NBS Source
List your products
Description

Preblended, single-component, polymer-modified, cementitious mortar needing only mixing with water to produce a high quality surface levelling mortar and pore filler for most concrete surfaces.

Uses:

  • Patch repairs to concrete floors.
  • Thin bonded vertical repairs to concrete.

Benefits:

  • Resistant to water penetration.
  • Excellent adhesion.
  • Faster strength development than ordinary sand-cement mortar.

Constraints:

For deep repairs in excess of 100 mm, other products available, consult Weber for exact details. Weber.cem mortar has greater chemical resistance to mild acid attack than normal sand/cement mixes, but in situations liable to chemical spillage weber.tec resin-based systems are more suitable.

Curing:

Good curing is essential. Immediately after the finishing operation, apply Weber.tec ritecure byspray. Do not use Weber.tec ritecure between layers or where a finishing coat is to be applied, but spray with webercote primer and cover with close contact polythene sheet.

This product has been formulated to comply with the requirements of BS EN 1504-3.

General information
Specification data - Concrete repair mortars
Product Reference

webercem mortar

Standard product features

Technical characteristics:

  • Flexural strength at 28 days: 6.0 N/mm².
  • Tensile strength at 28 days: 3.5 N/mm².

- Compressive strength to BS EN 12190:1999:

  • Three days: 35 MPa.
  • Seven days: 45 MPa.
  • 28 days: 53 MPa.

Similar products from Saint-Gobain Weber