"multimedia presentation systems"

Challenge: The structure was had severe structural degradation due to the ingress of moisture and water over its near 100-year life. Corrosion to the steelframe resulted in tensile forces cracking and moving the brick skin, also causing a cracked façade. Strategy: ICCP was used as a method to control corrosion whilst the cracking and movement were repaired. This involved LoCem® and +point® AACM anode mortar to be grouted in the bed joints, alongside embedded corrosion rate sensors for service life tracking (AchillesICP and AiMS). LoCem® is a low carbon cement alternative, that can also act as a cathodic protection anode. Outcome: The structure was restored to be used as high-value residential apartments, saving tonnes of embodied carbon and eliminated the option of demolition. The embedded system successfully controlled and monitored corrosion for the long term, adding an additional 100 years to the structure’s service life.

It would have been easy to implement a traditional paving surface but, having seen the quality of our workmanship and attention to detail that could be produced with SureSet material, Anoopam Mission decided to use it for all of the pedestrian surfaces. One large benefit is that SureSet can guarantee no loose stones because it's a resin bound system that completely infuses the raw material whilst leaving voids for permeability, which also influenced its specification.A walkway blend was designed by our Technical Team to deem the installed materials suitable for heavy footfall and potential vehicular traffic. 

Volksbank Kleverland’s new customer centre is an eye-catching architectural masterpiece. The interior of the bank office consisted of curved and tapering shapes. This required bendable railings and a flexible solution for alignment of the glass infills. A combination of Q-railing’s Easy Glass Slim and Easy Glass Pro glass balustrade systems was the perfect fit. Easy Glass Slim had previously been installed with a bend radius of less than 500 mm, which is unique in the market. In total, more than 130 metres of glass railing was installed on the upper floors and stairways.

Delta products were used at ground level on a semi-detached property in Hertfordshire that suffered from severe flooding. After the flood at the Grade II listed property in Long Marston, restoration experts DJ Hutchings of Towcester was called in, and – in turn – they called upon the services of Peter Cox . Work includes the full strip-out of all wall finishes and the solid floor on the ground floor. Mass underpinning took place to all the external walls. Included in the materials supplied by Delta is the MS500 system applied to all ground floor walls and MS20 on the floors.

The Excelsior Building is a new addition to the impressive Haberdashers’ Aske’s School campus in Borehamwood. The courtyard comprises planted beds, with social spaces and pathways in a mix of resin-bound gravels and synthetic grass surfaces. To allow pupils to enjoy this new outdoor space a seating system was required that was sufficiently flexible, and RailRoad was the ideal choice. Over 60 linear metres of the Delta version from the RailRoad range was supplied, creating 4 long curvi-linear seating runs and also some shorter independent straight units, together with purpose-made steel planters.

Contemporary Glass Structures were selected to manufacture and install a flush glazed mirror door into a 4th-floor terrace glass façade as part of extensive renovations of a commercial office building in the heart of Manchester’s professional district. Drawing on their experience in the fenestration industry Contemporary offered a bespoke solution and specified the Kestrel Aluminium residential door system as the base for the project.

Luxury boutique hotel Sir Joan, located in Ibiza Town, houses 12 hotel rooms and 2 rooftop suites with private pools and stunning views of the port of Ibiza. The black and white façade combines traditional and current Ibizan architecture. The openings in the façade offer privacy to guests and create natural ventilation and lighting. This stunning aesthetic was achieved using Reynaers CF 77 and CP 155(-LS) sliding and folding door systems, and CS 68 aluminium window systems.

A Wiltshire farmhouse has updated its heating system, replacing its original heat pump with a Grant Aerona³ air source heat pump which has been installed alongside a QR hot water cylinder. The new heat pump and cylinder were integrated alongside an existing solar thermal system, giving the property’s renewable heating system an upgrade.

