the client and our operations team, we also managed to expedite the order to work to meet the much awaited opening day.For more information or assistance with any project, please contact enquiries.esuk@faactechnologies.com where we can provide expert guidance and detailed documentation.

A residential developer approached Hush Acoustics after an acoustic test conducted on their project in St Leonards on Sea failed to achieve the acoustic compliance level needed under Approved Document E of the Building Regulations.The problem stemmed from a separating wall between two bedrooms which was constructed using a timber stud wall and had an overall thickness of 170mm. Its acoustic design was adequate on paper, but there was one issue that had not been correctly treated.One of the rooms measured 37m3 and the other 29m3 in size, with one notable consistent feature being a screed laid over a concrete floor.An airborne sound insulation sample test was carried out with no floor covering in place and this revealed a result of DnTw+Ctr 31dB.Levels of ‘flanking’ sound were significant - this meant sound was passing under the separating wall via the floor screed. The solution proposed by Hush Acoustics was to install Hush Mat 15 over the screed floor in both rooms.The effectiveness of this solution was evident in the follow-up test result of DnTw+Ctr 44dB. Whilst this result would be regarded as an average performance in most other types of buildings, the improvement here from a poor DnTw+Ctr of 31dB to 44db showed that Hush Mat 15 had delivered significant improvement and provided a solution to flanking transmission sound sources.The ensured the residential development satisfied the requirements of Approved Document E.

 Divided into time slots so school life could go on as smoothly as possible during the restructuring, the renovation work involved changing all the functions of the educational establishment. A structure with entrances on either side, limited storage space for materials, the need to create various secure entrances to the institution consecutively according to the work phases… The BW Dumot architectural firm met these high-stake challenges with agility in organisational terms. Of course, by choosing a ventilated facade solution on a subframe and products renowned for their ease of installation and great resistance, the firm was able to optimise the External Thermal Insulation (ETI) phase.Changing the perception of the institution through the building envelopeLocated in a so-called sensitive neighbourhood, Paul Eluard Secondary School was ageing, with deteriorating facades. Its new generation design had to mark a change in order to both encourage residents to see the institution in a new light and help the students to reclaim the school.Since the college is located in a green space, away from the centre but overlooking the entire city below, the architectural firm chose a sleek design, a smooth and structured white mineral look, and the PAPYRUS finish (crumpled paper). In this way, while aiming for an understated look, the firm was able to create a strong contrast with the school’s surroundings, so that it would stand out and become a landmark.It was through the building envelope and the treatment of the facade that architect Barbara Dumont was able to express this aesthetic preference.

Brennan & Wilson Architects undertook the transformation of The Barn in East Lothian into an EnerPHit Passive House, emphasising sustainability.The project involved the conversion of a stone outbuilding, with the addition of a large kitchen extension with a planted sedum roof. The owner wanted an energy-efficient home, with no reliance on fossil fuels, which was adaptable to their changing needs should they eventually require single-level living. Rooflights were key to achieving good natural light levels inside the house, due to existing boundary restrictions with neighbouring properties. The selected FAKRO products included quadruple-glazed rooflights tailored for both pitched and flat roofs, aligning with the project's objectives. Installation was efficient with well-packaged products and clear structural guidance provided by FAKRO.The outcome is a remarkable improvement in insulation within The Barn, ensuring year-round comfort while notably reducing energy consumption. Stewart MacKenzie, FAKRO's Regional Manager for Scotland, played a crucial role in providing tailored support, ensuring the selected products met the project's unique requirements.This collaboration showcases the effective integration of architectural design with sustainable, high-quality products, creating a home that emphasises environmental consciousness and occupant comfort. Brennan & Wilson Architects are based in East Lothian, Scotland and have over 20 years experience of designing sustainable, low-energy buildings.

Project:Unity Campus Client:Howard Group Architect:Nicholas Hare Architects Value: £12m Location: Sawston, Cambridge Completion Date: June 2023 Innovare duration onsite 15 Weeks GIFA: 88,000 sq. ft Air Tightness: 1 via passive purple U-Value 0.13 (259mm i-FAST with additional insulation by others on inside face of panel) System: i-FAST/Wrap SolutionPhase 2 of a new £100 million technology and R&D campus in Sawston, south Cambridge is now complete, providing an additional 90,000 sq. ft of science laboratory space across three buildings. Built on Cambridge’s reputation within life sciences, this phase enhances Unity Campus and elevates the region’s role within the industry. Designed by Nicolas Hare architects, the building envelope is purposely designed to provide occupants with a healthy and attractive environment. Collaborative design development incorporating a concrete frame and advanced structural timber technology meant an innovative approach to the construction method could be adopted, bringing key advantages of sustainability and performance efficiency. The Innovare Offsite i-FAST Panels were selected for construction because they minimize embodied carbon compared to steel framing systems, achieving the sustainability objectives set by the client Howard Group. Effective collaboration with the architects ensured that the client’s performance specifications were agreed well in advance of the start date.

