"non relocatable partitions"

Located in Tower Hamlets, Gayton House and Sleaford House are managed by housing association Poplar HARCA. Following amendments to Building Regulations, which banned the use of combustible materials in external walls of high-rise buildings above 18m, StoTherm Mineral K was specified to replace the existing EWI system.BBA-certified, StoTherm Mineral K comprises mineral fibre insulation boards and the system is classified with an A2-s1, d0 reaction to fire in accordance with BS EN 13501-1.Working on behalf of Westminster Building Company, Square 1 Architectural Solutions was responsible for removing the existing EWI and installing the StoTherm Mineral K system onto four elevations on each 23-storey block. The non-combustible mineral fibre insulation boards were secured to the existing concrete substrate using adhesive and mechanical fixings, and without the need for additional expansion joints.A StoLevell Duo Plus reinforcing coat embedded with Sto-Glass Fibre Mesh was then applied to the face of the insulation boards. This was followed by the application of 1.5mm stippled StoSilco, a silicone resin render that provides high levels of water repellence to protect the walls from weathering.

University Coventry Hospital is situated in the Walsgrave on Sowe area of Coventry and is part of the University Hospitals Coventry and Warwickshire NHS Trust. The hospital opened in 2006, replacing Walsgrave Hospital the original hospital at the site.Twinfix was approached by Principal Contractors William Gough to design, manufacture and install a walkway from the helipad on the first-floor deck to the hospital’s Accident and Emergency department. The requirement was for a robust walkway that was structurally sufficient to withstand the usual weather forces and the down draught from a helicopter in close proximity.Liaising closely with William Gough and designer Pinnegar Hayward Design, the expert team at Twinfix designed, manufactured and installed a 240 sqm free-standing mono-pitch canopy with vertical perforated side panels. This impressive canopy design included lockable double leaf gates to secure the area.The roof comprises of our Multi-Link-Panel Non-Fragile (NF) system powder coated to RAL 5010 – gentian blue and glazed with 16mm multiwall polycarbonate, and the vertical panels were powder-coated to RAL 7037 – dusty grey. As this metal does not rust in use, the walkway will keep its good looks throughout its long life.

Fifty5ive Queen Street, Salford is a new 18 storey, 220-unit residential building in the centre of Salford for local developer Salboy.It includes modern, high-quality 1-, 2- & 3-bedroom apartments and duplexes, amenities include private resident workspace, gymnasium, yoga studios, resident cinema room and a terrace garden. Domis Construction is the preferred construction partner for Salboy on this scheme. In early 2022 they approached Encon Insulation in Chorley looking for a more readily available alternative to the stone wool product already specified. URSA UK Ltd was chosen to fill the void and keep the scheme on track. We supplied over 4500m2 of 100mm URSAPAN BLACK - a unique glass mineral wool rainscreen cladding insulation slab; ·      Euroclass A1 fire rating (non-combustible).·      Thermal conductivity of 0.035 W/mK.·      BBA Certified. Kate Fox, Area Sales Manager for the Midlands stated, ‘Following the success of this initial partnership URSA are now the preferred supplier of rainscreen insulation and our products are currently being used on Anchorage Quay in Salford with others in the pipeline including Derwent Street in Salford’.     

Architect/Designer: PRPLocation: ManchesterProject Overview: 30 Brown Street is a four-storey brick office building originally built in 1985. The brief was to retain and refurbish the building to provide circa 50,000sqft of adaptable contemporary workspace. ServiceFull hardware scheduling & bespoke finishProject DetailsThis exciting design in the heart of Manchester steers away from using traditional finishes such as stainless steel or brass and instead incorporates a bold use of white RAL9010 PPC ironmongery. Architect David Sharpe explains why‘The building has a lot of exposed raw finishes, including concrete soffits and grey terrazzo flooring, partly inspiring the name, CORE (also referring to the location in the heart of Manchester's office core). Doors and main structural elements were painted a very dark grey to provide a clear contrast with the concrete structure. The inspiration behind the choice of white ironmongery was to provide a high quality counterpoint to the darker raw exposed concrete and painted finishes, and any small part metalwork - eg the lighting, brassware and glazed partition framing, were also specified to be white to match.The contemporary interior was a key ingredient for the brief and although we started with the concept of a mixture of grey and white ironmongery to work with the overall feel of the building during our close work with the architect this was pulled back to a predominantly white scheme with grey pull handles being used for fully glazed doors to create greater contrast and to fulfil the contemporary brief.The choice of specific ironmongery took into account the desire for a minimalist aesthetic, relating to the choices in lighting and brassware.’To find out more about this project visit www.prp-co.uk/project/30-brown-street.html

The Project Derby Manufacturing University Technical College (UTC) has received planning permission by Derby City Council. BAM Construct UK will build the £8 million centre which has been designed by Maber Architects.The UTC will have capacity for up to 600 young people aged 14 to 19. They will study core GCSE's, A levels and engineering qualifications enhanced by project-based learning, work placements, employer site visits and industry expert lectures. The Challenge Produce a system suitable for use in an open space.Open plan arrangement of Cubicles and Solid Surface Vanities located directly off the corridor.Ensure safety of the user and create an anti-bulling, completely visible space.Standard vanity frontages and sinks did not meet the brief, a bespoke wash station was required. The Solution We are proud to have worked alongside Bam Construction supplying and installing our Skyline Range on the Derby Manufacturing UTC Project.The Skyline Range is the perfect fit in open washroom spaces. With full height doors, pilasters and partitions providing complete privacy, elegance, and discretion for the user.Used within increasingly popular open washroom spaces, these full height cubicles are the perfectly solution in open spaces, unisex washrooms and gender-neutral facilities.The Skyline Range is available in three different specification options to meet both budget and durability requirements.SpecificationProduct Range: Skyline SGLDoors:12mm Compact SGL G059 Gris OragePilaster: Polyrey G003 Gris PerlePartition:Polyrey G003 Gris PerleIronmongery: Satin Anodised Aluminium

60-70 St Mary Axe is an office building designed by London-based architectural firm Foggo Associates with retail space on the ground floor. It is located in thearchitecturally ultra-modern financial district of the City of London in close proximity to the iconic 30 St Mary Axe, also known as "The Gherkin," whose facade was realized byLindner. Also, the new building is nicknamed: "The Can of Ham" in its semi-elliptical shape reminiscent of the packaging of English canned ham. The 360° view through the vaulted, all-glass façade offers a great view of the city of London. The BREEAM Excellent building offers 28,000 m² of office space, spread over 21 floors and designedto meet a wide variety of needs.Lindner Interiors contributed to the construction with interior fit-out products. These include the suspended ceilings for the "A" category office rooms on the 3rd, 9th and 12th floors, and the luminous ceilings at the reception and in all elevator anterooms.The Lindner fire grid ceiling system LMD-B 100 with linear grid arrangement was installed on two floors, while on the third floor, light strip modules were chosen instead.These complete the appearance of the iconic building in an impressive way. If required, LMD-B 100 partitions can be attached to the Lindner ceiling system so that the office space can be individually divided. With its radiant fire grids and trapezoidal ceiling tiles, the system is perfect for the sweeping silhouette of the 60-70 St Mary Axe building.Completed Works:F0 Metal ceilingLMD-B - Post cap ceilingsLuminous ceiling/luminous canopyLuminous ceilingsCertification systemBREEAM