Toploc provides sustainable cover for Solas Eco Garden CentreMarlon Toploc was the ideal canopy glazing solution for this impressive retractable canopy roof at the Solas Eco Garden Centre.  In addition to Marlon Toploc providing all of the characteristics required to realise the designers specification, product manufacturer, Brett Martin's values align perfectly with Solas when it comes to sustainability and a greener future. Solas is one of the few Eco Garden Centres in Ireland, providing an excellent, eco-friendly, customer experience.  Now employing over 100 people the Garden Centre brings a breath of fresh air to the local community.Clear Marlon Toploc panels provide 64% light transmission, flooding the area underneath with natural daylight to create a bright and airy outdoor space while providing shelter from the changeable Irish weather.In this instance, clear 16mm sevenwall Marlon Toploc panels were cold curved on-site and mounted in sections at three different heights to a retractable pulley, allowing the canopy roof to open. The Marlon Toploc panels are secured with the Marlon polycarbonate cap profile for a seamed finish on the canopy roof.Marlon Toploc polycarbonate panels are strong and durable and co-extruded with UV protection on both sides as standard to protect the panels and everything underneath from harmful UV rays. The Marlon Toploc standing seam system is light in weight making both installation and on-going movement of the retractable roof easy.

Commercial to residential, it may be last orders for some of our great British pubs, for other’s its discovering exciting ways of transforming commercial structures into luxury residential dwellings.  The growing trend of converting old inns offers new homes a unique history whilst being packed with character and features.Delta Registered Installers, Advance Property Preservation Ltd were engaged to assist on a troublesome vaulted basement to a property, based in central London which had already been converted into high living accommodation.Just off the basement area were two large vaults around 12m long. Made from brick barrel construction, this below ground space had previously used for storing kegs of ale!One of these vaults had previously been converted into a spa area with jacuzzi and steam room, the other was used as a storage area. The owners had previously had the storeroom tanked with a Type A, render system, however this approach repeatedly failed, allowing for substantial water ingress which was causing damage to items stored in this area.With Structural Waterproofing one of the major contributors to project failure lies with the design. When hiring contractors, ensure the design, procurement of materials and installation is undertaken by one specialist will naturally reduce these known and associated risks. A specialist contractor will always be able to offer quality assurances.

A new ferry terminal on Brodick Bay, created as a tourism and community gateway to the Scottish Isle of Arran, has been fitted from stem to stern with door and window systems supplied by GEZE.Maritime design and modern comfortThe ship-shaped terminal, designed by the renowned architectural firm Norr of Glasgow, is part of a £30 million investment which aims to update the harbour, get it ready for 21st century travel, and improve passenger comfort.Natural ventilation thanks to automated windowsThe generously sized lounge with its double height and large wall of windows on the western façade offers visitors a breathtaking view of Brodick Bay. The large windows, which are automatically opened and closed by 30 GEZE Slimchain chain drives, give the reception area at the main entrance to the building a bright and spacious feel. The uniquely slim and understated look of the Slimchain window drives integrates perfectly into the unique façade design of the Brodick ferry terminal.The Slimchain window drives were installed not only on the large windows in the lounge, but rather throughout the entire two-storey building – with the exception of the upper ventilation openings: Powerchain chain drives are used there. These especially powerful window drives were chosen to operate the larger windows, since they allow for large opening widths – which is important for quickly venting smoke in case of a fire.The window drives are connected to a GEZE MBZ 300 SHEV control panel for smoke and heat extraction drives, which is integrated into the building management system of the terminal. This makes it possible to easily control and monitor the complex natural ventilation system.Ventilation, smoke and heat extraction, and emergency exit protectionThe windows in the staircases are also equipped with Slimchain chain drives. If needed, the window systems also allow for natural smoke and heat extraction: In case of smoke and heat, the smoke extraction solutions open the windows and control fresh air openings, so that lifesaving escape routes remain smoke-free and safe to use in case of an emergency. In addition, GEZE OL Line manual fanlight openers provide supplementary natural ventilation.Door systems for accessible fire protection doorsBeneath the glazed western elevation are two automatic swing doors to either side. These are powered by GEZE Slimdrive EMD-F door systems, just like another door on the side façade of the building. The electro-mechanical swing door drives for single leaf fire and smoke protection doors are extremely versatile: They provide power assisted opening and can be initiated using the operating button with constant opening and closing speed. Integrated obstacle detection also identifies potential obstacles and stops the opening or closing process if needed. By doing so, Slimdrive EMD-F drives also ensure easy and safe access for people with mobility issues.Understated design and high access convenienceFrom the main entrance, a glazed corridor leads to a bi-parting sliding door powered by a GEZE Slimdrive SL NTsliding door system, which leads into the foyer of the main reception area. The Slimdrive door drive fulfils two key stipulations here at once: It is suitable for interior and exterior doors with high levels of footfall, and ideally suited for glass façades with high design standards – such as the Brodick ferry terminal – due to its low operator height of just 7 cm.

