"circulation fittings signs etc"

Woolston Sixth Form College forms part of Woolston Learning Village, which also includes neighbouring schools Green Lane Special School and Fox Wood Special School. The college educates & supports students aged 16 – 19 years old who have a range of additional needs.Following the installation of a number of Twinfix canopies at Green Lane Special school over the last eight years, Twinfix were approached by Woolston College to design, manufacture and install canopies on two separate occasions over the last two years.The initial project involved fitting a twenty-five sqm canopy with vertical glazing to one of the classrooms at the site. The vertical glazing offered weather protection and an element of privacy for the students using the canopy.The College was so impressed with the process and the installed canopy that they requested a second canopy spanning thirty-two sqm a few months later.Both canopies have aluminium frames powder coated in blue RAL 5010. As this metal does not rust in use, they will keep their good looks throughout their long life. The structures comprise of Twinfix’s innovative Multi-Link-Panel Non-fragile (NF) roof glazing system fitted with tough 16mm opal multiwall polycarbonate. The NF denotes that these panels conform to the HSE’s recommended drop test ACR[M]001:2019, as recommended by HSG33.With safety of the students being paramount, protective foam pads were fitted to each supporting post to guard the children from bumps and bangs and anti-climb guttering was also included in the design for both structures.Not only do the new canopies provide additional safe space for students to play and learn, but it also enabled them to reap the benefits that come with being outdoors.

Hart Door Systems has worked with a number of UK water companies to improve site security and efficiency. In particular the need to secure remote and often unstaffed but vitally important sites. Water sites have particular needs which require reliable and secure doors and the engineering expertise that Hart offer.The challenge This Yorkshire Water had 3 existing un-secure horizontal doors. These manual operation doors had fallen into disrepair and presented a security risk. Automatic doors were required to provide efficiency and security. The solution The Hart solution was to install its roller shutters, fitted in a customised way to suit the environment and to ensure security, ease of installation and minimum disruption. One of the things Hart has significant experience in is fitting doors that add security features but without the need for additional structural works. Disruption was further minimised by working in collaboration with the main construction contractor, scheduling the work to fit in with not only the day to day operations, but other work happening concurrently.Because of Hart’s experience on sites such, existing vital operations were worked around – which continued during the removal of the old doors and installation of the new. The success Several more SR rated doors are planned at the same site, so that the company can replicate the success and the improved security that has been provided.Hart has gained invaluable experience working with various water companies installing high specification SR rated security shutters. These doors meet an established set of standards to prevent unauthorised access and have been tested and shown to minimise the threat of certain intruder attacks.For those sites that need constant access by people and / or traffic, the Speedor brand of doors can provide additional high speed operation. Speedor and SR doors can be used in combination to give complete flexibility and the best of both worlds.

Network Rail’s nationwide initiative for high specification, durable AFA platform access bridges required AATi to supply re-engineered ‘Coverall’ combined stair nosing and step covers. These small design changes have again improved bridge construction techniques and the long-term performance of the stairway, and removed dirt-traps and improved drainage. AATi supplied their SN293 WL307 UR to fit the needs.

At the heart of the new Pontoon Dock development is the ‘Royal Wharf Medical Centre’. As part of the internal fit-out package we were included for the supply of bespoke internal Fire doors, Screens and Architectural Ironmongery.Laminate door-sets were chosen to provide durability and great aesthetics. With A.W.Oak Linings and screens a great overall appearance was achieved that fully complies with the stringent requirements of a demanding environment.

Berlin's new Waldorf Astoria Hotel next to the “Kurfürstendamm” – the first in Germany – continues the Renaissance of the old western part of Berlin. However there remains a clear commitment to the modern spirit. All rooms including conference rooms had to meet to the highest requirements and systems from Silent Gliss could fulfil those high expectations in all areas. Fitted with Silent Gliss Panel Glide systems.

In 2016 we were contacted by a large hotel to come up with a cost effective way of screening 60 windows to prevent insects from entering the building. We decided the box screen would be perfect as it offers ventilation and does not restrict the window from opening fully. The fitting took 3 days, the customer was happy and the screens are still as sturdy today as they were 2 years ago!

