"concrete curers hardeners seals"

The Scope of the project was to provide a structural waterproofing solution to a private dwelling with new build extension.The property, situated on a sloping site gave the opportunity for the waterproof design to utilise the properties environment to allow for natural discharge of any potential water ingress.The property was detached and retaining to the front and side elevations where the retaining ground slopes down and away from the property to a garden that continues to slope down to a small stream. The retaining walls on either elevation rise at their highest point to approximately 1500mm above the internal floor level.The internal walls of the property were original brick to the front and new cavity built concrete block. The floor to what was the original house is of solid concrete construction joining on to a newer block and beam floor construction.When designing the most appropriate waterproofing system to any given situation, various design factors require addressing such as (but not limited to), final use of the building, the grade of waterproofing requirement under the British Standard, structural considerations based on the form of construction and in some cases, satisfying the requirements of building warranty providers.

Location: LondonMain Contractor: Berkeley Homes LtdWest End Gate is a mixed-use development by Berkeley Homes Ltd on Edgware Road in London W2, near the prestigious neighbourhoods of Marylebone and Little Venice.The development comprises 844 apartments (including 175 affordable), 8 shops and a restaurant, along with a new public plaza and improvements to Edgeware Road Junction.The full OBEX CORTEX Class A Through-Wall System has been specified on this project, including fire-classified Breather Membrane, Vapour Control Layer, Interface Sealing Membrane system, and the Score'N'Snap Cement Board system.With each OBEX product carrying a Class A fire-classification, it puts this façade installation by OCL Facades Ltd at the pinnacle of full compliance and highest performance.Residential Apartments: 844Buildings: 8Storeys: 29

Delivering ‘the perfect flooring installation’ for luxury Crystal cruise ship, the Crystal Endeavour, has been achieved by flooring contractors.To guarantee the highest levels of aesthetics and durability, flooring contractors used Styccobond flooring adhesives and Stopgap 1200 Pro levelling compound.To install carpets, contractors opted for a dual bond system comprising Styccobond F40 and F3 adhesives. Styccobond F1 rubber latex adhesive was used to seal carpet edges to reduce the risk of fraying and fibre loss, maximising the longevity of the installation.Luxury vinyl tiles were installed using Styccobond F46 pressure sensitive adhesive, which provides instant grab to prevent tiles and planks from sliding as adjacent tiles/planks are laid into the adhesive. Prior to installing the LVT, flooring contractors used Stopgap 1200 Pro levelling compound to create a perfectly smooth and level subfloor surface.

To facilitiate their exciting BSc Paramedic Science course, the University of Surrey identified that they needed more practical training space for their students. By working alongside Scott Brownrigg Architects, Newton Specialist Contractor Advanced Basements, and the Newton Technical Team, an extensive existing undercroft was converted into three large, dry rooms that are ideal for the purpose.With an emphasis on practical elements, the exciting BSc Paramedic Science course at the University of Surrey needed a new, well-equipped training facility for its students at the Surrey Research Park, Guildford.Having identified a large existing undercroft for the purpose, the University consulted with Scott Brownrigg Architects, as well as the Newton Technical team and Advanced Basements in order to create a new, dry space.The extensive undercroft area was first separated into three large rooms, based on what each room was going to be used for. These were defined as:A live environment Paramedic Training room, with an existing concrete floor, concrete retaining walls, and blockwork internal wallsA storage area, requiring a new insulated floor, and with concrete retainng walls and blockwork internal wallsA plant room, requiring full internal waterproofing to the walls and floorConsidering that the existing structure was already quite robust, Newton and Advanced recommended an internal Type C Newton CDM System. This method of waterproofing is the most failsafe method, using membranes to capture the water, and sump chambers and pumps to collect and remove it. The pumps are also supported by a battery backup system for total security.Advanced Basements acted as the specialist waterproofing contractor and the waterproofing design specialist on this project, working alongside the architect and client to design the system, before providing a high quality installation.Furthermore, thanks to their early involvement, Advanced also took design liability for the project and guaranteed the installation for the client.

