"stone quarried stonemasons restoration"

The ChallengeNo. 1 Horgan’s Quay is one of the development’s three office buildings, with the upper floors of the new modern structure cantilevered over the site’s original Goods Shed. The lobby area features a large glazed partition on the first floor, helping to create an open, light space, as well as sympathetically blending the old restored structure with the new.KCC Group, a door and glazing contractor, were appointed to deliver the EI30 SWS Screen works on the project. Site Contracts Manager, Ger McNamee, said: “In order to ensure the safety of those within the building, 30-minute fire protection was required for the reception area, providing a fire barrier between the lobby and the first floor. Once we had the fire safety glass specification from the architect, O’Mahony Pike Architects, it was up to our team at KCC Group to source a supplier – this is when our relationship with Pyroguard began.”The SolutionTo ensure that the desired aesthetic was achieved, while also meeting building safety regulations, Pyroguard Infinity T-EI30/24-2 SWS fire safety glass was chosen by KCC Group and installed in the glazed partition, within a Jansen steel profile system.Pyroguard Infinity is a range of fire safety glass certified for butt-joint applications. With no vertical frame profiles required, it’s the ideal solution for providing visually appealing seamless partitions. Manufactured to EI classification, Pyroguard Infinity provides the highest level of integrity and heat insulation, protecting against flames, smoke and heat.

Over the past two years, The Pattern Shop has undergone meticulous restoration to provide stunning and sustainable office space. The structure of the building provides more than 3,000 square metres of adaptable office space with southerly views across the River Tyne.We have been working alongside Workwell Furniture to manufacture and install Heated Z Lockers for users to store personal belongings and allow commuters to dry damp garments.Throughout this project, our team provided and installed 6 heated Z lockers to accommodate 12 users. Z-shaped lockers are an excellent choice if space optimization is key to your design. These lockers have a small footprint but maximised internal space. They can comfortably hold large personal items as well as hanging items just as clothes. The specifications of the Z Lockers were 1775mm high, 350mm wide and 450mm deep with perforation, to allow the air to flow around the lockers.The stunning Z Lockers were manufactured with an aluminium carcass, and stainless steel frame, suitable for environments with high humidity. The laminate was in beautiful ‘Pleated Teak’ from the Helmsman laminate colour chart. The carcasses of the lockers were powder coated in the Helmsman metal colour range ‘Smoke’, to create an aesthetic locker. Heated Z Lockers were finished with diamond latch and black laminate number plates, an aesthetically pleasing pairing.If you have a project where you need Heated Z Lockers for a wet or dry environment, contact us today at 0184 530491 or get a quote here today.

While the summer holidays are going on, many schools are thinking about restoring, replacing, or expanding the current lockers. The holidays are a great time to get these jobs done, as it's much quicker for installers to operate and they don’t get in the way of your students. Our Team at Helmsman manufactured and installed new lockers replacing the old ones at Weald of Kent Grammar.  Weald of Kent Grammar is a secondary school that has a strong focus on academic achievement and selects pupils based on their ability.The school requested metal lockers, with 3 compartments and 1 compartment with metal sloping tops. Metal lockers are a beneficial option for schools, as they can come in a range of compartments, colours, and sizes. The school requested sloping tops that prevent people from using the top of the lockers as a storage area, which can create a safety hazard if items fall or if students climb on top of the lockers.Our team manufactured 98 one-compartment lockers with the size of lockers 665mm high, 300mm wide, and 450mm deep. Also, three compartment that is 1775mm high, 300 wide, and 450 deep. The colour of the lockers was requested to be ‘Ultramarine Blue’ with body colour to be ‘Ice’. With sloping tops to be 'elegant grey' and extended by 80mm. With the lockers, they have requested Cam locks which would make students feel guaranteed that their belongings are safe and secure.It was great to work again with Weald of Kent Grammar on this project. If you have a similar project or want to know more about school lockers, give us a call at 01284 530 427.

This surreal manor house has been converted with the help of five bespoke Ridgeglaze rooflights from Glazing Vision, to provide a constant flow of natural daylight throughout this new renovation.This secluded manor house in Mawgan Porth near Newquay involved a combination of new-build and refurbishment to help create a special property with interlinked courtyards. Gardens and entertaining spaces that reconnected this house with its rural location.A property which had lost much of its character due to previous poor-quality extensions and renovations was in desperate need of an overhaul and some true care and attention to help provide the clients with a home they could cherish.CSA Architects were entrusted with this mammoth task and working closely with builders P Chapman Construction they have been able to capture the true identity of the property and its marvellous countryside surroundings.From the point of arrival, the driveway leads guests to a grand entrance hall, that seamlessly links the original house and the new buildings, whilst also connecting directly to the surrounding landscaped gardens.Renovating the original house to provide guest accommodation that is both cosy and functional, the extensions have created large open plan living and dining spaces, a sitting room, games room, and functional boot room.The use of 5 multi-part Ridgeglaze rooflights from Glazing Vision add an abundance of natural daylight throughout this new renovation.Providing the perfect addition to the apex roof line, allowing glazing on both returns, and in keeping with the juxtaposition of rustic and contemporary which is almost flaunted throughout the home.Given the history of the building, double glazed rooflights were used with a low e coating for maximum thermal performance. The low e coating on the glass allows most of the visible light to pass through as well as the short-wave heat energy but blocks long wave energy from passing through. This ensures the heat from inside the building is reflected, back into the room, and so heat losses are significantly reduced.Throughout the property, unique characters have been retained but with carefully selected improvements to emphasise the potential within the property. The rustic stone floor and extensive areas of Crittall-style glazing sit against the original stone wall of the house and form part of a rich palette of high-quality materials. The use of reclaimed wood cladding, brick walls and oak beams are brought together around an exposed steel structure that define the main living spaces.