HMS Caroline – Museum ship... CHALLENGE HMS Caroline, the last surviving vessel from the 1916 Battle of Jutland, now rests in the Titanic Quarter in Belfast. After a second life as floating Headquarters of the Royal Navy during World War II, this living legend will continue to serve the country as a museum ship. For this purpose, however, extensive restoration appeared to be essential. The key requirement on HMS Caroline was to avoid penetration of the deck surface. To safeguard its historic heritage against damage, the Royal Navy sought a reliable waterproofing solution. SOLUTION Versatile and impenetrable! What used to be the properties of this battle cruiser, happen to apply to the RENOLIT synthetic single ply roofing membranes as well. That’s why RENOLIT ALKORPLAN was heralded as the optimal solution for the refurbishment of the ship’s gun deck. The lead grey RENOLIT ALKORPLAN A provided an ideal modern day solution with an impressive finish. On top of a new layer of insulation board, the calendered and laminated fleece-backed PVC membrane was fully bonded with a combination of the RENOLIT ALKORPLUS81068 polyurethane adhesive and the universal RENOLIT DUALFIX81065 glue. RENOLIT ALKORPLAN stands out above the competition given its excellent weldability, simplicity of detailing and overall versatility. Once installed, ongoing maintenance of the membrane will be minimal with a predicted life expectancy in excess of 35 years (BBA approved). On 31st of May 2016 the freshly refurbished HMS Caroline stole the show as a fitting backdrop for a commemoration honouring its centenary. 

Glazing Vision worked closely with Architect, A R C Architecture Ltd, and Contractors, Matrod Frampton Ltd, on this incredible project located in Lymington, Hampshire, where the client was looking for their new pool room extension to include a large, flat rooflight, creating a peaceful and naturally lit room, perfect for a relaxing swim. They were also looking for a rooflight within the loft area of the home to allow natural daylight and ventilation to the space.Glazing Vision’s Flushglaze Fixed Multipart Rooflight in Slate Grey Matt was specified for the roof of the pool house, which was an impressive 3800mm x 10360mm in size, which almost mirrors the size of the swimming pool below.Bespoke glass was selected for this particular project. The double-glazed outer pane was made up of heat soak tested, toughened glass which offers a greater resistance to thermal stresses and provides better protection against glass breaking, reducing risk of injury, essential with a pool directly below.Argon gas filled the space between the panes of glass which helps insulate the room and minimises the transfer of heat through the glass along with a black warm edge spacer which is an insulating plastic composite material that becomes a barrier to heat loss.The inner pane consisted of heat soak tested, toughened, PVB laminated glass which prevents glass shattering under impact by holding the shards together on the membrane so they cannot become lethal, and includes a soft coat low E rating of 1.1, helping with the energy efficiency of the room by reducing energy costs.The product was tested to class 1 in accordance with CWCT TN66/67 which is essential for rooflights which might be walked on for occasional cleaning/ maintenance activities, and which will therefore need to support both the weight of people on the glass and their equipment, which may be required on this occasion.The rooflight was supplied in 6 sections with internal back-to-back angles at the joints between each section. The 6 sections were sized to achieve an equal split when viewed from underneath.Our Skydoor Electric Hinged Access Rooflight was specified on the roof of the loft space which is ideal for ventilation and regular access, and offers natural daylight to the space below. Intelligent actuators ensure synchronized operation between the two supporting mechanisms, so the Skydoor opens to a maximum 87° in one fluid, trouble-free motion, providing you with easy access to the space above.The glass was a double-glazed unit comprising of a heat soak tested, toughened, soft coat low E (1.1) outer pane, with Argon Gas within the space between the panes and black warm edge spacer, with the inner pane consisting of heat soak tested, toughened, PVB Laminated glass, and was also tested to class 1.Both rooflights were expertly installed by our sister brand, Glazing Renovations.“Glazing Vision were helpful in explaining the two different upstands required for the different glazing systems. The installation team were helpful and carried out their work in a professional manor.” – Steve Davies, Site Manager, Matrod Frampton.

