"building frames"

webertherm XP External Wall Insulation system has been specified for a contemporary new build in a designated conservation area in South West England. The revolutionary system has been used on the walls of the property while weberpral M through-coloured render has been used extensively to long runs of concrete walling.The planning term ‘conservation area’ all too often results in unimaginative new build designs mimicking the surrounding aesthetics rather than offering creative architecture that enhances the area. This stunning new home in Somerset illustrates perfectly how architectural flare and modern building techniques are fused to deliver a property that contributes greatly to the local environment.The 430m² private residence has extensive glazing to capture the glorious rural views and to encourage the benefits of maximum natural light. Sleek expanses of webertherm XP EWI with webertherm M1 through-coloured render enhances the profile of the house from all aspects. By embracing the topography of the site, which placed the front entrance at first floor level, and letting the rest of the house flow down to a lower ground floor layout, the house presents a low and softened profile to the onlooker.An enlightened planning approval was achieved for this privately commissioned design by Jason Jackson of Jackson Architects Ltd, Taunton. “An earlier traditional design was not considered suitable by local planners and we were asked to offer alternative designs for this family home. The client was immediately excited about a minimalist and modern design idea and asked us to submit the application. After careful negotiation with the conservation and planning officers, they agreed that the contemporary architectural style of the building would make a highly individual but fitting addition to the very traditional properties in the area. The only significant condition imposed on the planning approval was the removal of the permitted development rights so as to protect the purity of the design! We were really quite amazed and flattered to get this acknowledgement,” smiles Jason Jackson.Matching the dramatic visual appeal of this unique property is the construction formula and advanced thermal efficiency that has been achieved. The external walls are constructed as a single skin formed with 215mm thermal blocks that are protected by webertherm XP EWI using 50mm of high performance phenolic insulation.  webertherm M1, an advanced one-coat, polymer modified, mineral render, is factory batched and designed for spray application to reduce on-site labour time and access costs and has been used in White. A decorative scraped texture finish has been applied to the White render which catches and holds the light.Mark Pickthall, of M P Plastering, Somerset, carried out the insulation and render application for contractor Fry Developments Limited. The applicator also specified weberend aid to create a key coat before applying weberpral M through-coloured render, in Chalk, to surface finish long runs of poured concrete walling running from the house to the drive and garage areas. “The superb smart finish of the house structure achieved with the scraped surface of the 250m² of webertherm M1 render really underlines the beautiful architecture of this house which makes a great statement in the locality. We are all pleased to have been part of this exciting project,” reports Mark.Simon Fry, Fry Developments, is equally proud of this new build and pleased to have accepted the recommendation to use the webertherm EWI system. “My experience has only been with traditional sand and cement renders but Mark highlighted the qualities of the Weber system and I must say the result is superb. It’s a ‘no risk’ decision now for Fry Developments to use Weber products on my future contracts.”

The ChallengePark View is a residential development of 175 units, including one and two-bedroomed apartments and three, four and five-bedroomed homes. The site sits alongside Saltwell Park, one of Britain’s finest Victorian parks. A conservation area, the design of the site sought to blend tradition with a modern urban feel.The local council required a premium finish for which the choice of brick would play an important part in achieving.The SolutionAfter reviewing several options, Forterra’s Southdown Multi from its Butterley brand range was chosen. It is a high-quality facing brick with a tumbled texture.For some plots on the site, the bricks were laid in an English Garden Wall bond, closely reflecting the brickwork of some of Saltwell Park’s buildings.Alongside modern features, such as rainscreen cladding projections and timber finishes, the development also includes a number of bespoke elements appropriate to the conservation area: reduced window reveals, timber doors and windows coloured in a modern dark grey, natural slate roof tiles, exaggerated roof pitches to accentuate prominent plots and full height feature windows.The BenefitsThe use of Southdown Multi brick has proven to be an effective choice in the successful blending of traditional and modern, ensuring the new development quickly settled within its surrounding environment.

Victoria Residences is a bespoke collection 11 luxurious apartments and penthouses with elements of traditional British heritage blended with a contemporary and timeless design. Replicating powerful Georgian features with modern thermal efficient technology was a primary driver for the architect selecting Licata Building Systems as the facade provider. Specifying Licata Therm Eco, the installing partner used ashlar plus other decorative profiles to ensure the properties regal vision was achieved. The system was finished with a 1.5mm self-cleaning Silicone render to ensure the building retained that “just-applied” look for the longest possible period.