CHALLENGEWestfield, the world’s largest listed retail property company, is set to change the face of retail in the United Kingdom with the opening of its new flagship development – “Westfield London” – at White City, London.Beneath a spectacular, undulating glass roof, the £1.6 billion Westfield London destination combines over 150,000m2 of retail, restaurants, cafes, bars and leisure facilities to create the ultimate shopping and leisure destination.Westfield London will act as a catalyst for the redevelopment and regeneration of the wider White City area with a further £1billion investment expected in the immediate vicinity over the next 10 years.SOLUTIONKnauf Insulation supplied Rocksilk® RainScreen Slab as part of the rainscreen cladding system to the external stone clad façades of the development and internal stone clad stairwell and elevator areas. The specification of Rocksilk® RainScreen Slab provided both performance and installation benefits to both client and specialist installing contractor.Rock Mineral Wool has a Euroclass A1 reaction to fire classification to BS EN ISO 13501- 1, the highest classification available. With rainscreen cladding incorporated into building design fire performance is particularly important and, as such, a non-combustible component such as Rock Mineral Wool provides the ideal prevention against the spread of fire. The non-combustible nature of rock mineral wool ensures that it will not burn, will not give off toxic smoke and will not suddenly ignite in a fire due to ‘flashover’.Another key specification element related to the speed and ease of installation. The required thermal performance of the building was dependent on the correct installation of the specified insulation product. Rocksilk® RainScreen Slabs are easy to install down to their superior workability ensuring installation stayed within the tight time constraints. Rocksilk® RainScreen Slab is treated with a water repellent additive to ensure the building structure is protected against rain penetration and it can also be installed with either face adjacent to the sub structure.Rocksilk® RainScreen Slab provides an additional benefit for the installing contractor as it is designed to adapt to minor imperfections in the building’s substructure. The rock mineral wool product ‘knits’ together, ensuring intimate contact between slabs ensuring all joints are closed and thermal efficiency is maximised.Rocksilk® RainScreen Slab has excellent acoustic properties, which contributed towards the acoustic performance of the structure in order to comply with both sound insulation and sound absorption requirements.What’s more, individual packs of Rocksilk® RainScreen Slabs are compression packed together in Knauf Insulation’s innovative packaging method, Supakube. The advanced compression technology and strong packaging materials ensure the product is easy to transport and store, reducing environmental impact and causing minimal disruption on site and the surrounding area.

A moment of Introspection Before the Big RevealMorrow+Lorraine had a bold vision for the contemporary 123 Hub. The lobby was no different. Home to Google and ENI Trading, prestige and performance was imperative throughout the building.123 Hub has a modern and neutral design scheme, using stone, wood and natural fabrics, which the luxury Entrance Matting needed to complement and protect. It tirelessly maintains its classic look while enduring and cleaning the shoes of users of the 200,000 ft2 office space. INTRAsystems has worked with Morrow+Lorraine on a wide range of projects so the practice knew the design potential of our product range.With its clean lines, INTRAflex XT was the preferred choice for their chevron scheme. It offers flexible configurations for a wide range of designs, as well as quality performance and proven longevity.Fusing Form and Function for Architectural ImpactINTRAflex XT has a heavy-duty aluminium frame available in a standard silver finish, anodised bronze or black. Each option comes with a 10-year warranty so will stand the test of time. Made from 100% recycled aluminium and fully recyclable, it also represents a sustainable option, as verified by EPD.For added practicality, INTRAflex XT sections are removable to help maintenance and cleaning. There’s no need to wait for service visits or specialist tools. On-site teams can lift each section to remove any debris or excess moisture, minimising disruption.As one of our most specified products, you can find it used extensively in prestigious locations.Elite Performance, Smart Aesthetics, Luxury Entrance MattingMorrow+Lorraine opted for INTRAlux® Elite Grey 606 fibre inserts to add a subtle colour and textural change, while complementing the stone floor beyond and enhancing the overall neutral monochrome palette.The simple appearance belies the advanced features. The INTRAlux® Elite fibre has a mix of coarse and smooth fibres made from 100% Econyl regenerated nylon, offering excellent scraping and sound absorption. It has excellent UV-resistance, fire resistance, and slip rating.Precise and practical installationFrom the chevron design Morrow+Lorraine supplied, we created an intricate plan for the install team; clearly labelled each component and supplied in oversized lengths to allow for tolerances and anomalies on site.We also provided spares just in case, as the install team had to work around some immovable features.The flush, glass revolving doors would have been particularly tricky for a lesser product. With our detailed plans, an innovative product and skilled installers, the effect is unassuming perfection. Explore Tiling and Flooring did an incredible job.

An architectural marvel located in an area of the capital rich with history.In the centre of one of the most famous cities in the world and a stone’s throw away from the prestigious St Paul’s Cathedral – the commercial entrance matting at Newgate Street had to be as eye-catching as the location it sits in. We were specified early on for this project – working closely with SDS Matting who are familiar with our market-leading capabilities. For this design, incorporating the alternating narrow stone strips was a priority feature for the client – a challenge, but end results like this are always worth the effort.Two products, one Elite solutionThis creative execution called for a combination of two innovative products. For the revolving doors (where foot traffic is always heavily concentrated) INTRAflex XT with Elite fibre inserts was specified to deal with most of the dirt and moisture. As one of our most popular products, INTRAflex XT offers optimum durability, performance and aesthetics. For the strip style beyond the revolving doors, INTRAflex SP achieves the striking finished effect you can see in the photographs.The strips of INTRAflex SP are inset into the terrazzo tiles following the direction of travel. As most Entrance Matting Systems are set perpendicular to the direction of travel, this particular design was a great opportunity for SDS Matting to demonstrate their expertise. Laying the matting perfectly to line up with the entrance matting surrounding the revolving doors was one of the big success stories of this project.The INTRAlux Elite black fibre inserts used at Newgate Street contain a monofilament scraper element to remove dirt effectively and, in the classic black colourway, play into the colour scheme perfectly to complement the architect’s overall foyer design intent.Moving in a new directionQuality was a high priority for this project. As Entrance Matting specialists with a proven eye for design, we were specified early on by Buckley Gray Yeoman having worked closely with them before. The added element of laying the matting in the direction of travel called for a matting product that could be installed with ease. Of course, INTRA systems is the name that will always come to mind.The end result is Entrance Matting that truly adds to the visual identity of the building. From floor to ceiling, the foyer is a unique space. Our specification consultants always enjoy the opportunity to get creative with clients – and this project was another example of how INTRA helps architects turn something pedestrian into a signature focal point.If you’d like your project to look this good from the ground up, get in touch with us today to find out more about our range of products. Or simply view our complete range on our website here.

