Verified by manufacturer 5 months ago
A robust second-generation hot melt structural waterproofing system accredited for waterproofing podium decks.
Inverted roofing applications.
Exclusive structural waterproofing designed and manufactured for use on all inverted roofs, podium decks, living roofs, blue roofs and car park decks. A pure polymer modified bitumen compound formulation, combined with reinforcement mesh and high strength protection membrane, results in a tough, seamless, flexible, self-healing monolithic waterproofing system, with incredibly fast installation speeds, that will last the lifetime of the building.
The European Technical Approval enables the system to be CE marked.
Features and benefits:
Wilotekt-Plus achieves a mininum 25 year guarantee up to a ground breaking 35 year insured system guarantee covering materials, design, workmanship and insolvency. The system is designed to last the lifetime of the building.
J31/130 Inverted roof coating
J31/5 Cold deck roof coating
Wilotekt reinforcement mesh.
WILOTEKT reinforcement mesh is used as the first layer to form the reinforcement of the system and to control the flow of the hot-applied WILOTEKT compound. 100 x 1 m rolls. Colour: purple. Roll weight: 15 kg. European Technical Assessment ETA 03/0049.
Water flow reducing layer (WFRL):
High-performance spun bonded polyethylene geotextile designed to improve thermal performance and to help minimize:
The layer also allows water vapour from below to permeate and reduces the risk of condensation being trapped within the construction.
Hytherm ECO XPS and water flow reducing layer.
Axter grey Hytherm ECO XPS is a lightweight, durable, rigid extruded polystyrene XPS insulation board, designed specifically for inverted roofing applications in conjunction with the Axter water flow reducing layer. With excellent lambda insulation performance, a GWP <5, and a BREEAM Green Guide Rating A+ it enables the construction of energy efficient buildings. Achieves CE marking, and satisfies the relevant requirements set out in the NHBC Standards 2021, Chapter 7.1
Hytherm ULTRA XPS and water flow reducing layer.
Hytherm XPS and water flow reducing layer.
Hytherm EPS and water flow reducing layer.
Hytherm HP EPS and water flow reducing layer.
Lightning conductor clips.
Rooflights/ access hatches.
Consult manufacturer for details.
Solar PV Flex.
Interim and final roof inspections by AXTER Quality Assurance (QA) personnel. Final roof inspections by AXTER Quality Assurance (QA) personnel are mandatory for guarantee application.
BBA approved, accepted by all third party building warranty providers such as LABC and NHBC. Fully compliant with The Building Regulations and all relevant British and harmonized European standards.
Wilotekt surface primer.
Wilotekt Compound is a hot applied elastomeric modified bitumen based mastic. Used as the waterproofing compound in the Wilotekt®-Plus structural waterproofing system as well as for filling of joints, cracks and pitch pockets around stanchions, pipework etc.
Top layer/ Capsheet
Wilotekt protection membrane.
Wilotekt protection membrane is a stabilized polyester reinforced SBS elastomeric modified bitumen waterproofing membrane. The membrane is finished on both surfaces with sand. Top layer in the application of Wilotekt-Plus® composite structural waterproofing.
Note: If the podium is to have any soft landscaping such as planted areas, then a detail membrane with anti-root protection must be used.
20-40 mm washed riverstone /ballast.
Washed Riverstone is also used to create perimeter sterile borders to all Axter living and biodiverse roof installations, acting as an effective barrier and restricting the spread of invasive plant species into gutter and drainage outlets.
Adjustable circular base paving slab supports.
Adjustable square base paving slab supports.
Copolymer propylene adjustable paving supports.
Timber decking support adapter.
This Timber Decking Support Adapter enables easy installation of flat decking over a laid to falls flat roof. The joists are held clear of the roof itself, increasing their life and allowing free passage of water to outlets.
Manufactured from extruded aluminium alloy to BS 1474, Quality 6065/T6 (AIMgSi 0.5 F22), this high quality, cost-effective roof edge trim brings a neat finish to flat roof waterproofing.
Axtrim aluminium termination bars.
Axtrim aluminium termination bars are manufactured from extruded aluminium alloy to BS 1474, Quality 6065/T6 (AIMgSi 0.5 F22). Aluminium termination bars will not rust and are not affected by atmospheric pollution. They are colourfast and maintenance free, once installed.
Axtrim GRP termination bars.
Axtrim GRP termination bars are manufactured from pultruded GRP (glass reinforced polyester). It is UV protected and has low coefficient of thermal expansion. GRP termination bars will not rust and are not affected by atmospheric pollution. They are colourfast and maintenance free, once installed.
Axter rainwater outlets are manufactured from 0.7mm stainless steel in a choice of diameters, with a factory bonded flange if required to provide an excellent bonding area with the relevant Axter waterproofing system.
SBS bitumen membrane flange 500mm square suitable for use with the full range of Axter reinforced bitumen membrane (RBM) and hot melt structural waterproofing systems. On our Dual Outlet a bitumen flange is fitted at AVCL level. Axter parapet outlets are manufactured from 0.7mm stainless steel in a choice of diameters, with a factory bonded flange if required to provide an excellent bonding area with the relevant Axter waterproofing system.
SBS bitumen membrane flange 500mm square suitable for use with the full range of Axter reinforced bitumen membrane (RBM) and hot melt structural waterproofing systems. On our Dual Outlet a bitumen flange is fitted at AVCL level.
PVC membrane flange 350mm square suitable for use with Axter Ecoflex/Ecoline PVC single ply waterproofing systems.
Specifically designed for through walls applications or parapets where a high flow rate is required and are supplied with our Hyflow leaf guard as standard. AXTER sump outlet has an outstanding flow rate of 6.1 L/s. As recommended by UK design standard BS EN 12056:3-2000 with a water depth of 35 mm.
Wide parapet outlet.
Used where an increased flow rate (2.02 L/s) is required. A 90° pipe angle and extra-large leaf guards are also available to be used with this unit.
Universal leaf guard.
The stainless steel universal leaf guard is a solid and effective leaf guard which securely clamps to the inside of the outlet stem. Suits all sizes of rainwater outlets.
Parapet leaf guard.
The parapet leaf guard is a solid and effective leaf guard which is securely attached to the inside of the outlet and is fully adjustable to fit all three parapet outlet sizes.
Hyflow leaf guard.
The 1.4301 (304) grade stainless steel Hyflow leaf guard is a high performance leaf guard designed to be used with Axter rainwater outlets. Its use increases flow rate by over 50% compared to standard leaf guards.
Force 4000 Trafic.
Hyranger TS CPV.
For details greater than 500 mm in height.
Force 4000 Flame Free.
Capsheet for combustible details.
Requires Vernis SA Primer and Stickflex as underlayer.
Contains Red List materials
Country of product manufacture
NBS BIM object standard
This BIM object has been authored to meet the requirements of the NBS BIM object standard.
Find out more about the NBS BIM object standard.