Zinc-titanium standing seam.
Double and angled standing seams manufactured from zinc-titanium. A strip 70-80 mm wide is used for each seam. For example, a strip 670 mm wide has an effective width covering of ~600 mm. Maximum advised length of a single strip is 10 m. When strips longer than 10 m are necessary consult manufacturer for further information.
ZM Silesia zinc is produced from the highest purity zinc SHG 99.995% with additions of copper and titanium according to EN 988. Available in three finishes. It is durable for over 80 years, corrosion resistant, does not require maintenance, is non-flammable and can be 100% recycled.
Used in different varieties for roof covering (3–7° inclination with additional protection) and cladding. 7° to 15° requires for tangled mat with drainage – over 15° tangled mat usage dependant on the installation substrate. Angled standing seam: recommended over 25°, areas of heavy snow over 35°.
ZM Silesia Zinc Standing Seam
Angled standing seam
Double standing seam
25 x 430 mm/ 530 mm
Minimum pitch: 5°.
38 x 404 mm/ 504 mm
Minimum pitch: 3°.
Initial bright surface that quickly forms a light grey patina, under atmospheric conditions.
Matt dark grey patina surface, chemically created to represent dark weathered zinc.
Matt light grey patina surface, chemically created to represent weathered zinc.
Standard product features
~5.6 kg/m² (for thickness 0.70 mm).
Depending on the length of panels use fixed or sliding clips fastened to the bed with nails, screws or stretcher pins (galvanized or stainless steel).
Other centres on request; consult manufacturer for details.