An eco-friendly development targeting the Passivhaus Low Energy Building Standard, Castle Hill House provides undergraduate accommodation for students of St Peter’s College, University of Oxford. To ensure the scheme sits comfortably within the historic environment adjacent to Oxford Castle, Design Engine Architects specified Vandersanden’s Chaucer Suffolk and Majestic bricks.The prestigious scheme provides 54 bedrooms on a challenging site. On one corner is Canal House, the Master’s residence with a large garden, on the other, the Law Centre. It is bounded by New Road, a main route into Oxford, and Bulwarks Lane; between the two, there is a one-storey level change in the topography.To address the level change, a podium was created across the site which houses a bike store, plant rooms, toilets and offices. On top of the podium are the two residential blocks with the front building standing three storeys above the podium and the rear four storeys, the building stepping up as the natural ground gradient increases. Between the two is a central courtyard with bedroom windows of both buildings facing across it. This space also allows connection to the main university campus on the other side of Bulwarks Lane. The scheme is in a conservation area that includes listed buildings and Castle Mound, a scheduled ancient monument. Quite a variety of materials are evident in the surrounding buildings but, within the material hierarchy, brick was the most appropriate and Chaucer Suffolk was an ideal match to the ashlar, ‘Oxford’ buff colour of Canal House and the Law Centre. Vandersanden’s Majestic brick matches the greyer rusticated base of Canal House, so was ideal for the podium that runs into the wall at the rear of the site. “We were struggling to find bricks of the right colours, particularly for the grey bricks where we were looking for a very specific match but, once we found Vandersanden’s Majestic, we didn’t look back, they’ve been incredibly successful,” explains Richard James, associate at Design Engine Architects. “The Chaucer Suffolk provided exactly the right buff colour, not only matching the existing stone of the surrounding buildings but having the texture and tonal variety that gives it a warmer feel.”A fairly natural mortar colour was used throughout for both brick types, helping to blend them together and add a little more warmth to the overall tone of the two bricks.A variety of brickwork details have contributed to the success of the scheme. Within the brick piers of the faceted facades are areas of hit-and-miss brickwork that leave out the headers. These allow the window panels in the bedrooms to be left open to create natural ventilation and also provide some rain protection and security. Panels of hit-and-miss brickwork have also been used to fill in and repair existing walls, including the old stone wall on New Road. A staggered zigzag pattern was employed to replicate the texture of the very rough old stone walls on Bulwarks Lane.The buildings follow the site’s irregular shape so a large number of ‘cut stuck’ brick specials were employed to deal with the changes in direction of the walls. Pre-cast, brick-faced lintels and support units were also used at various points across the facades.The development targets the environmental standard ‘Passivhaus Institute Low Energy Building’. Passivhaus buildings are characterised by especially high levels of indoor comfort with minimum energy consumption. This is achieved by significantly improving the building fabric in terms of thermal insulation and airtightness, thereby minimising energy loss to a level that minimum space heating is required. “We’re really pleased with the bricks, the colour match has been even better than expected and the quality of the brick is probably one of the best I’ve seen,” enthuses James. “They’re not the cheapest brick on the market but the effect and the quality is much greater than their expense. Vandersanden will be the starting point for future projects requiring this level of quality.”To find out more about the bricks used in this project or to see the wide range of high-quality bricks available from Vandersanden, click on the 'View more' link

Project DetailProject: Motel One – ManchesterLocation: Manchester Piccadilly, UKProduct: TS.9000 range of architectural closers for main reception and TS.3000 range of contract closers for apartmentsProject Description“Manchester has got everything except a beach,” said Ian Brown, lead singer of The Stone Roses. The city in the northwest of England is known as a party and music capital. Bands such as Oasis, The Smiths or The Chemical Brothers have their roots here. However, if you want to experience all the different aspects of this diverse city it would be best if you booked a longer stay at your cheap and centrally located Motel One Design Hotel in Manchester.Brand new and built in a very tight but friendly spot the Motel came as no surprise requiring a couple of door closers for its Hotel and resting overnight stay accommodation. The TS 9205 were chosen for heavily used entrance area and the TS 3204 were chosen for their bedroom doors because:They are supported by an established companyHave excellent right up and guaranteesVery easy and fast to fit and adjust making them the perfect answer for the contractor and door manufacturer.

Designed by architects from Qatar, this complex villa has a very different design from the usual house models; Clean and angular forms which are broken up with massive section of timber structures. These structures are not ordinarily large section of timber. They are created in house at Technowood and serve as a “reduced timber option”. Furthermore, with only using 2% when compared to using sold timber for the same project.Stone, metals and glass are the main texture of the design. These white tones of concrete structured against panels of natural timber, it’s most eye-catching feature. Located in Dohada, one of the most modern cities of Qatar, this futuristic house is also accompanied by the tranquil nature of the pool and the wooden sunbathing areas surrounding the secluded exterior.When working with designs for projects, Technowood allows the Architect to think big and realise big at the same time. Unsupported beams of this natural material can span up to 12 metres unsupported… imagine this section in a hard wood, the weight would be tonnes in comparison to the lightweight Technowood option.Credits and Further informationLocationDohada, QatarMaterialsCantilevered Bris Soleil, solid forms and cladding in TechnowoodProjectPrivate Villa

Perched on an elevated plane above the tranquil Suffolk village of Rattlesden, Rising Sun Hill is a bespoke residential housing development that seeks to blend in with its surroundings while standing out among other new builds for its character.The 22 homes include eight that will be offered as affordable housing. Individually conceptualised, the homes feature finishes that draw on traditional materials and designs, such as weatherboarding and rendering. To reflect the space of the surrounding countryside, the homes (which range from 2-4 bedrooms) are roomy, both inside and out. Large, landscaped gardens, stone paths, patios and generous planting of shrubs and trees complete the idyllic setting.But attention to detail hasn’t just been dedicated to aesthetics. Consideration has also been given to the homes’ long-term sustainability, with each home being fitted with an air source heat pump and well-designed insulation.The very fabric of the buildings, from the blockwork to the timber frame, has been scrutinised too. For developer Hartog Hutton, it was just as important to use high-quality materials as it was to give each building its own individual flair.

Historic music hall renovationLindab Rainline has been used by Forrest Construction on this new-build residential development project, Queens Court, which comprises of 17 one and two bedroom apartments, each with access to open space.The scheme sits on the original site of the historic Queens Hall where musicians including The Beatles and Stone Roses once played. The hall closed its doors to the public in 2004 and was demolished by the council in 2012 following a fire at the site.Architect, Denovo Design; appointed to the project by Halton Housing Trust; specified galvanised steel rainwater drainage for its durable and recyclable characteristics and to coordinate with safety railings on the upper terraces.Neil Ashworth, head of new build at Forrest said: “The development has seen us regenerate the entire Queens Hall site with new affordable homes built to a high specification of sustainability and energy saving standards”.The project received high critical acclaim, going on to win the Building Excellence Award for Best Small New Housing Development, and the Green Apple Awards Bronze Award for the Built Environment and Architectural Heritage. 