PROJECT OVERVIEWWorking with BES, we have successfully completed a refurbishment of an existing space into new quality assurance (QA) laboratory for a pharmaceutical blue-chip client. The fundamental requirement was to deliver a purpose- designed laboratory, located at the heart of the client’s busy manufacturing site, to run robust microbiological analytical activities for the next 25 years.SCOPE OF WORKTo meet the project requirements, we utilised several products, including 100mm Mediline partitions, metal pan ceilings, walk-on ceilings and various types of doors. Our in-house team became involved at an early stage of the design process. Working closely with the main contractor and end-users, we were able to recommend different products which would benefit the client’s processes and flow of the building. One of the key solutions we offered was Norwood’s automatic hermetically sealing sliding door system with large vision panels. This specifically designed doors not only saved space but also provided users with an open feel of the facility. It is due to this project that Norwood became a member of the Automatic Door Suppliers Association – (ADSA). Not many companies hold an ADSA membership and being associated with ADSA promotes the highest standards in automatic doors and gives Norwood operatives the qualification for certifying their own automatic doors to BS 7036: 1988. We delivered a modern and energy efficient facility, compliant with Good Laboratory Practice (GLP) requirements, within a controlled budget. The laboratory was finished to the highest standards, with a great attention to detail throughout.This project demonstrates that by involving Norwood at the early design stages, we can add real value, advising on the most suitable solutions, tailored to the specific needs of our clients.

Tolson's Mill, Tamworth is a new £16 million development consisting of 51 canal side apartments and 10 town houses. Set within a five-storey textile factory, each apartment and house is set to retain the industrial character of the grade 2 listed Mill building. Leading the project development was Brookland Group with subcontractors V&D Interiors fitting out each of the living spaces. In designing the building, Crosby Granger Architects placed safety and comfort as the main priorities for product specification.Given the listed nature of the building, ensuring the materials used met and exceeded safety needs was critical. Likewise, ensuring acoustic performance would be key given the luxurious nature of the apartments and town houses.    For Calvin Challis, Commercial Manager at V&D Interiors, using Knauf products was the sensible thing to do. “The goals of the architect were to ensure a quality, soundproof interior which meant that the product specification met and exceeded this expectation. That’s where Knauf came in. Not only were they always there to help and ready to listen if we had any questions, but their product were also the right choice to achieve the goals specified by the architect.” Attaining this level of performance would be achieved using Knauf performance systems products including metal partitions, which not only offer speed advantages on site, but enhance fire protection as well.Meeting the acoustic needs of the brief, standard 12.5mm and 15mm Knauf Soundshield Plus were used on the walls and ceilings. Soundshield Plus provided enhanced acoustic performance and excellent fire resistance. Importantly, Soundshield Plus can give up to 54Db acoustic sound reduction when used as part of a Knauf system. Getting the perfect finish throughout was achieving by using a mixture of Knauf finishing products. This included jointing tape, intumescent and acoustic mastic for their fire and acoustic performance attributes, and Knauf Fill and Finish. The result was a high-quality finish on partition walls with necessary performance built in.Ensuring consistency throughout the interior, Knauf Ceilings were specified for their acoustic performance and peace of mind both ceiling and wall systems would complement each other. “From a specification point of view, it was critical we knew that all products used would achieve the performance required. This was the main point for the architects but for us on site, having all the product come from a single supplier made it easier to source the right materials and know they’d install and work together easily” Calvin recalls. While efficiencies were gained on site by using Knauf systems, one of the biggest advantages this approach offered was the peace of mind through warranties. Calvin explained why this was so important: “The Knauf System Performance Warranty meant everyone knew the products would perform as intended for the lifetime of the system, with guarantees in place in the unlikely event of something going wrong.” “Having that security in place was vital for all involved, it meant we could get the support we need for installation and the main contractors and client would be protected going forwards. Especially on a listed building project, you need to have that peace of mind in place.”For added reassurance, Calvin recalls how Knauf would provide onsite support in the form of inspections “Knauf were brilliant, if we needed any help or assistance, they were more than happy to help. They came to the site a few times, to inspect the installation and provide some guidance if we were unsure of something. This was particularly helpful when it came to checking the acoustic ratings. They were able to check the acoustic ratings and ensure that they met the requirements, and that the client was satisfied.” The apartments that form part of the luxury residential development at Tolson's Mills and Tamworth were completed in November of 2022, with the houses scheduled to be finished in June 2023.

Challenge: C-Probe's LoCem® +chase® anode mortar has been installed at the Omni Shopping Centre Car Park in Edinburgh, Scotland to 4 levels of underground car parking as part of a comprehensive corrosion management strategy. Overtime the popular car park had succumbed to structural damage and corrosion caused by the ingress of chlorides from de-icing salts from above.Solution: This system comprised of 42 ICCP zones and 7 additional monitoring zones forlevels protected using surface-applied corrosion inhibitors. In addition to this, some 6000 C-Puck galvanic anodes were used to protect newly repaired areas to 2 levels. All the anodes and monitoring could be controlled and data accessed remotely throughoutthe car park with AchillesICP and AchillesIES, helping to extend its service life for 100+ years.Outcome: This ESG compliant approach meant there was no need for demolition or extensive reconstruction using new materials, helping to reduce waste and harmful emissions. Reconstruction was also a near-impossible strategy due to underground facility and electric tram on land, meaning something non-invasive like cathodic protection was essentialto minimise social disruption. 

Tew Farmhouse and Barns, Oxfordshire was a conversion of a Grade II listed farmhouse into six luxury holiday lets.Working to the client's brief, the Architectural Designers at Charlie Luxton Design scoped out the design of the luxury accommodation to achieve a high-quality finish whilst retaining the idyllic barn-like character.The rooflights needed to align with the design concept externally, integrating seamlessly with the zinc roof, whilst contributing to the airy and light interior design. Neo Rooflights were selected for their frameless interior and edge-to-edge glazing technology to maximise the viewable space and flood the top floor rooms with natural daylight.The technical design team at The Rooflight Co helped to marry vision to solution by creating a bespoke baseplate that provided the level of detail required to ensure the rooflights work alongside the roof, not simply sit within in. The technical team also advised egress Neo Rooflights to provide a means of suitable fire escape access and ensure the buildings conformed with building regulations.The Neo Rooflight demonstrated its suitability to be used within the Grade II listed farmyard within the context of it originally being a historic non-domesticated building. The rooflights were not only practical within the design, but the appearance was in keeping with the aesthetics of the times.

