webertec bedding mortar - Polyester-Based Mortar
Verified by manufacturer 5 months ago
Standard grade
Standard grade
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
Polyester-based mortar for bedding and fixing.
Application
Suitable for the following:
- Bedding/ fixing manhole frames.
- Bedding of airport landing lights.
- Bedding of duct frames.
- Fixing precast concrete units e.g. kerb stones.
- Drains.
- Highway fixtures.
Suitable for external use on:
- Concrete.
- Dense brickwork.
- Asphalt.
- Stone.
- Block pavers.
Do not apply below 10°C (standard grade).
Description
Three-component polyester-based mortar for the bedding and fixing of manhole frames, airport landing lights, duct frames and precast concrete units.
Features and benefits:
- Designed for the requirements of DMRB CD534.
- Easy to mix and place.
- Good working time for ease of placement.
- Rapid setting for quick return to service (within two hours at 20°C).
- Rapid grade available for cold weather working or fast completion work. Can be used down to 0°C.
- Good chemical and freeze/ thaw resistance.
- Good bond strength.
- Fully complies with the Design Manual for Roads and Bridges Volume 4, Section 2, Part 5, HA 104/09.
Consult manufacturer's literature for preparation and mixing guidelines.
General information
Material | Polyester |
Shape | Formless |
Uniclass | |
CAWS | Q10/43 Proprietary bedding Q10/545 Proprietary bedding Q25/440 Ready-mixed mortar R12/446 Sealing for concrete manholes – mortar |
Specification data - Paving laying course mortars
Delivery condition | Bagged. |
Grades | Standard. |
TensileStrength | 10 MPa. Guidance for specification option: Tested at 20°C. After 3 hours. |
Application temperature | 10–40°C. |
Working time | 8–55 minutes (dependent on temperature). |
CompressiveStrength | 85 MPa (maximum). Guidance for specification option: Tested at 20°C. After 2 hours: 50 MPa, After 3 hours: 60 MPa, After 24 hours: 85 MPa. |
Flexural strength | 12 MPa. Guidance for specification option: Tested at 20°C. After 3 hours. |
Flexural Modulus | 10–12 GPa. Guidance for specification option: After 3 hours. |
Density | 2100 kg/m³. |
Typical yield | 12 L/pack. |
Sustainability data
Material | Polyester |
Third party certifications
Literature
webertec bedding mortar - Technical datasheet
Solutions for Airports
Marine Infrastructure Guide
Inspiration Guide
Solutions for construction - Introducing Weber
Supply Chain Sustainability School Gold Status