Royal Winchester HouseComer Homes is renowned for the high quality of its residential and commercial developments, which span London, Hertfordshire, Dorset and throughout the South East. Its latest project is Royal Winchester House, a landmark building of one and two bedroom apartments at the heart of Bracknell's new town centre. As a planning requirement of Bracknell Forest Council, Comer Homes was required to provide a sustainable, low energy form of heating that would offer a reduced carbon footprint, as well as being affordable to run.The SolutionComer Homes specified F730 Exhaust Air Heat Pump systems from NIBE for all 337 apartments on the development to ensure they could meet their renewable targets. The new homes builder employed MKP Consultants Limited to undertake the building services design as they had previous experience of NIBE systems on other apartment developments in the area.The NIBE F730 Exhaust Air Heat Pump system was an ideal solution, as it offers mechanical extract ventilation, alongside heating and hot water in a compact design. The heat pump units were installed in a service cupboard in each apartment, as they have a small footprint of only 0.6m2.NIBE F730 operates by recovering energy from the ventilation air and, if desired, extracted from outdoor air, the heat energy is absorbed by the heat pump using a vapour compression process and subsequently transferred to the water-borne heating system, in this case an underfloor heating system. The integrated 180L domestic hot water cylinder also ensures a plentiful supply for the one- and two-bedroom properties.A sustainable solution, NIBE F730 keeps energy consumption to a minimum. The efficient control system automatically adjusts the indoor climate for maximum comfort for the occupant, using a combination of weather compensated control and the low energy inverter driven compressor.Each apartment is also fitted with a NIBE RMU 40 room controller, to allow greater flexibility of control for users and if required can be easily connected to NIBE’s internet remotely monitoring and control platform UPLINK™.Thanks to this innovative heat pump system, residents at Royal Winchester House are set to benefit from lower energy bills and a reduced carbon footprint.The ResultsThe NIBE F730 system complies with Parts L, F and G of the building regulations, and helps to meet planning requirements designed to reduce energy consumption and carbon footprints within residential housing developments. External noise is kept to a minimum and building aesthetics are unaffected by the need for external plant.TestimonialHead of Projects at Comer Homes, Jack O’Brien explains: “We were looking for a heating and ventilation system that would be both sustainable and affordable to run. We have been impressed with the performance of NIBE’s heat pumps, with their high efficiency, low noise and low running costs further enhancing the sustainability of the whole development.”About Royal Winchester HouseRoyal Winchester House is a landmark building of high specification 1 and 2 bedroom apartments available to rent. The unique design and architecture of Royal Winchester House creates a striking and impressive presence from the ground floor retail spaces up to the luxury penthouse levels.Royal Winchester House has been built for the private rental market and the development is being managed by Chancellors estate agency. The apartments benefit from high standards of insulation and air tightness. In addition to the NIBE heat pumps, the whole development has been fitted with a biodigester for the repurposing of food waste, as part of reducing waste sent to landfill and to add to its sustainability.