The newest stadium in London, at a capacity of 17,250, Brentford Community Stadium is the joint home of Brentford FC and London Irish. Many years in the making, the stadium forms the centrepiece of a mixed-use masterplan, offering residential accommodation and regenerative opportunities.Four stands bound by a triangular form – AFL’s distinctive design has been influenced by a uniquely shaped site. The 17,250 capacity stadium is surrounded on all sides by the M4 and two railway lines. Even with these restrictions, the bowl maximises seat capacity with exceptional views, creates a strong foundation for adjacent residential developments, and leaves room for future expansion.Environmental factors were a primary concern throughout the planning and construction process. The amount of reinforced concrete used in construction was halved when compared with the original scheme. Arup’s structural engineers also reduced the amount of primary steel by a third, further cutting embodied carbon and costs. Energy, noise and emissions levels are all well within the London planning framework requirements and the stadium has achieved a BREEAM Very Good sustainability rating.In order to meet planning requirements, a lightweight external envelope had to match the aesthetic appearance of concrete, requiring a mixture of soft varying tones and textures. A highly durable and resistant finish was also needed to suit panels installed at low level and in the pedestrianized areas around the perimeter of the building.Development work with the architect resulted in the selection of a superdurable powder coating applied to the VariAL-TF panels, designed to imitate the appearance of concrete panels and offering additional protection to the facade panels, which benefit from superior colour stability and gloss retention, even in harsh environments.The panels were pre-routered on the rear, enabling flexibility in achieving tolerances of the complex angles on site. This enabled the installers to adjust individual panels as required on site.

Crown House, Barking, LondonThis project consisted of over 550,000 brick slips, including bespoke headers, pistols, and reveals. A choice of two brick types was selected for this project, both from our core range of products, the Mystique and the Rustington Antique.Client - Thorp precastBrick Types - Mystique, Rustington AntiqueProject timescale - 6 monthsConstruction Method - Pre Cast Concrete

Owatrol Oil is a product that wears many hats; it is a rust inhibitor, a paint conditioner and it also helps adhesion of finishes.Owatrol Oil is a versatile, highly penetrating air drying oil and when used as a rust inhibitor, it provides a tough, flexible finish, driving out excess moisture and air; displacing it from rusted metal, stopping rust from doing any more damage.Using Owatrol Oil as a rust inhibitorOwatrol Oil penetrates deep, through the rusted metal to the good metal underneath, isolating it and protecting it from further rusting.As it is a penetrating oil it can be used directly on the rusted surfaces. However, be sure to remove any loose flaking rust, paint, grease or any other contaminants before applying Owatrol Oil.ApplicationUsing Owatrol Oil on new clean steelFirst prime new steel with a mix of 1 part Owatrol Oil to 3 parts primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Using Owatrol Oil on lightly rusted surfacesFirst prime the surface with a mix of 1 part Owatrol Oil to 2 parts primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Using Owatrol Oil on new unpainted rusty steelFirst prime the surface with a mix of 1 part Owatrol Oil to 1 part Primer. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Using Owatrol Oil on old, severely rusted or previously coated surfacesApply wet on wet applications of Owatrol Oil to all exposed rust until fully saturated and allow it to dry.Saturation is indicated by a uniform glossy appearance to the surface when Owatrol Oil is dry.Before Owatrol Oil has hardened, check the surfaces and remove rust scale and old paint loosened by the above. If needed, touch up these areas.Allow to dry.Next, apply a mix of 1 part Owatrol Oil to 2 parts primer and allow to dry. Then follow with normal paint system adding Owatrol Oil to subsequent coats as directed under ‘Mixing instructions’ on the Owatrol Oil product page.Note: Owatrol Oil will not lift well bonded paint.

