"single bed"

This particular project was a private residential bathroom in the architects own house. The client wanted a linear channel, but the joist layout prevented the use of a traditional single gradient tray with the drainage at one end, so instead we opted for the wedi "Riofino" shower tray with a central channel with a tileable insert as you can see above.The build also includes the use of our pre-formed wedi "niche" and wedi building boards on all the walls and floor coupled with our 360 and 610 adhesives for the complete system solution and warranty.

The Big Chill, a bar in King’s Cross, was creating a public roof terrace on an existing structure. The deck was complicated with many changes of level and multiple objects present. A single ply membrane was installed. Paving and decking was required. Adjustable pedestals were laid directly onto the surface and their heights altered so that the upper surface of the 50mm paving slabs and the 125mm decking frame would be level. Nothing penetrated the membrane and the weight tolerance of the ASP and TD pedestals meant even very heavy traffic on a public bar was accommodated.

The number of Davit Arms required for a project should not sound like the quintessential British question of "one lump or two" for your cup of tea.It should depend on the specific project parameters but it is a question we are often asked, even if the employer's requirements or access strategy specifically identify a quantity.There are however a few definitive requirements. If the system is designed for single users (due to roof/building structural load limitations for instance), then two Davits must be provided to facilitate safe rescue. Equally, although Davits are component form and portable, the units are not light to carry between buildings, might be too large for service lifts and no one even wants to think about the stairs - the buildings being cleaned by rope access for a reason!Additionally, the duty holder and building owner should consider cleaning times and crew efficiency. Responsible IRATA contractors operate in a team of three, with one level 3 supervisor and two operatives. With a single davit, two of the team are effectively non-productive.Finally, it can be that multiple outreach davits are required. The projection requirements can vary depending on rooftop socket locations, parapet sizes, and façade elements. For extended cleaning cycles, Davit arms should project so that there is a naturally extended reach.Leave the one lump or two questions for your cup of tea, or number or shots of espresso if you prefer……….

Canberra HouseBauder Cold Applied LiquiTOP SystemSynopsisCanberra House is an office facility in Swindon. The existing single ply PVC waterproofing system roof was leaking and so Bauder carried out a full site survey. The resultant report gave the client several options to rectify the leaking roof.Bauder Building BoardProject nameCanberra HouseLocationSwindonProject typeRefurbishmentRoof size985m²SpecifierRapleys LLP (Bristol)Approved contractorCentral Roofing & Building Services LimitedThe specificationThe LiquiTOP system was chosen as it can be applied directly to the prepared and primed existing single ply covering. The liquid system allowed us to get into tight spaces and without the need for any hot works.LiquiTOP is excellent on refurbishment projects where the complexity of the roof involves intricate areas to be detailed that are not easily achieved with a sheet membrane, or the actual working space on the roof is constricted.Project challengesLarge areas of plant and machinery were situated just above the roof level making access to the areas below difficult with the plant in-situ. The available budget on this project did not allow for lifting or removing the plant, stripping the existing waterproofing system, and replacing with new. Therefore, the decision was made to overlay the existing single ply membrane with a cold applied liquid waterproofing which can be installed without the need to raise any plant.To overcome drainage challenges, secondary upstands were created under the plant and fabricated channels placed underneath allowing water to flow through to the drainage points.The resultBauder was able to offer a cost-effective solution without the necessity to remove or decommission the roof mounted plant and machinery. Cost reductions were achieved for the client by overlaying the existing roof, negating any need to strip existing materials, and not having to remove or raise the plant.The works were carried out by Central Roofing who manged the project impeccably and also finished ahead of schedule.System installedBauder Cold Applied LiquiTOP System1 LiquiTOP PU cold applied liquidA moisture triggered curing polyurethane waterproofing resin; applied in 2 coats, reinforced with Bauder LiquiTOP Glass Fibre Mat.