Deakin University and Barwon Health partnered up for a new research and clinical trial fit-out facility in the heart of Geelong CBD. Named the Health Education and Research Building, (also referred to as HERB), the project combined both open-plan office spaces for health education researchers, staff amenities and an open-to-public area for clinical trials.The final design navigates seamlessly through a conceptual identity between public vs private; vibrant vs sterile environments; by a fluid use of colour, texture and spatial dynamics.

Built in 1964, the Roscoe Building is the hub of the Faculty of Science at Manchester University. Designed by Cruickshank and Seward, it was named after 1860s Professor of Chemistry, Henry Roscoe. In 2009 we supplied the replacement windows for a refurbishment project undertaken by architects Farrell & Clark. The original windows were of German origin and advanced for their time: center pivot windows, to maximize light in the laboratories. To keep a consistent look we supplied the same style of windows but aluminium clad on the external face for ease of maintenance; and double glazed for energy efficiency.

The new build St George’s Quay student accommodation is part of the Luneside East Regeneration Project in Lancaster, which will create a new quarter of the city with a mix of housing, commercial space, high quality open spaces and walking and cycling routes.In a prominent waterfront setting on the edge of the River Lune and built on the site of the former St George’s Mill, the St George’s Quay development comprises four student accommodation blocks, ranging from three to six storeys, delivering 431 bedrooms in clusters and studio apartments.PROJECT INFOThe buildings are modelled around the existing industrial architecture of the site. The client used a mix of materials, including brickwork that reflects the local vernacular and Corten steel cladding to emphasise the site’s industrial history.In addition to the 431 bedrooms, the development also provides a gym, games room, communal dining, study area, and on-site parking.The development aims to be a landmark in urban regeneration and high quality design and be an exemplar of sustainable developments.The brick selected for the scheme is Belgravia Gault Blend, a buff, thrown brick from Forterra’s Ecostock range. It has a rustic finish that resembles a handmade brick. Ecostock bricks are manufactured using the latest technology in sustainability and production efficiency, producing bricks with low embodied energy as well as advanced colour consistency, dimensional accuracy and quality.

Steeped in a rich artistic history, The Now Building in London is an architectural marvel designed to revive the musical majesty of the formerly named 'Tin Pan Alley''.Inspired by the striking lights of Times Square in New York, the new, multi-purpose music venue and art installation is truly a sight to behold. Boasting a foyer that is covered from wall to ceiling with 8K screens broadcasting entertainment, music and digital artworks in breath-taking 360-degree, interactive 4D quality. For such an incredible, interactive and artistic experience – the ventilated flooring grilles were never going to take centre stage! However, the high quality systems were specified to perform and subtly enhance the spectacular digital aesthetic and unmistakeable gold exteriors surrounding them. An immersive experienceRegarded as London’s new home of music, art and culture, The Now Building plays host to 5 stories of interactive digital art, venue rooms, restaurants, studios and more. To achieve such an immersive experience for visitors, ventilated flooring grilles were specially designed and adapted for the floors, skirting and feature walls. INTRA Ceiling Grilles were also specified to hide various structural and functional services above, masking the pipework and HVAC units.The grille flooring uses a bespoke hinge bracket, custom designed for the project, to provide easy access to electrical socket points below. When it came to the feature walls, INTRA created a unique solution; the first of its kind on the market: a tailored version of INTRAgrille T2850, designed to plug the ventilation gaps for the huge 8K screens, allowing airflow to pass through and keep the screens from overheating. A matt black coating keeps this grille work ‘invisible’ – ensuring it doesn’t detract from the visitors’ viewing experience.Truly Spectacular!Proactive developing our existing product range to solve specific challenges for the site was one of the core successes of this project, as we were able to mould new fixings to help achieve Orms original design vision.The finished article is truly spectacular. The Now building and wider Outernet complex is now a centre piece of London’s artistic culture. Having already hosted some of the biggest names in British music and art, our INTRAgrille product enables the immersive experience to take centre-stage.