For the beautiful penthouse atop one of the buildings in South Bank Place, located next to the London Eye, the designers wanted a feature floor with a bespoke colour finish. We worked with the designers at Goddard Littlefair and decided on the timeless design of the Versailles parquet pattern. The designers wanted a show-stopping colour for this floor. We created the Belvedere colour finish; using a mixture of fumed, European Oak and pigmented hard wax oils to create a dark colour tone with red and golden highlights.To ensure a uniform and quick installation on site; we creating metre square panels with the Solid Oak Versailles pattern positioned by hand onto Birch plywood backing. Having discussed the fit-out process in detail with the fit-out team from SJ Eastern Joinery, we grooved all four sides of the panel and supplied the tongues loose. This gave the fitters flexibility to lay the boards as they saw fit on site. Once we had assembled the panels, the bespoke colour finish was applied; after completing multiple coats the panels were stored to fully cure and harden.Once the team from SJ Eastern had fitted the flooring on site, they protected it with a soft breathable cover and topped that with hardboard and taped the edges. This allowed the other trades to snag without damaging the floor. Once snagging was complete, the floor protection was removed. As anyone who has been on a building site knows, dust and debris are everywhere and sure enough the flooring needed a final clean and buff with oil to increase the lustre and make it perfect for the wow factor needed in such a stunning project.The expert team lead by Bardhyl Miskiqi of BRB Flooring came in and cleaned the floor thoroughly, removing plaster dust and other debris by vacuum and cleaning the floor down using a solution of Blanchon Natural Soap and hot water. Once the floor was suitably clean, they applied Blanchon Hard Wax Oil Satin on to the floor and buffed a coat into the floor using a buffing machine equipped with a white buffing pad. This fed the Oak another coat of oil which bolsters the protection against every day use and increased the lustre of the wood highlighting all the colours from that bespoke colour that had been applied at the factory.Once the oil was properly buffed in, the penthouse door was closed and the floor left to dry and cure. Once curing had completed the furniture was placed in the room and made ready for viewing by the client and new owner and a lifetime of happy memories.Please call 01666 504015 for more information.

For the beautiful penthouse atop one of the buildings in South Bank Place, located next to the London Eye, the designers wanted a feature floor with a bespoke colour finish. We worked with the designers at Goddard Littlefair and decided on the timeless design of the Versailles parquet pattern. The designers wanted a show-stopping colour for this floor. We created the Belvedere colour finish; using a mixture of fumed, European Oak and pigmented hard wax oils to create a dark colour tone with red and golden highlights.To ensure a uniform and quick installation on site; we creating metre square panels with the Solid Oak Versailles pattern positioned by hand onto Birch plywood backing. Having discussed the fit-out process in detail with the fit-out team from SJ Eastern Joinery, we grooved all four sides of the panel and supplied the tongues loose. This gave the fitters flexibility to lay the boards as they saw fit on site. Once we had assembled the panels, the bespoke colour finish was applied; after completing multiple coats the panels were stored to fully cure and harden.Once the team from SJ Eastern had fitted the flooring on site, they protected it with a soft breathable cover and topped that with hardboard and taped the edges. This allowed the other trades to snag without damaging the floor. Once snagging was complete, the floor protection was removed. As anyone who has been on a building site knows, dust and debris are everywhere and sure enough the flooring needed a final clean and buff with oil to increase the lustre and make it perfect for the wow factor needed in such a stunning project.The expert team lead by Bardhyl Miskiqi of BRB Flooring came in and cleaned the floor thoroughly, removing plaster dust and other debris by vacuum and cleaning the floor down using a solution of Blanchon Natural Soap and hot water. Once the floor was suitably clean, they applied Blanchon Hard Wax Oil Satin on to the floor and buffed a coat into the floor using a buffing machine equipped with a white buffing pad. This fed the Oak another coat of oil which bolsters the protection against every day use and increased the lustre of the wood highlighting all the colours from that bespoke colour that had been applied at the factory.Once the oil was properly buffed in, the penthouse door was closed and the floor left to dry and cure. Once curing had completed the furniture was placed in the room and made ready for viewing by the client and new owner and a lifetime of happy memories.Please call 01666 504015 for more information or click the product image details below.