Material and system specification used: Kalzip FC rainscreen in 500mm wide RAL 1035 pearl Beige and RAL 7022 – also Kalzip wall perforated        Stephenson Quarter is a major mixed-use development in the heart of Newcastle upon Tyne by the Clouston Group. The site was home to the Robert Stephenson and Co. Locomotive Works, the crucible of the railway industry, where the revolutionary Rocket was built in 1829. The site includes the new Crowne Plaza Hotel and The Rocket (offices) plus Stephenson qtr Car park   Installation of over 1500 m2 of FC rainscreen cladding to the Rocket building in RAL 7022 and RAL 1035 Pearl Beige in between stone cladding on the Crown Plaza Hotel Kalzip Perforated facade was used to create a feature between the main brick work for the car park Key challenges overcome:  With 3 phases of the project to undertake over a period of 18 months. Working at height in a very tight, exposed city centre location, needed a high quality over-cladding solution with neat joints that was quick and easy to install. The product needed to integrate with the window system and other cladding facade materials   

In the picturesque Wachau Valley, among numerous vintage taverns and art galleries, lies the city of Krems an der Donau, an ancient town on the Danube that enjoys an exclusive natural landscape surrounded by greenery.A short walk from the city centre, nestled among the surrounding vineyards, the Steigenberger Hotel and Spa offers guests a warm welcome with a modern style where they can breathe in a calm ambiance with relaxing views of the old town of Krems or the Danube Valley. In this setting suspended somewhere between tradition and the search for contemporary style, the elegance and practicality of Atlas Concorde products stand out in some indoor areas of the building. Realism, simplicity, and technical performance: the strength of a natural material inspired by stone covers the walls of the rooms in a warm shade, creating a strong yet natural and welcoming atmosphere. Veins, shading, and inclusions of materials offer a contemporary design, creating a synergy between reliability and beauty. On the other hand, the interpretation of the concrete effect in a ceramic material creates the perfect background to experience moments of relaxation in the suites and the spa. Original decorations and elegant porcelain surfaces embellish these spaces, the floors and tiles interacting in perfect chromatic harmony.

SubFloor raised steel flooring was used to renovate, raise and level a 285 m² listed museum floor into a modern meeting space in Ellesmere Port, Liverpool.This simple and elegant solution raised an uneven stone floor up to 300 mm to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height. Steel joists were used to meet moisture requirements in the port area and underfloor heating plates were assembled on top.Products:Steel Joist 45x30x3800 mmSubFloor Screw 300 mmScrew FootInsulation Bearer 120 mmInsulation Bearer 95 mmHeight Variation: 50 - 303 mmSystem Weight - c/c 400 mm: 2.88 kg/m²Materials:Steel SUB250 GD, Z100 GalvFibre-reinforced VitamidePolyamidePoint Load 50 x 50 mm: 5.78 kN6.78 kN/m² - Between screws10.54 kN/m² - Over screw at joist edge[According to SS-EN 1195:1998] 

Fifty5ive Queen Street, Salford is a new 18 storey, 220-unit residential building in the centre of Salford for local developer Salboy.It includes modern, high-quality 1-, 2- & 3-bedroom apartments and duplexes, amenities include private resident workspace, gymnasium, yoga studios, resident cinema room and a terrace garden. Domis Construction is the preferred construction partner for Salboy on this scheme. In early 2022 they approached Encon Insulation in Chorley looking for a more readily available alternative to the stone wool product already specified. URSA UK Ltd was chosen to fill the void and keep the scheme on track. We supplied over 4500m2 of 100mm URSAPAN BLACK - a unique glass mineral wool rainscreen cladding insulation slab; ·      Euroclass A1 fire rating (non-combustible).·      Thermal conductivity of 0.035 W/mK.·      BBA Certified. Kate Fox, Area Sales Manager for the Midlands stated, ‘Following the success of this initial partnership URSA are now the preferred supplier of rainscreen insulation and our products are currently being used on Anchorage Quay in Salford with others in the pipeline including Derwent Street in Salford’.     

The team at Moorlands Lodge Care Home, situated in the Surrey South Downs are there to welcome you for a guided tour around the home and discuss your specific care needs.Moorlands Lodge Care Home sits in a beautiful rural location, surrounded by local places of interest including National Trust properties, gardens, and art galleries, and with excellent transport links to nearby Guildford and London. Only a stone’s throw from the bustling market towns of Haslemere and Farnham, Moorlands Lodge Care Home offers a warm and welcoming environment and the very best in residential care, nursing care and dementia care. With 97 rooms, residents can choose between one-bedroom, two-bedroom, and studio apartments, all with en-suite shower rooms and some with kitchenettes.The Una was used in this building. The Una is a timber leaf riser door system with a concealed metal frame. Provided as a full metal door set, made to size and delivered to site as a flat-packed kit prepared for all ironmongery. The wood door leaf comes with hinge cut-outs and can be primed for on-site finishing or pre-finished in our factory. Choose from non-fire rated or fire rated to E30 or E60.

Expanding Exeter College's 700-year-old campus in the heart of Oxford was a privilege given to Alison Brooks Architects: developing Cohen Quad, a hub for students including living accommodation for 90, an auditorium, seminar rooms, social learning spaces, an archive, a café, roof terraces, offices, and fellows' accommodation.Student rooms and fellows' studies are enclosed by patterned stainless steel that folds across wall and roof surfaces, sitting on a stone-clad 'base' that houses the quads' public spaces.The Rimex tiling in the checkerboard pattern really highlights the stunning dormer windows and the beautiful curve of the tiles from the roofline wrap around the roof and down the walls creating a seamless cloak around the building. 17,000 iridescent stainless steel shingles adorn this roof, and the tiles are of a wonderful muted bronze and champagne colour with an unusual texture - catching - but not reflecting the sunlight. "We were given excellent technical and sales support from Fixfast. All stainless steel fixings and shingle clips were supplied in a timely and efficient manner. These factors contributed to Roles Broderick Roofing Ltd winning the NFRC Roofing Award for 2017"Ben Clark - Operations Director at Roles Broderick Roofing Ltd

The Old Grammar School House in Shrewsbury is a Grade II listed historic building, which was formerly part of the school and has been converted to an office space.KEIM were approached by Randle Building Solutions, who had used KEIM Mineral Paints on a previous project in Edgmond, Shropshire. The conventional painted stonework was flaking and blistering due to excess moisture trapped within the substrate. The painted brickwork on the front of the building was in good condition.Bryan Roe of KEIM Mineral Paints recommended stripping the paint off the stonework and the brickwork at the back of the building, using KEIM STS 7M, that was holding damp and flaking. The gloss paint on the stone windows surrounds were to be stripped as much as possible and sanded down to create a key for the mineral paint to bond to.KEIM Contact-Plus was diluted with KEM Soldalit Fixativ to equalise surface textures and fill hairline cracks. KEIM Soldalit, in a bespoke grey colour (KS01 0312) that was matched back to the original paint colour, was applied to create a breathable, long-lasting finish.KEIM Soldalit is fire resistant and A2-s1, d0 classified. The sol-silicate properties mean that it can be applied over unpainted and previously painted surfaces without the need of a primer.