1,500/M2 3mm Aluminium 1050 Grade H14 in Optima FC and Optima TFC systems has been used in the completion of the striking Onyx Building, Lancaster Circus in Birmingham. Optima FC was selected as the client required a hook-on cladding system with secret fixings for the main extent of the face. Optima TFC was then used in a mechanical fix for the slatted window cover panels due to barrier loading requirements.The building, which has been designed to achieve a BREEAM Excellent rating, comprises of two bold, angular towers with sharply defined ‘razor’ edges and a smooth, highly detailed, gloss black finish, rising 13 and 24 storeys respectively. The towers are anchored by a middle section rising to 10 storeys and finished with a traditional, matt brick with defined window reveals and texture.The Optima FC & Optima TFC systems were used with bespoke detailing where the main façade (Optima FC Hook On) met with a slatted window cover panel (Optima TFC).Sotech and Axalta Coatings created colour matches to Alucobond 887 & Alucobond 888 Metallics to allow this project to proceed via a powder coating route.Now available for students, the 1025 building occupies one of the most prominent sites in the heart of Birmingham City, positioned between Vesey Street, Lench Street and New Town Row.TESTIMONIALSJamie Smith, Estimator:“It’s an eye catching building in a busy area of Birmingham. The mixture of Axalta 887 & Axalta 888 Metallic is almost alien against the traditional brick and terracotta buildings within its proximity.Phil Fisk, Axalta:“The striking, dark colours chosen for this project were bespoke metallic products bonded to gain the highest application stability. Manufactured using Axalta’s Super-durable Polyester resins incorporating higher grade pigments and stabilisers, the enhanced coating provides outstanding exterior durability as well as looking aesthetically impressive”.

As a key part of the University of Lancaster's Preston Campus, the £32 million Engineering Innovation Centre provided the university and Lancashire based manufacturers with state-of-the-art teaching and research facilities. This helps to train an extra 500 graduates, including an increasing number of female students, gaining degrees in subjects such as mechanical, energy technologies and aerospace engineering. Throughout the entire project, there were a number of technical challenges that needed to be met. These include the building's proximity to a very busy roundabout, the floor to floor heights, physical security, the expected levels of solar gain as well as design detailing requirements. Having a total glazed area of 3,100m2, the aluminium curtain wall carries over 40 different types of IG units, along with high density foam inserts utilised alongside decoupling joints in the mullion section - achieving 50 Dnfw flanking sound reduction, as well as 37 dB sound reduction for noise outside the building. In addition to achieving high levels of thermal insulation, being fabricated from aluminium, the curtain walling frame elements can be recycled, helping to achieve the BREEAM rating of Excellent.

Flexible workspace providers x+why’s new 33,000 sq ft location at 100 Embankment aims to provide “an impressive space from which to grow and thrive” for start-ups and established businesses across Manchester.Radii, working through our northern contracting office, joined John Robertson Architects and ADT Workplace in May 2023. Working across Ground, Mezz and 1st and 2nd Floors of the space, Radii’s popular single glazed Linear 25 (Rw 39 dB) and Linear 30 (Rw 41 dB) partitions and Hogan single and double pivoting doors (Rw 47 dB) were used for glazed fronts for a variety of different size meeting spaces and offices. Many of these were installed with our popular ‘Rio’ banding.Ei30 single glazed fire rated screens, complete with timber door frame junctions, provide exit route protection.The finished space also benefits from some of the 11 Ei60 FireTec double door sets installed across all eight levels of the building during the original base build Cat A fit out in 2020.

The neoclassical Grade II listed Samuel Alexander building was opened in 1919 and is part of the University of Manchester’s South Campus. Following recent significant investment, the building’s academic offices and teaching spaces have been refurbished and breakout areas created, and the reception and café have been remodelled. The building houses the University’s School of Arts, Languages and Cultures.

After the historic St Mary’s Hospital in Bristol received planning approval for Commercial refurbishment, we were contacted by M R Allen Limited to help transform the old healthcare facility to student accommodation. The building had been vacant for a number of years before the project to transform the space into 153 premium student rooms got the go ahead.The original hospital building was retained, with the addition of a 4 storey extension, a 3 storey new build, 8 no. townhouses and a new Communal space for students which includes an on-site gym, entertainment room, lounge and kitchen for private dining.Planning dictated that this undesignated heritage asset retained many of its original features, sat within a setting of various listed buildings and in a Conservation area.This led to us recommending timber Box Sash Windows from our Conservation range.All 109 box sash windows were manufactured in our British factory featuring high acoustic performing trickle vents & laminated glass in 24mm double glazed units, ensuring noise travel is kept to a minimum between accommodation.Mark Allen from M R Allen Limited explains;“We chose Mumford & Wood for their long-standing reputation for manufacturing British made, traditional timber windows – exactly what this project required. We also had some stringent acoustic performance requirements and working closely with Mumford & Wood allowed us to create a product that exceeded our performance expectations.”We finished the windows in ‘Signal White,’ featuring polished brass ironmongery.