ChallengeThe London Stadium (formerly Olympic Stadium) and home of Premier League football club West Ham United, required an insulation solution that would not only upgrade the thermal and acoustic performance of the HVAC and service pipe areas, but also one that could meet the overall environmental demands of the project.SolutionAfter a series of consultations with the main contractor, Knauf Insulation developed a bespoke, one product solution, which met all requirements and helped to reduce engineering costs and installation time.23,000m2 of Rocksilk® Soffit Linerboard Standard was installed in the different elevations of the stadium, from level two to the lower ground level of the West Stand.Manufactured with ECOSE® Technology, Rocksilk® Soffit Linerboard Standard is a laminate of a compression resistant, non-combustible Rock Mineral Wool slab with a variety of aesthetic finishes designed to provide a robust faced solution suitable for installation in semi-exposed environments such as stadiums like this.The project was completed before West Ham’s first competitive game at the London Stadium in August 2016."The insulation product knits together to prevent open joints, which helped us to maximise the thermal efficiency of the insulation."Kunal Vekaria, Project Manager at HLS Installations

The historic Bell Street Stables in Glasgow has recently undergone an extensive conversion, featuring the installation of Alumasc’s Flushjoint aluminium rainwater downpipe system.This magnificent period property has an interesting history. It was built between 1896-98 by A. W. Wheatley, originally to house horses working to pull the Glasgow City Council Cleansing Department’s refuse collection carts. In 1955, the building was redesigned to provide a separate entrance for the Police Department who shared the property with Cleansing until the 1980s. Situated in a prime position within the Merchant City area in the city centre of Glasgow, the building was converted to form 52 mid-market affordable rented flats by the Construction and Manufacturing Group (CCG) on behalf of Glasgow Housing Association (GHA) and Lowther Homes, during a two-year construction programme. The renovation was completed in 2019.A major requirement of the renovation was to conserve as much of the building’s heritage as possible, which included all exterior aspects. This involved the upgrade of the stone elevation, replacing all windows and making repairs to the roof and rainwater system.Flushjoint aluminium downpipes along with contemporary hopper heads were specified for their contemporary design. The installation was completed in a non-standard RAL colour to match and complement the window surrounds. 

Client: Royal Borough of Greenwich Council Architect: Frankham Consultancy Group Assembly & Performance:·        All constructions including APL Tritherm™ structural framing system and all as non-combustible assemblies·        Roof – 10,000 m² of APL Energi Twin-Skin: Profile 31/1000RR in stucco-embossed mill-finish aluminium on walk-on roof liner plus all associated flashings, gutters, fixings and sealants, U-value = 0.18 W/m².K·        Walls - 10,000 m² of APL Energi Twin-Skin: Profile AP45HR in RAL 9006 PVF2 aluminium on wall liner plus all associated flashings, fixings & sealants, U-value = 0.16 W/m².K Special Features:·        Client required a 40-year maintenance free material for the roof in the marine location·        Multiple consultants employed by the end client to ensure the construction exceed current building regulation due to the proximity to Grenfell·        APL clamp-end lap detail for the roof to allow for thermal expansion·        APL Firewall™ with 60 minute integrity and 60 minute insulation ™ construction due to boundary walls Building Location:·        London Borough of Greenwich

The ChallengeThe designer of an exhibition at Tate Modern in London wanted to build a series of stools and benches out of bricks, but instead of using ordinary, rectangular bricks they wanted to use something more unusual.The live, public exhibition, called Endless Book Club, would see reading enthusiasts from notable book clubs sit on the brick benches and stools while discussing their chosen books, in the Turbine Hall of the famous art gallery.The SolutionForterra’s Cradley Heath facility provided over 500 special shaped bricks to create more than 20 seats as part of the exhibition.Cradley Special Brick has provided millions of non-standard bricks for refurbishments of listed buildings, luxury newbuilds and one-off projects including schools and leisure centres. Forterra have made more than 7,000 different bespoke bricks over the years for clients across the UK and as far away as Saudi Arabia and Scandinavia.The BenefitsBook clubs from the Royal College of Art and the Institute of Psychoanalysis took part in the event, which was produced by Self Publish, Be Happy.Bruno Ceschel, Director of Self Publish, said, “The brick seats are visually very striking and we’re thrilled with the results.”

Hush Acoustics provided an acoustic control solution for the main exhibit at the SS Great Britain visitor attraction called ‘Brunel’s Mind’, in which visitors enter inside the head of Isambard Kingdom Brunel to see the world through his eyes.Working with Electrosonic, the technology experts ho were tasked with supplying and fitting most of the audio-visual equipment for the project, Hush Acoustics ensured any concerns around the reverberation times in this area could be effectively addressed. The solution came with Hush Wall Covering, a highly versatile product which is formed of unique non-woven high-density polyester to target mid-range frequency sound i.e. speech etc. Its used ensured that the audio presentation within this visitor feature would sound as it should.The Hush Wall Covering product used at the SS Great Britain is just 10mm thick so it utilises little space, which was perfect for the room. The product was developed as a direct result of extensive consultation with influential members of the education sector.Chris Hurst from Electrosonic was very pleased with the results of the wall covering and for our quick turnaround time, saying the product does “exactly what it says on the tin”.

High-rise riverside apartment building refurbishmentLocated on the banks of the River Thames, Ocean Wharf is a high-rise apartment building that can be subject to salt-water spray during high tide and windy days. Timber decking had previously been fitted on the balconies and had started to deteriorate, as well as being identified as a fire risk by the Fire Risk Assessor.A high-quality decking system was required to replace the existing balcony decking. The chosen solution needed to have a premium look and feel in line with the luxury standard of the development. Luxura, being A1 fire-rated and resistant to salt which could have affected other types of decking, was the ideal choice for this project.As the installer hadn’t installed non-combustible decking before, they required some on-site support from our team who were able to provide a toolbox talk and check ongoing progress. This resulted in a fantastic end result with the installation completed to a very high standard.“The material was completely new to us, so we were a bit hesitant at first. However, now that we have experienced it, we wouldn’t want to use anything else.” - Installer, Ocean Wharf

Project DetailProject: Jaguar Land Rover – GaydonLocation: Gaydon, UKProduct: TS.9205 Architectural door closersProject DescriptionThe Test centre for Jaguar Land Rover at Gaydon offers the latest and greatest modern testing facilities for the renowned Jaguar, Land Rover and Austin Martin cars.Building 522 Vehicle testing underwent an extension and refurbishment to house new state of the art computerised equipment and test rigs (nothing more than £6m each!) for testing the brand new vehicles that they are manufacturing for the future. Non less than the new F-Pace Jaguar and the new soft top Range Rover (model not disclose able) were two of the elite products that were surrounded in high efficiency offices and door closers.The TS 9205 architectural door closer was chosen for their new office fit out with in the testing centre and warehouse facility. The TS 9205 door closers were chosen because:High efficiency and ease of operation which matched the ethos of the products that were on the testing platforms.35 year guaranteeAre quick and easy to installMatching the aesthetic finish and design of Jaguar Land Rover corporate image

The team at Moorlands Lodge Care Home, situated in the Surrey South Downs are there to welcome you for a guided tour around the home and discuss your specific care needs.Moorlands Lodge Care Home sits in a beautiful rural location, surrounded by local places of interest including National Trust properties, gardens, and art galleries, and with excellent transport links to nearby Guildford and London. Only a stone’s throw from the bustling market towns of Haslemere and Farnham, Moorlands Lodge Care Home offers a warm and welcoming environment and the very best in residential care, nursing care and dementia care. With 97 rooms, residents can choose between one-bedroom, two-bedroom, and studio apartments, all with en-suite shower rooms and some with kitchenettes.The Una was used in this building. The Una is a timber leaf riser door system with a concealed metal frame. Provided as a full metal door set, made to size and delivered to site as a flat-packed kit prepared for all ironmongery. The wood door leaf comes with hinge cut-outs and can be primed for on-site finishing or pre-finished in our factory. Choose from non-fire rated or fire rated to E30 or E60.