The ancient printing house of “De Vooruit” in the Center of Ghent, was completely stripped to only the ancient concrete supporting structure. From there the renovation to an ultramodern student home was to be made with steel, providing safe stairways, safe and easy to walk on platforms, as well as outside sitting areas for the students. This was all to be made in aesthetical harmony with other products, such as COR-TEN steel that was used in the project. This to create a modern look, aspiring to the students.The project criteriaPcP had to meet the criteria for a sustainable, durable product which was safe and comfortable to walk on. At the same time, the product needed to blend in well with the COR-TEN steel being used for other parts of the project, providing a modern look that would appeal to students. Another challenge was installing the new steel structure onto the existing concrete supporting structure of the original building.The solutionLannoo Konstruktie chose the OPTIMO® O2, Spiral treads – Type K and panels, as these high-quality products met all the stated requirements for the new student accommodation building. In addition, it was a bonus that the OPTIMO® O2 perforation is easy to walk on in all types of shoes, and is even suitable for outdoor furniture, such as tables and lounge chairs.“The strength-to-weight ratio of the PcP solution is very favourable. This was very helpful for us, as we had to mount the new steel structure onto the old concrete supporting beams. It was important to have a light but very strong panel and steps. PcP was ideal for this purpose.”– Christophe Lannoo, CEO, Lannoo KonstruktieThe resultThe ancient printing house of ‘Dagblad Vooruit’ in the centre of Ghent was completely stripped back to its concrete supporting structure. The structure was then developed to create ultramodern student accommodation using steel with safe stairways, safe and comfortable platforms as well as exterior seating areas for students. This work all harmonised aesthetically with the other building materials, such as the COR-TEN steel used in the project. The aim was to create a modern and inspiring student residence.Architectural steel platform and spiral stair treadsThe project lasted a total of five months from first production to final installation of the panels and steps. In total, 150 spiral K treads were used for three spiral stairs on the three-storey building. More than 100 OPTIMO® O2 treads were installed, together with almost 300 square metres of OPTIMO® O2 panels, both standard and customised. For Lannoo Konstruktie, it was a very attractive project to be engaged in, and likewise for PcP, which is used to projects which are more industrial in nature.

Radmat has supplied a comprehensive range of systems for 20 Fenchurch Street, AKA the ‘Walkie Talkie’, in the City of London. Radmat’s PermaQuik, ParaFlex and EshaUniversal roofing membranes were installed during the creation of the Sky Garden – one of the highest green roofs in the world, offering breathtaking views over the capital.Designed by world-renowned architect Rafael Vinoly and jointly developed by Land Securities and Canary Wharf Group, 20 Fenchurch Street is constructed with impressive sustainability credentials to achieve an ‘Excellent’ BREEAM rating. The 38 storey tower incorporates a vibrant garden spanning the top three floors which is open to the public and by appointment. Described as the terraced ‘hanging gardens of modern Babylon’, the fifth-of-an-acre garden utilises drought resistant Mediterranean and South African flowers, shrubs and ferns, in soil up to a metre deep. The gardens also provide Rosemary, Thyme and other herbs to three restaurants within the building.Now London’s highest public park, the publicly accessible roof gardens include a viewing area, terrace, café, bar and restaurant. For such a unique space, it was crucial that the roofing system chosen delivered thermal performance, watertightness and long-term reliability for the client – specialisms of Radmat products. Land Securities and Canary Wharf Group awarded the work to Radmat on the basis of the company’s established reputation and expertise in all types of flat roofing.For the pitched green roofs, sectioned into a series of individual 45° slopes, EshaUniversal waterproofing was specified as part of a Radmat roofing system that included insulation and drainage layer. Made from recycled materials and 100% recyclable – EshaUniversal proved ideal to meet the demands at this sustainable development.Offering an efficient and safe installation, EshaUniversal is ideal for green roofs. More durable than elastomeric roofing, the system is also weather proof, UV stable and offers flexibility, durability and high puncture resistance making it ideal for challenging applications.Project Manager, Paul Nelson, said: “We have installed waterproofing systems over the concrete decks from ground up to second floor level then levels 34, 35, 36, 37 and 38. This required our installations teams to make repeated visits to site, using both internal and external hoists for access; with work completed in March 2014.”“The inverted roof arrangement means the waterproofing is covered by insulation and either paving, ballast or planted medium,” he added. “Then there is also the sky garden at an angle of 45 degrees planted with trees and shrubs, which will be accessible to clients using the restaurant there.”For public-access terracing across levels 34-38 – as well as a series of applications on the Ground Floor, second floor and the concrete staircase – over 1,200m² of Radmat PermaQuik PQ6100 was applied. With an independently verified durability ‘for the lifetime of the building’ and a market leading guarantee, the liquid-applied PQ6100 waterproofing system delivers exceptional performance befitting of this unique build.On level 37, where visitors can enjoy 360° views of the capital, additional waterproofing was required following the installation of a glass internal cladding system. With the glass already in place and challenged by high winds and low temperatures, the fast curing, cold applied ParaFlex waterproofing system was specified. Suitable for application at temperatures below zero reliable sealing can even be achieved at -5°C. Utilising collaborative working practices and a responsive and interactive design process, Radmat have created a stunning waterproofing and green roof application of the highest standard. Radmat’s proven range of waterproofing solutions met all the client’s demands and has ensured that visitors from all over the world can enjoy this stunning venue for many years to come.