City of London Academy Shoreditch Park by Feilden Clegg Bradley Studios forms a part of The Britannia Project, regenerating a thriving London community with new facilities and amenities including new housing, a new school and community leisure facilities. Built to cater for the anticipated expanding population, the new development forms a harmonious addition to the existing neighbourhood with new, high-quality public spaces. The new secondary school for 900 local students plus a 200 student sixth form school had complex underground constraints to take into consideration in the design process, a challenge which informed every part of the building, including the choice of flooring and its installation in the school sports hall. Proposed Crossrail tunnels beneath the building meant the sports floor had to be able to cope with a much larger amount of structural movement than what would be considered normal for a building of this kind. Junckers’ technical department worked closely with the architect exploring a number of options to finally help them arrive at a solution which could accommodate an unusually large amount of structural movement and at the same time retain the sprung quality of the floor for sports and other activities. Junckers Approved Contractor V.A. Hutchison fitted Junckers 22mm solid Ash Champion over New Era battens with 125mm insulation between battens. Line markings for four badminton courts as well as basketball, netball and handball courts ensure the sports hall will serve the school and the wider community as a hub for multiple events and activities. The floor is area elastic and fully complies with EN 14904 class A4, a high-performance sprung floor which will serve the school and community for decades to come. A 22mm Junckers sports floor can be sanded and refinished up to ten times without losing performance, and with regular sandings in 12-year intervals, a lifespan of 60+ years as set out by the RIBA 2030 Climate Challenge can easily be achieved. Funding for schools issued by the Department for Education is now dependent on fulfilling strict sustainability criteria. Junckers has independently verified certification to show its flooring fulfils these criteria, In addition to the sports hall, Junckers flooring was specified for the school’s main hall, which is used for drama and other activities. The original specification was for a vinyl floor, but as a more sustainable solution, Junckers’ 22mm Nordic Oak in the Classic grade was selected. V. A. Hutchison Flooring installed the oak floor on New Era battens with 125mm insulation, including an area of 91 m2 of extra battens for support in the main hall. Jo Gimenenz, Architect at FCBStudios added: “We have worked with Junckers for many of our projects, CoLASP being one of the most recent and they always provide an excellent technical service. Particularly so on this project where we had to overcome a complex structural movement joint detail in our ground floor Main Hall, due to proposed Crossrail tunnels beneath the building. A Junckers flooring system was also installed in our Sports Hall. For this space we opted again for a solid timber flooring in lieu of a vinyl topped raised floor as it was a more sustainable solution.” 