The Quadro wooden loft ladder is the solution when ‘standard’ is simply not good enough. It is supplied as an easy to fit, made-to-measure unit. The 3-part folding wooden ladder is contained within, and attached to, a laminated wooden hatch box and an insulated trapdoor. The Quadro wooden loft ladder offers very good energy efficiency thanks to an insulated trapdoor with an airtight 4-point locking mechanism.

At Heathrow Primary School, their mission is to provide a safe, happy, caring and inclusive environment.The Kids Stuff cubicle range was specified in High Pressure Laminate (HPL). It was important that the chosen washroom design was safe, reliable and easy to maintain for the staff. The washrooms included semi-recessed vanity unit to the children’s height which fitted in perfectly with the rest of the project. Read the whole case study on our website.

Sparsholt's continued growth over recent years meant that a new sports hall was required to enhance their sporting facilities. The new building included a four badminton court hall along with a modern Dance/Aerobic Studio and extensive Fitness Suite. The majority of the work was completed using the area elastic Komfort Plus sprung sports flooring system finished in Tarkett solid Sports Vinyl.

In 2016, the company built a 14,000 sq m contemporary, headquarter office building in London, which would allow their business to grow whilst remaining in a town that has been home to the company for many years. Subsea 7 required a high quality, innovative washroom that would complement the extensive and dynamic building. Working with ESA Architecture, Dolphin advised on the most fitting washroom solution.

81 Piccadilly, London, as a project presented a unique opportunity for Komfort to showcase their extensive product range and design capabilities in a complex commercial interior fit-out. The project was executed under a design and build contract, with Thirdway as the main contractor and Level Best Solutions as the sub contractor. Komfort being selected as the preferred partner due to their reputation for flexibility and their wide range of high-quality partition systems.

Fitting a ceiling hoist in an operating theatre makes it easier for staff to do their job and improves patient safety. However, the presence of other ceiling-mounted equipment is one reason why so few operating theatres in Denmark have ceiling-mounted hoists.The Regional Hospital in Horsens is now installing ceiling-mounted hoists in all the operating theatres in its new surgical department.

During Phase 1 of the project, Big Yellow worked alongside Hollis Global, real estate consultants, and Welbro, specialists in the refurbishment of industrial buildings. Hollis was responsible for the project management and successful installation of the PV system by EvoEnergy. After concluding the roofs were not fit for solar in their current condition, Hollis introduced Sharmans roof refurbishment systems to bring the roofs back up to standard.

Royal Blackburn Hospital in Lancashire has benefited from a range of timber doorsets fitted with complete ironmongery specified by ASSA ABLOY UK Specification, a UK division of ASSA ABLOY, the global leader in door opening solutions. These robust timber doorsets are not only delivering assured safety and access at the site, but improving whole life costs too... Click on the link below to read more.

Chamberlain, based in Edgbaston, is a brand new student accommodation development comprised of a 21-storey tower and three low-rise blocks. The student rooms have been fitted with the Aperio® solution, which required full integration into the Gallagher Command Centre, which is an industry leading critical business platform, delivering organisational security and operational continuity... Click on the link below to read more.

With the client looking to achieve a fully hygienic, long-lasting finish it was only natural to incorporate BioClad’s full suite of products throughout the facility. Working with the client, it was evident that time was an important factor in the project planning process. The 15 working day turn-around of BioClad’s BioPod unit appealed to the client alongside the bespoke design of the unit which can be manufactured to fit any specification.

