Compare

webertec grout FG - Polyester Grout

Name: webertec grout FG - Polyester Grout
Brand: Saint-Gobain Weber
SKU: 8wc3311ZfNeKcE1w7FUwND

Verified by manufacturer today

Standard grade

Third party certifications:

Fast-setting, high strength flowing grout.

Jump to:

Application

Suitable for the following:

Anchoring and fixing.
Fixing airport lighting units.
Fixing vertical bolts, starter bars and dowels.
Grouting anchor bolts and holding down bolts.
Filling gaps of between 5–90 mm (can be bulked out for larger gaps with oven dried sand or aggregate).

Compatible with asphalt concrete.

Do not apply below 10°C (standard grade).

Three-component flowing grout, formulated from polyester.

Features and benefits:

Fast-setting with rapid strength gain – allows loads to be applied within two hours at 20°C.
Standard and rapid grades available – depending upon temperature.
Good adhesion to concrete and asphalt substrates.
Can be bulked out for varying gap sizes, 5–90 mm.
Proven technology with reliability.
Rapid installation and can be used down to 0°C (rapid grade).

Consult manufacturer's literature for preparation and mixing guidelines.

Uniclass	Pr_20_31_53_64 Polyester resin groutsPrimary Pr_20_31_53_52 Metal anchor and fixings grouts
CAWS	G10/310 Anchorages to concrete E40/430 dowel bars E60/325 Grouting E42/330 Anchor bolts

Grades	Standard.
TensileStrength	To ASTM D-638-09, 18.19 MPa.
Elongation	To ASTM D-638-09, 0.98%.
Adhesion bond strength	Steel: To FAA Item P-606-3.5, 10.22 MPa. Cement/ concrete: To FAA Item P-606-3.6, 4.4 MPa. Aluminium: To ASTM D-4541, 3.1 MPa.
Application temperature	10–40°C.
Working time	8–55 minutes (dependent on temperature).