OverviewThe BP2 office building was constructed on reclaimed land at the eastern gateway to the Canary Wharf estate and comprises 14 stories above ground, plus three basement levels. The building’s design places a strong emphasis on energy-efficient performance, so this was an important criterion in the selection of ventilators.OverviewThe BP2 office building was constructed on reclaimed land at the eastern gateway to the Canary Wharf estate and comprises 14 stories above ground, plus three basement levels. The building’s design places strong emphasis on energy efficient performance, so this was an important criterion in the selection of ventilators.Project BackgroundAir Design Systems Ltd provided a full design and build package for the client. This included installation of local control panels and electrical wiring, as well as micro-switches to allow a positive signal that each ventilator is fully open prior to the pressurisation system starting up. Air Design Systems Ltd also supplied and installed numerous continuous louvres to the plant wells that rise through the building and terminate at roof level.Project SolutionPowrmatic supplied a large office building ventilation solution with a combination of single and double flap Skyvent ventilators to provide natural and smoke ventilation at the BP2 building in Canary Wharf, East London. Each of the 13 BS-EN 12101 ventilators was installed by Air Design Systems Ltdonto existing upstands with insulated lids and bodies and polyester powdered coated to RAL 9007 matt.Project ResultSkyvent ventilators are designed for both smoke and natural ventilation and are available in single and twin flap versions to suit the needs of each project. They can be installed on upstands, roof sheeting and into glazing systems. They feature very low air leakage when closed, and are weatherproof when closed, as tested to BS Parts 1 & 2. Insulated options can achieve U-values as low as 0.17W/m2/K.Skyvent ventilators are available with optional aluminium (single skin and insulated), polycarbonate or glazed lids in polyester powder paint finishes to any standard BS or RAL colour. A full range of accessories is available including bird guards, security guards and insect mesh.

Two five-panel BSF70 bi-folds installed on the front of the garden room open out from the centre, while the pool area features a single, nine-panel bi-fold which opens up one way from right to left to create a seamless link between inside and out. There are also two further five-panel BSF70 bi-folds installed at the end of the building and working as a divider between the two separate zones. All the doors are in Anthracite Grey throughout, double glazed with black, warm edge spacer bars.

ASF worked closely with the architect to develop a 'whole material solution' for what started as an open spec project. The brief was to produce a single material and very high quality street furniture package that complimented but did not dominate the market square. It was decided that LG2 Aluminium Bronze would be used. In this material ASF produced bespoke cycle stands, feature paving strips, a feature paving tree surround and bollards as well as step units to properties surrounding the square. Feature products were all sand cast and above ground externals machine engineered.

When Booking.com decided to move their offices to a prime location in Central London, they required a full fit-out. They appointed HLW International, who specified Billi Taps for their main kitchen area, and another tea-point within the office space. Booking.com opted for Billi Quadra Plus 15. With a drainage font in chrome and a gloss finish, the tap delivers instant boiling and chilled water from an XL lever tap at just a touch of a finger, and hot and ambient from a second sink mixer tap – all this from a single under counter boiler unit.

The ideal modern washroom included: mounted taps to minimise splash-back, bespoke combination units with special makeup bins to prevent toilet blockages and even matching sanitiser and toilet roll holders. We worked with UBS facilities and Make Architects as the design consultants to create the perfect washroom. Not a single aspect was overlooked – we even changed the design of our soap dispensers and taps to suit the client’s needs. Our numerous site visits paid off and the client was delighted, particularly because our designs reduced carbon emissions by 65%.

Aptly named The Manzoni, the new 100-cover restaurant by Tom Dixon's Design Research Studio pre-opened at the beginning of April 2019 to coincide with Milan Design Week, and re-opened just after Salone as a permanent restaurant.After a year's absence Tom Dixon returned to Milan and rethought how a design brand can embed itself into the heart of Italy's commercial and cultural capital. Monochromatic and crisp, with metallic and marble accents, the restaurant – which correspondingly functions as a showroom – is also warm and inviting. And every single item inside it is also for sale.

The cast iron flyscreen air brick has the advantage of protecting the property from insect and rodent ingress but can help stop flooding with this innovative and simple barrier. The flood screen is a cork gasket for our single and double flyscreen air bricks and is simply inserted in the air brick when flooding is likely or imminent in place of the fly mesh. Once the danger has passed the copper fly mesh is replaced and the cork flood screen stored away safely until require again. It is available with our 9x3 and 9x6 cast iron air bricks here

Although we have cast iron slotted air bricks in metric sizes to perfectly engage with modern plastic ducting and periscopes, there may come a time when the installation requires imperial old patterned cast iron air bricks. Connecting these can be especially difficult which is why we've introduced these aluminium sleeves known as the metimp adapators (short for metric imperial). They are available in two sizes, single air brick size to connect up to a periscope duct and cavity wall sleeve or the double brick size for connecting to a larger wall sleeve

Hope View Independent School is a boys only institution that works with 7-18 year olds who have behavioural and learning difficulties. The school is situated close to a major transport route and along the same road as the train station. We supplied and installed 20m of Securi-Mesh® 358 fencing 2.44m high to replace existing fencing that was close to the train station and track. In addition to the fencing, we installed a single leaf Securi-Mesh® matching gate which has the same properties as the fencing, meaning there are no weak gaps in the perimeter.