This "Mall", the largest in Kuwait, was thought of as a work of art, everything is cared for, and so are the ceilings. If you do not pay attention to details you might think it's concrete, but no, it's indeed Barrisol stretch ceilings that cover most of the center. Barrisol membranes offers as always a lot of advantages: The work time has been reduced The weight of the structure has been lowered Aesthetics is neat A feat only possible thanks to Barrisol.

20,000 sq ft of brand new ‘BREEAM® Excellent’ Class A office space in Union Street, London, offers the character and qualities of Bankside’s industrial past, whilst offering a beautiful environment for modern office life. Open plan interiors featuring exposed concrete soffit and walls, full height ‘factory style’ windows, Maple timber Bathgate raised floor panels, and ‘acoustic’ decorative timber.

With London’s new ‘Elizabeth Line’ open, Farringdon had been designed to create accessible, safe and comfortable spaces that people can move through easily and efficiently - with sound absorbing insulation playing a key role in minimising station noise for passengers and staff.The solution was the installation of ROCKWOOL RW3 Slabs 75mm thick incorporated in the perforated glass fibre and reinforced concrete tunnel linings of the platform and access areas.

Granite-look Paving was required for a large city-centre public realm scheme. Braemar, Tobermore’s premium concrete paving with the aesthetic appeal of natural granite provided the perfect solution.The £20m+ public realm regeneration has transformed Leeds City Centre into a World-Class Gateway to the city for bus users, pedestrians and cyclists. The contractor was delighted that Braemar was readily available in large quantities and short lead times.

Outdoor life tends to take place inside the perimeter of block buildings in towns and cities. An inner courtyard becomes the outdoor area of choice, shielded from the noise from the roads that surround the building. The Wright Place project involved the installation of 60 balconies that were also planned as design elements. Schöck Isokorb® type KS was used for both structural stability and thermal insulation.Precast balconies as design elementsA total of 300 Schöck Isokorb® elements – between four and six per balcony, depending on size – were installed in the building structure, with some welded to the reinforcement to prevent tipping during concrete application. The Isokorb® used was type KS from Schöck's standard range, which functions as a load bearing thermal insulation element, eliminating thermal bridges between reinforced concrete and steel structures and thus preventing mould formation at the critical joints. The Schöck Isokorb® allows steel and metalworkers to prefabricate to a large degree, thus reducing installation times to a minimum. Its superb load bearing capacity offers enormous scope for balcony design while ensuring outstanding structural stability.