For the beautiful penthouse atop one of the buildings in South Bank Place, located next to the London Eye, the designers wanted a feature floor with a bespoke colour finish. We worked with the designers at Goddard Littlefair and decided on the timeless design of the Versailles parquet pattern. The designers wanted a show-stopping colour for this floor. We created the Belvedere colour finish; using a mixture of fumed, European Oak and pigmented hard wax oils to create a dark colour tone with red and golden highlights.To ensure a uniform and quick installation on site; we creating metre square panels with the Solid Oak Versailles pattern positioned by hand onto Birch plywood backing. Having discussed the fit-out process in detail with the fit-out team from SJ Eastern Joinery, we grooved all four sides of the panel and supplied the tongues loose. This gave the fitters flexibility to lay the boards as they saw fit on site. Once we had assembled the panels, the bespoke colour finish was applied; after completing multiple coats the panels were stored to fully cure and harden.Once the team from SJ Eastern had fitted the flooring on site, they protected it with a soft breathable cover and topped that with hardboard and taped the edges. This allowed the other trades to snag without damaging the floor. Once snagging was complete, the floor protection was removed. As anyone who has been on a building site knows, dust and debris are everywhere and sure enough the flooring needed a final clean and buff with oil to increase the lustre and make it perfect for the wow factor needed in such a stunning project.The expert team lead by Bardhyl Miskiqi of BRB Flooring came in and cleaned the floor thoroughly, removing plaster dust and other debris by vacuum and cleaning the floor down using a solution of Blanchon Natural Soap and hot water. Once the floor was suitably clean, they applied Blanchon Hard Wax Oil Satin on to the floor and buffed a coat into the floor using a buffing machine equipped with a white buffing pad. This fed the Oak another coat of oil which bolsters the protection against every day use and increased the lustre of the wood highlighting all the colours from that bespoke colour that had been applied at the factory.Once the oil was properly buffed in, the penthouse door was closed and the floor left to dry and cure. Once curing had completed the furniture was placed in the room and made ready for viewing by the client and new owner and a lifetime of happy memories.Please call 01666 504015 for more information.

For the beautiful penthouse atop one of the buildings in South Bank Place, located next to the London Eye, the designers wanted a feature floor with a bespoke colour finish. We worked with the designers at Goddard Littlefair and decided on the timeless design of the Versailles parquet pattern. The designers wanted a show-stopping colour for this floor. We created the Belvedere colour finish; using a mixture of fumed, European Oak and pigmented hard wax oils to create a dark colour tone with red and golden highlights.To ensure a uniform and quick installation on site; we creating metre square panels with the Solid Oak Versailles pattern positioned by hand onto Birch plywood backing. Having discussed the fit-out process in detail with the fit-out team from SJ Eastern Joinery, we grooved all four sides of the panel and supplied the tongues loose. This gave the fitters flexibility to lay the boards as they saw fit on site. Once we had assembled the panels, the bespoke colour finish was applied; after completing multiple coats the panels were stored to fully cure and harden.Once the team from SJ Eastern had fitted the flooring on site, they protected it with a soft breathable cover and topped that with hardboard and taped the edges. This allowed the other trades to snag without damaging the floor. Once snagging was complete, the floor protection was removed. As anyone who has been on a building site knows, dust and debris are everywhere and sure enough the flooring needed a final clean and buff with oil to increase the lustre and make it perfect for the wow factor needed in such a stunning project.The expert team lead by Bardhyl Miskiqi of BRB Flooring came in and cleaned the floor thoroughly, removing plaster dust and other debris by vacuum and cleaning the floor down using a solution of Blanchon Natural Soap and hot water. Once the floor was suitably clean, they applied Blanchon Hard Wax Oil Satin on to the floor and buffed a coat into the floor using a buffing machine equipped with a white buffing pad. This fed the Oak another coat of oil which bolsters the protection against every day use and increased the lustre of the wood highlighting all the colours from that bespoke colour that had been applied at the factory.Once the oil was properly buffed in, the penthouse door was closed and the floor left to dry and cure. Once curing had completed the furniture was placed in the room and made ready for viewing by the client and new owner and a lifetime of happy memories.Please call 01666 504015 for more information or click the product image details below.