SubFloor flooring was used in a conversion of an industrial premise for youth gaming activities. This allowed insulation to separate the cold floor from the main area and for wiring installations under the floor.This simple and elegant solution raised and levelled the floor to allow for installations and insulation. The joist and screw system allows for quick and easy assembly so that the floor can reach the desired height.95 mm Rigid insulation was positioned on the insulation bearers and a 22 mm chipboard was placed on top.Products:Wooden Joist 45x45x3600 mmSubFloor Screw 200 mmSubFloor Screw FootInsulation Bearer 95 mmHeight Variation: 105 - 236 mmJoist separation: c/c 600 mmSystem Weight - c/c 600 mm: 2.82 kg/m²Materials:Pine T0-C24Fibre-reinforced polypropylenePolyamideCold Galvanised Sheet SteelPoint Load Limit (50 x 50 mm):Load next to screw over joist edge - 9.72 kNLoad between screws over joist edge - 15.85 kN

Product name Slimdrive SL NTType Door openers / closersDoor type suitability Sliding doorsOperation ElectromechanicalInstallation Door surround mountedGrade CommercialMax. size of door leaf 120kgOperator dimensions (mm) 70mm highPart of the Slimdrive range, the SL NT is an electronic automatic sliding door system that offers flexibility, reliability, functionality, efficiency and safety.The extremely slim design of the SL NT makes it possible for the operator to be concealed in any facade, giving architects the freedom to design stylish entrances. Extremely versatile and suitable for a wide range of applications, the Slimdrive SL NT can be used for single- or double-leafed internal or external doors. GEZE Slimdrive SL NT also benefits from quick and easy assembly and installation.The Slimdrive SL NT is an intelligent automatic door system that is perfect for busy entrances to buildings such as shopping centres, hospitals and stores - anywhere where there is a high volume of traffic and where manually operated doors are not appropriate.The Slimdrive SL NT is suitable for a variety of applications, from the simple installations to grand all-glass facades. Two or more SL NTs can be combined to provide a draught-proof lobby.Key featuresOne of the most compact sliding door operators availableOperator height only 7cmEasily integrated into almost any facadeEnvironmentally friendly due to economical use of materials and energyDimensionsOpening widths: 700 to 3000mmWeight: up to 125kg per leaf

Our Type 100E Fully Electric movable wall was installed here a few years ago. This fully automatic system allows for ease of use and gives the client the ability to open or divide the lecture theatre in minutes with the touch of a button. With an acoustic rating of Rw 58dB, both sides of the theatre can have full AV lectures without disturbance. Each panel is hand crafted to millimetre precision to match every step and riser, then fabric wrapped in sound absorbing acoustic panels and installed by our own highly qualified technicians. There are walls, but there’s only one Movawall.

Hull homeowner Ben Andrew is watching his home energy bills carefully to measure the benefits of switching from an all-gas heating and hot water system to a combination of gas boiler and air source heat pump.

Location: Wellington Road, Wokingham, Berkshire RG40 2AGProject type: Mixed useProject Cost: £38mProducts: Dove Gutter system76.2mm Sq Contemporary Rainwater pipesFascia Soffit systemFinish: PPC RAL 7005 Gloss Mouse GreyFire Rating: A2 s1, d0 Non-combustible (Reaction to Fire EN BS 13501-1:2018)Client: Wokingham Borough CouncilArchitects: Benoy ArchitectsComprehensive Design ArchitectsContractor: McLaughlin & Harvey Ltd Photography: a2n

Refurbishment began at The Champneys Luxury Spa Hotel in Henlow in 2017 with the aim of blending traditions of old with innovations of the new. This was the perfect opportunity for Genesis MHS120.35 Movement Joints to be used in the project. With the choice of any RAL colour available for the insert, getting the perfect match/contrast is simple and combined with their functionality, it was a match truly made for the spa.As work began on the spa, the changing rooms reached completion with sleek marble surfaces, a new locker system and a carefully thought out layout to maximise space.Genesis TDP tile trim profiles have been used throughout the refurbishment project to add the finishing touches around the hotel. With 27 finishes to choose from (one of the largest selections available in the market), the perfect complimentary trim is always in reach.The Champneys Luxury Spa Hotel opted for our Brushed Brass finish TDP trims to perfectly blend traditions of old with innovations of the new.

