Zinc-titanium standing seam.
Suitable for ventilated and non-ventilated structures. Roofs can be flat, convex, concave and other non-standard designs. Facades can be flat (90°) and semi-circular.
Double and angled standing seams manufactured from zinc-titanium.
ZM Silesia zinc is produced from the highest purity zinc SHG 99.995% with additions of copper and titanium according to EN 988.
Used in different varieties for roof covering above 5°. Structured underlay required for roofing applications and membrane underlay for cladding applications.
Angled standing seam is recommended over 25° and areas of heavy snow over 35°. Double standing or angled seam system use special fastening with fixed or sliding clips. The clips are made of stainless steel. It is also possible to use transversal joining of strips. Consult manufacturer for details.
Features and benefits:
H74/110 Zinc sheet fully supported roof covering
H74/130 Zinc sheet fully supported wall covering
Initial bright surface that quickly forms a light grey patina, under atmospheric conditions.
Matt dark grey patina surface, chemically created to represent dark weathered zinc.
Matt light grey patina surface, chemically created to represent weathered zinc.
ZM Silesia Zinc Standing Seam
Angled standing seam.
Double standing seam.
Other centres on request; consult manufacturer for details.
25 x 430 mm/ 530 mm.
Minimum pitch: 5°.
38 x 404 mm/ 504 mm.
Minimum pitch: 3°.
~5.6 kg/m² (for thickness 0.70 mm).
Depending on the length of panels use fixed or sliding clips fastened to the substrate with stainless steel nails or screws.