Around 34,000 sq m of gypsum fibreboard has been installed throughout the internal walling of The Morgan Stanley Clinical building (Phase 2A), which will form one half of the £300 million Mittal Children’s Medical Centre at Great Ormond Street Hospital.

When the London School of Economics (LSE) sought an architect for The Marshall Building, it held an international competition to select a contemporary design that matches its global academic reputation.The winning design by Grafton Architects features striking pale stone rainscreen cladding that contrasts with the red bricks of surrounding buildings on Lincoln’s Inn Fields.At 10 storeys high, the building needed to conform with the changes to building regulations which ban the use of combustible materials on all buildings over 18m in England and Wales. As a result, Grafton Architects specified Knauf Insulation’s Rocksilk® RainScreen Slab for the three external wall build-ups.Rocksilk® RainScreen Slab is BBA certified for use at any height and the broadest range of thicknesses and build-ups on the market. It has the best possible Euroclass A1 reaction to fire classification, is manufactured from Rock Mineral Wool and has a thermal conductivity of 0.034 W/mK.With U-values of 0.14 Wm2K, 0.20 Wm2K, and 0.21 Wm2K required for the different rainscreen wall build-ups, sub-contractor I&S Construction consulted Knauf Insulation’s Technical Support Team about the right depth of insulation. After conducting U-value calculations, 150mm Rocksilk® RainScreen Slab was recommended for all three build-ups.As well as fire safety and thermal performance, Rocksilk® RainScreen Slab has excellent sound absorption properties.It is manufactured with ECOSE® Technology, Knauf Insulation's unique bio-based binder that contains no added formaldehyde or phenol. It is made from natural raw materials that are rapidly renewable and is 70% less energy-intensive to manufacture than traditional binder, so it is more environmentally friendly.Products made with ECOSE® Technology are also soft to touch and easy to handle. They generate low levels of dust and VOCs and have been awarded the Eurofins Gold Certificate for Indoor Air Comfort.Thanks to Knauf Insulation’s Rocksilk® RainScreen Slab, the Marshall Building will provide students and academics at LSE with a comfortable and quiet environment to facilitate their world-class academic work.

Beechview Drive is a development by MD Constructions Ltd consisting of 8 brand new, luxury detached family houses set in a secure gated development. Each comprising 5 bedrooms, 3 bathrooms, stunning kitchen diners and integral double garages. Licata Building Systems supplied full silicone render systems and clay brick slips systems for the facades of the houses. The combination of the two finishes created a modern style to the development. Full Licata waterproofing systems were used in the bathrooms of the properties and were also finished of with high quality premium Italian porcelain tiles supplied by Licata.

Design consultants AECOM delivered efficient hot water distribution using 800m of RAYCHEM HWAT-M self-regulating cables, to provide a single-pipe system throughout the building. Its compact design, eliminated the need for recirculation pipes, thus enabling the system to be installed in restricted spaces. Pipe freeze protection was achieved using 300m of RAYCHEM WinterGard self-regulating cables. Snow and ice prevention on the car park access ramp was provided by 1200 metres of RAYCHEM EM2-XR selfregulating cable controlled by a VIA-DU-20 multi-sensor control unit.

The aim was to build a new dairy of the highest welfare standards which would present dairy farming at its best. Shand Building Design (SBD) produced a unique building that focussed on key issues that they discovered were affecting the welfare of livestock and working processes. This included a major redesign of the roof structure moving away from the typical steep pitch to a stepped 15 degree pitch greatly improving airflow.

Situated between Antwerp and Ghent, this new build office in the town of Temse was finished with EQUITONE [tectiva], arranged in variously sized and placed panels, giving a contemporary, but minimalist finish to the building.

nVent was brought in to employ a variety of heating solutions at the London Rolex Building. Rolex was looking to convert its heating to a simpler, lower cost single pipe system requiring less maintenance. nVent provided hot water services using the RAYCHEM HWAT single pipe hot water temperature maintenance system. More than 400 meters of cable were installed to provide hot water all the way to the point of use, 600 metres of pipe freezeprotection to safeguard the chilled water supply lines from freezing. In addition, the entrance foyer welcomes visitors with the warmth of RAYCHEM QuickNet floor heating systems.