Degaflex Fire Rated Roofing system providing a watertight finish, either smooth or textured. This installation was required to overcome a long standing issue with water ingress / leaking through the roof.The building was an outhouse in Snodland, Kent. The roof had been leaking for some time, Degaflex was installed onto a felt substrate by London GRP Roofing Ltd.Stephen Knuckey, the Director of London GRP Roofing Ltd. posted on LinkedIn ‘Our #Degaflex overlay. Safe to say I’m extremely pleased with the finish on this. Being a felt overlay and turning out this smooth, I’ll be looking forward to applying it directly to an OSB deck.’

The purpose: Energy savings of £¼million over 20 years at just two of its sites are predicted to be achieved by London Fire Brigade through effective roof refurbishment using our Roofing Solutions. The brigade identified that the roofs at Erith and East Ham Fire Stations were in need of refurbishment. Numerous intermediate repairs had already been undertaken. An efficient solution was needed to help London Fire Brigade optimise best value in its asset management and reduce its requirement for planned- or unplanned- maintenance.London Fire Brigade therefore turned to Currie & Brown construction management consultants to oversee the design and execution of the refurbishment projects under a contract management framework agreement in place between the two organisations. We was called in to assess the roofs and advise on a course of action. Data driven roof condition reports from surveys were taken across the two premises. We highlighted that the roofs were beyond economical repair and needed new waterproofing and insulation- a U value of 5.00W/m2K was discovered in one roof area, against the Regulatory threshold of 0.35W/m2K and best practice 0.18W/m2K. Our solution: We advised that in the main, overlaying of the existing roof covering with CP-20 Paracoat Cold Polyurea Liquid System (warm roof) application was the most-efficient and cost-effective solution.The over-laying using the CP-20 system satisfies London Fire Brigade’s policy of preference for flame-free, with no roof replacement needed this minimised waste to landfill.Our Approved Contractor CWG Group won the contracts to undertake the upgrading, working to Langley’s detailed individual specifications for each site.At East Ham Fire Station, four main roof areas plus a separate ancillary building were addressed.LangGuard free-standing safety rail was installed around the perimeter of roofs 1 and 4.The final touch for the field roof area was provided with Paracoat Fast SF slip-inhibiting finish to agreed walkway areas.At Erith Fire Station, the refurbishment involved upgrading two roof areas including a rooftop tank room and adjoining canopy of corrugated PVC over the Station building, and a separate stores roof.

In realising the Beiersdorf Campus, the Lindner Group played a key role by providing customised solutions for efficient space design. Particularly noteworthy is the Lindner Cube with occupancy light: This innovative room-within-a-room system is renowned for its stand-alone construction, which requires no connection to walls or ceilings, thus contributing to flexibility and dynamism in modern office environments. The new occupancy light, discreetly mounted on the ceiling of the cube, was a standout feature. It automatically activates via a presence detector, indicating the cube's occupancy and promoting a disruption-free work atmosphere.This smart feature not only increases space efficiency but also optimises operational workflows. Additionally, the Lindner Cube allows for bespoke adaptation to a company's corporate design with a choice of colour options and different lighting elements.Completed WorksRoom-in-RoomLindner Cube soloPartitionsPartition Systems GlassLindner Life Stereo 125Partition Systems Full PanelLindner Logic 100 TimberWall and ceiling panelsCOMPlacq

The Enterprise Lab at Imperial College, London, benefits from the installation of a DORMA Variflex moveable wall system, allowing the room to be divided into a breakout area and workspace. Partitioning experts, Style was closely involved during the design stage of this project as the basement room is located at the bottom of a tight staircase, causing access issues. “We recommended Variflex as it is such a flexible and adaptable system,” said Julian Sargent, Style’s group managing director. “Most importantly, the panel faces are manufactured separately from the frames, allowing each element to be manually manoeuvred down the stairs”.