URSA storey’s high with new Whitechapel development Global insulation manufacturer, URSA, has seen some 25,000 m2 of its specialist insulation materials specified and installed at one of the capital’s largest residential development projects in recent years. Ian Claydon, Technical Manager for URSA UK, describes the specification through to installation journey: “The Silk District is a new development located close to Whitechapel Station and within walking distance to the City of London. The Whitechapel based scheme compromises three residential blocks set around a piazza with private landscaped gardens. New commercial space on the ground floor of The Silk District will welcome many new and exciting restaurants, cafes, bars and shops. The Borough is considered an important area of regeneration for London and will meet the aspirations of neighbouring Shoreditch, Brick Lane, Spitalfields Market and Bethnal Green all of which are less than a 10-minute walk from the development.  “Our work with the London based property development company leading the scheme, Mount Anvil, began in November 2018. We provided advice and guidance on making the correct choice of materials, achieving compliance with Building Regulations (thermal performance, fire resistance requirements and resistance to rain penetration) and compliance with the NHBC Standards. We also provided numerous thermal models, U-value calculations and associated condensation risk analysis. The Mount Anvil team were undoubtedly impressed with the speed and quality of URSA Technical Services. “We were involved with external wall construction as well as the design of a brick clad rainscreen system and continued to work extensively on the scheme throughout 2019 as the design developed further. Work was delayed at the beginning of 2020 due to Covid and re-started in July 2020. Ian explained: “Collaborating with the client in these very early phases ensured that they were able to select a product that is entirely right for each and every one of their primary and secondary needs. Planning was critical within the design and roll out and meticulous attention to detail was applied during these initial phases and throughout. Key products installed included URSA’s Cavity Batt 32 & Walltec 32 – 12,000m2 and URSA Acoustic Roll - 13,000m2.   URSA Walltec 32 is a lightweight, non-combustible, semi-rigid glass mineral wool slab treated with silicon based water repellent. It is faced with a black glass tissue on one side and are ideal for use behind rainscreen cladding systems in both new build and refurbishment projects.URSA Cavity Batt is a lightweight, semi rigid glass mineral wool slab treated with silicon based water repellent. It is suitable for use in both fully and partially filled masonry cavity walls up to 25m high.Mark Guest, Regional Sales Manager for URSA UK continued: “URSA Walltec proved to be the ideal choice due to its outstanding fire performance qualities, with a Euroclass rating of ‘A1’ making it totally non-combustible and the ultimate in safety specification for behind cladding systems. URSA glass mineral wool is manufactured from an abundant, sustainable resource and utilises at least 50% glass waste. From an installation perspective, the black glass fleece tissue facing means that the product could be used behind open joint cladding without being seen.“The Cavity Batt is available in a wide range of thicknesses, ensuring the client was able to meet all appropriate Building Regulations and standards. Our new generation URSA TERRA mineral wool has a ‘soft touch’ feel making it easier to handle and install whilst still maintaining its excellent mechanical properties.“There were several other over-arching factors to consider within this scheme and those included the sheer size and scale of the site and its location in a packed city centre. The lightweight nature of both products meant that they could be compressed therefore saving time and money on transport, effectively halving the number of journeys needed. This meant that more products could be delivered to site and stored in an area where space was at a premium. “Work is now once again very much underway with an anticipated completion date of early in 2021. The property market is thriving once again and Whitechapel is becoming recognised as a hotspot for investment and is now being considered the destination of choice for many new businesses. Our distributor partner, Encon Insulation in Dagenham, worked closely alongside us during the project” Ian concluded: “It’s fantastic to see two of our core product specified at this major residential development. We have enjoyed a collaborative, partnering approach with the client throughout. The client has been keen to specify the safest, most durable, sustainable and quality product available on the market today and we’ve been pleased to support them in their design journey through to installation.”

OverviewPowrmatic was selected to supply a manufacturing facility heating system in a new 60,000sq.ft building in Manchester which was expertly installed by our trusted and long-standing engineers at Swiftheat Gas Services Limited. Four LX60 heaters, one LX90, and eight CECx4500 destratification fans were installed into the facility.Project BackgroundSystem 3 Limited, a leading manufacturer of high-specification insulating glazing sealed units and toughened-laminated glass, was expanding production into new premises. They needed a reliable and efficient heating solution for their newly refurbished premises. Swiftheat was recommended by Powrmatic, a family-run business with a reputation for providing commercial heating solutions and industrial heating installation.SolutionSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.ResultSwiftheat Gas Services Ltd provided a complete installation of the heating system for System 3’s new premises. The installation consisted of 5 ErP-compliant suspended LX60 and LX90 warm air gas heaters and eight CECx destratification fans to assist with air circulation. The building size was 60,000sq.ft, and the entire project required an 88.9mm stainless steel gas line.

Cargill is an international food, agriculture, financial and industrial products and services business. Cargill connects farmers with markets, customers with ingredients, and people and animals with nourishment.Project/doors:32 doors across six facilities12 Storm, 3 Super, 3 Mini, 6 Insulated Fast Action Roller Shutters, 4 Electric Operated Roller Shutter 4 Special Doors. Ongoing replacement of old doorsThe challenge Hart were consulted to help reduce vermin access mainly from pigeons, seagulls and geese attracted by the feed/agricultural nature of the production process. The doors needed to be capable of thousands of operations in dusty conditions allowing large vehicles fast access to the facilities. The solution With over 30 Hart doors installed across six production facilities, the latest contract replaced existing roller shutters, which remain open all day, with seven Speedor Storms, one Speedor Super and one fast action roller shutter. The emphasis was on speed of open/close cycles to significantly reduce the vermin access and improve energy efficiency. The success The investment by Cargill is also part of a drive to improve energy efficiency by 5% and to maintain a better working environment and temperatures within the building as well as preventing unauthorised access to different areas of the plant. The Review:“I wanted to say I was really pleased with the job David and guys have done. They showed great work ethic, housekeeping was spot on and their attitude to safety on site was great- whenever they were challenged they were very patient and helpful.”Gavin Dunn, Project Engineer, Cargill

