NBS Source
List your products
Application

  • Before it sets, ensure that any excess grout residue is cleaned from the tile faces.

Description

A coarse-textured, flexible, single-part wall and floor grout for interior or exterior use, for joints 2–20 mm wide. It is recommended where limited movement or vibration is expected e.g. under floor heating, timber floors.

Constraints:

Not recommended:

  • Where chemical resistance is required.
  • For use with soft-faced stones or tiles.

Preparation:

  • Check before use that the grout does not cause staining or discolouration of tiles or stones.
  • Seal if necessary.
  • Remove any joint spacers prior to grouting.

Application:

  • Before it sets, ensure that any excess grout residue is cleaned from the tile faces.

General information
Specification data - Cementitious and reaction resin grouts
Product Reference

weberjoint wide flex

Colour

Beige

Grey

Limestone

Standard product features

Joint width:

3–20 mm.

Classification (to BS EN 13888):

CG2.

Third party certifications
  • BS EN 13888 : CG2
Similar products from Saint-Gobain Weber