Breathing new life into a 16th century farmhouse in Redmarley, Gloucester, Durbridge House has undergone extensive renovation works. Bryan Roe of KEIM Mineral Paints, visited the property and found evidence of algae, and flaking paint. In order to provide a solid foundation on which to paint, a skim coat of KEIM Universal Render for the base of the exterior stonework was recommended, to consolidate the fried stone and create a bell shape for improved water shedding.The damp chimney stack on the north elevation was stripped back, using the DOFF system (a high temperature, low pressure method, which is least invasive for the brick facia), to release trapped water and left to dry for two weeks prior to re-decoration. Bryan recommended removing all loose material by wire brush, as well as stripping the chimney stack and base of the stonewall to the north elevation, as much as possible.To remove the red algae, 50:50 of bleach and water was advocated, in addition to KEIM Algicid for mould and algae growth. The KEIM Royalan system was recommended, due to its durability and breathability. It was applied to the newly skimmer render and will provide a long-lasting coating, as its highly resistant to fungal and algae growth, while also being resistant to airborne pollutants and acid rain. 

AG were tasked with installing paving flags at the new entrance of the Portlaoise Retail Park as well as lifting and replacing the old paving at the existing entrance.The TerraPave® flag, manufactured from aggregates sourced from around Europe, was chosen as a fine quality concrete alternative to natural stone, which helps keep costs down. It was also selected for conforming to current BREEAM sustainability criteria which AG include as standard requirement. TerraPave® also requires little to no maintenance and is completed in ground and textured finishes, giving it a more attractive look compared to other paving solutions.John Donnellan, Key Account Manager AG, said:“We felt the TerraPave® flags were the best products for these highly pedestrianised entrances due to its glowing track record and the similar projects it’s been used for. TerraPave® is easily maintained and retains its colour very well and these were the qualities Harcourt Developments required due to the heavy footfall at the Retail Park. After 6 years the flags now look in pristine condition.”The old paving was replaced with our TerraPave® Genoa Ground flag for its unique design and eye-catching finish.

Opened in April 2019 by the Mayor of London, Sadiq Khan, Hounslow House is the new greener-energy HQ of Hounslow Council in London.Building plans for the new purpose-built council offices included a rooftop communal area, and, impressed by what the team at AG could offer, it was agreed that AG’s TerraPave® premium granite flags perfectly fitted the requirement for a smooth granite finish flagstone, providing a more superior product than the original spec while also ensuring significant cost savings on the project.The 500m² area was given a beautiful aesthetic look through the use of our TerraPave® Rimini and Milano Ground (400x400x50mm) which was calibrated and laid on pedestals for speed of construction.Offering an attractive, cost-effective and practical alternative to traditional stone paving, TerraPave® is a favourite choice with architects and specifiers – and this is one project that proves why that’s the case.Dan Smith, AG Regional Sales Manager, said:“AG was able to provide better quality and a keener price on the products used. Furthermore, our team was also able to deliver both the experience and project know-how required to ensure the client received best value for money on the overall project.”

The historic Bell Street Stables in Glasgow has recently undergone an extensive conversion, featuring the installation of Alumasc’s Flushjoint aluminium rainwater downpipe system.This magnificent period property has an interesting history. It was built between 1896-98 by A. W. Wheatley, originally to house horses working to pull the Glasgow City Council Cleansing Department’s refuse collection carts. In 1955, the building was redesigned to provide a separate entrance for the Police Department who shared the property with Cleansing until the 1980s. Situated in a prime position within the Merchant City area in the city centre of Glasgow, the building was converted to form 52 mid-market affordable rented flats by the Construction and Manufacturing Group (CCG) on behalf of Glasgow Housing Association (GHA) and Lowther Homes, during a two-year construction programme. The renovation was completed in 2019.A major requirement of the renovation was to conserve as much of the building’s heritage as possible, which included all exterior aspects. This involved the upgrade of the stone elevation, replacing all windows and making repairs to the roof and rainwater system.Flushjoint aluminium downpipes along with contemporary hopper heads were specified for their contemporary design. The installation was completed in a non-standard RAL colour to match and complement the window surrounds. 

Emrys Architects were appointed by Berners & Wells to design this mixed-use development located north of Oxford Street in central London. The building sits across 2 different streets, the lower two floors accommodate flexible retail and restaurant space and the upper floors high end office space.The building has been designed to respond to the historic Character of the local area, some areas were partially demolished while the Edwardian facade on Wells Street was retained, repaired and extended. Portland stone and teal glazed-brick detail was used to create seven two-storey high arches showcasing the grand entrances to the offices and retail units.The ironmongery brief centred around replicating the arches present in both the external entrances and the courtyard, this distinctive shape was also used in the vision panels on a number of internal doors. To fulfil this brief, we worked closely with the architect to design and manufacture bespoke arched push plates in Flat Matt Black(FMB). Where required these were paired with complimentary D-shaped pull handles and simple accessories finished to match. All other ironmongery was finished in FMB including hinges, door closers, signage and accessories.Photography: Neil Kenyon

Designed by AHR Architects, the new UK Hydrographic Office in Taunton has won numerous awards including the BCO National Awards Corporate Workplace Award and Best of the Best Award 2020 and a Regional RIBA Award, RIBA Sustainability Award and RIBA Client of the year 2019.The United Kingdom Hydrographic Office is the UK’s agency for providing hydrographic and marine geospatial data to mariners and maritime organisations across the world. The UKHO is a trading fund of the Ministry of Defence and is located in Taunton, Somerset with a workforce of approximately 900 staff.We worked with the Architects, Client and Contractors to select one of our exclusive GeoBrick range for this prestigious project. The clean sleek lines and hardwearing stone finish provide a stunning façade to this landmark building. The warm texture of the brick also gives depth and character and softens the mass of the building.“The design principles of the building called for a linear brick which was modern and unique whilst complimenting the landscape and a variety of existing brick buildings surrounding the new HQ. The EH Smith Geobrick brindle bricks stood out from all the rest and we are delighted with the results. Personally, this is my favourite material used on this project!”- Johanna Funnell New Build Project Manager - UKHO