Hart has supplied hundreds of industrial doors to infrastructure projects both across the UK and internationally.Project/doors:9 Electric insulated roller shutters14 Speedor Super high speed doorsThe challengeOld rail shutters are unreliable with a potential to free fall due to mechanical failure. Doors that are past their ‘asset life expectancy’ should be replaced to ensure up to date legislations are met. These areas tend to have varying traffic and need to be secure for safety. These dangerous situations can be remedied by replacing with new doors designed for purpose. The solutionHart completed a major contract to replace old and unreliable shutters at the Stewarts Lane depot, Battersea. The contract included the removal of old doors and re-installation of nine doors of varying sizes, the largest being 8.5m wide and 4.7m. Safedrive motors delivered quiet and smooth operation despite the size and improved security and safety for staff.The successHart replaced 14 of it’s own Speedors installed at Laira Depot, Plymouth which were still operational after 22 years. This is an astonishing length of service and a testament to the quality of product. Hart’s reputation for technical excellence developed over many years has given Hart a distinct edge when involved such contracts.The Review:“Your installation staff were extremely efficient and friendly workers. They carried out the work safely in a professional manner and there were no issues or problems on site. Both of them were a credit to your company.” First Great Western Ltd

Altro kitchen system provides a perfect fitAltro Whiterock White, Altro Stronghold 30“We chose Altro Whiterock because it provides an easy to maintain, hygienic surface that is ideal for kitchens and have up to date fire certification.”Ben Rodgers,Cladpro LtdIssueBannold are one of the UKs largest independent family run suppliers of natural hard landscaping materials. Based in Cambridgeshire, Bannold wanted to refurbish 1920 railway carriages to create a tea room for customers.The Carriage Tea Room had a dated wooden substrate that needed to be replaced with a modern hygienic clinical finish for the kitchen facilities. The walls were not a square flat surface and needed a flexible product that could be fitted into the space. Floors and walls had to be easy to clean and maintain and fit into an environment without a straight line.ApproachCladpro are leading Altro Whiterock Premier installers specialising in hygienic wall finishes, floor coverings and ceilings. They suggested the Altro kitchen solution for the kitchen carriage. All the walls were thermoformed and wrapped to fit the unusual shape of the carriage.SolutionAltro Stronghold 30 keeps staff safe, with Altro’s highest slip-resistant rating of (PTV 55, R12) even with common kitchen contaminants such as grease, oil and flour. With 3mm comfort underfoot and 10dB impact sound insulation, it makes busy and noisy kitchen environments more comfortable for staff. Combined with Altro Whiterock it creates a full sealed solution to maintain the highest levels of safety and hygiene.

OverviewThis project saw the refurbishment of King Solomon International Business School, which was changing hands from office use to education. The building now features specialist science rooms, resistant materials workshop, drama studio, outdoor sports hall, music rehearsal rooms, food technology, ICT rooms and language rooms.ChallengesDue to the change of building use, a full survey of the roof covering was required. Excessive moisture was found within the existing asphalt covering, water ingress was present and the internal top floor of the building was not suitable to be used as a teaching space. The roof area presented many challenges with complex detailing to existing balustrade posts, live mobile telephone masts and large quantities of plant / M&E installed.SolutionsAs a starting point, the roof was completely stripped due to the high level of water ingress. The existing asphalt covering was removed ready for installation of a new Excel RBM system, with Hytherm ADH PIR thermal insulation. Much of the existing M&E was found to be redundant and could safely be removed from the roof area.The complex detailing to the balustrades and fire risk areas was simplified using Starcoat PMMA cold applied liquid waterproofing, allowing for a long term, robust and financially viable solution. High level roof areas were also detailed with ease using Starcoat PMMA. Successful installation provided a peace of mind roof covering for the next 25 years, supported by Axter’s Platinum Guarantee.Systems in useExcel®Starcoat® PMMA

This amazing swimming pool refurbishment project in Knutsford, Cheshire was undertaken by Abstract Pools Ltd. Tiles from Designworks and more than 100 JACKOBOARD® construction boards were used.Manufactured with an extruded polystyrene (XPS) foam core and a special coating on both sides, JACKOBOARD® construction boards form an ideal base for tiling. The surfaces of the JACKOBOARD® system provide an extremely strong bond and can be used on virtually any substrate. The boards are waterproof, thermally insulating, truly lightweight and very strong. This combination of characteristics makes them ideal for pool hall work. The result of this refurbishment is absolutely stunning and the owners of the property are delighted unsurprisingly.The owner was abroad while the renovation was carried out. The pool was situated in the basement of the house and had been left empty for a few years. The contractor was tasked with refurbishing the pool hall and bringing it back to life. They stripped everything back to the existing substrate, and then rendered and screeded the pool itself, the jacuzzi and the pool surrounds.A new steam room was added, using JACKOBOARD®. All of the pool hall walls were lined with JACKOBOARD®, ready to receive tiles. All tiles on this project were supplied by Designworks Tiles, the specialists in tiles and mosaics for swimming pools and spas. The tiles used on the project were Ezarri Lisa Black Mosaic for the pool tank, District Grey 1200x600x10mm for the pool hall walls, District Dark Grey for the pool coping tiles and District silver 600x600x10mm for the pool floor surround