We’ve installed new unisex ‘superloos’ to make the most of the available space on every floor of the iconic Heal’s building in London following an extensive refurbishment programme. The self-contained 'superloo' cubicles each has its own vanity unit and hand drying facilities. Natural stone vanities, featuring inset waste bins, were installed along with wall panelling and our Concerto integrated duct panel system both finished in toughened glass. Our full height Alto toilet cubicle doors, which were metal faced and feature bespoke door handles, specially designed for this project, complete the design.

We have installed our stunning full-height Flow cubicles at the St Botolph building in London. A delicate pale wood grain laminate across both the cubicles and the sentry ducting sets off the washrooms beautifully. The washrooms at St Botolph required an upgrade after having the paint on the previously installed cubicles began to chip, and the hardware started to break down. With Thrislington’s market-leading 15 year guarantee for Flow, St Botolph are safe in the knowledge that problems like this will not occur again. All our products are produced in the UK factory using materials designed and tested to perform in the washroom environment.

An award-winning case study from Forbo Flooring Systems – their Allura Flex LVT was specified by design and fit out company, Oktra to transform an office building into a stylish and modern workspace.The project was installed adhesive free by The Commercial Flooring Company Ltd using IOBAC MagTabs to help achieve client Akoya’s sustainability requirements.And for property owner Brunswick, now part of Feldberg Capital, adhesive-free installation means that their raised flooring asset will be protected from contamination for longer term usage.The project recently won Oktra “Best Commercial Renovation / Redevelopment UK” in the UK Property Awards.

New build home, this luxury rural setting has been carefully designed to enjoy the surroundings from indoors. The subtle external design is carried throughout the home with many integrated and concealed details.

Installed alongside some interesting brass architectural detailing, TECHNAL aluminium windows, doors and curtain walling has been specified and installed at Heathervale House, transforming the outdated office development. Situated in the centre of Tunbridge Wells, Heathervale House is a commercial property that has been used as an office space for decades. Originally clad in brick, slate and hung tile, the building had shown signs of disrepair, looking tired and dilapidated. To bring it back to life, the building owner developed plans to undertake a wide scale refurbishment and extension of the property. Following a feasibility study, the building was handed across to design-led architectural practice MortonScarr. From the outset, MortonScarr recognised how important updated glazing systems would be in improving the aesthetics and performance of the building, both internally and externally. Previously, Heathervale House had featured small, brown-framed windows, which limited how much sunlight those inside the offices received throughout the day. The entire facade of the three-storey building was re-clad with concrete tiles, with interesting projecting brass window boxes also incorporated. The window boxes, which feature TECHNAL systems, added visual relief to the building externally, whilst maximising internal vistas for the occupants. TECHNAL also assisted on a large rear extension, a new glazed lift to the front and two additional fully glazed storeys on top of the existing roof. Flooding the new office spaces with daylight, the large glazed expanses are shaded by two-storey bronze louvres. As a result the newly fitted office now brings in much more natural light than before.

Ground source review: Ullenwood Court, Churcham HomesA development of large luxury family homes in the heart of the Cotswold countryside is being built with sustainability in mind by property developer Churcham Homes. Once complete, all 26 contemporary properties, located within 34 acres of stunning countryside, will feature innovative ground source technology that produces zero emissions or air pollution.Key FactsPrivate, new build development13kW & 15kW Kensa Evo GSHPs52 x boreholes between 141m – 227m deepHeating, hot water and coolingAnnual heating load 672,099 kWhHigh spec, luxury new buildsUp to 6,547sq ft

13 new dwellings situated in the small village of Doddington, Lincolnshire are providing much-needed affordable housing for people working at nearby Doddington Hall.Located on Main Street, the development enhances this area of the village, providing important infill on the site once occupied by the local school, which was demolished in the 1960s and has latterly been used as a car park and general storage area. It is bordered by a mix of farmland, mature trees and shrubs, and existing housing, and lies partially within a conservation area.The development comprises two 2-bedroomed, five 3-bedroomed and six 4-bedroomed terraced and semi-detached dwellings. One of the terraces fronts onto Main Street while the remainder have been sensitively designed to create an attractive group of dwellings centred around a newly-created ‘village green’.Perhaps the most significant element of the appearance of the scheme is the elevation of the terraces towards Main Street. In developing the specifically tailored to design for this elevation, account was taken of the nature of the surrounding buildings within the village.Although not prominent to public view, the balance of the development has been designed in a manner sympathetic to the architectural vernacular found within the village. With a common thread running-through which will serve to unify the development and reinforce the sense-of-place which is presented by the scheme.In particular, simple, uncomplicated/uncluttered designs have been developed. High quality materials have been utilised for the development, essential in reinforcing the architectural character of the development, reflecting the high-quality of other developments which have been executed within the village recently.The brick selected was Forterra’s Butterley Breckland Multi Reserve, a red brick with a tumbled texture.