A multiphase regeneration project consisting of well over 1,200 new homes, community facilities, and a central park with communal facilities and a soft-play area.The regeneration project started back in 2010, phase 2 saw run between January 2011 and April 2013, phase 3 finished at the end of 2017, phase 4 delivered new homes during the 2nd half of 2018, while the latest phases started in 2019 and complete in 2024.Greenside Landscapes were awarded the Hard & Soft Landscaping at Heathside & Lethbridge in Lewisham, for which we supplied our TerraSmart Rail Paving System to support the rectangular concrete pavers in the communal podium space.The system, which is fully non-combustible, it’s made up of super-strong, 100% recyclable aluminium joists, which overlap to create a lattice framework, offering the maximum possible level of support, especially suited to high trafficked areas.The paving system featured a build-up of approximately 300mm and was perfectly integrated into the soft landscaping and soft play areas. Another example of a similar system deployment, in which we worked again with Greenside Landscapes, was the IKEA Hammersmith roof-terrace project.

Oval Village in Lambeth is a project that comprises affordable residential apartments, with office and commercial space, retail and leisure facilities, and parking.The site is part of a large-scale redevelopment of the former Oval Gasworks site, offering 598 apartments with balconies and terraces for which we designed and developed the paving support system.The balconies used the TerraSmart Pedestal Paving System, which is straightforward to install, powerful and fully non-combustible, with the paving laid safely on our RP-FR, millimetre-perfect adjustable paving support pedestals, with edge spring clips around the edges to ensure uniform spacing for an aesthetically perfect finish.The terraces, with a commanding view of the city at the top of the building, feature a hybrid system starting with the TerraSmart Rail Paving System – super-strong thanks to its overlapping lattice framework – to form the ramps, which transition seamlessly into the TerraSmart Pedestal Paving System for the rest of the area.Throughout the project, we worked closely with Formation Architects, HTA Architects, Building Control, NHBC and Berkeley Group to design the most relevant systems for the project. Fenland Flat Roofing installed the systems for the balconies, while those for the terraces were installed by NAO Landscapes.

baseTherm® PROJECT Contact your local team baseTherm® for these amazing floor insulation results:📞+353 (0) 87 333 0683📞+353 (0) 87 223 2456📩 sales@basetherm.com📲basetherm.comClick here to view more finished jobs on our GALLERY:https://lnkd.in/e9zh-nwxbaseTherm® is an NSAI Agrément certified BEPS liquid floor insulation, complete with its own EPD.It's produced and installed on-site by our local team using our Mobile Floor Insulation Factory - without waste or fuss.💡baseTherm® KEY BENEFITS:👉 Seamless, void-free poured floor insulation👉 Factory-produced on-site, without waste - using our Mobile Floor Insulation Factory👉 Rapid pumped installation👉 Non-combustible👉 Ultra-lightweight with acoustic benefits👉 Highly insulating, from 0.041 W/mK👉 National Standards Authority of Ireland (NSAI) Agrément certified👉 EPD Certified – available to download on Irish Green Building Council's platform EPD Ireland👉 Available for spec on NBS Source and as BIM Digital Objects

Optima FC in 3.0mm PPC Aluminium 1050 grade has been used in the completion on The Power Electronics, Machines and Control (PEMC) Research Group on Nottingham University's Jubilee Campus.Home to three purpose-built labs – High Power, Power Electronics, and Drives – the building was built after PEMC secured investment of £18million, including £1.5m from the Wolfson Foundation and £4m from Propulsion Futures.The 5,400m² development is internationally renowned and one of the largest on its field.FEA analysis was carried out by Sotech as non-standard sheets were used due to the sheer size of some panels. The purpose was to ensure enough stiffening resistance had been built into the sheets, to ensure the larger panels were safe and compliant.The project was completed during the first lockdown (due to Covid 19) meaning operations were paused during the project. Sotech and Deane Roofing worked closely together to keep as tightly as possible to the original timeline.Josh Stevens, Estimator at Sotech said: “This was my first project working with Deane Roofing, which was an absolute pleasure. The project ran smoothly from start to finish, and I think the end product looks fantastic.”

Following the devastating effects of the Grenfell Tower tragedy, Hatfield Close & Gerrard House fell into the category of social housing buildings that needed to be reclad to meet safety standards and Terracotta cladding offered a solution that satisfied the required standards and ticked all the boxes. BackgroundOn the 14 June 2017, a disaster that shook the nation taking away the lives of 72 people, injuring many others and devastating families and a whole community became the core of public unrest and resulted in a mass scale enquiry that identified around 2,000 buildings over 18m tall clad in dangerous combustible materials in England alone. The cladding crisis exposed that not only did the buildings pose an immediate fire risk to residents but also saw flat owners facing building insurance premiums, extensive and costly remedial work and mortgage lenders deeming the properties unsafe and ceasing to lend money against them. The Grenfell tower tragedy resulted in the review of the building regulations nationally and internationally in countries including Australia, Malta and The United Arab Emirates and in a government pledge of over £5bn towards the remediation of fire safety problems in high rise buildings. The three Hatfield Close & Gerrard House blocks were identified as being clad with ACM, the cladding material used at Grenfell. The projectAlthough originally constructed as a concrete frame with brick infill sections, the Hatfield Close & Gerrard House buildings experienced weather penetration issues during the 1980s and the 1990s that led to a programme of improvements which included the introduction of an ACM rainscreen system in the 2000s which during the post Grenfell tall buildings cladding mass review was found unsafe. Only weeks later emergency works to strip the hazardous cladding began.  Although the primary objective of the project was to improve the fire safety performance of the three blocks, the project team took the opportunity to redevelop the buildings to also improve their aesthetic and structural and thermal properties. The nature of the project called for a holistic approach led by a multidisciplinary team which included Michael Dyson Associates Ltd, a housing consultancy firm that specialises in the social housing sector, social housing main contractor United Living, a Lewisham Homes & Fire risk manager, independent consultants and resident representatives. The team, with guidance from the planners selected terracotta cladding as the material of choice due to its non-combustible A1 fire rating and robustness. In addition to its essential non-combustible fire classification, terracotta offered a large range of tile colours, shapes, profiles and textures that gave the team design freedom and opened the possibility to improve the aesthetic appearance of the blocks at the same time as offering durability due to being a natural product with no synthetic dyes and a life expectancy of 60 years +. The terracotta cladding system offered the façade contractor Novo Facades a simple method that allowed them to deliver a clean and non intrusive installation process which was key as the residents were living in the buildings all along. The project became a construction referent of inclusion and savoir faire. It was a winner in the Inside Housing 2020 Resident Safety Campaign Awards, it was shortlisted for ‘Best Community Engagement’ and Won ‘Project of the Year £10 million to £25 million’ awards at the 2021 National Building & Construction Awards. SolutionTerracotta facade panels are one of the cladding resources of choice in the market because it is a natural and versatile material that gives architects freedom of expression whilst it gives cladding and envelope contractors the advantages of a quick and easy installation process. The Argeton system is one of the principal terracotta systems used worldwide not only because it is a natural and versatile material but also because it offers a technical and cost-effective solution for the residential, commercial and health and education sectors. Argeton is CE and UKCA marked and one of the most tested systems in the market including a BBA and an EPD. NHBC approved and not subject to any restrictions on building height or proximity to boundaries thanks to its Euro-class A1 Fire certification, it is no surprise Argeton is one of the materials of choice not only in new builds but also for refurbishment or re-clad. Durable and fully recyclable, ISO 14025 and EN 15804 (European BREEAM equivalent) certified, sustainability is at the heart of Argeton’s values. Argeton terracotta cladding systems are available in a range off the shelf and bespoke profiles, in lengths to suit and in natural, glazes, digital print and engobed finishes. https://tellingrainscreens.co.uk/profile-and-finishes/