Project: Creative Centre, York St John UniversityClient: Tate+Co ArchitectsScope of project: Design and supply 24 bespoke-sized rooflights for the roof of a triple-height atrium to fit within apertures in a glulam timber grid.Products: 24 bespoke sized em.glaze rooflights, some with concealed actuator smoke ventsThe ChallengeThe roof of the striking 14m, triple-height atrium, which forms the centrepiece of the newly opened Creative Centre at York St John University, features a glulam timber roof grid. Architects Tate+Co wanted to punctuate that grid with bespoke sized rooflights to bring even more light into a space which is used as an exhibition, teaching and theatre space, as well as somewhere for students to mix and relax. The rooflights had to have a sleek, minimalist aesthetic, in line with the overall design intent of the atrium and, because almost all the services in the atrium are hidden, needed to be available with matching concealed actuator smoke vents.The SolutionWhitesales designed and supplied 24 bespoke-sized em.glaze rooflights which suited the specification perfectly. The flush-glazed glass-to-edge design of the em.glaze units with flat sealed glass units fitted within a fully welded, thermally broken aluminium frame achieved the lean, crisp look the architects were looking for. The fact that they were also available with fully concealed actuators in the smoke vents supplied by our affiliate business Sertus was an added bonus. All the rooflights were supplied for the project complete with preformed 300mm PVC splayed upstands, which enabled them to be fitted directly into the glulam grid, saving the contractors time on site. They were also fitted with specially coated glazing which allowed for a degree of solar gain and contributing to the low energy requirements of the BREEAM Excellent rated building.‍The BenefitsAs well as the meeting the design specification, Whitesales’ technical team helped to ensure that the em.glaze rooflights could be installed quickly and efficiently by the main contractors Kier Construction. We estimate that our recommendation to supply the units with preformed 300mm PVC splayed upstands saved the roofing team at least two weeks on site because they didn’t have to construct the upstands themselves and the integrated splay made waterproofing the roof a lot easier. Tate+Co Director Andy Baker-Falkner is delighted with the em.glaze units: “We liked the lean, crisp design of the Whitesales em.glaze units, particularly with the clean white reveal and option for fully concealed vent actuators.”

Working with Kier Construction, BOYCO successfully transformed this secondary school's changing room spaces.Project ScopeNorth Chadderton School in Oldham, is renowned for providing a supportive, and creative learning environment. The school was challenged with needing to create additional space for students, sparking a new construction project.Team BOYCO proudly worked with Kier Construction, to help transform the newly developed learning spaces at the secondary school. Part of the Oak Trust, BOYCO supported the school’s expansion project with the design, manufacture and install of a range of changing and cloakroom furniture.The BOYCO WayBespoke DesignTeam BOYCO’s in-house design and project management teams worked closely with the Architects drawings, designers at Kier Construction, to gain a comprehensive understanding of the task at hand. We collaborated closely to create designs that showcased a range of BOYCO’s market-leading changing and cloakroom furniture that seamlessly integrated with the school's aesthetic.Our Peg Rails, Island Bench Units, and Wall Fixed Bench units were carefully chosen to maximise space, whilst meeting the practical needs of both students and staff.Quality ManufacturingFrom our factory in Greater Manchester, we ensured that every piece of furniture was crafted with precision using high-quality materials. The durability of the furniture was a key consideration to withstand the daily demands of a bustling school environment.A bespoke requirement from North Chadderton, was that Oak timber was used. This was a symbolic request from the Secondary School, as they wanted showcase being part of the Oak Trust.BOYCO also acknowledged that the cloakroom furniture would be a frequently used, with placement in a high touch point communal area.Therefore, as per all BOYCO timber, the Oak is coated with anti-microbial lacquer which is formulated to stop bacteria from surviving on the surface – preventing the spread of 99% of known bacteria. This is a suitable fit as it supports a clean and safe learning environment.All metalwork to the Benches, Units, and Peg Rails are coated with our unique ‘Hot Dip’ nylon. This also provides anti-microbial protection and is 500x more abrasion resistant than the next powder coating, a great match for the school’s changing room.Expert FittingBOYCO provided a full fit out service to complete this project. Our expert team of fitters worked to exceed expectations and meet tight timescales, completing the full fit out of all spaces during the schools Christmas Holidays. This ensured that the new learning spaces were ready for when students returned in the New Year.Project Success99% satisfaction score from Chris Gregory, Project Manager at Kier Construction.

