Verified by manufacturer 2 months ago
New variant
BBA Agrément Certificate
Certificate type
Warrington Fire
Certificate type
ISO 45001 Health and Safety Management
Certificate type
ISO 9001 Quality Management
Certificate type
ISO 14001 Environmental Management Systems
Certificate type
Thincoat render system for render carrier board with an enhanced water resistant textured finish
weberend MT panel silicone system is designed for application onto an appropriately-framed calcium silicate panelled background.
Applied with weberend LAC rapid resin-rich adhesive render coat and strengthened with glass-fibre weber standard meshcloth, this system doesn't require the use of primers, saving time lost waiting for primers to dry.
Water resistant webersil TF is used as the final finish to provide a silicone textured finish available in a wide range of over 100 colours.
Use multiple finishes on the same project
This system can be used in conjunction with the weberend MT panel brick system for building designs which require a mix of brick and render finishes.
[Formerly known as weberend MTR 124P]
weberend MT panel silicone system is a thincoat render system for use on approved render carrier boards.
This system is completed with an enhanced water resistant silicone textured finish available in over 100 colours.
Features and benefits:
Final façade finish:
Reaction to fire:
Certification & requirements:
Suitability:
The installation must be capable of resisting all dead loads and design live loads, including impact and wind loads, and accommodate all thermal movements without damage.
System installation is to be strictly in accordance with Saint-Gobain Weber specification. Please note that any other manufacturer's products used within the system will invalidate the guarantee, and the performance cannot be supported.
Remedial work must be completed prior to the installation of Weber render systems.
All rendering must be in accordance with the relevant recommendations of BS 13914-1: 2005, Design, Preparation and Application of External Rendering and Internal Plastering, BS 8000: Code of Practice for Plastering and Rendering. Consult manufacturer for further details.
Aquapanel Exterior should be restricted to use on buildings no greater than 7.2 m in height. If this restriction is exceeded design advice should be sought from Knauf and recorded.
Recommendations:
Timber or metal frame structure is required, including support rails suitable to receive render substrate boards in accordance with manufacturers recommendations, providing an in-plane and of adequate thickness for appropriate support and stiffness (limit mid span deflections L/200 and cantilever deflections to L/150. Board mid-span deflections should be limited to L/500) to receive weberend MT reinforced render system within the stated deflection limits or edge protrusions.
Prior to installation of the weberend MT system, ensure the manufacturer of the proposed approved substrate boards are contacted to obtain their fixing recommendations and ensure the boards suitability in withstanding the necessary wind load requirements for the specific project.
Color | Beige Black Blue Bronze Brown Manufacturer guidance160 standard colours available |
Finish | Silicone Guidance for specification option: Contains 30% silicone. Textured Manufacturer guidancewebersil TF |
Shape | Formless |
Uniclass | |
CAWS | M20/160 Proprietary cement gauged render M20/19 Proprietary cement gauged render |
Product range |
First undercoat | weberend LAC rapid.Manufacturer guidanceTo be applied in two coats, incorporating meshcloth insulation board. Apply 2–3 mm thick, incorporating weber meshcloth. Allow for partial take-up then apply further 3 mm to form a nominal 6 mm thick monolithic coat. Further application instructions are available from the manufacturer. |
Second undercoat | weberend LAC rapid. |
Final coat | webersil TF, colour.Guidance for specification option: Available in over 100 colours. See link in description or consult manufacturer's literature, and insert requirements. Manufacturer guidanceFinishing coat:
|
Beads | Render only beads are available in coated galvanized, stainless, coated aluminium or rigid plastic in 3 m and 2.5 m lengths. |
Substrate board | Knauf Aquapanel Exterior. Siniat Bluclad. Glasroc X sheathing board. Manufacturer guidanceRecommended boards, tested for compatibility with the weberend MT system and hold a BBA certificate. More may be available, consult manufacturer for an up to date list of recommended boards tested for this system. |
Cavity barriers | Type, thickness, density and compressive strength to be determined by the design team. Guidance for specification option: Consult manufacturer for details. |
Accessories/ Other requirements | Guidance for specification option: Consult manufacturer and insert requirements. Manufacturer guidanceRender only beads, if required by the system or product, or if specified, shall be of appropriate design, gauge and material - consult manufacturer for details. Some available accessories include:
Where window frames incorporating window cills are to be provided by others, then the cill must project sufficiently beyond the outside line of the Saint-Gobain Weber render system to a recommended 40 mm minimum - consult manufacturer for further details. |
Reinforcement | 3.5 x 3.5 mm meshcloth. |
Weight | 160 g/m². |
Roll size | 1 x 50 m. |
Fire performance: | A2-s1,d0 when classified in accordance with BS EN 13501-1. |
Country of material origin | United Kingdom |
Country of product manufacture | United Kingdom |
NBS BIM Object Standard
This BIM object has been authored to meet the requirements of the NBS BIM Object Standard.
Find out more about the NBS BIM Object Standard.
Platform | Compatible | Version |
---|---|---|
![]() | - | 1 |
![]() | - | 1 |
BBA Agrément Certificate
BBA Agrément Certificate (20/5790) Product Sheet 1 (weberend MT with Knauf Aquapanel exterior cement board)
BBA Agrément Certificate
BBA Agrément Certificate (20/5790) Product Sheet 2 (weberend MT with Siniat Bluclad board)
BBA Agrément Certificate
BBA Agrément Certificate (20/5790) Product Sheet 3 (weberend MT with Glasroc X sheathing board)
Warrington Fire
weberend MT panel silicone system - Reaction to Fire Certificate
ISO 45001 Health and Safety Management
ISO 45001:2018
ISO 9001 Quality Management
ISO 9001:2015
ISO 14001 Environmental Management Systems
ISO 14001:2015
Weber Renders & Decorative Finishes
weberend LAC rapid - Technical datasheet
webersil TF - Technical datasheet
Inspiration Guide
Solutions for construction - Introducing Weber
Weber synthetic colour guide
eHome2
Guide to renders and decorative finishes for modern methods of construction (MMC)
Supply Chain Sustainability School Gold Status