As the UK’s leading organisation for advanced materials research and innovation, the Henry Royce Institute plays a pivotal role in the country’s ambitions to develop groundbreaking materials and technologies, while fostering in parallel sustainable growth and development. Its purpose is to provide industry large and small as well as academia with the capability to develop, make, test and characterise innovative products, components and systems. To this effect, it provides easy access to state-of-the-art equipment worth more than £150m (175m euros) and to a highly trained support team. The Henry Royce Institute, known to many simply as ‘Royce’, operates from its brand new building at the University of Manchester and works in close coordination with eight additional, leading institutions across the UK – the Universities of Cambridge, Leeds, Liverpool, Oxford and Sheffield, the Imperial College London, the National Nuclear Laboratory and UKAEA (UK Atomic Energy Authority) – as well as Associate Partner, the University of Cranfield. All in all, Royce coordinates over £300m (350m Euros) of facilities, making it one of the global leaders in material science: it was at the University of Manchester, just a stone’s throw away from the new Hub, that graphene – a game-changing, carbon based supermaterial 200 times stronger than steel – was discovered for the first time.

The Old War Office is a magnificent refurbishment of Winston Churchill's headquarters during the World War II. The sensitive restoration of this Grade 2 historic building includes a 125-room world class Raffles Hotel and 85 luxury residences, along with restaurants, exclusive bars, a Spa and Wellness centre. Referred to as London’s anticipated destination, this architectural landmark opens its doors to the public in Summer 2023.RYNO’s involvement in the scheme included providing the paving and substructure to the Centre triangle Courtyard and the Penthouse Roof Terraces. The triangle Courtyard was finished with a RYNO Quadro porcelain range and supported on our TerraSmart Rail system. The system uses a double lattice structure to provide superior support to the pavers even around the complex curves of the planters on the courtyard and penthouse terraces. The design and detailing of the build-ups from concept to completion has been brilliant, fully complementing the building’s magnificent heritage and unique character.RYNO worked very closely with The Gardenists to ensure the rail layout and build-ups were designed to absolute perfection. Seeing is believing and as Calvin Dalrymple, Specification Manager at RYNO, testifies “to come to the site and see the results…, they really just speak for themselves. Knowing and understanding the coordination that's gone into this whole project and now to see it looking so fantastic has really been a huge reward.” Home to Winston Churchill and David Lloyd George, the Old War Office was designed in a trapezium shape to maximise the use of the land in Whitehall. Of the 25 million bricks that make up the building, the first was laid in 1901: the building was completed in 1906. For all Bond-fans out there, the building has featured in the background of many films: its first Bond-appearance was in 1983.

THE PROJECTThe M3 Hackwood Road Bridge is located near Basingstoke on the M3 motorway. It required extensive concrete repair over large areas, due to water ingress causing the corrosion of the steel reinforcement through carbonation and chloride attack. The repairs were undertaken as part of the Scheme Delivery Framework (SDF) for National Highways. Continuity and half-cell tests carried out revealed weak areas within the bridge’s rebar.THE SOLUTIONSacrificial anodes were installed to the perimeter of all repair areas prior to Renderoc DS being used to spray back replacement material. Renderoc was selected as the best product solution due to its low rebound performance, which is well-known and tested in the market, having been used in many similar applications. Renderoc DS is fully compatible with all anode systems due to its low resistivity. This is true for a majority of the Renderoc range, meaning it can be use alongside cathodic protection. Renderoc HB45 hand applied mortar was also used where access was limited. Each phase of the repairs lasted approximately 2 weeks, involving breakout, continuity tests, anode installation, area preparation, spraying, and a 3 day curing period before moving onto the next section.THE BENEFITSThe corrosion and potential spalling of the existing concrete meant that there was a risk to health and safety of the bridge. If left unrepaired this could have also affected the capacity of the asset on a major UK motorway. The application process for each section of the repairs was significantly faster due to the spray application method and ensured a comprehensive restoration of the entire structure. Volker Laser completed all works on time and to program.

An historic landmark in the Lake District has been given a new lease of life with the installation of StoTherm Mineral K external wall insulation and StoSilco finishing render. Built in 1937, the building in Keswick originally housed the UK’s first pencil factory, and now provides new headquarters and site for the Keswick Convention for the Keswick Ministries organization. After being used by the Cumberland Pencil Company the building had fallen into disrepair. Set at the entrance to Keswick, this important local landmark has now embarked on a £10.5m redevelopment project, split into four phases. The Sto materials have been used on the first phase which has seen the building’s front elevation fully restored, and they have also been specified for the remaining three stages of the work.The BBA-certified StoTherm Mineral K system combines impressive insulation with unrivalled fire protection characteristics. It features Sto-Mineral Fibre thermal insulation boards, which in this case were fixed to the substrate using StoLevell Duo Plus mineral bonding and reinforcing mortar.  “This allows any unevenness in the surface of the substrate to be accommodated and makes installation a fast and easy process,” comments Alan Rees of Eco Rend North East who installed the Sto system. This efficient single-leaf construction allows for excellent thermal performance without reducing the interior space, and as it requires no additional expansion joints, a smooth and unbroken exterior surface can be created.  An additional mineralic reinforcing coat was applied and the exterior surface was finished with StoSilco silicone resin render.  With high CO2 and water-vapour permeability, StoSilco render allows a weather- and water-repellant outer surface to be created in any of the 1,000+ colours available in the StoColor System.  