Radmat Building Products has supplied the waterproofing roofing system for the Crossrail Place shopping development and roof garden in Canary Wharf. The system provides high performance waterproofing and thermal insulation – guaranteed for the lifetime of the structure – and has enabled the construction of an extensively planted living roof.• The 310m long roof arches 30m over the park and opens to allow natural irrigation• Highly insulating roofing materials help create a microclimate for the gardensRadmat Approved Contractor Prater delivered a 9,300m² roofing solution using PermaQuik PQ6100 Hot Melt Monolithic Waterproofing Membrane, EshaFlex 370 WS Root Barrier and ProTherm insulation.Construction access to the complex inverted timber roof was challenging, so Radmat’s products were chosen for their quick and flexible application and fast-sealing properties.PermaQuik is widely used beneath green roof installations where long-term weather tightness is a necessity, and it was chosen to support the extensive and densely planted gardens, which are the main feature of the Crossrail Place roof terrace.The PermaQuik membrane was followed by EshaFlex 370 WS Root Barrier, a reinforced bitumen membrane that is torch applied to the base sheet. It was selected because of its thermal efficiency and suitability for use with living roof systems. Partnered with ProTherm’s excellent insulation, the complex timber roof now boasts a waterproof system that is BBA Certified to last the lifetime of the building.The wooden structure evokes the ships that once sailed into West India Dock and provides a warm, natural counterpoint to the steel and glass towers of Canary Wharf.And with Radmat’s high performance products and lifetime guarantee, the green roof terrace at Crossrail Place will be a living oasis in the heart of London’s financial district for years to come.

Ilona Rose House with its unusual rose-coloured 3D printed façade is a new-build, mixed-use project spread over 13 floors, including a 4 storey, basement with a quarter natural light. It has transformed the former site of the famous Foyles bookshop on Charing Cross Road, boasting outstanding new shops and restaurants, along with new pedestrian walkways, public realm and roof terraces.The unique building has been designed by MATT Architecture for main contractors Sir Robert McAlpine and offers 150,000 sq ft of office space, 20,000 sq ft of retail fronting on Charing Cross Road and a brand-new public courtyard with 15,000 sq ft of restaurant and bar space.The upper floors comprising of offices exploit the stepped massing of the building to create over 12,000 sq ft of planted external terraces for the benefit of the occupiers and to enhance the environment.The south-west facing terraces, nicknamed ‘the hanging gardens of Soho’ will provide external amenity space for every single level of office. It is here that Radmat’s waterproofing and insulation products were chosen for their tried and trusted properties. PermaQuik Hot Melt Bitumen Waterproofing System was used on 95% of the roof areas, multiple roof terraces, Greek Street Tunnel and James’ Courtyard.

As the oldest building on Newcastle University's campus, The Armstrong Building has an iconic status. Grade II listed and steeped in history. A setting perfect for the Westfield Yorkstone, which was supplied to this project in the form of both paving and setts, in a multitude of plan sizes.