Today’s students demand a high standard of living, and with 348 beds, separate study and social spaces, a dining room and gym, The Malthouse, new luxury apartments in Wilder Street, Bristol have been designed to provide it.Spread over five stories, the external envelope features a combination of different coloured brickwork and rainscreen cladding. AWW Architects had specified non-combustible insulation to meet the requirements of building regulations in England and Wales, which ban the use of combustible materials on the external walls of certain types of buildings over 18m.With this in mind, main contractors Watkin Jones contacted Knauf Insulation’s Technical Support Team to determine which insulation solution would be most suitable to achieve the required U-value of 0.19 W/m²K. They also wanted to determine whether the wall build-up would prevent cold bridging and act as a vapour barrier.The Technical Support Team undertook complex 3D U-value calculations and condensation analysis. 3D U-value calculations completed in line with BS EN 10211 are used for rainscreen projects because they are the most accurate way to ensure a building’s thermal performance matches the initial design. The Technical Support Team provided a fast turnaround on the enquiry and recommended 100mm Rocksilk® RainScreen Slab as the best solution for the project.Manufactured from Rock Mineral Wool, Rocksilk® RainScreen Slab is non-combustible with the best possible Euroclass A1 reaction to fire classification. This means it will not contribute to the development or spread of fire should it occur. As well as having a British Board of Agrément (BBA) certificate for high rise residential applications, it also has a BBA certificate for use behind masonry façades – making it suitable for the different applications on The Malthouse.In addition to fire safety and thermal performance, Rocksilk® RainScreen Slab offers excellent sound reduction characteristics.More than 8,000m2 of Rocksilk® RainScreen Slab insulation was supplied to the development by builders’ merchants M Markovitz Ltd.Like all Knauf Insulation products, Rocksilk® RainScreen Slab has been designed for ease of installation. Improved robustness means it is easy to manoeuvre into place and it can be installed either way round without compromising performance.Rocksilk® RainScreen Slab is manufactured with ECOSE® Technology, Knauf Insulation's unique bio-based binder that contains no added formaldehyde or phenol. Products made with ECOSE® Technology are soft to touch and easy to handle. They generate low levels of dust and VOCs and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort. ECOSE® Technology is also made from natural raw materials that are rapidly renewable and is 70% less energy-intensive to manufacture than traditional binders, so it is more environmentally friendly.Thanks to the technical support from Knauf Insulation, The Malthouse will deliver the students a comfortable, warm, quiet and safe environment where they can enjoy their university years.

Central M40, a 70 acre industrial estate situated off J11 of the M40 in Banbury, comprises six warehouses totalling over 1 million sq ft of accommodation – equivalent to roughly 17 football pitches. The estate was developed speculatively by db Symmetry*, who specified CA Group’s robust Twin-Therm® Built-up Roof and Wall systems.A key component of the Twin-Therm® building envelope system is Therma-Quilt, a bespoke high-performance Glass Mineral Wool insulation. It is manufactured by Knauf Insulation specifically for CA Group and is the result of a long standing partnership between the two companies.Therma-Quilt is ideally suited for non-residential cladding applications. It offers outstanding performance and functionality available in different thicknesses to support the Twin-Therm® system, delivering enhanced thermal U-values as low as 0.09W/m2K. It is non-combustible with a Euroclass A1 Reaction to Fire Classification, meaning it will not contribute to the development or the spread of a fire.Therma-Quilt is also a high-performing acoustic insulation. In Twin-Therm® roof applications, it helps reduce the drumming effect of rainwater, while in Twin-Therm® wall applications, it aids with sound reduction and can minimise the reverberation of internal sound when used in conjunction with perforated metal liner sheets. Therma-Quilt has been developed with water resistance in mind and uses materials that help prevent water ingress.The Twin-Therm® system has been designed with sustainability in mind and Therma-Quilt is no exception. Knauf Insulation’s Glass Mineral Wool products contain up to 80% recycled materials. This saves on virgin raw materials and energy demands, cuts carbon emissions, and reduces waste going to landfill.It is manufactured with ECOSE® Technology, Knauf Insulation's unique bio-based binder that contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable and is 70% less energy-intensive to manufacture than traditional binder, so it is more environmentally-friendly.Products made with ECOSE® Technology are soft to touch and easy to handle. They generate low levels of dust and VOCs and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort.In total, more than 70 tonnes of Therma-Quilt insulation were used on the six megasheds on the Central M40 development. While the industrial estate was built speculatively, its strategic location has previously attracted premium occupiers including Hellofresh, Prodrive Motorsport, TVS Supply Chain Solutions and Rinkit.Thanks to the Twin-Therm® system with its Therma-Quilt insulation, the warehouses have achieved BREEAM ‘Very Good’ ratings, while the businesses using them will enjoy more comfortable, warmer and safer working environments – and lower energy costs. *db Symmetry has rebranded as Tritax Symmetry