Project OverviewIsolgomma products played a key role in the sophisticated renovation of Koningslaan 32, an elegant historic villa overlooking Amsterdam's beloved Vondelpark. The project aimed to restore the property's grandeur while creating four luxurious 400-500 sqm apartments spread across two levels. Isolgomma’s expertise ensured acoustic comfort remained a priority amidst the transformation.ChallengeThe renovation presented a unique acoustic challenge. The existing wooden floors, while maintaining their historic charm, posed limitations in sound insulation due to their variability in structure and lower mass. This could potentially disrupt the tranquillity desired in these luxury apartments.SolutionThrough collaboration with an acoustic project consultant, with the manufacturer they devised a bespoke solution to achieve optimal sound insulation. This combined approach incorporated:Plasterboard Ceilings with Fibrous Insulation: This installation effectively reduced airborne noise transmission within the apartments.Upgrei Underlayment: Installed beneath the screed flooring, Upgrei provided superior impact sound insulation, addressing the specific concerns related to the existing wooden floors.ResultThe combined solution successfully addressed both airborne and impact noise concerns. The adaptability of the chosen methods ensured compatibility with the historic structure's variability, preserving the building's heritage while achieving the desired level of acoustic comfort for the future residents.Balancing Modern Needs with Historic CharmThis project exemplifies our products ability to deliver innovative solutions for complex renovations. We understand the importance of preserving a building's character while ensuring modern comforts like superior soundproofing. Contact Buildtec Acoustics today to discuss your unique renovation project requirements.

Rockfon® Lamella has been awarded Product Innovation of the Year in the Furniture, Fixtures and Equipment category of the FIS Innovation Awards 2023. The modular wall system provides Class A sound absorption for commercial projects and boasts a unique range of wood veneers in different colours and dimensions, allowing for an impressive 650,000 design combinations.Nigel Watkins, Commercial Sales Director for Rockfon, expressed his excitement about the recognition, saying, "We are thrilled that Rockfon Lamella has won this award only a few weeks after its launch." Rockfon Lamella's development was based on effective collaboration, knowledge transfer, and partnership along the project team, satisfying two initial criteria for Rockfon innovation: modularity and customisability, and occupiers' well-being through the use of colour, biophilic-inspired design, and natural surfaces.Combining the warmth and beauty of wood with a stone wool sound-absorbent panel, Rockfon Lamella creates a serene and inviting environment inspired by the biophilic design trend. Customers have expressed their satisfaction with the combination of these elements, with Nigel Watkins sharing that "The feedback we’ve had from customers is that the combination of a stone wool sound absorbent panel with biophilic wood makes interiors feel calm and connected to nature."Joe Cilia , Technical Director of FIS who was one of the Innovation Award judges, was impressed that Rockfon Lamella has such comprehensive test data, covering the whole system, not just individual components. “The furniture, fixtures and equipment (FFE) sector suffers from a lack of standardised testing and compliance for acoustic and fire performance, leading to clients choosing products that don’t perform as well as they should. The judges were impressed that Rockfon Lamella has clear, transparent test data that shows how the whole system performs.”Rockfon Lamella sets itself apart from other acoustic fixtures and fittings by offering exceptional fire performance classification of c-S2,d0, in line with EN 13501 standards, and Class A sound absorption that adheres to ISO 11654 regulations. Additionally, accessing all the necessary specification data, BIM Objects, and CAD drawings on NBS Chorus, NBS Source, and pCON is quick and easy, making the specification process quick and effortless.Rockfon Lamella simplifies installation by providing a complete kit that includes all necessary components. In-house facilities teams can easily follow the straightforward installation process, thanks to specially designed mounting clips. As Teemu Rekonen, Head of Design & Innovation at Rockfon, highlights: "This advanced product... enables individual placement of the slats to create the perfect acoustic environment. Once the platform is in place, installing Lamella slats is a quick and hassle-free process that requires no tools".Visit www.soundsbeautiful.com/lamella  for more information on Rockfon Lamella.To view all the FIS Innovation Award winners visit www.thefis.org/membership-hub/fis-awards/innovation/

In the new Ceramic Tile Distributors (CTD) showroom in Woking, Surrey, tile products by Saint-Gobain Weber have been specified for their new 400m² sales facility which includes an extensive showroom and trade counter.Relocation of Ceramic Tile Distributors (CTD) from their original showroom on the junction of Goldsmith Road and Church Street West to Kestrel Road a few miles away was brought about by the £150m redevelopment of Woking town centre."The relocation of CTD has not presented a problem," says Rob Stevens, manager, CTD Woking. "The showroom looks brilliant – it's bigger and better, and our trade custom has definitely increased. We also attract lots of private customers who enjoy the simplicity of the large sample displays and the huge variety of tiles for every location."Several site visits were made by Weber's tile specialists to inspect the floor substrate and identify the appropriate materials. The floor was prepared with weber PR360, a multi-purpose priming solution suitable for most building substrates including wood, anhydrite, plaster and cement/sand screed. This primer regulates the porosity of the substrate and improves adhesion and the flow of levelling compounds.High performance, fibre-modified weberfloor flex was then applied which is a self-smoothing and self-levelling compound suitable for most substrates. It has rapid setting qualities and can take light foot traffic after just 3 hours. It is also one of the many products in the Saint-Gobain Weber range to feature Low Dust Technology™ which makes it cleaner and more comfortable for the applicator to use.Large format GEMINI Young Stone tiles in grey were set with weberset rapid plus ECO which is a very rapid strength tile adhesive for low porosity tiles, such as ceramic, porcelain and natural stone, and has been specifically developed to allow easy bedding of large format tiles. It is suitable for use on solid substrates and is ready for grout in only 2 hours. The new ECO formulation contains cement replacement technology which reduces the product's environmental impact of initial excavation and contributes to a significant reduction in transportation costs.The CTD Woking showroom floor was grouted with weberjoint wide which is suitable for very wide joints from 2-20mm. This is a cement-based floor and wall grout which gives a coarse textured finish. It has the added benefit of Mould Stop Technology which ensures lasting protection from mould growth, it's also abrasive-resistant and available in seven colours.As part of Woking's redevelopment, the bandstand, fire station and market place will all be demolished to make way for a new complex featuring shops, apartments, parking and a hotel. On the old CTD site a brand new state-of-the-art fire station is to be developed providing additional space and working areas for the crews and an improved training facility.