630 Sash Windows Restored at Grade II Listed Liverpool LandmarkKEY FEATURES: COMMERCIAL, GRADE II LISTED, SASH WINDOWS, LARGE DEVELOPMENT, RENOVATION, VENTROLLA PERIMETER SEALING SYSTEM (VPSS), VICTORIANThe Grade II* listed Port of Liverpool building was built in the early 1900s and makes up one-third of the “Three Graces” based at Liverpool’s Pier Head, a UNESCO World Heritage site.It was extensively damaged during the Blitz in 1941, and in 2008 we were proud to form part of the major internal and external restoration project, worth £8.5 million, by (then) owner, Liverpool’s biggest commercial landlord company, Downing.The building is home to some of the most prestigious companies in Merseyside, including Rathbones Investment Bank, and is one of the largest projects ever undertaken by Ventrolla.The 630 windows were renovated and upgraded by Ventrolla using the Perimeter Sealing System (VPSS), thus draught-proofing the windows, as well as renovating all the rotten exposed timbers and replacing timbers where necessary. The VPSS system has been independently tested (Class 3 of BS 6375-1) to withstand winds of up to 71mph, something which will come in useful against the harsh sea winds experienced by this building.A spokesperson for Ventrolla, said:“At Ventrolla we are committed to renovating historic buildings in a way that allows them to retain their character and be energy efficient. The Port of Liverpool Building is a striking landmark on the Liverpool riverside and we are delighted to play our part in its regeneration.”Ian Orton, a Director of Downing, said:“Ventrolla’s work is part of a £10 million restoration programme that Downing is undertaking to restore the Port of Liverpool Building to its former glory and enhance its appeal as a contemporary office space.”Now owned by Amtrak Real Estate (who purchased the building in 2015), the Port of Liverpool building remains an iconic part of the docks in Liverpool, the design of which was the result of a competition for local Architects to submit designs for the new building in 1900 and the first prize was £300. The winning design was created by Sir Arnold Thornley and F.B Hobbs in collaboration with Briggs and Wolstenholme.The building has also had more than its fair share of fame, being used as a film set in several productions, including The Adventures of Sherlock Holmes & Foyles War (TV series).Ventrolla offers a bespoke renovation service for timber sliding sash and casement windows as well as timber doors. Ventrolla has its central office in Harrogate, North Yorkshire, with additional offices throughout the UK and Ireland.

Project: Birmingham Energy Innovation CentreDate: 2020 Background:·        APL were engaged to provide a non-combustible construction solution to meet challenging acoustic and thermal performance requirements for the roof and walls·        APL were able to meet the clients requirement for matching solid and perforated profiles·        APL provided all structural, thermal and acoustic calculations Systems:·        2,000m² of APL built-up pre-coated aluminium roof system, using the sinusoidal AP18HR and trapezoidal AP31/1000RR profiles·        1,300m² of APL built-up aluminium wall system, using the sinusoidal AP18HR and AP45HR profiles with both pre-coat and PPC finishes·        800m² of APL perforated aluminium wall system, using the AP45HR-Airwall™ profile with a PPC coating·        Bespoke featured fins in aluminium with an anodised-look PPC coating·        APL Tritherm™ GALV sub-framing ·        All flashings, fixings and accessories  Building Location:·        Birmingham

Knauf integral in Warwick Hall development.The Knauf team has played a significant role in the  specification and design process during recent  construction at one of the oldest schools in England, working alongside award winning Associated Architects to produce a masterclass in acoustic  performance.The site consisted of an existing hall, which was used for assemblies, performances and functions. This hall was built in the 1960s and suffered from a series of failings which impacted its flexibility and usefulness.The proposal for the Warwick Hall was an opportunity to build a physical embodiment of Warwick School’s  academic excellence, prosperity and ambition, which saw the existing school hall stripped back to its structural frame and heavily modified to provide a state-of-the-art, revitalised and flexible school hall with  a large double height entrance foyer, two performance  studios and other ancillary spaces. The brief was given to the team at Associated Architects and they quickly relied on the quality of materials and service provided by Knauf.

A beautiful timber frame house, made of Western Red Cedar based in Kings Langley. Kings Langley, Hertfordshire is the birthplace of Ovaltine, the soothing malt drink. The village is divided by the River Gade and endowed with a couple of beautiful lakes.It is here, at one of these lakes, that a charming timber garden house is fitted with beautiful wooden louvres. By Sunshield, in collaboration with Contrasol. We were delighted to assist the owners with custom made external louvres to provide the a much needed perfect solution to reduce glare. Our client is sensitive to light and needed an effective shading product to specifically reduce sunlight entering the internal space.Our client was looking for something to be able to control light as well as a solution to fully block out light at night. The windows are South facing; therefore the louvres were also perfect for shading purposes and heat reduction.The Sunshield team applied the popular 98W which is made from Western Red Cedar to compliment the overall building.