The demand for an energy-efficient hot water distribution system was met by a single-pipe system with 850m of RAYCHEM HWAT-R self-regulating heating cables, managed by nine RAYCHEM HWAT-ECO smart controllers that interface seamlessly with the BMS. Eliminating the need for the secondary pipework of a conventional recirculation system saved space and achieved cost savings of between five and ten percent in material and installation time. Pipe freeze protection was also provided by RAYCHEM WinterGard self-regulating cables, supported by an AT-TS-13 surface-sensing electronic thermostat.

The new ECO Tapillo Tap Hand Dryers have been designed with both style and function in mind.Both the Tapillo Single Air Tap Hand Dryer and the Tapillo 2 in 1 Air and Water Tap Hand Dryer are beautifully made from top quality 304 stainless steel and manufactured to an exacting high standard.Each dryer boasts an air temperature sensor to automatically reduce the heater power, saving energy and money. A 2x stage air filtration process also provides ultra clean sanitised air.

Following the success of the Shoreline and Ocean hotels at Butlins’ Bognor Regis Resorts, the Butlins Wave Hotel is the newest addition, with the widest range of accommodation options. All three have been waterproofed by the Roofline Group. Cefil single-ply roofing membrane covers tapered insulation, with Fixfast tube washers and fasteners holding it all in place against the prevailing sea winds."We always get good service from you guys - that's the main reason we've stayed with you all these years"Bryan Lock - Project Manager at Roofline Group Ltd

Ping An Finance Center is an iconic 115 story skyscraper in Shenzhen, China. Reaching 600 metres high, this striking building was completed in 2017, making it the world’s fourth tallest building and the second tallest in China. Jotun was chosen as the single source provider due to our long track record of multi-divisional, complex projects. Jotun Protective Coatings and Powder Coatings were specified to protect the steel structure and façades. An ideal choice, confirmed by both the contractor and applicator, due to Jotun’s consistent application properties under varying environments and construction conditions.

The project needed to achieve environmental standards and create a collaborative teaching and learning environment. Komfort’s Polar systems covered a large area of the facility. Polar’s single glazed minimalist form is designed with the minimum of components, thus facilitated speed of erection without compromising structural stability and rigidity. The patented bubble joint ensured a virtually frameless system with no vertical posts between modules, corners or three-way junctions. Double glazed Polar’s simplistic method of installation, relocatability and powerful acoustic properties made it an intelligent option for this fit-out.

The existing factory finish to this metal roof was degraded and failing in multiple places. The roof was cleaned and all existing GRP roof lights were replaced. Cut edge corrosion & spot rust was treated using Liquasil corrosion primer. An initial coat of Metalseal 20 was roller applied to all corrosion treated areas, followed by a single coat of Metalseal 20, spray applied to the entire roof area. The end result looks like a new roof and will easily provide 20 years protective, water resistant finish to this once poor roof.

The Ascent Up and Over step unit / Industrial stair system was specified to create a safe means of access up & over items of mechanical plant & equipment to the roof of the airport terminal building. The Industrial stair unit is supported on rubber spreader feet which provide a non-penetrative support solution on the flat single ply membrane roof. The stair unit is designed in accordance with BS EN ISO 14122-1:2001 + A1:2010 and Building Reg Part K:2013 and manufactured following 1090 factory production control procedures.

At a dizzying 160m (525ft) tall, London’s distinctive Walkie Talkie building required an exceptional roofing solution. Designed by architect Rafael Viñoly and costing over £200 million, 20 Fenchurch Street is a 34-storey commercial skyscraper in London, known as the ‘Walkie Talkie’ building due to its top-heavy form. It is designed to have a BREEAM excellence rating. Sarnafil G410-12EL single ply provided the perfect solution to this design criteria, thanks to its excellent flexibility and weldabilty, while offering outstanding resistance to weathering, including permanent UV irradiation.

In a complex new build roofing project that was deemed almost impossible, Contour Roofing stepped up to the challenge with a Sika Sarnafil membrane. With truly stunning results, the project impressed the judges of the prestigious NFRC UK Roofing Awards, winning the Single Ply category. In partnership with Sika Sarnafil, Contour quickly presented a new bespoke specification; an adhered system using Sarnafil G410-15ELF Lead Grey with a polyester fleece backing as the main roof sheet for a flawless result and Sarnafil G410-15EL Lead Grey for all the detail work flashings.