Our purposeOn behalf of Amye Defence Services, Acclaim Contracts Ltd was commissioned to address the aging roof of the building, which was leaking despite receiving patch repairs over the past 20 years. The Ministry of Defence’s Project Allenby/Connaught demonstrates the Government’s commitment to maintaining defence estates.The £1.45bn scheme is a 35-year commitment to providing modern, high quality, fully serviced, purpose built living and working accommodation for 18,700 soldiers. It involves the new build and refurbishment of more than 550 buildings across Salisbury Plain and Aldershot, including upgrading Allenby’s Building 51, otherwise known as the Sports Pavilion.Our solutionAcclaim turned to Langley to provide all the material necessary to complete the work. After stripping the original roof to the existing plywood deck, the team fitted new treated timber around the perimeter and new uPVC fascia. The current edge trims, perimeter check kerbs, and extended flues were removed to ensure regulatory 150mm clearance was achieved once the new roof covering was installed. Langley’s HT180 attachment layer was loose-laid and nailed into place to provide appropriate protection to the timber deck while the “hot works” above were undertaken. Langley’s TA-20 Flat Roofing System was installed across the roof area, with insulation to achieve the regulatory requirement of 0.18W/m2K. SA-20 Flat Roofing Detailing System was used in fire risk areas, in line with Safe2Torch guidance. The range of Langley’s TA systems complies with Broof(t4) classification and has a Local Authority Building Control (LABC) assured accreditation. Under MOAT 31, Langley’s Parafor 30 GS (cap sheet to the TA system) achieves a ‘resistance to damage” rating of R4. It is independently certified by the BBA to deliver a life expectancy of at least 40 years, one of the longest available in the UK.Acclaim fitted Langley’s ParaFurb Refurbishment Outlets to upgrade the internal outlets where possible, cleaning and priming those where the design precluded the use of ParaFurb. We installed New Code 5 lead pipe sleeves to flues and hot pipes to a minimum 150mm above the waterproofing. In addition, Langley’s ParaTrim GRP Edge Trim was fitted to all the kerbs.“It carried great weight with us that Acclaim worked in partnership with Langley, who offers an independent insurance-backed guarantee. That is indicative of pride and confidence in its work, giving synergy with Amey. It also gives us, and our client the Ministry of Defence, that the refurbished estate at Allenby will serve and be fit for purpose for decades to come.”Will Loates, Service Delivery Area Manager, Amey

D-marc 105TM demarcation system – a collective protection demarcation solution. The doctrine “prevention is better than cure” is one that rings true in so many instances. Common sense tells us that it much better to prevent a fall than it is to arrest the fall once it has occurred. The Working at Height Regulations (WAHR’s) 2005 reinforce this argument. Whilst in many instances it is not always practical to remove the risk of a fall; rainwater outlets will always require cleaning, rooftop plant will require regular maintenance etc.. there are a number of ways to protect the worker from the immediate hazard the fall presents. The simplest way and that which much closely echo’s the doctrine “prevention is better than cure” is to keep the worker away from the fall hazard. The most effective way of achieving this and that which is advocated by the WAHR’s is through the provision of a Collective Protection solution. A collective protection solution is one which will “collectively protect all those who access the area”. In a rooftop situation where the hazard is a fall from the roof edge, Collective protection can be achieved by raising the parapet or through the installation of a full perimeter guardrail. Alternatively the worker can be kept a safe distance from the roof edge through the installation of a demarcation system. –Health and Safety in Roofwork HSG 33 states that “where work is not done at the edge, demarcation barriers can be provided at a safe distance from the edge (usually at least 2 meters), e.g. work on an air conditioning unit in the middle of a roof.”.      An example of where The D-marc demarcation system has recently been specified and installed at Crown Woods College, Eltham to provide safe access to rooftop mounted plant. The client was looking for a solution that would;Provide a collective protection solutionNot penetrate the existing roof covering and therefore not compromise the roofs waterproofing or air-tightness.Be lightweight so as not to require an additional support structure.Provide easily identifiable access routes ensuring no exposure to fall hazardsBe low maintenance and ideally have good environmental credentials.  D-marc was able to meet all these criteria and has the additional benefit of giving the customer the piece of mind that whilst it does not rely upon any means of mechanical fixing to the roof structure, it is tested to withstand wind speeds in excess of 105 mph. Such testing is a requirement of BS6399-2 Code of Practice for Wind loads which states that all components that form a building are required to withstand a 1 in 50 year wind speed.   D-marc was used extensively on the project as part of the collective protection demarcation system to create clearly defined safe access routes across the roof to theplaces requiring regular maintenance work. Having created the safe routes to the places of work, the D-marc was then used to demarcate the safe working zones upon the roof top. To ensure a complete collective protection solution was provided in isolated areas where it was not possible to keep the worker away from the fall hazard a guardrail was used. The easy to install, non penetrating D-marc system creates a clearlydefined access route and a safe working zone for all those undertaking regular rooftop maintenance works.