Project type: Leisure Centre Location: Sidwell’s Leisure Centre, Paris Street, Exeter, EX1 2JX Project Cost: £44m Product: Complete Eaves System Including: Fascia Soffit (Facetted and Tapered), Hidden Aluminium Gutter Finish: United Anodisers Anodised Aluminium: Anolok Bronze 541 Fire Rating: A1 – Non-combustible Support method: Dales Monocoque Support System Architect: Space & Place Architects  Architect: Gale & Snowden Architects Contractor: Kier Western Ltd Sub Contractor: Massey Cladding Solutions Ltd

The London Olympics Aquatics Centre has been given a watertight seal with the application of Preprufe® waterproofing membrane from GCP Applied Technologies. GCP was able to meet the architects’ full requirements combining the Preprufe® comprehensive waterproofing and gas protection with a range of fully compatible pre-applied and post-applied membrane systems. The specification of the Preprufe® waterproofing system has ensured that after the Olympic games, the facility will continue to benefit from long term waterproofing and gas protection performance befitting of the Olympics Legacy. Find out more.

In recent years, Southwark Council encountered problems creating and maintaining attractively paved surfaces in busy carriageways. Tobermore introduced Southwark with a solution – the City Pave VS5 block paving system. The innovative product incorporates shift protection on five sides of each block via interlocking nibs and a specially profiled bottom surface that claws sand beds. These innovations provide continuous protection against shifting.

DescriptionLocal Smet Supported Partner, a seasoned Lidl Contractor, McCallion Group machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render, and as Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render.The internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The Irish LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and the Smet Supported Partner superior technical backup, are key factors in choosing SMET.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.Related DownloadsTDS CASEA Bauprotec 850 M – Lightweight Lime Cement RenderTDS CASEA Bauprotec RHS – Multi-Purpose Render

Fed up of renting in London, Joe and Lina decided to build their own on a tiny 38m² plot of land in East London. With a budget of just under £200k they set about delivering Joe’s innovative concept for a six half-floor house with floating concrete slab, designed to maximise the space into a 83m² home, all whilst being filmed by Channel 4’s Grand Designs. However, things soon went south…Within weeks of the project beginning in October 2015, rogue contractors had performed a disastrous basement excavation attempt contrary to the Structural Engineer’s instructions, leaving unsupported banks of earth falling in beneath the street and shutters bursting inwards under the weight of the concrete.This first attempt, described as “spectacularly shambolic” by Kevin McCloud, more than doubled Joe and Lina’s budget for the excavation from £48k to £100k, and caused months of delays in order to get the project back on track.Having already contacted Newton Waterproofing Systems to consult on the poor workmanship, Joe and Newton soon determined that if he were to save his home and get it out of the ground, he would need a specialist contractor to actively communicate, collaborate and listen to him as both the engineer and client.MJ Rooney Construction came on board as contractors in November 2015, and following discussions to determine exactly what was required, modelled the entire project in 4D to ensure that all potential difficulties were solved before work began.With the right lines of communication in place, work recommenced in late January 2016, with the first challenge being to make safe a 3.5 metre high bank of unsupported earth with sheet piles, before creating a new and waterproof structural shell of reinforced concrete.With the shell of the structure in place, Newton and MJ Rooney’s next challenge was a much more welcome one, as they created a bespoke waterproofing solution to accommodate Joe’s ingenious design for a suspended reinforced slab that acted as both a floor and a prop force against the lateral pressure from the basement walls.This entire slab rested on brackets designed by Joe and his structural engineer, insulating it from the external walls by ensuring minimal contact, and only making contact through insulated blocks with enough compressive strength to take the vertical loading. The design also created a cavity around the slab that can be fully insulated, allowing the slab to be used as a thermal mass inside the building without having to insulate the entire external envelope.Working closely with Joe, a solution was devised that enabled the continuity of the waterproofing behind the brackets without compromising the structural design.