Factory International will transform the former Granada Studios into a world-class cultural and arts venue in the heart of Manchester. It features The Hall, a large auditorium, and The Warehouse, a flexible multi-purpose space that is taller than four double-decker buses, longer than a jumbo jet and can accommodate 5,000 visitors.Alongside the two public events spaces are The Towers, which house the ground floor entrance foyer, five floors of office space and a plant room at the top of the building. Noise reduces productivity by 66% so when it came to specifying the soffit insulation for The Towers, the architect wanted a solution that would limit airborne sound transfer and reverberation.The insulation would be on display, so aesthetics was also important, and because Factory International will cater for large crowds of people, the chosen solution needed to be non-combustible.Meeting the briefThe architects specified Knauf Insulation’s 50mm Heraklith® Tektalan A2 SmartTec for the soffit insulation in the ground floor foyer of the Warehouse area, main feature staircase, offices and plant room of The Towers.Heraklith® Tektalan A2 SmartTec is a cement-bonded wood wool panel combined with a rock mineral wool insulation core. Both materials have an open structure that naturally absorbs the kinetic energy of sound waves, turning them into heat. It is also non-combustible with an Euroclass A2-s1,d0 reaction to fire classification.Crucially, the Heraklith® wood wool range is also designed for applications where aesthetics is important because the panel is on display. It features bevelled edges and comes in nature tone as standard, or can be ordered in any RAL colour upon request, to create a stylish, uniform finish.To compliment the design schemes in the different zones across the building, contractors, Mansell Building Solutions, ordered the panels in a combination of midnight blue, pebble grey, anthracite and black.Scheduling deliveriesAs the Factory International site is quite compact, there was little room available for storage. So, Knauf Insulation worked closely with distributor Encon Insulation to ensure the insulation was held in stock. Smaller deliveries were then made in line with Mansell Building Solutions’s schedule of works. This ensured that the insulation could be installed as soon as it arrived on site.The product is quick and easy to install. Panels are fixed into position by installing Heraklith® DDS Plus Concrete Screws into each corner and the centre of the panel. The fastener heads have a patented wood wool texture to enhance the finished appearance.Ultimately, installing Heraklith® Tektalan A2 SmartTec onto the soffits in The Towers and the ground floor foyer of the Warehouse not only compliments the design scheme and contributes to fire safety, but it will enable the team behind the events at Factory International to enjoy a quieter working environment too. 

In the world of education, the physical environment plays a crucial role in shaping the learning experiences of students. To ensure that every child has equal access to education, the Department for Education (DfE) in the United Kingdom has laid down comprehensive guidelines for the design and construction of school buildings. Two key documents, BB103 and BB104, stand at the forefront of this initiative, setting standards to promote inclusivity and accessibility within educational settings.BB103 | Designing Accessible School BuildingsFor mainstream schools, BB103 mandates the inclusion of accessible facilities to accommodate pupils, students, staff, and visitors with disabilities. Crucially, this includes the provision of a specialist hygiene room equipped with either a fixed or mobile hoist, alongside ample space for assistants to facilitate the changing process.In primary schools, the hygiene room must span a minimum of 9m² and feature essentials such as a changing bed and accessible WC.Secondary schools, on the other hand, are required to allocate a minimum of 12m² for their hygiene rooms, which should additionally incorporate an accessible shower, sluice toilet, and changing trolley. These specifications are designed to ensure that hygiene rooms meet the unique needs of students across different age groups and educational settings.According to recent statistics from the DfE, approximately 14.1% of children in the UK have special educational needs, highlighting the critical importance of ensuring that school environments are inclusive and supportive.BB104 | Catering to Special Educational Needs and Disabilities (SEND)BB104 further refines the standards for hygiene rooms in special schools and alternative provisions (APs). For non-ambulant special schools or units, the guideline stipulates the provision of one hygiene room for every 12 non-ambulant pupil places. These rooms must be equipped with a fixed hoist, a changing bed, a wash hand basin, an accessible WC, and an accessible shower, underscoring the comprehensive support required for students with profound disabilities.In ambulant special schools and APs, one hygiene room per setting is mandated, featuring either a fixed or mobile hoist, a changing bed, a wash hand basin, and an accessible WC.Additionally, all hygiene rooms are required to have facilities for waste disposal, such as a sluice or equivalent, to maintain hygiene standards and ensure the efficient management of waste.Conclusion | Building for a Brighter FutureAs educators and stakeholders in the education sector, it is our collective responsibility to champion inclusivity and accessibility in every aspect of school design and construction. By understanding and implementing the guidelines outlined in BB103 and BB104, we pave the way for a brighter, more inclusive future where every child has the opportunity to thrive and succeed.How can we help? Our skilled team have many years’ experience of planning and installing equipment within public environments such as schools and universities. Please do get in touch if you need help or advice with your project or further support on the Government requirements for equipment that needs to be installed to support SEND students.

Over time bricks can discolour and lose their lustre because of the impact of wet weather, air pollution or efflorescence. The result can have a detrimental effect on a building’s visual aesthetic, compromising the architect’s design vision and reducing the value of the property for the owner. Brick manufacturer, Vandersanden is the first company to develop a viable, large scale coating solution to provide superior protection against efflorescence as well as secondary protection against the effects of pollution.Vandersanden’s automated coating formulation makes facing bricks water-repellent and resistant to the effects of air pollution and efflorescence, ensuring façades remain beautiful and untarnished throughout their lifetime. This innovative and environmentally sustainable process which also makes it easier to clean the brick, if dirt or damage does occur, has now been fully rolled out across the entire Vandersanden hand-formed brick range available to UK specifiers.Vandersanden worked with Belgian University, KU Leuven, to develop the solution which treats bricks with a special coating after the firing process. The process penetrates to a depth from 5mm to 15mm whilst retaining the original colour of the brick.The liquids contain no harmful substances or chemicals that can damage the brick or the environment and is automatically applied at Vandersanden’s manufacturing facilities in Belgium and The Netherlands.A coated brick has exactly the same pore structure as a non-coated brick and the number of pores and their size remain the same. However, as the walls of the pores are covered with a water-repellent layer, the water droplets are no longer attracted to the walls and will not be absorbed. As the pores remain open, the bricks also retain their resistance to frost.Applying the coating during the production process, eliminates the need to coat the bricks with an applicator once they have been installed, which is a highly specialised and expensive process. It also reduces the often laborious and costly task of prepping the facade for a coating and the regular maintenance required.“Creating beautiful facades that will stand the test of time remains crucial for Vandersanden,” says Jean-Pierre Wuytack, CEO at Vandersanden. "Thanks to our commitment to innovation in product design and manufacturing, we can ensure a lifetime of colour-safe brick performance for architects and their clients. We are proud of our coated solution which demonstrates how Vandersanden is the natural partner for architects who care passionately about creating the very best, most long-lasting aesthetic for their buildings.”Vandersanden coated bricks come with a 25-year guarantee and the company has worked hard to ensure these bricks can be delivered at the same cost as non-coated bricks.Vandersanden produces a vast array of high-quality bricks in different finishes and colours, ranging from reds and browns, to greys, creams and buffs that will inspire and enable the design and construction of beautiful buildings.To find out more, register for our RIBA approved CPD #2 "How to avoid brick stains and efflorescence" here CPD – Continuing Professional Development | Vandersanden

