"basins and sinks vanity units"

REQUIREMENT: A modular step unit and upper landing to the basement goods lift.The new system would replace the narrow concrete steps, which were concluded to be unsafe and didn’t have handrails to prevent falls.ADDITIONAL INFORMATION:A site survey was carried out, and an in-house 3D ramp design was drawn to suit the space.The drawing shows that the air conditioning unit above the step unit would need to be moved 200mm away. END RESULT: We installed a yellow modular system straight over the existing steps within a few hours.This approach prevented the concrete steps from being removed and saved the client the extra time and money involved in hiring another trade to complete the enabling works. A bespoke platform joins the upper landing, and the feet were fixed into the concrete floor to keep the system securely in place.FEATURES INCLUDED:Trombone Ends - these are added to the ends of a step system to prevent clothes catching.Mesh Platform - the self-draining mesh allows water to pass through rather than collect on the surface.Standard Colour: Yellow – one of the easiest colours to see because of its ability to reflect light. The handrails are powder coated to create a durable finish that is tougher than conventional paint.Standard Handrail - this handrail system ensures users always have support to hold onto.

We supplied 24,000m2 screed binder to our Smet Supported Partner, Fast Floor Screed Ltd. The industry experts pump-applied Südanit 280 Alpha Hemihydrate Screed using their fleet of Mobile Screed Factories in the new hospital complex, The National Forensic Mental Health Service (NFMHS) in Portrane. We supplied 20,000 m2 Rapidur® B5 Rapid Drying Floor Screed which was laid by industry experts, B Doherty Screeding Mobile Screed Factory).The NFMHS is a new state-of-the-art facility located 22 km from Dublin City in Portrane, North County Dublin. The project was awarded by Health Service Executive to the Joint Venture formed by OHL (50%) and OHL’s local delivery partner JJ Rhatigan (50%).The project, which commenced works on site in 2017, comprises the construction of a forensic mental health hospital, as part of St. Ita’s Hospital complex. It covers a floor area of 24,000 m2, not including the energy, maintenance, and gardening buildings. The new hospital will accommodate 170 patient beds, distributed as follows: National Forensic Hospital: 120 beds; Mental Health Unit for Children and Adolescents: 10 beds; Intellectual Disability and Mental Health Unit: 10 beds; and the Intensive Care Rehabilitation Unit: 30 beds. The construction project also includes the execution of spaces related to energy production systems, maintenance, and horticulture.

Chelsea Barracks residential project includes 126 extra-care and affordable housing units, a two-storey public sports centre, four shops and an NHS medical centre. MContactor Mace selected Aspex to supply Novista riser doors.

The data sets for SIEGENIA's ventilation units can now be found in the CAD/CAE software Trimble Nova. This enables architects and planners to carry out easy and reliable planning with the facade and wall-mounted ventilator data as well as components contained in the software.

Overview A collaborative project with our long-lasting customers Jet Environmental Systems resulted in the successful installation of three HEM-SLx 525kW heat exchange modules, aimed at providing warehouse heating for a prominent automotive component warehouse in Ellesmere Port. The project involved a bespoke-designed air handling unit (AHU) expertly manufactured by Linton Services Ltd and delivered as a comprehensive turnkey heating solutionBackgroundThe warehouse had a substantial floor area of 39,000m2 and a volume of 760,000m3. The main requirement was to maintain an internal temperature of 16C degrees, even during outdoor temperatures as low as -4C degrees. To ensure efficient heating and uniform distribution throughout the space, a HEM-SL heating solution with a capacity of 525kW and an airflow of 37.5m3/s was needed. The client preferred natural gas as the heating fuel, which Jet Environmental incorporated into their custom-designed air handling unit (AHU) manufactured by Linton Services Ltd in Presteigne.SolutionThe warehouse layout and heating load necessitated the use of three air-handling units. To ensure a reliable and robust heating system, Jet Environmental selected Powrmatic as the heating supplier. Jet Environmental, Linton Services, and Powrmatic have a longstanding relationship and extensive knowledge of each other’s businesses. This familiarity ensures seamless integration of their products and expertise.Each custom-designed HEM unit was manufactured in the UK at Powrmatic’s manufacturing in Ilminster, Somerset. By choosing British-built products, customers can have confidence in the reliability, durability, and adherence to strict industry standards. Each HEMx unit is custom made with a wide range of kW and size configurations and has been adapted to suit the needs of the OEM and AHU industry by the provision of its slot-in casing arrangement.ResultThe collaborative efforts of Jet Environmental Systems, Linton Services, and Powrmatic resulted in the successful implementation of an efficient heating solution for the automotive component warehouse. The customized AHUs, designed by Jet Environmental and manufactured by Linton Services, effectively delivered the required heating capacity to maintain a consistent internal temperature of 16C degrees. Powrmatic’s reliable heating equipment ensured optimal performance and met the client’s expectations.The client was impressed with the comprehensive turnkey solution provided by Jet Environmental Systems. They were particularly satisfied with the partnership between Jet Environmental, Linton Services, and Powrmatic, which demonstrated a deep understanding of their businesses and the ability to deliver a reliable and efficient heating system.Overall, the successful completion of this project showcases the expertise that Powrmatic has in providing effective warehouse heating solutions for industrial applications.

