NBS Source
List your products
Application

  • Suitable for ventilated and non-ventilated structures. Roofs can be flat or convex.
  • The best substructure for zinc-titanium is sawn timber planks with pH reaction at 4.5–7.0.

Description

Zinc titanium batten roll system uses a square or trapezium cross section in longitudinal joining and vertical jointing to it.

ZM Silesia zinc is produced from the highest purity zinc SHG 99.995% with additions of copper and titanium according to EN 988. Available in three finishes. It is durable for over 80 years, corrosion resistant, does not require maintenance, is non-flammable and can be 100% recycled.

It is always necessary to use protection in the form of tangled mat with drainage and sealing tape for seam jointing which secure extra protection against humidity.

Used in different varieties for roof covering (3–7° inclination with additional protection) and cladding. 7° to 15° requires for tangled mat with drainage – over 15° tangled mat usage dependent on the installation substrate.

Applications:

  • Suitable for ventilated and non-ventilated structures. Roofs can be flat or convex.
  • The best substructure for zinc-titanium is sawn timber planks with pH reaction at 4.5–7.0.

- Substructure:

  • Planks (in case of fire protecting impregnation use tangled mats).
  • Ventilated 18 mm-thick weather and boil proof (WPB) plywood (use tangled mats).
  • Ventilated oriented strand board OSB3.
  • Hard metal board.
  • Composite panel.
  • Rigid insulation.
  • Metal trapezoidal deck (cladding only).
  • Concrete (use tangled mats).

Underlay:

  • Cladding: ISO-Mat Pro®.
  • Roofing: ISO-Mat Metal®.

Clips:

TS5x20x50 stainless steel fixing strip.

General information
Specification data - Zinc standard temper alloy strips
Product Reference

ZM Silesia Zinc Batten Roll

Thickness

0.70 mm

0.80 mm

Colour/ Finish

Bright rolled

Initial bright surface that quickly forms a light grey patina, under atmospheric conditions.

Carbon

Matt dark grey patina surface, chemically created to represent dark weathered zinc.

Pre-aged

Matt light grey patina surface, chemically created to represent weathered zinc.

Batten centres

470 mm

570 mm

Batten size

40 x 40 x 35 mm

45 mm, round

Standard product features

Load:

~6.30 kg/m² (for thickness 0.70 mm).

Fastening:

With flat hooks fastened to the bed depending on its kind with nails, screws or stretcher pins (galvanized or stainless steel).

Literature
Similar products from Metal Solutions Limited