Wrexham General Station is a main line railway station and the main railway station serving Wrexham, north-east Wales. The station was first opened in 1846 and expanded in 1912. It comprises four operational platforms with two disused bay platforms at the southern end of Platform 1. Until the early 1980s what is now Platform 4 of Wrexham General, was a separate station: Wrexham Exchange.After working with MPH Construction on a number of station refurbishment projects across Wales, the Principal Contractor approached Twinfix to carry out the survey for the canopy refurbishment at Wrexham Station as well as designing, manufacturing and supplying the replacement roof glazing for 3 of the platform canopies at the station. The panels were installed by a third-party roofing company.The work spanned 532 square metres and comprised of the innovative Multi-Link-Panel Non-Fragile (NF) system glazed with 6mm Georgian wired polycarbonate.Each panel of the innovative Multi-Link-Panel NF system comprises of a powder-coated aluminium frame and fitted with polycarbonate glazing. The panels are built completely off-site in a quality-controlled factory environment, reducing the risk, and cost, of site mistakes, and are delivered on-site fully glazed and ready for rapid installation. The system has a unique linking design feature that results in incredibly quick installation times, making the system very much suited to rail work due to its restricted possession times.The Multi-Link-Panel NF system is an innovative roof glazing product that has been well utilised for many years on station canopy roofs, and it has been thoroughly tried and tested in that time.It was the chosen system for this project for a number of reasons:sustainability– these panels are virtually unbreakable in manufacture, transit and in situ, meaning that, unlike glass, maintenance costs will be eliminated.safety– Twinfix Multi-Link-Panel NF (Non-Fragile) conforms to the HSE recommended test method ACR[M]001:2019 (as outlined in document HSG33) and achieves a ‘B’ Classification.off-site construction– The panels are pre-assembled in Twinfix’s factory ensuring strict quality guidelines are adhered to, which is not always guaranteed when roofing products are assembled on site.ease of access– The Multi-Link-Panel NF system can be fitted with In-Line Access Hatches, to allow cleaning of gutters and roof. These hatches are hardly visible and allow safe access through the glazing without needing to get on the roof.weight– The Multi-Link-Panel NF is light in weight and due to its modular format, it is very quick to install which allows for short rail possession works.appearance – The Georgian wired polycarbonate glazing combines the appearance of Georgian wired glass with all the material benefits of polycarbonate. As well as improving the overall environment in a lighter, brighter station, the addition of the Twinfix Georgian wired polycarbonate at Wrexham General Station has preserved the building’s unique appearance and character, while providing modern levels of safety for passengers and staff.

About the projectIn the summer of 2016, Paterson Gordon Architecture were approached to renovate an existing steading that stood in a derelict state. However, the stunning views of Loch Lomond created an inspiring opportunity to design and build a modern family home.Which FAKRO products were used?This property required an increase of natural light for a dark space within the building which could not fulfil its highest potential. By specifying DMF-D U6 and DXF-D U6 flat roof windows, Paterson Gordon Architecture was able to deliver a substantial proportion of natural light into the central hallway. DMF - D U6 Manually-operated Flat Roof WindowManual opening flat roof windows.The type F window is equipped with an energy-efficient triple-glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC upstand is RAL 9010, the internal finish is RAL 9010 white PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.DXF-D U6 Non-opening Flat Roof WindowNon-opening flat roof window.The Type F Window is equipped with an energy-efficient triple glazed DU6 glazing unit.The external glass is 6mm toughened while the internal glass is laminated and anti-burglary P2A Class.Heat transmittance co-efficient for the whole window is U-Value 0.88W/m²K. (glass U-Value 0.5W/m²K).Acoustic rating 34Db (-1.-3).The multi-chamber UPVC Upstand is RAL9010, the internal finish is RAL9010 White PVC.The step and profiles are in black 9005, the glazing edge colour, called darkness, effect which comes from RAL 9005 (black) the coating has hue of grey.Can be used on roofs with pitches between 2-15°.The existing part of the barn specified conservation-style roof windows to suit the original roof openings. To meet this requirement, FAKRO conservation windows were specified and installed. The characteristic feature is a black vertical mullion bar down the middle of the window and its black cladding. Making it suitable for traditional construction. Most of FAKROs standard windows are available as a conservation window.Why were FAKRO products specified?Primarily, the appearance of the flat roof windows was behind the reason for choosing FAKRO, along with the diverse product range and the ability to install the windows onto zinc, slate, and single-ply membrane roofs.

BackgroundK Systems’ retrofit of the REEMA non-traditional construction Properties in Swindon, South-West England, is a stellar example of the company’s ability to harness years of expertise with forward-thinking innovation to meet the needs of its clients.Swindon Borough Council had a development of 50+ properties in Upper Stratton all with aged facades and poor thermal qualities, some with U-values as inadequate as1.59W/m ² K.K Systems supported Swindon Borough Council, led by Projects Surveyor John Black, to completely refurbish this residential development and deliver on five primary objectives:- Improve the thermal performance rating of each home (SAP rating)- Deliver greater thermal comfort for residents- Choose a solution with acoustic benefits and non-combustable benefits- Reduce tenants’ energy consumption- Deliver an attractive aesthetic that would uplift the areaHaving a good reputation for matching systems with finishes to deliver its clients’ visions, K Systems partnered with approved installer, Rateavon Ltd, to scope out theproject and specification in fine detail, with particular focus on insulating properties and aesthetic.Our ServiceK System worked in collaboration with Swindon Borough Council and Rateavon Ltd to upgrade these poorly insulated houses and deliver a total revamp of the properties, resulting in thermally efficient homes.One of the primary requirements was to improve the performance rating of each home, with a target U-value of 0.30W/m²K. In fact, K Systems exceeded that in the project delivery by achieving a U-value of 0.29W/m²K.The project was completed with minimal disruption to existing residents, and due to forward planning and regular site visits by an experienced K Systems project manager, where processes and progress were monitored and evaluated, the project was completed within the agreed timescale.Digital technology was deployed from the very beginning to produce models and CGIs (Computer Generated Imagery) to not only assure Swindon Council the finished project would meet its specific requirements, but to also guide the design process and ensure compliance with all health and safety regulations.Regular inspections and site audits were carried out alongside Swindon Council to ensure the same level of care and attention to detail that applied when specifying theproject was being applied during its implementation and delivery.Technical Project DetailsOn initial inspection, K Systems found a problematic substrate. The REEMA hollow panel non-traditional construction properties are constructed of a concrete frame with thin concrete panels to the exterior façade. This type of thin panel construction created a significant challenge for the team to find a suitable EWI fixing, but with the help from Rawlplug, one of our EWI fixings suppliers a robust and safe fixing solution was found, without compromising the existing REEMA construction.Harnessing years of EWI system design knowledge and unrivalled expertise in this field, K Systems worked closely with Rawlplug and a structural engineer to identify a suitable fixing detail and pattern which would not only be robust but also suitable for this type of substrate.With a structurally strong solution agreed, focus then turned to the appropriate insulation solution.After a comprehensive scoping process taking into consideration client requirements, project objectives, budgets and timeframes, K Systems specified the industry proven K Systems M, Mineral Wool EWI system to not only significantly boost thermal performance of the buildings but also reduce noise pollution for the tenants.K Systems 100mm Mineral Wool insulation has an industry-leading ability to generate exceptional thermal performance. That made it the perfect choice for the refurbishment as it would combat the increased heating costs faced by residents whilst retaining the solid foundations of the existing building and reducing the risk of condensation or mould damage.Other technical benefits which made the K Systems Mineral Wool system the ideal specification for this refurbishment include:- non-combustibility, A2-s1,d0 fire rated- its excellent acoustic properties, reducing noise pollution- its environmentally friendly composition as the insulation is free from gases with ODP (ozone depletion properties) or GWP (global warming potential)- its workability and easy to cut format, reducing labour time across the board for the team.Having identified solutions that improved structure and thermal performance, K Systems then offered the best quality finish for the properties – an aesthetically pleasing, cost effective combination of VBriQ+ clay brick slips and Silkolitt+ silicone render that both Swindon Council and the residents would be proud of.VBriQ+ is a lightweight, highly durable, clay brick slip system and a more cost-effective finish option in comparison to tradition brick systems without compromising on quality, weather resistance, workability and durability. This made it perfect for a project of this scale – a project which required maximum and long-lasting impact without incurring maximum costs.The Silkolitt+ silicone render finish rejuvenated the properties’ exteriors and massively enhanced the area’s overall aesthetic, making it a much more appealing place to set up home.Yet again going the extra mile for clients to ensure unrivalled workmanship and longevity, K Systems finished all 52 properties with K Pro - a water-based protective treatment used to provide long term enhanced water repellent properties to external render and other masonry surfaces, helping combat the problems associated with water intrusion including efflorescence, frost, water-soluble pollutants and algae growth meaning the substrate will stay clean and dry for longer.K Systems and approved installer Rateavon Ltd delivered an excellently designed and expertly executed refurbishment, that exceeded the expectations and requirements of the client, Swindon Council, and the residents of the newly improved homes.John Black, Projects Surveyor at Swindon Borough Council, said:“Throughout the project K Systems have supported Swindon Borough Council agreeing all detailing to ensure current day Building Control Regulations were met. They supported resolutions throughout the project lifecycle and were really reactive, visiting site and supporting when required. They carried out weekly detailed spot check reports with photographic evidence and also checked batch numbers of materials. They delivered a great service. A really successful project.”