Accoya selected for the renovation of the GeoSouthern Energy’s corporate headquarters. Distributed by Mason’s Mill & lumber, the Accoya cladding was milled into a Vanish Rain Screen profile with a walnut stain for the exterior of the building. Various sizes of Accoya were used ranging widths between 5”-8”. In total 80 m3 of Accoya was used for the project. Accoya was chosen due to its stability & durability making it the perfect fit for designers Kirksey.

Extensive use of parapet capping from the Pendock Linea building linings range has helped improve weather resistance and aesthetics at a modern student accommodation building in Kingston-upon-Thames.Bespoke manufactured from high quality aluminium with a grey PPC finish, the flat PC-F style parapet capping's are fitted to the entire building to improve the integrity of the flat roof and stop the ingress of water.

The second tallest building in the United Kingdom, and tenth largest building in the world is home to an impressive amount of BLÜCHER EuroPipe! All 62 floors are equipped with stainless steel drainage, from RWP, SVP and food vacuum systems to interceptor foul drainage and disconnecting traps for rainwater.The project spanned over two years, and it was a no brainer that our lightweight, adaptable and push fit system was chosen as the sole supplier.

A dated conservatory area is transformed by Breezefree with a retractable glass roof and polycarbonate curtain walling. Nagan Johnson Architects approached Breezefree to refurbish a dated conservatory area as part of the fit-out of the Cuban restaurant group’s second site in London’s Smithfield district. The brief required a modern retractable glass roof, to replace the old lean-to rooflight, and translucent curtain walling, to replace the dilapidated brick walls and windows...

ASF's Building Protection Corner Bollard was used in the above project. The bollard is set up so that there is one quarter missing on the upright plane so that it fits perfectly on a 90 degree outside wall. The pattern can be adapted to other angles if necessary. Once in place the bollard acts as a wheel buffer for any vehicles getting too close to the corner - thus reducing the risk of damage to either the building or vehicle.

Like many workplaces, a good cup of tea is a necessity for the staff at Wiltshire Council and, after years of faithful service from their older generation Zip HydroTaps, Wiltshire Council’s drinking stations were due a refresh. A new mains-fed drinking water system was required that could meet the hot beverage demands of all the council employees, at the same time as fitting the building’s energy saving criteria.

DescriptionModel: Vimec Easy Move cabin liftStops: 2  Type of building: Private House  Country: South Africa  The customer’s desire was to have a lift that would allow him to move around comfortably and stylishly. After an on-site talk with our partner, in order to fit well into his home design, the customer sought a modern and robust solution like Vimec Easy Move homelift.

Sophisticated and contemporary office designs means ensuring perfect and seamless integration to complement the space.The creative brief for this design focused on embracing the intricate architectural details of the space such as the natural shapes and overall industrial vibes.Vtec's SupaSlat System and MaxiBeam Systems were specified in this unique office fit out. With such large zones, the team achieved the precision that was required, with 3D modelling to ensure precise coordination, positioning and integration.

A satisfied customer has returned to Union Industries for the fitting of a second high speed industrial door to enable it to keep production noise to a minimum, while transporting raw materials and products in and out as efficiently as possible.Arbor Forest Products, the UK’s leading independent timber importer and processor, which is based in Barrow Upon Humber, offers a bespoke milling service with the ability to process orders in 10 days.