Buildable"Glass Fibre Concrete (GRC) was identified early on as the ideal material for the project to achieve the desired civic aesthetic but also to avoid adding significant stress to the existing structure." - Nat Keast, Associate, Wilkinson-Eyre.DesignableThe project is an AJ Retrofit Higher Education & Campus Award 2023.The lightweight, three-dimensional GRC cladding panels featuring a stylisation of LSBU’s “sail” emblem give the building a welcoming, civic quality."We worked closely with subcontractor Tellings during the design phase to develop the three-dimensional panels, as well as vertical slats and horizontal bands. Alongside the 100% white bromo brick with white grout used for the existing concrete stair cores and shear walls, GRC helped change the perception of the building."We had to fight hard to keep the GRC through various value engineering exercises, but the university supported us and was able to appreciate the impact of the new facade." - Nat Keast, Associate, Wilkinson-Eyre.SustainableThe building has received a very good BREEAM rating and by retaining the existing structure, total embodied carbon is half of the RIBA 2030 Climate Challenge target benchmark.

Sika supplied a single-source warranty as part of a dual waterproof solution for a large, privately-built concrete basement to guarantee its long-term protection against the perils of damp and water ingress.The 153m2 basement was part of a new build house in Harpenden, Hertfordshire. A toilet, cinema room, games room and a plantroom are earmarked for the below-ground structure; therefore its long-term resistance to water ingress was paramount.

The Hepworth Gallery required access to their low pitched roofs to facilitate safe working at height when carrying out external glazing cleaning and general maintenance. The concrete design of the building resulted in a thin roof construction, so The Gallery needed to ensure that any systems installed were fit-for-purpose, fully tested and compatible. With such a prestigious and architecturally prominent building, it was imperative that the chosen system also suited the design of the building.

Housing corporation De Veste is always looking for the perfect home for their customers. In doing so, one of their main focuses is on the sustainability of homes and also creating awareness in the field of energy consumption, therefore the look and feel of their office mus also radiate this vision. That is why they have opted for sustainable Marmoleum Concrete throughout their canteen, lounge and offices. Using it alongside Flotex Vision Floral ensures the homely feeling of the housing co operation.

Enfield Town Park is a 9.5-hectare green open space in the heart of the Enfield Town, north London. Following a series of consultations with the public and park user groups, works were undertaken in to restore the lake, reinstate public access to it, repair the leaks, and add wildlife friendly features to the area. Furnitubes supplied two types of products to the scheme – concrete Blyth cube seating blocks and Parallel table and bench sets.

The design of the house specified an airtight and thermal efficient solution to meet Building Regulations. The brief for DGTS was to provide a highly insulated (U-Values for walls/0.11 and floors/0.13) envelope to the main steel frame structure and concrete beam and block floors to both ground and first floor level. The dwelling floor area was approx 700m² broken up into twelve rooms including a wet room, gym, media room and library.

The building was constructed using ICF blocks that are to have a rendered finish. Internally the ground floor is a concrete slab and the upper floor has timber posi-joists with the Lewis Deck and resilient strips laid above. 16mm underfloor heating pipes are then clipped into our new clip rail system with a free flowing screed then poured on top, 50mm thick. This then gives 20mm cover to the heating pipes, maximising the efficiency of the whole system.

The customer wanted to find a new tile that had a similar aesthetic look to the original clay tiles but also needed to ensure an economical overall installation cost. James Bros Roofing Contractors, who specialise in the re-roofing of domestic properties using natural slate, clay plain tiles or more modern concrete tiles, selected Wienerberger's 20/20 Antique Slate roof tiles to achieve this brief perfectly.

The Bridgewater Hall in Manchester is a 2400 seat concert hall constructed in close proximity to the cities Metrolink tramway. Ground-borne vibration caused by passing trams was highlighted by Arup as going to cause unwanted structural noise within the performance space. To avoid this the building was constructed off 280 number GERB pre-stressable coil spring bearing assemblies positioned on the concrete column heads and tuned with a vertical natural frequency of 3.5Hz.