For this refurbishment project, we installed a new DYNAMIK Sprung Engineered Premium Sport Oak Floor. includes the DYNAMIK bespoke court design by partners Sportserve, who created a basketball home team feel by highlighting the surrounds and court Ds as well as the DYNAMIK and Shire Oak Academy logos. Neal Critchley at Shire Oak Academy, had a few words to say the project: "It was a real pleasure working with DYNAMIK for the replacement of our gymnasium floor, from the early discussions, through design, installation to completion the DYNAMIK team were integral to how the project evolved and ultimately looks. We are delighted with the finished product and how it fits into the branding of our sports facilities." "Having considered a range of options for the replacement of our old gymnasium floor it was clear that the passion Craig and the DYNAMIK team had to help us meet our goals, which made them the perfect partner for us. The new wooden floor looks amazing!” The school also purchased DYNAMIK Giant Carpet Tile protection to preserve the Oak during non-sporting or community events “…The protective tiles are a perfect way for us to ensure it stays that way for as long as possible. Thanks to the DYNAMIK team for all your help and all the extra time you have given to help ensure the project’s success!"

Dynamic interior spaces created for flagship care homeIssue Quantum Care were launching their flagship care home, Mantles Court, and wanted an interior design that created a warm, welcoming and comfortable space. Quantum Care asked WHAT IF? Designs to create the interior spaces with a non-clinical feel, making the state of the art, 78-bed care facility feel like a home-from-home for residents. Approach WHAT IF? Designs looked at the flow of resident living spaces and the needs for each area. Communal spaces including lounges, dining and kitchen areas required floors that were easy to clean, looked fantastic and provided safety from slips. For the ensuite bathrooms, a softer, neutral coloured floor with slip resistance for both staff and residents was needed, while bedrooms called for a more homely, domestic feel, with comfort under foot as a priority. Solution Altro Wood was chosen for the dining room, bedrooms and the hair salon for its natural, homely, good looks. Altro Aquarius and Altro Pisces, with their wide colour palette and lifetime sustained slip resistance, were selected for the ensuite bathrooms, providing safety for shoe and barefoot users. And in the communal areas, Altro Ensemble was chosen for its flexibility and design choices as well as its noise reduction and comfort underfoot.

With the reputation of the illustrious Tottenham football club preceding it, the new Tottenham Hotspur Stadium is an emblematic building that has already secured its place as a sports stadium to be remembered.It has also become one of the more renowned and iconic spaces to have benefitted from Alumasc WMS expertise, receiving the full ‘rain to drain’ treatment.Comprising five core brands and more besides, Alumasc WMS was brought into the project to provide cohesive, integrated water management throughout the project. This eventually included the installation of Gatic Slotdrain systems, Gatic Access Covers and AssistLift Covers, Harmer SML below ground Cast Iron drainage and Wade floor gulliesto ensure effective water management all round.Completed in 2019, the 62,303-capacity stadium is one of the largest in the Premier League and the largest club stadium in London. The state-of-the-art sports and leisure centre can stage major events including football games, NFL American football games and rugby, as well as concerts and other non-sporting events.Populous Architectural Design were the architects on the project, however, it was Buro Happold Engineering that specified Gatic Drainage and Access Covers, Harmer below ground cast iron drainage and Wade floor gullies from Alumasc WMS for the task.

Products donated by F. Ball and Co. Ltd., including the company’s Stopgap 1200 Pro levelling compound, have been used to prepare subfloors as part of the renovation of the Coventry Caribbean Community Centre prior to its reopening to coincide with Coventry’s UK City of Culture status last year. Firstly, they removed old floorcoverings, revealing a rough screed. A moisture test also indicated that subfloor relative humidity levels were above the 75% maximum threshold for installing floorcoverings. Installers therefore opted to use Stopgap 1200 Pro to smooth subfloors.Stopgap F77 one-part waterproof surface membrane was then applied to prevent excess subfloor moisture attacking floorcoverings and adhesives, potentially causing complete floor failure.Once dry, the surface was primed using Stopgap P141, which is designed especially to promote the adhesion of levelling compounds to non-absorbent surfaces, including waterproof surface membranes. Another layer of Stopgap 1200 Pro was then used to create a perfectly smooth base for the receipt of new floorcoverings.Once the levelling compound had cured, Amtico Spacia stone-effect LVTs were installed in the majority of the floor area, with cream-coloured hexagon tiles positioned around the bar area for visual interest.

application area: heritageuse type: wood fireplace in country mansionproject scope: restore georgian fireplaces, keep large fireplace openingadded value: non-destructive solution, ideal for heritage buildings BackgroundThe 18th Century Georgian Country House is a Grade 1 listed building and also English Heritage. The owners of the Derbyshire home wanted to use the original antique fireplaces with the existing large openings. The pargetting in the chimneys had fallen away and the mortar joints were leaking into different parts of the building. Lining with stainless steel liners was not feasible here as it would have compromised the cross sectional area of the chimney and the fireplace opening would have had to be closed down considerably.Due to the protected status of the building extra caution had to be exercised to minimise the effects of the works carried out to the interior of the building.Statement of workThe installation was quick and it did not impact the structure of the building. 4x Furanflex RWV liners were installed, each was finished within a day’s work, making it possible to use the period fireplaces once again. The most important requirement was to keep the current chimney sizes the same. This was made possible by FuranFlex25, which was inflated inside the chimney flue to expand into the available space, maximising the lined flue size.