Over 1,200m² of Protan SE 1.2mm PVC single-ply membrane was installed in the Protan Vacuum roof system at Butlins Splashworld, Skegness. The roof system required no mechanical restraint or adhesives (except for around the roof perimeter and penetrations), as it relies upon the wind to keep the membrane in place with the help of Protan vacuum vents installed at locations designed by Protan's Technical Services Department. William Bird of Protan partner roofing contractor, Roofdec Ltd, commented, "Protan's vacuum roof system is quicker to install than conventional fully-adhered or mechanically-fixed systems."

Celebrating its 50th anniversary in 2019, the iconic Bell’s Sports Centre in Perth, needed a new roof to protect the building. With the previous roof membrane nearing 30 years old the centre needed a long-term and robust roofing solution. The product of choice was the mechanically fixed Sarnafil S327-15 EL Light Grey as it is more than able to cope with all the extremes of the Scottish weather and has been certified by the BBA to last in excess of 40 years. The durability of the single ply material ensured a long-lasting solution for the project.

Situated just 10 short metres from the beach at Perranporth in Cornwall, The Dunes was a 14-month project challenged with unforgiving coastal weather and high expectations in terms of quality workmanship. Comprising 36 contemporary beachfront properties, the luxury development, completed features unobstructed views of the Atlantic. To withstand the South coast’s often extreme wind and rain, while matching the luxury aesthetic of the build a robust but aesthic solution was needed. Sika Sarnafil’s single ply membrane was specified as the solution and to also ensure a high-quality and cost-effective finish was provided.

Project: Design and manufacture of 2 reception desks and browser in GRC cast and sprayed concrete with brass finishes for ROMO GROUP. Materials used: Hand cast and sprayed GRFC concrete in Silk Mist finished with brass detailing. For Romo’s flagship store in London’s Chelsea Design Centre, the Living Concrete team were faced with the challenge of converting complicated geometrical designs into two precast reception desks and a browser. The single casts were made offsite, with each being over four meters long. They were treated and sealed to make them stain proof.

Vattenfall is one of Europe's largest producers of electricity and heat an have markets in Sweden, Germany, Denmark and further.We have designed, fabricated and supplied the steel and GRP grating, barrier handrails and ladders to the Ormonde Wind Jackets wind farm.The 150MW wind farm is the first offshore wind farm to use steel jackets for the turbine and substation foundations. The jackets were transported offshore on cargo barges and secured onto the seabed by inserting the four legs into pre-driven piles the longest 'single-pull' electricity export cable installation in UK waters (42km).

When Mersey Care upgraded their existing leaf-and-a half bedroom door arrangements, they wanted to improve the anti-barricade access and robustness of their doors – while still having a clear opening width of 1000mm. They found the leaf-and-a-half arrangement wasn’t ideal – with a bulky meeting stile and additional exposed metalwork. To address this, we proposed an extra-wide single leaf Symphony doorset. Aided by market-leading fire evidence, the leaf is 1100mm providing a clear opening of 1050mm – more than enough space for a service user and two members of staff.

The goal for this residential dwelling in Salcombe was to create a completely unique space, nestled into the cliff-side to provide a feeling of comfort and seclusion, while maximising the views over the estuary. To achieve this, ten Reynaers aluminium lift-and-slide doors, alongside aluminium windows and single-entrance doors were installed. The aluminium frames provide the strength and stability required for large expanses of glazing, while delivering required pascal ratings to resolutely stand up to enduring winds and harsh coastal conditions. Pre-anodized paint adds further durability to protect the property from the elements.

A great example of where Silent Gliss products can be specified across many apartments in a single development. This large luxury apartment complex wanted to optimise the look of the building from the outside as well as the inside. All apartments installed Silent Gliss Wave on the main side of the building which gave an overall co-ordinated and stylish effect to onlookers. Combined with other motorised roller blinds, this project is a great example of how Silent Gliss can use it’s wide product range to meet the needs of any kind of shading requirement.