HLM, the architectural practice had a very high-end, designer lead project at Park Lane London, which required bespoke components mixed together with standard products forming a warrantied bathroom solution for the client. 15 types of different bespoke XPS shower trays were created for this project and used across the 460 rooms spread over 3 phases.240 bespoke XPS niches were installed and in 210 cases substructure sets were used to reach the required 100mm installation height thus allow for a straightforward replacement of old baths with showers without having to modify the existing pipework.In all bathrooms, wedi XPS building boards were used in 12.5mm thickness for walls and 10mm thickness for floors.RESULT: Thanks to the sub-contractor Milk Leisure, an Approved Partner of a leading manufacturer of XPS shower/bathroom systems, the client received a 100% waterproof bathroom with a 15 year manufacturer’s warranty on the whole installation. 

SIG Design & Technology and SIG Insulation are working with the Interserve Kajima consortium on a batch of seven secondary school projects to deliver a value-engineered, robust roofing solution. At Stopsley High School there are two roofs installed by Briggs Amasco in an approximate 16 week programme. The largest roof measures some 2500m2 and the inverted roof build up selected and supplied by SIG comprises IKO’s PermaTEC hot melt waterproofing system.

The former ToysRUs premises in Luton required complete refurbishment and part of the project involved renovation of the metal roof. Liquasil's BBA Approved Metalseal 20 system was specified because it includes the advanced, SWT Primer to treat cut edge and spot corrosion in-situ. The metal gutters were lined with Liquasil's Gutterseal, seamless liquid gutter lining system. Upon completion of the metal roof coating project, the unique, Liquasil Latent Defects Insurance Guarantee was issued. The Liquasil guarantee includes cover for Professional Design, meaning that you can specify Liquasil products with 100% confidence.

The 2,500m2 basement extends beyond the property where a blue-green roof will be created over a suspended podium deck to form part of the garden. The Triton team worked closely with waterproofing and blue-green roof design specialists, EPG, to create a waterproofing strategy and utilised a comprehensive Construction Quality Assurance protocol agreed between Triton and EPG. The Triton team had been called in by main contractor, Era Build Ltd, to replace a previous supplier who had been unable to provide a warranty. After detailing was complete; Triton Approved Contractor, Cast Contracting Ltd (CCL), installed the systems.

Manufactured with an extruded polystyrene foam core and a special coating on both sides, Jackoboard construction boards from Jackon by Bewi can be used as part of a system approach for tiling.With a range of shower trays and drain kits, Jackon says Jackoboard can help create a perfect wetroom or bathroom environment.Jackoboard construction systems provide the flexibility to meet modern requirements in bathroom design. “What was once considered a mere washroom has now been elevated to a private wellness oasis,” Jackon says. “In recent years, the demands placed on bathroom finishes have changed dramatically to allow refurbished bathrooms to shine like new with flexible and high-quality renovations.”The current British Standard for tiling, BS 5385-1:2018, requires the wider use of more appropriate materials for construction, and for receiving tiles in water sensitive and wet areas. This has reportedly increased the demand for the Jackoboard range in new build applications as well as in renovation works.The products are manufactured sustainably and, being superb insulators, they can be used in the design of energy-efficient homes, the company says. The protection of the environment is key to parent company Jackon by Bewi. The company says that plastics, when used as long-term construction materials can greatly reduce the need for heating energy and can therefore make a positive contribution to tackling the climate crisis. In fact, Jackon has been running a campaign in recent years to supply beehives made from the company’s polystyrene bead to the Bee Centre in Chorley. Like Jackoboard, the company says, these beehives will last a lifetime and provide better insulation than the alternatives, enabling the Bee Centre to continue its outreach work in support of honeybees and beekeeping.The surfaces of the Jackoboard system are said to provide an extremely strong bond for the tile adhesive and can be used on virtually any substrate. The boards are waterproof, thermally insulating, very lightweight and strong.The range can form the basis for a tiled finish, but it can also provide a substrate for wallpaper, paint or plaster. “So the possibilities for personal expression are virtually unlimited, allowing every bathroom to benefit from its own individual style,” Jackon says.Due to their core made of extruded polystyrene foam (XPS), Jackoboard construction boards and the wider product range are all lightweight and waterproof – a key benefit for bathroom new build and renovation.Jackoboard also makes installation “simple and easy”. The construction boards, bath panels and angle elements can be trimmed to the desired dimensions with standard tools, while their insulation values reportedly enable them to maximise the benefits of underfloor heating.The range is available in sizes and board thicknesses from 4-80mm to suit all building requirements. A suite of ancillary items are also available, from installation and sealing kits through to washers, fixing dowels and BoardFIX.J-Drain Linear and J-Drain Wall are recent additions to the family of wetroom products from Jackoboard. These products provide what the company calls a high-tech design solution to enable the creation of a totally minimalist walk-in shower.Both products are designed be used in combination with Jackoboard Sloping Boards for the floor and Plano Boards for the walls, to provide everything needed for a “highly fashionable and innovative walk-in shower solution”.“From a design point of view, these products are completely on-trend, given that the minimalist look for walk-in showers is very popular at the moment,” Jackon says. “Achieving this with a highly effective drain solution, which also showcases the tiling to maximum effect, is a key selling point for these new products, used together with Jackoboard backerboards.”