Project: Creative Centre, York St John UniversityClient: Tate+Co ArchitectsScope of project: Design and supply 24 bespoke-sized rooflights for the roof of a triple-height atrium to fit within apertures in a glulam timber grid.Products: 24 bespoke sized em.glaze rooflights, some with concealed actuator smoke ventsThe ChallengeThe roof of the striking 14m, triple-height atrium, which forms the centrepiece of the newly opened Creative Centre at York St John University, features a glulam timber roof grid. Architects Tate+Co wanted to punctuate that grid with bespoke sized rooflights to bring even more light into a space which is used as an exhibition, teaching and theatre space, as well as somewhere for students to mix and relax. The rooflights had to have a sleek, minimalist aesthetic, in line with the overall design intent of the atrium and, because almost all the services in the atrium are hidden, needed to be available with matching concealed actuator smoke vents.The SolutionWhitesales designed and supplied 24 bespoke-sized em.glaze rooflights which suited the specification perfectly. The flush-glazed glass-to-edge design of the em.glaze units with flat sealed glass units fitted within a fully welded, thermally broken aluminium frame achieved the lean, crisp look the architects were looking for. The fact that they were also available with fully concealed actuators in the smoke vents supplied by our affiliate business Sertus was an added bonus. All the rooflights were supplied for the project complete with preformed 300mm PVC splayed upstands, which enabled them to be fitted directly into the glulam grid, saving the contractors time on site. They were also fitted with specially coated glazing which allowed for a degree of solar gain and contributing to the low energy requirements of the BREEAM Excellent rated building.‍The BenefitsAs well as the meeting the design specification, Whitesales’ technical team helped to ensure that the em.glaze rooflights could be installed quickly and efficiently by the main contractors Kier Construction. We estimate that our recommendation to supply the units with preformed 300mm PVC splayed upstands saved the roofing team at least two weeks on site because they didn’t have to construct the upstands themselves and the integrated splay made waterproofing the roof a lot easier. Tate+Co Director Andy Baker-Falkner is delighted with the em.glaze units: “We liked the lean, crisp design of the Whitesales em.glaze units, particularly with the clean white reveal and option for fully concealed vent actuators.”

At One Bank Street, on London’s Canary Wharf, partnering architecture firms Kohn Pedersen Fox (KPF) and Adamson Associates Architects turned to Bobrick: a total of 127 B-320501 TrimLineSeries™ recessed 3-in-1 combination units with concealed locks.

When the ACCORD Hospice in Paisley, Scotland, needed to modernise its Inpatient Unit, which offers specialist palliative and end-of-life care for people with complex needs along with support facilities for their families, the uppermost driving factors were infection control, comfort and aesthetics.

Adapt-Air units have been installed by one of the UK’s leading housebuilders on a new housing development in Wombwell, South Yorkshire. The Adapt-Air provided a ducting to airbrick solution, eliminating the mess and time associated with core drilling as well as the hassle of on-site kit assembly. The site manager was thrilled with the practicality the Adapt-Air units delivered, easing the typical hassle of installing ductwork. By eliminating the need for core drilling and external fitters, the Adapt-Air also delivers a cost-saving of approximately £250 per housing plot. With this particular development consisting of approximately 150 plots, the use of Adapt-Air has facilitated a cost saving of over £37,500 for the company. "Adapt-Air has removed a health and safety problem for me on-site with core drilling and you can’t put a price on that." - Site Manager

Spring Boroughs is a development of 34 new affordable homes, comprising of 2 and 3 bed houses and a retail unit. Originally a scheme comprising of 18 homes off Little Cross Street, this development went under a full review to secure more sites and increase the development, including the relocation of a retail unit. Significant social value was created as part of the development, as it provided the community with much needed affordable housing.Cellecta’s ScreedBoard 28 was specified by Northampton Partnership Homes due to the high sound reduction performance and low floor levels. As it’s suitable for all floor types, it is frequently viewed as the solution of choice for new build and refurbishment developments. Its interlocking edges for installation convenience, high density, and unique resilient layer provides unrivalled acoustic performance.Willmott Dixon was supplied 600m² of Cellecta products to develop these flats in Northampton.

RAF Akrotiri is home to the Cyprus Operations Support Unit providing joint support to British Forces Cyprus and operations in the region to protect the UK’s strategic interests.The base was opened in 1955 to initially relieve the pressure on the main RAF station on the island, and has since grown into a forward thinking training unit. However, back in October 2015 the RAF base was subject to many reports when 114 refugees landed at the British Sovereign base; a critical front line station for the MOD and Royal Air Force.The BriefIn order to detect, deter and delay any potential threat, the client had a number of requirements to meet the increasing level of security for the base.Increase protection of assets and personnel with their security fence line.Approved for Government Use fencing system.Provide a robust solution to stand up against the rigours of daily life and exposure to harsh aviation fuels.

When Financial IT Consultancy firm PHI Partners took possession of two run-down offices in Barnet, Hertfordshire, they tasked Interior Property Solutions (IPS) with combining the units to create a luxurious, bright and inviting executive workspace and 'Engine Room’ sales office fit for a cutting edge business.IPS wanted to create a bold impact with their door designs and choose floor to ceiling wood veneer doors, door frames and timber-framed partitions from Forza Doors.To create a unified consent look throughout the suites crown cut Black American Walnut veneer was selected for its close match to the grain of the table and AV unit in the executive meeting room. To ensure the veneers matched, Forza was sent a sample of the desk veneer and personally selected the veneer to match. We also used the same veneer on the doorframes and the Forza Imola partitions for continuity of colour and grain.