Specialist lighting design company PSL, were looking for something a little different for their trendy new Bermondsey showroom. Designers, James Plumb obliged with a beautifully crafted and truly unique design that involved much concrete and some special stainless steel kitchen units from GEC Anderson.Drawer cabinets, base cabinets and appliance doors were supplied and installed by GEC Anderson, following the development of the detailed designs.

DescriptionLocal Smet Supported Partner, a seasoned Lidl Contractor, McCallion Group machine applied the LIDL External Render System onto Poroton blocks externally using as Base Coat: Bauprotec 850 M – Lightweight Lime Cement Render, and as Key Coat: Change of substrate concrete/steel pillar/Poroton block or mass concrete and insulated plinths: Bauprotec RHS Multi-Purpose Render.The internal Render System specification onto Poroton blockwork consists of a base of Coat: Bauprotec 850 M, Lightweight Lime Cement Render, sponge floated in warehouse areas, and skim finished in sales areas. Key Coat: Change of substrate concrete/steel pillar/Poroton block: Bauprotec RHS is used.The Irish LIDL render spec, available from SMET consists of:Bauprotec 850 M is a factory-produced Lightweight Lime Cement Render, specially designed for machine or hand application produced to EN 998-1: 2010 and is CE Marked.Bauprotec RHS is a CE Marked, factory-produced highly polymer-modified render specially designed for hand and machine application produced to EN 998-1: 2010.The special render properties; lightweight, low thermal conductivity, high yield, and the Smet Supported Partner superior technical backup, are key factors in choosing SMET.SMET is committed to delivering consistently superior quality, German-made Render Systems to Lidl Plastering and rendering/plastering contractors across the UK and ROI.  If you’d like to speak to us about your Lidl job – contact SMET.All LIDL spec SMET Render System products are available directly from Smet Building Products Ltd, which ensures the contractor has a superior level of technical backup in the machine application of the LIDL specification.Related DownloadsTDS CASEA Bauprotec 850 M – Lightweight Lime Cement RenderTDS CASEA Bauprotec RHS – Multi-Purpose Render

PROJECT OVERVIEWHaving a strong reputation for developing innovative design-led partitioning solutions, Norwood was given the challenge of creating an acoustically sealed teaching pod areas within the iconic Round House grade II listed building at Derby College. The project was commissioned in consultation with Bowmer & Kirkland and Maber Architects.OUR SCOPE OF WORKWe demonstrated our ability to introduce fully demountable and relocatable teaching pods into a grade II listed building, with the benefits of their obvious stunning visual and acoustic appeal. Whilst the solution emphasises the importance of using a design-led partition solution partner, our on-site manufacturing facilitates allowed delivery of finished materials direct to site, thereby minimising on-site disruption. Furthermore, the incorporation of electrical and mechanical equipment within the partition design was a significant to the overall project finish. We provided our Mediline solid and glazed partitions, PodSolve, doors and walk on ceilings.

78 St James Street, a very special office refurbishment in the heart of London’s Mayfair, has involved a slew of skilled and experienced contractors to make the Grade II* Victorian building a commercial space fit for 21st century working while retaining the building’s magnificent fabric. Halifax Glass has used Hodgson Sealants’ U9 silicone for sealing the building’s impressive timber window units.  The windows, which are the full height of the storeys on the front façade, required a specialist glazing company to meet the demands of the project. Halifax Glass has many years’ experience in creating architectural glazing solutions and was called in to produce and install the windows at St James Street using Hodgson Silfix U9 Silicone Sealant for the job.  Halifax Glass also used quantities of Hodgson’s Flexistrip, the market-leading load-bearing security glazing strip for installing double glazed units, laminated glass and single glass into windows and doors.