Premier Loft Ladders were approached for a challenging project requiring a loft ladder suitable for providing safe and easy access to the loft of a period home. However, the high ceiling and small opening presented an issue, ruling out many loft ladders. Furthermore, safety was an important consideration to the home owners. As such, the retractable ladder needed at least one handrail and wide non-slip treads. Also, it was essential that the ladder was robust and stable. The Ecco perfectly fit the particularly tight constraints for this project. Also, the counter-balance spring system meant it was easy to operate

In a complex new build roofing project that was deemed almost impossible, Contour Roofing stepped up to the challenge with a Sika Sarnafil membrane. With truly stunning results, the project impressed the judges of the prestigious NFRC UK Roofing Awards, winning the Single Ply category. In partnership with Sika Sarnafil, Contour quickly presented a new bespoke specification; an adhered system using Sarnafil G410-15ELF Lead Grey with a polyester fleece backing as the main roof sheet for a flawless result and Sarnafil G410-15EL Lead Grey for all the detail work flashings.

Onyx Apartments is an 11-storey building located on the Regent’s Canal banks, offering 117 bespoke homes. The development was designed as a modern, elegant and professional living environment. Comfort and safety were top priorities in bringing this project to life and Reynaers products were used to realise those aims. CS 86 ‘High Insulated’ aluminium window system offers an energy-efficient option, and CP 155 ‘Lift and Slide’ aluminium door system creates maximum glazed areas while also maintaining comfort. Onyx Apartments is a great example of combining elements of luxury and practicality, bringing a fresh perspective to the area.

To fulfil the requirements of BS8102:2022 and BS 8485:2015+A1:2019 a strategy to develop a specification which combines structural waterproofing and ground gas protection were required for this refurbishment project.The project involved creating additional living space to an existing mid terrace Victorian property in W12. The site of the property, whilst not being located on contaminated land was identified as being potentially at risk, it was near what is classed as contaminated land (an old brick yard).To satisfy Building Control requirements gas protection measures were required to meet BS 8485:2015+A1:2019.Site investigations at former brickworks and landfill sites are within expected UK guidelines for contamination. Ground investigations incorporate both soil sampling, ground gas and groundwater monitoring.In accordance with Table 3 of BS 8485:2015+A1:2019 a residential building is classed as a Type A building, creating a “high risk” requirement for ground gas protection. With the structure requiring a Grade 3 habitable environment attention as required to offer a system which meets all requirements.