The ground floor of an up-market McCarthy and Stone retirement village has been cleverly divided using a Stylefold 120 manual folding wall, allowing staff to quickly adapt the room to create a wellness area and dining facility, or a single large function room. Partitioning experts Style recommended this top hung folding wall as it is easy to manoeuvre and it also delivers an impressive 41dB Rw acoustic integrity, ensuring excellent privacy between divided areas. A smart grey laminate finish complements the contemporary interior design of this impressive new-build development,

Vtec was specified to provide feature ceiling beams using our MaxiBeam raft above an informal seating area in the large social space. Finished in a special Oak laminate, the raft’s interesting geometry follows the shape of the building and draws the eye. No two beams are the same; each was individually shaped and sized to perfectly fit the perimeter. Our Technical Team provided detailed set out dimensions to ensure correct positioning of the MaxiBeams for smooth installation, with the outcome that every single one of the feature ceiling beams is fully removable using our Click-Fix method.

The front of the property is single story blending in with the local style of properties, with the rear providing a totally different aesthetic. Traditional Textures Dark Zinc Patina Aluminium has been used to provide the roof with a modern but yet village/barn feel depending which side of the house you view it from. The finish is matt which minimises any reflection and also gives out the same warming feel across the property. The aluminium has been used for all the ridges, verges, fascia's and soffit to continue the minimalistic crisp edge finish.

Dynamic interior spaces created for flagship care homeIssue Quantum Care were launching their flagship care home, Mantles Court, and wanted an interior design that created a warm, welcoming and comfortable space. Quantum Care asked WHAT IF? Designs to create the interior spaces with a non-clinical feel, making the state of the art, 78-bed care facility feel like a home-from-home for residents. Approach WHAT IF? Designs looked at the flow of resident living spaces and the needs for each area. Communal spaces including lounges, dining and kitchen areas required floors that were easy to clean, looked fantastic and provided safety from slips. For the ensuite bathrooms, a softer, neutral coloured floor with slip resistance for both staff and residents was needed, while bedrooms called for a more homely, domestic feel, with comfort under foot as a priority. Solution Altro Wood was chosen for the dining room, bedrooms and the hair salon for its natural, homely, good looks. Altro Aquarius and Altro Pisces, with their wide colour palette and lifetime sustained slip resistance, were selected for the ensuite bathrooms, providing safety for shoe and barefoot users. And in the communal areas, Altro Ensemble was chosen for its flexibility and design choices as well as its noise reduction and comfort underfoot.

ASA Landscape Architects were appointed by the UKAEA to design a new vibrant landscape to replace the tired patch of grass in a quadrangle within the Culham Science Centre. The brief was to design a place that would be used as a meeting area for lunch and other social events, supporting the restaurant situated within the building. The focus is on the tenant’s mental well-being by encouraging rich social experiences.Katie Dixon from ASA Landscape Architects explains: “We wanted to create an exciting landscape and have based our concept on the idea of the atom and its energy and motion. By dividing the landscape into smaller areas with the use of paths, avenues of trees, linear planting beds with grasses and Corten steel screens, we wanted to encourage more intimate spaces for smaller group gatherings and meetings. This was further enhanced by including a range of outdoor furniture by mmcité throughout the site to facilitate meeting areas,” she ends.“It was an inspiring project,” Jana Tyrer from mmcité comments on the cooperation, “the architects together with the client have decided to use grey HPL and bicolour orange and grey powder coating of steel construction to match the company colours of UKAEA.”Playful yet very comfortable and calming environment, Culham’s quadrangle makes a perfect example of the new approach to public space, and its set up.

THE LOCATIONThis brand-new student accommodation development is situated in the River Street neighbourhood of Manchester. The striking appearance of the development is down to the architectural design and materials used including the Cor-Ten steel alloy cladding which pairs perfectly with the dark blue painted panels.THE PROJECTThe development comprises 792 student bed spaces including a mix of studios and apartments and offers affordable, stylish, and accessible accommodation in the heart of Manchester whilst being a safe environment for students to learn, grow and live.THE PRODUCTSafety Letterbox discussed the design, layout and fire specifications of the project. After a few options were presented the client chose our FR2 mailbox. The FR2 mailbox is horizontal in front/ out front 2-hour fire-rated (integrity only) mailbox.Our 2-hour fire-rated mailbox range is commonly used within an evacuation route as they are capable of holding backfire or containing a fire for at least 2 hours, satisfying building and fire regulations.The mailboxes we’re powder coated in special colour – MATT Pearl Gold (RAL 1036) giving the mailboxes a stunning high-end aesthetic finish whilst being practical and completely secure. Multiple keys were also supplied, and doors were engraved for easy identification