webertec grout FG - Polyester Grout
Verified by manufacturer 21 days ago
Standard grade
Standard grade
Fast-setting, high strength flowing grout.
Application
Suitable for the following:
- Anchoring and fixing.
- Fixing airport lighting units.
- Fixing vertical bolts, starter bars and dowels.
- Grouting anchor bolts and holding down bolts.
- Filling gaps of between 5–90 mm (can be bulked out for larger gaps with oven dried sand or aggregate).
Compatible with asphalt concrete.
Do not apply below 10°C (standard grade).
Description
Three-component flowing grout, formulated from polyester.
Features and benefits:
- Fast-setting with rapid strength gain – allows loads to be applied within two hours at 20°C.
- Standard and rapid grades available – depending upon temperature.
- Good adhesion to concrete and asphalt substrates.
- Can be bulked out for varying gap sizes, 5–90 mm.
- Proven technology with reliability.
- Rapid installation and can be used down to 0°C (rapid grade).
Consult manufacturer's literature for preparation and mixing guidelines.
General information
Material | Polyester |
Shape | Formless |
Uniclass | |
CAWS | G10/310 Anchorages to concrete E40/430 dowel bars E60/325 Grouting E42/330 Anchor bolts |
Specification data - Polyester resin grouts
Grades | Standard. |
TensileStrength | To ASTM D-638-09, 18.19 MPa. |
Elongation | To ASTM D-638-09, 0.98%. |
Adhesion bond strength | Steel: To FAA Item P-606-3.5, 10.22 MPa. |
Application temperature | 10–40°C. |
Working time | 8–55 minutes (dependent on temperature). |