Procheck A2, the high-performance fire-resistant vapour control layer system from the A. Proctor Group has been selected as part of a £6bn regeneration project that will create over 10,000 homes in Enfield, London, over the next 20 years.Leading regeneration specialist Vistry Partnerships has been appointed for the first phase of the Meridian Water scheme working in partnership with Enfield Council. Meridian One will see the development of 1,000 new homes with a mixed tenure of private sale, private rent (PRS) and 50% affordable housing spanning 13 blocks ranging in height from four to twelve storeys. In addition, the scheme incorporates 2,235m2 of employment space and over 2 hectares of green, parkland and open space.Sam Bennett, Commercial Director at SCL LONDON, a Structural Framing Systems and Drylining specialist, commented.“Procheck A2 was selected because it has a Class A2 performance and excellent vapour-controlling properties. In addition, the membrane comes with a high vapour resistance and is airtight, allowing its use as an AVCL.This means that Procheck A2 provides high levels of airtightness which ensures the thermal efficiency of the building.”“Procheck A2 has an A2-s1,d0 fire classification to BS EN 13501-1, is considered limited combustibility and minimal contribution to fire, and therefore, conforms with the requirements for high rise construction (18m).” The superior performance of Procheck A2 from the A. Proctor Group is the perfect solution, delivering significant benefits to the combination of in-factory manufacture and on- site housing construction.Procheck A2 comprises a unique design consisting of a glass fibre backing with a pure aluminium foil and clear lacquer coating. It is this clear surface which provides Procheck A2 with the added benefit of a low emissivity surface, which, when used with a service cavity, can enhance the overall thermal performance of the building fabric, as well as ensure a high fire protection performance, with an A2-s1,d0 fire classification. Procheck A2 is designed to protect the building fabric from the potential risks of condensation whilst providing the added benefit of serving as an effective airtight barrier.Sam Bennett added,“the technical team at the A. Proctor Group supported us throughout and provided comprehensive installation guides giving vital information for both operatives and clients and helping with sign-off at specific hold points throughout the project.” Based on years of investigation, research and development, the A. Proctor Group can offer a superior range of technically advanced membranes to address the safe design of fire solutions in building construction.The installation of Procheck A2 will ensure a high level of protection throughout the building’s lifespan.

OVER 9,500M2 OF THE BRAND NEW OPTIMA FC+ ANODISED ALUMINIUM HAS BEEN USED IN THE AMBITIOUS COMPLETION OF KELATY HOUSE, A TOWERING STUDENT ACCOMMODATION AND HOTEL IN WEMBLEY LONDON.With three different surface finishes – matt, gloss and perforated – this stunning project brings together numerous wins for the Sotech team and their wider supply chain, not least the captivating tree designs visible on the finished project, created by specially perforated panels.As you can see from the pictures below, the perforated panels have been carefully orchestrated to form the highly original tree silhouettes, visible from quite a distance on the project, which is made up of five separate high-rise blocks.Standing back to view this building, an onlooker can’t help but look up and down the full height of the building, following the shape of the branches.Sotech manufactured hundreds of panels for the scheme on the Salvagnini automatic panel bender, achieving maximum precision. Before the first delivery was made to site in Spring 2020, the panels were stacked and shipped to Holland to be anodised by our anodising partner, Alumet, these were then returned to Sotech and shipped to site.Aluminium is one of the most durable and versatile of metals, anodising enhances aluminium and its environmental virtues. It is exceptionally recyclable, requires minimal maintenance and has proven lifetime performance. Due to the nature of the anodising process and the tight quality controls on both the aluminium and the surface treatment, anodising has a homogeneous (matching & consistent) appearance. Anodising enhances the natural qualities of aluminium further; it permits a strongly contemporary finish with incomparable corrosion and abrasion resistance.It has been a complicated project to complete, not least because of the logistic coordination, but also because of the challenges caused by Coronavirus and the lockdowns, both in the UK and on the world’s borders.All teams across the full supply chain, from material supply and manufacturing through to anodising and installation on site, everyone had to work closely together to follow the guidance, whilst keeping to tight project timescales.Sitting in the Wembley Park regeneration area, within the immediate vicinity of Wembley Football Stadium, Kelaty House will include 300 bed Apart Hotel and 600 bed student accommodation arranged within five separate buildings ranging in height from 4 to 13 storeys.The final delivery to site will be in March 2021, and we look forward to sharing final project images with you then. Be sure to sign up to our monthly mailer to be notified when final project images are available.

