ZM Silesia Zinc Batten Roll

Application

Suitable for ventilated and non-ventilated structures. Roofs can be flat or convex.

Description

Zinc titanium batten roll system uses a square or trapezium cross section in longitudinal joining and vertical jointing to it. ZM Silesia zinc is produced from the highest purity zinc SHG 99.995% with additions of copper and titanium according to EN 988.


It is always necessary to use protection in the form of structured underlay.


Used in different varieties for roof covering above 3°. Structured underlay required for roofing applications and membrane underlay for cladding applications.



Features and benefits:

  • Available in three finishes.
  • It is durable for over 80 years.
  • Corrosion resistant.
  • Does not require maintenance.
  • Non-flammable and can be 100% recycled.


Substructure:

  • Planks (in case of fire protecting impregnation use tangled mats). The best substructure for zinc-titanium is sawn timber planks with pH reaction at 4.5–7.0.
  • Ventilated 18 mm-thick weather and boil proof (WPB) plywood (use tangled mats).
  • Ventilated oriented strand board OSB3.
  • Hard metal board.
  • Composite panel.
  • Rigid insulation.
  • Metal trapezoidal deck (cladding only).
  • Concrete (use tangled mats).


Underlay:

  • Cladding: ISO-Mat Pro®.
  • Roofing: ISO-Mat Metal®.


Clips:

TS 5 x 20 x 50 stainless steel fixing strip.

General information

Material

Zinc titanium

Uniclass 2015

Pr_25_71_51_99 Zinc standard temper alloy stripsPrimary

CAWS

H74/110 Zinc sheet fully supported roof covering

Specification data - Zinc standard temper alloy strips Enhanced data

Alloy

Zinc-titanium-copper.

Finish

Bright rolled.

Initial bright surface that quickly forms a light grey patina, under atmospheric conditions.

Carbon.

Matt dark grey patina surface, chemically created to represent dark weathered zinc.

Pre-aged.

Matt light grey patina surface, chemically created to represent weathered zinc.

Thickness

0.70 mm.

0.80 mm.

Product Reference

ZM Silesia Zinc Batten Roll

Batten centres

470 mm.

570 mm.

Batten size

40 x 40 x 35 mm.

45 mm, round.

Load

~6.30 kg/m² (for thickness 0.70 mm).

Fixing

With 50mm wide clips fastened beneath the timber batten. Timber batten fixed with stainless steel nails or screws.

Literature

ZM Silesia Application Manual

ZM Silesia Application Manual

Similar products from Metal Solutions Limited

NedZink Batten Roll

NedZink Batten Roll

NedZink Reveal Panel

NedZink Reveal Panel

NedZink Shingles

NedZink Shingles

NedZink Standing Seam

NedZink Standing Seam

Zintek® Batten Roll

Zintek® Batten Roll

Zintek® Reveal Panel

Zintek® Reveal Panel

Zintek® Shingles

Zintek® Shingles

Zintek® Standing Seam

Zintek® Standing Seam

ZM Silesia Zinc Reveal Panel

ZM Silesia Zinc Reveal Panel

ZM Silesia Zinc Shingles

ZM Silesia Zinc Shingles