A grade II listed building in Birmingham has recently been tranformed into student accommodation comprising a mixture of 399 bedrooms, 4 commercial units and amenity spaces.The architects involved in this project needed to source a supplier who could provide reliable, high-quality washrooms facilities. To fit in with the modern décor, they wanted something practical but contemporary.Our specifications team met with the client to discuss their requirements in order to present options to satisfy their needs. The customer expressed an interest in our Universal Compact Frame, Phantom Contract Concealed Cistern and Reef dual flush push plate. Samples were presented for approval.Testimonial“The team at TYDE understood what we needed and presented us with a variety of options and explained the benefits of each product. They knew cost played an influential part and factored this into their recommendations. The installation was smooth and the look of the chrome plated push plates is impressive. Thanks to all involved for helping us complete this project successfully.”

A special educational needs school in Salford welcomed an additional sixty pupils across its two sites in Swinton and Irlam this September.Springwood Primary School, which is the only primary school of its kind in the city, increased its overall capacity to three hundred pupils from nursery to Year 6.The expansion involved enlarging a second site at Craig Hall in Irlam which the school used as a ‘temporary annex’ for around three years.Twinfix were approached by MTX Contracts the Principal Contractor on the project to design, manufacture and install a canopy at the site, between the building and existing canopy.A major challenge that Twinfix’s design team needed to over-come was a Build-Over-Agreement issued to the school by the Water Board, which required 24/7 access to the drains beyond the proposed site for the canopy.The team rose to the challenge and designed this mobile canopy, a first of its kind for Twinfix. This impressive free standing curved canopy, spanning a total of sixty square metres comprises of a sliding section with a run length of three metres and a static section with a run length of 17.5 metres.The aluminium structure is powder-coated to RAL 5003, Sapphire Blue. The half barrel vault roof design was constructed using Twinfix’s bespoke roof glazing systems glazed with 10mm clear polycarbonate. The non-fragile system achieves a Class B designation in accordance with the HSE’s ACR[m]001:2019 drop test.The main challenge was to create a frame that was strong enough to retain its shape when moved but light enough for a single person to open and close the retractable section. This was achieved through material choices, such as the polycarbonate vertical glazing instead of glass to keep the weight to a minimum. The expert team also designed a bespoke track and wheel system which allowed the whole frame to glide open and close very easily, once closed it was locked in position to the adjacent fixed frames which retain it in place during high winds.Director at Twinfix, Dan Smith commented: ‘From initial concept we felt like this product would fit in well with our current product range, so had confidence it was something we could develop for the client. The finished design looks really well and is extremely easy to use, this is a credit to our internal design and fabrication teams that worked together to achieve our goal’Matt Lawrenson, Deputy Head at Springwood commented on their new canopy: ‘Over the Summer of 2021, we had a Sheltered Walkway constructed and installed by Twinfix at our SEND provision, where we have children with a range of complex additional needs aged 2-7 years old. Our sheltered walkway allows us to move pupils between our existing school building and the new extension we have had built. As well as ensuring safe passage for children and staff, the quality and dimensions of the structure will provide an ideal additional learning space for our pupils, lending itself to a whole host of possibilities. It is light, spacious, and aesthetically pleasing. Furthermore, the walkway satisfies an extremely specific and demanding design brief, with a retractable section which will allow utilities services access to a rising main in the event that this should be needed, without compromising its appearance or necessary sturdiness. We could not be more pleased.’You can see the canopy in use here.

Project:Broxbourne SchoolClient:Chase New HomesContractor:Mid GroupArchitect:Bond BryanValue:£28mLocation: Broxbourne, HertfordshireGIFA: 9,633 m²Completion: 2020NEEDNew school projects require high building performance and quick delivery. Broxbourne School, replacing a sold secondary school site, also includes a community sports and music centre. Offsite methods deliver airtight, thermally efficient buildings quickly, as demonstrated by Broxbourne School, thanks to the close partnership of the architect, developer, and contractors.SOLUTIONMid Group, Innovaré, and Bond Bryan, having collaborated on multiple projects, efficiently deployed offsite methods, including the Innovaré SIP System. Structural SIP walls were used for teaching wings and as an airtight wrap around the steel frame of larger spaces, with brick slip facades by Aquarian Cladding Systems. The design focused on optimal classroom conditions and suitable materials for each structure part.OUTCOME Precise project planning meant that the Innovaré installation teams were onsite for just 15 weeks The buildings feature exceptional thermal efficiency (U value of 0.2w/m²K) and airtightness (5m³/m²/h), surpassing DfE targets, reducing energy demand, and lowering operational carbon. Extensive use of structural timber reduced embodied and sequestered carbon. The project’s success resulted from close partnership, leveraging prior knowledge and resolving issues early