‘A little bit extra’, was the concept when creating the beautiful new spa garden at Pennyhill Park; a premium space, set within the luxurious spa grounds where you can switch off from the world and indulge in the very best.  Four Cabanas were key to the design, each providing clients with a private ‘pad’ for the day. The Cabanas had to offer all the benefits of being outside, with the comforts of being inside, allowing guests to enjoy the roll-top spa bath and loungers beneath in a pleasant environment throughout the day.  Our Deluxe Outdoor Living Pod was incorporated by the project designer thanks to its flexibility, in particular the ability to incorporate additional uprights and a wall to the rear and part side where the padded bench, fridge and coffee machine are all incorporated. Each module measured 5m x 4m providing ample space for the facilities within.  The motorised rotating louvered roof of the system allows guests to play with light and shade to create the perfect ambience beneath the structure from sunrise to sunset, whilst the optional integrated screens to the open sides can be deployed as required to provide privacy whilst also offering protection from low sun and even breezes.  Graham Copeman, General Manager at Pennyhill Park commented: “Our cabanas give guests the opportunity to indulge in the best, feel at their best, and relax in style. The ‘Deluxe’ Outdoor Living Pod™ design provides privacy and shade from above and on all sides with remote control blinds, whilst being beautifully adaptable allowing us to build around the space to create the perfect indulgent haven. Our vision was to bring the luxury of a hotel room to the great outdoors, which Caribbean Blinds seamlessly helped us achieve.” Close collaboration with the interior designer and facilities manager throughout ensured a smooth process, with fully detailed CAD drawings provided to ensure a seamless incorporation of the structures into the overall scheme, which was particularly important for the positioning of foundations and services. From drawing and design sign-off through to installation took just 12 weeks, with installation taking just 4 days to complete.  To find out more about how we can help you create unforgettable alfresco experiences 365 days a year please contact one of our knowledgeable and friendly team on 0344 800 1947, send us an email projects@cbsolarshading.co.uk or visit our website www.cbsolarshading.co.uk.

An al-fresco experience like no other; where you can relax and enjoy award-winning English sparkling wines alongside perfectly paired seasonal plates, with views over the growing vines and the South Downs beyond. That was the vision for Ridgeviews Rows & Vine Restaurant.  Being an outdoor only restaurant it was imperative that the space could be used in all weather conditions to ensure maximum revenue year round. Therefore as part of the design a series of canopies were incorporated on the zoned terraces along with adjacent to the bar area to provide diners with a comfortable space to enjoy the iconic views and the perfect spot to sip, savour and celebrate.  Working closely with the project architect, our Deluxe Outdoor Living Pod – 4 double modules totalling almost 200sq/m of coverage were specified. Featuring a louvered roof that rotates through 150 degrees and is waterproof when closed, the perfect atmosphere can be created on the terrace beneath throughout the seasons. Additionally integrated side screens prevent both breezes and driving rain, whilst infra-red heaters keep the chill away and LED ambient lighting to the inside of the cross beams softly illuminates the terrace on darker afternoons and evenings.  Matt Gayler, General Manager at Ridgeview commented:  “We wanted to design and create an amazing space that blended in naturally with the environment surrounding it. Though alfresco lead design, we wanted to be able to operate 12 months of the year whilst always delivering an engaging customer experience. The Deluxe Outdoor Living Pod was selected because of its adaptability and design with the structures becoming an integral part of the scheme. Caribbean Blinds were efficient from design to on-site logistics and being a UK manufacturer gave us peace of mind.” From design to installation the project took just 12 weeks, with installation completed in less than 2 weeks, all ready for the official opening and first private event – a vineyard wedding! A dedicated project manager guaranteed a seamless process and full CAD drawings were provided for sign off and to ensure the perfect positioning of required services (wiring and drainage) along with other elements such as interaction with decking.  To find out more about how we can help you create unforgettable alfresco experiences 365 days a year please contact one of our knowledgeable and friendly team on 0344 800 1947, send us an email projects@cbsolarshading.co.uk or visit our website www.cbsolarshading.co.uk.

Project: Manufacture and installation of bespoke concrete cladding in a high-tech media room. The design comprised of floating 3D concrete seat wrapped around the fire place and individually sized concrete panels for chimney breast, wall, floor and ceiling. All panels were fitted using mechanical and chemical fixings.Client: Tigg & Coll Architects  Materials used: Large format Plain and GAP GRC panels in Rough Mist finish and sealed with hydrophobic agent and clear sealant.On this challenging project we worked closely with Tigg & Coll Architects to manufacture and supply bespoke concrete cladding for new multipurpose media room.The large format bespoke Plain and GAP concrete panels were cast to the client’s individual and unique specifications using our BTX Ultra High Performance Concrete mix with a hydrophobic agent to limit moisture absorption. The panels were cut to fit around the fireplace, floor, walls and ceiling and then treated and sealed to make them stain proof.The finished effect is a modern, industrial look that complements client’s design style and creates a truly unique and highly relaxing space.