Client: Northacre Consultant: Vinci Technology Centre Main Contractor: Multiplex Main Product Used: Emseal ColorsealThe development of The Broadway creates six buildings on a plan designed to frame views of the Grade-1 listed 55 Broadway across from Victoria Street in Westminster, providing residential, office and retail workspace and a new public space linking Victoria Street with Broadway and Dacre Street. The new building elevations were specifically designed “to reference the local vernacular in the rhythm of facades”, using materials sympathetic to the traditional sandstone and brick of the adjacent historic Conservation Area. The façades and their constituent precast panels were therefore a critical element in the design and construction process, as was ensuring that the joints between them could safely accommodate the anticipated thermal and any other structural movements, whilst always maintaining a watertight seal. This was further complicated by the façade design and necessary construction tolerances, meaning that the joints varied in width, resulting in high joint movement capability demands. A test programme was established with Vinci Testing Houses to determine the most suitable joint solution available to meet these challenges in detail - and the clear winner was Emseal Colorseal. This is a unique, preformed, double-sided, silicone-faced movement joint sealing system, that is bonded in position without invasive metal anchoring. Colorseal is CE-marked and ETA-certified to provide a watertight seal with 100% joint movement capability, thermal insulation, UV stability, and colour coordination with vertical or horizontal substrates.  

TRC Windows have been appointed by Bournville Village Trust for the first phase of a six year planned works program to supply and install bespoke sash and casement windows to 46 properties in the Bournville Village estate.The rented dwellings in Bournville Village consist of bungalows, maisonettes, flats and family accommodation.The estate also features a variety of special needs housing particularly for the elderly and people with learning disabilities.Two areas of the estate have been declared conservation areas and there are a number of buildings of architectural interest and historical importance.Window profile & thermal performanceTo meet conservation requirements, window profiles will match the style, configuration and visual appearance of the existing windows (including glazing bars, horn detail, beading, etc).For each building, they will be be supplied and manufactured in preservative-treated softwood.The thermal performance of all windows and doors will meet the requirements of the Building Regulation Part L1B and have a minimum Window Energy rating of 1.4u-value.Measurement and surveyThe process will involve the removal of existing windows and doors where necessary and installation of the new timber frames and glazing.All equipment, scaffolding and materials employed to fix and seal the windows and doors inside and outside the dwelling will be in accordance with the BS 8213-4 specification for surveying and installation.In instances where the structural box frame is to remain, allowances will be made for minor repairs and redecoration.Narrow cavity glazing (A rated)Narrow cavity insulated glazing units (IGU) will be installed so as not to compromise energy-efficiency and authenticity.These units will meet the requirements of BS EN 1279 and be manufactured by a Kitemark or similar accredited manufacturer.

Bradstowe House is a fascinating opportunity to not only rescue a historic building but also do it in such a way that will make the property sustainable. When Comer Homes decided they wanted their piece back after experiencing one too many economic downturns under this roof (pun intended), what came up wasn’t anything short of astounding: The long-abandoned concrete frame had become nothing more than dust and decay; its glory days are forgotten — until now!Bradstowe House, designed by Comer Homes’ UK in-house architects is a contemporary landmark for Harrow. The building’s curving glass and steel form give way to ample underground parking as well the rooftop terraces which make this development an iconic example of modern architecture that can be found anywhere from London city all too small towns across England!Bradstowe House offers a diverse range of rental apartments that are designed to suit your needs. With modern kitchens and fully integrated appliances, our high-quality homes offer the perfect space for gatherings with family or friends alike!The old cladding of the building was very outdated and it required a lot of maintenance. The new planning permission allows for an aluminium panel (Valcan VitraDual) curtain walling system, which is much more durable than granite panels while also having better insulation qualities!Valcan supplied and delivered approx. 4100m2 of Valcan VitraDual in Cornish Granite & Riddle Grey.