Halamar acquired this site in Beaconsfield. Planning permission was granted for a new build two-storey detached dwelling, replacing the existing residential property constructed in the 1900s.A comprehensive set of architecture plans specified high quality elevations with a ‘classical’ Georgian-esque design. The sub-contractors, B-Bespoke Design & Build Ltd, required Keystone’s brick slip flat gauge headers above multi-pane sash windows and an intelligent bespoke interconnecting brick slip splayed bay system across two floors on the side elevation.ChallengeThe design and scale of the building, along with the arrangement of fenestration and opening detailing, required the careful skill and use of sympathetic materials to ensure the development enhanced the special character of properties in close vicinity.B-Bespoke Design & Build Ltd considered the volume of decorative window openings and availability of local skilled bricklayers when considering the most effective and efficient approach to the build schedule.SolutionAn offsite construction method was deployed by the sub-contractor. Keystone’s technical team were contacted to design brick slip flat gauge headers accommodating brick spans between 1135mm to 1472mm. Each with a 70-degree end skew, 375mm high face brick and 102mm soffit return whilst also incorporating keystone stone headers above specific windows. The prefabricated lintels improved the allocation of time and resources elsewhere on site allowing the build to be completed to a high interior specification still with an exterior full of character.The rigid symmetrical design and gracious classic proportions create a generous sense of space and natural light, with stunning traditional period features created above each window opening. The interconnecting brick slip splayed bay system spans 1695mm and provides a stark contrast to the boxy room profiles often seen with a Georgian home. This architectural feature accommodates the high ceilings and desired aesthetics whilst providing effective structural support to withstand roof and masonry loads above.A consignment of bricks was collected from site and each brick cut and bonded using a BBA approved construction adhesive to the load bearing lintels offsite. The patented perforated lintel design allows the adhesive to squeeze through the perforations and form a ‘mushroom’ on the inside, providing a mechanical lock between the steel lintel and the brick slips.Testimonial“For the new build Georgian styled home, we sourced over thirty bespoke prefabricated brick slip feature lintels from Keystone as well as a unique interconnecting feature brick splayed bay system. As a smaller building contractor, we saved time and money using Keystone Lintels. We did not need to source additional skilled labour on site to create and replicate the intricate brick detailing which included Keystone stone headers. Ultimately this resulted in a faster build schedule for the client.”Nirmal DhaliwalSite Manager at B-Bespoke Design & Build Ltd

Middlewood Locks is a prestigious 25-acre mixed-use regeneration scheme of Salford’s canal district. The first development phase included the construction of Quarry, an eight-storey building combining ground floor commercial space, luxury apartments and an undercroft car park for residents. It was the insulation for this car park that threw up a challenge for sub-contractor Horbury Building Systems. A complex underdrawing method had been specified, comprising the installation of timber battens, non-combustible mineral wool insulation and a separate soffit insulation over the top. Installation would be extremely labour-intensive, so Horbury Building Systems consulted Knauf Insulation about whether it could provide an alternative that would meet the thermal performance and fire safety requirements, but also be easy to install. Knauf Insulation’s Technical Support Team reviewed the specification and recommended 185mm Rocksilk® Soffit Linerboard Extra to achieve the required 0.18 W/m2K U-value.  Rocksilk® Soffit Linerboard Extra is a Rock Mineral Wool insulation slab bonded to a 6mm off-white weather resistant facing board which provides a two-in-one aesthetic and thermal solution. It has a low thermal conductivity of just 0.034 W/mK and is designed for use as an insulated underlining solution in semi-exposed environments. The off-white cementitious particle board reflects light which makes it ideally suited for use in car parks. As well as thermal performance, Rocksilk® Soffit Linerboard Extra is non-combustible. It has the best possible Euroclass A1 reaction to fire classification, so it will not contribute to the development or spread of a fire should it occur. This is important because car parks can contain large quantities of a potential propellant – petrol. So the insulation will help to ensure the fire safety of the rest of the building.   Rocksilk® Soffit Linerboard Extra also has good sound absorption characteristics so it provides high levels of sound reduction. This reduces noise from the car park, minimising disruption for the people living and working in the premises above. As well as meeting the specification, Rocksilk® Soffit Linerboard Extra has been enhanced to add rigidity and is easy to install. The board is simply placed onto the concrete soffit and fixed into position with five drillscrews. This reduced the installation method from three separate phases to just one, saving Horbury Building Systems time and associated labour costs. Stephen Hampshire, Contracts Manager at Horbury Building Systems said: “We found the panels easy to install. Firstly, we marked and drilled the fixing points at bench level. Next, we held the panels in place to the underside of the concrete – although the panels are lightweight ‘this is a two-handed operation’ – then we drilled through and fixed.”  “We took care in lining the panels together when installing it against the soffit and with some minor tweaking up and down we got a nice flush finish.” Being able to align the panels exactly is not only important for ensuring a good finish. It also means that the slabs will butt tightly together, reducing unintended air gaps which can reduce thermal, fire safety and acoustic performance.  The insulation was supplied to the Middlewood Locks construction site by distributor Galaxy Insulation.  Thanks to Knauf Insulation’s Rocksilk® Soffit Linerboard Extra, the underlining of the car park at Middlewood Locks was easy to install, is aesthetically pleasing, and provides complete thermal, fire safety and acoustic performance.

Britannia Leisure Centre is a new multi-sport community complex in Hackney. A key driver for the client was that the building should have a compact footprint. This was achieved by stacking the facilities, creating a rooftop MUGA with tennis courts and 5-a-side football pitches.Lang+Fulton supplied the external grating panels which crown the building and offer panoramic views of London. These were made from their Terra-34 grating which features an anti-climb aperture. The narrow panels were designed to continue the architectural theme of the building’s columns and vertical elements and were finished in a graphite grey ppc to compliment the neutral palette of stone, concrete and glass.In addition a grating screen was supplied to secure the upper levels of the stairway providing natural daylight and through visibility to the entrance atrium and cafe area.The steel grating also conformed to the requirement for material durability and low maintenance which were key specification considerations.Philip Glanville, Mayor of Hackney has written, 'I am so proud that we have delivered one of London’s best leisure centres, with absolutely incredible facilities that are affordable for people to enjoy'.The Britannia Leisure Centre has received multiple awards including Overall Building of the Year (New London Architecture).

The owner of this house wanted to build a purpose-built home to meet the needs of his growing up family. He wanted to live in the village he grew up in but at the same time it was important that the design embraced new concepts and ideas. The end result is a stunning contemporary luxury home that incorporates large glazing areas throughout. There has been a careful use of traditional stone, wood and also unique metal cladding detail with the external design. Internally the feeling throughout is minimalistic clean lines, with the furniture being a perfect complement to the end result.  With the exception of the switchable privacy glass for the window adjacent to the front door, the inclusion of completely concealed fully automated blinds to all other windows are the ’Grand Finale’ to this beautiful home. When not required the blinds are completely concealed but at the press of a button or using their mobile devices, blinds appear as required – providing shading, sun protection, privacy or blackout blinds as required.  A feature of interest is the large gable window in the master bedroom. Here Honeycell Duette® blinds have also been concealed within the sloping ceiling and again appear from their hiding places when required showing that irregular shaped areas can benefit from the Blindspace headboxes which can be made to conceal almost any blind available on the market.