Facing the necessity of establishing a functional serving window for seamless paperwork exchange with drivers, our client sought to upgrade from their standard UPVC residential-style window. Recognising the limitations of the existing setup, we proposed a tailored solution to meet their specific operational needs.In response, we engineered a robust commercial-grade aluminium horizontal sliding window, meticulously designed to streamline the paperwork exchange process. This innovative window system allowed for effortless sliding, enabling staff to quickly and efficiently pass documents to drivers with ease. Unlike traditional push-out UPVC windows, which were ill-suited for regular use in such contexts, our solution featured enhanced locking mechanisms and draft sealing, ensuring optimal security and insulation. By prioritising durability, functionalist, and user convenience, we provided our client with a vastly improved window solution perfectly tailored to their operational requirements.

The Scottish Salmon Company is the leading producer of quality Scottish farmed salmon operating across the West Coast of Scotland and Hebrides.The Scottish Salmon Company is the leading producer of quality Scottish farmed salmon operating across the West Coast of Scotland and Hebrides. The company required upgraded door systems at their processing facility in Stornoway. Dortek supplied Novosprint high speed doors and Metaflex sliding chiller doors to facilitate the segregation of production areas for hygiene and temperature control. The short opening and closing times of the Novosprint door which has speeds of up to 5 m/s, was used to help improve hygiene and operational efficiency, prevent unnecessary heat loss, and significantly reduce energy costs. The Metaflex sliding chillers doors were specified due to their airtight seal which eliminates draughts or leakage. The door also has a hygienic finish for food safe environments and automatic operation for easy access.

A scheme designed by the award-winning Architects Guy Hollaway, The Urban Sports Park in Folkestone includes the world’s first multi-storey skatepark. The state-of-the-art facility is set on four levels and includes a skating area, climbing wall, new boxing club and café. Cordek were requested to design and supply a bespoke formwork solution to aid the construction of the integral, reinforced concrete slab soffit for the large skating bowls on the first floor.

The Curzon Cinema in Oxford, part of the Westgate Shopping Complex, features a unique Arturo Performace Resin Floor in its bar area. Installed by 3D Royal Floors, the 271 m² floor combines aesthetic appeal with durability, essential for heavy foot traffic and furniture movement. The dark grey 'concrete look' created a unique and attractive floor. The seamless flooring enhances the venue's contemporary atmosphere, providing patrons with a stylish and comfortable environment.

We have overcome the challenge of installing low channels in an existing reinforced slab at the southern entrance to the French station.We have supplied mini range polymer concrete shallow drainage channels. This range is specially designed for areas with height limitation and load classes up to C250. Since this specific case involved a pedestrian tunnel, channels with heel-proof grates that comply with PMR regulations for people with reduced mobility were installed.

Armourcoat’s modular panel system ArmourFX has been specified to stunning effect at the new G-Shock store on London’s Carnaby Street by Double Retail. The new flagshop concept store was designed to physically interpret the core values of the brand and clearly segment G-Shock’s extensive product range.Through the careful use of lighting and materials, such as slate flooring, hot rolled steel surfaces and concrete wall panels from ArmourFX,the environment is an embodiment of G-Shock toughness.The store has elevated this premium offering and created a versatile future-proof space adaptable for specific collections and product launches.ArmourFX concrete effect panels are ideal for a deconstructed urban look for contemporary projects. The panels offer a wealth of design options to achieve a distinctive industrial style including distressed effects or recessed ‘shutter’ markings. Off-site construction is fast becoming the method of choice for both contractors and their clients with projects under tight deadlines for completion, or where it is impractical to work with ‘wet’ plastering trades on site. ArmourFX modular solutions can be highly customized to suit the client, sent directly to site and installed in a few hours. Photography: © Max McClure

Marlborough Sports Garden, a long-time community recreation space in London Bridge, has been regenerated and reopened, featuring unique hexagonal planters made from MEDITE® TRICOYA® EXTREME. Transforming the once graffitied concrete space into an urban oasis, the planters were a central feature at the official opening, attended by British Olympian Tom Daley and MP Jo Cox’s sister Kim, alongside her parents Mr and Mrs Leadbeater.